Midwest #23,2012
-
Upload
construction-equipment-guide -
Category
Documents
-
view
301 -
download
4
description
Transcript of Midwest #23,2012
By Lori LovelyCEG CORRESPONDENT
After a three-year absence, IndyCar racingreturned to Belle Isle last June, but a triumphantreturn was marred when the Detroit Grand Prixwas red-flagged for two hours to repair two sec-tions of the circuit after the track began to fallapart. Fans watched at the track and on live TVwhile crews scrambled to fill holes and replacelong strips of synthetic rubber that had comeloose. Once the temporary fix was completed,only 60 of the scheduled 90 laps were complet-
ed, due to time constraints.After the race, the Chevrolet Detroit Belle Isle
Grand Prix, a 501(c)3 organization and sub-sidiary of the Downtown Detroit Partnership,conducted an engineering evaluation of the cir-cuit to determine the extent of the repairs need-ed. “The concrete broke at the joints,” said GaryBaise, operations director. “It had been neglect-ed.”A deluge of rain and water pressure from the
Detroit River caused the concrete to fail, Baisesaid. Core samples revealed that no sealer had
$3.00
4
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®
MMiiddwweessttEEddiittiioonn
see HOMES page 54
In addition to paving work, the circuit for the 2013 Chevrolet Detroit Belle Isle Grand Prixis being modified to enhance competition.
By Alex VeigaAP REAL ESTATE WRITER
LOS ANGELES (AP) Confidenceamong U.S. homebuilders remains at itshighest level in six years, reflectingimproved optimism over the strengtheninghousing market this year and a pickup invisits by prospective buyers to builders’communities. The National Association of Home
Builders/Wells Fargo builder sentimentindex released Oct. 16 rose to 41 thismonth, up from 40 in September. That’sthe highest reading since June 2006, justbefore the housing bubble burst. Any reading below 50 indicates nega-
tive sentiment about the housing market.The index hasn’t been above 50 sinceApril 2006, the peak of the housing boom. The gauge of current sales and builders’
outlook on sales over the next six monthsremained unchanged from September’sreading. But a measure of traffic byprospective buyers rose 5 points to 35, thehighest level since April 2006. The survey is based on responses from
400 builders. It has been trending highersince last October, when the reading stoodat 17. The index sank to 8, its lowest pointdating back to 1985, in January 2008. Recent housing data continue to point to
HomebuildersRemain Certainin Six-Year High
Lambeau Field Hosts
Press Event...10
Students Tour Murphy
Tractor Facilities...20
Cat Introduces New
Technologies...14
Inside
Published Nationally
November 10, 2012 • Vol. IXX • No.23 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
www.constructionequipmentguide.com
Takeuchi Completes Agreement With TerexTakeuchi Manufacturing (U.S.) Ltd.
announced the completion of a new supplyagreement with Terex Construction for the sup-ply of eight new models of Takeuchi brandedskid steer loaders.
This agreement will provide Takeuchi with acomprehensive range of high specification, highperformance, vertical and radial lift skid steersloaders to complement its existing line of com-pact equipment. Takeuchi’s current distribution
and support channels will handle sales, rentaland parts supply and customer support needs forthe new skid steer loaders.“Takeuchi is dedicated to meeting the chang-
see AGREEMENT page 100
see INDYCAR page 34
Organization Paves Way forIndyCar Racing’s Return
Table of Contents ....................4
Attachment Section ........37-43
Snow & Ice Section..........45-49
Recycling Section ............55-71
Business Calendar ................76
Truck & Trailer Section ...79-87
Auction Section................91-99
Advertisers Index ................102
Page 2 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
PATT
EN C
ONST
RUCT
ION
PROD
UCTS
Call 877-688-2228Fax: 630-279-9243
www.pattencat.comComplete inventory available online
Cat 226B2, 2009, W2130 NA, EROPS, A/C, Heat ..............$29,000
Cat 236B, 2005, UE1233, EROPS, Heat, Self-Leveling ......$25,000
Cat 252B2, 2008, W1819, EROPS, Heat, 1SPD, QC ..........$29,000
Cat 252B2, 2008, W1822, EROPS, A/C, 1SPD, QC............$29,000
Cat 256C, 2007, W1533, EROPS, Heat, A/C ......................$29,000
Cat 256C, 2007, W1531, EROPS, Heater, QC ....................$25,000
Cat 287B, 2007, W1561, Self-Leveling, Man QC ..............$29,000
Cat 287B, 2007, W1562, OROPS, Self-Leveling ................$25,000
Cat 289C, 2009, W2153 NA, Cab, A/C, Hyd QC ................$59,000
Cat 289C, 2009, W2115, EROPS, Heat, Hyd QC................$57,000
Cat 289C 2AIRH, 2009, X0003, EROPS, A/C, QC ..............$49,000
Cat 297C, 2007, W1505, Cab, A/C, Hyd QC...................... $35,000
Cat 297C, 2007, W1545, Cab, A/C, Hyd QC ......................$35,000
Cat 299C, 2008, W1968, EROPS, A/C, Hyd QC ................$50,000
John Deere 320D, 2011, UE1603, EROPS, Bkt ................$29,900
Cat D5G XL, 2007, N5413, EROPS, Heat, A/C ..................$58,000
Cat D5G XL, 2007, N5601, EROPS, Heat, A/C ..................$69,000
Cat D5K LGP, 2008, N5803, Cab, 3rd Valve ....................$100,000
Cat D6K LGP, 2009, N6127, Cab, 4th Valve ....................$178,000
Cat D6T LGP, 2008, UN2165, EROPS, ARO Ready ..........$175,000
Cat 308DCR HMR, 2009, W2107 NA, EROPS, QC ..................$86,000
Cat 320DL, 2008, N5713, Cab, A/C, Heat, QC..................$140,000
Cat 320DL, 2008, UE1565, Cab, A/C, Boom 18’7”, Stick 9’6” $169,000
Cat 325CL, 2004, UE1713, Cab, Stick 10’6”, QC ......................$97,500
Cat 336DL, 2009, N6234 NA, Stick 12’10”, Boom 21’4” $250,000
Cat 345CL, 2008, N5696, Stick 12’10”, Boom 22’8” ........$210,000
Cat 345CL CMB, 2008, UE1472, TB-Pin, Stick 12’10”, Boom 22’8” ..$208,000
SKID STEERS
EXCAVATORS
DOZERS
Miguel Lozano630-279-4400
Cat CB34, 2008, N5921, ROPS Bar, Water Sys, LVL Blade$40,000
CAT CP56, 2008, N5791, OROPS, Padfoot ......................$143,000
Cat CP56, 2008, N5825, OROPS, Padfoot ........................$90,000
Cat CP433E, 2005, UN2062, OROPS ................................$69,000
Cat CS54, 2008, N5757, OROPS, Sm Drum ......................$95,000
Cat CS-433E, 2005, UN2129, OROPS................................$45,000
Cat CS-433E, 2007, UE1492, OROPS, Smooth Drum........$56,500
Cat CS-433E, 2006, UE1499, Canopy, 66” Drum ..............$54,500
Cat 953D, 2008, N5790, EROPS, 2.25 CYD GP Bkt ........$179,000
Cat 963C, 2005, N4354, EROPS, A/C, GP Bkt ................$130,000
Cat 963D, 2008, N5719, Cab, Hyd, Bkt 3.25 CYD............$135,000
Cat 963D, 2008, N5643, EROPS, Heat ............................$132,500
Cat 963D, 2008, N5718, Cab, Track 22’, Bkt GP 3.25CYD $130,000
Cat AP-1055B, 1999, UE1480, Screed, Hose 30’, Truck Hitch $44,000
Cat 430 EX4, 2006, UE1737, Cab, Heater, A/C ..........................$56,000
Cat 906H, 2009, UE1497, EROPS, Ride Ctrl, QC ..............$61,500
Cat 924GZ, 2007, N6145, EROPS, Heat, Ride Control ......$90,000
Cat 924GZ, 2008, N6148, EROPS, Heat, A/C, 2.6 CuYd Bkt ....$75,000
Cat 924H, 2007, N5786, EROPS, Heat, A/C, 2.6 CYD Bkt$105,000
Cat 930H, 2009, N6195, Cab, QC, Ride Ctrl ....................$157,000
CAT 924HZ, 2008, N5875, Cab, A/C, Heat ......................$112,000
Cat 938GII, 2006, N5064, EROPS, A/C, Heat, Ride Cntrl $150,000
Cat 938GII, 2008, UE1483, Cab, QC, Bkt GP 3.5CYD ......$115,000
CAT 966H, 2008, UE1600, Ride Control ............................$268,500
Cat 980GII, 2003, UE1724, EROPS, A/C ..........................$144,000
Cat 980GII, 2003, UE1740, EROPS, A/C, GP Bkt ............$149,000
Cat 980H, 2008, UE1484, EROPS, Heat, A/C ..................$364,000
Cat 988H, 2007, UE1688, EROPS, Rock Bkt, 9.0 CYD ....$260,000
Cat IT28G, 1998, UE1252, EROPS, Hyd Cplr, Bkt GP 2.5CYD $43,000
WHEEL LOADERS/LOADER BACKHOES
TRACK LOADERS
ASPHALT PAVER
COMPACTION
CALL 887-688-2228 INVENTORY CHANGES DAILY
ID# N5875 $112,000
ID# UE1737 $63,000
ID# N5606 $265,000
ID# UE1565 $169,000
ID# N5413 $58,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 3
Largest Independent RentalFleet in the Midwest!!
Illinois Truck & Equipment 320 Briscoe Drive Morris, Illinois 60450Toll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected]
Over 600 units available for rent!!
PartsAuthorized Dealer for
LaBounty, Kobelco and Kawasaki
ServiceFactory Trained Service
Technicians, Complete Rebuild Services & Welding
Including:
100 Hydraulic Excavators
50 Bulldozers
50 Wheel Loaders
30 Articulated Dump Trucks
Lar
Fg arrgest Independent R
Including:
ncludi
Articulated Dump T 30
50 Wheel Loaders
50 Bulldozers
100 Hy
r Dump T Trucks T T
50 Wheel Loaders
e Romplette R, Cnss, CiachniceTTevicerd Sineary T Trorry TttoracFFac
evicerS
ebuild e Re vicce
, yy, KounttyLaBd DuthorizeAarP
o elcob, K Kobealer for d Dtsar
T
Articulated Dump T
oll Free: (800) 941 TToll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450Illinois T
30
p T Dump
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450
Trucks p T
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450
eldinges & W WeldingvicerSe Romplette R, Cnss, CiachniceTTe
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450
eldingebuild e R
awnd K Kawa, yy, KounttyLaB
iasakwwasak
o elcob, K Kob
Page 4 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changesto Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2012, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occa-sionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any adver-tising.
IN THIS ISSUESPECIAL SECTION…RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.
FEATURES…MILLER ELECTRIC MFG. HOLDS PRESS EVENT ATLAMBEAU FIELDMiller staff were on hand showcasing how different welding technologiesare used in the construction industry, specifically structural steelconstruction.
INNOVATION DEMONSTRATED AT CATERPILLARPRESS EVENT Caterpillar introduced several new technologies to national and international media on Oct. 15 to 17 at its facilities in Peoria, Ill.
RAYMOND CENTRAL PUBLIC SCHOOLS TOURMURPHY TRACTOR & EQUIPMENT CO. INC. The industrial tech students are members of SkillsUSA, an organizationwith a goal to make certain America has a savvy and well-informed workforce.
RURAL WATER ASSOCIATION HOLDS OPERATOREQUIPMENT EXPO The expo was a unique training opportunity in that attendees experiencedlive, hands-on demonstrations and equipment operation.
WEST SIDETRACTOR, TWIN CITY COLLISION REPAIRHOLD PINK GATOR FUNDRAISERHundreds of participants purchased raffle tickets for a chance to win apink, custom designed John Deere Gator.
PRICE SLIDE RAIL SYSTEM ASSISTS PRICE-GREGORY INTERNATIONALEven though the system looks similar to a trench shield system, theinstallation and removal are done differently, and require more precision.
ASA MIDWEST COUNCIL OFFICIALS RECEIVEPRESTIGIOUS HONORSThe national American Subcontractors Association (ASA) recognized ASAMidwest Council Executive Director Susan Winkelmann as the “NewExecutive Director of the Year” and past ASA Midwest Council PresidentA.J. Ford as “Chapter President of the Year” during a recent awardsceremony in Alexandria, Va.
36
24
20
14
10
55
76 BUSINESS CALENDAR89 CLASSIFIEDS91 COMING AUCTIONS
EQUIPMENT…80 CATERPILLAR AD60 Underground Truck94 DOOSAN DL550 Wheel Loader
10
14
20
36
MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska
• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
Founder, Publisher & CEO Edwin M. McKeon Sr.Midwest Publisher Joseph S. McKeon
Editor In Chief Craig Mongeau Associate Editor Christine Reckner
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Rolf Krog
Asst. Circulation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900 Toll Free 800/523-2200
Fax 215/885-2910Web site www.constructionequipmentguide.com
Editorial e-mail [email protected] e-mail [email protected]
For advertising rates Contact Joseph S. McKeon
•Illinois • Wisconsin • Northwest Indiana
• Missouri • Kansas
773/769-4090Toll Free 800/632-0233
Fax 773/769-4280e-mail [email protected]
Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio
• Kentucky
440/268-9690Toll Free 800/810-7640
Fax 440/268-9691e-mail [email protected]
Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota
• South Dakota
952/353-1770Toll Free 866/413-4265
Fax 952/353-2750e-mail [email protected]
55
44
54
®
Mobile LinkedIn Facebook Twitter YouTube
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 5
Blaw Knox PF115, ’89 ....................................................$11,500LeeBoy 1000D, ’03, 1,475 hrs ........................................$19,500LeeBoy 8500HD, ’10, 2,140 hrs......................................$54,500LeeBoy 8500HD, ’00, 2081 hrs ......................................$19,500LeeBoy 8500LD, ‘03, 3683 hrs........................................$19,500LeeBoy 8500LD, ‘04, 2,739 hrs ......................................$26,500
Cat RM350B, ’02, 6617 hrs ..........................................$117,500Wirtgen W2000, ’03, 2,996 hrs ........................................$CALLWirtgen W2000, ’96, 9,346 hrs ........................................$CALLWirtgen WR2000, ’11, 334 hrs..........................................$CALLWirtgen W2100, ’04, 8,373 hrs ........................................$CALL
Komatsu WB140-2N, ’04, 2,805 hrs ..............................$27,500
Komatsu HD465-5, ’02, 17,763 hrs ..................................$CALLKomatsu HD465-5, ’02, 17,599 hrs ..................................$CALLKomatsu HD465-5, ’02, 17,268 hrs ..................................$CALLKomatsu HD785-5, ’01, 22,508 hrs ..................................$CALLKomatsu HD785-5, ’01, 25,415 hrs ..................................$CALLKomatsu HM400-2, ’06, 7,781 hrs................................$199,500Komatsu HM400-2, ’07, 7,880 hrs................................$199,500Moxy MT31, ’02, 3479 hrs ............................................$82,000
Concept Products CP2000, ’05 ......................................$13,500
Baker Kurtz 4671 Impactor, ’07 ....................................$325,000Hazmag APS1313-K Impactor ........................................$65,000
Hamm HD13, ’02, 2,937 hrs ..........................................$14,500Hamm HD13, ’06, 320 hrs ..............................................$29,500Hamm HD14VV, ’07, 2,636 hrs ......................................$24,500Hamm HD14VV, ’08, 816 hrs ..........................................$32,500Hamm HD90 Ozzy, ’04, 4,300 hrs ..................................$54,500Hamm HD130, ’03, 1789 hrs ..........................................$49,500
Case 850K XLT, ’04, 2,646 hrs........................................$47,500Case 1150K, ’06, 1,486 hrs ............................................$79,500Cat 963C, ’01, 4800 hrs ..................................................$74,500Cat D4D, ’72......................................................................$7,000Cat D5G LGP, ’05, 3,150 hrs ..........................................$52,500Cat D5H LGP, ’93, 9961 hrs ............................................$54,500Cat D6H LGP, ’91, 3,665 hrs ..........................................$44,500Cat D8H, ’66 ......................................................................$CALLCat D8N, ’87....................................................................$78,000Dresser TD8E, ’81 ..........................................................$13,000Komatsu D37P-5, ’98, 2,624 hrs ....................................$21,500Komatsu D39EX-21A, ’05, 1,176 hrs ..............................$57,500Komatsu D51PX-22, ’08, 2,436 hrs ..............................$129,500Komatsu D61EX-15, ’05, 4,778 hrs ..............................$114,500Komatsu D61PX-15, ’05, 8,864 hrs ................................$77,500Komatsu D65EX-15, ‘05, 5,312 hrs ..............................$129,500Komatsu D65EX-15EO, ’08, 1,365 hrs ..........................$199,500Komatsu D65PX-15EO, ’06, 3,199 hrs..........................$146,500Komatsu D65PX-15EO, ’08, 5,372 hrs..........................$127,500Komatsu D65PX-12, ‘96, 4,969 hrs ................................$49,500Komatsu D155AX-5, ’03, 6,809 hrs ..............................$224,500
Case CX240B, ’07, 4,810 hrs ........................................$114,500Kobelco SK480LC, ’05, 11,858 hrs ................................$54,500Komatsu PC88MR-8, ‘09, 1,195 hrs ..............................$92,500Komatsu PC138USLC-8, ’09, 2,363 hrs........................$104,500Komatsu PC200LC-8, ’06, 4,617 hrs ............................$129,500Komatsu PC220LC-7, ’05, 5,017 hrs ............................$109,500Komatsu PC220LC-8, ’09, 4,020 hrs ............................$149,500Komatsu PC220LC-8, ’09, 5,789 hrs ............................$114,500Komatsu PC270LC-7, ’04, 4,608 hrs ............................$124,500Komatsu PC300LC-7, ’02, 4,887 hrs ............................$134,500Komatsu PC300LC-8, ’09, 1,887 hrs ............................$194,500Komatsu PC400LC-6, ’02, 12,377 hrs ............................$53,000Komatsu PC400LC-6LM, ’03, 8,516 hrs ........................$69,500Komatsu PC400LC-6LM, ’03, 8,760 hrs ........................$72,500Komatsu PC400LC-6LM, ’02, 10,834 hrs ......................$72,500Komatsu PC400LC-7, ’04, 10,300 hrs ............................$99,500Komatsu PC400LC-7, ’04, 12,499 hrs ............................$84,500Komatsu PC400LC-8, ’07, 2,811 hrs ............................$239,500Komatsu PC600LC-7, ’06, 9,977 hrs ............................$185,000Komatsu PC750LC-7, ‘05, 4,517 hrs ................................$CALL
Mustang MTL16, ’05, 2,349 hrs......................................$18,500
Doppstadt SM617, ’09, 290 hrs ....................................$139,000Doppstadt SM720, ’09, 235 hrs ....................................$185,000Doppstadt SM726, ’09, 257 hrs ....................................$225,000
Cat 920, ’73, 7216 hrs ......................................................$7,000Cat 928G, ’99, 22,931 hrs ..............................................$32,500Cat 980C, ’86, 7216 hrs ..................................................$59,000Komatsu WA200-5, ’05, 617 hrs ....................................$97,500Komatsu WA200-5L, ’07, 1,706 hrs................................$99,500Komatsu WA250PT-5L, ’05, 3,352 hrs..........................$109,500Komatsu WA320-6, ’08, 3961 hrs ................................$126,500Komatsu WA380-5, ‘06, 4965 hrs ................................$132,500Komatsu WA400-5L, ’04, 7,169 hrs................................$94,500Komatsu WA450-6, ’07, 7,355 hrs................................$196,500
Deere 548E, ’91, 15,300 hrs ..........................................$32,000Franklin 3000/Stroke Head, ’92........................................$8,500Puma 409 Forwarder, ’10, 1900 hrs ............................$155,000Timbco 415D/Risley, ’00, 8,629 hrs ............................$120,000Valmet 415EX/380, ’07, 5275 hrs ................................$184,000Valmet 415EX/Rolly II, ’05, 10,092 hrs ........................$145,000Valmet 840.3/8, ’06, 9,592 hrs ....................................$180,000Valmet 911C/965 Head, ’97............................................$35,000
Atlas Copco ROC F9-11, ’10 ............................................$CALL
Austin Western Super 500 ................................................$7,500EXCAVATORS
WHEEL LOADERS
FORESTRY
DOZERS
SHREDDERS, TROMMELS
PAVING
MILLING
BACKHOE LOADER
OFF ROAD TRUCKS
AIR CURTIN DESTRUCTORS
CRUSHING, SCREENING
COMPACTION SKID STEER
ROCK DRILLS
GRADERS
15 Roland Branch Locations in IL, IN, MI, MO, and WI
VISIT
ROLAND MACHINERY.COM
Call Jay Germann (217) 789-7711 • Email: [email protected]
Komatsu D65PX-15EO, ’08, 5,372 hrs ..$127,500 Komatsu WB140-2N, ’04, 2,805 hrs ........$27,500
Komatsu PC400LC-7, ’04, 12,499 hrs ....$84,500 Cat 928G, ’99, 22,931 hrs........................$32,500
Financing Available for Qualified Buyers
Quality Used Equipment...with support to back it up
Page 6 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CX130 Excavator
$410/Day, $1,230/Week, $3,690/Month
CX240 Excavator
$700/Day, $2,100/Week, $6,300/Month
CX210 Excavator
$580/Day, $1,740/Week, $5,220/Month
CX460 Excavator
$1,235/Day, $3,705/Week, $11,115/Month
CX160 Excavator
$475/Day, $1,425/Week, $4,275/Month
CX330 Excavator
$875/Day, $2,625/Week, $7,875/Month
CX225 Excavator
$755/ Day, $2,265/Week, $6,795/Month
Excavator Rental Specials
Rent Today!
