MISSION 2-SHELF END TABLE

Thank you for purchasing our Mission 2-Shelf End Table. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it

helpful to have a second person present in at least one step of the assembly.

7581 OHPH1081201

STEP 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. STEP 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non-abrasive surface (like the carton or carpet) to prevent damage to the finish. Identify all parts using diagram at right.

STEP 3 Identify and count hardware using diagram at right.

STEP 4 Attach Side Assembly (C) to Shelves (B) using four 1-1/4” screws inserting them through the predrilled holes in Side Assembly (C), then into the predrilled holes in Shelves (B). Do no tighten screws at this time. Repeat with other Side Assembly (C).

STEP 5 Stand unit upright and attach Top (A) using four 1-1/4” screws inserting them through the predrilled holes in the Side Assemblies (C), then into the predrilled holes in the Top cleats. Tighten all screws.

STEP 6 Insert flush plugs into the holes to cover the screws. Tap lightly with a hammer until flush.

CARE Dust as needed with a soft cloth. Clean with damp cloth and mild solution of dish soap. Polish with soft cloth and polish that contains no pigments or silicone.

www.llbean.com

Product Support 1 800 341 4341