Mirrors - sigesg.com · 1/15/2016 · INTERIOR MIRRORS 10 UNIVERSAL FIT MIRRORS 11 MIRROR HEADS 14...

MirrorsProduct Catalogue

Britax PMG LimitedBritax PMG Limited, Bessingby Industrial Estate, Bridlington, Yorkshire, England YO16 4SJt. +44 (0) 1262 670161 f. +44 (0) 1262 605666 e. [email protected]

The products detailed in this catalogue represent our current range, and whilst every effort has been made to ensure accuracy of the information supplied, customers are requested to satisfy themselves of the suitability of any products required.

Full terms & conditions available at www.britax-pmg.com CATM14

Britax is a registered trademark of and used under licence from a member of the Britax group of companies.

02 03Mirrors visit our website | www.britax-pmg.com call our sales team | 01262 670161 Mirrors

FEATURE PRODUCTS 08

TECHNICAL INFORMATION 04

INTERIOR MIRRORS 10

UNIVERSAL FIT MIRRORS 11

MIRROR HEADS 14

PANORAMIC MIRRORS 17

ARMS 19

INDEX 23

PAGE

Britax PMG Limited is a world-class supplier of mandatory and auxiliary vehicle lighting, amber hazard warning lighting and rear view mirrors to both vehicle Original Equipment Manufacturers (OEMs) and the commercial vehicle after market. Our equipment can be found on all types of vehicle, including cars, vans, trucks, trailers, tractors, buses, coaches, recovery trucks and construction machinery.

UK

CHINAUSA

FRANCE

AUSTRALIA

GERMANY

Our quality range of beacons, lightbars, lamps, reflectors, switches, and mirrors are sold all around the world through a comprehensive network of distributors.As part of the ECCO Safety Group, the company has access to manufacturing facilities in nine locations on four continents, along with an additional four international sales offices in Europe, Australia and China, together employing 900 team-members.

Britax PMG LimitedBessingby Industrial EstateBridlington, YO16 4SJt. +44 (0)1262 670161f. +44 (0)1262 605666e. [email protected]. britax-pmg.com

BRITAX is the registered trademark of, and is used under licence from, a member of the BRITAX group of companies.

TASMANIA

MirrorsProduct Catalogue

Technical InformationTechnical Information

R1800

R1200

R400

300egMirrorsappearonlyslightlycurved

Not to Scale

R=Radius (Spherical)eg R400=400mm Radius (Spherical)

Conform to EEC Directive 2003/97and ECE Regulation 46,02

1800 Radius is theleast curved Mirror

400 Radius is themost curved mirror

MIRROR INFORMATION

OLD MARKING CURRENT MARKING MIRROR HEAD VOLTAGE HEATED DESCRIPTION REPLACEMENT

GLASSGLASS RADIUS

II E11 01 * 1106 II E11 011106

7105.000 - - TO FIT Ø22 ARMS Z4002.444.05 1800

Z4002.820 - - TO FIT Ø16 ARMS Z4002.444.05 1800

Z4003.187 24V HEATED 24V HEATED TO FIT Ø16 ARMS Z4003.401.05 1800

II E11 02*1153 II E11 026330

II E11 03*6330

7106.000 - - UN-HEATED TO FIT Ø22 ARMS

SUPPLIED WITH SLEEVES TO FIT 19 AND 16 ARMS

Z4002.475.05 1800

7106.001 12V HEATED HEATED 12V Ø16/19 AND 22 CLAMPS Z4003.431.05 1800

7106.002 24V HEATED HEATED 24V 48W Ø16/19 AND 22 CLAMPS Z4002.687.05 1800

7106.003 - - UN-HEATED FLAT GLASS 7400.001.05 FLAT

7106.006 - - MIRROR ASSY UNHEATED 32DIA CLAMP Z4002.475.05 1800

7106.007 24V HEATED MIRROR ASSY 24V HEATED 32DIA CLAMP Z4002.687.05 1800

7106.009 - - UN-HEATED R1800 TO FIT 25.4MM TUBE Z4002.475.05 1800

7106.010 24V HEATED HEATED 24V 48W TO FIT 25.4MM TUBE Z4002.687.05 1800

III E11 02*5441 III E11015441

E11 III 03 * 6326E11 III 026326

E11 II III 046326

7107.001 - - UN-HEATED R1800 7418.005.05 1800

7107.002 - - UN-HEATED R1200 7412.001.05 1200

7107.500 12V HEATED 12V R1800 7418.509.05 1800

7107.501 24V HEATED 24V R1800 7418.510.05 1800

7107.502 12V HEATED 12V R1200 7412.504.05 1200

7107.503 24V HEATED 24V R1200 7412.505.05 1200

I E11 02 * 5716 I E11 015716

I E11 026329 I E11 03*6329

7108.000 - - INTERIOR MIRROR 41.4 HOLE CTRS 7412.002.10 1200

7108.001 - - INTERIOR MIRROR SLOTTED 40/50MM HOLE CTRS 7412.002.10 1200

IV V E11 011152IV V E11 02*1152II III E11 011152

II III E11 02*1152

IV V E11 026328IV V E11 03*6328II III E11 026328

II III E11 03*6328

7112.020 - - 450 RAD UN-HEATED Z4003.420.05 450

7112.030 12V HEATED 12V HEATED 450 RAD Z4003.428.05 450

7112.040 24V HEATED 24V 20W HEATED 450 RAD Z4003.424.05 450

7112.021 - - 1200 RAD HEAD Z4003.421.10 1200

7112.023 - - FLAT GLASS UNHEATED Z4003.423.10 FLAT

7112.031 12V HEATED 12V R1200 HEATED HEAD 7412.000.05 1200

7112.041 24V HEATED 24V R1200 HEATED HEAD Z4003.425.05 1200

7112.022 - - UN-HEATED R1800 Z4003.422.10 1800

7112.032 12V HEATED 12V HEATED R1800 7418.507.05 1800

7112.042 24V HEATED 24V HEATED R1800 Z4003.426.05 1800

7112.121 VOLVO - - 1200 RAD HEAD 7412.003.10 1200

III E11 02 * 1104 III E11 011104

III E11 03 * 6324 III E11 026324

7120.320 - - R1200 UN-HEATED HEAD CAP SCREWS 3004.016 INSIDE CASE Z4002.498.10 1200

7120.200 - - INTERIOR MIRROR 1200 RAD WITH STEM 5 X 10 SLOT 45 CENTRES Z4002.498.10 1200

7120.201 - - INTERIOR MIRROR 1200 RAD WITH STEM 8 X 10 SLOT 45 CENTRES Z4002.498.10 1200

7121.320 - - FLAT GLASS Z3002.068.10 FLAT

7120.301 - - 1200 RAD WITH HALF CLAMP Z4002.498.10 1200

7121.301 - - FLAT GLASS WITH HALF CLAMP AND DOME NUT Z3002.068.10 FLAT

IV E11 02*5801 IV E11 015801

V E11 02*5802 V E11 015802

IV E11 03*6401IV E11 026401

V E11 03*6401 V E11 026401

7124.320 - - 450 RAD UNIVERSAL CLAMP TO FIT 10 -22 ARMS 7404.002.05 450

NO APPROVAL MARK

NO APPROVAL MARK

7124.001 - - 450 RAD INTERIOR MIRROR 45MM SLOT CENTRES 7404.002.05 450

7124.000 - - 450 RAD INTERIOR METAL STEM BENT DOWNWARD AT 90° WITH CLAMP 7404.002.05 450

7124.003 - - 450 RAD INTERIOR METAL STEM BENT UPWARD AT 90° WITH CLAMP 7404.002.05 450

APPROVAL NUMBER ON REAR OF MIRROR CASE

To suit ‘E’ approved mirror installations.

