Milled enclosures

Enclosures for Electronics,RF- and Microwave Technologies

History

1980 MTS Mikro-technik has been founded as a development andmanufacturing company

1995 Changing fromMTS Mikrotechnik inMTS Systemtechnik tofollow the changeddemands on the market

Main products

Signal distribution-systems for audio,video, RF and microwave, used fortelecommunication,radio monitoring, satellite communication

Development and pro-duction of active andpassive components forrf- technology

Manufacturing ofmech. components foraviation, for aerospaceindustry, RF-techn. aswell as for optical industry

Competence

Own design and production of RF-comp. and -systems

RF-development and -simulation laboratory

Big CNC-productioncenter

Soft- and hardwarelaboraty

CAD construction service

Modern production-methods like CAM

About us

Gewerbepark Ost 8D-86690 MertingenGermanyPhone +49(0) 9078 / 91294-0 Fax +49(0) 9078 / [email protected]

Systemtechnik

Certified with DIN ISO 9001:2000

RF-systems and -units

Data technology

Mechanical products

CopyrightTechnical subject to change.Illustrations similar.

Today notable companies of the electronic industry all over europebelong to our customers:

ALCATEL, Arpege Défense, AUDI, Bosch Telecom, CERN, Danet, DB Telematik, DESY, DLR,EADS, Ericsson, ESA, Eurocopter, Infineon, Leica, Lucent Technologie, ND SatCom, PTB,Rohde & Schwarz, Serco, SIEMENS, Thomson, T-Mobile, Vodafone

www.mts-systemtechnik.de2

AG/AGO Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

UC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

TC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

ZG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

RG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

EH Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

G Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

PGS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

KG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

FK Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

EG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

GRS/GRA Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

EGD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

EB Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Front/Rear and Dummy Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

F and TF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Milling Center / Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Overview devices and systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Overview components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Table of contents

Milling Enclosures – RF-Enclosures4

AG/AGO series

The RF-enclosures of AG and AGO seriesare precision enclosures milled out of afull aluminum block. Their characteristic isa circuit board mounted with clampingscrews, so drillings are not necessary inthe circuit board. These enclosures arelocked with multiple bolted, 2 mm strongcovers, which are alternatively flush lok-ked or have a mounting flange exceeding10 mm on each side.

DimensionsThe enclosures of AG/AGO series are available in four different sizes, heightand width remain always the same andonly the length will change (please notethe drawing on page 6).

Content of deliveryThe enclosures are delivered according tothe defined order version, including allnecessary accessories. (enclosures withcover/bottom, screws for the cover-/bot-tom-and circuit board mounting as well asaccessories manufactured.)

ServiceWe do modificate enclosures, accordingto customer specifications, e.g. drill-holepattern and modified dimensions.

Application domainAmplifiers (modules), oscillators, attenuator, etc.

Type 3With standard drill hole-pattern, RF-con-nectors, optional with fastening as well asone ground connector and one feedthrough filter DF2

Type 2without mounting hole

Versions

Type 1With standard mounting hole-pattern (inopposite of the UC-series only for onefeed through filter DF2)

Milled enclosures – RF-enclosures 5

Dimensions of covers and bottom plates (in mm)

M2,5

M3 mounting holes for flange mount jacks

Circuit board clamp

bottom plate

circuit board

Structure and difference

AG seriesThe circuit board is only accessible fromone side after mounting.

M3 mounting holes for flange mount jacks

Circuit board clamp

bottom plate

circuit board

M2,5

M2,5Cover plate

AGO(pen) seriesThe circuit board is accessible from bothsides after mounting.

Dimensions of cover plates and bottom plates in mm

Enclosures bottom plate covertype L x B x H l b type L x B x H

AG 1 B1 62 51 2 52 40 C1* 41,8 51 2

AG 2 B2 94 51 2 84 40 C2* 74,0 51 2

AG 3 B3 125,5 51 2 115,5 40 C3* 105,5 51 2

AG 4 B4 157 51 2 147 40 C4* 137,0 51 2

AGO 1 B1 62 51 2 52 40 C1 41,8 51 2

AGO 2 B2 94 51 2 84 40 C2 74,0 51 2

AGO 3 B3 125,5 51 2 115,5 40 C3 105,5 51 2

AGO 4 B4 157 51 2 147 40 C4 137,0 51 2

Configuration of model designation

AGO 2 - 1 - CB - 5 4 - C N

surface protectionR = raw N = chemically nickel-plated 8 – 10µ

Surface pretreatmentT = vibratory finishing C = matt finish(see technical information)

RF-ports, female 0 = BNC 4 = SMA2 = TNC 8 = N

Impedance5 = 50 Ω (7 = 75 Ω on request)

Cover/bottom combination (designate only with one letter)C = cover (flush)bottom (with overstanding flange and mounting holes)

Design

Size

Type of enclosure

Milled enclosures -Dimensions6

Dimensions, AG/AGO series

All dimensions in mm

AG/AGO1

AG/AGO2

AG/AGO3

AG/AGO4

77Milled enclosures – RF-enclosures

UC-series

The RF-enclosures of UC series are preci-sion enclosures milled out of a full alumi-num block. The circuit board is screwedonto a circulating assembly web, so drillholes on the circuit board are not necessa-ry. The enclosures are locked with multi-ple bolted, 2 mm strong covers, which canbe choosed as flush locked or as a moun-ting flange exceeding 10 mm on eachside.

The enclosures of UC-series are availablein four different sizes, whereby heightand width remain always the same, onlythe length will change (please note thefollowing drawings).

Content of delivery According to the defined order versions, theenclosures are delivered with all necessary accessories (enclosures with cover/bottom, screwsfor the cover-/bottom-and circuit board mounting,as well as accessories according to the design.)

ServiceWe do modificate enclosures, according to customer specifications, e.g. drill-hole pattern andmodified dimensions.

Application noteFor example amplifiers (modules), oscillator, attenuators etc. Version 3

With standard drill hole-pattern, 2 RF-connectors,optional with fastening as well as a ground con-nector and one feed through filter DF2

Version 1With standard drill hole-pattern (in opposite ofthe AG/AGO-series for 2 feed through filters DF2).

Version 2 Without mounting holes

Versions


UC2 - 1- CB - 5 4 - C N surface protectionR = rawA = yellow alodynedN = chemical nickel-

plated

surface pretreatmentT = vibratory finishingC = matt finish (see technical informa-tion)

RF- Ports0 = BNC2 = TNC4 = SMA8 = N

Impedance5 = 50 Ω(7 on request)

Cover/bottom combina-tion ( designate onlywith one letter)C = cover (flush)B = bottom (with over

standing flange and mounting holes)

Design

Type and size

88

Standard design

Model La Li Ba Bi H

UC1 41,8 31,8 48 38 33

UC2 73,5 63,5 48 38 33

UC4 137,0 127,0 48 38 33

UC6 200,7 190,7 48 38 33

Dimensions in mm


Dimensions, UC series

99Milled enclosures – RF-enclosures

TC-series

The rf-/microwave enclosures are desi-gned to built-in TO-8 devices, to insuresufficient heat transfer and ground connection to each module. Theboards can be mounted in close contactto TO-type enclosures.

MaterialAluminum base alloy

DesignWith exceeding 3mm-bottom plate. Com-pleted with all drill holes for mountingbottom plate, flange mount jacks, forfeed through filters and ground connec-tors.

Content of delivery Enclosures with bottom plate, mountingmaterial , 2 RF-jacks, 1 ground connector,1 feed through filter, 1 blind plug UNEF12-32 and M1,4 screws (circuit boardmounting).