Clean, reliable equipment Competitive rates Rent by the day, week, or month Delivered to your job site
McCannOnline.com
IllinoisAddison
630-627-0000
Bolingbrook*630-739-7770
Chicago312-942-9200
Crestwood708-597-3110
McHenry*815-385-0420
Wauconda847-526-9444
IndianaSchererville*219-865-6545
* Case authorized dealer location
Serving the Constructor ®
2003 Case 40XT, s/n JAF0387813, 850 Hrs,ROPS w/Soft Cab, Heater, 10x16.5 Tires,60” Bkt ............................................$14,900
2006 Case CX330, s/n N6SAP7025, 5100Hrs, Cab w/Heat/AC, Boom 21’2”, Arm13’3”, 31.5” -3-Bar Steel Shoes, ControlSelector Valve, Kent Coupler ........$130,000
1994 Case 721B, s/n JEE0039571, 6250Hrs, Cab w/Heat, Pro 1000 ACS Couplerw/2.75 Yd Bkt..................................$38,000
2005 Case 435, s/n N5M400417, 2600 Hrs,ROPS, Two Speed, Manual Coupler, MasterDisconnect, Grid Heater ..................$17,500
2004 Takeuchi TL130, s/n 21302831, 4500Hrs, ROPS, Tak Controls, 67” Smooth Bkt ..........................................................$15,500
1998 Case 590SL, s/n JJG0210709, 8150Hrs, Cab w/Heat, 2L Controls, Ext Hoe, RideControl, 24” Trench Bkt, 93” Front Bkt ................................................................$29,200
2003 Case 621D, s/n JEE0135031, 5100Hrs, Cab w/Heat and AC, JRB Coupler,2.5Yd 4-in-1 Bkt, Ride Control ........$69,000
2008 Ausa Dumper, s/n 09259426, 110 Hrs,1.37 Cu Yrd Dumper, 13 Hp Hatz Diesel,2WD ..................................................$7,000
Mark Kruepke • (630) 739-7770Bolingbrook, IL
Contact us at [email protected]
View our complete Used & “Like New” inventoryat McCannOnline.com
McCann Rents a full line of heavy and light constructionequipment. Call us today to supply your next rental.
CALL DOUG OR SAM(866) 485-7180WWW.RBUSED.COM
STARE Q U I P M E N T
LT D .
Call Sales 515-283-2215 • 800-352-54011401 2nd Ave • Des Moines, IA 50314
�CONSTRUCTION EQUIPMENT & SUPPLIESSINCE 1968
CHECK OUT OUR WEBSITE: www.starequip.comDes Moines • Ames • Cedar Rapids • Waterloo
2009 Mustang 2700VItem #: 04102223131, 495 Hrs, Turbo engine, 2speed, hand/foot controls, auxiliary hydraulics,power multi-tach, block heater, 2,700# lift capacity,looks like new $34,995
2008 Mustang 2054TUCItem #: 009332, 1985 Hrs, 47hp diesel with cab,heat, hand & foot controls, one owner, very clean,$18,995
1986 Mustang 442Item #: 6419222308, 5252 Hrs, clean unit, ready,hand & foot boom cntrl, Kubota dsl eng, $6,995
USED SKID STEER BARGAINS
1995 Mustang 960TItem #: 63312223102, 3278 Hrs, 60hp Isuzu dsleng, thru shop & ready to work, cab w/ heat, $8,495
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 7
Please Contact Bob Williams or Jeff Speer 11200 W Silver Spring Rd. Milwaukee, WI 53225
800/353-1944 414/461-9100 www.FABCO.comOutside WI & Upper Michigan Within WI & Upper Michigan Hundreds of machines. Listings updated daily.
2001 Cat 345BL II..................................$78,000S/N AGS00921, 13,744 hours, EROPS, coupler,
GP-bucket, cylinders good, u/c good
Cat 426C ................................................$31,500S/N 6XN03727, 5174 Hrs, EROPS, E-Stick,
4x4, 24” Bkt, Tires Good
1996 Komatsu D41E-6 ..........................$24,000S/N B20077, 4238 Hrs, OROPS, PAT Blade,
U/C Fair
1998 Cat IT28G......................................$44,500S/N 8CR01529, 16,143 hours, EROPS, std differentials, bucket, tires 50%
1979 Cat 631D ......................................$45,100S/N 24W02603, 9284 hours, OROPS, tires fair
2006 Cat 966H ....................................$197,500S/N A6G00225, 7435 hours, EROPS, A/C, GP-bkt,
tires good, engine rebuilt at 7422 hours
2001 Bobcat T190 ................................$15,5003001 Hrs, OROPS, Manual Coupler, Aux Hydraulics, 72” Bkt, U/C at 50%
2006 Cat D5KLGP..................................$99,000S/N YYY00151, 1504 hrs, EROPS, A/C,
26” tracks, blade
1970 Cat 920 ..........................................$17,500S/N 62K01852, 5362 hours, EROPS, bucket,
snow plus tires-good, runs good
1989 Cat 621E........................................$37,500S/N 2PD00725, 16603 hours, tires good to fair,
eng & trans rebuilt at 11,100 hrs, hitch rebuilt at 10,148 hrs
1998 Hyundai 320LC-3 ........................$19,500S/N 10052, 10,150 Hrs, EROPS, Aux Hyd, Hyd
Coupler, U/C Good, Buckets 36” & 48”
1997 Cat 950F II ....................................$57,500S/N 5SK02946, 26,697 Hrs, EROPS, Coupler,
Bucket, Tires Very Good
2007 Cat D5GLGP ................................$72,500S/N RKG03458, 3678 Hrs, EROPS, A/C, PAT Blade,
Joystick Steer, Drawbar, U/C Good
2011 Kleemann MC110Z....................$550,000S/N K0040240, 380 Hrs, Track Mounted, 300 TPH,
44”x28” Inlet
2002 Case 70XT ....................................$17,000S/N JAF0351777, 1802 Hrs, EROPS, Heat,
Aux. Hydraulics, Manual Coupler, 74” LM Bkt,Good Flexport Tires
1968 Cat 824B ......................................$19,500S/N 36H00658, OROPS, S blade,
sheeps foot pads good, engine rebuilt in 2009
Page 8 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
USED EQUIPMENTAuthorized Bobcat® DealerBobcat 440 ................Starting at $4,500Bobcat 463’s ..............Starting at $8,000Bobcat 542B ..............Starting at $6,900Bobcat 642 ..............................$7,500Bobcat 642B ............................$8,500Bobcat 743 ................Starting at $8,000Bobcat 751 ......Several Starting at $9,900Bobcat 753 ..............Starting at $10,000Bobcat 763F, Series, Open Cab ....$11,500
Bobcat 773G, With Heat ............$15,900Bobcat 843, Heated Cab ............$10,000Bobcat 853’s ............Starting at $11,000Bobcat 863, With Heat ..............$12,900Bobcat 863G ............................14,900Bobcat 873 ............................$17,900Bobcat S130, 2006, Heated Cab ......CALLBobcat S185s, With Heat and Air, 500Hours to 5000 Hours....Starting at $14,900Bobcat S250..............Starting at $17,500
Compact Track MachinesBobcat T190’s............Starting at $17,500Bobcat T200..............Starting at $17,500Bobcat T250, Gold ......Starting at $24,500Bobcat T300..............Starting at $25,000Other BrandsGehl 4615 Skidloader, Open Canopy $8,500Mustang 2105 ............................CALLNew Holland L175........................CALLJohn Deere 250/260 Models Available....................................................CALL
ExcavatorsBobcat 331’s, Several w/Heat & Open
Canopys ..................Starting at $15,900
Bobcat 334 ................................CALL
Bobcat 337D, A/C, HT................$35,900
Bobcat 341 ..............Starting at $29,990
Bobcat 442 ....Several Starting at $45,000
Large Used Trailer Selection Starting at $1,500
Authorized Bobcat® Dealer
NEW M SERIES IN STOCK!
BobcatExcavatorsin Stock,Call forPricing
Bobcat Forestry Cutter on T320, for Rent
Largest Selection in the Midwest!
Bobcat Tractors in Stock Now! Call for Pricing.
Toolcats in Stock, Call for Pricing New Bobcat S160, Call for Pricing
U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857New Location: Farm-Rite Wilmar 1515 West Litchfield Ave. • Wilmar, MN 56201 320/235-3672
www.farmriteequip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 9
ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928
Our Greatest Assets .. Our Employees
Cat IT28G, 1998, EROPS, coupler, 3rd valve,20.5 x 25 rubber, 15K hours, work ready . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42,500Komatsu WA250-3PT, 1999, EROPS w/AC,JRB coupler, bucket, forks 20.5x25, goodcond. . . . . . . . . . . . . . . . . . . . . . . .$63,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 $79,500John Deere 624G, 1996, EROPS, quick cou-pler, GP bkt, 20.5x25 tires . . . . . . .$46,000Volvo L60E, 2005, EROPS, coupler, aux hyd,boom susp, 20.5R25, v. good . . . .$89,500
IR SD100D Pro-Pac Vibratory Compactor,1999, Hydrostatic trans 84" smooth drum,drum drive . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS,very clean . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smoothw/pad kit, ROPS . . . . . . . . . . . . . . .$62,500IR SD70D, 2000, Pro-Pac, 66" smooth drum,ROPS . . . . . . . . . . . . . . . . . . . . . . .$49,000Cat 815B, 1993, OROPS, S-Blade w/Tilt,Good Feet . . . . . . . . . . . . . . . . . . . .$68,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, goodfeet, very nice . . . . . . . . . . . . . . . .$205,000(4) Cat 825C’s, 1981-1990, EROPS, S-bladew/tilt, all work ready . . . . . . .From $79,500Multiquip MR8G Walk Behind VibratoryCompactor, 1997, Briggs & Stratton 8 HPgas engine . . . . . . . . . . . . . . . . . . . .$2,500Rammax Walk Behind Rollers, over 25 instock, lever & remote . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum &single drum, tow type . . . .$4,000 - $6,500
Case 1550, 1993, OROPS, S-Blade w/Tilt,Carco Winch, Rear Screen, P/S Trans, LowHours, Exc. . . . . . . . . . . . . . . . . . . .$55,000
Case 480 Broom Tractor, frt mounted 6'sweepster broom, ROPS . . . . . . . .$13,000Case/IH 485 Utility Tractor, 1986, Case 3 cyldsl engine, 55 gal water tank . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dslengine, 72" hydraulic broom . . . . . .$11,500Rome TRCH16 Disc, hyd offset disc, 16 ea32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,500
Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17”DBG pads . . . . . . . . . . . . . . . . . . . .$46,000
Komatsu CD60R-1 Crawler Dump Truck,1997, 360° rotation . . . . . . . . . . . .$66,000Volvo A40, 1998, 40 tons, 10991 hrs, 395hp, 8WD, 29.5R25, A/C, 29 cy cap. side-boards, tailgate (currently off work), workready . . . . . . . . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C,29.5R25, working everyday . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD,20.5R25, A/C, P/S trans, 29 cy cap., 6/06hitch rebuilt . . . . . . . . . . . . . . . . .$115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD,29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . . . . . . . . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25tires, approx 7,000 hrs, good condition . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD,26.5x25, A/C, P/S trans, working everyday onjobsites . . . . . . . . . . . . . . . . . . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD,26.5R25, A/C, P/S trans, 26 cy, workingeveryday on jobsites . . . . . . . . . . . .$89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans,works everyday . . . . . . . . . . . . . . .$122,500
(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, winches, v. good . . . . .$175,000 Ea.Cat D8N, 1991, ROPS, drawbar, S-U blade .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85,000
(2) JD 450G, 1996, wide tracks, ROPS, PATblade . . . . . . . . . . . . . . . . . . . .$39,000 Ea.
Broderson IC80-1B, 1984, 8.5 ton, Perkinsdsl, OROPS, 20’ boom,, 3500hrs, good . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500Broderson IC80-2E, 1997, 8.5 ton, 24’ boom,dual fuel, 10.00R15 tires, 3,400 hrs$21,500Grove RT58C, 1981, down cab, 18 ton r.t.,70' boom anti-two block, GM dsl, clean . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500
Cat 613C Water Wagon, 1994, 5000 gal droptank, ROPS, spray heads . . . . . . . .$49,500Cat 621F, 1996, Scraper, OROPS, 33.25x2,very good condition . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29,very nice . . . . . . . . . . . . . . . . . . . . . . .CALL
JD 490E, 1994, 9'11" stick, Aux. hydraulics,quick coupler, 6-7000 hrs, Fleet maintained . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,000Hitachi UH181, 1985, Equipped w/hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000Gradall-Hopto 300, 1968, G.M. diesel UP, onrubber, operational . . . . . . .$10,500/OFFERCat 215BLC, 1985, 7'3" stick, 28" TBG pads,10 roller U/C . . . . . . . . . . . . . . . . . $31,500Komatsu PC200 LC-6, 1996, 32" pads, 42"Bkt, long stick . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7"stick, 44" Bkt . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30"bkt, 27.6" TBG pads, work ready . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . .CALLKomatsu PC750 LC-6, 1999, 454 hp, 27”boom, 11’10” stick, 44’ DGB, aux plumbing,bucket choice, 24k ctwt . . . . . . . .$255,000Komatsu PC400 LC-6LK, 1999, 10’6” stick,JRB coupler, 31.5” TBG, ctwt removal, choiceof bkt . . . . . . . . . . . . . . . . . . . . . . .$77,500Komatsu PC400 LC-6LK, 11’1” stick, 35.5”TBG, ctwt removal, choice of bkts, workingeveryday . . . . . . . . . . . . . . . . . . . . .$97,500Komatsu PC160 LC-7KA, 2004, 24” TBGpads, JRB coupler, plumbed, 8’6” width, nice,work ready . . . . . . . . . . . . . . . . . . . . . .CALL
Volvo EC460B LC, 2003, 4600 hrs, 23’boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt,hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . .$159,000
(2) 48' Box Vans w/Liftgates, GoodCondition . . . . . . . . . . . . . . . . . . . . . . .CALL
IR 185’s, JD diesels . . . . . . . . . . . . . .CALL
Vermeer 5800 Trencher, 1997, 4 cyl dsl eng . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11,900(12) Allmand Light Plants, 2008-2010,diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . . . . . . . . . . . . . . . . . .From $5,200
Case 580L Rubber Tire Loader Backhoe,1997, OROPS, std stick, 24" bkt . . .$24,500
John Henry Drill Mtd on Cat 320N, 1994, 24'mast, Duraquip dust collection . . .$150,000
(2) Balderson Broom Attachment for Cat ITMachines, 8' wide, good condition . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Ea.
BUCKETSPC1000, 84" Digging Bucket . . . . . .$9,500Over 100 Excavator, Loader, Specialized &
Grapple Buckets in Stock-Call For Your Needs
FORKS(8) IT28F/G Forks, Balderson qc, 48"-60" pal-let style, excellent . . . . . . . . . . . . . . .$4,000(5) Cat 936/926/950 pallet forks, for aBalderson quick coupler, exc. cond . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$3,500 Ea.
Others Available CallPrices Are Negotiable - At Your
Inspection
All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.
TRUCKS & TRAILERS
CRAWLER LOADERS
OFF ROAD HAULERS
MOTOR SCRAPERS
DRILLS
ATTACHMENTS
MISCELLANEOUS
WHEEL LOADERS
HYDRAULIC EXCAVATORS
CRAWLER TRACTORS
COMPACTORS
LANDSCAPING
CRANES
SPECIALS
BACKHOES
AIR COMPRESSORS
DOZERS
Page 10 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Miller Electric Mfg. Holds Press Event at Lambeau FieldMiller Electric Mfg. Co. held a press event recently at
Lambeau Field in Green Bay, Wis., home of the Green BayPackers, and where the $140 million expansion project iscurrently under way. The primary function of the day wasintroducing the new Trailblazer welder generators, whichwere tested and used extensively at the Lambeau expansionsite. Miller staff were on hand showcasing how differentwelding technologies are used in the construction industry,specifically structural steel construction. Miller and Hobart Brothers have been named the “Official
Welding Equipment Provider of the Lambeau FieldExpansion” and have partnered with the Neenah, Wis.-basedMiron Construction to provide the construction team andironworkers with the latest in welding and heating technolo-gies, consumables, weld fume extraction equipment andwelding safety gear for the new Lambeau Field expansionproject.The expansion will be completed in 2013 and involves
substantial new construction to both end zones, including6,600 new seats in the south end zone and new high-defini-tion video boards in both end zones. Both video boards anda new viewing terrace in the north end zone will be opera-tional for the 2012 season.“People in our community, and all throughout the state of
Wisconsin, take great pride in their work and in Green BayPackers football,” said Mike Weller, president, Miller.“Working with other local companies such as MironConstruction to further build and shape one of Wisconsin’sgreatest landmarks is something we do with honor. We’reproud to be working with the Packers, Miron Construction,the ironworkers, and all of the partners involved in theLambeau Field expansion. As fans, we’re undeniably excit-ed to see the new features added to the best stadium in theNational Football League.” Miller and Hobart Brothers have worked extensively with
Miron Construction throughout the project to use both new Miller Electric Mfg. Co. held a press event recently at Lambeau Field in Green Bay, Wis., home of the Green BayPackers, and where the $140 million expansion project is currently under way.
Chris Wierschke, Miller Electric Mfg. Co., responds to questions from the mediaabout the trailblazer and Bobcat welder/generators.
Pete Klosterman, Miron Construction Co. Inc., talks about the fill welds on the sup-port beams for the south end zone scoreboard.
see LAMBEAU page 100
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 11
Milwaukee, WI1-800-236-6900Fax 414-541-1892
Wausau, WI1-800-242-7113Fax 715-675-9748
Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753
YOUR AUTHORIZED DEALER
in WISCONSIN and UPPER MICHIGAN for:
For information on our in-stock equipment, contact Lanny Peterson at:[email protected] or
mobile 1-715-574-8089 or 1-800-242-7113
AGGREGATE EQUIPMENTALLIS RT2448 PORTABLE JAW PLANT, 1993, with24”x48” Jaw, 48”x20’ Vibrating Grizzly Feeder, FrontDischarge Conveyor, Six Hydraulic Legs, Tri-AxleChassis, Cummins NT855 Diesel with Hydraulic Drivesfor Feeder & Conveyor ............................................CALLLIPPMANN MODEL T-4236 ROLL PLANT, 1995, S/N950411, 42" X 36" rubber-tire drive rolls, 64" x 16' S.D.screen, Cat 3408 diesel, rotovator and switch gear (off-plant) ........................................................................CALLPOWERSCREEN MODEL 510 WASH SPREAD, 2002, 5'x 10' 3-deck screen, Deutz diesel, includes a Graystone36" x 25' screw and (2) 30" x 45' hydraulic conveyors......................................................................................CALL
EXCAVATORSDEMAG H95 MASS EXCAVATOR, Powered by a Cat3408 Diesel, with a 24’7” Gooseneck Boom, and a10’8” Stick with 43’6” Reach and 25’ Digging Depth,7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb.Working Weight, 5800 Frame Hours and RecentEngine Rebuild ............................................$125,000LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVA-TOR, Powered by a 471 HP Liebherr D9408TI Diesel,33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cuyd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Padsadn Removable Sideframes, Approx. 190,000 Lb.Working Weight..................................................CALL
LIEBHERR R954C HD “LITRONIC” CRAWLER EXCA-VATOR, (Several 2006-2007 Models Available) withVarious Boom/Stick Combinations and BucketsAvailable, 326HP Liebherr D936L Six-Cyl. Tier 3Diesels, Hydraulically Removable Counterweights,124,000 to 130,000 Lb. Working Weights..........CALL
CRANESGROVE RT760 60 TON CAPACITY ROUGH TERRAINCRANE, 1993, with Cat Diesel, 110’ Power-PinnedBoom, 32’ to 56’ Telescopic Offsettable Swingaway,Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work....................................................................$179,900GROVE RT875E 75 TON ROUGH TERRAIN CRANE,2006, 41’ to 128’ boom, 33’ to 56’ bi-fold swingaway,Model 30 main & auxiliary hoists, 29.5 x 25 tires, 3-position outriggers ............................................CALLMANITOWOC 777 SII 200 TON CRAWLER CRANE,2000, Cummins, 220' main boom, 40' fixed jib, thirddrum, 7800 hours ..............................................CALLMANITOWOC 11000 100 TON CAPACITY CRAWLERCRANE, 2008, (100 Ton capacity @ a 14' radius), witha 332 hp Hino 6 cylinder Tier III diesel, 200' mainboom, 60' jib, LMI, 36” crawler shoes, approximateworking weight of 218,000 lbs. with 74,970 lb. 5-piece counterweight, counterweight and side-frameremoval systems. 3020 hours ............................CALL
GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS
• LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/
JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAGCRUSHERS • MANITOWOC CRANES
MANITOWOC 11000 CRAWLER CRANE GROVE RT760 ROUGH TERRAIN CRANE
Large Selection of New & Used Equipment in Stock.
