Miniature List of Models - Omron...No. 438A Alexandra Road # 05-05/08(Lobby 2), Alexandra...
4
NEW MY-GS Miniature Power Relays First appearing in 1966, over 800 million MY-series Relays had been manufactured by 2012. The MY Series grew to meet the needs of the day, and will continue to meet your needs in the future. 1966: MY Relays 1998: MY(S) Relays Models with a Latching Lever Join the MY Family of OMRON’ s Recent Longtime Best-selling Relays Models with a Latching Lever Join the MY Family of OMRON’ s Recent Longtime Best-selling Relays Relays with Latching Levers
Transcript of Miniature List of Models - Omron...No. 438A Alexandra Road # 05-05/08(Lobby 2), Alexandra...
List of Models
Accessories (Order Separately)Connection Sockets and Hold-down Clips
Mounting
Terminal Type
Hold-down Clips
Front-mounting Sockets Back-mounting Sockets
PCB mountingDIN Track or screw mounting
Screw terminal Finger protection structure
PYF08A-E
PYF14A-E
PYC-A1 Socket combination PYC-P
PYF14A-N PYF-14-PU PY14-02
PYF08A-N PYF-08-PU PY08-02
Push-In Plus Terminal PCB terminals
Ordering Information
MY2N-D2-GS MY4N-D2-GS
MY2N-CR-GS MY4N-CR-GS
MY2-GS MY4-GS
MY2N-GS MY4N-GS
MY2IN-GS MY4IN-GS
MY2IN-D2-GS MY4IN-D2-GS
MY2IN-CR-GS MY4IN-CR-GS
Contact configuration 2C 4CRated voltage (V)
Models with built-in operation indicators having a latching lever
Models with built-in operation indicators having a latching lever, and diodes
Models with built-in operation indicators having a latching lever, and CR circuits
12 VDC, 24 VDC, 48 VDC, 100/110 VDC, 220 VDC
100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC
6 VDC, 12 VDC, 24 VDC, 48 VDC, 100/110 VDC, 220 VDC
12 VAC, 24 VAC, 48 VAC, 100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC
100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC
12 VDC, 24 VDC, 48 VDC, 100/110 VDC, 220 VDC
6 VDC, 12 VDC, 24 VDC, 48 VDC, 100/110 VDC, 220 VDC
12 VAC, 24 VAC, 48 VAC, 100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC
6 VDC, 12 VDC, 24 VDC, 48 VDC, 100/110 VDC
12 VAC, 24 VAC, 48 VAC, 100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC
MY2-GSMY2N-GSMY2N-D2-GSMY2N-CR-GSMY2IN-GSMY2IN-D2-GSMY2IN-CR-GS
MY4-GSMY4N-GSMY4N-D2-GSMY4N-CR-GSMY4IN-GSMY4IN-D2-GSMY4IN-CR-GS
NEW
MY-GS
MiniaturePower Relays
First appearing in 1966, over 800 million MY-series Relays had been manufactured by 2012.The MY Series grew to meet the needs of the day, and will continue to meet your needs in the future.
1966: MY Relays
1998: MY(S) Relays
Models with a Latching Lever Join the MY Family of OMRON’ s Recent Longtime Best-selling RelaysModels with a Latching Lever Join the MY Family of OMRON’ s Recent Longtime Best-selling Relays
Standard models
Models with built-inoperation indicators
Models with built-in operation indicators and diodes
Models with built-in operation indicators and CR circuits
Classification Model
Authorized Distributor:
In the interest of product improvement, specifications are subject to change without notice.
Cat. No. J196-E1-03 0318(0414)
© OMRON Corporation 2014-2018 All Rights Reserved.
OMRON Corporation Industrial Automation Company
Contact: www.ia.omron.comKyoto, JAPAN
OMRON ASIA PACIFIC PTE. LTD.No. 438A Alexandra Road # 05-05/08(Lobby 2),Alexandra Technopark, Singapore 119967Tel: 65-6835-3011/Fax: 65-6835-2711
OMRON (CHINA) CO., LTD.Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, ChinaTel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
OMRON TAIWAN ELECTRONICS INC.6F, Home Young Budg., No.363, Fu-Shing N.Road, Taipei, Taiwan R.O.CTel: (886) 2-2715-3331/Fax: (886) 2-2712-6712
Relays with Latching Levers
There are reasons people continue to choose the MY Series.The MY Series provides a wide variety of models to ensure that we have just the right model for you.