TC2 - TA - 5 4

RF-ports female0 = BNC2 = TNC4 = SMA8 = N

5 = 50 Ω7 = 75 Ω

Standard surface TR, TA, CN

Size

Standard design

Model La Li Ba Bi H I

TC2 35 29 25,4 19,4 21 25

TC4 61 55 25,4 19,4 21 51

TC5 74 68 25,4 19,4 21 64

Dimensions in mm

1010 Milled enclosures

Dimensions, TC series

Dimensions in mm

Circuit board mountingTC2

TC4

TC5

1111Milled enclosures – RF-Hybrid enclosures

The ZG aluminum enclosures are designedto built-in RF/microwave hybrid-thinfilm-and stripline-circuits. The ZG-series represent an ideal enclosurefor RF hybrid circuits and LSI applications.All inside dimensions are in inch.

MaterialAluminum base alloy

Content of deliveryEnclosures with inlay cover and themounting screws M2.

Enclosures with inlay cover and the mountingscrews M2.


ZG 1 - 2 - TRSurfaceTR = vibratory finishingTA = yellow alodynedCN = nickel-plated(see technical information)

2 = screwed inlay cover

Enclosure 1, 2, 3, 4

ZG series

ZG-series

Dimensions, ZG series

Basic design ZG1-2 ZG2-2 ZG3-2 ZG4-2

Dimensions

Outside (mm) 33,6 x 53,6 x 20* 33,6 x 79 x 20* 59 x 79 x 20* 59 x 129,8 x 20*

Circuit board 1" x 1" 1" x 2" 2" x 2" 2" x 4"

* Other dimensions on request!

Side view

ZG1-2

ZG2-2

ZG3-2 ZG4-2


Dimension, ZG series

1212 Milled enclosures – solid lightweight enclosures

RG series

Low weight enclosures milled out of a fullaluminum block with rounded edges. Ide-al for batteries or portable power supply.The RG series is used in the medical indu-stry also.

Material Enclosures

Aluminum base alloy

Cover Aluminum base alloy

Option (on request) Material Surface (colored anodize) Treatment and colored anodizing as

desired Other dimensions are possible

Content of deliveryEnclosures include cover and screws

Standard design

Design dimensions (mm)La Li Ba Bi Ha Hi

RG1 39 35 39 35 19 15

RG2 49 45 49 45 19 15

RG3 59 55 59 55 19 15

RG4 79 75 79 75 19 15

RG5 99 95 99 95 19 15

RG6 49 45 39 35 19 15

RG7 59 55 39 35 19 15

RG8 79 75 39 35 19 15

RG9 99 95 39 35 19 15

RG10 59 55 49 45 19 15

RG11 79 75 49 45 19 15

RG12 99 95 49 45 19 15

RG13 99 95 79 75 19 15


RG6 - TRSurfaceTR, TA, TN, TE + color (see technical information)

Model

Dimensions, RG series

Dimensions in mm

1313Experimental enclosures

The enclosures are manufactured out ofan aluminum tube and are closed at theends with flat screws mounted covers onboth sides.Especially, they are suitable for buildingup attenuators or similar passive elements.

Enclosures Aluminum base alloy

CoverAluminum base alloy2 mm thick, mounted with screwsM2x6

Content of deliveryEnclosures with two flat coversincluding mounting material and RF-connectors.

EH series

EH1

Exampel 1

Exampel 2

Exampel 3

Exampel 4

RF-different connecting interfaces, EHseries


EH1 - 1 - TR - 1A Combination of connec-tors and their position

SurfaceTR = rawCN = nickel plated

Versions1 = without ground pin2 = with ground pin

Enclosures

Dimensions, EH series

EH3


Enclosure Dimensions (mm)La Ba Ha

EH1 40 30 30

EH2 50 20 20

EH3 60 40 30

EH2

BNC female: 0 = 50 Ω, M = 75 ΩBNC male: 1 = 50 Ω, N = 75 ΩTNC female: 2 = 50 Ω, P = 75 ΩTNC male: 3 = 50 Ω, R = 75 ΩSMA female: 4 = 50 Ω1.6/5.6 female: 6 = 75 Ω1.6/5.6 male: 7 = 75 ΩN female: 8 = 50 Ω, S = 75 ΩN male: 9 = 50 Ω, T = 75 ΩSMB female: A = 50 ΩSMC female: C = 50 Ω

1414 Profile enclosures

G series

With the G series, you have the opportu-nity, to order enclosures of the SG, SB,PGS and TG series in various heights. Wewill deliver these enclosures short-termand in small number of pieces.

Combination of cover and bottomOur large selection gives you the possibili-ty to choose your own special enclosure.

30 x 40 mm

40 x 30 mm

40 x 40 mm

40 x 50 mm

40 x 60 mm

40 x 80 mm

40 x 100 mm

40 x 120 mm

40 x 150 mm

40 x 180 mm

50 x 40 mm

50 x 50 mm

50 x 60 mm

50 x 80 mm

50 x 100 mm

50 x 120 mm

50 x 150 mm

50 x 180 mm

50 x 200 mm

60 x 60 mm

60 x 80 mm

60 x 100 mm

60 x 120 mm

60 x 140 mm

80 x 80 mm

80 x 100 mm

80 x 140 mm

80 x 150 mm

80 x 160 mm

80 x 200 mm

80 x 220 mm

100 x 100 mm

100 x 150 mm

100 x 200 mm


G 1 2 - 80 - 60 - 45 - TRStandard surfaceTR, TA, CN (see technical Infor-mation)

Height H

Length La

Width Ba

Bottom

Cover

Design

Dimensions in mm

Available tube profiles

Ba x La Ba x La

Type 0Enclosures withoutmounting drill holes,cover and bottom plate

Type 53 mm thick screwedprofile cover or bot-tom plate

Do you desire a large amount of mounting screws or do you need other positions? Please call us!

Type 12 mm thick screwedcover and bottom plate.

Type 2Inlay cover and bottomplate

Preferred type 3Inlay screwed cover andbottom plate

Preferred type 43 mm thick profilecover or bottom plate

Type 92mm thick flat cover orbottom plate.

Type 8Screwed exceeding3mm thick profile coveror bottom plate withmounting holes (Ø 3,2mm)

Preferred type 73mm thick exceedingprofile cover or bot-tom plate

Preferred type 6Screw mounted, flatexceeding bottom pla-te (2 mm thick) withmounting holes (Ø 3,2mm)

Dimensions, G series

Cover and bottom plate versions

1515151515Profile 15

P 40

Precision profilesMaterial: aluminum base alloy Tolerance after DIN 17615

Cover profiles P 40 – P 100Like the SG, SB, TG and G series

Side-piece profiles SP 1 – SP 4Like KG, KGT, EG and EGD series

P 50

P 60

P 80

SP 1

SP 2

SP 3

SP 4

Dimensions in mm

P 100

Dimensions of structure

Side-piece profiles SP 1 – SP4

Cover structure P 40 – P 100

Profiles 15

Profiles


All enclosures of PGS series are equippedwith a flat bottom plate and an inlaycover, which get screwed in the enclosu-res. The PGS series are suitable to built-inrf-components, hybrid circuits and allkinds of small components. PGS enclosures are very sturdy and exten-sively RF shielded. Enclosures, covers andbottom plates are made out of aluminum.All of our enclosures of the PGS serieshave the same height of 22 mm.If other heights are needed, see the Gseries.