View us at:www.amstate.com
Contact Marty in Illinois1-800-307-0221
Photos & Detail Descriptions view: www.finkbinerequipment.com
CEDAR RAPIDS CR362L - ‘08 • Electric 8-16’ screed, Top Con Syst V, approx 1563hrs ............................................................................................................$177,500CEDAR RAPIDS CR662RM - ‘10 • Mat. Transfer Vehicle w/ Hopper Insert, 1200hrs ..................................................................................................................$PORCEDAR RAPIDS CR662RM - ‘11 • Mat. Transfer Vehicle w/Hopper Insert, 750 Hrs................................................................................................................$377,198MIDLAND SPR-6 - ‘11 • RH Discharge Widener to 6’, 320 Hrs ..................$86,117MIDLAND SPR-6 - ‘11 • RH Discharge Widener to 6’, 145 Hrs ......................$POR
CALL items may be on rent causing pricing and hours to vary.
ROADTEC RX400 - ‘11 • 48” Cut, 4 Track, Front Loading, Mill w/650 Hrs ..$340,183WIRTGEN W50 - ‘11 • 20” Cut, 3 Wheel, Rear Discharge Mill w/350 Hrs ......$PORWIRTGEN W500 - ‘02 • 20” Width, 3 Wheel Mill w/ Load-Out Conveyor, 1600 Hrs..................................................................................................................$82,500
SAKAI GW750 - ‘11 • Vibratory Pneumatic, 79’ Wide, 320 Hrs ................$109,900SAKAI R2H-2 - ‘10 • 3 Wheel Static Roller, 83” Wide Coverage, 350PLI, 450 Hrs ....................................................................................................................$85,000SAKAI SW800II - '09 • 67" Dbl Drm Vib, 1170 hrs ....................................$55,000SAKAI SW800II - ‘11 • 67” Dbl Drm Vib, w/remaining standard and EPTW, 170 hrs ......................................................................................................$89,832SAKAI SW850-2 - ‘10 • 79” Dbl Drm Vib w/balance of Std warranty and EPTW,541 hrs ......................................................................................................$87,500
GRADALL XL4100II - ‘04 • Trk Mtd. Exc. w/2 Buckets, 5925 Hrs ............$129,950
MILLING MACHINES
ROLLERS
PAVERS / ROAD WIDENERS
EXCAVATORS
Page 12 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 13
Bob Miller636-680-1594
1 Fabick Drive, Fenton, MO 63026www.fabickcat.com
“To Ever Serve Our Customers Better”
USED EQUIPMENT2005 CAT 950G SERIES II
S/N AXX01814, 5,620 Hrs, AC, 4.25 CYDGP ....................................................$150,000
2006 CAT D6N XL
S/N AKM02149, 3,350 Hrs, Cab, AC, AroReady, vpat ..................................$155,000
2008 CAT 928HZ
S/N CXK00407, 640 Hrs, 2.6 CYD GP Bkt,AC..................................................$137,500
2006 CAT D6RXL
S/N GJB00601, 6529 Hrs, A/C, RipperHydraulics, SU Blade, 22” Tracks $175,000
2008 CAT 315DL
S/N CJN00360, 2,317 Hrs, 10’2” Stick, 24”Pads ..............................................$133,500
2007 Cat 272C
S/N RED00560, 742 Hrs, AC, Hydr Cplr,Smooth Bkt, New Tires ..................$46,900
2007 CAT 320DL
S/N PHX350, 3,003 Hrs, Aux Hyds,Coupler, 48” Bkt............................$160,000
2003 CAT D6RXL
S/N AAX00175, 3731 Hrs, A/C, RipperHydraulics, 6SU Blade, Suspension Seat ............................................................$190,000
2006 CAT 315CL
S/N CJC3818 3,405 Hrs, Aux Hyds, 36”Bkt, 24” Pads ..................................$95,000
2004 CAT 980G II
S/N AXG01090, 8619 Hrs, AC, RideControl, Good Tires, GP Bkt........$225,000
2007 CAT 980H
S/N JMS02662, 8,098 Hrs, AC, RideControl, 8.0 cyd gp ......................$295,000
2008 Cat 928HZ
S/N CXK00529, 1,976 Hrs, AC, 2.9 CYDGP, limited slip front axle ............$137,500
2005 CAT 963C
S/N BBD01527, 5,796 Hrs, AC, Cleaned &Painted, GP Bkt, good u/c ............$87,500
2008 CAT 320DL
S/N PHX00846, 4,400 Hrs, 42” Bkt,Hydraulic Thumb..........................$149,000
2010 MORBARK 4600XL
400 Hrs, Cat C27 Engine, Auto ReversingFan, Magnetic End Pully..............$575,000
2003 CAT 420D
S/N FDP09264, 5108 Hrs, Cab, E-Stick,Awd Hydrs, Ride Control, 30” Bkt, NewFront Tires ......................................$46,500
Page 14 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Innovation Demonstrated at Caterpillar Press EventCaterpillar introduced several new tech-
nologies to national and international mediaon Oct. 15 to 17 at its facilities in Peoria, Ill.These technologies included a new morefuel-efficient wheel loader, a hybrid excava-tor and Tier IV Final.The event included a tour of the new
Caterpillar Visitor Center. Caterpillar invest-ed more than $52 million into the 50,000 sq.ft. facility and the new Peoria RiverfrontMuseum projects, which achieved LEEDGold status.The new visitor’s center allows for self-
guided journeys of Caterpillar’s products,history, achievements and opportunitiesthrough interactive displays and exhibits.Visitors have the power to unleash theirinner engineer and design their very own Catmachine, or hop onto a simulator and seefirst-hand what it’s like to operate aCaterpillar excavator, dozer or loader. A her-itage gallery displays a Caterpillar D8 tractorand informs of the company’s milestones,while the Caterpillar Jobsite Theater pro-motes job opportunities at the company. The new center also features the 797F
Mining Truck Theatre, which is a 62-seattheater that was converted from a working24 ft.-tall (7.3 m), 400-ton (362.9 t) Cat 797Fmining truck. The 797F is approximately thesize of a two-and-a-half-story house, cover-ing more than 4,500 sq. ft. (418 sq m).Caterpillar had to create new wheels for thetruck-converted theater, since the tires on the797F weighed too much (11,680 lbs [5,298kg]).The Next Generation Is Here, the title
Caterpillar gave to the event, refers to theidea that Caterpillar is bringing the future tothe present.
Cat 966 K XEThe Cat 966K XE wheel loader; is pow-
ered by a Cat C9.3 Acert diesel engine,delivering a peak net rating of (290 hp) 220kW. It incorporates a high-pressure commonrail injection system for a clean, efficientburn. The Cat clean emissions module,which incorporates a diesel oxidation cata-lyst, a diesel particulate filter and the Catregeneration system, functions automatical-ly without interrupting the machine’s work-ing cycle.The engine can be controlled to operate
more efficiently over a wide range of condi-tions. During deceleration, machine momen-tum can be recovered as free energy topower implements or the cooling fan, whilesignificantly lower working engine speedsresult in reduced soot build-up for longerregeneration intervals, cutting fuel use fur-ther.The 966K XE is equipped with an
advanced powertrain system, which deliversup to a 25 percent fuel efficiency, according
to the company. The 966K XE has beenengineered to deliver efficiency by utilizingan integrated Cat continuously variabletransmission system. A hydraulic pump andmotor (variator unit), allows for a smoothand continuous gear ratio change betweenengine speed and machine speed. The varia-tor provides this ratio flexibility while reduc-ing the heat load generated by the drive trainwhen the machine is digging, pushing andclimbing under heavy load. The continuous-ly variable gear ratio of the variator alsoenables the engine to run at a more efficientoperating range independent of machineground speed.Power is transmitted through the variator
unit (versatile gear ratio) as well as a parallelmechanical gear path (highest efficiency).Power through the variator and mechanicalpaths are combined through a series of plan-etary gear sets in order to maximize thetransmission efficiency over a wide range ofoperating conditions. Media demoed this machine in
Caterpillar’s two-acre indoor provingground.
Cat 336E H The Cat 336E H uses a new hydraulic
hybrid technology developed by Caterpillar. “A hybrid is independent of any particular
technology; it doesn’t have to be electric,”said Ken Gray, global product manager oflarge hydraulic excavators of Caterpillar’sexcavation division. “Caterpillar has developed, built, and test-
ed electric hybrid excavators, but, until now,
we had not found a hybrid approach thatwould actually lower our customers’ owningand operating costs. Large excavators oper-ate in high-production applications in whichfuel is a very significant operating cost forour customers. So, the 336E H, the hybridversion of our workhorse 336E, is ideal for
The Cat 336E H uses a method of storingenergy for later use. The company chosea hydraulic hybrid over an electricalone since the technology decreasedoverall operating costs.
One member of the media tries the virtual 336E H in “The Cave.”
see PEORIA page 100
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 15
JD 800CLC, 14' 5" Arm,36" Pads, #N4385 ..............................$450,000
JD 600CLC w/ GenesisGXP1200R Shear,#U10798 ........$500,000
NPK Hammers, AllSizes for All Makes.Inspected and WellMaintained, GH4-GH18
JD 770D, Tall Cab, 12’ Blade, Warranty,#U11496 ........$152,000
JD 850J, 24” Pads,128” Blade, #U11325 ..........................$184,000
Fiat 65E, 110HP, BladePitch, 252 Hrs, #A7104......................$108,000
JD 330CLC, 60’ SuperLong Front, #U10682 ..........................$129,000
JD 9520 ScraperSpecial, #U10292 ..............................$129,000
JD 310SG, #N4288,Cab, Air, Aux Hyd ..................................$48,000
Bomag BW180AD, 71"Drum, #A4597 ......................................$38,000
JD 750J LGP, 156”Blade, #U11482 ..................................$175,000
JD 450DLC, 12’10”Arm, 36” Pads, CWRD,#U11280 ........$355,000
JD 644E, CompleteFactory Remanufacture............Call for Details
JD 544J, Cab, Air, GPBkt, #U11303..$106,000
JD 700J, LGP, 30” Pads,132” Blade, Winch,#U11492 ........$179,000
Page 16 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
LEXINGTON, KY2180 Old Frankfort Pike
P.O. Box 11520Lexington, KY 40510
859-254-64431-800-432-0913
CORBIN, KY 828 W. Cumberland Gap Pkwy.
Corbin, KY 40701606-528-0700
1-800-274-9457
PRESTONSBURG, KY2124 Watergap Road
Prestonsburg, KY 41653606-874-8036
1-800-955-9457
www.wilsonequipment.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 17
CASE 420-3 RUBBER TIRE SKID STEER, 69HP, Cab w/ Heat & AC, No Door on Cab, 2Speed Ground Drive, Auxiliary Hydraulics, GPBucket, NEW Tires ..............................$19,500
10' PRO-TECH IS10S SNOW PUSHER, FitsSkid Steer 46 HP and Up, 10-Yard Capacity,Very Good Condition ............................$2,250
CAT D8N HYDRAULIC SU DOZER W/TILT, 285HP, Cab w/Heat & AC, Powershift, DifferentialSteering, VG UC w/26” Pads ..............$97,500
WOODCHUCK WC 17 PORTABLE BRUSHCHIPPER, 12” Throat, 40” Disc, Good 9.5x16Good Tires ............................................$9,500
CAT 950G 4-1/2 YARD ARTICULATED 4WDLOADER, 180 HP, Cab w/ Heat & AC, ECPCTransmission, GP Bucket, Good Tires $72,500
16' PRO-TECH SP16L SNOW PUSHER, ForWheel Loader 3-Yard and Up, 21 Yard Capacity,Ver Good Condition ..............................$3,900
CASE 580 SUPER M 4X4 1-YARD LOADERBACKHOE, 73 HP, Canopy, Extendahoe, GP Bkt,36” Hoe Bkt, Good Tires........................$32,500
CAT 330CL 2-3/4 YARD HYDRAULIC EXCAVA-TOR, 247 HP C-9 Diesel, Cab w/Heat & AC,12’9” Stick, 74” Ditching Bkt w/Bolt-on CuttingEdge, Very Good U/C w/34” Pads ....$102,000
CAT D6H SERIES II HYDRAULIC SU DOZERW/TILT, 165 HP, NEW Cab w/Heat & AC,Sweeps, Powershift, Differential Steer, VG UCw/NEW S&L Rail Groups & 24” Pads $72,500
CAT 312CL 0.98-YARD HYDRAULIC EXCAVA-TOR, 90 HP, Cab w/Heat, 9’9” Stick, 24” Bktw/Teeth, VG UC w/23.5” Pads ............$58,500
‘07 DIERZEN DOMINATOR 22’ TANDEM AXLEQUARTER FRAME END DUMP TRAILER, DualFunction Tail Gate, Manual Tarp, Aluminum BuddWheels ..................................................$24,500
BROCE RC-350 SELF-PROPELLED PAVEMENTBROOM, 76 HP, Cab w/ Heat & AC, HydrostaticTransmission, 8' Broom, Water System, GoodTires ....................................................$21,500
12’ REMCO ACW-16-32 OFFSET DISK, 28”Serrated Blades, 18” Spacing, HydraulicTransport Wheel...3 in Stock ........$14,500 Ea.
‘13 WITZCO CHALLENGER RG-35, 35-TonTandem Axle Ground Bearing Lowboy, 24’Loadwell, Self-Contained, LoPro Tires, BuddWheels, ABS........$32,100 Price Includes FET
CAT 950F II ARTICULATED 4-YARD 4 WHEELDRIVE LOADER, 170 HP, Cab w/ Heat & AC,REBUILT Powershift Transmission, GP Bucket,VG ......................................................$62,000
CONTACT815-968-0818
www.adamsequipment.com
For our full inventory, please visit www.adamsequipment.com
2001 FORD F550 XL SD DUMP TRUCK, 7.3 V-8 Diesel, AC, Automatic, 9' Dump Box, BehindCab & Side Tool Boxes, 6K Front/13.5K RearAxle, GVWR 17,500 lbs ......................$15,500
Page 18 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact us today.
You asked. We delivered. Our D-SeriesSkid Steers are loaded with customer-recommended enhancements, like largeroperator stations, quiet pressurized cabs with best-in-class visibility, andcurved-glass swing-out doors. D-Series innovations include an exclusive coolingsystem with available hydraulically drivenvariable-speed fan that reverses to clearcore-clogging buildup. Plus options suchas electrohydraulic joysticks, variableboom and bucket speed settings, andmore than 100 attachments to let you take on more tasks. Packed full of best-in-class productivity and uptime-enhancingfeatures, the D-Series are destined to become owner and operator favorites. Ask for a demo today.
Offer ends 12/31/2012. Some restrictions apply; other special rates and terms may be available, so see your dealer for details and other financing options.Subject to approved credit with John Deere Financial.
Scharber & SonsRogers, MN
Randy Thorstad612-840-3464
Isanti County EquipmentIsanti, MN
Jesse Kraft763-444-8873
www.mnequipmentsolutions.com
RDO Equipment Co.Burnsville, MN
Matt Dull952-890-8880
The difference is in the D-tails.
0% for 48 Monthsor .9% for 60 MonthsExpires Dec. 31st
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 19
(262) 781-3770
SEE PHOTOS OF OUR COMPLETE INVENTORY AT WWW.ARINGEQUIPMENT.COM13001 W. Silver Spring Drive
Butler, WI 53007
Jim KingMobile: (414) 530-0592
Fax: (262) 781-5053Email: [email protected]
WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.
2005 Volvo L220E, Cab, A/C, Radio, AdditionalWork Lights, Return to Dig, Boom Suspension,Engine Block Heater, 7cy Bucket w/BOE,29.5R25 Tires, Recent Transmission..$135,000
2003 Volvo EC360B LC - 12' 10"' ARM;AC; RADIO; 36" PADS; 70% UC; 54" P/OBUCKET; PILOT PATTERN CONTROLCHANGE ..................................$115,000
2009 Volvo ECR145CL - A/C, Radiow/CD, 24" Pads, 8'2" Stick,Hammer/Shear Piping, Q/C Piping, PilotPattern Control Changer ..................$Call
2002 Volvo A40D - A/C, CONTRONICS,29.5R25 TIRES..........................$175,000
2003 Volvo A40D - A/C, CONTRONICS,29.5R25 TIRES..........................$256,000
2004 Volvo A40D - AC, CONTRONICS,29.5-25 TIRES, TAILGATE ......$240,000
2007 Volvo A40D - A/C, CONTRONICS,29.5R25 TIRES, TEFLON LINERS ............................................................$339,000
2005 Volvo A40D - AC, CONTRONICS,29.5R25 TIRES, TAILGATE ......$200,000
2009 Volvo L120F - Cab, A/C, Radio w/CD,Heated Suspension Seat, Boom Suspension, HydAttachment Bracket, Reversible Cooling Fan, WorkLights, Reverse Alarm, Front Frame Steps, RearFenders w/Guard Rails, 113” 4.4cy H/O STE Bucketw/BOE, 23.5R25 Tires ............................$195,000
2008 Volvo L70F - Cab, A/C, Radio w/CD,Front Work Lights, Boom Suspension, 3rd Function,Hydraulic Attachment Bracket, Reversible CoolingFan, Front Frame Footsteps, Right Hand Side Stepsw/Lockable Toolbox, Engine Block Heater, DymaxHydraulic Q/C, Dymax 4cy High Tip Bucket w/BOE,20.5R25 Goodyear RL-2+ Tires 50% ......$110,000
2011 Volvo A40F – 1262 Hrs, Volvo D16H(476hp) Tier 4i Engine, Heated Air Suspension Seatw/Armrest, Front Work Lights, Rear View ColorCamera, Electric Hood Opener, Delayed EngineShutdown, Engine Block Heater, CareTrack TelematicsSystem, 29.5R25 Michelin XADN Tires....$480,000
2011 Volvo A40F – 1274 Hrs, Volvo D16H(476hp) Tier 4i Engine, Heated Air Suspension Seatw/Armrest, Front Work Lights, Rear View ColorCamera, Electric Hood Opener, Delayed EngineShutdown, Engine Block Heater, CareTrack TelematicsSystem, 29.5R25 Michelin XADN Tires…$480,000
2011 Volvo A40F – 1189 Hrs, Volvo D16H(476hp) Tier 4i Engine, Heated Air Suspension Seatw/Armrest, Front Work Lights, Rear View ColorCamera, Electric Hood Opener, Delayed EngineShutdown, Engine Block Heater, CareTrack TelematicsSystem, 29.5R25 Michelin XADN Tires…$480,000
2008 Volvo EC290C LC - A/C, 36" Pads,12'2" Stick, Aux Hyd., Q/C Piping,Rotator Piping, Pilot Pattern Control,Block Heater..............................$157,000
2005 Volvo L90E - 11,824 hrs, Cab, A/C,Radio, Work Lights, Boom Suspension,Hydraulic Attachment Bracket, 3.5cyBucket w/BOE, 20.5R25 Tires ........$Call
2005 Volvo L70E - Cab, A/C, Contronics,Hyd Attachment Bracket, 20.5R25 Tires,2.5CY Bucket w/BOE ................$112,500
Page 20 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ervin Equipment Expands to Serve Expanding Customer BaseErvin Equipment Inc., a dealer of Wabash
National trailers and supplier of new andpre-owned transportation equipment, hasexpanded its facility and staff in Toledo, Ill.,to pursue opportunities in new markets andensure a continuation of its quality customerservice. The company, which recently branched
into the oil and gas industry, is furtherexpanding into markets such as trucks andadditional dry van outlets. To adapt to theareas of growth, Ervin is hiring 40 newemployees and added approximately 8,000sq. ft. to its main facility.Because a consultative sales approach is a
hallmark of Ervin Equipment, 30 of the 40
employees are in the sales department. Thisenhanced staff will allow Ervin to continueto source, purchase and track the mostsought-after equipment. The expanded salesteam also will enable each sales rep to focuson providing the highest level of customerservice and matching each customer’s needswith the ideal equipment package. In addi-
tion to the elevated level of service, theexpanded team allows for more direct mar-ket focus so specific representatives canwork more closely with each industry seg-ment. This ensures a knowledgeable, quali-fied team that can respond to market specif-ic questions and needs. “We’ve been involved in a variety of
industries on a smaller scale for quite sometime,” said Jeff Weber, vice president ofsales and marketing at Ervin Equipment.“This expansion of our sales team provides adedicated staff to each specific industry toensure we provide customers with the mostknowledgeable team to guide their buyingdecisions.” In addition to the sales staff, Ervin is
adding 10 employees to the support team.“We are adding additional staff to remain incontact with our customers and be surethey’re getting the best service possible,”Weber said. “We feel adding extra supportprofessionals will ensure our customersneeds are being met.”Ervin Equipment has been serving the
transportation industry for more than 30years, offering customers a wide variety ofnew and used semi-trailers, refers, dry vans,lowboys and most recently tankers.For more information, visit www.ervi-
nusa.com.
To adapt to the areas of growth, Ervin is hiring 40 newemployees and added approximately 8,000 sq. ft. to its mainfacility.
Ervin Equipment Inc. expanded its facility and staff in Toledo,Ill., to pursue opportunities in new markets and ensure a con-tinuation of its quality customer service.
Raymond Central Public Schools TourMurphy Tractor & Equipment Co. Inc.Murphy Tractor & Equipment Co., Inc., had some unique
visitors at their Lincoln, Neb., store branch, located at 6100Arbor Road, Sept. 14. Jay Henderson, industrial tech instruc-tor, of Raymond Central Public Schools, Raymond, Neb.,and more than 30 high school students toured various busi-nesses in the area, where they were given a first-hand viewof daily operations. The students had the opportunity to learnmore about a wide-range of departments and job functions. The industrial tech students are members of SkillsUSA,
an organization with a goal to make certain America has a
savvy and well-informed workforce. “It was encouraging tosee students intrigued by vocational trades, and the variousaspects of our business at Murphy Tractor. To have a largegroup with mixed interests in-house, and teach them moreabout the new technology John Deere has to offer, was excit-ing. Knowing these knowledgeable students plan to pursuehigher levels of education and are gaining new perspectivesmade us proud to help support their field day,” said DougJacobson, service manger.For more information, visit www.murphytractor.com.
