MKTG814: Managing Customer Relationships
Transcript of MKTG814: Managing Customer Relationships
MKTG814:
Managing Customer Relationships
Unit Outline
Convenor & Lecturer
Mr. Paul Benning
Semester 1
2009
1
CONTENTS
1. About this Unit 2
2. Teaching Staff 2
3. Classes 3
4. Required and Recommended Text and Reading Materials 4
5. Unit Web Page 5
6. Learning Objectives and Outcomes 5
7. Teaching and Learning Strategy 6
8. Student Workload 7
9. Assessment 8
10. Referencing Guidelines 12
11. Plagiarism 13
12. Determination of Overall Grade 14
13. Student Support Services 15
2
MACQUARIE UNIVERSITY
FACULTY OF BUSINESS AND ECONOMICS
UNIT OUTLINE
Year and Semester: 2009, Semester 1
Unit convenor: Mr. Paul Benning
Students in this unit should read this unit outline carefully at the start of semester.
It contains important information about the unit. If anything in it is unclear, please
consult the teaching staff in the unit.
1. ABOUT THIS UNIT
MKTG814: Managing Customer Relationships is a postgraduate Business Management
course offered at Macquarie University, in Semesters 1 and 2, 2009.
This unit will develop students' understanding of the concept of Customer Relationship
Management (CRM); promote a deeper understanding of the process of CRM; and
encourage students to become sensitive to the value of developing deep relationships with
customers and the value of these relationships in the long-term success of any
organisation. Students will analyse domestic and international case studies and will
develop a CRM strategy for an organisation as part of the assessment.
MKTG814: Managing Customer Relationships is a 4 point credit subject, included in the
Master of Commerce and Master of International Business degree programs.
2. TEACHING STAFF
Lecturer: Mr. Paul Benning
Email: [email protected]
Telephone: +61-2-9850-8526
Fax: +61-2-9850-9956
3
3. CLASSES
The unit consists of 6 days of class, where each class is 6 hours long, held on a Saturday
or Sunday, commencing at 10am and finishing at 5pm.
The dates for the classes will be:
• Day 1: Saturday 7th
March
• Day 2: Saturday 28th
March
• Day 3: Saturday 2nd
May
• Day 4: Saturday 16th
May
• Day 5: Sunday 17th
May
• Day 6: Saturday 6th
June
Lectures will be held in the lecture theatre E6A102.
The timetable for classes can be found on the University web site at:
http://www.timetables.mq.edu.au/
It is an assessment requirement of this unit that students attend classes.
4
4. REQUIRED AND RECOMMENDED TEXTS AND READING MATERIALS
Prescribed Textbook:
• Buttle, F., Customer Relationship Management: Concepts and Tools (Elsevier,
2004)
Beyond the designated text, it is strongly recommended that students refer to the
following books:
• The Customer Revolution – Patricia B. Seybold with Ronni T. Marshak and
Jeffrey M. Lewis
• Managing the Customer Experience - Shaun Smith & Joe Wheeler (FT
Prentice Hall 2002)
• Customer Experience Management: A revolutionary approach to connecting
with your customers – Bernd H. Schmitt
• Texts from Don Peppers and Martha Rogers:
o The One to One Manager: Real-World Lessons in Customer
Relationship Management
o The One to One Fieldbook
o The One to One Future
o Managing Customer Relationships: A Strategic Framework
Other recommended texts include:
• The Loyalty Effect: The Hidden Force behind Growth, Profits, and Lasting
Value – Frederick F. Reichheld
• Managing Customer Value: Creating Quality & Service that Customers Can
See - Bradley T. Gale
• The Only Thing That Matters: Bringing the Power of the Customer into the
Center of Your Business – Karl Albrecht
• Market-Based Management: Strategies for Growing Customer Value and
Profitability – Roger J. Best
In addition, a number of articles have been reserved for students:
• Zero Defects – Alan W. H. Grant and Leonard A. Schlesinger
o Harvard Business Review Sept-Oct 1990
• Realise Your Customers’ Full Profit Potential – Alan Grant & Leonard
Schlesinger
o Harvard Business Review Sept-Oct 1995
• Business Marketing: Understand What Customers Value – James C. Anderson
& James A. Narus
o Harvard Business Review Nov-Dec 1998
• Co-opting Customer Competence – C.K. Prahalad & Venkatram Ramaswamy
o Harvard Business Review Jan-Feb 2000
• Spend a Day in the Life of Your Customers – Francis J. Gouillart and
Frederick D. Sturdivant
o Harvard Business Review January-February 1994
5
5. UNIT WEB PAGE
The web page for this unit can be found at: https://learn.mq.edu.au/
Available on the unit web page will be:
• Lecture presentations
• Case studies
• Past final examinations for the unit