PGS series

Technical data and information for ordering

Design dimensions (mm)Ba La L l

PGS40-30-22-TR 40 30 50 40

PGS40-40-22-TR 40 40 60 50

PGS40-50-22-TR 40 50 70 60

PGS40-60-22-TR 40 60 80 70

PGS40-80-22-TR 40 80 100 90

PGS40-100-22-TR 40 100 120 110

PGS40-120-22-TR 40 120 140 130

PGS40-150-22-TR 40 150 170 160

PGS40-180-22-TR 40 180 200 190

PGS50-40-22-TR 50 40 60 50

PGS50-50-22-TR 50 50 70 60

PGS50-60-22-TR 50 60 80 70

PGS50-80-22-TR 50 80 100 90

PGS50-100-22-TR 50 100 120 110

PGS50-120-22-TR 50 120 140 130

PGS50-150-22-TR 50 150 170 160

PGS50-180-22-TR 50 180 200 190

PGS50-200-22-TR 50 200 220 210

PGS60-60-22-TR 60 60 80 70

PGS60-80-22-TR 60 80 100 90

PGS60-100-22-TR 60 100 120 110

PGS60-140-22-TR 60 140 160 150

PGS80-60-22-TR 80 60 80 70

PGS80-80-22-TR 80 80 100 90

PGS80-100-22-TR 80 100 120 110

PGS80-140-22-TR 80 140 160 150

PGS80-150-22-TR 80 150 170 160

PGS80-160-22-TR 80 160 180 170

PGS80-200-22-TR 80 200 220 210

PGS80-220-22-TR 80 220 240 230

PGS100-100-22-TR 100 100 120 110

PGS100-150-22-TR 100 150 170 160

PGS100-200-22-TR 100 200 220 210

Construction of model designation

PGS 80 - 60 - 22 - TR

= 2

2

Principle construction

Standard surface TR, TA, CN(see technical informa-tion)

Height H

Lenght La

Width Ba

Design

1717Profile enclosures 17171717171717171717

Series SG80-…

Series SG100-…

Dimensions in mm

Dimensions of enclosures with profilebottom plates and covers, SG series

The corpus of the enclosures are madeout of a square pipe. The enclosures areclosed with profile covers (see chapter“profiles”). These are designed once as flush lockedcovers and once as exceeding bottoms,like a mounting flange. Especially theyare suitable for mounting powers sup-plies, control devices, switches or similarcomponents. The profile webs in the bot-tom plate can be used as support.If other dimensions are desired, please seethe G-series.

Principle construction

SG series

Technical details and information of ordering

Design dimensions (mm)Ba La L H

SG80-60-45-TR 80 60 80 45

SG80-80-45-TR 80 80 100 45

SG80-80-65-TR 80 80 100 65

SG80-100-45-TR 80 100 120 45

SG80-100-65-TR 80 100 120 65

SG80-140-40-TR 80 140 160 40

SG80-140-45-TR 80 140 160 45

SG80-140-50-TR 80 140 160 50

SG80-140-73-TR 80 140 160 73

SG80-150-40-TR 80 150 170 40

SG80-150-45-TR 80 150 170 45

SG80-150-50-TR 80 150 170 50

SG80-150-73-TR 80 150 170 73

SG80-160-40-TR 80 160 180 40

SG80-160-45-TR 80 160 180 45

SG80-160-50-TR 80 160 180 50

SG80-160-73-TR 80 160 180 73

SG80-200-40-TR 80 200 220 40

SG80-200-56-TR 80 200 220 56

SG80-200-86-TR 80 200 220 86

SG80-220-40-TR 80 220 240 40

SG80-220-56-TR 80 220 240 56

SG80-220-86-TR 80 220 240 86

SG100-100-40-TR 100 100 120 40

SG100-100-45-TR 100 100 120 45

SG100-100-50-TR 100 100 120 50

SG100-100-73-TR 100 100 120 73

SG100-150-40-TR 100 150 170 40

SG100-150-45-TR 100 150 170 45

SG100-150-50-TR 100 150 170 50

SG100-150-73-TR 100 150 170 73

SG100-200-40-TR 100 200 220 40

SG100-200-45-TR 100 200 220 45

SG100-200-50-TR 100 200 220 50

SG100-200-73-TR 100 200 220 73


These enclosures are specially customized(we produce unique pieces also). Custo-mers will decide about width and depth.You can choose the height between 1 HU,2 HU, 3 HU or 4 HU. (See side-pieces –chapter “profiles”). KG enclosures areused in data technology, in the electronic,in testing sets, in engine constructions,etc..

MaterialAluminum

Content of deliveryEnclosures with a 3mm thick front-andrear panel. Depth and width as required by the customer

OptionsWe also offer handles and pedestalsfor the enclosures.


KG 2 - 220 - 150 - TRSurfaceTR, TA, CN, TE, TEF (see technicalinformation)

Width B (mm)

Depth T (mm)

Height H (HE)

Design

KG series

Dimensions, KG series

➀ Side-piece 1-4 HU

➁ Cover

➂ Bottom plate

Dimensions in mm

Profile overview, KG series

Design height unit (H )

SP-1 1 HE ( 40,0 mm)

SP-2 2 HE ( 82,0 mm)

SP-3 3 HE (126,5 mm)

SP-4 4 HE (171,0 mm)

➃ Front panel

➄ Rear panel

19191919Profile enclosures

Rear panel Cover

Side-piece

Front panel Bottomplate

Side-piece

Special design

We also design front panels on request,e.g. with drill holes, surface treatments,screen process, etc .

Application

The picture aside shows you an openenclosure equipped with circuit boards inEuropean standard card format.

Sectional drawing, KG series

Application

20202020 Cassette enclosures – RF-milled enclosures

FK series, 3 HU

For an optimum shielding of high fre-quency elements we have the perfectsolution: The FK series. These cassetteenclosures are milled out of an aluminumblock. Their size is designed in Europeanstandard card format for 19 ”plug-inmodule to DIN 41494 (part 5). The specia-lity of these cassettes is, that the dimen-sions inside show European Standard Cardformat also (100 x 160 mm) and the circuitboards are fixed in norm position. Casset-tes in the same design are deliverable as a6-HU-cassette (233,4 x 160 mm or 233,4 x220 mm) also .Both cassette types areoffered in 6 different widths (5 TE, 6 TE, 7TE, 8 TE, 10 TE and 12 TE). Partial measu-res are called TE (1 TE = 5,08 mm).

Front panelsAluminum, 2,5 mm thick standard: colorless anodized, back side chromizedwith plastic nipples current conducting:colorless anodized, back chromized withmetall nipples

Height (H) 3 HU= 128,40 mm6 HU= 261,80 mm

Width (Ba) 5 TE= 25,00 mm6 TE= 30,10 mm7 TE= 35,20 mm8 TE= 40,30 mm

10 TE= 50,40 mm12 TE= 60,60 mm

Content of deliveryMilled frame with two inlay covers com-pleted with screws to fix the covers. If thefront panel is ordered, we add the moun-ting material.

Special designThe basic structure can include sectionsand separators as well as mounting provi-sions for various plugs made on request.