Relays That Latch Contacts in the Operation Position
Relays That Dependably Control Small Loads
Relays for Locations with Corrosive Gas or Excessive Dust
MYK Latching Relays
MY4Z Relays with Bifurcated ContactsMY4Z-CBG Relays with Bifurcated Crossbar Contacts
MYQ
MYQ Plastic Sealed RelaysMYH Hermetically Sealed Relays
MYH
Refer to the group catalog or your OMRON website for details.
Set coil
Reset coil
NO contacts
NC contacts
Operation Chart
Reliability Contact structure
Single contacts with Au plating
Bifurcated contacts with Au plating
Bifurcated crossbar contacts with Au cladingHigh
Corrosive gas DustDust
Easier to See, Easier to Use
Easily Accessible Information!
OMRON insists on inhouse production from component molds to manufacturing facilities to better meet your needs.
Contact Status at a Glance
Mechanical indicators are now a standard feature so that you know the contact operating status even for standard models.
Product Information at a GlanceThe model, specifications, and safety standards are all provided on the top surface.You can check this information while the Relay is mounted in the Socket.
Different Looks forDifferent SpecificationsTo prevent incorrectly using the Relays, we’ve made it easy to tell the difference between Relays with different specifications.
ON OFF
Standard Models
ON OFF
Models with Operation Indicators
The color of the operation indicator (LED)shows whether the coil voltage is AC or DC.
Relay withAC coil
Relay withDC coil
The voltage specification is also shown by the coil tape.
Relay withAC coil
Relay withDC coil
Safety standard marks
Safety standard-certified ratings
Coil specification
Model
Reliable Application!High Durability New Design
Stable Quality in Automatic ManufacturingWe took 50 years of manufacturing experience and designed market needs into design and production.
Two-pole Relay: 500,000 operationsFour-pole Relay: 200,000 operations
High Electrical DurabilityHelps reduce the maintenance frequency.
Note. For switching the rated load. Refer to the datasheet for details.
Ambient operating temperature: -55 to 70°C
Wide Ambient Operating TemperatureReliable application is possible for high-density mounting and in cold locations.
Malfunction shock resistance: 20G
High Shock ResistanceReduces malfunctions for unexpected external shocks.
Examples: Connection reliability was achieved with welding and one-piece molding while stable quality was achieved in automatic manufacturing.
Added a Series with a Latching Lever that is Useful for Operation Check of Relay Sequence Circuits
Note．According to the mechanism of the latching lever, the contacts are operated forcibly while the coil voltage is not being applied.
Normal State Mode 1: Momentary State Mode 2: Locked State
Operation Description －
When seen from the side
When seen from the top
Yellowbutton
Latching lever operating method
Slide the lever one step and press the yellow button with an insulated tool to operate the contacts.
If you slide the lever two steps, the contacts lock in the operation position.
There are reasons people continue to choose the MY Series.The MY Series provides a wide variety of models to ensure that we have just the right model for you.
Relays That Latch Contacts in the Operation Position
Relays That Dependably Control Small Loads
Relays for Locations with Corrosive Gas or Excessive Dust
MYK Latching Relays
MY4Z Relays with Bifurcated ContactsMY4Z-CBG Relays with Bifurcated Crossbar Contacts
MYQ
MYQ Plastic Sealed RelaysMYH Hermetically Sealed Relays
MYH
Refer to the group catalog or your OMRON website for details.
Set coil
Reset coil
NO contacts
NC contacts
Operation Chart
Reliability Contact structure
Single contacts with Au plating
Bifurcated contacts with Au plating
Bifurcated crossbar contacts with Au cladingHigh
Corrosive gas DustDust
Easier to See, Easier to Use
Easily Accessible Information!
OMRON insists on inhouse production from component molds to manufacturing facilities to better meet your needs.
Contact Status at a Glance
Mechanical indicators are now a standard feature so that you know the contact operating status even for standard models.
Product Information at a GlanceThe model, specifications, and safety standards are all provided on the top surface.You can check this information while the Relay is mounted in the Socket.
Different Looks forDifferent SpecificationsTo prevent incorrectly using the Relays, we’ve made it easy to tell the difference between Relays with different specifications.
ON OFF
Standard Models
ON OFF
Models with Operation Indicators
The color of the operation indicator (LED)shows whether the coil voltage is AC or DC.
Relay withAC coil
Relay withDC coil
The voltage specification is also shown by the coil tape.