• Examples of individual assignments
• Examples of group reports
• Examples of group presentations
6. LEARNING OBJECTIVES AND OUTCOMES
The learning objectives of this unit are to explore the concepts, theories and current
issues pertaining to CRM, specifically:
1. Introduce the concepts and theories of CRM
2. Obtain competence in understanding the role of CRM, in the framework of how
public and private organisations utilise CRM in their operations
3. Explore the domestic and global trends and developments that are occurring in
CRM
In addition to the discipline-based learning objectives, all academic programs at
Macquarie University seek to develop students’ generic skills in a range of areas. One of
the aims of this unit is that students develop their skills in the following:
• Foundation skills of literacy, numeracy and information technology
• Self-awareness and interpersonal skills
• Communication skills
• Critical analysis skills
• Problem-solving skills
• Creative thinking skills
6
7. TEACHING AND LEARNING STRATEGY
The unit consists of 6 days of class, where each class is 6 hours long, held on a Saturday
or Sunday, commencing at 10am and finishing at 5pm.
Classes will comprise:
• Lectures
• Class discussions
• Group work
• Student presentations
• Guest presentations
Students are encouraged to participate fully in all class activities.
A summary of the topics covered in each class is provided in the table below.
LECTURE TOPIC
Day 1 Introduction to CRM
Day 1 Role of CRM in Organisations
Day 1 Evolution of CRM
Day 1 Concepts and Theories in CRM
Day 2 CRM Value Chain Model: Overview
Day 2 CRM Value Chain Model: Primary Stages
Day 3 CRM Value Chain Model: Supporting Conditions
Day 3 Group Presentations
Day 4 Guest Presentation
Day 4 Industry Best Practise
Day 4 Case Studies in CRM
Day 5 Global Trends and Developments in CRM
Day 5 Revision of Unit
Day 6 Final Examination
7
8. STUDENT WORKLOAD
In order to optimise the value of learning, it is strongly advised to prepare before each
class, enthusiastically participate in each class and then reflect on each class.
The amount of time spent out of class will vary for each individual, depending on
competencies and proficiency in any area. An approximation is between 80-120 hours
per unit, which is an average of 8-12 hours per class. Effective learning requires
interaction between you, your lecturer and your peers. The better prepared you are before
each class the greater the learning value from more focused questions and discussions. In
addition, reflecting on what you have learned is an important process for you to
confidently apply your newly learned skills. Therefore, in order to gain the most learning
value from the synergistic relationship between your support materials and your specific
unit material it is highly recommended you follow these steps for each class:
Before Each Class
1. Read the chapters of the prescribed text and any other materials that the
lecturer has advised
2. Pre-read the lecture presentation that will be available for download on the
unit web page, which can be found at: https://learn.mq.edu.au/
3. Complete any group work that is required for the class
During Each Class
1. Contribute to each session with focused questions and discussions
2. Identify clearly what you learnt and what you may be unsure of from the class
3. Ask your lecturer about any questions or problems from this or any other class
4. Ensure that you understand what is required of you for the next class
After Each Class
1. Review the content covered in the class
2. Identify clearly what you learnt and what you may be unsure of from the class
and try to resolve anything that you are unsure of
3. Prepare for the next class, such as reading the relevant chapters from the
prescribed text, or any other materials
4. Try to work on assessment tasks after the class, when concepts, theories and
current issues pertaining to CRM are fresh in your mind
8
9. ASSESSMENT
The assessment for this unit has been designed to help students learn and apply the
concepts, theories and current issues pertaining to CRM.
The purpose of the assessment is to assess:
1. The extent to which the concepts, theories and ideas introduced are understood
2. The ability to apply these concepts, theories and ideas to public and private
organisations
3. The ability to develop critical analysis, problem solving and creative thinking skills
related to the area of CRM through common forms of business communication
A summary of the assessment, due dates and the marks for each is provided in the table
below.