FK3 1 - 5 - 1 - 2 - TRStandard surface TR, TA, CN (see technical information)

Millings for connectors0 = without millings1 = for 96-pole connectors to DIN 416122 = for 9-pole SUB-D connectors3 = for 15-pole SUB-D connectors4 = for 25-pole SUB-D connectors

Front panel1 = without front panel2 = with standard front panel without handles3 = with standard front panel with handles4 = with current conducting front panel without handles5 = with current conducting front panel with handles

Width Ba (5 = 5 TE, 6 = 6 TE, 7 = 7 TE, 8 = 8 TE, 10 = 10 TE, 12 = 12 TE)

Depth (1 = 160 mm, 2 = 220 mm)

Basic version (FK 3 = 3 HU)

2121Cassette enclosures – RF-milled cassettes 212121212121212121212121

FK series, 6 HU


FK6 1 - 5 - 1 - 0 0 - TAStandard surface TR, TA, CN (see technical information)

Millings for connectors above

Millings for connectors below 0 = without millings1 = for 96-pole connectors to DIN 416122 = for 9-pole SUB-D connectors3 = for 15-pole SUB-D connectors4 = for 25-pole SUB-D connectors

Front panel1 = without front panel2 = with standard front panel without handles3 = with standard front panel with handles4 = with current conducting front panel without handles5 = with current conducting front panel with handles

Width Ba 5 = 5 TE6 = 6 TE7 = 7 TE8 = 8 TE

10 = 10 TE12 = 12 TE

Depth1 = 160 mm2 = 220 mm

Basic design (FK 6 = 6 HU)

Construction and dimensions, FK series

Front panel enclosuresBa H h

5 TE 25,00 24,5 10,4

6 TE 30,10 29,5 15,4

7 TE 35,20 34,6 20,5

8 TE 40,30 39,6 25,5

10 TE 50,40 49,8 35,7

12 TE 60,60 59,8 45,7

Dimensions in mm

22222222222222 Cassette enclosures 22222222

deep

Dimensions in mm

Dimensions, FK series, 3 HU

Sectional drawing oflength of the enclo-sures with millingsfor connectors to DIN41612 and mountedEurope card

Millings for connectors, FK series, 3 HU

FK cassette with millings for 64/96-pole connectors to DIN 41612 FK31 cassette with millings for SUB-D connectors

25-pole 15-pole 9-pole

Please, see the chapter of drilling hole-pattern fordimensions for millings

Fitting examples, FK series, 3 HU

Adapter plateto DIN 41612

Adapter plateto DIN 41612

RF-ports

FK31 cassette with an angled SUB-D connector, 25-pole, including adapterplate for standard 19” module rack to DIN 41494.

FK31 cassette in a module rack to DIN 41494. The combined design iswith filtered SUB-D connectors and rf-connectors.

Possibility to place SMS-RF-connectors.

Dimensions in mm

2323Cassette enclosures 2323

deep

Dimensions, FK series, 6 HU

Sectional drawing about length of the enclosures and millingsfor connectors to DIN 41612 and mounted Europe card.

Millings of connectorsFK cassette with 6 HU, the backwith millings for 64/96-pole con-nectors to DIN 61412.

position top position top

position bottomposition bottom

FK cassette with 6 HU, theback with millings for SUB-Dconnectors 25-pole.

Accessories for cassettes ofthe FK series

Adapter plate with SUB-D-connector tobuild-in a module rack to DIN 41494.

AP 25 for 25-pole SUB-D connector AP 15 for 15-pole SUB-D connector AP 9 for 9-pole SUB-D connector

Dimensions in mm


AP 9 - TRStandard surface TR, TW (see technical information)

Adapter plate for 9-pole SUB-D connector

Filtered miniature D-Sub connector We also deliver filtered miniature

D-Sub connectors

AP 25 AP 15 AP 9

Dimensions in mm

Dimensions, adapter plate

242424 19”-plug in module2424242424242424

EG series

The 19” plug-in modules are available in 6different heights. An extremely stableand robust construction is reached afterusing thick extrusion type side-pieces(4mm). Profile slots in the side pieces givethe user the possibility to mount variouscomponents sideways, also. The side pie-ces can be exchanged fast and simple.Drill holes and other mechanical modifica-tions, just like front panel lettering arepossible on request.The enclosures are delivered with hand-les, alternatively with chroming round barsteel or with cast aluminum. Differentsizes and versions of these 19” plug-inmodule are available in short-term. If notspecified, the bottom plate, the front andback panel are coated with a protectionfoil and the side-pieces are aluminum raw(vibro-finished).

SurfaceFollowing options are available:Nickel-plated, alodyned or anodized (seetechnical information)

Content of deliveryEach 19” plug-in module is packed anddelivered as a complete set including allnecessary screws. Ordered without hand-les, the front panels won´t have drill holesto mount handles.

Depth of cover up to 150 mmMaterial: aluminum, width: 399 mm (mounting area), thickness: 3 mm Cover : 150mm depth Material: aluminum cover perforates (variable versions, see our order key)Width: 399 mm (mounting area), thickness: 0,8 mm

Rear panel, RP seriesMaterial: aluminum base alloy, width: 433 mm, thickness: 3 mm

Side-pieceMaterial: aluminumbase alloy (extrudedsection), height: see diagram

Bottom plateMaterial: aluminum base alloy Thickness: 3 mm (standard), on request 4 mm available

Front panel, FP seriesMaterial: aluminum base alloyWidth: 19” (482,6 mm), height: 1to 6 HUThickness: 4 mm (3 mm optional)

SurfaceStandard version: No surface treatment. On request wewill deliver yellow alodyned or color-less anodized also .

Information about 19” front and rear panels as well as handles, please see chapter “accessories”. Dimensions of side-pieces of the SP series see chapter “profiles”.

Technical information, EG series

252525252525252519”-plug-in module 2525252525252525

Dimensions, EG series

Dimensions in mm


EG 1 - 150 - 1 - 4 - GRS-1 - X

Perforated covers are only available in the sizes 150 / 250 / 350 / 450

Surface treatmenton request (see technical infor-mation)

Handle design(on request)

Round bar steelGRS-12 = 1 HU GRS-22 = 2 HU GRS-32 = 3 HU GRS-42 = 4 HU GRS-52 = 5 HU

Cast aluminumGRA-22 = 2 HUGRA-32 = 3 HUGRA-42 = 4 HUGRA-52 = 5 HU/6 HU

Front panel 3 = 3 mm thick 4 = (4 mm thick,

standard)

Cover1 = perforated

aluminum cover, blue varnished, standard depth at 150 mm

2 = perforated aluminum cover, surface: raw

3 = perforated aluminum cover, surface: colorless anodized

4 = perforated aluminum cover, surface: yellow alodyned

5 = perforated steel cover,surface: gray varnished

6 = aluminum cover, 3 mm thick (raw, not perforated), standard depth up to 150 mm

Depth (150 mm)

Basic design

Sectional drawing, EG series

Standard design

Depth T 1-HE-Model 2-HE-Model 3-HE-Model 4-HE-Model 5-HE-Model 6-HE-Model(mm) h = 40 mm h = 82 mm h = 126,5 mm h = 171 mm h = 208,5 mm h = 253 mm

100 EG1-100-6-4 EG2-100-6-4 EG3-100-6-4 EG-4-100-6-4 EG5-100-6-4 EG6-100-6-4

150 EG1-150-1-4 EG2-150-1-4 EG3-150-1-4 EG-4-150-1-4 EG5-150-1-4 EG6-150-1-4

250 EG1-250-1-4 EG2-250-1-4 EG3-250-1-4 EG-4-250-1-4 EG5-250-1-4 EG6-250-1-4

350 EG1-350-1-4 EG2-350-1-4 EG3-350-1-4 EG-4-350-1-4 EG5-350-1-4 EG6-350-1-4

450 EG1-450-1-4 EG2-450-1-4 EG3-450-1-4 EG-4-450-1-4 EG5-450-1-4 EG6-450-1-4

550 EG1-550-1-4 EG2-550-1-4 EG3-550-1-4 EG-4-550-1-4 EG5-550-1-4 EG6-550-1-4

650 EG1-650-1-4 EG2-650-1-4 EG3-650-1-4 EG-4-650-1-4 EG5-650-1-4 EG6-650-1-4

5 HU versions are based on a combination of side-pieces of the type SP2 (2 HU) and the type SP3 (3 HU).6 HU versions are based on a combination of side-pieces of the type SP3 (3 HU).

