FCC Compliance Bulletin - Federal Communications Commission (FCC
Miniweb M730 FCC
Transcript of Miniweb M730 FCC
Avery DennisonSmartracProduct Data Sheet
Miniweb M730 FCC
Miniweb-FCC-M730-06-21-EN-DS
OverviewFrequency BandUHF 860 - 960 MHz
ChipImpinj 730
Antenna Dimensions42 x 16 mm / 1.70 x 0.60 in
International StandardISO/IEC 18000-63, EPC Gen2 V2
Industry SegmentsApparelAutomotiveLogistics
ApplicationsHome EssentialsInventory and LogisticsSupply Chain Management
RoHSEU Directive 2011/65/EU and Directive (EU) 2015/863 Compliant
REACHRegulation (EC) No. 1907/2006
English, p1
rfid.averydennison.com
Tagging the difficult to tag in retail and beyondMiniweb M730/750 FCC inlays from Avery Dennison are designed for global retail, industry, and supply-chain applications. They excel in minimum footprint and top performance on difficult-to-tag and low-detuning materials such as cardboard and plastic, and in other demanding, close-coupling environments.
Miniweb FCC M730/750 is an small form factor retail-centric inlay available on the market that has passed ARC category F, G, M,N,Q, W2, W5, W6, requirements in FCC frequency band.
Equipped with an M750 IC from Impinj (also available with the M730 IC from Impinj), Miniweb FCC M750 features 96-bit EPC memory and 32-bit user memory. The IC is compatible with the global GS1 UHF Gen2v2 standard and features a privacy mode that enables loss prevention and protects consumer privacy.
Available in dry, wet, and paper tag delivery formats, Miniweb FCC M730 inlays have a compact size 45 x 18 mm which can be easily converted for end-application usage.
Like all RFID products from Avery Dennison, Miniweb FCC M730/750 inlays are manufactured according to the industry’s highest quality standards, as confirmed by the RFID Lab at Auburn University: The inspection body awarded Avery Dennison its first comprehensive and significant ARC accreditation for quality.
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact informationrfid.averydennison.com/contact North America: +1-866-903-7343 (toll free US)International: +1-678-617-2359
Connect with us on:
Avery DennisonSmartracProduct Data Sheet
Technical features
Miniweb-FCC-M730-06-21-EN-DS
Orientation sensitivity Read range
Chip Impinj Monza 730
EPC and User Memory 128-bit and 0-bit
TID Memory 96-bit / 48-bit unique serial number
Product Code 3007568 3007567 3007556
Delivery Format Dry inlay Wet inlay Label / sticker
Die-Cut Dimension – 45 x 18 mm / 1.80 x 0.70 in 45 x 18 mm / 1.80 x 0.70 in
Inlay Substance PET PET PET
Face Sheet – Clear PET Mid-gloss paper
Standard Pitch 20 mm / 0.79 in
Web Width 48 mm / 1.89 in
Core Size 76 mm / 3 in
Quantity / Reel /Pack
20,000 pcs/reel40,000 pcs/box
20,000 pcs/reel40,000 pcs/box
5,000 pcs/reel10,000 pcs/box
Operating Temperature -45 °C to 85 °C / -49 °F to 185 °F
Certificates ARC
All graphs are indicative: performance in real life applications may vary.
English, p2
Avery DennisonSmartracProduct Data Sheet
Miniweb Global M750
Miniweb-Global-M750-06-21-EN-DS
OverviewFrequency BandUHF 860 - 960 MHz
ChipImpinj M750
Antenna Dimensions42 x 16 mm / 1.70 x 0.60 in
International StandardISO/IEC 18000-63, EPC Gen2 V2
Industry SegmentsApparelAutomotiveLogistics
ApplicationsHome EssentialsInventory and LogisticsSupply Chain Management
RoHSEU Directive 2011/65/EU and Directive (EU) 2015/863 Compliant
REACHRegulation (EC) No. 1907/2006
English, p1
rfid.averydennison.com
Tagging the difficult to tag in retail and beyondMiniweb Global M750 inlays from Avery Dennison are designed for global retail, industry, and supply-chain applications. They excel in minimum footprint and top performance on difficult-to-tag and low-detuning materials such as cardboard and plastic, and in other demanding, close-coupling environments.
Miniweb Global M750 is the smallest retail-centric inlay currently available on the market that has passed ARC category K, I, N, and Q requirements for both the ETSI and the FCC frequency band. Category I indicates that the product is suitable for applications that require superior RF performance.
