Mitglied der Helmholtz-Gemeinschaft ZEA-1 | Technology for Excellent Science SKADI - Report FZJ...
-
Upload
brittany-mills -
Category
Documents
-
view
216 -
download
1
Transcript of Mitglied der Helmholtz-Gemeinschaft ZEA-1 | Technology for Excellent Science SKADI - Report FZJ...
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
SKADI - Report FZJMeeting Lund 24.07.15
Romuald Hanslik
FZJ/ZEA-1
1
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Overview
• Coordination and Responsibilities• Preliminary Design• Product Breakdown• Components Description• Project status
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Coordination and Responsibilities by FZJ
• Cooperation Leader and project responsible – Sebastian Jaksch (JCNS)• Senior Advisor – Henrich Frielinghaus (JCNS)• Lead Engineer for Mechanics - Romuald Hanslik (ZEA-1)
– Designer - Achim Gussen (ZEA-1)• Lead Engineers for Electronics - Ralf Engels, Harald Kleines (ZEA-2)• Lead Engineers for SONDE - Ralf Engels, Günter Kemmerling (ZEA-2)
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Coordination and Responsibilities
• Cooperation Leader, Laboratory Leaders Jacques Jestin (LLB) and Sebastian Jaksch (FZJ), Laboratory Engineers from LLB, ZEA-1 and ZEA-2 and Senior Advisors meet every two weeks via videoconference, every eight weeks in person.
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
NeutronExtraction
SlimCollimation
WideCollimation
Choppers
Sample Area
DetectorTube
Detectors
Polarizer, Spin Flipper
SKADI layout
Lenses
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
SKADI dimensions
Bunker
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
SKADI Product Breakdown
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
SKADI Product Breakdown
Green box - work packages – FZJ Red box - work packages – LLB
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
SKADI Product Breakdown Each task has a separate list of requirements
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Neutron Extraction
Components Description
• Extremely radiation hard• Part of Target Monolith• Material for Neutron guide beryllium, low “m” allowed• Cooling required• Possible execution as insert made of concrete with integrated
beryllium guide• Cross section of neutron guide 30x30mm2
Challenge: Manufacturing of beryllium guide Embedding the beryllium guide in concrete Implementation of cooling systems
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Bender
Components Description
• Horizontal curved Guide from Borofloat glass (Radius ca. 80m)• Vacuum vessel• Necessary vacuum level 10-2 mbar• Close to neutron guide / space requirements• Cooling of neutron guide in vacuum / access for piping• Cross section of neutron guide 30x30mm2
Challenge: Implementation of cooling systems
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Polarizer
Components Description
• Vertical changer in vacuum vessel for four Positions:
• 1x Neutron guide 800mm length • 1x Polarizer 500mm length• 1x Polarizer 800mm length• 1x additional position
• Separate vacuum, necessary vacuum level 10-2 -10-3mbar• Control of movement: adjustment under neutron, motor cradle, xy
adjustment
Challenge: Adjustment under neutron Shielding for electronic components
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Spin Flipper
Components Description
• Positioned directly after the Polarizer but still in the bunker• Without vacuum vessel• Alignment shall only be possible off-line.• Accuracy of the alignment shall be 0.5 mm in all directions• Cooling
Challenge: Implementation of cooling systems
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Slim Collimation
Components Description
• Movable neutron guides in vacuum vessel• necessary vacuum level 10-3 -10-2mbar • Pneumatic actuator for movable neutron guides • Cross section of neutron guide 30x30mm2
• Vessel inner lined with shielding materials• Position of active blinds 20m, 14m, 8m, • Cross section for opening of active blinds 30x30mm2• Cross section for opening of passive blinds 32x32mm2• Guide field with low field gradient along the collimation
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Chopper Systems
Components Description
• Three Choppers for 14/7 Hz modes with counter rotating two disks each.
• Chopper housing necessary vacuum level 10-3 mbar • Interface to slim and wide collimation
Challenge: Guiding the magnetic field by chopper
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Sample Area
Components Description
• Cross-section 3x3m2
• Top access 2,5x2,5m2
• Sites access by motorized door• Guiding the magnetic fields with the collimation nose to the
sample position• Snails blinds on the collimation end• Possible changing the sample distance
Challenge: Design of the shielding around sample area Design of the snails blinds
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Shielding
Components Description
• The several components of the shielding along the instrument should have a standard interlocking method
• A standard shielding sandwich shall be designed• With the hall crane the single segments have to be able to be
removed without further need of assistance• Possible integration of the first chopper shield to the bunker
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Detektor Tube
Components Description
• Main tube, rail system, support and coarse alignment will be provide by LLB
• Support for Detectors and housing for electronics will be provide by FZJ
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Project status
• The instrument was broken down into separated products/components
• SKADI Product Breakdown was created• The work packages were assigned to the corresponding
laboratories• For each component a requirement list is created and
constantly updated• Currently we are working on the development of components• We are starting with the design phase beginning of September
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Project status
We need: VPN-Access for download of CATIA V6 and license CAD-Data for SKADI place in the neutron guide hall with
information for beam implementation and floor requirements CAD-Data for Bunker with information on the access, pipeline
implementation etc. Data for Place for neutron extraction in the target monolith In future: shielding calculation, CAD-Modell from chopper
housing Would be useful: Information/Requirements for Standards for
example for pipeline (witch norm, diameter, flanges etc.)
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Mitg
lied
der
Hel
mho
ltz-G
emei
nsch
aft
ZEA-1 | Technology for Excellent Science
Thank you for your attention