Handles26262626262626262626262626262626

GRS and GRA series

GRS series

The handles of this serie are made out ofground, polished, high gloss chromedround barsteel with 8 and 10 diameters.Female thread with M4 respectively M5.They´ll be delivered by pairs with twowashers and the matching screws.

Design Height HU Dimensions in mm threadsL D H

GRS-12 1 32 8 29 M4

GRS-22 2 55 10 36 M5

GRS-32 3 88 10 36 M5

GRS-42 4 120 10 36 M5

GRS-52 5/6 180 10 36 M5

GRA series

All surfaces are sandblasted and anodi-zed. The female thread is M5. They´ll bedelivered by pairs and with the matchingscrews.

Design Height HU Dimensions in mmL b

GRA-12 1 25 41

GRA-22 2 55 69

GRA-32 3 88 102

GRA-42 4 120 134

GRA-52 5/6 180 194

27272719”-plug in module – RF-shielded

EGD series

Beside plug-in modules of the EG series,we produce 19” plug-in modules with RFshield (EGD series) also. In spite of theproved slot and spring principle, it is onlypossible to remove the cover and the bot-tom from the front and rear panelwithout dismantling, if the parts get over-worked. Special drillings and millings onrequest. Other dimensions on request.

SurfaceStandard: Aluminum vibratory finishing.Following surfaces are optionally available: Alodyned (low priced surfaceprotection), chemical nickel-plated (corro-sion resisting), optimal shield of magneticsource of interference (see technical information).

Content of deliveryEach 19” plug-in module is packed anddelivered as a complete set including allnecessary mounting screws. Front panelswon´t have drill holes, if ordered withouthandles.

Special versionsWe also deliver 19” plug-in module onrequest.

Technical information, EGD series

282828 19” plug-in module

Dimensions of 19”-front and rear panels

Design Height of units front panel in mm rear panel in mm

EGD2 2 HE 482,6 x 88,1 x 4 443 x 82,0 x 4

EGD3 3 HE 482,6 x 132,5 x 4 443 x 126,0 x 4

EGD4 4 HE 482,6 x 177,0 x 4 443 x 171,0 x 4

EGD5 5 HE 482,6 x 221,4 x 4 443 x 208,5 x 4

EGD6 6 HE 482,6 x 265,9 x 4 443 x 253,0 x 4

Further information see chapter “accessories”, FP series.

Standard designs

Depth T 2 HE 3 HE 4 HE 5HE 6 HE(mm) h = 82 mm h = 126,5 mm h = 171 mm h = 208,5 mm h = 253 mm

250 EGD2-250 EGD3-250 EGD4-250 EGD5-250 EGD6-250




EGD 2-250 - GRS 22 - XStandard surfacetreatment on request (see technical infor-mation)

Versions of handlesRound bar steel GRS-12 = 1 HUGRS-22 = 2 HUGRS-32 = 3 HUGRS-42 = 4 HUGRS-52 = 5 HU/6 HU

Cast aluminumGRA-22 = 2 HUGRA-32 = 3 HUGRA-42 = 4 HUGRA-52 = 5 HU/6 HU

Standard design

Front view

Rear view

Dimensions of enclosures, EGD series

Drill holes for handles, only if ordered.

Dimensions in mm

292929Cassette enclosures – RF-cassettes

Back with a mounted connector.

The HK cassettes can be placed individual in amodule rack with 7 TE raster back plane.

The cassettes can be changed fast and without anyproblems.

Applications

HK series

The 3-HU aluminum cassettes fit in every4,4” module rack to DIN 41494 or, underassistance of guide bars (KF2 series), intoany 19”-Europe card plug-in modules toDIN 41494. The HK serie is available intwo different depths to take up Europecards with 100 x 160 mm or 100 x 220mm.Both cassette types are available in 4 dif-ferent widths (7 TE, 14 TE, 21 TE and 28TE). The distance of the guide slots for thecircuit boards is 1 TE (5,08 mm).We also supply the cassettes with lengthpartition walls on request.

Standard surfaceCassette and rear panel vibratory finishing, colorless alodyned. Front panelcolorless anodized, the back chromized.

Content of deliveryCassette with mounted front and rearpanel including M2,5 neck screws.

The HK serie is available in 4 different widths and 2 different length.

Standard design

Design Height of front panel width of front panel Length of profile(3 HU) B T

HK07-1 128,4 mm 7 TE = 35,2 mm 160 mm

HK04-2 128,4 mm 7 TE = 35,2 mm 220 mm

HK14-1 128,4 mm 14 TE = 70,8 mm 160 mm

HK14-2 128,4 mm 14 TE = 70,8 mm 220 mm

HK21-1 128,4 mm 21 TE = 106,3 mm 160 mm

HK21-2 128,4 mm 21 TE = 106,3 mm 220 mm

HK28-1 128,4 mm 28 TE = 141,9 mm 160 mm

HK28-2 128,4 mm 28 TE = 141,9 mm 220 mm

RF-cassettes with different widths in a 19” module rack.

303030 Cassette enclosures

Dimensions in mm

7 TE 28 TE

14 TE 21 TE


HK07 - 1 - 2 - 1 1 = Rear panel without millings 2 = Rear panel with millings

for connectors to DIN 41612

2 = with front panel, without handles

3 = with front panel, with handles

1 = for Europe cards 100 x 16 mm

2 = for Europe cards 100 x 220 mm

Design

Dimensions, HK series

31313119” module rack

EB series

19” module racks, which are holding hig-hest mechanical stability. A speciality arethe full length extruded side-pieces profi-les. These general-purposed module racksare suitable to built-in assemblies basedon the standard card format to DIN 41494part 1 -5. Assemblies and Europe cardscan be built-in in the front and/or in theback. Generally, the module rack includes twohandles.

MaterialAluminum

Surface White alodyned.Offers best design as well as additionalsurface protection.

Content of deliveryAs an unmounted kit including side-pieceswith height rows and termination extru-sions, horizontal extrusions, female multi-point connectors, threaded rails M2,5,handles and mounting accessories.

Part front panel and rear panel are notincluded but can be separately ordered.(see technical information)

Standard design

Design width depth height B (mm) b (mm) T (mm) t (mm) H (mm) hs (mm) e (mm)

EB3-245 447,4 426,72 244,6 232,6 3HU = 132,5 112,5 57,1

EB3-305 447,4 426,72 304,6 292,6 3HU = 132,5 112,5 57,1

EB3-425 447,4 426,72 424,6 412,6 3HU = 132,5 112,5 57,1

EB3-545 447,4 426,72 544,6 532,6 3HU = 132,5 112,5 57,1

EB6-245 447,4 426,72 244,6 232,6 6HU = 265,9 245,9 190,5

EB6-305 447,4 426,72 304,6 292,6 6HU = 265,9 245,9 190,5

EB6-425 447,4 426,72 424,6 412,6 6HU = 265,9 245,9 190,5

EB6-545 447,4 426,72 544,6 532,6 6HU = 265,9 245,9 190,5

Front view Design EB3

Front viewDesign EB6,Partitionedheights

Top view


EB3-245 - 1 - 1 - X

Special surface treatment onrequest

Equipment back0 = without equipment1 = 3 HU for a card format 100 x 160 mm

2 = 3 HU for a card format 100 x 220 mm

3 = 6 HU for a card format 233,4 x 160 mm


5 = 6 HU for two cards with 100 x 160 mm


Equipment front0 = without equipment1 = 3 HU for a card format 100 x 160 mm

2 = 3 HU for a card format 100 x 220 mm



5 = 6 HU or two cards with 100 x 160 mm


Standard design(see design general view)

Examples for the equipment, EB series

EB3-305-1-0

EB3-425-1-1

EB6-305-0-4

EB6-425-3-5Dimensions in mm

323232323232323232323232 19”-front/back/dummy panels

FP, RP, BP series

Standard 19”-front, rear and dummy panels are available in 6 different sizesand can be delivered ex stock.