(L-R): Sawyer Lorenzen, Steven Davidson, CodyKinning and James Kottas crouch inside the bucket ofa John Deere loader.
(L-R): Raymond Central Industrial Tech studentsDavid Borchers, Thomas Wilson, Jared Sterns and JDenjoy their field trip to Murphy Track & Equipment Co.
(L-R): Matt Grimes, Jacob Huck, Jack Jindra, CoryStorm and Josh Kothe pose with John Deere equip-ment.
Doug Jacobson, service manager (far R), discussesdetails of the service department with RaymondCentral students.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 21
1991 Hitachi EX270LC; #81260, Hyd Thumb,31.5” Tracks, 36” Bkt ............................$54,500
1994 Komatsu PC250LC-6; #91634, 60’ LongFront, 31.5” Tracks, 6100 Hrs ..............$69,500
2008 Komatsu D51EX-22; #81780, Cab/AC, 20”Tracks, 2400 Hrs ................................$119,500
2007 Cat 953C; #91597, Cab/AC, GP Bkt,Single-Lever, 2600 Hrs..........................$98,500
2008 Komatsu PC78MR-6; #81592, Cab/AC,Roadliners, Aux Hyd, 1600 Hrs ............$79,500
2004 Komatsu WA250-5; #81381, Cab/AC, QC,ECSS, 4600 Hrs ....................................$89,500
2004 Komatsu D65EX-15; #80803, Cab/AC, 20”Tracks, Drawbar, 3550 Hrs..................$149,500
2000 Cat 953C; #80404, OROPS, Double-Lever,4450 Hrs ..............................................$69,500
2003 Komatsu PC220LC-7; #81546, Cab/AC,31.5” Tracks, 10’ Arm, 8200 Hrs ..........$89,500
2003 Komatsu WA180-3; #91673, Cab/AC, JRBQC/Bkt/Forks, 8800 Hrs ........................$47,500
1997 Komatsu D65PX-12; #91639, OROPS,36” Tracks, Straight Blade, 5350 Hrs ....$49,500
2005 IR SD77DX; #80788, OROPS, 66”Smooth Drum, 2450 Hrs ......................$56,500
Call Doug / Sam:(866) 485-7180
Page 22 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
39176 County Road 186 • Sauk Centre, MN 56378
320-351-0268Fax: 320-351-4268
Visit our Web Site: www.central-equipment.com
SALES • SERVICE • RENTALSFinancing Available • Delivery Available
Used 2007 Cat TL 943 roughterrain forklift. Enclosed caband heat. Outriggers. 4WD,Diesel. $62,000
2001 Genie S125 boom lift,diesel, 4wd, 131ft workingheight. Sell price $71,000
2010 JLG 260MRT. Dual fuel,outriggers and extension deck.815 hours. SLR169. $29,000
Komatsu industrial forklift.989 hours, 188" lift height withside shift. MFL 176. $18,900
Used 1999 Skytrak 8042,open rops. 8000# capacity, 42ftreach.TFL 368. $24,900
2005 JLG 800S boom lift,diesel, 4wd 8ft basket. ML155$75,000
2007 Ingersoll Rand VR-1044C. 10,000 lb lift. 44' reach,wide carriage, auxiliaryhydraulics TFL 345. $47,000
1998 JLG 40H Boom Lift,Dual Fuel, 4718 Hrs. $13,500
1995 Grove MZ116 Boom Lift$19,900
2003 JLG 450AJ, diesel, 4WD,51 ft working height. ML208.$29,900
Used 2005 Skyjack 3219 electric scissor. Non-markingtires, extension deck, 19ft platform ht,25ft working height. 10 Available.Price Starting at $5,500
Used 2004 JLG 3394 withoutriggers. 4wd, diesel.SLR305 $19,000
For Sales Call Dan @ 320-212-4367 For Parts Call Ryan @ 320-351-0268
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 23
3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302
4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710
106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470
Mid Country Machinery(800) 206-5936
www.midcountrymachinery.com
2012 Kobelco SK350LC-9, EROPS, 2 units available $225,000
2012 Kobelco SK260, EROPS, LR unit, 298 Hrs $210,000
2012 Kobelco SK210, EROPS, 7 units available $168,500
2012 Kobelco 140SR, EROPS, Tier 3, Pad 23.5” $126,500
2012 Kobelco ED150R, EROPS, A/C, Heat $155,000
2012 Kobelco SK170-9, EROPS, A/C, Heat $149,500
2012 Sany SY215, EROPS, A/C, Aux Hyd. $122,500
2012 Sany SY135C, EROPS, A/C, Heat, 149 Hrs $89,500
2011 Kobelco SK295-9, EROPS, 32”pads, 658 Hrs $179,000
2011 Kobelco SK210, EROPS, A/C, 24”Bkt $144,500
2008 Case CX210B, EROPS, A/C, Heat, 151 Hrs $CALL
2008 Kobelco SK350HT, EROPS, A/C, 4321 Hrs $123,500
2008 Kobelco SK260, EROPS, A/C, Heat, 2392 Hrs $108,500
2008 Kobelco SK260LR, EROPS, LR unit, 2696 Hrs $119,000
2007 Kobelco SK350LC8, EROPS, A/C, 3656 Hrs $129,500
2007 Kobelco SK210LC-8, EROPS, 42”Bkt, 3207 Hrs $87,500
2007 Kobelco SK170LC-8, EROPS, Heat, 1655 Hrs $82,000
2007 Kobelco SK135SLRC, Aux Hyd, Heat, 2291 Hrs $63,500
2007 Kobelco SK135SR, EROPS, A/C, Plumbed $69,500
2007 Kobelco SK135SR, EROPS, A/C, Plumbed $69,500
2006 Kobelco SK330, EROPS, A/C, Heat $139,500
2006 Kobelco SK115SR, EROPS, Hyd Thumb $59,300
2006 Kobelco SK 160LC-6, EROPS, Aux Hyd. $73,000
2006 Komatsu PC200LC-7, EROPS, Thumb, 5482 Hrs $79,000
2006 Komatsu PC200LC-8, EROPS, A/C, Heat $96,500
2005 Kobelco SK330, EROPS, 2 units available $69,500
2005 Deere 200CLC, EROPS, Aux Hyd., 5124 Hrs $82,000
2003 Kobelco SK210LC-6, EROPS, A/C, 7033 Hrs $65,000
2007 Dynapac CA150PD, Single Drum, 129 Hrs $55,000
2006 Bomag BW177PDH, 66” Padfoot, 325 Hrs $44,000
2006 Bomag BW177PDH-3, 66” Padfoot, 100 Hrs $46,500
2005 Bomag BW177PSH-3, 66” Padfoot, 766 Hrs $39,000
2005 I-R SD100D-TF, OROPS, Single Drum, 659 Hrs $57,000
2005 Bomag BW177PDH-3, 66” Padfoot, 667 Hrs $41,000
2004 Cat CP-563E, 84” Padfoot, Blade, 2834 Hrs $62,000
2004 I-R SD70D, OROPS, Smooth Drum, 2093 Hrs $29,500
2004 I-R SD70D, OROPS, Smooth Drum, 44 Hrs $35,000
2004 Bomag C832C, OROPS, 68” Padfoot, 1207 Hrs $33,500
1989 Dynapac CA15PDB, OROPS, Blade, 4144 Hrs $18,500
2012 Kawasaki 95Z-7, EROPS, A/C,Ride Control $CALL
2012 Kawasaki 65ZV-2, EROPS, QC, Ride Control $155,500
2012 Kawasaki 45ZV-2, EROPS, A/C, QC, 4WD $71,500
2012 Kawasaki 70TMC-2, EROPS,A/C, Heat $162,500
2012 Kawasaki 90Z-7, EROPS, QC, A/C, Heat $295,000
2011 Deere 544K, EROPS, Ride Control, A/C, Heat $159,500
2010 Kawasaki 80ZV-2, Ride Control, 601 Hrs, A/C $155,000
2007 NH W190B, EROPS, Ride Control, 2667 Hrs $109,500
2006 Kawasaki 95ZV, EROPS, A/C, Heat, 5613 Hrs $169,500
2006 NH LW190B, EROPS, A/C, Heat, 3573 Hrs $69,500
2006 Cat 950H, EROPS, Heat, A/C, 5793 Hrs $135,000
2005 Komatsu WA200-5, EROPS, A/C, Heat $55,000
2003 Komatsu WA180-MC3, EROPS, A/C, Heat $58,500
1986 Cat IT18, EROPS, QC, A/C, Heat, 9322 Hrs $25,000
2012 Deere 700K LGP, EROPS, A/C, Heat, Topcon $CALL
2012 Cat D6N XL, EROPS, 6way, Accugrade ready $235,000
2011 Cat D6T XL, EROPS, SU Blade, 1180 Hrs $285,000
2011 Deere 650J XLT, OROPS, Sweeps, 6 way $75,000
2008 Cat D6T LGP, EROPS, A/C, Straight Blade $199,500
2008 Cat D6T XL, EROPS, A/C, SU Blade $210,000
2008 Cat D6T XL, EROPS, Sweeps, SU Blade $199,000
2008 Cat D6T XW, EROPS, A/C, Heat, SU Blade $242,500
2008 Cat D6N LGP, EROPS, A/C, 6way, 3620 Hrs $149,000
2008 Cat D6N LGP, EROPS, A/C, Heat, 3109 Hrs $149,000
2008 Cat D6T XL, EROPS, A/C, Heat, 4367 Hrs $210,000
2008 Deere 650J LGP, EROPS, PAT Blade, 1769 Hrs $75,900
2007 Cat D6T XW, EROPS, SU Blade, 3985 Hrs $199,000
2007 Cat D6T XL, EROPS, A/C, Heat, 4279 Hrs $189,000
2007 Cat D6K LGP, EROPS, Heat, A/C, Sweeps $124,500
2006 Cat D6R XL, EROPS, A/C, SU Blade $135,000
2006 Cat D6N LGP, EROPS, A/C, Heat, 3644 Hrs $112,000
2002 Cat D6R XL, EROPS, A/C, Heat, 5542 Hrs $115,000
1987 Cat D6H, OROPS, SU Blade, 24”Shoes $CALL
1974 Dresser TD15C, OROPS, SU Blade $CALL
2012 Kobelco 35SR-5, EROPS, Aux Hyd., Rubber $39,000
2012 Kobelco SK55SR, EROPS, 4 way blade, 2 units $64,000
2012 Kobelco SK55SRX C, EROPS, Rubber, 4 way $64,000
2012 Kobelco SK80CS, EROPS, A/C, 2 units $85,500
2012 Sany SY75, EROPS, Heat, A/C, 2 units $67,500
2009 Kobelco SK35SR-5, EROPS, QC, 2 units $29,000
2008 Kobelco SK17SR-3, OROPS, 355 Hrs $19,750
2006 Caterpillar 308CCR, EROPS, 24”Bkt, 1725 Hrs $55,000
2001 IHI 35NX, EROPS, 52” Stick, 3431 Hrs $17,000
2012 Deere 310SK, EROPS, A/C, 9 units available $CALL
2010 Cat 450E, EROPS, A/C, Heat, 164 Hrs $89,000
2008 JCB 3CX, EROPS, Aux Hyd., Heat, 354 Hrs $63,000
2008 JCB 4CX, EROPS, A/C, Ride Control, 974 Hrs $81,000
2008 Cat 420E, EROPS, A/C, Heat, 359 Hrs $62,000
2006 Cat 430E, EROPS, A/C, Extendahoe, 1731 Hrs $61,500
2005 Deere 310G, EROPS, Aux Hyd., 4x4, 3109 Hrs $36,000
1992 Ford 655C, EROPS, Heat, 5922 Hrs $15,000
1987 NH 555B, EROPS, 8028 Hrs $15,000
EXCAVATORS
MINI EXCAVATORS
LOADER / BACKHOES
COMPACTORS
WHEEL LOADERS CRAWLER TRACTORS
Page 24 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Rural Water Association Holds Operator Equipment Expo
Expo attendees take part in a pipe tapping con-test provided by Minnesota Pipe & Equipment,Farmington, Minn., and Mueller Company.
Gary Carlson Equipment provided a Takeuchi TB 180 back-hoe and skid loaders for the MRWA Expo rodeo event forattendees to try out a skills course.
Todd Sykora, manager, Infratech, provides a sewermainline demo at the expo event.
Ziegler CAT provided a 304E backhoe and skid loadersfor MRWA’s Expo Rodeo event. Attendees were able totry out the equipment “hands-on” in a skills course.
Operator Equipment Expo event attendees learn about line tracing equipment. Hydro Engineering demonstrates hydraulic pumps during MRWA’s expo event.
Minnesota Rural Water Association held its 4th AnnualOperator Equipment Expo on Sept. 13, 2012 in Waconia,Minn., at the Carver County Fairgrounds. The changeup
from a two-day event held in August to a one-day event held inSeptember was a success, being the largest to date with more than250 attendees.The expo was a unique training opportunity in that attendees
experienced live, hands-on demonstrations and equipment opera-tion. From the backhoe and skid loader rodeos, provided by ZieglerCAT and Gary Carlson Equipment, to the multiple water andwastewater opportunities, there was something for everyone to see.All day events included line tracing, sanitary sewer nozzles, pipe
tapping contest, test-driving equipment, skid loader rodeo andbackhoe skills contests. Many vendors also provided hands-ondemonstrations at their booth locations with valves, pumps, metertesting, leak detection, aerators and more.Attendees received a commemorative T-shirt and a picnic lunch
was provided, as well as, door prizes donated by vendors and a flatscreen TV donated by MRWA were given away.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 25
WWW.RUDDEQUIPMENT.COM CALL: 1-877-DIG-RUDD
If there’s one thing more hardworking and reliable than Rudd’s equipment, it’s Rudd’s service and maintenance. Rudd’s freight system and 13 service branches across nine states, together with our award-winning master technicians, mean we can deliver replacement parts, equipment and service to your site by the next morning. It’s that kind of 24/7 service that proves how committed Rudd is to going the distance for you.
Loads. Sorts. Carries. Always clocks in on time.
Indianapolis, IN 317-247-9125Fort Wayne, IN 260-482-3681Evansville, IN 812-867-6661Pittsburgh, PA 412-741-1731
Clearfield, PA 814-765-8500Louisville, KY 502-456-4050Corbin, KY 606-528-9440
Prestonsburg, KY 606-874-2104St. Louis, MO 314-487-8925Charleston, WV 304-755-7788
Cleveland, OH 614-438-4192Columbus, OH 614-438-4192Cincinnati, OH 513-321-7833
Page 26 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
90
29
80
NORTH DAKOTAMINNESOTA
SOUTH DAKOTA
NEBRASKA
IOWADavenport
Clear Lake
Des Moines
Sioux City
Sioux Falls
Twin Cities
Aberdeen (HC Clark Imp)
94
94
WISCONSIN
LaCrosse
Shakopee Rosemount
Duluth
Grand Island
KearneyLexington
Tri-StateEquipment
North Platte
CenterPoint
Rogers
39
39
Grand ForksCrookston
Omaha
Lincoln
Rapid City
FargoFargo Tractor
Marshall
BismarckDickinson
MinotWilliston
Albert Lea
15
90
80
25
WYOMING
MONTANA
Missoula
Great Falls
Titan Rentals Billings
Titan Rentals Helena
Billings
Gillette
Casper
Cheyenne
Bozeman
Big Sky
Mandan (Twin City Imp)
Aberdeen
76
70
COLORADOFort Collins
Denver
Colorado SpringsCASE CE NEW HOLLAND CE
BETTER RENTBETTER RENTFrom the Region’
MallsGrea
MONTMO
issoula
MM
MM
15 MONTANAGre
M
Great F
AL SOLBETTER RENTs Largest Cons n’
TAT
illistonWMM
TH TATAOR TATAN NOR NOR ORT ORT OOOKOKODinoti
DAD
WWiMMMANANAANNANAANAN
AL SOL struction Equipment Dealer Network.
nMINN
nTATATATT
CrookstoCrookstoo
D l th
NENNESONEnCrookstoC ooC ooksto
ssrkkkFoGrand
UTIONS.AL SOL ent Dealer Network.
UTIONS.s Largest Construction Equipment Dealer Network.
e
issoulaMM
itan Ren s Helena e
s
entals He en s He
BBB
enta Re e itan Rentals Billings Re enta enta yg S
enta enta Big Big
MI GGGWWW OMW OMOMMINGMI G
90
WYYY
M
Billi gBillingTB gssBBillinggg
T
g SBig Sk
Bozeman
kkinsonDickc
Mand ndan
HC Clark Imp)Aberdeen (HC Clark Imp) Clark Imp) Clark Imp) (HC (H C Clark Imp) C Clark Imp) Clark Imp)
yapid City y
KS S UTH UTH TAKKDADA
E AENEEEBRASK
KODASOUTH OUTH OUTH
R
k kBismarckk
d win City Imp)d
gs
M M
l llings i gs l ls Billings l Billings lings llings
e
Casper
ennen80
25
Gillett
Cheyenne
(TTwin City Imp)dan
tounun
r uth
s
urr orr Duluth
t t e t
p) p) p) AberdeenA deed eeeeRR
A enA e
in n
p) p)
ss C CT sn n
emoumouseeRosemounR semoun
MMa
RRShakopep
allsSio allsallsSio Sio
rshallrsh lMaMa
Albee at t erer
Equipmen
aalalllslls
City
Clear L Lake L ake aEquipmenEquipmen
t t
PP
Sioux CitySioux City ty ty
to
y y
OmaO aD Des Moineses Moinese
OOOO hhaaahaaha
90
29
80
o
n Citie e eTwTwTw
R
RoRogersRo
Sioux Fux Fux FSioux FSioux F
mm tm
A
EquipmenEquipmen
e hahaaa
94
u
oinPPPnntntentntCee
O aha
mentatei-StateTr
pe un
WISC
peepe
er
hr hMarsh
FFtoacTrrgo Fa rgFa
Let r
n
LaCrosse
t
rosse
CC
94
er
ONSINSC
39
39
RADOLLOCOO
y
th Platte
Kearneyyxington
KeKegggtog onox
Nor
LeLeLe
Cheyenneenennen
RADO
olorado Springso
RADOOO 76
70
o Springs ringsC
verD nvDeDe
ollins CrtFo
venvenD vv
G G
maO aOO
Island
DavenporD venporDD
WWA
hhaa
d d Grand G d olLincoo IOIOWAWAoondI l nddd WAIOIOIOOOI l d lnl
G d
O ahattnpornpor
Visit www.sealsaver.com for more information or contact us at 1-800-683-5189
Exclusively manufactured by:
Fluid ControlServices, Inc.1155 Allgood Road • Suite 15
Marietta, GA 30062
1-800-683-5189Fax: 770-509-5832
The SEAL SAVER*WILL:
• Eliminate rod scoring
• Extend the life of cylinder seals
• Protect cylinders from the elements
• Prevent pitting due tochemical washes
• Reduce particle contamination of hydraulic systems
• Minimize dings and dents associated with
falling debris*Patented
Made inthe USA
SEAL SAVERhas proven effective in
Recycling, Construction,Mining, Rock Quarries, Waste
Management, Refineries, WoodProducts Processing, Steel
Mills and Hot Slag Industries.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 27
Page 28 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Break Out the Bubbly...
Ribbon Cutting Event Kicks Off Nortrax Grand Opening
Volvo Rents Buys FRED RentsStores in Madison, Neenah
Volvo Rents, a worldwide provider ofsmall- to medium-sized construction equip-ment, announced the acquisition of FREDRents, a two-location construction equip-ment rental company with stores in Madisonand Neenah, Wis.
The move comes as many equipmentrental companies such as Volvo Rents con-tinue to see a “secular shift” in NorthAmerica as customers — including contrac-tors, construction businesses and homeown-ers — recognize the advantages of the fixedcost of renting, which also covers mainte-nance, storage, delivery and more.
The continued annual growth in rentalrevenue is forecasted to reach a total of $53.1billion by 2016, according to the AmericanRental Association
“There is a real opportunity for us to gainfurther market penetration by aggressivelyselling the value of equipment rental at thispoint in the economic recovery," said MikeCrouch, vice president of business develop-ment of Volvo Rents.
“It is our time to help our customer basesucceed in their businesses. We are the cata-lyst that enables economic growth and
allows businesses to recover, employ peopleand strengthen the economy, whether it is inWisconsin, the United States or globally,”said Crouch.
In addition to Volvo Rents’ expanding lineof Volvo compact equipment — such asbackhoe and skid steer loaders, compactwheel loaders, compact excavators and com-paction equipment — the rental center car-ries a comprehensive line of essential equip-ment and tools for the construction, com-mercial, industrial and homeowner markets.The focus is on daily, weekly and monthlyrentals.
“Volvo Rents is a solutions-based compa-ny that provides services that solve immedi-ate issues when people are dealing with cap-ital availability and downsizing of ownedfleet due to economic reasons,” said JeffreyCorcoran, co-founder of FRED Rents in2002. “I am confident that our customers arein great hands.”
While store hours will remain Monday toFriday, 7 a.m. to 5 p.m., the company offers24-hour service, every day of the week.
For more information, visitwww.volvorents.com.
Nortrax recently celebrated the grand opening of its newest full service John Deereconstruction and forestry dealership in Mosinee, Wis. Approximately 150 guestsattended the event, which started off with a special ribbon cutting ceremony. TimMurphy cuts the ribbon during the start of the grand opening.