Equipped with an M750 IC from Impinj (also avaliable with the M730 IC from Impinj), Miniweb Global M750 features 96-bit EPC memory and 32-bit user memory. The IC is compatible with the global GS1 UHF Gen2v2 standard and features a privacy mode that enables loss prevention and protects consumer privacy.
Available in dry, wet, and paper tag delivery formats, Miniweb Global M750 inlays have a compact size 45 x 18 mm which can be easily converted for end-application usage.
Like all RFID products from Avery Dennison, Miniweb Global M750 inlays are manufactured according to the industry’s highest quality standards, as confirmed by the RFID Lab at Auburn University: The inspection body awarded Avery Dennison its first comprehensive and significant ARC accreditation for quality.
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact informationrfid.averydennison.com/contact North America: +1-866-903-7343 (toll free US)International: +1-678-617-2359
Connect with us on:
Avery DennisonSmartracProduct Data Sheet
Technical features
Miniweb-Global-M750-06-21-EN-DS
Orientation sensitivity Read range
Chip Impinj M750
EPC and User Memory 96-bit and 32-bit
TID Memory 96-bit / 48-bit unique serial number
Product Code 3007541 3007542 3007543
Delivery Format Dry inlay Wet inlay Label / sticker
Die-Cut Dimension – 45 x 18 mm / 1.80 x 0.70 in 45 x 18 mm / 1.80 x 0.70 in
Inlay Substrate PET – –
Face Sheet – Clear PET Mid-gloss paper
Standard Pitch 20 mm / 0.79 in
Web Width 48 mm / 1.89 in
Core Size 76 mm / 3 in
Quantity / Reel 5,000 pcs/reel10,000 pcs/reel20,000 pcs/reel
Operating Temperature -45 °C to 85 °C / -49 °F to 185 °F
Certificates ARC
All graphs are indicative: performance in real life applications may vary.
English, p2
Updated: May 2021 Miniweb R6 ETSI Classification: Avery Dennison - Internal
Ideal for small apparel labelsOur Miniweb inlays and tags are designed especially for apparel and supply-chain applications, and feature excellent performance and superior close coupling.
Miniweb inlays and tags have a compact 50 mm / 2 inch form factor, which can be easily converted into small-sized hangtags and other apparel labels, and are produced in dry, wet and label /sticker delivery formats. They are available with the Impinj Monza R6 chip and R6-P chips that come with an autotune feature, which helps the Miniweb product to work at peak efficiency, even in rapidly changing environments. Miniweb with the Monza R6 chip offers unique TID and enables pre-serialized EPC. Inlays with Monza R6-P offer additional features such as add-on user memory and on-demand memory configuration as well as a kill function and easy access control to change tag information for store data, if required.
Miniweb is included on the approved inlay list for boxed electronics by the ARC (Auburn Radio Compliance Center). Miniweb ETSI complies with category K. Furthermore, it meets GS1 Tagged-Item Performance Protocol (TIPP) Tagged-Item Gradings M10B, S15B and M15B, S15B for the retail supply chain, retailers and suppliers.
Our inlays and tags are compliant with ISO 9001:2015 Quality Management and ISO 14001:2015 Environmental Management, which ensure a reliable and state-of-the-art product that meets a variety of application needs, especially in the retail environment.
Avery DennisonSmartracProduct Data Sheet
Miniweb R6 ETSI
Miniweb-R6-ETSI-05-21-EN-DS
Overview
Frequency BandUHF 860 - 960 MHz
ChipImpinj Monza R6
Antenna Dimensions42 x 16 mm / 1.65 x 0.63 in
International StandardISO 18000-63, EPC Class 1 Gen 2
Industry SegmentsApparelLogisticsHealthcare
ApplicationsSupply Chain ManagementHome EssentialsInventory and Logistics
RoHSEU Directive 2011/65/EC and Directive (EU) 2015/863
REACHRegulation (EC) No. 1907/2006
rfid.averydennison.com
Updated: May 2021 Miniweb R6 ETSI Classification: Avery Dennison - Internal
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact informationrfid.averydennison.com/contact North America: +1-866-903-7343 (toll free US)International: +1-678-617-2359
Connect with us on:
Avery DennisonSmartracProduct Data Sheet
Technical features
Miniweb-R6-ETSI-05-21-EN-DS
Orientation sensitivity ETSI read range
Chip Impinj Monza R6
EPC and User Memory 96-bit
TID Memory 96-bit / 48-bit unique serial number
Product Code 3003296 3004491 3005084
Delivery Format Label / sticker Dry inlay Wet inlay
Die-Cut Dimension 45 x 18 mm / 1.77 x 0.71 in – 45 x 18 mm / 1.77 x 0.71 in
Inlay Substrate PET PET PET
Face Sheet Mid-gloss paper - Clear PET
Standard Pitch 20 mm / 0.787 in 20 mm / 0.787 in 20 mm / 0.787 in
Web Width 48 mm / 2 in 48 mm / 2 in 48 mm / 2 in
Core Size 76 mm / 3 in 76 mm / 3 in 76 mm / 3 in
Quantity / Reel 10,000 pcs/reel20,000 pcs/box
10,000 pcs/reel20,000 pcs/box
10,000 pcs/reel10,000 pcs/box
Operating Temperature -40 °C to 85 °C / -40 °F to 185 °F
Certificates ARC
All graphs are indicative: performance in real life applications may vary.