MIRRORSThe Britax range of universal and dedicated fit heads are designed and manufactured to the highest standards and are suitable for all type of on and off highway vehicles.

With a tried and tested “breakout” mechanism, Britax mirror arms offered in this range have been fully tested to ensure compliance with the latest legislation. Also and where necessary Britax mirror heads conform to the latest relevant ECE Regulation and EEC, TUV and SAE approvals.

To suit ‘e’ approved mirror installations.

APPROVAL DETAILS

PART NUMBER

NEW ALTERNATIVE (SEE PAGE 9)

7112.020.A 7137.000

7112.030.A 7137.001

7106.020.A 7137.201

7106.001.A 7137.208

7106.002.A 7137.209

7132.001.A 7137.100

7133.001.A 7137.100

ECCO Group’s policy of continuous product improvement will result in some of the mirror parts in this catalogue being superseded. Customers are invited to consider the latest product detailed in the table below

CONVEX MIRRORSCarefully place a steel rule on the surface of the lens close to the LH edge of the mirror head. At 150mm and using a second firm edge measure the gap between the first measure and the convex surface of the lens then select from the following:

R450 glass approximately 25mm R1200 glass approximately 8mm R1800 glass approximately 5mm

PRODUCT IMPROVEMENT


Technical Information Technical Information


GLASSGLASS RADIUS

II E11 015962 II E11 02 * 5962

II E11 026402 II E11 03 * 6402

7130.000 12V - RH SIDE ENTRY REMOTE CONTROL 7300.122.A 2000

7130.001 12V - LH SIDE ENTRY REMOTE CONTROL 7300.122.A 2000

7130.004 12V HEATED TOP ENTRY REMOTE CONTROL & HEATED - 12V R2000 7300.131.A 2000

7130.005 12V HEATED LH SIDE ENTRY REMOTE CONTROL & HEATED 7300.131.A 2000

7130.006 12V HEATED RH SIDE ENTRY REMOTE CONTROL & HEATED 7300.131.A 2000

7130.012 12V - RH UN-HEATED REMOTE CONTROL - 12V R2000 7300.122.A 2000

7130.013 12V - LH UN-HEATED REMOTE CONTROL - 12V R2000 7300.122.A 2000

7130.014 12V -HIGH TEMP (HT MARK NEXT TO BRITAX

LOGO) UN-HEATED REMOTE CONTROL - 12V R2000

2000

7130.020 24V HEATED TOP AND BOTTOM ENTRY REMOTE CONTROL & HEATED 7300.177.A 2000

7130.026 24V HEATED TOP AND BOTTOM ENTRY REMOTE CONTROL & HEATED VOLVO WITH CABLE CLIPS 24V 7300.177.A 2000

II E11 02*5717 II E11 015717

II E11 03*6327 II E11 026327

7131.000 - - TO FIT Ø22 ARMS 7418.006.05 1800

7131.001 - - TO FIT Ø19 ARMS 7418.006.05 1800

7131.004 - - MIRROR ASSEMBLY (NO CLAMP) 7418.008 1800

7131.500 24V HEATED MIRROR ASSEMBLY 24V HEATED Ø22 CLAMP 7418.512.05 1800

7131.600 - - TO FIT Ø22 ARMS 7418.006

7131.601 - - TO FIT Ø19 ARMS 7418.006

II E11 02*5461 II E11 015461

II E11 03 * 6322 II E11 026322

7132.000 - - THUMBWHEEL TO FIT 22 SQUARE BAR UN-HEATED R1800 7418.006.05 1800

7132.001 - - UNIVERSAL CLAMP FITS Ø16-22TUBE UN-HEATED R1800 7418.006.05 1800

7132.201 - - UNIVERSAL CLAMP FITS Ø16-22 TUBE UN-HEATED R1200 7412.005.05 1200

7132.030 - - UNIVERSAL CLAMP FITS Ø16-22 TUBE FLAT GLASS 7400.003.05 FLAT

7132.500 12V - REMOTE 12V UN-HEATED R1800 WITH LOCATION PLUG 7418.006.05 1800

7132.501 24V - REMOTE 24V UN-HEATED R1800 WITH LOCATION PLUG 7418.006.05 1800

7132.506 12V HEATED HEATED 12V R1800 FLY LEAD -NO LOCATION PLUG 7418.511.05 1800

7132.507 24V HEATED HEATED 24V R1800 FLY LEAD -NO LOCATION PLUG 7418.512.05 1800

7132.508 12V - REMOTE ACTUATOR 12V UN-HEATED R1800 FLY LEAD -NO PLUG 7418.006.05 1800

7132.509 24V - REMOTE ACTUATOR 24V UN-HEATED R1800 FLY LEAD -NO PLUG 7418.006.05 1800

7132.510 12V HEATED REMOTE 12V HEATED R1800 7418.511.05 1800

7132.511 24V HEATED REMOTE 24V HEATED R1800 7418.512.05 1800

7132.520 24V HEATED HEATED 24V R1800 ARMOURED CABLE AND DEUTSCH PLUG 7418.512.05 1800

7132.528 12V HEATED HEATED 12V R1800 ARMOURED CABLE AND DEUTSCH PLUG 7418.511.05 1800

7132.801 12V - REMOTE ACTUATOR 12V UN-HEATED R1200 7412.005.05 1200

7133.000 - - THUMBWHEEL TO FIT 22 SQUARE TUBE - UN-HEATED R1800 7418.006.05 1800

7133.001 - - UNIVERSAL CLAMP FITS Ø16-22TUBE UN-HEATED R1800 7418.006.05 1800

NO APPROVAL MARK

7018.016 - - RH ASSY 7132.001 HEAD + 7218.006 ARM 1800

7018.017 - - LH ASSY 7132.001 HEAD + 7218.007 ARM 1800


GLASSGLASS RADIUS

BOTH APPROVALS ON

REAR COVER

II III E11 028022II III E11 03*8022

IV E11 028025IV E11 03*8025

7135.011

12V - MOTORISED MAIN MIRROR CLASS II / III LARGE UN-HEATED R1800 7300.202.A 1800