ASSESSMENT MARK (%) DUE DATE
Individual Assignment 30% 30th
May
Group Report 20% 16th
May (Day 4)
Group Presentation 10% 16th
May (Day 4)
Final Exam 40% 6th
June (Day 6)
Detailed information pertaining to each piece of assessment is provided on the following
pages.
9
Individual Assignment (30%)
Students will have a choice between three options, these being:
1. Industry Report
• Select an industry to base your report on, such as banking, airlines,
telecommunications, etc and perhaps limit to a specific geography, such as
Australia, Thailand, France, Asia Pacific, Europe etc
• Identify the key organisations in the industry and detail the divergent CRM
strategies that are used by the key organisations
• Provide insight as to which CRM strategies appear to be the most successful in
the industry
• Provide insight as to what changes in the organisations CRM strategies may occur
in this industry over the next 3 year period
2. Benchmark Report
• Select two competing organisations to base your report on, such as Virgin Blue
and Jetstar
• Compare their CRM strategies in detail
• Identify strengths and weaknesses of each organisation’s CRM strategy
• Provide insight as to what are the best aspects of each organisations CRM strategy
• Provide insight as to which organisation’s CRM strategy will be the most
successful over the next 3 year period
3. Article
• Write an article suitable for a business publication based on CRM, the article
could be similar to those appearing in:
o BRW, CFO Asia, Advertising Age, New World Marketing etc
• The scope of the article could have a broad perspective of CRM, or could focus
on a specific area
• Possible topics could include:
o How CRM could be successfully applied to a specific industry
o The future of CRM in consideration of developments in IT
In terms of the format and submission of the individual assignment:
• The due date is 30th
May
• There is no word limit, whatever is necessary to communicate all areas of the
report or article
• The industry and benchmarking reports must be prepared as a formal business
report, written from the perspective of you being a consultant to the organisation
• The article is expected to comprise less words than the industry or benchmarking
reports, prepared similarly to those appearing in leading business publications
• Examples of reports and articles are available on the unit web page, which can be
found at: https://learn.mq.edu.au
• A softcopy of the report must also be submitted, by email, to the lecturer
10
Group Written Report (20%)
Each group is to select an appropriate organisation, to investigate the current Customer
Relationship Management (CRM) strategy being undertaken and to provide insight as to
how it may be modified over the next 3 years.
The report should address the following major areas in detail, in addition to any other
areas that are considered relevant to the organisation:
1. The type of CRM strategy the organisation currently has in operation and what
it’s objectives appear to be
2. If the current CRM strategy employed by the organisation is successful, if so why,
if not why not
3. What concepts, theories, trends and developments may be suitable for the
organisation to utilise
4. Forecasting over the next 3 years to provide advice to the organisation concerning
what changes if any, should be made to their CRM strategy
In addressing these areas, the report should draw on all relevant areas covered in the
course, such as:
1. Why is a CRM strategy required by the organisation?
2. What is the level of importance for the organisations CRM strategy?
3. What are the organisations competitors doing in terms of CRM initiatives?
4. What resources are required?
5. What are the budget implications and ROI?
6. How can the CRM strategy be implemented, improved or managed over time?
Group Presentation (10%)
To accompany the submission of the group report, each group must present a brief
presentation, highlighting the key areas of their report, where:
• The presentation is to be no longer than 15 minutes, with an additional 5 minutes
allocated for class discussion relating to the presentation
• Presentations will occur in class on the 16th
May (Day 4)
In terms of the format and submission of the report and presentation:
• The due date is 16th
May (Day 4)
• The report must be prepared as a formal business report, written from the
perspective of your group being consultants to the organisation
• For the report, there is no word limit, whatever is necessary to communicate your
work
• Examples of reports and presentations are available on the unit web page, which
can be found at: https://learn.mq.edu.au
• A softcopy of the report must also be submitted, by email, to the lecturer
11
Final Examination (40%)
There will be a 2 hour final examination worth 40% of the grade for the unit.
Details of the final examination include:
• 2 hour, open book examination
• All of the topics covered in the course will be examinable
• Held on Saturday 6th
June, commencing at 11am
• Examples of past final examinations are available on the unit web page, which
can be found at: https://learn.mq.edu.au
The only exception to not sitting an examination at the designated time is because of
documented illness or unavoidable disruption. In these circumstances you may wish to
consider applying for special consideration. Information about unavoidable disruption
and the special consideration process is available at:
www.reg.mq.edu.au/Forms/APSCon.pdf
It is Macquarie University policy not to set early or delayed examinations for individuals
or groups of students. All students are expected to ensure that they are available until the
end of the teaching semester, that is the final day of the official University examination
period, and can attend the exam at the designated time and place.