Updated: May 2021 Miniweb R6 FCC Classification: Avery Dennison - ConfidentialUpdated: May 2021 Miniweb R6 FCC Classification: Avery Dennison - Internal
Ideal for small apparel labelsOur Miniweb inlays and tags are designed especially for apparel and supply-chain applications, and feature excellent performance and superior close coupling.
Miniweb inlays and tags have a compact 50 mm / 2 inch form factor, which can be easily converted into small-sized hangtags and other apparel labels, and are produced in dry, wet and label /sticker delivery formats. They are available with the Impinj Monza R6 chip and R6-P chips that come with an autotune feature, which helps the Miniweb product to work at peak efficiency, even in rapidly changing environments. Miniweb with the Monza R6 chip offers unique TID and enables pre-serialized EPC. Inlays with Monza R6-P offer additional features such as add-on user memory and on-demand memory configuration as well as a kill function and easy access control to change tag information for store data, if required.
Miniweb is included on the approved inlay list for boxed electronics by the ARC (Auburn Radio Compliance Center). Miniweb FCC complies with categories A, B, D, G, M, Q. Furthermore, it meets GS1 Tagged-Item Performance Protocol (TIPP) Tagged-Item Gradings M10B, S15B and M15B, S15B for the retail supply chain, retailers and suppliers.
Our inlays and tags are compliant with ISO 9001:2015 Quality Management and ISO 14001:2015 Environmental Management, which ensure a reliable and state-of-the-art product that meets a variety of application needs, especially in the retail environment.
Avery DennisonSmartracProduct Data Sheet
Miniweb R6 FCC
Miniweb-R6-FCC-05-21-EN-DS
Overview
Frequency BandUHF 860 - 960 MHz
ChipImpinj Monza R6
Antenna Dimensions42 x 16 mm / 1.65 x 0.63 in
International StandardISO 18000-63, EPC Class 1 Gen 2
Industry SegmentsApparelLogisticsHealthcare
ApplicationsSupply Chain ManagementHome EssentialsInventory and Logistics
RoHSEU Directive 2011/65/EC and Directive (EU) 2015/863
REACHRegulation (EC) No. 1907/2006
rfid.averydennison.com
Image showing Miniweb R6 ETSI
Updated: May 2021 Miniweb R6 FCC Classification: Avery Dennison - ConfidentialUpdated: May 2021 Miniweb R6 FCC Classification: Avery Dennison - Internal
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact informationrfid.averydennison.com/contact +1-678-617-2359
Connect with us on:
Avery DennisonSmartracProduct Data Sheet
Technical features
Miniweb-R6-FCC-05-21-EN-DS
Orientation sensitivity
Chip Impinj Monza R6
EPC and User Memory 96-bit
TID Memory 96-bit / 48-bit unique serial number
Product Code 3005229 3004859 3004855
Delivery Format Wet inlay Label / sticker Dry inlay
Die-Cut Dimension 45 x 18 mm / 1.80 x 0.70 in 45 x 18 mm / 1.80 x 0.70 in –
Inlay Substrate PET PET PET
Face Sheet Clear PET Mid-gloss paper -
Standard Pitch 20 mm / 0.787 in 20 mm / 0.787 in 20 mm / 0.787 in
Web Width 48 mm / 2 in 48 mm / 2 in 48 mm / 2 in
Core Size 76 mm / 3 in 76 mm / 3 in 76 mm / 3 in
Quantity / Reel 10,000 pcs/reel30,000 pcs/reel
5,000 pcs/reel10,000 pcs/box
15,000 pcs/reel30,000 pcs/box
Operating Temperature -40 °C to 85 °C / -40 °F to 185 °F
Certificates ARC
All graphs are indicative: performance in real life applications may vary.
FCC read range
Ideal for small apparel labelsOur Miniweb inlays and tags are designed especially for apparel and supply-chain applications, and feature excellent performance and superior close coupling.