- - MANUAL SMALL MIRROR CLASS IV UN- HEATED R300 7300.203.A 300

7135.012

12V HEATED MOTORISED + HEATED MAIN MIRROR CLAS II / III 7300.190.A 1800

12V HEATED MANUAL + HEATED SMALL MIRROR CLASS IV 12V HEATED R300 7300.191.A 300

7135.013 CNH LH EUROPE



7135.014 CNH RH EUROPE



7135.016

- - MANUAL MAIN MIRROR CLASS II / III LARGE UN-HEATED R1800 7300.202.A 1800


7135.023 CNH U.S.

12V - MOTORISED MAIN MIRROR CLASS II / III LARGE UN-HEATED R1800 7300.202.A 1800


7135.024 CNH RH EUROPE



7135.025 CNH LH EUROPE



II III E11 02 * 1113II III E11 011113

II III E11 03 * 6325

II III E11 026325

7182.201 - - UN-HEATED R1200 WITH 7601.001 MIRROR HEAD END COLLAR Z4002.496.10 1200

7181.301 - - HALF CLAMP AND DOME NUT FLAT GLASS Z4002.453.10 FLAT

7182.301 - - HALF CLAMP AND DOME NUT R1200 GLASS Z4002.496.10 1200

7180.320 - - CAP SCREWS UN-HEATED R1800 MARKED 3004.001 INSIDE CASE Z4002.488.10 1800

7181.320 - - CAP SCREWS UN-HEATED FLAT MARKED 3004.022 INSIDE CASE Z4002.453.10 FLAT

7182.320 - - CAP SCREWS UN-HEATED R1200 MARKED 3004.000 INSIDE CASE Z4002.496.10 1200

7020.000 R.H - - EXTENDABLE MIRROR ASSY WITH 7182.201 HEAD 1200

7020.001 L.H. - - EXTENDABLE MIRROR ASSY WITH 7182.201 HEAD 1200

NO APPROVAL MARK

7802.000 - - SELF ADHESIVE BLIND SPOT PANORAMIC - 200

7803.000 - - OVER DOOR STAINLESS STEEL RECTANGULAR 103 X 210 - 300

7803.001 - - BLIND SPOT CIRCULAR DIAMETER 160 - 300

7840.002 - - BLIND SPOT CIRCULAR DIAMETER 268 - 400

II E11 011157E2 III 01*463

E2 III 00463

7812.161 - - 4003.189 MIRROR HEAD + ARM ASSY 210 X140 Z4003.412.10 1200

4003.189 - - HEAD ONLY UN-HEATED 1800 RAD NOT AVAILABLE FOR SALE, USE ABOVE 7812.161 Z4003.412.10 1200

II E11 011157II E11 02*1157III E11 011158

III E11 02*1158

7812.163 - - 4003.191 MIRROR HEAD + ARM ASSY 270 X165 Z4003.430.10 1800

4003.191 - - HEAD ONLY UN-HEATED 1800 RAD NOT AVAILABLE FOR SALE, USE ABOVE 7812.163 Z4003.430.10 1800

7720.004 - - OPTIONAL REMOTE CONTROL SWITCH FOR 7132 SERIES

APPROVAL NUMBER ON REAR OF MIRROR CASE continued


Feature Products Feature Products

7137.000 CLASS IV & V MIRROR HEAD GLASS RADIUS R450MM

7137.001 12 VOLT HEATED

7137.100 CLASS II MIRROR HEAD GLASS RADIUS R1200MM



7137.200 CLASS II MIRROR HEAD GLASS RADIUS R1200MM


7137.203 24 VOLT HEATED• Mirror glass can be adjusted up–down 20˚

left right 20˚

• 12 v heated versions can be specified.

• To fit Ø25mm arms. Supplied with adapter sleeves to fit Ø16, Ø19mm and Ø22mm arms.

• E’ approved UN ECE Regulation 46 E11 048481

• Unique patented ECCO mounting bracket – single bolt locking.

• Suitable for a wide range of Off Highway vehicle applications.

7265.001 MANUAL ADJUSTMENT L.H.

7265.002 MANUAL ADJUSTMENT R.H.

7265.501 WITH CABLE FOR REMOTE ADJUSTABLE / HEATED HEADS L.H.

7265.502 WITH CABLE FOR REMOTE ADJUSTABLE / HEATED HEADS R.H.• Fully extended position – 860mm

• Arm detent angle every 10˚

• Ø22mm mounting arm.

• Suitable for a wide range of Off Highway vehicle applications.

• As fitted to New Holland tractors.

• For use with ECCO 7137 Series heads.

• Colour cover options available subject to minimum order quantities. Call ESG Europe on +44(0)1262 670161

A

264

VIS

IBLE

GLA

SS

AR

EA

163VISIBLE GLASS AREAR35

4 PLC'S

CLAMP ASSEMBLYTORQUE 7Nm

98

LATERAL TORQUE 8-12Nm

CLAMP TO SUIT MOUNTING TO EITHER:Ø25 (NO ADAPTOR REQUIRED)•Ø22 (USE ITEM 5) (AS SUPPLIED)•Ø19 (USE ITEM 14) (SUPPLIED LOOSE)•Ø16 (USE ITEM 15) (SUPPLIED LOOSE) •

185

283

A

A

1567910111213

16

8

4

3

2

14

DETAIL ASCALE 2 : 3

15

PRODUCT TEST SPEC. FOR DETAILED INFORMATION REFER TO ENS132

N-S ROTATION ±20°WHOLE MIRROR

E-W ROTATION ±20°WHOLE MIRROR

CERTIFICATION PROCEDURE INVOLVED - UNAUTHORISED DEVIATION STRICTLY

FORBIDDENMOD No. REFERENCE ISS DATE BY

43391 PRE PROD REL 01 15/01/2016 DESIGN

43596 PRE PROD REL 02 13/05/2016 design

EA160629JW1 PRODUCTION REL A 05/07/2016 JMW

ITEM No. P/N DESCRIPTION QTY MATERIAL1 V7601.163 TOP CLAMP 1 PA6 15% GF2 V060251114 M6 SOCKET HEAD SCREW 1 STEEL3 V060006230 M6 WASHER BLACK 1 STEEL4 V7801.010 M6 INSERT 1 BRASS5 V7600.043 Ø22 CLAMP ADAPTOR 2 PA666 V7603.126 UPPER CLAMP 1 PP 30% GF7 V7601.162 BOTTOM CLAMP PIVOT 1 PA6 15% GF8 V7550.006 SPRING 1 AISI C 1080 STEEL9 V7601.164 BALL TENSIONER 1 PA6 30% GF