Versions and materialFront panels:Material is 4 mm thick, aluminum basealloy, available with and without drillholes for handles (covered with protection foil).

Rear panels: Material is 3 mm thick, aluminum basealloyDummy plate:Material 4 mm thick, one side is coveredwith a protection foil.

SurfacesWithout any particulars about the surfacewe´ll deliver the front, rear and dummypanels blank, without chemical surfacetreatment. The following surfaces areoptionally available :Yellow alodyned (ideal priming for further treatment )Colorless anodizedColored anodized (for example black)Varnished to RAL

Drill holesFront panels:FP series with mounted drill holes for theside-pieces and elongated holes. FPx-GR series with additional drill holesfor handles.Rear panels: RP series with mounted drill holes for theside-pieces.Dummy panels:BP series with elongated holes only.

Special versionsWe do mechanical treatments on frontand rear panels (drillings, millings, etc.).Front and rear panels are lettered byscreen print or gravure, e.g. with yourcompany-logo.

19” front panels, standard design

Design height HE dim. in mm A B C D E F

FP1 1 19" x A x 4 43,6 31,7 – – 28,0 –

FP2 2 19" x A x 4 88,1 76,2 – – 70,0 –

FP3 3 19" x A x 4 132,5 57,1 – – 114,5 –

FP4 4 19" x A x 4 177,0 101,6 – – 159,0 –

FP5 5 19" x A x 4 221,4 146,0 – – 114,5 70,0

FP6 6 19" x A x 4 256,9 76,2 190,4 – 114,5 114,5

FP1-GR 1 19" x A x 4 43,6 31,7 – 32,0 28,0 –

FP2-GR 2 19" x A x 4 88,1 76,2 – 55,0 70,0 –

FP3-GR 3 19" x A x 4 132,5 57,1 – 88,0 114,5 –

FP4-GR 4 19" x A x 4 177,0 101,6 – 120,5 159,0 –

FP5-GR 5 19" x A x 4 221,4 146,0 – 180 114,5 70,0

FP6-GR 6 19" x A x 4 256,9 76,2 190,4 180 114,5 114,5

front panel with 3 mm thickness on request

rear panels standard design

Design height HE dim. in mm h E F

RP1 1 443 x h x 3 40,0 28,0 –

RP2 2 443 x h x 3 82,0 70,0 –

RP3 3 443 x h x 3 126,5 114,5 –

RP4 4 443 x h x 3 171,0 159,0 –

RP5 5 443 x h x 3 208,5 114,5 70,0

RP6 6 443 x h x 3 253,0 114,5 114,5

19” dummy panels, standard design

Design height HE Dim. in mm A B C D E F

BP1 1 19“ x A x 4 43,6 31,7 – – – –

BP2 2 19“ x A x 4 88,1 76,2 – – – –

BP3 3 19“ x A x 4 132,5 57,1 – – – –

BP4 4 19“ x A x 4 177,0 101,6 – – – –

BP5 5 19“ x A x 4 221,4 146,0 – – – –

BP6 6 19“ x A x 4 265,9 76,2 190,4 – – –

Dimensions, front and rear panels

1 – 4 HE 5 – 6 HE

Dimensions in mm

* Only for FP series** Only for handles

1 – 4 HE 5 – 6 HE

Front and dummy panels, FP and BP series

Rear panels, RP series

3333333333333333Part front panels 3 HU and 6 HU 33333333

Standard design

Dimensions in mm Design without handles Design with handlesA B C 3 HU 6 HU 3 HU 6 HU 3 HU 6 HU 3 HU 6 HU

H = 128,5 mm H = 261,8 mm

3 TE 14,84 – – F32-3 F62-3 TF32-3 TF62-3 F33-3 F63-3 TF33-3 TF63-3

4 TE 19,92 – – F32-4 F62-4 TF32-4 TF62-4 F33-4 F63-4 TF33-4 TF63-4

5 TE 25,00 – – F32-5 F62-5 TF32-5 TF62-5 F33-5 F63-5 TF33-5 TF63-5

6 TE 30,08 – – F32-6 F62-6 TF32-6 TF62-6 F33-6 F63-6 TF33-6 TF63-6

7 TE 35,16 – – F32-7 F62-7 TF32-7 TF62-7 F33-7 F63-7 TF33-7 TF63-7

8 TE 40,24 25,4 – F32-8 F62-8 TF32-8 TF62-8 F33-8 F63-8 TF33-8 TF63-8

10 TE 50,40 35,56 – F32-10 F62-10 TF32-10 TF62-10 F33-10 F63-10 TF33-10 TF63-10

12 TE 60,56 45,72 – F32-12 F62-12 TF32-12 TF62-12 F33-12 F63-12 TF33-12 TF63-12

14 TE 70,72 55,88 – F32-14 F62-14 TF32-14 TF62-14 F33-14 F63-14 TF33-14 TF63-14

16 TE 80,88 66,04 – F32-16 F62-16 TF32-16 TF62-16 – – – –

20 TE 101,20 86,36 – – – TF32-20 TF62-20 – – – –

21 TE 106,28 91,44 – F32-21 F62-21 TF32-21 TF62-21 F33-21 F63-21 TF33-21 TF63-21

24 TE 121,52 106,86 – – – TF32-24 TF62-24 – – – –

27 TE 136,76 121,92 – – – TF32-27 TF62-27 F33-27 F63-27 TF33-27 TF63-27

28 TE 141,84 127,00 – F32-28 F62-28 TF32-28 TF62-28 F33-28 F63-28 TF33-28 TF63-28

30 TE 152,00 137,16 – F32-30 F62-30 TF32-30 TF62-30 – – – –

32 TE 162,16 147,32 – F32-32 F62-32 TF32-32 TF62-32 – – – –

36 TE 182,48 167,64 – F32-36 F62-36 TF32-36 TF62-36 – – – –

40 TE 202,80 187,96 – F32-40 F62-40 TF32-40 TF62-40 – – – –

41 TE 207,88 193,04 – F32-41 F62-41 TF32-41 TF62-41 – – – –

42 TE 212,96 198,12 – F32-42 F62-42 TF32-42 TF62-42 – – – –

44 TE 223,12 208,28 – F32-44 F62-44 TF32-44 TF62-44 – – – –

60 TE 304,40 289,56 147,32 F32-60 F62-60 TF32-60 TF62-60 – – – –

63 TE 319,64 304,80 147,32 F32-63 F62-63 TF32-63 TF62-63 – – – –

81 TE 411,08 396,24 198,12 F32-81 F62-81 TF32-81 TF62-81 – – – –

84 TE 426,32 411,48 203,20 F32-84 F62-84 TF32-84 TF62-84 – – – –

F and TF series

Compatible for all module racks to DIN 41494

MaterialAluminum base alloy, 2,5 mm thickFront panel is colorless anodized Rear panel is chromized

F seriesWith plastic nipples

TF seriesWith metal nipples

Content of deliveryfront panel with holes 5,9 x 3,3 mm; F series with black plastic nipples(unmounted), TF series with metal nipples; including M2,5 x 11 neckscrews


F 3 2 - 10Width A (TE)

2 = without handles3 = with handles

Height 3 HU (128,5 mm) or 6 HU (261,8 mm)

F = plasticTF = metal

Dimensions, F and TF series

343434343434343434343434 19” plug-in module enclosures

Cover and bottom plates, DB series

These cover and bottom plates are used inmodule racks of the EB series.