Miniweb inlays and tags have a compact 50 mm / 2 inch form factor, which can be easily converted into small-sized hangtags and other apparel labels, and are produced in dry, wet and label /sticker delivery formats. They are available with the Impinj Monza R6 chip and R6-P chips that come with an autotune feature, which helps the Miniweb product to work at peak efficiency, even in rapidly changing environments. Miniweb with the Monza R6 chip offers unique TID and enables pre-serialized EPC. Inlays with Monza R6-P offer additional features such as add-on user memory and on-demand memory configuration as well as a kill function and easy access control to change tag information for store data, if required.
Miniweb is included on the approved inlay list for boxed electronics by the ARC (Auburn Radio Compliance Center). Miniweb FCC complies with categories A, B, D, G, M, Q. Furthermore, it meets GS1 Tagged-Item Performance Protocol (TIPP) Tagged-Item Gradings M10B, S15B and M15B, S15B for the retail supply chain, retailers and suppliers.
Our inlays and tags are compliant with ISO 9001:2015 Quality Management and ISO 14001:2015 Environmental Management, which ensure a reliable and state-of-the-art product that meets a variety of application needs, especially in the retail environment.
Avery DennisonSmartracProduct Data Sheet
Miniweb R6-P ETSI
Miniweb-R6-P-ETSI-05-21-EN-DS
OverviewFrequency BandUHF 860 - 960 MHz
ChipImpinj Monza R6-P
Antenna Dimensions42 x 16 mm / 1.65 x 0.63 in
International StandardISO 18000-6C, EPC Class 1 Gen 2
Industry SegmentsApparelLogisticsHealthcare
ApplicationsSupply Chain ManagementHome EssentialsInventory and Logistics
RoHSEU Directive 2011/65/EC and Directive (EU) 2015/863
REACHRegulation (EC) No. 1907/2006
rfid.averydennison.com
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact informationrfid.averydennison.com/contact North America: +1-866-903-7343 (toll free US)International: +1-678-617-2359
Connect with us on:
May 2021
Avery DennisonSmartracProduct Data Sheet
Technical features
Miniweb-R6-P-ETSI-05-21-EN-DS
Orientation sensitivity ETSI read range
Chip Impinj Monza R6-P
EPC and User Memory 128/96-bit and 32/64-bit
TID Memory 96-bit / 48-bit unique serial number
Product Code 3005074 3005075 3005078
Delivery Format Wet inlay Label / sticker Dry inlay
Die-Cut Dimension 45 x 18 mm / 1.80 x 0.70 in 45 x 18 mm / 1.80 x 0.70 in –
Inlay Substance PET
Face Sheet Clear PET Mid-gloss paper Clear PET
Standard Pitch 20 mm / 0.787 in
Web Width 48 mm / 2 in
Core Size 76 mm / 3 in
Quantity / Reel 10,000 pcs/reel 10,000 pcs/reel20,000 pcs/box
10,000 pcs/reel
Operating Temperature -40 °C to 85 °C / -40 °F to 185 °F
Certificates ARC
All graphs are indicative: performance in real life applications may vary.
FCC read range
Ideal for small apparel labelsOur Miniweb inlays and tags are designed especially for apparel and supply-chain applications, and feature excellent performance and superior close coupling.
Miniweb inlays and tags have a compact 50 mm / 2 inch form factor, which can be easily converted into small-sized hangtags and other apparel labels, and are produced in dry, wet and label /sticker delivery formats. They are available with the Impinj Monza R6 chip and R6-P chips that come with an autotune feature, which helps the Miniweb product to work at peak efficiency, even in rapidly changing environments. Miniweb with the Monza R6 chip offers unique TID and enables pre-serialized EPC. Inlays with Monza R6-P offer additional features such as add-on user memory and on-demand memory configuration as well as a kill function and easy access control to change tag information for store data, if required.
Miniweb is included on the approved inlay list for boxed electronics by the ARC (Auburn Radio Compliance Center). Miniweb FCC complies with categories A, B, D, G, M, Q. Furthermore, it meets GS1 Tagged-Item Performance Protocol (TIPP) Tagged-Item Gradings M10B, S15B and M15B, S15B for the retail supply chain, retailers and suppliers.
Our inlays and tags are compliant with ISO 9001:2015 Quality Management and ISO 14001:2015 Environmental Management, which ensure a reliable and state-of-the-art product that meets a variety of application needs, especially in the retail environment.
