MILTON CAT - Construction Equipment...
1
Equip Sales & Leasing 30 Bernhard Road, Suite 1 • North Haven, CT 06473 Email: [email protected] Rockster Headquarters: 551 Anderson Ave. Hammonton, NJ 08037 Email: [email protected] The NEW 1100DS Track Mounted Impact Crusher MILTON CAT www.miltoncat.com Contractor and recycling customers in ME, RI, VT, NH, MA and state of NY , excluding New York City and surrounding counties 100 Quarry Drive Milford, MA 01757 508-634-3400 14 Kendrick Road Wareham Industrial Park Wareham, MA 02571 508-291-1200 84 Concord Street North Reading, MA 01864 978-276-2400 2158 Plaineld Pike Commerce Park W #10 Cranston, RI 02920 401-946-6350 Route 2, One Cat Lane Richmond, VT 05477 802-434-4228 30 Industrial Drive Londonderry, NH 03053 603-665-4500 16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586 79 Robertson Blvd. Brewer, ME 04412 207-989-1890 500 Commerce Drive Clifton Park, NY 12065 518-877-8000 294 Ainsley Drive Syracuse, NY 13210 315-476-9981 55 Industrial Park Drive Binghamton, NY 13904 607-772-6500 4610 E. Saile Drive Batavia, NY 14020 585-815-6200 H.O. PENN MACHINERY CO., INC. www.hopenn.com Contractor and recycling customers in lower thirteen counties of NY state, and in the state of CT 122 Noxon Road Poughkeepsie, NY 12603 845-452-1200 699 Brush Avenue Bronx, NY 10465 718-863-3800 783 Bloomingburg Road Bloomingburg, NY 12721 845-733-6400 660 Union Avenue Holtsville, NY 11742 631-758-7500 225 Richard Street Newington, CT 06111 860-666-8401 Contact our Aggregate Specialists In CT call Scott Gilligan 860-461-6534 In NY state call Kevin Kretschmer 646-315-2284 Page 82 • October 19, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide Fecon Inc.’s SH280 Stump Hog stump grinder for the com- pany’s FTX128 track carrier brings big performance and robust construction to the job when powered by the 60-gpm/4,600-psi high flow of the FTX128. The SH280 delivers impressive torque and wheel speed of 1,000 rpm through a large displace- ment direct drive 227cc hydraulic motor and the large 28.75 in. (73 cm) diameter wheel is swept from side to side with the ergonomic control of the FTX128 joystick. The dedicated aux- iliary low flow of the tractor powers the sweep function so no performance is taken from the high flow power to the wheel, according to the manufacturer. This powerful combination enables operators to be more productive, moving quickly from stump to stump in the quiet and comfortable enclosed FTX128 cab. Working from the enclosed cab also means working comfortably in the ambient heat or cold, or when rain might otherwise stop work entirely. The SH280 stump hog is a complementary extension to the growing number of approved attachments that make FTX128 owners more versatile. The SH280 is a high performance solu- tion for stumps after mulching with Fecon’s BH85SD-4 mulching attachment or felling trees with the company’s FBSD1500 bunching shear. For more information, call 800/528-3113 or visit www.fecon.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) SH280 Stump Hog for Fecon’s FTX128 Boasts Impressive Torque, Wheel Speed Fecon Inc.’s SH280 Stump Hog stump grinder deliv- ers impressive torque and wheel speed of 1,000 rpm through a large displacement direct drive 227cc hydraulic motor and the large 28.75 in. (73 cm) diameter wheel is swept from side to side with the ergonomic control of the FTX128 joystick.
Transcript of MILTON CAT - Construction Equipment...
-
Equip Sales & Leasing30 Bernhard Road, Suite 1 • North Haven, CT 06473
���������������������������������Email: [email protected]
Rockster Headquarters:551 Anderson Ave. Hammonton, NJ 08037����������������������������������
Email: [email protected]
�������������������������������������������������The NEW 1100DS Track Mounted Impact Crusher
MILTON CAT
www.miltoncat.comContractor and recycling customers in ME, RI, VT, NH, MA and state
of NY , excluding New York City and surrounding counties
100 Quarry DriveMilford, MA 01757
508-634-340014 Kendrick Road
Wareham Industrial ParkWareham, MA 02571
508-291-1200
84 Concord Street North Reading, MA 01864
978-276-2400 2158 Plain�eld Pike
Commerce Park W #10Cranston, RI 02920
401-946-6350
Route 2, One Cat Lane Richmond, VT 05477
802-434-4228
30 Industrial Drive Londonderry, NH 03053
603-665-4500
16 Pleasant Hill RoadScarborough, ME 04070
207-883-9586
79 Robertson Blvd.Brewer, ME 04412
207-989-1890
500 Commerce DriveClifton Park, NY 12065
518-877-8000
294 Ainsley DriveSyracuse, NY 13210
315-476-9981
55 Industrial Park DriveBinghamton, NY 13904
607-772-6500
4610 E. Saile DriveBatavia, NY 14020
585-815-6200
H.O. PENN MACHINERY CO., INC.
www.hopenn.comContractor and recycling customers in lower thirteen counties of
NY state, and in the state of CT
122 Noxon Road Poughkeepsie, NY 12603
845-452-1200
699 Brush Avenue Bronx, NY 10465 718-863-3800
783 Bloomingburg Road Bloomingburg, NY 12721
845-733-6400
660 Union Avenue Holtsville, NY 11742
631-758-7500
225 Richard StreetNewington, CT 06111
860-666-8401
Contact our Aggregate SpecialistsIn CT call Scott Gilligan 860-461-6534
In NY state call Kevin Kretschmer 646-315-2284
Page 82 • October 19, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Fecon Inc.’s SH280 Stump Hog stump grinder for the com-pany’s FTX128 track carrier brings big performance and robustconstruction to the job when powered by the 60-gpm/4,600-psihigh flow of the FTX128. The SH280 delivers impressivetorque and wheel speed of 1,000 rpm through a large displace-ment direct drive 227cc hydraulic motor and the large 28.75 in.(73 cm) diameter wheel is swept from side to side with theergonomic control of the FTX128 joystick. The dedicated aux-iliary low flow of the tractor powers the sweep function so noperformance is taken from the high flow power to the wheel,according to the manufacturer. This powerful combination enables operators to be more
productive, moving quickly from stump to stump in the quietand comfortable enclosed FTX128 cab. Working from theenclosed cab also means working comfortably in the ambientheat or cold, or when rain might otherwise stop work entirely. The SH280 stump hog is a complementary extension to the
growing number of approved attachments that make FTX128owners more versatile. The SH280 is a high performance solu-tion for stumps after mulching with Fecon’s BH85SD-4mulching attachment or felling trees with the company’sFBSD1500 bunching shear.For more information, call 800/528-3113 or visit
www.fecon.com.(This story also can be found on Construction Equipment
Guide’s website at www.constructionequipmentguide.com.)
SH280 Stump Hog for Fecon’s FTX128Boasts Impressive Torque, Wheel Speed
Fecon Inc.’s SH280 Stump Hog stump grinder deliv-ers impressive torque and wheel speed of 1,000 rpmthrough a large displacement direct drive 227cchydraulic motor and the large 28.75 in. (73 cm)diameter wheel is swept from side to side with theergonomic control of the FTX128 joystick.
