Model: PF HT 750DRD

Model# PF HT 750DRDREMANUFACTURED TRANSMISSION

ALLISON - HT 750

General Rating:

General Specification & Application Data

w w w . p o w e r f o r c e . c o m

Application ratings vary significantly from general ratings. Contact Central Power Systems & Services for specific vocational ratings.

Transmission Model and ApplicationsOriginal Manufacturer Allison

Allison Series 700

Allison Model Number HT 750 DRD (Deep Ratio)

Remanufacturer POWERFORCE ®

POWERFORCE ® Model Number PF HT 750DRD

Applications Dump Truck, Refuse Hauler

Lowboy Truck, Hook & Ladder Truck

Transit Mixer, Fire Truck

Rear Loader (Refuse)

Agricultural

Construction Equipment Hauler

Wrecker (Tandem Axle)

Logging Truck

Public Utility (All Wheel Drive Tandem Axle)

Other Applications Available

Transmission SpecificationsFull Load Governed Speed Diesel 1900-2500 rpm

Engine Mounting SAE#1 Flywheel HousingAdditional Adaptation Required

Remote mounting option available

Oil Pan Options 4.5 Inch, 6.0 Inch, 7.0 Inch, 8.5 Inch

Fluid Type TES™ 295 or TES™ 439 Approved Fluid

Torque Converter OptionsRatios TC 470 (2.83:1), TC 487 (1.50:1),

TC 488 (1.70:1), TC 495 (2.39:1), TC 496 (1.78:1), TC 497 (2.72:1), TC 498 (2.45:1), TC 499 (1.91:1), TC 777 (2.63:1)

Gear Ratio (Gear ratio does not include torque converter ratio)

1st Range 7.97:1 4th Range 1.38:1

2nd Range 3.19:1 5th Range 1.00:1

3rd Range 2.02:1 Rev. Range -4.72:1

Power Take-Off Gear Ratings * Intermittent ContinuousTurbine Driven Operation 400 lb ft 300 lb ft

Engine Driven Operation 260 lb ft 200 lb ft

* Rating for each of Two Drive Provisions. Both may be used concurrently for a combined total of 400 HP continuous

Shift SequenceConverter-Lockup All Ranges Lockup-To-Lockup

(2-5) 2C-2L-3C-3L-4C-4L-5C-5L (2-5) 2C-2L-3L-4L-5L

(2-4) 2C-2L-3C-3L-4C-4L (2-4) 2C-2L-3L-4L

(2-3) 2C-2L-3C-3L (2-3) 2C-2L-3L

(2) 2C-2L (2) 2C-2L

(1) 1C-1L (1) 1C-1L

Second Gear Start Option Option Available

C= Drive through the torque converter; L= Drive with Lockup engaged

Power Ratings Unit Diesel Gasoline

Max Net Input Power Range HP 445 - 500 N.A.

Max Net Input Torque Range lb ft 1380 - 1575 N.A.

Model shown is a remanufactured POWERFORCE ® HT 750DRD

PowerForce® Corporate Of f ice ▪ 4501 W. I r v ing ▪ Wichi ta ▪ KS 67209 ▪ Ph 316.943.1231 ▪ Fax 316.943.4560

POWERFORCE ® - A Premium Brand for Power and DriveRemanufactured Transmissions:POWERFORCE ® is the premium brand offered by Central Power Systems & Services. With the expertise to produce, in volume, a quality, durable, reliable, and price competitive remanufactured Allison transmission.

All POWERFORCE ® transmissions are completely remanufactured…..................NOT rebuilt!

By using proprietary factory specifications, lean manufacturing procedures, genuine OEM parts, state-of-the-art test equipment, and proper final calibrations, POWERFORCE ® transmissions guarantee the highest quality and best value for our customers.

As an Allison Distributor since 1953, it’s our #1 goal to ensure quality first. All POWERFORCE ® Allison transmissions are remanufactured back to the original factory specifications. With up-to-date training and factory certified overhaul specialists, it’s our pleasure to offer you POWERFORCE ® the most dependable remanufactured product available.

POWERFORCE ® - A Premium Brand For Power and Drive© 2013 POWERFORCE® a registered brand of Central Power Systems & Services. All rights reserved.Specifications are subject to change without notice.

* All measurements are approximate and for estimation purposes only. ** The amount of transmission fluid shown in the following chart does not include the amount required to fill external circuits

Model: PF HT 750DRD Transmission Transmission Configuration Details

POWERFORCE ® Remanufactured Transmissions

POWERFORCE ® Transmissions comply with applicable codes and standards

Operators of the transmissions remanufactured by the POWERFORCE ® team are assured a quality unit that considerably enhances the life of the equipment. The following below summarizes why it’s wise to select POWERFORCE ®. A Premium Brand For Power and Service:

• Remanufactured….not rebuilt or repaired

• RemanufacturedbacktotheoriginalfactoryOEMspecifications

• AcertifiedAllisontransmissionremanufacturingdistributor

• All transmissions are dyno’d, pressure and leak checked, and load tested

• A custom built remanufacturing facility

• Large inventory for premium remanufactured swing transmissions

• 60 years of transmission experience as an Allison distributor

• Factorycertifiedtransmissionspecialists

• Established track record in performance and reliability

• Backed-up by the POWERFORCE ® warranty

Ref# DS- 30750DR

w w w . p o w e r f o r c e . c o m

All data subject to change without notice. The information in this white-page specification is believed to be accurate but all recommendations are made without warranty, since the conditions of use are beyond Central Power Systems & Services control. Central Power Systems & Services disclaims any liability in connection with the use of this information, and does not warrant against infringement by reason of the use of any of its products in combination with other material or in any process. Central Power Systems & Services warrants only that the product complies with specifications agreed to in contracts of sale. Central Power Systems & Services reserves the right to change any of the technical information and data detailed in this paper.

Fluid Specifications Transmission Dimensions * (All dimensions are in inches)Inital Fill US Quarts Per Pan Size ** Fluid Type L = Length W = Width H = Height Model Dry Weights lbs (Note weights with PTO & Retarder Options)

4.5” 6.0” 7.0” 8.5” TES™ 295 or TES™ 439 Approved Fluid 43.4 21.7 26.6

Base Model With PTO With Retarder Retarder/PTO

34 30 30 42.8 1500 1075 1140 1260

PowerForce® Corporate Of f ice ▪ 4501 W. I r v ing ▪ Wichi ta ▪ KS 67209 ▪ Ph 316.943.1231 ▪ Fax 316.943.4560