Version 1Aluminum covers or bottomsWith ventilation slots, plastic coated, 1,5mm thick.

Version 2Perforated cover sheetThickness: 1 mm Holes: 2 mm diameterSurface: white alodyned (Alodyne 1500)

Version 3Aluminum cover/bottom by full materialThickness: 2 mmSurface: white alodyned

Content of delivery1 cover or bottom 4 lens head screws M3 x 6

Standard designs

Design Application Depth T (mm) t (mm)

DB-245-X EB3-245 / EB6-245 207 179

DB-305-X EB3-305 / EB6-305 267 239

DB-425-X EB3-425 / EB6-425 387 359

DB-545-X EB3-545 / EB6-545 507 479

Abmessungen in mm

Version 1

Version 2 Version 3

Cards and cassettes guide bars

Design Depth Application

KF1-160 160 mm for the incorperation of plug-in moduls to DIN 41494

KF1-220 220 mm for the incorperation of plug-in moduls to DIN 41494

KF2-160, 4.4 inch 160 mm for the incorperation of plug-in moduls in 4,4" heights

KF2-220, 4.4 inch 220 mm for the incorperation of plug-in moduls in 4,4" heights

Examples for 19-plug-in modules with mountedcard or cassettes guide bars.

Dimension, DB series


DB245 - xVersion 1, 2 or 3

Design

353535353535Accessories

DC-feed throughs, ground connection ...

DC-feed throughs

We offer various models of teflon isolatedDC-feed throughs. Type D1 and KF1 aredelivered without nut and tooth lock washer.

DC-feed throughs filters

Feed throughs filters prevent over powersupply, that the rf-signals enter respecti-vely treat out of enclosures.

Technical data about DC-feed through filters

Type max. voltage max. current (+85°C)

DF2 350 V DC 10 A

DF3 200 V DC 10 A

Delivered with nut and washer.Technical data sheets are available on request.

Ground connections, GP series

2 different types are available. Brass tinned ground connections, solderable passivated

Blind plug, BST Series

Made out of aluminum, 3 types are available

Soldering lug (100 units)

Brass, silver platedAccessories EH-series

Frequency in Hz

Inse

rtion

loss

in d

B

Typical attenuation DC-feed through filters

Accessories -screw taps363636363636

To make the additional built-in of connec-tors, etc. in enclosures easier, we offer youa number of screw taps.

screw taps

Thread -Ø x pitch bore hole-Ø Applicationin mm in mm in mm

Metric threads ISO (DIN 13)

M1.4 – 1,1 Screws

M1.6 – 1,25 Screws

M2 – 1,6 Screws

M2.5 – 2,05 Screws

M3 – 2,5 Ground connection GP

M3.5 – 2,9 DC-feed through D1

M4 – 3,3 Screws

M5 – 4,2 Screws

Metric fine threads ISO (DIN 13)

M5 x 0,5 4,5 DC-feed through D2

M6 x 0,5 5,5 Screws

M6 x 0,75 5,2 ScrewsM9 x 0,5 8,5 1.6/5.6 single hole connectors

M13 x 1 12,0 N-single hole connectors

UNC threads

UNC 2 –56 1,8 Screws

UNC 3 –48 2,1 Screws

UNC 4 –40 2,3 Screws (mounted SUB-D)

UNC 8 –32 3,5 DC-feed through filter DF3

UNF threads

UNF 10 –32 4,1 RF-connectors, SMS, SMB,SMC

UNEF threads

UNEF 12 –32 4,8 DC-feed through filters DF2

UNEF 3/8 –32 8,4 BNC-single hole connector

UNS threads

UNS 1/4 –36 5,7 SMA-single hole connector

Accessories – Screws and clamp 37

Design and description size application unit/ package

LKS-M3 x 06-100 M3 x 6 100cross-recess oval head screw, coaxial flange connectorpassivated high-grade steel to DIN 7985-A2

LKS-M2,5 x 06-100 M2,5 x 6 100cross-recess oval head screw, enclosures DIN 7985-A2

SES-M2 x 06-100 M2 x 6 100cross-recess countersunk screw, enclosures passivated high-grade steel to DIN 965-A2

SES-M5 x 12-100 M5 x 12 100cross-recess countersunk screw, EG-plug in modulepassivated high-grade steel to DIN 965-A2

SES-M3 x 06-100 M3 x 6 100cross-recess countersunk screw, enclosurespassivated high steel to DIN 965-A2

SES-M2,5 x 06-100 M2,5 x 6 100cross-recess countersunk screw, cover mounting, AG-seriespassivated high steel to DIN 965-A2

SESK-M2 x 06-3-100 M2 x 6 100countersunk screw with a small head cover mounting ZG/PGS/AGS (Ø 3,0 mm) and with cross slot, steel, nickel plated

LKS-M1,4 x 04-100 M1,4 x 4 100cross-recess oval head screw, self-tapped mounting UC/AGS/TC(without chip), steel, nickel plated, to DIN 7500-C

ULS-2,5-100 Ø 2,7 100Washers for screws M2,5 to DIN 125 A coaxial flange connector

ULS-3-100 Ø 3,2 100Washers for screws M3 to DIN 125 A coaxial flange connector

FES-2,5-100 Ø 2,7 100spring washers, high-grade steel to DIN 137 A coaxial flange connector

FES3-100 Ø 3,2 100Spring washers, high-grade steel to DIN 137 A coaxial flange connector

NIP-1-100 100Nipples, plastic, black front panel, F series

HS-M2,5-11-100 M2,5 x 11 100Neck screws, suitable for nipples 1 and 2 front panel, F/TF series

NIP-2 1Metal nipples front panel, TF series

Screws and clamp

Technical information – mechanical treatment38

Mechanical treatment

Front panels, back panels, enclosures andcassettes are offered with mechanical treatments also, that is drillings ,threads,millings, fuses, switches, LED´s, DC-feedthrough filter, etc.Various drill-hole patterns and standardmillings, which are needed to fit in com-ponents are saved in our CNC -machinesand can be retrieved fast.The drill-hole picture list makes it possiblefor our customers to specify standarddrill-hole pictures and standard millings.To manufacture, it´s enough to mark thedrill holes and the positions on a sketch. We´ll send you the CAD drawings of ourenclosures in which you can mark yourdrillings and millings, on request.Surface treatments, lettering with screenprinting or gravures are possible.

Surfaces

Our enclosures are available in varioussurface treatments.

Surface structure (preliminary treatment)T = vibratory finishingP = polished (on request)G = blastedC = matt

Surface refinementR = raw (without chemical refinement)A = yellow chromized (Alodyne 1200) W = colorless chromized (Alodyne 1500)N = chemical nickel plated (soldering)E = colorless anodizedEF = colored anodized

(if ordered, specify color)G = gildedS = silvered

Example

ZG 1 - 2 - T RSurface refinement

Surface structure

Please, specify surface treatment with 2-digits at the end of the order key, if youorder customized enclosures.

Description of surfacesT = vibratory finishingStandard surface structure of all series inthe catalogue.

P = polished (manual)Decorative surface

G = blasted Matt version, decorative. Recommended,if nickel-plated afterwards (problematicalat tapped blind hole).

C = chemical pickled, matt version (pro-blematical at fits) chemical nickel plated.The parts are powerless nickel-plated. Thesurface can be soldered. Layer 8 – 10 µ.

Anodized Aluminum parts are anodized.

