MINERVA MX-4000 MX-1000 THORN

Safety Products

1 12 2005/8/19

EN54 Part 2EN54 Part 4

LPCB Ref. NO. 143

The MINERVA MX panels are intelligent LPCB EN54 approved* panels, which can be networked to provide up to 396 detection loops and installed to BS5839:Pt.1 The MX1000 supports one MX DIGITAL

detection loop with up to 250 addressable devices.

The MX4000 supports two MX DIGITAL detection loops and can be expanded to four loops supporting up to 1000 addressable devices.

Both panels consist of a strong steel enclosure incorporating a removable chassis plate. The chassis plate holds: PSB800 5A 24Vd.c. battery backed power supply

and loop booster to EN54:pt.4 FIM800 field interface PCB incorporating one or

two MX DIGITAL loops CPU800 32 bit processor and memory card Optional network card, additional loop card (s)

and remote diagnostic modem Optional IOB800 input/output expansion card

mounted on the PSB800 The panel has a strong cast aluminium front door, which incorporates a modular user interface that fully complies with EN54:pt.2. The user interface incorporates the ODM800 operator display module with a 16 x 40-character backlit LCD display, simple alphanumeric keypad, 5 softkeys and a fast access key. The OCM800 operator control module provides all mandatory operator control keys and LED functions including Day/Night switching. Two control keys and 2 indication LEDs are provided for site-specific functions.

Control keys and LEDs are labelled in English according to the default LPCB functionality. The slide in decals can be reversed and alternative text added. Product Codes Standard Panels 557.200.001 MX1000 Single Loop Panel Shallow Back Box 557.200.002 MX1000 Single loop panel - Flush Back Box 557.200.003 MX4000 Two to Four Loop Panel Shallow Back Box557.200.004 MX4000 Two to Four Loop Panel Deep Back Box 557.200.009 MX4000 Two to Four Loop Panel - Flush Back Box Options 557.202.006 IOB-800 (8in/8out) expansion board (Max. 24 I/O on main panel) 557.202.007 XLM-MX two loop MX DIGITAL expansion card 557.202.026 TLI-800 ThornNet & MX-NET network card 557.202.036 Remote Diagnostic Modem 557.202.116 Modem Lead 557.202.118 MX CONSYS download lead

2 12 2005/8/19

MODULE/BOARD DESCRIPTIONS

NETWORK (MX-Net or FILNet)

COM 1 RS232 PRINTER

COM 2 RS232 CONFIGURATION PC/ MODEM

EXPANSION I/O BUS (IOB800s/TUD800)FAULT RELAY ALARM RELAY

ADDRESSABLE DEVICE CIRCUITS x 2~4

SOUNDER OUTPUTS x 2

UNSUPERVISED INPUT SUPERVISED INPUT

EMERGENCY ALARM I/P OPTIONAL 2nd PSB820 SUPPLY FOR XLM

REPEATERSMPM800 TO DRIVE

20-WAY STATUS COMMAND MODULE 40-WAY ALARM/FAULT LED MODULE

80-WAY ALARM LED MODULE XIOM800 16 I/O (UP TO 5 PER MPM800)

MIMIC PANELS IOB800 8IN / 8OUT

SERIAL/PARALLEL PRINTERS

3 12 2005/8/19

TYCO/THORN

MX-4000/1000

4 12 2005/8/19

5 12 2005/8/19

4.4.4.7 SERIAL PORTS

The FIM has 3 RS232 serial ports which are used for

communicating with the following:

COM1 - Serial printer.

COM2 - Configuration PC/Modem.

COM3 - ThornNet and FILNet

communications networks.

4.4.4.8 REMOTE BUS

This is an RS485 party-line asynchronous bus (maximum

length 1200m), driven by the FIM. As this bus can address

up to 16 peripherals, the unique address of any MPM on

the

bus must be set using a DIP switch.

Note: The maximum number of RBUS devices is limited by design considerations ie, MPM personality. The RBUS must be terminated with a 150 resistor at the

FIM and a 120 resistor at the last device on the RBUS.

4.4.4.9 I/O BUS

The I/O bus can drive up to 2 IOB800 Standard

8IN/8OUT

Expansion boards (see Section 4.5.2). The bus is a 1-bit

bidirectional

bus which is capable of addressing up to 24 I/O

devices. It may be used to drive up to 16 off-board LEDs,

relays, etc. and to read up to 8 auxiliary inputs.

Note: The maximum length of the Expansion Bus cable is 2 metres from the MPM: i) To any other board, or,

ii) where boards are daisy chained together

the total combined cable lengths.