10 V7603.127 MIRROR CASE 1 PP 15% GF11 V16482.00 SCREW Ø5.2 3 STEEL12 V7412.609 MIRROR GLASS 1 FLOAT GLASS / PP16913 V7600.042 BEZEL 1 PVC14 V7600.044 Ø19 CLAMP ADAPTOR 2 PA6615 V7600.045 Ø16 CLAMP ADAPTOR 2 PA6616 V7609.000 ADHESIVE PAD 2 TWIN STICK WHT

TEST SPEC SECTION TEST TYPE DESCRIPTIONENS 132 5.1 IN-ORGANIC DUST EXPOSURE 24 HOURS EXPOSURE TO PORTLAND CEMENT EN-197 TYPE 1ENS 132 5.2 PARTICLE IMPACT 12 CYCLES / 10 SECOND CYCLE Ø 0.96 - 1.6CM GRAVELENS 132 5.3 SALT ENVIRONMENT 72 HOURS AT 35°C / ASTM B117 (Ph 6.5 TO 7.2)ENS 132 5.4 CLEANING 5 MINUTES AT 35,000 kPaG, MULTI PURPOSE CLEANERENS 132 5.5.3 RESONANCE SEARCH 40m/s², 15Hz TO 2000Hz, 5 MINUTES AT EACH RESONANCEENS 132 5.5.4 SHOCK TESTING 400m/s², 3600 PULSES, 6ms 1/2 SINEENS 132 5.5.5 RANDOM VIBRATION 10-800Hz, PSD LEVELS .005 TO 120g²/Hz

ENS 132 5.6 BENCH HANDLING SHOCK 6 DROPS FROM 450mm, ALL FACESENS 132 5.7 STORAGE TEMPERATURE -55°C TO +85°C - 24 HOURS EACHENS 132 5.8 STORAGE HUMIDITY 95%RH, +40°C, 168 HOURSENS 132 5.9 THERMAL SHOCK -40°C TO +85°C - 20 CYCLES, 1 MINUTE TRANSFER

A

B

C

D

E

F

1 2 3 4 5

PART No.

1A

of

ShtNo

IF IN DOUBT - ASK

CHECKED

DIMENSIONS IN MILLIMETRES

DRAWN IN ACCORDANCE WITH BS308

EAST YORKSHIRE

BRITAX (PMG) LTDBESSINGBY INDUSTRIAL ESTATEBRIDLINGTON

TITLE

DRAWN

YO16 4SJ

DATE

C

DO NOT SCALE

3RD ANGLE PROJECTION

DIMENSIONAL TOLERANCES :

SCALE

METRICDESIGN

SPEC

SPEC

TOOL No.

ESTIMATED MASS

MATERIAL

FINISH

6 7 8 9

7137.000

A.SHARP 15/01/2016 1:3

1

/CHANGE NOTESEE RELEASE

NOTED

Designed with

NOTED

NOTEDNOTED

MIRROR HEAD ASSEMBLY

NOTE:

MIRROR TO CONFORM TO 1. UNECE REG 46 (E11 048481)

1

2

2

2

218VISIBLE GLASS AREA

379

VIS

IBLE

GLA

SS

AR

EA

R452 PLC'S

R252 PLC'S


2

2

A

98

LATERAL TORQUE14-18Nm

CLAMP TO SUIT MOUNTING TO EITHER:Ø25 (NO ADAPTOR REQUIRED)•Ø22 (USE ITEM 5) (AS SUPPLIED)•Ø19 (USE ITEM 14) (SUPPLIED LOOSE) •

239

399

A1

7

2

3

4

568

9

10

11

12

13

16

15

14

DETAIL ASCALE 2 : 3






43391 PRE PROD REL 01 15/01/2016 DESIGN

43568 PRE PROD REL 02 29/04/2016 jackiew


ITEM No. P/N DESCRIPTION QTY MATERIAL1 V7601.163 TOP CLAMP 1 PA6 15% GF2 V060251114 M6 SOCKET HEAD SCREW 1 STEEL3 V060006230 M6 WASHER 1 STEEL4 V7801.010 M6 INSERT 1 BRASS5 V7600.043 Ø22 CLAMP ADAPTOR 2 PA666 V7603.126 UPPER CLAMP 1 PP 30% GF7 V7601.162 BOTTOM CLAMP PIVOT 1 PA6 15% GF8 V7550.006 SPRING 1 AISI C 1080 STEEL9 V7601.164 BALL TENSIONER 1 PA6 30% GF

10 V7603.127 MIRROR CASE 1 PP 15% GF11 V16482.00 SCREW Ø5.2 3 STEEL12 V7412.609 MIRROR GLASS 1 FLOAT GLASS / PP16913 V7600.042 BEZEL 1 PVC14 V7600.044 Ø19 CLAMP ADAPTOR 2 PA6615 V080006030 WASHER 1 STEEL16 V7609.000 ADHESIVE PAD 2 TWIN STICK WHT



A

B

C

D

E

F

1 2 3 4 5

PART No.

1A

of

ShtNo

IF IN DOUBT - ASK

CHECKED



EAST YORKSHIRE


TITLE

DRAWN

YO16 4SJ

DATE

C

DO NOT SCALE



SCALE

METRICDESIGN

SPEC

SPEC

TOOL No.

ESTIMATED MASS

MATERIAL

FINISH

6 7 8 9

7137.200

A.BORAZJANI 05/06/2015 1:3

1


NOTED

Designed with

NOTED

NOTEDNOTED


NOTE:


1


314

VIS

IBLE

GLA

SS

AR

EA

R452 PLC'S

R452 PLC'S

ACLAMP ASSEMBLYTORQUE 7Nm

98

LATERAL TORQUE14-18Nm

CLAMP TO SUIT MOUNTING TO EITHER:Ø25 (NO ADAPTOR REQUIRED)•Ø22 (USE ITEM 5) (AS SUPPLIED)•Ø19 (USE ITEM 14) (SUPPLIED LOOSE) •Ø16 (USE ITEM 16) (SUPPLIED LOOSE) •

263

334

A

16

DETAIL ASCALE 2 : 3

A

1

578910

15

1213 11

3

2

4 6

17

14









ITEM No. P/N DESCRIPTION QTY MATERIAL1 V7601.163 TOP CLAMP 1 PA6 15% GF2 V060251114 M6 SOCKET HEAD SCREW 1 STEEL3 V060006230 M6 WASHER BLACK 1 STEEL4 V7801.010 M6 INSERT 1 BRASS5 V7600.043 Ø22 CLAMP ADAPTOR 2 PA666 V7603.126 UPPER CLAMP 1 PP 30% GF7 V7601.162 BOTTOM CLAMP PIVOT 1 PA6 15% GF8 V7550.006 SPRING 1 AISI C 1080 STEEL9 V7601.164 BALL TENSIONER 1 PA6 30% GF

10 V7603.128 MIRROR CASE 1 PP 15% GF11 V16482.00 SCREW Ø5.2 3 STEEL12 V7404.610 MIRROR GLASS 1 VARIOUS13 V7600.041 BEZEL 1 PVC14 V7600.044 Ø19 CLAMP ADAPTOR 2 PA6615 V7609.000 ADHESIVE PAD 2 TWIN STICK WHT16 V7600.045 Ø16 CLAMP ADAPTOR 2 PA6617 V080006030 WASHER 1 STEEL



A

B

C

D

E

F

1 2 3 4 5

PART No.

