MINIFLEX 3-BFN L-LK-HD - I-PEX · FPC Thickness (mm) 0.2+/-0.03 Current Rating 0.3A /pin Contact...
Transcript of MINIFLEX 3-BFN L-LK-HD - I-PEX · FPC Thickness (mm) 0.2+/-0.03 Current Rating 0.3A /pin Contact...
Lock
FPC with cutout
MINIFLEX® 3-BFN L-LK-HD 0.3 mm pitch, Horizontal mating, Backflip, Mechanical lock, Hold down, with long actuator (Height = 0.9 mm)
High FPC retention force with additional mechanical lockHold down to improve strength of side wall
Usability for closing actuator without FPC
High FPC Retention Force with Additional Mechanical Lock*Please inquire for pin counts not listed or outside of the pin count range.
Pin counts:Range Up to 57Available 11, 40, 45
Part Number 20655
Contact Pitch (mm) 0.3
Board Pitch (mm) 0.6
Height (mm) 0.90+/-0.10
Width Formula (mm) 2.7 + (0.3*?p)
Depth(mm)
Actuator Open 2.55
Actuator Close 3.5
Wiping Length(mm)
Contact A 0.9
Contact B 0.45
FPC Insertion Depth (mm) 1.1
FPC Thickness (mm) 0.2+/-0.03
Current Rating 0.3A /pin
Contact point Top and Bottom
Compatibility Original
MINIFLEX® 3-BFN L-LK-HD MINIFLEX® 3-BFN Long
20.710 N 15.535 N
FPC LOCK mechanism maintainshigh FPC retention force
FPC retention force comparison (45 p)Lock
FPC with cutout
Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0
Hold Down to Improve Strength of Side Wall
Connector will still function reliably(Contact gap graph MINIFLEX® 3-BFN L-HD 51 pins before and after operating actuator without FPC inserted)
Retention force of connector does not change greatly
Insertion force of connector goes up
The connector will still function even if the actuator is accidentally closed without the FPC being inserted after the SMT process
0.207 0.188 0.187 0.186 0.185 0.1850.204 0.177 0.176 0.175 0.173 0.173
0.00mm
0.10mm
0.20mm
0.30mm
0
CONTACT-ACONTACT-B
Initial 1time 2times 5times 10times 20times
Usability for Closing Actuator without FPC
<Strength improvement>
MINIFLEX® 3-BFN L-LK-HDComponent Parts Detail
Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0
Connector Assembly :
Rev.8
Connector Assembly :
Rev.8
Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0
Connector Assembly :
Rev.8
Connector Assembly :
Rev.8
Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0
Connector Assembly :
Rev.8
Connector Assembly :
Rev.8
I-PEX, MHF, CABLINE, NOVASTACK, EVAFLEX, MINIFLEX, ISH, IARPB, IASLP, ESTORQ, i-Fit and ISFITare registered trademarks of I-PEX Inc. Please note that the contents in the catalog might bechanged without prior notification. I-PEX Inc. assumes no responsibility for any inaccuracies orobligation to update Information on these documents. Please be sure to read and understand thelatest "Precautions for Use" and "Instruction Manual" before you use our products. We shall not beresponsible for any defects, damages or troubles in case you use our products without followingthe precautions for use. Please feel free to contact our sales representatives when you use ourproducts for any applications that require very high reliability and safety, or that relate to humanlife (ex. nuclear power control, aerospace, transportation, medical equipment, safety equipment etc.).
Contact your sales representative for more detailed information. [ i-pex.com ]
Copyright © I-PEX Inc. 2020. All rights reserved.
202008R0