Relay withAC coil
Relay withDC coil
Safety standard marks
Safety standard-certified ratings
Coil specification
Model
Reliable Application!High Durability New Design
Stable Quality in Automatic ManufacturingWe took 50 years of manufacturing experience and designed market needs into design and production.
Two-pole Relay: 500,000 operationsFour-pole Relay: 200,000 operations
High Electrical DurabilityHelps reduce the maintenance frequency.
Note. For switching the rated load. Refer to the datasheet for details.
Ambient operating temperature: -55 to 70°C
Wide Ambient Operating TemperatureReliable application is possible for high-density mounting and in cold locations.
Malfunction shock resistance: 20G
High Shock ResistanceReduces malfunctions for unexpected external shocks.
Examples: Connection reliability was achieved with welding and one-piece molding while stable quality was achieved in automatic manufacturing.
Added a Series with a Latching Lever that is Useful for Operation Check of Relay Sequence Circuits
Note．According to the mechanism of the latching lever, the contacts are operated forcibly while the coil voltage is not being applied.
Normal State Mode 1: Momentary State Mode 2: Locked State
Operation Description －
When seen from the side
When seen from the top
Yellowbutton
Latching lever operating method
Slide the lever one step and press the yellow button with an insulated tool to operate the contacts.
If you slide the lever two steps, the contacts lock in the operation position.
List of Models
Options (Order Separately)Connection Sockets and Hold-down Clips
Mounting
Terminal Type
Hold-down Clips
Front-mounting Sockets Back-mounting Sockets
PCB mountingDIN Track or screw mounting
Screw terminal Finger protection structure
PYF08A-E
PYF14A-E
PYC-A1 Socket combination PYC-P
PYF14A-N PYF-14-PU PY14-02
PYF08A-N PYF-08-PU PY08-02
Push-In Plus Terminal PCB terminals
Ordering Information
MY2N-D2-GS MY4N-D2-GS
MY2N-CR-GS MY4N-CR-GS
MY2-GS MY4-GS
MY2N-GS MY4N-GS
MY2IN-GS MY4IN-GS
MY2IN-D2-GS MY4IN-D2-GS
MY2IN-CR-GS MY4IN-CR-GS
Contact configuration 2C 4CRated voltage (V)
Models with built-in operation indicators having a latching lever
Models with built-in operation indicators having a latching lever, and diodes
Models with built-in operation indicators having a latching lever, and CR circuits
12 VDC, 24 VDC, 48 VDC, 100/110 VDC, 220 VDC
100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC
6 VDC, 12 VDC, 24 VDC, 48 VDC, 100/110 VDC, 220 VDC
12 VAC, 24 VAC, 48 VAC, 100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC
100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC
12 VDC, 24 VDC, 48 VDC, 100/110 VDC, 220 VDC
6 VDC, 12 VDC, 24 VDC, 48 VDC, 100/110 VDC, 220 VDC
12 VAC, 24 VAC, 48 VAC, 100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC
6 VDC, 12 VDC, 24 VDC, 48 VDC, 100/110 VDC
12 VAC, 24 VAC, 48 VAC, 100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC
MY2-GS
MY2N-GS
MY2N-D2-GS
MY2N-CR-GS
MY2IN-GS
MY2IN-D2-GS
MY2IN-CR-GS
MY4-GS
MY4N-GS
MY4N-D2-GS
MY4N-CR-GS
MY4IN-GS
MY4IN-D2-GS
MY4IN-CR-GS
Standard models
Models with built-inoperation indicators
Models with built-in operation indicators and diodes
Models with built-in operation indicators and CR circuits
Classification Model
Authorized Distributor:
In the interest of product improvement, specifications are subject to change without notice.
Cat. No. J196-E1-03 0318(0414)
© OMRON Corporation 2014-2018 All Rights Reserved.
OMRON Corporation Industrial Automation Company
Contact: www.ia.omron.com
Kyoto, JAPAN
OMRON ASIA PACIFIC PTE. LTD.No. 438A Alexandra Road # 05-05/08(Lobby 2),Alexandra Technopark, Singapore 119967Tel: 65-6835-3011/Fax: 65-6835-2711
OMRON (CHINA) CO., LTD.Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, ChinaTel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
OMRON TAIWAN ELECTRONICS INC.6F, Home Young Budg., No.363, Fu-Shing N.Road, Taipei, Taiwan R.O.CTel: (886) 2-2715-3331/Fax: (886) 2-2712-6712
048050007
テキストボックス
CSM_2_2_0318