4.4.4.10 CONNECTORS:

PL2: Power

PL3: Network power

PL4: Expansion I/O

PL5: Loop power

PL6: COM1 serial connector

PL8: COM2 serial connector

PL10: COM3 serial connector

PL12: Not fitted

PL9: Loop Expansion

PL11: Not fitted

PL13: OCM800

PL14: CPU interface

PL15: OCM800 (normally used in rack mounting)

H1: A Loop

H2: B Loop

H3: Sounder 1 and Sounder 2 outputs

H4: Supervised input

H5: Unsupervised input

H6: Emergency alarm input

H7: Fault relay

H8: Alarm relay

H9: Remote Bus

H10: Factory test

H11: Factory test

Headers

JP1: OFF - Ground Fault link OFF

ON - Ground Fault link ON

JP7: OFF - Emergency Alarm, fire LEDs ON,

has no effect on sounders

ON - Emergency Alarm fire LEDs ON, will

turn on sounders

JP11: Factory test

JP12: Factory test

JP10: Factory test

SOUNDER OPERATION NORMAL CLASS A

JP6 Not fitted Fitted

JP5 Fitted Not fitted

JP4 Fitted Not fitted

JP3 Not fitted Fitted

JP2 Not fitted Fitted

JP8: Only fitted for Class A to double output

current

JP9: Only fitted for Class A to double output

current

Class A no EOLs fitted.

SDR1 +ve return connected to SDR2 +ve.

SDR1 -ve return connected to SDR2 -ve.

In the event of a single open circuit, SDR2 only is active

and

drives both SDR1 +ve output and SDR2 +ve output. The

output current is doubled when header links JP8 and JP9

are

fitted.

4.4.5 OPERATOR CONTROL MODULE

The Operator Control Module (OCM) is used to provide:

LED indication of System, Panel, Sounder,

Hardware and Signalling status.

Pushbutton switches to provide control

functions.

MX 4000/1000 Housing (Shallow) Dimensions

6 12 2005/8/19

MINERVA MX-4000 MX-1000 THORN

Safety Products

7 12 2005/8/19

EN54 Part 2EN54 Part 4

LPCB Ref.NO. 143

MX LPCB EN54

396

BS5839:Pt.1

MX1000 1 MX250

MX40002MX44*250

PSB800 5A 24Vd.c.

FIM800 /12MX

CPU800 32 IOB800PSB800

EN54:pt.2 ODM80016 x 40LCD5 OCM 800

LED/

2 2 LED

s 557.200.001 MX1000 557.200.002 MX1000 557.200.003 MX4000 2~4 557.200.004 MX4000 2~4 557.200.009 MX4000 2~4 557.202.006 IOB-800 (8/8) (Max. 24 I/O

)

557.202.007 XLM-800 2 MX 557.202.026 TLI-800 ThornNet & MX-NET 557.202.036 557.202.116 557.202.118 MX CONSYS

DET

D

ET*

IB

C

P

D

IM

R

IM

C

IM

LI

800

DET

*

1.

250

2.

LED

#

1

#

2

24V

8 12 2005/8/19

(MX-Net or FILNet)

COM 1 RS232

COM 2 RS232

/ (IOB800s/TUD800)

x 2~4

x 2

PSB820

MPM800

20 40/ LED

80 LED XIOM800 16 I/O

MIMIC PANELS IOB800 8IN / 8OUT

PRINTERS

9 12 2005/8/19

TYCO/THORN

MX-4000/1000

10 12 2005/8/19

11 12 2005/8/19

4.4.4.7

FIM3 RS232

COM1 --

COM2 COM3 --ThornNetFILNet

4.4.4.8BUS

RS485 (

1200)FIM

16

MPM

RBUS ie

MPM

RBUS150

FIM120RBUS

4.4.4.9BUS

2 IOB800

8IN/8OUT ( 4.5.2 ) 1

24 I/O

16 LED,

8

MPM

2 :

4.4.4.10

PL2

PL3 TLI800

PL4

PL5

PL6 COM1

PL8 COM2 PC/

PL10 COM3

PL12

PL9 XLM800

PL11

PL13 OCM800

PL14 CPU

PL15 OCM800 ()

H1 A

H2 B

H3 12TOTAL2A

2.7K

H4 10K

H5

H6

H7 24V2A

H8 24V2A

H9 BUS(1200) H10

H11

JP1 OFF--

ON--

JP7 OFF--LED

ON--LED

JP11

JP12

JP10

Class A

JP6

JP5

JP4

JP3

JP2

JP8 A

JP9 A Class A

SDR1+ ve SDR2+ve

SDR1- ve SDR2-ve

SDR2

SDR1 +veSDR2 +ve

JP8JP9

MX 4000/1000 () 32 44 17

12 12 2005/8/19