Layer 15 – 18 µ. Decorative surface butnon-conductive. If requested, please spe-cify colour, e.g. colorless, black or anodi-zed similar RAL color scale.

Alodyned (chromized)A = yellow alodyned W = white alodyned

Low priced surface protaction (corrosionprotaction). Good priming for varnishingas well.

Technical information – drill hole-pattern 39

Drill hole-pattern

M… metric threadsU… inch threads (UNC, UNF, UNEF)

Examples

B 4.2/t 12 Drilling Ø4,2 mm,12 mm deep

B 5 Drilling Ø 5mm

AF 5 Counter bore DIN 74-Af 5

U 8-32 Threads UNC8-32

M6/t 10 Thread M6,10 mm deep

SD 9 N

SD 9 U

SD 15 N

SD 15 U

SD 25 N

SD 25 U

SD 37 N

SD 37 U

SD 50 N

SD 50 U

Sub D 9-pole

Sub D 15-pole

Sub D 25-pole

Sub D 37-pole

Sub D 50-pole

B… drilling

B…/t… drilling (tapped blind hole)/depth

M…/t… metric threads (tapped blind hole) U…/t… inch threads (tapped blind hole)

Af… counter bore to DIN 74 Af...(90°)

Dimensions in mm

Technical information 40

F 2-12,2 SMA 2-hole-flange

F 4-12,7 3/4"-Flange

F 4-18,2

RD 1

RD 2

round-miniature-connector

RIB 24 micro ribbon 24-pole



Drill hole-pattern

standard 1”-flange

Dimensions in mm

We produce precision milled components for electronic industry,for aerospace industry and for optical industry with very highrequirements. We process alloys of light metal, non-ferrousmetals and synthetic materials. Of course we convert externaland internal data of construction to different machine controlsvery fast via CAM technology (computer aided manufacturing,NC-programming).

very modern centers for producing with5-axis-CNC-technology

Complicated multi side processing Certified to DIN ISO 9001:2000 3D-measurement with written protocol 3D-measurement accuracy ± 0,004 mm 3D-measurement axes 400 x 500 x 400 mm

We offer you products with all technical producible surfaceslike chemical nickel, anodized etc.. We manufacture from pro-totypes up to production series according to your templates /graph. On request we equip and mount your product comple-tely. We provide an opportunity for 3D-measurements.

CNC-milling center

Copy this page, fill it out and send it back to MTS Systemtechnik.Please don´t forget your address!

Company

Name Dpt.

Street

Post code Location

Phone Telefax

E-Mail

Answer to Fax-Nr.

0906/6661

About the selected products send me detailed information send me an offer call me

Systems and units Signal distribution units Antenna distrib. units / multi couplers Combiners Remote controlled switching units Filter units Ventilation units Matrices Coupling units Air interface adapters Shielding boxes

Components Coaxial relays Multi channel switches Videorelays Feedthrough terminations DC-blocks Fixed attenuators Terminations

Coaxial short circuits Power attenuators and power terminations Signal dividers, power splitters,combiners and

multi couplers Programmable step attenuators Coaxial cable assemblies Bias tees Directional couplers Impedance matching modules PC controlled components Amplifiers

Mechanical modules RF shielded enclosures Structural enclosures Custom specified enclosures Milled components Milled cassettes Cassette enclosures 19"-racks

Data technology Controller cards and accessories for operators

in electronic Control units Custom specified interface units Development of firm- and software

Services CAD development and customerspecified

CNC milled modules Mounting of components to and testing of RF

printed circuit boards Engineering-service Programming-service

Distribution forIMS Connector-Systems GmbH Coaxial connectors Terminations Coaxial adapters Coaxial cable assemblies

SystemtechnikRF-systems and -units

Data technology

Mechanical products

Systems and instruments42

Signal distribution units for

Video signals

LF, HF, VHF, UHF

Data signals / control units

PC controlled signal switching units

With standard relays

Customer-specified (for measurementusage)

With control software for windows

Matrices for

Audio signals

Video signals

LF, HF, VHF, UHF

Satellite communication

Microwave applications

Filter units

Coupling units

Air interface adapter

Shielding boxes

For testing GSM-modules within defined environmental influences

Possibility of operating the test modu-les during the test with remote control

Aluminum cover (closed) and furthercover with shielded wire mesh to ope-rate the test speciem manually (by closed box)

Systems and instruments

Please send us

Your inquiry!

Overview of components 43

Components

Coaxial relays for RF-and videoapplications

One-way and multi-way switches DC-2000 MHz, in 50 or 75 ohm , BNC-,SMA-,N-or other connectors

Low priced switches DC-1000 MHz,with SMA connectors

RF-relays CD-1700 MHz, SP2T and SP4T,with SMA connectors

RF-/video relays DC-1000 MHz, 50 or 75 ohm, with BNC connectors

Multi-way switches For RGB or RGBSsignals, DC-32 MHz, in 50 or 75 ohm

Coaxial relays modules with IEEE-488or RS-232-C-interface

Controller cards and interface modules

Signal dividers and power splitters

Attenuators

programmable step attenuatorsDC-2500 MHz, 0-63 dB, TTL, RS232,RS485

programmable semiconductor attenuators 200-4000 MHz, 0-93 dB

Manual adjustable step attenuators

fixed attenuators DC-18 GHz

Power amplifiers and small signal amplifiers

Coaxial components in 50 or 75

Impedance matching modules

DC-blocks

Coaxial cable assemblies

Ventilation plug in modules

Gewerbepark Ost 8D-86690 MertingenGermanyPhone+49(0) 9 078/ 91294-0 Fax +49(0) 9 078/[email protected]

Systemtechnik

RF-systems and -units

Data technology

Mechanical products

BelgiumMichael Decamp S.A./N.V. Rue de la Technologiestraat, 31 B-1082 Berchem-Ste-Agathe Tel: +32 67-41-17-60 Fax: +32 67-41-17-61 Web: www.decamp.be

GermanyTelemeter Electronic GmbHJoseph-Gänsler-Str. 10 D-86609 Donauwörth Tel: +49-90 67 06 93-0 Fax: +49-90 67 06 93-50 Web: www.telemeter.info

EnglandElion Electronics LTD54 High Street GB-Dormansland, Surrey Engl. RH7 6PYTel: +44-13 42-83 79 69Fax: +44-13 42-83 22 12 Web: www.elionelectronics.com

FrancePyrecap5 Place Salvador Allendé F-91124 Palaiseau Cédex Tel: +33-1-69 20 44 25 Fax: +33-1-69 20 52 75Web: www.pyrecap.com

ItalySupport Logistic ServicesVia Montenero 57/59I-00012 RomeTel: +39-0774363634 Fax: +39-0774572838Web: www.slsroma.it

AustriaKrenn Hochfrequenztechnik GmbHSimmeringer Hauptstr. 421A-1110 Wien Tel: +43-17 48 71 17-0 Fax: +43-17 48 71 17-90Web: www.krenn.at

SwedenRF Partner ABTaljegardsgatan 11 BS-43153 MölndalTel: +46-31 47 51 00 Fax: +46-31 47 51 21 Web: www.rfpartner.se

SwitzerlandTelemeter Electronic GmbHKirchstrasse 28CH-8574 Lengwil-Oberhofen/TGTel: +41-716 699 06 2020Fax: +41-716 699 06 2024Web: www.telemeter.info

SpainSematron Espana S.L.C/Alegria de Oria, 49-57E-28027 Madrid Tel: +34-91 741 23 00Fax: +34-91 320 58 71Web: www.sematron.es

International representatives

Sta

ndM

ai20

05

Milled enclosures

Documents

Transcript of Milled enclosures