Mk5 WORK-CLASS LARS · The overall size of the Mk5 has been carefully configured to ensure that it...
Transcript of Mk5 WORK-CLASS LARS · The overall size of the Mk5 has been carefully configured to ensure that it...
TECH SAFESYSTEMS
an company
PRODUCT GUIDE
Mk5 WORK-CLASS LARS
The Mk5 Work Class LARS is designed for work class Remotely Operated Vehicles (ROVs) up to 5,000kg in weight. The combination of extending A-Frame and Snubber Rotator enables the Tether Management System (TMS) and ROV to be picked up directly off the deck, extended outwards and into the water without the need for manual intervention. Improving the safety of personnel in all stages of launch and recovery.
The snubber rotator is fitted with pitch and roll control. This acts as both a damper during launch and recovery, and, as a fully driven control mechanism to ensure alignment of the umbilical when the ROV is deployed. The system helps prevent damage to the umbilical increasing service life.
The overall size of the Mk5 has been carefully configured to ensure that it is transportable by road without an escort. The erection and stow-age of the A-Frame is ram operated and collapses down further to reduce the height for transportation.
EXTENDINGA-FRAME
HYDRAULICPOWER PACK
ROV WORK PLATFORM(OPTIONAL)
FOLD DOWN PLATFORM(OPTIONAL)
HYDRAULIC WINCH(REMOVABLE)
SNUBBERROTATOR
Tech Safe Systems Ltd provide Launch and Recovery Systems (LARS) that feature a combined umbilical winch and overboarding system on a base frame. Our LARS are designed specifically for deploying and recovering tethered powered objects, such as: towed arrays, ROVs or any other underwater vehicles.
For more information, contact TSS on: +44 (0)1493 444454 or email: [email protected]
LAUNCH & RECOVERYMk5 WORK-CLASS LARS
Dimensions shown in this leaflet do not always correspond to the standard specifications. Design and specifications are subject to change without prior notice. Dimensions may vary, subject to technical changes.
an company
TECH SAFESYSTEMS
Tech Safe Systems Ltd. Shuttleworth Close, Gapton Hall Ind. Est., Great Yarmouth, Norfolk NR31 0NQemail: [email protected] www.techsafe.co.uktel: +44 (0)1493 444454
2157 2650
2050
1539
2300 2150
6500
3200
5573
7887
33953985
4625
3570
3400
SPECIFICATIONS
Dimensions (mm): 6,500 (L) x 3,200 (W) x 3,400 (H)
Launch SWL (kgs): Up to 5,000
Outreach (m): Up to 4.0
Operating Conditions: Lloyds Sea State 6, 3.9m Significant Wave Height
Power Requirements: 380-460V AC 3Ph 50/60Hz
Rating Options: Safe Area or Zone 2 ATEX
Design Temperature: -20°C to +50°C
Certification: BS EN 12079 for offshore lifting, Lloyd’s Code for Lifting Appliances in a Marine Environment
Max. Drum Capacity: • 2,200m x 30-31mm• 2,600m x 25-26mm• 3,300m x 20-21mm