Model HWT-F1000S The Next Necessity -...
1
2 1/4" 6-1/8" 12 1/2 " 10-7/8" 6-3/4" Stainless Steel Tank dispenses filtered near-boiling 200˚F water instantly Water dispenser sold separately Model HWT-F1000S Submittal Sheet Job Specifications Specifications Instant Hot Water Dispensers HC728-16C-83-10 Dimensions • 2/3-gallon stainless steel tank • Easy to adjust temperature control • Tool-free tank connections and dry start protection to ease installation • Provides 60 cups/hour of near-boiling water • F-1000S Filtration System included for fresher tasting water - Reduces particulates, chlorine taste and odor for clean, refreshing taste - Sanitary, quick-change filter cartridge makes replacement easy • 115 volts, 750 watts, 6.25 amps • For use with InSinkErator instant hot water dispensers (excluding model Hot1) • Unit not for commercial/industrial use Capacity Thermostat 2/3-gallon stainless steel tank dispenses 60 cups of 200˚F water per hour Electrical 115 volts, A.C., 750 watts, 6.25 amp heating element with grounded three (3) prong plug Insulation Recommended Supply Pressure Shipping Weight Approximately 7.7 lbs. 30-125 psi Meets U.L. 94HF-1 flammability specification Snap-action, adjustable from 160˚F to 210˚F (factory pre-set at 200˚F) Sample Specification The Next Necessity ™ 1-800-558-5700 USA Canada www.insinkerator.com 1-800-561-1700 www.insinkerator.ca Complies with California Lead Plumbing Law The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. © 2016 InSinkErator, InSinkErator ® is a business unit of Emerson Electric Co. All Rights Reserved. Instant hot water dispenser(s) shall be equipped with an InSinkErator Model HWT-F1000S stainless steel tank with filtration, adjustable temperature from 160°F to 210°F and instant, self-closing hot valve. In-Home Parts and Service Warranty* Tank: 3-years Filtration System: 1-year (excluding replaceable filter cartridge) * The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit. US Pat. D532,497 S (tank enclosure)
Transcript of Model HWT-F1000S The Next Necessity -...
2 1/4"6-1/8"
12 1/2"10-7/8"
6-3/4"
Stainless Steel Tank dispenses filterednear-boiling 200̊ F water instantly
Water dispenser sold separately
ModelHWT-F1000S
Submittal Sheet
Job Specifications
Specifications
Instant Hot Water Dispensers
HC728-16C-83-10
Dimensions
• 2/3-gallon stainless steel tank
• Easy to adjust temperature control
• Tool-free tank connections and dry start protection to ease installation
• Provides 60 cups/hour of near-boiling water
• F-1000S Filtration System included for fresher tasting water
- Reduces particulates, chlorine taste and odor for clean, refreshing taste
- Sanitary, quick-change filter cartridge makes replacement easy
• 115 volts, 750 watts, 6.25 amps
• For use with InSinkErator instant hot water dispensers (excluding model Hot1)
• Unit not for commercial/industrial use
Capacity
Thermostat
2/3-gallon stainlesssteel tank dispenses 60 cups of 200˚F water per hour
Electrical 115 volts, A.C., 750watts, 6.25 ampheating elementwith grounded three (3) prong plug
Insulation
RecommendedSupply Pressure
Shipping Weight Approximately 7.7 lbs.
30-125 psi
Meets U.L. 94HF-1flammabilityspecification
Snap-action,adjustable from160̊ F to 210̊ F (factory pre-setat 200̊ F)
Sample Specification
The Next Necessity™
1-800-558-5700USA
Canada
www.insinkerator.com
1-800-561-1700www.insinkerator.ca
Complies with California Lead Plumbing Law
The Emerson logo is a trademark and a service mark of Emerson Electric Co.
InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the
right to change or discontinue models.
© 2016 InSinkErator, InSinkErator® is a business unit of Emerson Electric Co. All Rights Reserved.
Instant hot water dispenser(s) shall be equipped with an InSinkErator Model HWT-F1000S stainless steel tank with filtration, adjustable temperature from 160°F to 210°F and instant, self-closing hot valve.
In-Home Parts and Service Warranty*Tank: 3-yearsFiltration System: 1-year (excluding replaceable filter cartridge)
* The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit.
US Pat. D532,497 S (tank enclosure)
