Mini Programming Instructions
2
This document and its content are property of EVS SA and Nestlé SA and shall not be reproduced without permission Document No: Revision: C Date: 28/04/08 Page 1/2 A1.RVS.MINI.0001.EN Programming instructions To manually program and modify settings on the machine the terminal MT2-A (red colour) is needed (A). 2 buttons are available at the backside of the terminal : 1 to enter/exit in the programming menu and the other 1 to perform some tests during adjustment of the machine settings (B). Shutdown the machine and insert the programming terminal in the little space on the right side of the selection key pad (C). Wait few seconds until the message “machine ready” appear on the LCD screen. To enter in the programming mode push the programming button on the terminal. Another message will be displayed (E). The navigation trough the menu is possible via the selection key pad of the machine, each button has got a different function (F). Button 1 Enter and go forward into the main menu Button 2 Enter and go forward into the sub menu Button 3 Enter and go backward in the sub menu Button 4 Increment the adjustable values Button 5 Decrement the adjustable values Button 6 Enter and go backward into the main menu To enter in the “PROG” menu, push the button 1 and navigate with the buttons 1, 3 and 6. To exit, go back to the main menu and push the programming button at the back of the terminal MT2-A (all details of the programming menu are explained on page 2). A message “END PROGRAMMING” will be displayed, then wait for “Machine ready”. Then the machine is operational. Remove the MT2-A from the machine. 1) 2) 3) 4) 5) 6) 7) 8) Model Mini Manufacturer Rheavendors Scope Programming with MT2A ter- minal 1 2 3 4 5 6 A B C D E F
description
rheavendors mini programing instruction
Transcript of Mini Programming Instructions
This document and its content are property of EVS SA and Nestlé SA and shall not be reproduced without permission
Document No: Revision: C Date: 28/04/08 Page 1/2A1.RVS.MINI.0001.EN
Programming instructions
To manually program and modify settings on the machine the terminal MT2-A (red colour) is needed (A).
2 buttons are available at the backside of the terminal : 1 to enter/exit in the programming menu and the other 1 to perform some tests during adjustment of the machine settings (B).
Shutdown the machine and insert the programming terminal in the little space on the right side of the selection key pad (C).
Wait few seconds until the message “machine ready” appear on the LCD screen.
To enter in the programming mode push the programming button on the terminal. Another message will be displayed (E).
The navigation trough the menu is possible via the selection key pad of the machine, each button has got a different function (F). Button 1 Enter and go forward into the main menuButton 2 Enter and go forward into the sub menuButton 3 Enter and go backward in the sub menuButton 4 Increment the adjustable valuesButton 5 Decrement the adjustable valuesButton 6 Enter and go backward into the main menu
To enter in the “PROG” menu, push the button 1 and navigate with the buttons 1, 3 and 6. To exit, go back to the main menu and push the programming button at the back of the terminal MT2-A (all details of the programming menu are explained on page 2). A message “END PROGRAMMING” will be displayed, then wait for “Machine ready”. Then the machine is operational.
Remove the MT2-A from the machine.
1)
2)
3)
4)
5)
6)
7)
8)
Model MiniManufacturer Rheavendors
ScopeProgramming with MT2A ter-minal
1 2 3 4 5 6
A
B
C
D
E
F
This document and its content are property of EVS SA and Nestlé SA and shall not be reproduced without permission
Document No: Revision: B Date: 05/03/07
Table top / Mini / Dispenser Target: User Topic: Basic handling
Page 2/2A1.RVS.MINI.0001.EN
Programming instructionsSummary of main menus.
To set up recipes for the selections 1 to 6.
To adjust prices of selections 1 to 6.
To configure the price line for parallel payment system (line 1 to 6).
To adjust the boiler water temperature (in °C).
Adjustable parameters :Extraction fan timerAccess codePayment system protocolPump speedMotor speedBeeper timer
⊳
⊳
⊳
⊳
⊳
⊳
Real time Visualization of the 24V power supply and boiler temperature.
Sub menus :Total selections counterPartial selections counterTotal creditTotal number of selections made for each drinks (1 to 6)
⊳
⊳
⊳
⊳
Adjustable settings :Date / timeMachine start-up timeMachine standby time
⊳
⊳
⊳
Alarm historic (20 messages maximum).
Estimated time of product consumption (in seconds) for each products. This is used to activate an alarm is the product quantity is getting to low in the canisters