Three Days Here and You're Good for the Year
CONDEX Trade Show
Private Meetingsin Suites
Industry-Speci�c Education
www.aedsummit.comRegister
Now iR
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 29
HULL’S IMPLEMENThulls151.com 920-324-5341
Jct. Hwy 151 & 26 N, 2 Miles N.E. of Waupun, WI On North Frontage Rd.50 Years of Dealing Only in “Quality Used” • Call If Looking To Buy Or Sell!
Super Nice Wheel Loaders!! See Complete Inventory at www.hulls151.com
2002 Case 821C, C/A, Only 4,134 Hrs., 4Yd. Bkt., Ride Control, Nice! ........$84,950
2002 Volvo L120E, C/A, 10,403 Hrs., Hyd.Quick Coupler, w/4.3 Yd. Bkt ........$92,500
2003 Case 821C, AC, 6860 Hrs, 4 Yd,23.5x25, New Paint, Nice! ............$73,950
2005 Case 621D, C/A, 4,608 Hrs., RideControl, 2.75 Yd. Bkt., Sharp! ......$74,950
1998 JD 644H, C/A, 9,191 Hrs., 4.75 Yd.,23.5x25L3 Tires @ 75% ..................$71,900
2005 Volvo L60E, C/A, Volvo Q.C., w/2.3Yd. Bkt., 6,965 Hrs., Nice! ............$79,950
2000 JD TC54H, C/A, 8,575 Hrs., 3rdValve, Ride Control, JRB Q.C. ......$67,950
1997 Cat 938F, C/H, 9,765 Hrs., 20.5x25L2Tires @ 80%, Sharp! ......................$53,900
2003 JCB 426HT, C/A, Only 3,340 Hrs.,Q.C., w/2.4 Yd., 3rd Valve, Nice!, Hyd.Q.C. 4 Yd Bucket Available ..........$65,950
2006 Case 721D, A/C, 6820 Hrs., JRB Q.C.w/ 3.5 Yd., Aux. Hyd., New Tires VerySharp -Original-..............................$89,500
2006 Cat D5NXL, Cab, A/C, Only 2,452Hrs., 6 Way Blade, Like New!......$85,950
2005 Volvo L50E, C/A, 11,141 Hrs., VolvoQ.C. w/2 Yd. Bkt., Extra Nice........$55,950
2002 JD 230C LC, 8,500 Hrs., New UC,A/C, Hyd, Q/C, w/ 52” Bkt, Super Nice ..............................................................$68,9002005 JD 200 CLC, 4,826 Hrs., Very Nice,Tight & Original, 48” Bkt ..............$76,900
2007 Case CX135SR, 2,530 Hrs., A/C,"0-Turn", Like New..........................$66,900Also: 1997 JD 490E, 8,788 Hrs., 9'10"Stick, 42" Bkt, Excellent ................$28,900
1997 Cat 315L, 9,200 Hrs., Hyd. Q.C., Hyd.Thumb, Aux. Hyds., 48" Bkt ..........$44,950Also: 2006 JD 27C ZTS Mini Exc., 2,638Hrs., Aux. Hyd, Clean & Tight ......$17,950
2006 JD 650J LGP, A/C, 5262 Hrs., NewU/C, 6-Way, Very Nice! ................$64,900Also: 2006 JCB 3CX, Backhoe, C/H, 4x4,Extend-A-Hoe, 1,904 Hrs ..............$34,500
2008 JD 310SJ, C/H, 4x4, Extend-A-Hoe,3,945 Hrs., Pilot Controls ..............$51,900Also: 2004 JD 310G, C/H, 4x4, Ext. Hoe,3,020 Hrs., Plumbed ......................$37,900
2005 Case 590SM II, C/H, 4x4, Std. Hoe,21Lx24s @ 90%, 4,906 Hrs ............$38,950Also: 2004 NH LB75B, A/C, 4x4, Ext. Hoe,3,606 Hrs., Pilot Controls ..............$34,900
2003 Case 590SM, C/A, 4x4, Extend-A-Hoe, 3,375 Hrs., P. SH, R/C, 4-in-1$44,950Also: 1999 NH 575E, 4x4, Ext. Hoe, Cab,3,921 Hrs., Like New Tires ............$27,900
2000 Cat D6MXL, Cab, A/C, 10’7” WayBlade, 80% U/C, Very Nice, Tight Unit ..............................................................$67,500
1997 JD 770CH Motor Grader, A/C, 5,914Hrs, 14’ MB, Laser Grading System,Super Nice!......................................$74,9501999 Case 570XLT Skip Loader, Cab,A/C, Heat, 3pt, 5 Valve Remote - 7’BoxScrapper, X-Nice! ..........................$25,900
2006 Cat D4G LGP, 2,286 Hrs., C/H/A,70% U/C, Very Nice! ......................$57,9502000 JCB 520 Tel. Forklift, A/C, 17’ Lift,4,400 Lb. Capacity, Very Nice2005 Cat 420D Backhoe, OROPS, 4x4,Std Hoe, 5,120 Hrs, Very Clean Original ............................................................$32,950
2009 JCB 1110 Skid Steer, Only 258 Hrs.,Cab, Side Door, 2 Spd....................$29,950Also: 2009 Case 410, 371 Hrs ......$18,4992006 Bobcat T250, 2,100 Hrs ........$19,950(3) JCB506C Tel. Forklift, 6,000 Lb, 36-42’Lift ........................................................CALL
2008 Cat 256C Skid Steer, C/A, 2 Spd.,Aux. Hyds., New Tires, 401 Hrs ..$29,950Also: 2006 Cat 257B, 2,089 Hrs.....$21,9002010 Cat 226B3, OROPS, 561 Hrs., LikeNew2009 Cat 226B2, OROPS, 1305 Hrs.$19,950
New TiresNew Tires
LIKENEW!LIKENEW!
LIKENEW!LIKENEW!
Doosan Portable Power has named Roland MachineryCompany, headquartered in Springfield, Ill., an authorizeddealer of portable and utility mount air compressors, gener-ators, lighting systems and light compaction equipment. Inaddition to their corporate office, Roland Machinery also has14 additional full service facilities located in fiveMidwestern states.Roland Machinery Company was founded by E. Earl
Roland in 1958 as a construction equipment dealer servingCentral Illinois. During the next quarter century, the compa-ny added several manufacturers to extend their equipmentline offerings to an expanding customer base. Today, RolandMachinery serves many related industries including earthmoving, sewer, highwayconstruction and demoli-tion, quarry, mining scrapmetal and steel, forestry,pipeline, industrial andagricultural markets.“The Doosan product
line fits nicely within themany market segmentswe serve,” said MattRoland, president. “Thepartnership with DoosanPortable Power comple-ments our already premierline of equipment offer-ings, while filling animportant niche thatallows us to better serveour loyal customer base.”Roland Machinery will
distribute Doosanportable and utility mountair compressors, genera-tors, lighting systems andlight compaction equip-ment across a territorythat includes 58 counties in Central and Eastern Missouriand 24 Southern Illinois counties. The company is alsoauthorized to distribute Doosan portable air compressors,lighting systems, utility mount air compressors and lightcompaction equipment throughout the entire state ofWisconsin and 15 counties within the Upper Peninsularegion of Michigan.“Our new dealer relationship with Roland Machinery
greatly enhances the synergy of Doosan equipment offeringsthroughout the core regions of the Upper and CentralMidwest,” said Rita Moore, director of sales, NorthAmerica, Doosan Portable Power. “Roland Machinery is acustomer-focused company that has been in business formore than a half century, and understands the needs of con-tractors involved in many different markets. We look for-ward to a long and collaborative partnership with them andthe opportunity to expand access to Doosan compressors andlighting systems throughout this region of the country.”For more information, visit doosanportablepower.com.
Roland MachineryTakes on DoosanPortable Power Line
“The Doosanproduct linefits nicely within manymarkets weserve”…
Matt RolandRoland Machinery
Page 30 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Travis Clinesmith has joined Murphy Tractor &Equipment Co. Inc., as a territory sales manager, in ParkCity, Kan. He will be responsible for new and used heavyequipment, attachments and trailer sales in southeast Kansas.“I was attracted to Murphy Tractor because the positive
environment,” said Clinesmith. “The best advice I everreceived was to treat others the way I would want to be treat-ed. I look forward to incorporating that advice into my newposition. I am eager to meet new people and provide the bestpossible service to my customers,” he added. Murphy Tractor and Equipment Co. Inc., one of John
Deere’s largest North American construction equipmentdealer organizations, is headquartered in Park City, Kan.The organization has 28 locations throughout the states ofIowa, Kansas, Missouri, Ohio, Pennsylvania and Nebraska.For more information, visit www.murphytractor.com.
Welcome Aboard...
Murphy Tractor &Equipment NamesTerritory Sales Mgr.
Travis Clinesmith will be responsible for new and usedheavy equipment, attachments and trailer sales insoutheast Kansas.
Ziegler CAT Announces Promotions,Transfers, Organizational Changes Ziegler CAT has recently announced the transfer of Dave
Johnson to the position of vice president Ziegler AgEquipment. In addition to his new responsibilities, Johnsonwill retain his sales leadership role in Ziegler’s mining busi-ness. Johnson joined Ziegler in 1986 as a construction sales-person and continued his career in the sales department invarious positions, most recently as vice president construc-tion and mining sales. Andreas Hoeft will move from vice president Ziegler Ag
Equipment to vice president construction sales. Hoeft beganfull-time employment at Ziegler in 2006, and has worked asa six sigma black belt, a customer service representative(CSR), a sales territory manager, and industrial CSR salesmanager before taking responsibility for the introduction ofthe new Cat vocational truck as business-development man-ager. William M. Hoeft has been promoted to vice president
product-support sales and marketing. Hoeft began full-timeemployment at Ziegler in 2009 as a product-support special-ist. A year later, he became a six sigma black belt, followedby positions as marketing coordinator, mining business spe-cialist, CSR, and most recently, product-support productmanager. With the retirement of Ziegler’s president, Stan Erickson,
this November, William L. Hoeft, CEO and chairman of theboard, will resume the position of president of Ziegler CAT.Founded in 1914, Ziegler is a family-owned company
employing more than 1,400 people in 19 communities inMinnesota and Iowa.For more information, visit http://www.zieglercat.com/. (This story also can be found on Construction
Equipment Guide’s Web site at www.constructionequip-mentguide.com.)
CEG
Ziegler CAT has recently announced the transfer ofDave Johnson to the position of vice president ZieglerAg Equipment.
William M. Hoeft has been promoted to vice presidentproduct-support sales and marketing.
Andreas Hoeft will move from vice president ZieglerAg Equipment to vice president construction sales.
With the retirement of Ziegler’s president, StanErickson, this November, William L. Hoeft, CEO andchairman of the board, will resume the position ofpresident of Ziegler CAT.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 31
CUSTOM REBUILD DIVISIONCUSTOM REBUILD DIVISIONTOP QUALITY, non-union, independent EMPLOYEES that care deeply for our customers, working in a TOP QUALITY FACILITY in Iowa, equals TOP QUALITY EFFICIENCY!
Custom Rebuilds, Remans & Repowers Rebuilds & Repairs
Contract Remanufacturing, Rebuilding & Mechanical ServicePlease contact Josh Scheckel for any of your service requirements, call 563-872-4112, or email [email protected]
Transport and Financing available. Detailed pictures/descriptions at
For equipment rental and sales call 563-872-4112, or email [email protected]
563-872-4112
97/2012 CAT D11R, D10R, D9R Remans........2006 CAT D9T Full Specs, New UC..............2002 CAT D9R Full Specs, New UC..............1996 CAT D9R Erops, 18,000 hrs, Nice!.......1995 CAT D9R Erops, Ripper, U Blade..........1968 CAT D7E Orops, Good Undercarriage....1997 CAT D6R XL Orops, 12,000 hours......1996 CAT D6R XL Orops, 4,355 hours...........1993 CAT D6H LGP II Orops, Nice!................1991 CAT D6H XL Orops, Good U/C...............(2) 2005 CAT D6N LGP’S Erops, 7k hrs..(2) 2005 CAT D6N XL’S Erops, 7k hrs.....(2) 1997/98 CAT D6M LGP’S Orops........1987 CAT D5H Orops, 6-way PAT blade........2005 CAT D5N LGP Orops, 7,000 hours........
CALL!!$380,000$255,000$205,000$260,000
$25,000$120,000
$92,500$69,000$69,000
$135,000 EA$130,000 EA $65-69,000
$29,000$68,000
$64,000$37,000$78,000$58,000
$4,500-$21,500$19,000 EA
$19,000
$95,000$45,000$56,000
$37,000 EA$75,000 EA
CALL!!
1999 CAT D5M LGP Orops, 6,300 hours........ 1988 CAT D4H LGP Orops, Just in!................2005 DEERE 700J LGP Orops, 2,400 hours...1997 KOMATSU D65EX12 Orops, 8,088 hrs
(10) 48” & 60” SHEEPSFOOT..........(2) 2009 HOLMES ROLLERBLADES........ 2005 ROME TACW-12 OFFSET DISK............
2005 CAT 988F Well maintained, Records.... 2006 CAT TH460B TELEHANDLER..............2006 CAT TH580B TELEHANDLER..............(6) 2002 NOBLE 417B PULL SCRAPERS..(2) 2007 MISKIN DW25’S......................ATTACHMENTS, RIPPERS, BLADES................
$78,000$58,000
$4,500-$21,500$19,000 EA
$19,000
$95,000$45,000$56,000
$37,000 EA$75,000 EA
CALL!! 2006 CAT D9T $380,000FULL SPECS, NEW U/C
that care deeply for our customers,
Contract Remanufacturing, Rebuilding & Mechanical Service
(2) CAT D9R REMANS CAT D11R REMANCAT D10R REMAN CAT D10R REMAN
ALLU Group, Inc. | Info Call: 1-800-939-2558 | Email: [email protected]
ALLU D-SERIESScreener Crushers & Fine Screeners
scan for video
ALLU provides portable screening and crushing attachments that will crush, mix, stabilize, aerate and screen for pipelines, topsoil, compost, construction debris, contaminated soils, asphalt, mulch, salt, coal, sand, gravel, sludge, garbage, bio-waste, food waste, leaf mulch, glass, gypsum, pallets, lime & much more!
www.allu.net
• Available to fi t • High production even with wet muddy materialsmaterials• 5/8” & 1” Fine screening size• 5/8” & 1” Fine screening size • 1-1/4” and up sizes with replaceable• 1-1/4” and up sizes with replaceable hammershammers
• Available to fi t • Available to fi t
Page 32 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $75
Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50
Scale ....................................................................................$75
Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale..$75
Allis-Chalmers HD-41 Dozer, 1:25 Scale ....................$200
Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$60
Bantam C-35 Crawler Shovel, 1:50 Scale ....................$70
Bantam Shovel Mounted on a White Truck, 1:50 Scale $75
Bobcat E35 Compact Excavator, 1:25 Scale ................$50
Bobcat M400 Gold 50th Anniversary Skid Steer Loader,
1:25 Scale ........................................................................$35
Bobcat M610 Golden 50th Anniversary Skid Steer
Loader..............................................................................$25
Bobcat S175 Skid Steer Loader, 1:25 Scale ................$40
Bobcat S185 Skid Steer Loader, 1:25 Scale ................$45
Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer
Set, 1:50 Scale ................................................................$60
Bobcat 743 Skid Steer Loader, 1:25 Scale....................$35
Bobcat 773 50th Anniversary Skid Steer Loader, 1:25
Scale ................................................................................$25
Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ......$25
Bobcat A300 Skid Steer Loader, 1:25 Scale ................$35
Bobcat A770 Skid Steer Loader, 1:25 Scale ................$40
Bobcat 2008 Road Tour Semi Tractor/Trailer, 1:64 Scale ..
..........................................................................................$25
Caterpillar D4E Track Type Tractor, NZG, 1:50 Scale ..$80
Caterpillar 365C Front Shovel, 1:50 Scale ..................$110
Caterpillar 906H Compact Loader, 1:50 Scale..............$40
Caterpillar Military 924H Versalink Loader in Desert
Camouflage, 1:50 Scale ..................................................$45
Doosan Moxy MT31 Articulated Truck........................$115
Euclid R32 Off-Highway Truck, 1:50 Scale ..................$35
Hamm GRW280 Compactor w/Cabin ............................$75
Hamm 3307 Compact Roller, 1:34 Scale ......................$45
Hitachi EH700 Off-Highway Truck, 1:50 Scale..............$35
International "S" Series Dump Truck,1:25 Scale ......$125
International TD-15 Dozer, 1:50 Scale ..........................$60
International TD-20E Dozer, 1:64 Scale ........................$24
International TD-24 Military Dozer, 1:50 Scale ............$45
John Deere 624K Wheel Loader, 1:50 Scale ................$35
Komatsu D375 Dozer, 1:50 Scale ..................................$90
Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80
Komatsu HM250 Articulated Truck, 1:50 Scale ............$70
Komatsu PC14R Mini-Excavator, 1:32 Scale ................$40
Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$200
Komatsu SK1020 Skid Steer Loader, 1:25 Scale ........$35
Komatsu SK1026 Skid Steer Loader, 1:25 Scale ........$35
Komatsu WA500 Wheel Loader, 1:50 Scale..................$90
Komatsu 475A-5EO Dozer, 1:50 Scale ........................$125
Kubota KX121-3 Compact Excavator, 1:24 Scale ........$50
Link-Belt 800 X2 Excavator,1:50 Scale........................$240
Link-Belt 80100 Rough Terrain Crane ........................$190
Mack Granite MP Dump Truck w/ Beavertail Trailer, 1:50
scale................................................................................$110
Mack Granite MP w/ Bottom Dump Trailer ..................$85
Mack R Model Mixer Truck, Patriotic Detailing, 1:34 Scale ..
..........................................................................................$70
New Holland 555 Skid Steer Loader, 1:25 Scale ..........$30
Northwest 25-D Shovel, 1:50 Scale ..............................$85
Peterbilt 367 Dump Truck w/ Beavertail Trailer, 1:50 Scale
........................................................................................$120
Terex RC45 Rough Terrain Crane, 1:50 Scale ............$180
Terex RT130 Rough Terrain Crane, 1:50 Scale ..........$145
Vogele Vision 5200-2 Paver, 1:50 Scale ......................$140
Volvo SD-122 Soil Compactor, 1:72 Scale ....................$25
All New in Box
CALL Toll Free
800-523-2200Ext. 197
Collections Wanted, I Buy Collections Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Bantam C-35 Backhoe, 1:50 Scale $60 Bantam C-35 Shovel, 1:50 Scale $60Bantam Truck Mounted Shovel,
1:50 Scale $60
Bantam Truck Mounted Backhoe,
1:50 Scale $60
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 33
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
2003 Cat D8R II, S/N 06YZ01126, 8130 hrs,e/rops, a/c, heat, w/ multi-shank ripper, 8sublade, reman trans in 2011................$262,000
2005 Komatsu PC400 LC7, S/N 0A86676,6601 hrs, a/c, heat, u/c 65%, 2 available ..............................................................$159,000 EA.
2006 Cat 330DL, S/N PMWP00369, 5240 hrs,a/c, heat, pattern changer ..................$139,000
2006 Case CX240, S/N 46509315, 5083 hrs,a/c, heat, GPS machine, control ready ..........................................................................$89,000
FALL EQUIPMENT SALE2003 Cat 420D IT, 5082 hrs, 4WD, a/c, heat, extendahoe, Stk #465 ......................................................................$39,0002005 Cat D8T, 8115 hrs, e/rops, a/c, u/c 60%, 3rd valve, Stk #541 ....................................................................$289,0002005 Cat 320C LU, 3882 hrs, heat, a/c, u/c 65%, zero tail swing, Stk #437 ............................................................$90,0002005 Cat D6NXL, 6448 hrs, e/rops, new u/c, a/c, heat, GPS, Stk #399 ....................................................................$125,0001998 Cat 613C II, 11 yd scraper, 2706 hrs, heat, a/c, e/rops, 70% rubber ..................................................................$59,0002004 Cat 325CL, 4700 hrs, u/c 60%, a/c, heat, aux hydraulics,Stk #369 ....................................................................$107,0002004 Deere 450CLC, 6156 hrs, a/c, heat, thumb, u/c 85%, Stk #497 ....................................................................$127,0002005 Terex TA27-G7, 4769 hrs, rubber 50%, heat, a/c, 2 Available ..............................................................$99,000 EA.1986 Cat 613, Water wagon, 1945 hrs, cab, air operated watercannon, Stk #548..........................................................$29,0002010 LaBounty 200r, 500 hrs, 3rd member hydraulic process-ing shear ......................................................................$99,000
PHONE
(812) 282-2800 KENNY ACTON
(502) 639-4168
Ask about our GPS Machine Control Equipped Dozers,Graders & Excavators www.JobRentals.com
(812) 282-2882 FAX
6104 Sable Mill Court, Jeffersonville, IN 47130
Page 34 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Belle Isle Takes ‘Race-Track Approach’ to Paving Roadbeen used, so when water got in the jointsand went through Michigan’s freeze-thawcycles, the concrete cracked at different ele-vations. Because the cracks were longitudi-nal, cars were racing on them for extendedperiods, heating up the sealer and making itpliable. When the sealer became flexible, itpulled on the concrete, tearing it out all theway down to the next layer where it wascracked.