12
10. REFERENCING GUIDELINES
All sources of information used in the individual assignment, group report and
presentation such as books, articles, papers an websites must be consistently referenced
conforming to the Journal of Marketing reference standards (see below).
Book Reference:
<<Body of Assignment>>
“Lifetime value is an important theme in CRM. The LTV measures a customer’s profit-
generation for a company.” (Buttle, 2004, 127)
<<References Section>>
Buttle, Francis (2004), Customer Relationship Management Concepts and Tools, Elsevier
Butterworth-Heinemann, Oxford UK
Journal/Article Reference:
<<Body of Assignment>>
“There appears to have developed a resistance from consumers towards maintaining their
participation in loyalty programs when they have not seen any tangible sign of reward
after 4-6 subsequent purchases with the organisation.” (Noon, 2007, 72)
<<References Section (at end of paper)>>
Noon, Edward (2007), “Customer Retention Strategies for Fast Moving Consumer
Goods”, Journal of Consumer Research, Vol 12, No 4, 62-73
Website/Online Referencing:
Use the electronic source-referencing standard as outlined for Journal of Marketing
citation standards:
<<Body of Assignment>>
(Advertising Age, 2009)
<<References Section (at end of paper)>>
Advertising Age (2009), "Vodafone Launches its new CRM initiative",
http://adage.com, Accessed: 12 February
13
11. PLAGIARISM
The University defines plagiarism in its rules: "Plagiarism involves using the work of
another person and presenting it as one's own." Plagiarism is a serious breach of the
University's rules and carries significant penalties. You must read the University's
practices and procedures on plagiarism. These can be found in the Handbook of
Undergraduate Studies or on the web at: http://www.student.mq.edu.au/plagiarism/
The policies and procedures explain what plagiarism is, how to avoid it, the procedures
that will be taken in cases of suspected plagiarism, and the penalties if you are found
guilty. Penalties may include a deduction of marks, failure in the unit, and/or referral to
the University Discipline Committee.
14
12. DETERMINATION OF OVERALL GRADE
The overall grade for the unit is calculated by adding the raw marks for the 3 assessment
tasks and the final examination, to obtain an overall raw mark out of 100. This overall
raw mark out of 100 reflects the grade given, for example an overall raw mark of 72/100
would receive a Credit (Cr) as the final grade.
Macquarie University’s Academic Senate has a set of guidelines on the distribution of
grades across the range from fail to high distinction. Your final result will include one of
these grades plus a standardised numerical grade (SNG).
On occasion your raw mark for a unit (i.e., the total of your marks for each assessment
item) may not be the same as the SNG that you receive. Under the Senate guidelines,
results may be scaled to ensure that there is a degree of comparability across the
University, so that units with the same past performances of their students should achieve
similar results. It is important that you realise that the policy does not require that a
minimum number of students are to be failed in any unit. The process of scaling does not
change the order of marks among students. A student who receives a higher raw mark
than another will also receive a higher final scaled mark.
Grade Definitions
ABBREVIATION GRADE
NAME Mark % DESCRIPTION
HD High
Distinction
85-100%
Denotes performance that meets all unit
objectives in such an exceptional way and with
such marked excellence that it deserves the
highest level of recognition.
D Distinction 75-84%
Denotes performance that clearly deserves a
very high level of recognition as an excellent
achievement in the unit.
Cr Credit 65-74%
Denotes performance that is substantially better
than would normally be expected of competent
students in the unit.
P Pass 50-64%
Denotes performance that satisfies unit
objectives.
PC Pass Conceded 45-49% Denotes performance that meets unit objectives
only marginally.
F Fail 0-44%
Denotes that a candidate has failed to complete
a unit satisfactorily
FA Fail Absent
0-44%
Denotes that a candidate has failed to complete
a unit satisfactorily and was absent from a
compulsory final examination
W Withdrawn No grade as student withdrew with permission
prior to final examination
I Incomplete Incomplete Grade yet to be determined as all
assessment tasks have not yet been completed
IS Incomplete
Supplementary
Supplementary examination approved and yet
to be completed.
15
13. STUDENT SUPPORT SERVICES
Macquarie University provides a range of Academic Student Support Services. Details of
these services can accessed at http://www.student.mq.edu.au.