1A

of

ShtNo

IF IN DOUBT - ASK

CHECKED



EAST YORKSHIRE


TITLE

DRAWN

YO16 4SJ

DATE

C

DO NOT SCALE



SCALE

METRICDESIGN

SPEC

SPEC

TOOL No.

ESTIMATED MASS

MATERIAL

FINISH

6 7 8 9

7137.100

A.SHARP 04/05/2016 1:3

1


NOTED

Designed with

NOTED

NOTEDNOTED


NOTE:


1

7135 SERIES HEAVY DUTY DUAL FUNCTION SPLIT MIRROR HEADS

7135.050 MANUAL SPLIT MIRROR HEAD NON-HEATED

7135.053 MANUAL SPLIT MIRROR HEAD 12V HEATED TOP & BOTTOM LENS.

• Main mirror glass radius R1200mm

• Small mirror glass radius R300mm

• Main mirror glass can be adjusted independently up–down 20˚ left right 20˚

• Small mirror glass can be adjusted independently left-right only 11˚

• 12v & 24v heated versions can be specified.

• To fit Ø25mm arms. Supplied with adapter sleeves to fit Ø16, Ø19mm & Ø22mm arms

• ‘E’ approved UN ECE Regulation 46 E11 04700

• As fitted to Case & New Holland tractors.

• Unique patented ECCO mounting bracket – single bolt locking.

• Suitable for use with ECCO 7265 series arms.

• Main mirror glass radius R1200mm.• Small mirror glass radius R300mm.• Main mirror glass can be adjusted independently up-down 13˚ left –right 13˚• Small mirror head can be adjusted independently up-down 10˚ left –right 10˚• 12 volt heated versions can be specified.• To fit Ø22mm arms. • ‘E’ Approved main mirror Class II + Class III E11 028022 e11 03*8022 small mirror Class

IV E11 028025 e11 03*8025• As fitted to Case, New Holland, Agco & JCB tractors.• Be-spoke options available call ESG Europe on +44(0)1262 670161

R402 PLC'S

50


285

VIS

IBLE

GLA

SS

AR

EA

R302 P

LC'S

22

20.8°

95

50

177

MAIN MIRRORGLASS RADII

R1200 MINIMUM

SMALL MIRRORGLASS RADII

R250 NOMINAL

RADII CENTRE

RADII CENTRE


441

231

2

2

2

2

2

2

1

2

3

45

6

7

8

9

10

11

12

13

15

14

16

17

18

19

20


E-W ROTATION ±11°BOTTOM MIRROR ONLY


ROTATIONALTORQUE14-18Nm

LATERAL TORQUE14-18Nm NOTES:

CNH P/N 479256621.

MIRROR TO CONFORM TO2.UNECE REG 46 (E11 047000)




43291 PRE PROD REL 01 02/11/2015 daves


ITEM No. P/N DESCRIPTION QTY MATERIAL1 V7603.138 MIRROR CASE UPPER 1 PP 15% GF2 V7603.139 MIRROR CASE LOWER 1 PP 15% GF3 V7601.162 BOTTOM CLAMP PIVOT 1 PA6 15% GF4 V7550.006 SPRING 1 AISI C 1080 STEEL5 V7601.164 BALL TENSIONER 1 PA6 30% GF6 V7603.126 UPPER CLAMP 1 PP 30% GF7 V7600.043 Ø22 CLAMP ADAPTOR 2 PP8 V7601.163 TOP CLAMP 1 PA6 15% GF9 V060251114 M6 SKT HEAD SCREW 1 STEEL

10 V060006330 M6 WASHER 1 STEEL11 V16187 No.10 SELF TAP POZI 3 STEEL12 V7412.016 R1500 MIRROR GLASS 1 FLOAT GLASS / PP16913 V7403.004 R250 MIRROR GLASS 1 FLOAT GLASS / PP16914 V7602.008 SUPPORT PADS 4 PVC15 V7609.006 VHB PADS 4 ACRYLIC TAPE16 V7510.029 M5 PAN POZI DRIVE 1 STEEL17 V050006219 M5 WASHER 1 STEEL18 V7603.140 CORNER PIECE - LH 1 PP 15% GF19 V16342.00 No.6 SCREW 2 STEEL20 V7603.142 CORNER PIECE - RH 1 PP 15% GFH6



A

B

C

D

E

F

1 2 3 4 5

PART No.

1A

of

ShtNo

IF IN DOUBT - ASK

CHECKED



EAST YORKSHIRE


TITLE

DRAWN

YO16 4SJ

DATE

C

DO NOT SCALE



SCALE

METRICDESIGN

SPEC

SPEC

TOOL No.

ESTIMATED MASS

MATERIAL

FINISH

6 7 8 9

7135.050

D.STEWART 19/10/2015 1:5

1

1


NOTED

Designed with

NOTED

NOTEDNOTED

MANUAL SPLIT MIRROR

R402 PLC'S

50


285

VIS

IBLE

GLA

SS

AR

EA

R302 P

LC'S

22

20.8°

95

50

177

MAIN MIRRORGLASS RADII

R1200 MINIMUM

SMALL MIRRORGLASS RADII

R250 NOMINAL

RADII CENTRE

RADII CENTRE


441

231

2

2

2

2

2

2

1

2

3

45

6

7

8

9

10

11

12

13

15

14

16

17

18

19

20


E-W ROTATION ±11°BOTTOM MIRROR ONLY


ROTATIONALTORQUE14-18Nm

LATERAL TORQUE14-18Nm NOTES:

CNH P/N 479256621.