Repairing Racing DamageRepaving the roadways on Belle Isle was
not on the city’s agenda, but repairs werenecessitated because of the damage done bythe race cars. Belle Isle is a 982-acre islandpark in the Detroit River between the UnitedStates mainland and Canada, connected tothe rest of Detroit by the MacArthur Bridge.Although the island generates a lot of traf-
fic during the summer – as many as 6 millionvehicles – a city park was not a priority foran economically troubled city. But becauselegendary team owner Roger Penske wasresponsible for bringing the series back tothe Motor City, repairs were going to bedone right. The $1.2-1.3 million budget evenincludes contingency money. “We had a base number going in, but we
expected surprises so we had ‘surprisemoney’ built in,” Baise said. “Roger wantedit to look good, so we extended the concretein some areas just for aesthetics.”They took a “race track approach” to
paving, Baise said. “We have to. The specsare higher, more refined, and the tolerancesare closer.” To achieve the desired toler-ances, they brought in Wolverine Engineersand Surveyors, out of Mason, OH. It mayseem like a long way to go for an engineer,said Baise, but having used them atMichigan International Speedway in the1980s through the 1990s, he knew they hadexpertise with race tracks.Their input may be even more critical
because, in addition to paving work, the cir-cuit for the 2013 Chevrolet Detroit Belle IsleGrand Prix is being modified to enhancecompetition. The course will be extendedone-quarter mi. to 2.346 mi., the track lengthutilized from 1997-2001, by adding a half-mile straightaway through the tree-lined cen-ter of the island. “We’re taking one turn out and making a
longer straight for more passing opportuni-ties, due to complaints about the lack ofpassing,” Baise said.Drivers on hand for a press conference
during construction were pleased with thechanges. “It will be a more suitable racetrackfor us, with more passing opportunities,”said Sebastien Bourdais, an IndyCar regular. “It’s going to be a lot faster and a lot
smoother,” said Oriol Servia, another
IndyCar veteran. “The Chevrolet Detroit Belle Isle Grand
Prix team is enhancing Belle Isle to make ita more challenging, world-class road coursefor all the great series competing on theisland,” said General Motors North AmericaPresident Mark Reuss.“It will definitely give us another place to
pass,” said series veteran Tony Kanaan.“That’s a good thing on this track, and itshould make things more exciting for thefans.”Despite the emphasis on preparing the
surface for racing, this roadway serves thepublic 51 weeks a year. “We always have to
remember that we aren’t only building a rac-ing surface; we’re building something thathas to survive as a public road during aMichigan winter,” Baise said.“That’s the reason this was such an expen-
sive project,” said Bud Denker, chairman ofthe Board of Detroit Belle Isle. “We’ve doneengineering studies far beyond anything thathas been done for this track or this islandbefore.”
Under the SurfaceLocal contractors M&B Contracting,
from Metamora, Ill., and Pollard ConcreteServices, both of whom have done work on
the island before, partnered on this project.The first step was to have a small demoli-
tion crew of three operators and 3-4 trucksremove deteriorated concrete areas of theracing surface. Broken concrete was chippedout in preparation for hot rubber sealer to fillthe void.The core samples tell them if the cracks
are isolated or deep. Where there’s only asuperficial top layer problem, crews “bustout” the damaged sections and apply a skimcoat. If they’re deep, they then have todecide how to patch: remove large blocks ofconcrete or apply crack sealer. “We’re doing
The project was complicated in some areas because crews had to warp the road pitch at the crown to meet the turns, but stillensure that drainage goes to the catch basins, not into an off-camber collection area.
see INDYCAR page 74
Repaving the roadways on Belle Isle was not on the city’s agenda, butrepairs were necessitated because of the damage done by the racecars.
The first step was to have a small demolition crew ofthree operators and three to four trucks remove dete-riorated concrete areas of the racing surface.
INDYCAR from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 35
Crawler and Rough Terrain Cranes
Crawler Cranes Rough Terrain Cranes
Uplifting
America FSANY Crawler and Rough
eatures Full Lines ofAmerica Fer TTerrain CranesCrawler and Rough
eatures Full Lines oferrain Cranes
Uplifting
Uplifting
Crawler CranesSCC8100SCC8150SCC8200
Crawler and Rough
Crawler Cranes Rough TRough Terrain SRC840SRC865SRC865XL
Craneserrain e
SRC865XL
UpliftingerformanceP
Upliftingerformance
erformance
SCC8300SCC8500
318 Cooper Circ 770-631-7731 | Email:ax: 678-251-2869 | Fel:TTel:
SRC885
GA 30269, eachtree City Ple,318 Cooper Circamerica.com | wwwy sales@san 770-631-7731 | Email:
GA 30269america.comy.sanamerica.com | www
Page 36 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
West SideTractor, Twin City CollisionRepair Hold Pink Gator FundraiserWest Side Tractor Sales Co. and Twin City Collision
Repair announced the winner of the Pink Gator FundraiserOct. 30 at an event in Lafayette, Ind. In May, West Side andTwin City kicked off the Pink Gator Fundraiser to supportthe YWCA Greater Lafayette Women’s Cancer Program. Hundreds of participants purchased raffle tickets for a
chance to win a pink, custom designed John Deere Gator.The winner was a woman from the Lafayette community.The Pink Gator raised more than $9,500 for the Women’sCancer Program.“When the opportunity came up for West Side to partner
with Twin City Collision, we were excited to support such anexcellent cause,” said Bill Price, the West Side Lafayettestore manager. “Day in, day out, the YWCA Women’sCancer Program makes a difference in women’s livesthroughout our community. This is our way of saying thankyou and ensures that women in our community continue toreceive the healthcare and support they need.”The YWCA Women’s Cancer Program provides commu-
nity-based outreach, support groups, education and access toclinical breast exams, mammograms, and other medicalservices, as well as translation and transportation, to under-served women in Tippecanoe County and 22 other Indianacounties.“When West Side expanded into Indiana two years ago,
we brought the same core values that have allowed for oursuccess in Illinois for 50 years. As an organization, our goalis to not only be a business partner, but also a communitypartner,” said Lauren Coffaro, West Side marketing manag-er.For more information, visit
www.westsidetractorsales.com
Diane Jone, of West Pont, Ind., the winner of the Pink Gator Fundraiser, takes her prize for a ride.
West Side Tractor Sales Co. and Twin City CollisionRepair announced the winner of the Pink GatorFundraiser Oct. 30 at an event in Lafayette, Ind.
(L-R): Bob Wright, Brian Benck, Lauren Coffaro, andBill Price of the West Side Tractor sales team take alook at the Lafayette Gator.
MacAllister Machinery Company Inc., a distributor ofnew and used Caterpillar equipment, recently announcedplans to expand its operations in Washington, Ind., creatingup to 61 new jobs by 2016.The home-grown Hoosier company will invest $8.9 mil-
lion to equip and expand its existing 38,740 sq. ft.Washington facility by more than 50,000 additional sq. ft.The expansion, which is expected to be completed in fall of2013, will house sales, parts and services for MacAllister’sinventory of Caterpillar heavy and compact equipment aswell as MacAllister Power Systems including Caterpillargenerators.“It always gives me great pleasure to see a homegrown
company like MacAllister succeed in Indiana,” said Gov.Mitch Daniels. “MacAllister’s continued investment inIndiana will lead to more jobs for hardworking Hoosiers andshows why our business climate is the best in the Midwest.”Established 67 years ago and solely owned by the
MacAllister family, the company employs more than 750associates at its 20 locations throughout Indiana.MacAllister, which is headquartered in Indianapolis, is oneof the few distributors of Caterpillar parts and machinery inIndiana and serves customers in the heavy construction, coal,commercial and residential, government, construction, agri-culture and power systems industries.“MacAllister was founded in 1945 in Indiana and has
deep roots in the Hoosier state, with 20 locations,” said ChrisMacAllister, president of MacAllister. “We continue to grow,and our presence in Washington for 28 years is based on theexcellent local workforce that serves our mining customerstwenty four-seven. Centralizing component rebuild workfrom around the state in Washington leverages that excellentworkforce and creates economies of scale,” he said.MacAllister, which currently employs nearly 100 associ-
ates in Daviess County, plans to begin hiring additional man-agement, service and customer service personnel to coincidewith the completion of the expansion.The Indiana Economic Development Corporation offered
MacAllister Machinery Company Inc. up to $700,000 inconditional tax credits and up to $100,000 in training grantsbased on the company’s job creation plans. These tax creditsare performance-based, meaning until Hoosiers are hired, thecompany is not eligible to claim incentives. Daviess Countywill consider additional property tax abatement at the requestof the Daviess County Economic Development Corporation.Radius I Indiana also is supporting the project.“We are excited and grateful to MacAllister for this invest-
ment in our community. The city is happy to help this expan-sion become a reality,” said Washington Mayor JoeWellman.In 2010, MacAllister inked an agreement with Whayne
Supply to serve as a Mirenco dealer in northern and centralIndiana. For more information, visit www.iedc.in.gov.
MacAllister Machinery...
Family-Owned CatDealer Expands inWashington, Ind.
SECT IONAttachments
Genesis GSG Scrap GrappleNow Available in Six SizesGenesis Attachments has added two sizes to
its GSG scrap grapple line, increasing thenumber of models to six.The orange-peel type scrap grapples are
now available in 2.0 and 2.5 cu. yd. (1.5 and1.9 cu m ) sizes in addition to the .75 to 1.5 cu.yd. (.6 to 1.2 cu m ) models originally offered.Designed to reduce maintenance, improve
durability, lower operating costs and enhancesafety, the Genesis Scrap Grapple features:• Identical hardened steel bearings with dust
seals at all pivot points to keep out contami-nants• A heavy-duty cylinder guarding system
that protects the cylinders and internal compo-nents and is easily removed for maintenance• Reverse-mounted cylinders that protect
rods from damage• Large-bore hydraulic cylinders to maxi-
mize clamping force• Long-life, abrasion-resistant steel tips that
are easily replaced with a simple perimeterweld. “Increasing the number of models was the
next logical step in the GSG evolution,” saidDan Raihala, Genesis design engineer.“Coupled with the GSG’s low maintenancefeatures, larger capacity grapples will enableGenesis customers to further increase produc-tivity.”Genesis also offers a wide tine variety with
flat bottom or pointed tine shapes, and threespade types — half-, narrow- and wide-widthto meet specific application needs.Additional GSG features include large-
diameter hardened steel pins with integratedshear-proof retainers, high-torque 360 degreecontinuous rotation for better material accessand placement, and an overall footprintdesigned to easily fit inside trailers.For more information, visit genesisattach-
ments.com.
The orange-peeltype scrap grap-ples are now avail-able in 2.0 and 2.5cu. yd. (1.5 and 1.9cu m ) sizes inaddition to the .75to 1.5 cu. yd. (.6 to1.2 cu m ) modelsoriginally offered.
Allied’s AMS Series MobileShears Pack Tons of ForceAllied Construction Products LLC has added AMS series mobile shears to its full-
product line. These all-new Allied AMS series mobile shears are specifically designed
and built for scrap processing, industrial contracting and demolition appli-cations. Allied’s newest full-product line addition, the AMS seriesmobile shears are available in four models (AMS 30, AMS 40, AMS50 and AMS 100) ranging from 721 to 1,446 tons (654 to 1,312 t) ofcutting force.Key features of the AMS series are:• Increased pin diameter allows for greater cutting force• Faster cycle times from an integrated speed valve
mean lower costs per ton• Increased speed on 360
degree rotation offers greateroperator flexibility• Four-way indexable cut-
ting blades can cut on allfour cutting edges• Bolt-on bracket allows
for mounting on most excava-tors• Integrated speed
valve is more com-pact and is com-prised of only 13parts• Manufactured
with light weightWeldox 900 mate-rial increasesstrength and fueleconomy• Auto-Guide mechanism delivers
force on upper jaw preventing flex-ing• High-Top design protects the
cylinder from debris The AMS series mobile shears easily handle material processing applications includ-
ing:• Ferrous and non-ferrous scrap processing• Auto and truck dismantling• Civil and industrial demolition• Tank and silo dismantling• Wire and pipe processing• Wheel and tire processingFor more information, call 216/431-2600 or visit www.AlliedCp.com.
Pages 37-43
Page 38 • November 10, 2012 • www.constructionequipmentguide.com • Attachment Section • Construction Equipment Guide
Rake Attachments Simplify Landscaping Challenges
By Mike McSorleySPECIAL TO CEG
Deciding how to tackle the landscaping jobs ahead of you,no matter what time of year, can be tough. Several types ofrake attachments are available and, depending on your jobrequirements, each offers specific benefits. Finding the rightrake attachment for your needs can increase your productiv-
ity, allowing you to move on to your next job quicker — ulti-mately increasing your profit.
Site CleanupWhen starting a landscape project, you first need to create
manageable soil if it isn’t already present. Grader rakeattachments feature strong, evenly spaced tines designed toseparate debris for site cleanup and scarify and level com-
pacted soils. Grader rakes are best for applications that require the
clearing of coarse materials such as sticks, bricks, rocks androots on a job site. It is not recommended for preparing soilfor grass seeding because its tines create long striations thatallow seed to fall too far into the ground, creating stripes ina lawn, a landscaping faux pas.
Grader rakes can typically be adjusted to better suit spe-cific tasks. For instance, using the attachment for rough lev-eling or scarification may require a different rake angle orattachment to the wheel arm than if you are using it to pushlarge quantities of loose material. Read your operator’s man-ual for the proper positioning for each task.
Soil PreparationOnce you’ve cleared away excess debris from your job
site and have it leveled to the appropriate grade, you canbegin preparing your soil for seeding. Auto rakes utilize abucket with either a rake chain or a bar with teeth on it toremove smaller rocks and debris from loose soil and sift thesurface layer of the soil to effectively groom and finish it forseed or sod. Unlike the grader rake, an auto rake can collect,transport and dump debris quickly and easily.
Before using an auto rake attachment, be sure that the areais free of all boulders larger than roughly 6 in. in diameter,logs and large tree branches, wire, lumber and any other itemthat is too large for the bucket or could get wrapped aroundthe rake chain. It also is important to make sure that the soilis relatively loose and that any compacted areas have beentilled with another piece of equipment to a depth of 2 in. ordeeper. Attempting to pick up large debris with an auto rakeattachment or using it to till compacted soil is not recom-mended and could severely damage the attachment.
The Triple Threat A preparator rake attachment can be your best friend in
soil preparation. This one attachment combines the cleanup,rock removal and soil preparation capabilities of the graderrake and auto rake into one easy-to-maneuver rake attach-ment. Its rotating bi-directional drum carries rocks and debrisinto the perforated bucket, which efficiently sifts dirt to till
The FFC grader rake’s tines scarify and level hard-packed soil when grading.The Harley power seeder, combined with the Harley power box rake, is ideal forseeding grasses and lawn mixtures over large areas with precise control.
see LANDSCAPING page 40
FFC AutoRakes groom and finishsoil for seed or sod.
Construction Equipment Guide • Attachment Section • www.constructionequipmentguide.com • November 10, 2012 • Page 39
EXPECT BIG THINGS.
Quarry, road-building, and mass-excavation work demand seriousiron. With more arm diggingforce, bucket digging force, andhydraulic flow, 670G LC and870G LC Excavators deliverincreased productivity. So you’llget more done per gallon of fuel.Their rugged EPA Interim Tier4/EU Stage IIIB diesels enableyou to work, wherever the work,even in nonattainment areas.These, plus numerous other cus-tomer-inspired refinements —including an even more spaciouscab and an enhanced multifunc-tion LCD monitor with simplifiednavigation — help your operatormake the most of every day.
www.holtequipment.net
Bowling Green, KY42101
270/842-34001-866/528-9699
London, KY 606/862-8447
1-877/231-7151
Louisville, KY 40223502/253-3721
1-800/507-9705
Richmond, KY859/623-2030
1-800/463-8722
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989/777-0090
Fax: 989/777-1583
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616/538-2400
Fax: 616/538-0449
3600 North Grand RiverAve
Lansing, MI 48906517/321-8000
Fax: 517/321-6275
Northeast Detroit65809 Gratiot AveLenox, MI 48050
586/727-7502Fax: 586/727-7311
West Detroit56555 Pontiac Trail
New Hudson, MI 48165 248/437-8121
1-800/457-8121
Traverse City8300 M-72 East
Williamsburg, MI 49690231/267-5060
Fax: 231/267-5257
Naperville, IL 60563630/355-7150
Fax: 630/355-7173
Rockdale, IL 60436815/730-9011
1-800/937-3355Fax: 815/730-9036
Rockford, IL 60012815/961-3160
Fax: 815/965-1810
South Holland, IL 60473708/331-6362
Fax: 708/331-7334
Wauconda, IL 60084847/526-7700
Fax: 847/526-3565
Bloomington, IN 47403812/333-9677
Fax: 812/333-9731
Fort Wayne, IN 46825260/482-8576
Fax: 260/483-4057
Indianapolis, IN 46219317/544-3411
Fax: 317/544-3420
Lafayette, IN 47905765/447-6933
Fax: 765/448-9038
South Bend, IN 46619574/232-1461
Fax: 574/233-3324
Des Moines, IA800/822-2212
Fort Dodge, IA800/362-2487
Sioux City, IA800/352-4693
Waterloo, IA800/772-2019
Dodge City, KS800/794-0172
Great Bend, KS800/264-4056
Park City, KS800/262-0139
Topeka, KS800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434
Springfield, MO888/306-2656
Gering, NE800/205-6784
Grand Island, NE800/868-4017
Lincoln, NE800/416-5518
North Platte, NE800/894-7060
Omaha, NE800/416-5095
Brunswick, OH800/716-9796
Cambridge, OH740/439-2747
Canton, OH866/235-0438
Chillicothe, OH740/663-5300
Cincinnati, OH800/844-3734
Columbus, OH800/222-2010
Lima, OH800/423-7445
Painesville, OH866/800-1398
Poland (Youngstown),OH
866/503-7259
Vandalia (Dayton), OH800/233-4228
Cranberry Twp, PA724/776-3636
Delmont, PA724/837-4500
www.westsidetractorsales.com www.murphytractor.com
Page 40 • November 10, 2012 • www.constructionequipmentguide.com • Attachment Section • Construction Equipment Guide
Proper Attachments Up Productivity,Profitability for Landscaping Workand fluff the ground as it grooms the soil. Use a preparator rake for the following tasks without
switching between attachments:• Rock Collection — Collect large rocks and debris rest-
ing on the soil surface.• Foliage Removal — Uproot and collect foliage that is
growing or has been growing on the soil surface. • Soil Tillage — Till the soil to create a looser soil condi-
tion. • Roughing — Rake rocks, debris and foliage, scarify and
fill depressions in tilled or untilled soil.Each time your soil conditions or the task you are per-
forming changes, you may need to reposition your prepara-tor rake’s skid shoes to achieve the best results. For foliagecollection and work on very loose soil, rotor teeth should bepositioned just above the skid shoes. When using the attach-ment to uproot foliage or till hard soil, rotor teeth should bepositioned about 2 in. below the skid shoes. Consult youroperator’s manual for exact placement of skid shoes.
Most Versatile Rake Attachment AroundIf you’re in charge of a landscaping project from start to
finish, a power rake attachment can help you increase pro-ductivity and profitability. Power rakes combine four attach-ments into one, allowing you to grade, level, rake, removedebris and prepare bare ground for seed or sod. Power rakesalso can be used to dethatch and remove old lawns andweeds for lawn renovations. Power rake attachments are equipped with rollers that
have a specially shaped carbide tooth design and pattern thatreleases the optimal amount of moisture from the soil, creat-ing the perfect seedbed. Its rugged barrier adjusts so the oper-ator can choose the amount of material left in the seedbeddepending on the soil moisture conditions — allowing forfaster drying in wet and muddy conditions. The barrier’sflexibility makes it possible for material such as roots andlarge tree limbs to pass through the attachment without com-promising or stressing the attachment. The combination ofthis barrier and the attachment’s end plates lets you control,deflect and direct materials similar to how a plow movessnow. Dual, independently self-adjusting gauge wheels con-tour to the ground and provide added flexibility for an evencut on drainage grades and small slopes. Power rakes are versatile enough that they can accomplish
the following tasks and more, all without ever switchingbetween attachments:• Condition wet, weedy soil• Mill material for dense backfill• Smooth out infields at ballparks• Renovate existing turf• Remove rocks, tree limbs, weeds and other debris• Prepare bare ground for sod or seed• Make drainage grades• Maintain dirt and gravel roads • Dethatch tired lawnsFor added convenience, many power rakes have the abil-
ity to work with a power seeder to sow seed in the ground asit is being prepared. For example, Harley offers its powerseeder and power box rake attachments as complementarylandscaping tools for tractors. The Harley power seeder
attaches behind the power box rake to accurately distributeseed onto the prepared soil.Choosing the right rake attachment can be the difference
between a landscaping nightmare and a dream come true.Whether you’re solely responsible for the clearing of a siteor have the task of seeing a landscaping project through to itscompletion, there is a rake attachment that can increase yourproductivity. Evaluate your job requirements and soil condi-tions to determine which is best for your needs.
Mike McSorley is a product support and training repre-sentative of Paladin Attachments, which includes Harley andFFC Attachments, based in Dexter, Mich. For more infor-mation, visit www.paladinattachments.com.µ
The FFC Preparator combines site cleanup, rockremoval and soil preparation all into one attachment.
The Harley power box rake grades, removes rocksand debris and prepares soil in one pass.
