Milgard Windows and Doors: Custom New & Replacement Home ...

1
RO AWH ATH TOH 4 9 16 " RO AWW ATW TOW 4 9 16 " *Add more for horns RO Rough Opening TOH Trim Opening Height TOW Trim Opening Width AWH Actual Window Height AWW Actual Window Width ATH Actual Trim Height ATW Actual Trim Width Trim Sill Rough Opening to Unit Size Window Size to Trim Size Unit Size to Trim Opening (Minimum) Groove Filler (Offset = 0") Groove Filler (Offset = 0") RO Width - 1/2" = AWW RO Height - 1/2" = AWH AWW + 0" = ATW AWH + 0" = ATH AWW + 0" + 1/2" = TOW AWH + 0" + 3/4" = TOH 1-3/8" Sill Nose (Offset = 1-7/16") RO Width - 1/2" = AWW RO Height - 1/2" = AWH AWW + 0" = ATW* AWH + 1-7/16"= ATH AWW + 0" + 1/2" = TOW* AWH + 1-7/16" + 3/4" = TOH Window Exterior Accessories More Technical Documents can be found at milgard.com/professionals Due to continual research and development, details may be changed at any time. ©2015 Milgard Mfg Wall Section Drawing Trim Groove Filler - Nail Fin Revision Date 5/22/2015 Inch Window N/A NTS Units Type View CAD File Scale

Transcript of Milgard Windows and Doors: Custom New & Replacement Home ...

Page 1: Milgard Windows and Doors: Custom New & Replacement Home ...

A

A BB

RO AWH ATH TOH

4 916 "

RO

AWW

ATW TOW

4 916 "

*Add more for horns

RO Rough OpeningTOH Trim Opening HeightTOW Trim Opening WidthAWH Actual Window HeightAWW Actual Window WidthATH Actual Trim HeightATW Actual Trim Width

Trim Sill Rough Openingto Unit Size Window Size to Trim Size Unit Size to Trim Opening

(Minimum)

Groove Filler(Offset = 0")

Groove Filler(Offset = 0")

RO Width - 1/2" = AWWRO Height - 1/2" = AWH

AWW + 0" = ATW AWH + 0" = ATH

AWW + 0" + 1/2" = TOWAWH + 0" + 3/4" = TOH

1-3/8" Sill Nose(Offset = 1-7/16")

RO Width - 1/2" = AWWRO Height - 1/2" = AWH

AWW + 0" = ATW*AWH + 1-7/16"= ATH

AWW + 0" + 1/2" = TOW*AWH + 1-7/16" + 3/4" = TOH

Window Exterior Accessories

More Technical Documents can be found at milgard.com/professionalsDue to continual research and development, details may be changed at any time. ©2015 Milgard Mfg

Wall Section Drawing

TrimGroove Filler - Nail Fin

Revision Date5/22/2015InchWindow N/A NTS

UnitsType View CAD File Scale