MIRROR TO CONFORM TO2.UNECE REG 46 (E11 047000)






ITEM No. P/N DESCRIPTION QTY MATERIAL1 V7603.138 MIRROR CASE UPPER 1 PP 15% GF2 V7603.139 MIRROR CASE LOWER 1 PP 15% GF3 V7601.162 BOTTOM CLAMP PIVOT 1 PA6 15% GF4 V7550.006 SPRING 1 AISI C 1080 STEEL5 V7601.164 BALL TENSIONER 1 PA6 30% GF6 V7603.126 UPPER CLAMP 1 PP 30% GF7 V7600.043 Ø22 CLAMP ADAPTOR 2 PP8 V7601.163 TOP CLAMP 1 PA6 15% GF9 V060251114 M6 SKT HEAD SCREW 1 STEEL

10 V060006330 M6 WASHER 1 STEEL11 V16187 No.10 SELF TAP POZI 3 STEEL12 V7412.016 R1500 MIRROR GLASS 1 FLOAT GLASS / PP16913 V7403.004 R250 MIRROR GLASS 1 FLOAT GLASS / PP16914 V7602.008 SUPPORT PADS 4 PVC15 V7609.006 VHB PADS 4 ACRYLIC TAPE16 V7510.029 M5 PAN POZI DRIVE 1 STEEL17 V050006219 M5 WASHER 1 STEEL18 V7603.140 CORNER PIECE - LH 1 PP 15% GF19 V16342.00 No.6 SCREW 2 STEEL20 V7603.142 CORNER PIECE - RH 1 PP 15% GFH6



A

B

C

D

E

F

1 2 3 4 5

PART No.

1A

of

ShtNo

IF IN DOUBT - ASK

CHECKED



EAST YORKSHIRE


TITLE

DRAWN

YO16 4SJ

DATE

C

DO NOT SCALE



SCALE

METRICDESIGN

SPEC

SPEC

TOOL No.

ESTIMATED MASS

MATERIAL

FINISH

6 7 8 9

7135.050

D.STEWART 19/10/2015 1:5

1

1


NOTED

Designed with

NOTED

NOTEDNOTED

MANUAL SPLIT MIRROR

PART NO MAIN MIRROR HEATED SMALL MIRROR HEATED MOUNTING

7135.011.E REMOTE 12V NO MANUAL NO ‘D’ ARM

7135.012.A REMOTE 12V YES MANUAL YES DROP ARM

7135.013.A REMOTE 12V YES MANUAL YES L.H.

7135.014.A REMOTE 12V YES MANUAL YES R.H.

7135.018.E REMOTE 12V YES MANUAL YES DROP ARM

7135.023.A REMOTE 12V NO MANUAL NO DROP ARM

7135.024.E MANUAL NO MANUAL NO R.H.

7135.025.E MANUAL NO MANUAL NO L.H.

7135.027.E REMOTE 12V NO MANUAL NO DROP ARM

7720.004 ‘JOYSTICK’ CONTROL SWITCH FOR MIRROR GLASS ADJUSTMENT.

PART NO GLASS POS HEATED PACK QTY

7300.190.A TOP YES SINGLE

7300.191.A BOTTOM YES SINGLE

7300.202.A TOP NO SINGLE

7300.203.A BOTTOM NO SINGLE

VISIBLE GLASS SIZE 305X215MM

VISIBLE GLASS SIZE 181X107MM

Britax PMG Limited

supply over 3/4 million mirror

parts to original equipment

manufactures per year.

22

456.5 ±3

R40

±3

32.

5° ±

1°

10°

10°

581.4 ±3FULLY CLOSED POSITION

860.6 ±3FULLY EXTENDED POSITION

ARM DETENT ANGLE - EVERY 10°

ARM SHOWN IN NOMINALSUPPLIED POSITION

50 ±0.3

10.4 + 0.30

2 PLC'S

14.5° ±1°

16.5 ±0.5

12.

9 + 0.

20

1

2

34

5

6

7

8

9

10

11

12

13

15

14

32.

5°

83.5°MECHANICAL

STOP

147.5°MECHANICAL

STOP

NOTES

CNH P/N 479256511.




ITEM No. P/N DESCRIPTION QTY MATERIAL1 V7560.116 LOWER BRACKET ASSY 1 LM6 (AlSi12) / Steel2 V7603.124 CABLE GUIDE 1 PP 10% GF3 V7560.129 MOUNTING BRACKET 1 LM6 (AlSi12)4 V7560.117 UPPER BRACKET 1 LM6 (AlSi12)5 V7601.157 FRONT COLLET 1 PA6/6 20% GB6 V7601.158 THUMBWHEEL 1 PA6/6 20% GB7 V7522.047 MIRROR TUBE 1 ERW1 TO BS63238 V7601.159 TUBE GUIDE 2 PA6/6 15% GF9 V060251114 M6 X 25 CAP SCREW 2 STEEL

10 V16480.00 No.6 PAN HEAD POZI 1 STEEL11 V7603.125 COVER 1 PP12 V16342.00 No.6 PAN HEAD POZI 2 STEEL13 V7550.005 SPRING 1 CARBON STEEL14 V12297.00 END CAP 1 LDPE15 V23011 GREASE AR FUCHS RENOLIT EP1



A

B

C

D

E

F

1 2 3 4 5

PART No.

1A

of

ShtNo

IF IN DOUBT - ASK

CHECKED



EAST YORKSHIRE


TITLE

DRAWN

YO16 4SJ

DATE

C

DO NOT SCALE



SCALE

METRICDESIGN

SPEC

SPEC

TOOL No.

ESTIMATED MASS

MATERIAL

FINISH

6 7 8 9

7265.001

D.STEWART 26/10/2015 1:3

1

1


NOTED

Designed with

NOTED

NOTEDNOTED

EXTENDABLE ARM - LH

22

456.5 ±3

R40

±3

32.

5° ±

1°

10°

10°





50 ±0.3

10.4 + 0.30

2 PLC'S

14.5° ±1°

16.5 ±0.5

12.

9 + 0.

20

1

2

34

5

6

7

8

9

10

11

12

13

15

14

32.

5°

83.5°MECHANICAL

STOP

147.5°MECHANICAL

STOP

NOTES

CNH P/N 479256511.








A

B

C

D

E

F

1 2 3 4 5

PART No.

1A

of

ShtNo

IF IN DOUBT - ASK

CHECKED



EAST YORKSHIRE


TITLE

DRAWN

YO16 4SJ

DATE

C

DO NOT SCALE



SCALE

METRICDESIGN

SPEC

SPEC

TOOL No.

ESTIMATED MASS

MATERIAL

FINISH

6 7 8 9

7265.001

D.STEWART 26/10/2015 1:3

1

1


NOTED

Designed with

NOTED

NOTEDNOTED

EXTENDABLE ARM - LH

22

456.5 ±3

R40

±3

32.

5° ±

1°

10°

10°





50 ±0.3

10.4 + 0.30

2 PLC'S

14.5° ±1°

16.5 ±0.5

12.

9 + 0.

20

1

2

34

5

6

7

8

9

10

11

12

13

15

14

32.

5°

83.5°MECHANICAL

STOP

147.5°MECHANICAL

STOP

NOTES

CNH P/N 479256511.








A

B

C

D

E

F

1 2 3 4 5

PART No.