Avery DennisonSmartracProduct Data Sheet
Miniweb R6-P FCC
Miniweb-R6-P-FCC-05-21-EN-DS
Overview
Frequency BandUHF 860 - 960 MHz
ChipImpinj Monza R6-P
Antenna Dimensions42 x 16 mm / 1.65 x 0.63 in
International StandardISO 18000-63, EPC Class 1 Gen 2
Industry SegmentsApparelLogisticsHealthcare
ApplicationsSupply Chain ManagementHome EssentialsInventory and Logistics
RoHSEU Directive 2011/65/EC and Directive (EU) 2015/863
REACHRegulation (EC) No. 1907/2006
rfid.averydennison.com
Image showing Miniweb R6 ETSI
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact informationrfid.averydennison.com/contact North America: +1-866-903-7343 (toll free US)International: +1-678-617-2359
Connect with us on:
Avery DennisonSmartracProduct Data Sheet
Technical features
Miniweb-R6-P-FCC-05-21-EN-DS
Orientation sensitivity
Chip Impinj Monza R6-P
EPC and User Memory 128/96-bit and 32/64-bit
TID Memory 96-bit / 48-bit unique serial number
Product Code 3005081 3005082 3005079
Delivery Format Wet inlay Label / sticker Dry inlay
Die-Cut Dimension 45 x 18 mm / 1.80 x 0.70 in 45 x 18 mm / 1.80 x 0.70 in –
Inlay Substrate PET PET PET
Face Sheet Clear PET Mid-gloss paper -
Standard Pitch 20 mm / 0.787 in 20 mm / 0.787 in 20 mm / 0.787 in
Web Width 48 mm / 1.9 in 48 mm / 1.9 in 48 mm / 1.9 in
Core Size 76 mm / 3 in 76 mm / 3 in 76 mm / 3 in
Quantity / Reel 10,000 pcs/reel30,000 pcs/reel
,000 pcs/reel10,000 pcs/box
15,000 pcs/reel30,000 pcs/box
Operating Temperature -40 °C to 85 °C / -40 °F to 185 °F
Certificates ARC
All graphs are indicative: performance in real life applications may vary.
FCC read range
Avery DennisonSmartracProduct Data Sheet
Miniweb
Miniweb-UCODE-7-ETSI-09-21-EN-DS
OverviewFrequency BandUHF 860 - 960 MHz
ChipNXP UCODE 7
Antenna Dimensions46 x 16 mm / 1.80 x 0.60 in
International StandardISO 18000-6C, EPC Class 1 Gen 2
Industry SegmentsApparelLogisticsHealthcare
ApplicationsSupply Chain ManagementHome EssentialsInventory and Logistics
RoHSEU Directive 2011/65/EC and Directive (EU) 2015/863
REACHRegulation (EC) No 1907/2006
English, p1
rfid.averydennison.com
Ideal for small apparel labelsOur Miniweb inlays and tags are designed for global retail, industry and supply-chain applications, and feature excellent performance and superior close coupling.
Miniweb inlays and tags have a compact 50 mm / 2 inch form factor, which can be easily converted into small-sized hangtags and other apparel labels, and are produced in dry, wet and label / sticker delivery formats. They are available with the NXP UCODE 7 that offers unique TID, enables pre-serialized EPC and parallel encoding, and provides a product status flag.
Miniweb with the NXP UCODE 7, used in retail applications, is included on the approved inlay list for boxed electronics by the RFID Research Center of the University of Auburn, and complies with category A, B, D, and G. Furthermore, it meets GS1 Tagged-Item Performance Protocol (TIPP) Tagged-Item Gradings M10B and S10B, M15B and S15B for the retail supply chain, retailers and Suppliers.
Our inlays and tags are compliant with ISO 9001:2015 Quality Management and ISO 14001:2015 Environmental Management, which ensure a reliable and state-of-the-art product that meets a variety of application needs, especially in the retail environment.
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact informationrfid.averydennison.com/contact North America: +1-866-903-7343 (toll free US)International: +1-678-617-2359
Connect with us on:
Avery DennisonSmartracProduct Data Sheet
Technical features
Miniweb-UCODE-7-ETSI-09-21-EN-DS
Orientation sensitivity Read range
Chip NXP UCODE 7
EPC and User Memory 128-bit and n/a
TID Memory 96-bit / 48-bit unique serial number
Product Code 3003013 3003014 3003015 3004499 3005233
Delivery Format Dry inlay Wet inlay Label / sticker Dry inlay Wet inlay
Die-Cut Dimension – 49 x 18 mm1.93 x 0.71 in
49 x 18 mm1.93 x 0.71 in
– 49 x 18 mm1.93 x 0.71 in
Inlay Substrate PET PET PET PET PET
Face Sheet Clear PET Clear PET Mid-gloss paper - Clear PET
Standard Pitch 20 mm / 0.787 in 20 mm / 0.787 in 20 mm / 0.787 in 20 mm / 0.787 in 20 mm / 0.787 in
Web Width 50 mm / 1.97 in 54 mm / 2.1 in 54 mm / 2.1 in 54 mm / 2.1 in 54 mm / 2.1 in
Core Size 76 mm / 3 in
Quantity / Reel 15,000 pcs/reel30,000 pcs/box
15,000 pcs/reel30,000 pcs/box
15,000 pcs/reel30,000 pcs/box
15,000 pcs/reel-
10,000 pcs/reel10,000 pcs/box
Operating Temperature
-40 °C to 85 °C / -40 °F to 185 °F
Certificates ARC
All graphs are indicative: performance in real life applications may vary.