LANDSCAPING from page 38
BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 Fax Lexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 Fax Indianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax
CONTINENTAL EQUIPMENT CORP.A division of AISwww.aisequip.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191
ROAD MACHINERY & SUPPLIES CO.www.rmsequipment.com5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8671800/888-9535Virginia MN218/741-9011800/752-4304Des Moines IA218/741-9011800/555-1445Sioux City IA712/252-0538800/633-9104Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114
ROAD BUILDERSMACHINERY & SUPPLY CO., INC.1001 S. 7th St. TrafficwayKansas City, KS 66105913/371-3822913/371-3870 FaxOmaha, NE402/331-9200Lincoln, NE402/325-0447Grand Island, NE308/384-2620
RMS RENTALS12520 Quentin Ave. So, Ste 100Savage, MN 55378952/895-9595800/888-9515
Construction Equipment Guide • Attachment Section • www.constructionequipmentguide.com • November 10, 2012 • Page 41
www.komatsuamerica.com
From Komatsu - The Green ExpertsHYBRID EXCAVATOR
.komatsuamerica.comwww.komatsuamerica.com
ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711Bolingbrook, IL630/739-7474Carterville, IL618/985-3399Marengo, IL815/923-4966Portage, IN219/764-8080Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056DePere, WI920/532-0165920/532-0526 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville WI 262/835-2710262/835-2844 Fax Schofield, WI715/355-9898715/241-0044 Fax
GENERAL EQUIPMENT & SUPPLIESwww.genequip.com4300 W Main AveFargo ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND 58072800/825-04792300 Vermont AvenueBismarck ND 58504800/279-4437
Page 42 • November 10, 2012 • www.constructionequipmentguide.com • Attachment Section • Construction Equipment Guide
Construction Equipment Guide • Attachment Section • www.constructionequipmentguide.com • November 10, 2012 • Page 43
small step no. 34
TAKE A SMALL STEP TO GET HEALTHY
www.smallstep.gov
FETCH THIS PAPER YOURSELF
Ref#: 211169
BurrisEquipment Co.2216 N. Green Bay Rd.Waukegan, IL 60087
847/336-1205Fax 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041
815/363-4100Fax 815/363-4109
10351 W. Laraway Rd.Frankfort, IL 60423
815/464-6650Fax 815/464-6951
www.kubota.com
1st ChoiceEquipment LLC124 N. Schmale Rd.Carol Stream, IL 60188
630/510-6050Fax 630/510-6051
1305 Sentry DriveWaukesha, WI 53186
262/521-5802Fax 262/521-5801
Birkey’sConstructionEquipment
1801 E. University Ave.Urbana, IL 61802
800/798-1772Fax: 217/337-1775
2900 E. Jackson St.Macomb, IL 61455
888/360-9225
200 North St.Prophetstown, IL 61277
877/221-0881
EVERYTHING YOU VALUE
®
visit: www.digrock.come-mail: [email protected]
call to order:866-928-5800 or 508-829-4855
"Leader in Excavator Rock Ripping Attachments"eadingdge
ttachments,
Inc.
Multi-ply Your Money!®
with theexcavator
rock rippingMulti-Ripper
Multi-Ripper Bucketor the
Multi-Ripper BucketMulti-Ripper
TM
"the greatestadvancement I have seenfor excavating rock!" Ronnie Lewis, Lewis Contractors, Inc.
Maximize forceone tooth at a time,using our patented
"Shanks on an Arc"technology.
Rip the Rockinstead of Blastingor Hammering
Hi-CapMulti-Ripper
Bucket
Multi-Ripper
6 to 9 times the forceof a standard 5 tooth bucket 4 times faster than a hammerRips the sides and bottom of thetrench flat, with no depth limitation
Celebrating our 10th YearDesigning Innovative Products
Made In USA!
PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996
ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!
Page 44 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Price Slide Rail System Assists Price-Gregory InternationalBy Thomas A. MarciniakSPECIAL TO CEG
When you were younger, playing hideand seek was fun — when you are lookingfor a 36 in. (91.4 cm) pipe with a 42 in. (76.2cm) casting and a 30 in. (76.2 cm) pipe witha 36 in. (91.4 cm) casting that is causing ashort on active fuel lines at a depth of 20 ft.(6.1 m), it really isn’t that fun of a game.That is what Price-Gregory Internationalwas faced with on a site in Lisle, Ill.To meet this challenge, Price-Gregory
International met with Scott Gross and ToddLarsen of Lee Jensen Sales Company Inc.,Pro-Tec Equipment’s exclusive dealer in thegreater Chicago area, and two of Pro-TecEquipment’s Slide Rail staff, Josh Brownand Joshua Thorne. “Before we arrived at the site, my previ-
ous conversations with Price-GregoryInternational had us thinking that this jobwas going to be a multiple bore pit job or atight sheeting job,” said Gross. “When I got to the job-site, right away the
overhead power lines stuck out as a mainissue we had to take note of.” said JoshBrown, Pro-Tec Equipment Slide Rail siteconsultant. “It was decided right away thatfor Price-Gregory International to do this jobproperly, they couldn’t do it with tight sheet-ing, there just wasn’t enough vertical clear-ance to do so.”“Once the decision was to go with the
slide rail system, Joshua Thorne suggestedusing the Utility Panel Guide System. Thatsystem truly made the job a whole lot easierand faster” Gross said.With everything, there is a learning curve.
This applies to the Slide Rail System as well.Even though the system looks similar to atrench shield system, the installation andremoval are done differently, and requiremore precision.
The Pro-Tec Equipment Utility PanelGuide System is part of the Slide RailShoring System, which is a modular, dig andpush shoring system. The system is installedfrom the top down and removed from thebottom up, minimizing the size of excava-tions, soil disturbances, and restoration timeand cost. The installation is done with lowvibration, providing soil support for excava-tions, adjacent structures and existing utili-ties. The Utility Panel Guide System allowsthose existing utilities to enter and exit theexcavation site, and also provide a means forboring operations to take place in a safe andshored excavation.Using a Cat 345 and a Kobelco 350 exca-
vator to do the heavy lifting, the installationof the system proceeded slower than usualdue to the use of a hyrdo-vac truck and handdigging every couple feet to try and exposethe two active lines that were the cause of the
job. The system used on this job measured20 ft.-wide (6.1 m) by 40 ft.-long (12.2 m)and more than 20 ft. deep (6.1 m).“The next time we use a slide rail system,
I will be able to send out a smaller crew forthe install and removal,” said Buck Hines,job superintendent, Price-GregoryInternational. “With our learning curve, theinstallation process took a little while, but thenext one will be able to get done a lot quick-er.”With every excavation project, safety
should be the number one concern. Thisproject was no different. Along with the safe-ty of the crew that would be working insidethe Slide Rail System, concern had to bepaid to the proximity of the MortonArboretum and a nearby active highway.“When I was down in the hole, with the
Slide Rail System in place, I felt safe downthere,” said Hines. “We had all the local firedepartments and other safety people out tothe site, they were all pleased with the lookand the safety the Slide Rail System provid-ed.”When asked about his overall thoughts on
the Slide Rail System, Hines said, “with anydeep excavation, you are going to needsomething, whether it is slip-sheeting, tightsheeting or this Slide Rail System. Afterusing the Slide Rail System, I like it betterthan any of the other options. I would rec-ommend this system and plan on using itagain.”For more information, visit www.pro-
tecequipment.com, www.leejensensales.comor www.pricegregory.com.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
The Pro-Tec Equipment Utility PanelGuide System is part of the Slide RailShoring System, which is a modular, digand push shoring system.
The Utility Panel Guide System allows those existing utilities to enter and exit theexcavation site, and also provide a means for boring operations to take place in asafe and shored excavation.
The system is installed from the top down and removed from the bottom up, mini-mizing the size of excavations, soil disturbances, and restoration time and cost.
Pages 45-49
Snow and Ice Section
ScoopDogg Snow Pushers Are Strong Solutions for ClearingScoopDogg snow pushers from Buyers Products offer
durable snow moving solutions for loaders, backhoes, skid-steers and compact equipment. The ScoopDogg line includes 18 sizes of snow pushers
for clearing snow fromlarge areas.
Loader and backhoe ScoopDogg models feature anextreme-duty H-beam design with 12-in. (30.5 cm) pushbeam for added support. Extreme-duty upper and lowerposts and wear shoes on both models support the snow push-ers, giving them strength and long product life, according to
the manufacturer.Skid steer and compact
models are designed withextra-durable inside poststhat are fully welded to pro-
vide push strength.Both models areequipped with pre-mium rubber com-pound cutting edgesand universal, quickcoupler attach-ments.
“ScoopDogg snow pushers are compatiblewith a number of loader, backhoe, skid steer and compact
equipment so that our customers can easily convert theirexisting industrial vehicles into snow removal machines,”said Brian Smith, marketing manager at Buyers Products. ScoopDogg snow pushers are made with durable materi-
als with a safety orange powder coat finish, providing corro-sion resistance. All ScoopDogg products are designed forextreme-duty operation, making them ideal for clearingsnow from airports, shopping malls and other large lots.ScoopDogg snow pushers are made in the United States.
About Buyers ProductsEstablished in 1946, Buyers Products Company is a man-
ufacturer of products for the mobile equipment industry.Buyers manufactures a full line of truck accessories andequipment including its SnowDogg line of snow plows,ScoopDogg line of snow pushers, SaltDogg line of saltspreaders, DumperDogg dump inserts and a comprehensiveline of toolboxes. For more information, visit www.buyersproducts.com.
The Fisher XTREMEV V-plow features fast hydraulics and the Minute Mount 2on/off system. The plow is available in 7½ to 9½ ft. (2.3 to 2.9 m) sizes, in stainless or poly-coat-
ed steel, and features INTENSIFIRE lights for maximum illumination.For more information, visit www.fisherplows.com.
Fisher XTREMEV V-PlowHandles Tough Jobs
Page 46 • November 10, 2012 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
Wing Provides Straight Blade
The Wide-Out adjustable-wing snowplow provides an 8-ft. (2.4 m) straight blade, 9-ft. (2.7 m) scoop and 10-ft. (3 m) extended straight blade, all in the same plow. Plus,with the leading wing angled forward, it provides enhanced windrowing efficiency.The wings hydraulically and independently extend with the touch of a button forincreased carrying capacity and versatility.
For more information, visit www.westernplows.com.
Blizzard Speedwing Angles
The Blizzard Speedwing thinks for itself with wings that automatically angle for-ward or back, based on blade position, to maximize plowing efficiency. Whenangled for windrowing, the trailing wing folds back in line with the moldboardwhile the leading wing retains its forward position to capture more snow, reducespill-off and allow use of the entire blade.
For more information, visit www.blizzardplows.com.
NEW! XTENDOR® CUTTING EDGE SYSTEM
FOR LIGHT-DUTY TRUCKS
Eliminates Blade Changes For The Season!
Heavy-Duty Plowmarkers With Every System.
FREE!
Comes With All-In-One Easy-To-Assemble Package.
www.WinterEquipment.com
800-294-6837 FAX: 888-810-9363A GREEN COMPANYDoing our part to create
a clean, new world.
Heavy-DutyPlowmarkers With Every System.
!EEFR
800-294-6837 AX: 888-8 F
810-9363ANYEEN COMPRA G
Doing our part to create a clean, new world.
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • November 10, 2012 • Page 47
Page 48 • November 10, 2012 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
What makes a curious reader?You do.
Read to your child today and inspire a lifelong love of reading.
w w w. r e a d . g o v
TRIPLETHREAT.
NOTHING’S TOUGHER, SMARTER OR FASTER than THE BOSS XT line of plows, including the NEW Poly Power-V XT. A rock-solid combination of professional-grade toughness, Power-V versatility and super-slick poly effi ciency, the newest XT is unlike any plow in the industry. But that’s no surprise coming from THE BOSS. We’ve been driving the industry forward for 24 years with products that make your job faster and easier. Simple as 1-2-3.
THE BOSS XT PLOWS:• NEW Poly Power-V XT… 8'2" 9'2"• Steel Power-V XT……… 8'2" 9'2"• Super-Duty XT…………. 8'0" 8'6" 9'0"
Taller blade and enhanced curl• 37" tall fl ared blade wings on Power-V models• High-performance cutting edge•
• SmartHitch® 2 • SmartLight™ 2 • SmartTouch® 2 • SmartShield®
b o s s p l o w . c o m
( D E A L E R I M P R I N T )
STOP IN TODAY!
©2009 BOSS Products/Northern Star Industries, Inc.
•
• SmartLight™
b
• SmartLight™
©2009 BOSS Products/Northern Star Industries, Inc.
•
CRYSTEEL TRUCK EQUIPMENT52248 Ember Rd.
PO Box 733Lake Crystal, MN 56055
800-722-0588
1130 73rd Ave. N.E.Fridley, MN 55432800-795-1280
www.crysteeltruck.com
TOPPERS PLUS1929 E. Madison Ave.Mankato, MN 56001
800-321-7587www.toppersplus.com
CANNON TRUCK EQUIPMENT
51761 Danview Technology CourtShelby Twp., MI 48315
586-991-0054Fax: 586-991-0074
www.cannonequip.com
VISIT OUR WEBSITE TODAY! www.stonebrookeequipment.com
CALL US TODAY! 877.224.0440
14311 Ewing Avenue, Burnsville, MN 55306 | [email protected] | 952.224.4440
The Midwest’s Truck Equipment Superstore!
www.stonebrookeequipment.comVISIT OUR WEBSI www.stonebrookeequipment.com
ITE TODAY!AY! CA 877.224.0440
ALL US TODAY!
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • November 10, 2012 • Page 49
HIG
H-P
ERFO
RM
AN
CE
CO
MM
ERC
IAL
PLO
WS TRIP-EDGE
C-PLOWS
FULL-TRIP CONVENTIONAL PLOWS
SPR
EAD
ERS
STRENGTH &PERFORMANCE Hiniker offers a comprehensive line of professional grade snowplows to meet the demands of the toughest conditions and snowplow operations.
VF-PLOWS: Trip-edge design gives smooth operation and effective protection with a nine-inch high pivot point. Double acting cylinders provide positive moldboard position control. Now available in fl ared-wing and fl at-top confi gurations.
C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks.
SCOOP PLOWS: High capacity concave shape captures snow to effi ciently clear lots and parking areas. Angles left or right for conventional plowing.
CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.
SPREADERS: Snow removal contractors looking for additional profits will find them in ice control. Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Choose between OHV gas engine spreaders or dual-motor electric spreaders.
TRIP-EDGE CONVENTIONAL PLOWS
TRIP-EDGE SCOOP PLOWS
HINIKER COMPANYhiniker
SPREADERSDUAL-MOTOR ELECTRIC
VF Series Flare-wing, Trip-edge V-Plow
New!
HIG
H-P
ERFO
RM
AN
CE
CO
MM
ERC
IAL
PLO
WS TRIP-EDGE
C-PLOWS
PERFORMANCEHiniker offers a comprehensive line of comprehensive line professional grade snowplows to meet the demands of the toughest gradeconditions and snowplow operations.
VF-PLOWS: Trip-edge design gives smooth operation and effective protection with a nine-inch high pivot point. Double acting cylinders provide positive moldboard position control. Now available in fl ared-wing and fl at-top confi gurations.
C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge C-PLOWS:conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks.
SCOOP PLOWS: High capacity concave shape captures snow to effi ciently clear lots and parking areas. Angles left or right for conventional plowing.
CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.
SPREADERS: Snow removal contractors looking for additional profits will find them in ice control. Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Choose between OHV gas engine spreaders or dual-motor electric spreaders.
PERFORMANCEHiniker offers a gradeconditions and snowplow operations.
VF-PLOWS:protection with a nine-inch high pivot point.cylinders provide positive moldboard position control. Now available in fl ared-wing and fl at-top confi gurations.
C-PLOWS:conventional plow plus the added versatility of a high performance backdrag plow. and loading docks.
SCOOP PLOWS:effi ciently clear lots and parking areas. Angles left or right for
HIG
H-P
ERFO
RM
AN
CE
CO
MM
ERC
IAL
PLO
WS TRIP-EDGE
C-PLOWS
FULL-TRIP CONVENTIONAL PLOWS
conventional plowing.
CONVENTIONAL PLOWS:deep snow off quickly and efficiently.
cylinders provide positive moldboard position control. Now available in fl ared-wing and fl at-top confi gurations.
C-PLOWS:conventional plow plus the added versatility of a high performance backdrag plow. and loading docks.
SCOOP PLOWS:effi ciently clear lots and parking areas. Angles left or right for
TRIP-EDGEC-PLOWS
STRENGTH &PERFORMANCESTRENGTH PERFORMANCE
C-PLOWS
TRIP-EDGE CONVENTIONAL PLOWS
TRIP-EDGE SCOOP PLOWS
SPR
EAD
ERS
HINIKER COMPANYhiniker
SPREADERSDUAL-MOTOR ELECTRIC
VF Series VF Series Flare-wing, Trip-edge V-Plow
New!New!New! TOPPERS PLUS1929 East Madison Ave.Mankato, MN 56001
507-387-7376
800-321-7587
www.toppersplus.com
TRUCK UTILITIES2370 English St.,
St. Paul, MN 55109651-484-3305
800-869-1075
2770 5th Ave S., Fargo, ND 58103701-241-9411
800-972-9250
www.truckutilities.com
Page 50 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Terex Cranes WaverlyWaverly, IA Tel 319 352 3920 • Fax [email protected]
W
© 2008 Terex Corporation • Terex is a registered trademark ofTerex Corporation in the United States of America and many other countries.
Other Terex® Cranes Products:Telescopic Truck Cranes
Boom Trucks
All Terrain Cranes
Crawler Cranes
Lattice Boom Truck Cranes
Tower Cranes
Rough Terrain Cranes
Tough and rugged, the Terex® RT 130 is the crane of choicefor the most demanding rough terrain applications.
RTL Equipment Inc.3000 SE Gateway Drive
Grimes, IA 50111515-986-0262
Fax: 515-986-0267
2601 120th St. NWSwisher, IA 52338319-857-4045
Fax: 928-441-1269
Custom Truck & Equipment7701 Highway 24
Kansas City, MO 64125800-861-1065
www.cte-equipment.com
All Erection & Crane Rental Corp.4700 Acorn Dr.
Independence, OH 44131800-232-4100
Fax: 216-642-7633www.allcrane.com
BRANCH LOCATIONSAll Crane Rental of PA, LLC
Pennsylvania412-382-4200
All Crane & Equipment Rental Corp.West Virginia304-766-0300
Dawes Rigging & Crane Rental, Inc.Wisconsin
414-453-5335
Jeffers Crane Service, Inc.Michigan
419-693-0421
For Your Local Terex Dealer, Please Contact:
Waverly Operations106 12th Street S.E.
Waverly, IA 50677 USAPhone: (319) 352-3920Fax: (319) 352-9395
email: [email protected]: http://www.terex-cranes.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 51
Built from a lineage of market leaders for over 60+ years
ILLINOISBIRKEY'S CONST.
EQUIPMENTconstruction.birkeys.com
Galesburg(309) 341-4360Bloomington
(309) 827-0520Mattoon
(217) 235-3158Urbana
(217) 337-1781
DIAMOND EQUIPMENTwww.diamondequipment.com
Mt. Vernon(618) 242-2273
ILLINOISWEST SIDE TRACTOR SALESwww.westsidetractorsales.com
Naperville(630) 355-7150
Rockdale(815) 730-9011
Rockford(815) 961-3160South Holland(708) 331-6362
Wauconda(847) 526-7700
MINNESOTAZIEGLER CAT
www.ZieglerCAT.comMinneapolis
(800) 352-2812Brainerd
(877) 829-9850Buhl
(800) 446-9795Columbus
(866) 982-5656Crookston
(800) 422-5782Duluth
(800) 421-3831Fergus Falls
(800) 346-7649Jackson
(866) 847-6401
MINNESOTAZIEGLER CATMarshall
(800) 325-4929North Mankato(877) 845-3938
Rochester(800) 247-1068
Shakopee(800) 352-2812
St. Cloud(800) 522-9469
WISCONSINMILLER-BRADFORD
& RISBERG INC.www.miller-bradford.com
Madison800-585-7219Eau Claire
800-585-7232DePere
800-638-7448Abbotsford
888-886-4410
MISSOURIFABICK CAT
www.fabickcat.comFenton
(636) 343-5900Fenton
(rental services)(636) 343-5905Cape Girardeau(573) 332-1122
Columbia(573) 442-6880
Foristell(800) 539-9217Jefferson City(573) 636-3184
Joplin(417) 624-3010Springfield
(417) 866-6651Springfield
(rental services)(417) 866-2100
INDIANADIAMOND EQUIPMENT
www.diamondequipment.comEvansville
(812) 425-4428
MACALLISTER MACHINERYSALES/RENTALS
www.macallister.comIndianapolis
(317) 545-2151Indianapolis
(317) 244-RENT (7368)Fort Wayne
(260) 483-6469 (heavy equip.)