1A

of

ShtNo

IF IN DOUBT - ASK

CHECKED



EAST YORKSHIRE


TITLE

DRAWN

YO16 4SJ

DATE

C

DO NOT SCALE



SCALE

METRICDESIGN

SPEC

SPEC

TOOL No.

ESTIMATED MASS

MATERIAL

FINISH

6 7 8 9

7265.001

D.STEWART 26/10/2015 1:3

1

1


NOTED

Designed with

NOTED

NOTEDNOTED

EXTENDABLE ARM - LH

SPARE PARTS

7720.004 OPTIONAL REMOTE CONTROL SWITCH


Interior Mirrors Universal Fit Mirrors

7182.320.A UNIVERSAL FIT MIRRORRear view mirror.

Glass spherical radius R2100mm.

To fit arms Ø10 - Ø22mm

7182.320.A

Spare Parts Z4002.496.10 Glass (10 Pack)

Glass is only available in the pack quantity stated.

No. marked inside case: 3004.000

7180.320 UNIVERSAL FIT MIRRORRear view mirror.


To fit arms Ø10 - Ø22mm

7180.320.A



No. marked inside case: 3004.001

7120.320.A 7121.320.A UNIVERSAL FIT MIRROR7120.320.A Rear View Mirror. Glass spherical radius R1400mm. To fit arms Ø10 - Ø22mm Spare Parts Z4002.498.10 Spare Glass (10 Pack)

7121.320.A Rear view mirror. Flat glass. To fit arms Ø10 - Ø22mm Spare Parts Z3002.068.10 Spare Glass (10 Pack)

Glass in only available in pack quantity stated.

7120.320: No. marked inside case: 3004.018

7120.200.A INTERIOR MIRRORInterior Mirror. Assembly. Rear View.

Glass spherical radius 1400mm.

7120.200.A

To fit JCB

Spare Parts Z4002.498.10 Spare Glass (10 Pack)


75

65

195

VISIBLE GLASS 173 x 121

143

36

100

45

A

5mm WIDEA = 45mm

GLASS SIZE184 x 1331400 Radius

7124.001.A INTERIOR MIRRORInterior Mirror Assembly Rear View.

Glass spherical radius: R450mm.

7124.001.A 7124.320 Rear view mirror. Glass spherical radius R450 to fit arms Ø12.5 - Ø22mm

Spare Parts 7404.002.05 Spare Glass (5 Pack)


75

65

195

VISIBLE GLASS 173 x 121

143

36

100

45

A

5mm WIDEA = 45mm



For advice and assistance with

specification, please call our

Mirror Engineering Team on

+44 (0) 1262 670161

7020.000. RH. 7020.001. LH ARM and HEAD ASSEMBLIESRear view extendable mirror assembly.

Glass spherical radius R1200.

7020.000.RH. 7020.001.LH

To fit CNH Tractors.

Spare Parts 7182.201 Head Only. 24002.496.10 Glass (10 Pack). 7604.001 Thumbwheel Adjuster.

Glass in only available in the pack quantity stated.

152

270GLASS SIZE252 x 1511200 Radius

Visible Area240 x 142

172

231 RH SHOWN

10deg

Ø16

2 x M6HOLES

110

60

291

Universal Fit Mirrors Universal Fit Mirrors

7106.000.A UNIVERSAL FIT MIRRORRear view mirror. Glass spherical radius R1800mm. To fit Ø22mm arms. Supplied with adapter sleeves to fit Ø16mm and Ø19mm arms.

7106.000.A

Heated versions: 7106.001.A 12v 7106.002.A 24v

Spare Parts Z4002.475.05 Glass (5 Pack) Z4003.431.05 12v Glass (5 Pack) Z4002.687.05 24v Glass (5 Pack)


7812.161 ARM & HEAD ASSEMBLYRear view mirror arm and head. Glass spherical radius R1200

7812.161

To fit Land Rover Defender



7812.163.A oversize head visible glass size 145x248mm

7107.001.A UNIVERSAL FIT MIRRORRear view mirror.


To fit arms Ø16mm - Ø22mm

7107.001.A

Heated version available: 7107.500.A 12 volt. 7107.501.A 24 volt.

Spare Parts 7418.005.05 Glass (5 Pack) 7418.509.05 12v glass (5 pack) 7418.510.05 24v glass (5 pack)


24mm to one side

185 Visible

269

253 x 1941800 Radius

GLASS SIZE

245Visible

ADJfrom

100

±8degVERTICAL

OFFSET

209

7112.020.A UNIVERSAL FIT MIRRORRear view mirror. Glass spherical radius R450. To fit arms Ø10 - Ø22mm

7112.020.A

Heated versions available: 7112.030.A 12 volt. 7112.040-A 24 volt.



174

282

255Visible

116

99 147 Visible


7112.021.A UNIVERSAL FIT MIRRORRear view mirror. Glass spherical radius R1200mm. To fit arms Ø10 - Ø22mm

7112.021.A

Heated versions available: 7112.031.A 12 volt. 7112.041.A 24 volt.

To fit Volvo construction machines (VCE)

Spare Parts Z4003.421.10 Glass (10 Pack) 7412.000.05 12v glass (5 pack) Z4003.425.05 24v glass (5 pack)


174

282

255Visible

116

99 147 Visible



Other heated/remote control

options may be available, subject to

minimum order quantities.

Please contact Britax

for details.

7132.001.A HEADSREAR VIEW MIRROR.

Glass spherical radius R1800. To fit Ø16mm - Ø22mm.

7132.001.A

To fit AGCO Group tractors.

Spare Parts 7418.006.05 Glass (Pack Of 5). 7900.005 Corner Gasket Fixing Kit. (4x corners, 4x screws, 1x bezel)


238215 Visible

328

315 x 225GLASS SIZE

1800 Radius

304Visible

103120

Mirror Heads Mirror Heads

7130.002.A HEADSRear view mirror. Remote control only. Top mounted. Un-heated


To fit arms Ø16mm - Ø22mm.

7130.002.A

To fit CNH tractors.

Glass/carrier is single pack.

Spare Parts 7300.122.A Glass/Carrier Assembly

7130.000.A RH 7130.001.A LH HEADSRear view mirror. Remote control. Un-heated

7130.000.A side mounted RH.

7130.001.A side mounted LH.



7130.000.A Right Hand. 7130.001.A Left Hand.


Glass/carrier is single pack.

Spare Parts 7300.122.A Glass/Carrier Assembly.

7130.004.A HEADSRear view mirror. Remote control & heated glass. Top mounted.



7130.004.A

7130.020 24v top entry mount.


Glass/carrier in single pack.

Spare Parts 7300.131.A Glass/Carrier Assembly With 12V Heater Element. 7300.177.A Glass/Carrier Assembly With 24V Heater Element.