English, p2
Avery DennisonSmartrac
rfid.averydennison.com
Product Data SheetInlays and Tags
Frequency BandUHF 860 - 960 MHz
ChipNXP UCODE 8
Antenna Dimensions42 x 16 mm / 1.70 x 0.60 in
International StandardISO 18000-6C, EPC Class 1 Gen 2
Industry SegmentsApparelLogisticsHealthcare
ApplicationsSupply Chain ManagementHome EssentialsInventory and Logistics
RoHsEU Directive 2011/65/EU and 2015/863 Compliant
REACHRegulation (EC) No 1907/2006
Overview
Miniweb-UCODE-8-ETSI/03/21/DS
Our Miniweb inlays and tags are designed for global retail, industry and supply-chain applications, offering excellent performance on difficult-to-tag or low-detuning materials such as cardboard and plastic, and in other demanding, close-coupling environments.
Miniweb inlays and tags have a compact size 45 x 18 mm, which can be easily converted into end-application usage, and are available in dry, wet and label / sticker delivery formats. Miniweb equipped with NXP UCODE 8 offers the same memory size and typical IC features as NXP UCODE 7. Furthermore, it offers a self adjust feature to maximize product performance in challenging environments and has an improved read and write sensitivity and faster encoding speed compared to NXP UCODE 7. Furthermore, the chip has an integrated brand identifier function to prove product authenticity and a memory safeguard system to protect business data.
Miniweb with the NXP UCODE 8 IC, used in retail applications, is the smallest inlay currently available on the market that has passed ARC categories I and K requirements by the RFID Research Center of the University of Auburn for ETSI retail performances. Category I indicates the product is suitable for applications such as home goods and merchandising areas with a greater demand of RF performance than typical retail apparel applications.
Ideal for small apparel labels
Miniweb
Avery DennisonSmartrac
Product Data SheetInlays and Tags
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact information rfid.averydennison.com/contact North America: +1-866-903-7343 (toll free US) International: +1-678-617-2359
Technical features
Chip NXP UCODE 8
EPC and User Memory 128-bit and n/a
TID Memory 96-bit / 48-bit unique serial number
Product Code 3006899 3006900 3006901
Delivery Format Dry inlay Wet inlay Label / sticker
Die-cut Dimension - 45 x 18 mm / 1.80 x 0.70 in 45 x 18 mm / 1.80 x 0.70 in
Inlay Substrate PET
Face Sheet Clear PET Clear PET Mid-gloss paper
Standard Pitch 20 mm / 0.787 in
Web Width 48 mm / 2 in
Core Size 76 mm / 3 in
Quantity / Reel 10000 pcs/reel 10000 pcs/reel20000 pcs/box
5000 pcs/reel10000 pcs/box
Operating Temperature
-40 °C to 85 °C-40 °F to 185 °F
Certificate ARC
Miniweb-UCODE-8-ETSI/03/21/DS
Read rangeOrientation sensitivity
0
2
4
6
8
10
12
14
16
860 870 880 890 900 910 920 930 940 950 960
Read Range (m)
Theo
re�
cal
read
ran
ge (
m)
Frequency (MHz)
Free Air
Plas�c
Teflon
Orienta�on Sensi�vity
015
30
45
60
75
90
105
120
135
150165180195
210225
240
255
270
285
300
315
330345
0
2
4
6
8
10
12
14
16
860 870 880 890 900 910 920 930 940 950 960
Read Range (m)
Theo
re�
cal
read
ran
ge (
m)
Frequency (MHz)
Free Air
Plas�c
Teflon
Orienta�on Sensi�vity
015
30
45
60
75
90
105
120
135
150165180195
210225
240
255
270
285
300
315
330345
All graphs are indicative: performance in real life applications may vary.
Avery DennisonSmartrac
rfid.averydennison.com
Product Data SheetInlays and Tags
Frequency BandUHF 860 - 960 MHz
ChipNXP UCODE 8
Antenna Dimensions42 x 16 mm / 1.70 x 0.60 in
International StandardISO 18000-6C, EPC Class 1 Gen 2ISO 18000-63
Industry SegmentsApparelLogisticsHealthcare
ApplicationsSupply Chain ManagementHome EssentialsInventory and Logistics
RoHsEU Directive 2011/65/EU and 2015/863 Compliant
REACHRegulation (EC) No 1907/2006
Overview
Miniweb-UCODE-8-FCC/03/21/DS
Our Miniweb inlays and tags are designed for global retail, industry and supply-chain applications, offering excellent performance on difficult-to-tag or low-detuning materials such as cardboard and plastic, and in other demanding, close-coupling environments.
Miniweb inlays and tags have a compact size 45 x 18 mm, which can be easily converted into end-application usage, and are available in dry, wet and label / sticker delivery formats. Miniweb equipped with NXP UCODE 8 offers the same memory size and typical IC features as NXP UCODE 7. Furthermore, it offers a Self Adjust feature to maximize product performance in challenging environments and has an improved read and write sensitivity and faster encoding speed compared to NXP UCODE 7. Furthermore, the chip has an integrated Brand Identifier function to prove product authenticity and a memory safeguard system to protect business data.
Miniweb with the NXP UCODE 8 IC, used in retail applications, is the smallest inlay currently available on the market that has passed ARC categories I and K requirements by the RFID Research Center of the University of Auburn for ETSI retail performances. Category I indicates the product is suitable for applications such as home goods and merchandising areas with a greater demand of RF performance than typical retail apparel applications.
Ideal for small apparel labels
Miniweb
Avery DennisonSmartrac
Product Data SheetInlays and Tags
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact information rfid.averydennison.com/contact North America: +1-866-903-7343 (toll free US) International: +1-678-617-2359
Technical features
Chip NXP UCODE 8
EPC and User Memory 128-bit and n/a
TID Memory 96-bit / 48-bit unique serial number
Product Code 3007033 3007034 3007035
Delivery Format Dry inlay Wet inlay Label/sticker
Die-cut Dimension - 45 x 18 mm / 1.80 x 0.70 in 45 x 18 mm / 1.80 x 0.70 in
Inlay Substrate PET
Face Sheet Clear PET Clear PET Mid-gloss paper
Standard Pitch 20 mm / 0.787 in
Web Width 48 mm / 2 in
Core Size 76 mm / 3 in
Quantity / Reel 10000 pcs/reel20000 pcs/box
20000 pcs/reel40000 pcs/box
5000 pcs/reel10000 pcs/box
Operating Temperature
-40 °C to 85 °C-40 °F to 185 °F
Certificate ARC
Miniweb-UCODE-8-FCC/03/21/DS
Read rangeOrientation sensitivity
0
2
4
6
8
10
12
14
16
860 870 880 890 900 910 920 930 940 950 960
Read Range (m)
Theo
re�
cal
read
ran
ge (
m)
Frequency (MHz)
Free Air
Plas�c
Teflon
Orienta�on Sensi�vity
015
30
45
60
75
90
105
120
135
150165180195
210225
240
255
270
285
300
315
330345
0
2
4
6
8
10
12
14
16
860 870 880 890 900 910 920 930 940 950 960
Read Range (m)
Theo
re�
cal
read
ran
ge (
m)
Frequency (MHz)
Free Air
Plas�c
Teflon
Orienta�on Sensi�vity
015
30
45
60
75
90
105
120
135
150165180195
210225
240
255
270
285
300
315
330345
All graphs are indicative: performance in real life applications may vary.
Avery DennisonSmartracProduct Data Sheet
AD Miniweb U9 FCC
AD-Miniweb-U9-FCC-09-21-EN-DS
OverviewFrequency BandUHF 860 - 960 MHz
ChipNXP UCODE 9
Antenna Dimensions42 x 16 mm / 1.70 x 0.60 in
International StandardISO 18000-63, EPC Class 1 Gen 2
Industry SegmentsApparelLogisticsHealthcare
ApplicationsSupply Chain ManagementHome EssentialsInventory and Logistics
RoHSEU Directive 2011/65/EC and Directive (EU) 2015/863
REACHRegulation (EC) No 1907/2006
English, p1
rfid.averydennison.com
Ideal for small apparel labelsThe AD Miniweb U9 FCC inlays and tags are designed for global retail, industrial and supply-chain applications, offering excellent performance on difficult-to-tag or low-detuning materials such as cardboard and plastic, and in other demanding, close-coupling environments.