7131.000.A 7131.001.A HEADSRear view mirror. Glass spherical radius R1800. To fit Ø22mm - 7131.000.A. To fit Ø19mm - 7131.001.A.

7131.000.A 7131.001.A

To fit AGCO Group tractors.

Spare Parts 7418.006.05 Glass (Pack Of 5)


217 Visible


240

306Visible

330

90

75

7182.201.A HEADSRear view mirror with Thumbwheel Adjuster.


For use on 7020.000 R.H and 7020.001.L.H assemblies.

7182.201.A


Spare Parts Z4002.496.10 Glass (Pack Of 10). 7604.001 Thumbwheel Adjuster



7802.000 PANORAMIC MIRRORBlind spot mirror.

Spherical radius R200.

Self adhesive.

7802.000

103

140

15

SELF ADHESIVE PADS

200 Sp

herical Rad

ius

7803.001 PANORAMIC MIRRORBlind spot circular mirror.


Black housing.

7803.001

160 82

Ø10

300 Spherical Radius

Mirror Heads Panoramic Mirrors

7132.500.A. 7132.501.A HEADSREAR VIEW MIRROR.

7132.500.A 12 volt Remote Control. 7132.501 . A 24 volt Remote Control.

To fit Ø16mm - Ø22mm arms.

7132.500.A. 7132.501.A


Spare Parts 7418.006.05 Glass 12v (Pack Of 5). 7900.005 Corner Gusset Fixing Kit. 7720.004 Optional Remote Control Switch.


238215 Visible

328

315 x 225GLASS SIZE

1800 Radius

304Visible

103120


Glass spherical radius R1800. To fit Ø22mm

7133.001.A


Spare Parts 7418.006.05 Glass (Pack Of 5). 7900.005 Corner Gusset Fixing Kit. (4x corners, 4x screws, 1x bezel)



Glass spherical radius R1800. To fit 22mm tube Thumbwheel fixing.

7133.000.A


Spare Parts 7418.006.05 Glass (Pack Of 5). 7300.035 Thumbwheel. 7900.005 Corner Gasket Fixing Kit. (4x corners, 4x screws, 1x bezel)



Z4007-313 ARMSBlack. ‘Midibrac’ arm assembly

ø16mm tube.

Spring loaded adjustment.

2 X M6 mounting holes.

Z4007.313

Adjustment can be done only when the arm is securely mounted.

189

100

85deg

2 x M6

60

HOLES

328

Ø16

Z4007.456 ARMSBlack. ‘Midibrac’ arm assembly

ø16mm tube. Spring loaded adjustment.


Z4007.456

7200.020 2 X M8 mounting holes.


133

150

60

2 x M6HOLES

Ø16

Z4007.067 ARMSBlack ‘Minibrac’ arm assembly

ø13mm tube.



Z4007.067


Panoramic Mirrors Mirror Arms

7803.000 PANORAMIC MIRROROver door mirror.


Stainless steel mounting.

7803.000

103

210

70

155

25

7840.002 PANORAMIC MIRRORBlind spot circular mirror.


Black housing.

7840.002


7200.050.A ARMSBlack. ‘Midibrac’ arm assembly



7200.050.A

Adjustment can only be done when the arm is securely mounted.

225

125

60

2 x M6HOLES 150

Ø16




7200.025.A


170

100

60

2 x M6HOLES

216

Ø16




7200.099.A


To fit Volvo Construction Machine (VCE)

Mirror Arms Mirror Arms

Z4007.522 R.H Z4007.523 L.H ARMSBlack. ‘Midibrac’ arm assembly

ø16mm tube.

Z4007.522 Right hand.

Z4007.523 Left hand.



Z4007.522 R.H. Z4007.523 L.H.


150deg

150deg

RH

LH

407

85deg

Ø16

202

85deg

60

HOLES2 x M6

Z4007.526 ARMSBlack. ‘Midibrac’ arm assembly



Z4007.526


Ø16

27deg16

2 x M6HOLES

60

264

7200.007.A ARMSBlack. ’Midibrac’ arm assembly

Ø16mm tube.

Spring Loaded Adjustment.

2 x M6 Mounting Holes.

7200.007.A


160

243

Ø16

68

10960

2 x M6HOLES


7270.050.A ARMSMedium duty extendable mirror arm.

ø19mm tube.

Designed for installations above 2 Mts.

For use with 7130 Series heads.

7270.050.B 8 pack

7270.050.F 52 pack

To fit Valtra Tractors.

277

Ø19

420-665

38

7260.002.A RH 7260.003.A LH ARMSHeavy duty extendable mirror arms.

ø22mm tube.

Designed for installations above 2Mts.

For use with 7132 & 7130 series heads.

7260.002.A RH. 7260.003.A LH

Detent positions at increments of 10° from centre line.

7270.550.A ARMSMedium duty extendable mirror arm.

ø19mm tube.

Designed for installations above 2 Mts.

Pre-wired with plug and cable for use with 7132.516.A. Remote Control Heads.

7270.550.A

To fit Valtra Tractors.

Mirror Arms Index

7135 SERIES....................................................6 7135.050. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67135.053 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67137.000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77137.001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77137.100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 7137.101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87137.200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87137.201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 7265.001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .337265.002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 7265.501 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .337265.502 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

7124.001.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87120.200.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

7120.320.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97180.320 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97180.320. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10605.000.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10639.000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 17182.320.A........................................347112.020.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .347112.021.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .347107.001.A........................................35 7106.000.A........................................35

7812.161 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1 7020.000. RH...................................................117020.001. LH...................................................127182.201.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127131.000.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127131.001.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137130.004.A........................................147130.002.A........................................157130.000.A RH ................................................157130.001.A LH................................................157132.001.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157133.000.A.......................................357133.001.A........................................357132.500.A........................................367132.501.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

7802.000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157803.001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167803.000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167840.002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Z4007.067. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Z4007-313 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Z4007.456 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Z4007.522 R.H.....................................................18Z4007.523 L.H.....................................................36 Z4007.526 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67200.007.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67200.050.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77200.025.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77200.099.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 7270.550.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87270.050.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87260.002.A RH.............. ........................................87260.003.A LH......................................................8

FEATURE PRODUCTS

INTERIOR MIRRORS

UNIVERSAL FIT MIRRORS

MIRROR HEADS

PANORAMIC MIRRORS

MIRROR ARMS

XX Mirrors visit our website | www.britax-pmg.com22 23Mirrors visit our website | www.britax-pmg.com call our sales team | 01262 670161 Mirrors

Mirrors - sigesg.com · 1/15/2016 · INTERIOR MIRRORS 10 UNIVERSAL FIT MIRRORS 11 MIRROR HEADS 14...

Documents

Transcript of Mirrors - sigesg.com · 1/15/2016 · INTERIOR MIRRORS 10 UNIVERSAL FIT MIRRORS 11 MIRROR HEADS 14...