Miniweb inlays and tags have a compact size of 45 x 18 mm, which can be easily converted into end-application usage, and are available in dry, wet and label / sticker delivery formats. Miniweb equipped with NXP UCODE 9 offers 96-bit of EPC memory. Furthermore, it offers a self adjust feature to maximize product performance in challenging environments, and has an improved read and write sensitivity and faster encoding speed compared to NXP U8.
AD Miniweb inlays with the UCODE 9 IC, used in retail applications, has passed ARC categories F, G, N, M, W2, W5, W6 and Q requirements defined by the RFID Research Center at the University of Auburn for FCC retail performances. This indicates the product is suitable for applications such as home goods and merchandising areas with a greater demand of RF performance than typical retail apparel applications.
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact informationrfid.averydennison.com/contact North America: +1-866-903-7343 (toll free US)International: +1-678-617-2359
Connect with us on:
Avery DennisonSmartracProduct Data Sheet
Technical features
Orientation sensitivity Read range
Chip NXP UCODE 9
EPC and User Memory 96-bit and n/a
TID Memory 96-bit / 48-bit unique serial number
Product Code 3008005 3008006 3008017
Delivery Format Dry inlay Wet inlay Label / sticker
Die-Cut Dimension – 45 x 18 mm / 1.80 x 0.70 in 45 x 18 mm / 1.80 x 0.70 in
Inlay Substrate PET PET PET
Face Sheet NA NA Mid-gloss paper
Standard Pitch 20 mm / 0.787 in 20 mm / 0.787 in 20 mm / 0.787 in
Web Width 48 mm / 1.89 in 48 mm / 1.89 in 48 mm / 1.89 in
Core Size 76 mm / 3 in 76 mm / 3 in 76 mm / 3 in
Quantity / Reel 10,000 pcs/reel20,000 pcs/box
20,000 pcs/reel40,000 pcs/box
5,000 pcs/reel10,000 pcs/box
Operating Temperature -40 °C to 85 °C / -40 °F to 185 °F
Certificates ARC
All graphs are indicative: performance in real life applications may vary.
English, p2AD-Miniweb-U9-FCC-09-21-EN-DS
Avery DennisonSmartracProduct Data Sheet
Miniweb
Miniweb-UCODE-G2iL-09-21-EN-DS
OverviewFrequency BandUHF 860 - 960 MHz
ChipNXP UCODE G2iL
Antenna Dimensions40 x 18 mm / 1.575 x 0.709 in
International StandardISO 18000-6C, EPC Class 1 Gen 2
Industry SegmentsApparelLogisticsHealthcare
ApplicationsSupply Chain ManagementHome EssentialsInventory and Logistics
RoHSEU Directive 2011/65/EC
REACHRegulation (EC) No 1907/2006
English, p1
rfid.averydennison.com
Ideal for small apparel labelsOur Miniweb inlays and tags are designed especially for apparel applications. They are high quality and can be converted into small sized hang tags and other apparel labels. Miniweb tags and inlays have superior close coupling features.
Miniweb inlays and tags have a small compact 43 mm / 2 inch form factor, which can be easily converted into small-sized hangtags and other apparel labels.
They are with the NXP UCODE G2iL chip that offers unique TID and is available with NXP UCODE G2iL and G2iL+ IC platforms.
Our inlays and tags are compliant with ISO 9001:2015 Quality Management and ISO 14001:2015 Environmental Management, which ensure a reliable and state-of-the-art product that meets a variety of application needs, especially in the retail environment.
© 2021 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.
Warranty: Please refer to Avery Dennison standard terms and conditions: rfid.averydennison.com/termsandconditions
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics / RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer / user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Contact informationrfid.averydennison.com/contact North America: +1-866-903-7343 (toll free US)International: +1-678-617-2359
Connect with us on:
Avery DennisonSmartracProduct Data Sheet
Technical features
Miniweb-UCODE-G2iL-09-21-EN-DS
Orientation sensitivity Read range
Chip NXP UCODE G2iL
EPC and User Memory 128-bit
TID Memory 96-bit / 32-bit unique serial number
Product Code 3001961
Delivery Format Wet inlay
Die-Cut Dimension 43 x 21 mm / 1.693 x 0.827 in
Inlay Substrate PET
Face Sheet Clear PET
Standard Pitch 24 mm / 0.945 in
Web Width 48 mm / 1.890 in
Core Size 76 mm / 3 in
Quantity / Reel 5,000 pcs/reel / 10.000 pcs/box
Operating Temperature -40 °C to 85 °C / -40 °F to 185 °F
Certificates ARC
All graphs are indicative: performance in real life applications may vary.
English, p2