(260) 969-3322 (rental store)Lafayette
(765) 449-8191 (heavy equipment)(765) 446-5600 (rental Store)
INDIANAMACALLISTER MACHINERY
SALES/RENTALSTerre Haute
(812) 478-3155(heavy equipment)
(812) 231-6000 (rental store)South Bend
(574) 288-6622Washington
(812) 254-1712Bicknell
(812) 735-0286Bloomington
(812) 349-9220Fishers
(317) 598-9700Greensburg
(812) 663-5829Richmond
(765) 966-0626Yorktown
(765) 759-2CAT (2228)
IOWAZIEGLER CAT
Altoona800-342-7002
Atlantic877-547-3819Sioux City
712-252-4401Fort Dodge
800-342-1848Mason City
800-342-1849Postville
800-526-0889
KENTUCKYDIAMOND EQUIPMENT
www.diamondequipment.comBowling Green(270) 781-1061
OHIO CATwww.OhioCAT.com
Richwood(888) 446-4658
WILSON EQUIPMENT CO.www.wilsonequipment.com
Corbin(606) 528-0700
Lexington(859) 254-6443Prestonsburg(606) 874-8036
MICHIGANMILLER-BRADFORD
& RISBERG, INC.www.miller-bradford.com
Negaunee800-562-9770
OHIOOHIO CAT
www.OhioCAT.comBroadview Heights(800) 837-6200Sharonville
(888) 332-4658 (Sales & Service)
(888) RENT-441 (Rental)Columbus
(888) 441-4658 (Sales &Service)
(888) RENT-441 (Rental)Perrysburg
(888) 339-4658 (Sales & Service)
(888) RENT-441 (Rental)
OHIOOHIO CAT
Troy(888) 330-4658Youngstown
(800) 837-6203Cadiz
(800) 837-6204Canton
(800) 837-6207Zanesville
(800) 837-6205N. Canton
(888) 736-8443Oakwood Village(800) 633-1020
Page 52 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ron HargroveB&H Contracting, Pensacola, FL
“ We’ve been running our machines since 1996 with no major equipment failures.”
Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2012 Doosan Infracore Construction Equipment America. All rights reserved. | 1012635
Scan the code and see what your local Doosan dealer can do for you.www.DoosanEquipment.com/dealer
Powerful, productive machines that have incredible uptime and ease of maintenance. With the industry’s only 48-hour parts guarantee, Doosan support can’t be beat. Doosan Delivers.
.ta bebe-8 4yy 4lon ameitupufrewoP
.srevlie Dnasoo D
,eetnarau gstr paurhonnaetnia mff m oesa edn a
inehca mevitducor p,l
oe chn tacS
’na ctorpp sunasoo D,yrtsudn ieh thti W.ecnebldiernc ieav htah tsine
eed sne ado
t’s’y
e
e whd tnuors aeirtnuocsooe Dhd tnn aasooD
piuqn Eoitcurtsnoe Crocarfnn Iasoo2 D102. ©dlroe w. ipron Casoof Ds okramedard teretsigee rro agon las
qEnasooD.www
n daer clead lurr lo y ohatwoe chn tacS
536210. | 1devreses rthgil rl. Aaciremt Anempr ehts ouoirad vns aetatd Setine Uhn t. i
relade/omc.tnpmeui
.uor y yooo f fon dnaoso Dll Daco l
eed sne ado
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 53
ILLINOISChristofano Equipment Company
Chicago Ridge
www.christofano.com
Luby EquipmentQuincy
www.lubyequipment.com
INDIANARonson Equipment Co, LLC
Lowell
www.ronsonequipment.com
IOWARTL Equipment Inc.
Grimes
Swisher
www.rtlequipment.com
KANSASSellers Equipment, Inc.
Wichita
www.sellersequipment.com
MICHIGAN Carleton Equipment Company, Inc.
Kalamazoo
Grand Rapids
Livonia
Saginaw
www.carletonequipment.com
MINNESOTALano Equipment, Inc.
Shakopee
Anoka
www.lanoequip.com
MISSOURICustom Truck & Equimpent, LLC
Kansas City
cte-equipment.com
Luby EquipmentCape Girardeau
www.lubyequipment.com
NEBRASKABobcat of Omaha
Omaha
www.omaha-tractor.com
NORTH DAKOTABobcat of Grand Forks
Grand Forks
www.bobcatofgrandforks.com
Bobcat of Devils LakeDevils Lake
www.bobcatofdevilslake.com
Bobcat of WillistonWilliston
www.bobcatofwilliston.com
OHIOGibson Machinery LLC
Cleveland
www.gibsonmachinery.com
Bobcat Enterprises, IncCincinnati
Hilliard
www.bobcat-ent.com
SOUTH DAKOTADiesel Machinery Inc.
Sioux Falls
Rapid City
Aberdeen
www.dieselmachinery.com
WISCONSINSwiderski Equipment, Inc.
Mosinee
Wausau
Thorp
Antigo
Waupaca
www.swiderskiequipment.com
Contact Your Local Authorized Doosan Dealer
Page 54 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ASA Midwest Council Officials Receive Prestigious HonorsThe national American Subcontractors Association (ASA)
recently recognized ASA Midwest Council ExecutiveDirector Susan Winkelmann as the “New Executive Directorof the Year” and past ASA Midwest Council President A.J.Ford as “Chapter President of the Year” during a recentawards ceremony in Alexandria, Va. The event was held inconjunction with the ASA Champions Academy. The ASA Task Force on Chapter Services, composed of
ASA members and chapter executives from across the coun-try, selected Winkelmann and Ford for the honors.Winkelmann was given the prestigious award for demon-
strating outstanding performance in overall association man-agement during her first 12 months as an executive directorwith an ASA chapter. Hired by ASA in Sept. 2011, Winkelmann previously
served as a community volunteer for four years, three yearsas a business manager for Wink, Inc. in St. Louis and 11years for Reebok in Chicago, Ill., and St. Louis, Mo. “Our New Executive Director of the Year had the chal-
lenge of earning the respect and proving value in an era when
every member firm is evaluating every expense,” said ChipRohrbach, ASA task force on chapter services co-chairman,FA Rohrbach, Allentown, Pa.“According to the nominator, our winner ‘quickly gained
respect with her diligent work ethic and attitude.’ And, hesaid, through the transition, ‘we did not have a hiccup or ball
dropped, even with our aggressive schedule of meetings andnew programs.’”A.J. Ford is vice president of marketing and sales for
Budrovich Contracting, St. Louis’ largest crane rental com-pany. As ASA Midwest Council president 2011-2012, Fordwas recognized for his superior leadership efforts in moti-vating the chapter’s leaders and staff to achieve the associa-tion’s goals.“This includes more than just presiding over meetings,”
said Rohrbach, who presented the award. “It also includeshelping to establish goals that are a stretch and then guidingand cajoling chapter leaders to attain those goals.”Ford established clear goals for the ASA-Midwest
Council:• Help members be smarter business people.• Position the chapter as the voice of the subcontracting
community.• Provide networking opportunities for members to share
information and drive fair competition with general contrac-tors.• Provide regular communication with and meaningful
service to members.• “Our 2011-12 President of the Year achieved all of this
and more, all while working closely to transition to a newexecutive director,” Rohrbach said.
About the American Subcontractors Association
Founded in 1966, ASA amplifies the voice of, and leads,trade contractors to improve the business environment forthe construction industry and to serve as a steward for thecommunity. ASA’s vision is to be the united voice dedicatedto improving the business environment in the constructionindustry. The ideals and beliefs of ASA are ethical and equi-table business practices, quality construction, a safe andhealthy work environment, and integrity and membershipdiversity.For more information, visit www.asamidwest.com.
The national American Subcontractors Association(ASA) recently recognized ASA Midwest CouncilExecutive Director Susan Winkelmann as the “NewExecutive Director of the Year.”
A.J. Ford was recognized as “Chapter President of theYear” for his superior leadership efforts in motivatingthe chapter’s leaders and staff to achieve the associa-tion’s goals.
Sales of New Homes Remained Near Two-Year High in Aug.signs that the housing market is making asustained comeback. Sales of new homes remained near a two-
year high in August. And home prices rosenationwide in July compared with a year ear-lier, according to the Standard &Poor’s/Case-Shiller index. That was the sec-
ond straight year-over-year gain. Construction of single-family homes rose
in August to the fastest annual rate in morethan two years. Home sales have been boosted by ultra-
low mortgage rates. A limited supply ofhomes for sale also has helped drive pricesup.
Despite the positive strides, sales of newhomes and the pace of new constructionremain well short of levels consideredhealthy. And while many economists antici-pate the turnaround will continue gainingmomentum next year, the housing marketisn’t expected to recover fully until jobgrowth improves and the unemployment
rate, now at 7.8 percent, declines further. Though new homes represent less than 20
percent of the housing sales market, theyhave an outsize impact on the economy.Each home built creates an average of threejobs for a year and generates about $90,000in tax revenue, according to the NAHB’sdata.
HOMES from page 1
“Our new Executive Directorhad the challenge of earning the respect andproving value in an erawhen every member firm isevaluating every expense.”
Chip RohrbachFA Rohrbach
Lokotrack LT106 Jaw Plant Features Increase Efficiency
The LT106 jaw plant has new features that deliver higher capacity and lower operating costs.
Feed hopper sides and locking mecha-nism are hydraulically operated.
Pages 55-71
Crushing, Screening & Recycling SectionMetso’s Lokotrack LT106 jaw plant has new
features designed to deliver higher productivityat lower cost per ton. The updated LT106 has arobust crusher drive and heavy-duty air filtra-tion system with pre-cleaner requiring lessmaintenance. High-inertia flywheels meanfewer power peaks, so the engine consistentlyoperates at optimum speed, lowering fuel con-sumption by as much as 25 to 30 percent,according to the manufacturer.
Improved PerformanceThe LT106 is built around Metso’s C106 jaw,
featuring a 42 by 28 in. (106 by 71 cm) crush-ing chamber for high output. The LT106 also isfitted with an aggressive vibrating feeder. Anadvanced Metso IC700 control and monitoringsystem with ultrasonic level sensor automati-cally adjusts feed rate for peak productivity.
A new hydraulic system, coupled with anenvironmentally friendly, low-emission CatC9.3 Tier IV or C9 Tier III engine and high-inertiaflywheels, offers fuel efficiency of 4 to 6gal. (17 to 22 L) per hour on average withoutcompromising process flexibility, safety ordurability of the hydraulic drive.
Setting Standards in MobilityThe Lokotrack LT106’s compact dimensions
and agility on tracks mean lower transport costsbetween and within crushing sites. The chassisdesign, with good clearance on both ends,enables safe and easy loading onto a trailer. Theunit is ready for crushing or transport withinminutes, due to the feed hopper with a safehydraulic securing system and radial side con-veyor.
Safe and Easy to OperateNew design features, such as engine and fly-
wheel composite covers, together with largeservice platforms and accessibility make dailyoperations safe and easy.
“There are so many things you can point tothat make this new Lokotrack LT106 betterthan the previous one,” said Tommi Lehtonen,Metso vice president, mobiles. “It is complete-ly re-engineered, design work was driven byour close relationship with our customers, andthe result is a more efficient, reliable and pro-ductive machine. Naturally, we made it thesafest machine to operate in the industry.”
For more information, visitwww.metso.com.
Page 56 • November 10, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Powerscreen Warrior 1400XOffers Easier ServiceabilityPowerscreen, a provider of mobile crush-
ing and screening equipment, launched thenew Warrior 1400X screen.Damian Power, Powerscreen global
product director said: “The newPowerscreen Warrior 1400X offersimproved performance, lower operatingcosts and easier serviceability while build-ing on the reliable foundation of our class-leading Warrior 1400 scalper.”The 1400X has been designed with econ-
omy in mind. With reduced engine runningspeed and enhanced hydraulics, the 1400Xoffers a reduction in fuel consumption of upto 15 percent in comparison to its predeces-sor. This can translate into a substantialfinancial saving for customers over the life-time of the machine.Improved versatility and design specifi-
cations are other key achievements of theWarrior 1400X, with the screening anglerange widening of 13 to 19 degrees.Standard stockpiling capacity on all con-veyors has increased by up to 25 percent.With the chassis riser option and the tele-scopic side conveyor option, the fines andmid-grade stockpiling capacity is increasedto more than double that of a standard
Warrior 1400, according to the manufactur-er.Time required for set-up and shutdown is
faster than the previous model, which willbe of particular benefit to contractors.Serviceability features include a screen boxraise function and the ability to raise thecollection conveyor. Optimal chute designin conjunction with the new feeder under-tray slide-out feature will minimize anypotential spillage and reduce any harmfulmaterial build-up around the machine.The Warrior 1400X now boasts
improved mobility with a two speed track-ing system as standard. The high speedmode is further enhanced with automaticengine speed ramp-up making the 1400Xthe fastest tracked machine in its range,according to the manufacturer.The Warrior 1400X can be fitted with
either a Tier III/Stage 3A Caterpillar C4.4ATAAC — 4 cylinder diesel engine devel-oping 120 hp (90 kW) at 1800 rpm, or aTier IVi/Stage 3B Caterpillar C4.4 — 4cylinder diesel engine developing 110 hp(82 kW) at 1800 rpm.For more information, visit
www.powerscreen.com.
The Warrior 1400X can be fitted with either a Tier III/Stage 3A Caterpillar C4.4ATAAC — 4 cylinder diesel engine developing 120 hp (90 kW) at 1800 rpm, or a TierIVi/Stage 3B Caterpillar C4.4 - 4 cylinder diesel engine developing 110 hp (82 kW)at 1800 rpm.
Born to ROC
Engineered for heavy duty operations and tough conditions
Looking for a partner you can trust?
The Atlas Copco PowerROC E-series rigs are tough, reliable and uncomplicated, and come equipped with essential technology for higher productivity, low maintenance and quality drilling. And the design never loses sight of operator safety and ergonomics.
The PowerROC E-series—ready to ROC.
800-732-6762www.atlascopco.us
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 10, 2012 • Page 57
CALL 1-800-227-0534 OR 502-326-9300POWERSCREEN CRUSHING & SCREENING
11901 WESTPORT ROAD, LOUISVILLE, KY 40245
PARTS IN STOCK FOR ALL CRUSHING AND SCREENING EQUIPMENT.
WWW.POWERSCREENSALES.COMOVER 80 UNITS IN OUR RENTAL FLEET. CRUSHERS, SCREENERS, AND CONVEYORS.USED EQUIPMENT SPECIALS.
Page 58 • November 10, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
www.superior-ind.com
KING OF THE HILL
At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determi-nation and energized by progress. How can we help you?
Proud partners of General Equipment & Supplies
Fargo, ND4300 Main Ave.Fargo, ND 58103800-437-2924Local: 701-282-2662Fax: 701-364-2190
Sioux Falls, SD3902 N Jessica Ave.Sioux Falls, SD 57104Local: 605-336-9000Fax: 605-336-0073
Bismarck, ND2300 Vermont Ave.Bismarck, ND 58504800-279-4437Local: 701-223-9700Fax: 701-223-4815
Shakopee, MN4600 Valley Industrial Blvd SShakopee, MN 55379800-966-1455Local: 952-224-1500Fax: 952-224-1570
Minot, ND905 20th Ave. SEMinot, ND 58701800-825-0479Local: 701-852-0479Fax: 701-852-1451
www.whayne.com1400 Cecil Ave. • Louisville, KY
502-774-4441
www.fabco.com11200 W. Silver Spring Rd. • Milwaukee, WI 53225
414-461-9100 • Fax: 414-461-8899
www.ohiocat.com
Ashland, KY606-928-3444
Bowling Green, KY270-843-3275
Corbin, KY606-528-3140Dry Ridge, KY859-823-1500Evansville, IN812-425-4651
Hazard, KY606-439-4040Lexington, KY859-254-2756Paducah, KY
270-443-3631Pikeville, KY
606-437-6265
Cleveland, OH440-526-6200800-837-6200
Fax: 440-526-9513Cadiz, OH
740-942-4626800-837-6204
Fax: 740-942-4029Canton, OH
330-478-6525800-837-6207
Fax: 330-478-6529Cincinnati, OH513-771-0515888-332-4658
Fax: 513-672-7658Columbus, OH614-878-2287888-441-4658
Fax: 614-851-5015
Toledo, (Perrysburg) OH419-874-7975888-339-4658
Fax: 419-873-8255Troy, OH
937-335-7660888-330-4658
Fax: 937-335-6447Youngstown, OH330-530-9010800-837-6203
Fax: 330-530-9102Zanesville, OH740-453-0563800-837-6205
Fax: 740-452-3605Richwood, KY859-372-4665888-446-4658
Fax: 740-452-3605
Madison, WI608-271-6200LaCrosse, WI608-783-4891Eau Claire, WI715-832-6647Wausau, WI
715-359-6220
Green Bay, WI920-498-8000Superior, WI
715-398-9696Marquette, MI906-475-4191
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 10, 2012 • Page 59
Innovative American made no compromise
Join the revolution715-395-6060 www.exodusmachinesinc.com superior, wisconsin
BIG. Bad. fast. strong.
AVAILABLE.
The MX457130K lbs. 300 hp. 13,430lb@60’. 63’ 5” reach.
www.macallister.com7515 East 30th St.
Indianapolis, IN 46219800-382-1896Fort Wayne, IN800-944-0847South Bend
800-685-9849Lafayette, IN
800-283-4231Washington, IN800-932-5120Terre Haute, IN800-273-5650
www.fabickcat.comOne Fabick DriveFenton, MO 64026
800-845-9188St. Louis, MO866-531-3242Foristell, MO
800-539-9217Columbia, MO800-791-5401
Jefferson City, MO800-845-9177Springfield, MO888-959-2100Joplin, MO
866-313-1748Willow Springs, MO
866-628-1717Cape Girardeau, MO
800-845-9175Marion, IL
800-845-9179Metropolis, IL866-299-6044Salem, IL
800-845-9176Troy, IL
866-345-5681Mt. Carmel, IL888-769-7247
Page 60 • November 10, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Grasan Mobile Screen Plants Available in Sundry Sizes
Grasan mobile screen plants are availableup to 8 by 24 ft. (2.4 by 7.3 m) size withinclined screens and up to 7 by 20 ft. (2 by 6m) size with horizontal screens. Inclinedunits can be equipped with spray bars andslurry flume for washing applications.Grasan plants can be custom designed towork with varying quarry layouts or existingequipment and optional blending gates andvarious cross belt configurations are avail-able. Both horizontal and inclined units canbe supplied with fold-down feed boxes tominimize setup time.
Mobile units are designed for high mobil-ity with fast setup, according to the manu-facturer. The horizontal screen plant is driven into
place under the feed conveyor and the legsare blocked. No other setup procedure isrequired. Optional hydraulic outrigger legsmake setup even easier and screens aremounted on single-, tandem- or triple-axletrailers. Standard equipment includes fifth wheel
kingpin hitch, dual 11:00 x 22.5 tires, airbrakes, signal lights and mud flaps. Units are
designed with ample room under the dis-charge chutes for radial stackers or transferconveyors.Body frames are fabricated with high-
strength wide flange beams, include walk-ways with access ladders and have fixed orfolding support legs. Feed boxes and dis-charge chutes have wear liners, and theentire chute assembly removes easily in one
piece for maintenance. There is an oversizeelectric motor for fast start-up in cold weath-er. The fines-gathering conveyor andreversible side discharge conveyor(s) comecomplete with discharge chutes andadjustable belt scraper on fines conveyorminimizes clean-up.For more information, call 419/526-4440
or visit www.grasan.com.
Mobile units are designed for high mobility with fast setup, according to the manu-facturer.
Grasan mobile screen plants are available up to 8 by 24 ft. (2.4 by 7.3 m) size withinclined screens and up to 7 by 20 ft. (2 by 6 m) size with horizontal screens.
The Vermeer BC900XL features a large 9 by 14-in. (23 by 35.6 cm) feed opening to help boost pro-ductivity by reducing the need to trim heavilybranched material before feeding it into the chip-per. A 33-in.-diameter (83.8 cm) disc rotates at1,400 rpm and features two steel chipper kniveswith two usable cutting edges each. Two shear barsalso have two usable edges to help extend wearlife.Another feature — the SmartFeed system —
monitors engine rpm and automatically stops andreverses the single horizontal feed roller whenfeeding larger, hardwood material, helping toenhance chipping productivity. A 40 hp (29.8 kW)Kohler Command CH1000 gas engine providesthe power to pull and process difficult branchmaterial. The engine also offers a no-spill oil-filter-change feature for ease of serviceability.The Vermeer BC900XL is equipped with safety
features such as a long feed table design, bottomfeed stop bar and a four-position feed control bar.The bottom feed stop bar is strategically located tomake it possible for the operator’s leg to strike thebar and shut off the feed, either intentionally orautomatically, in an emergency situation.For more information, visit www.vermeer.com.
BC900XL Brush Chipper Features Large Feed Opening
The Vermeer BC900XL features a large 9 by 14-in. (23 by 35.6 cm) feed opening to help boost productivity by reducingthe need to trim heavily branched material before feeding it into the chipper.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 10, 2012 • Page 61
Lokotrack LT120 jaw plant
The new Lokotrack LT120 jaw plant
Reliable crushing powersolid d e
he e LT
elia ab Rw waotally neience with a tsolid exper
est jas lat’etsoT120, Motrack L LT120, Mok
eliable crushing poT otrack L LT120 jaokw Lhe neT
he Tingy of thinkw waw plant, combines est ja
erweliable crushing pow plantT120 ja
E-m mai
et tso Mcommpthe oughest applications tgennerou T. yesu ult r
solid d e
.com.nam@metsomineralsE-mail:
.ouor near yibutetso distro leTTo leart. o transport and easy tcompac
e and s . Saf fe and simple toughest applications, boosts preed openingous 47 x 34" f feed openinggener
w C120 ja, all-nehe dependableTer and morweliable crushing poesult is r
w waotally neience with a tsolid exper
t a , contacen moro lear, eo operate and simple t
y in tivitoduc, boosts pr, with its w crusherw C120 ja
or e uptime f for er and morhe T. ingy of thinkw wa
wwww om.c.metsow
BUTLER MACHINERY CO.www.butlermachinery.com
3402 36th St. SWFargo, ND 58014
701-280-3100
800-726-7475
3630 Miriam Ave.Bismarck, ND 58501
701-223-0890
2803 I-94 BusinessLoop E
Dickinson, ND 58601701-456-1400
1201 S. 46th St.Grand Forks, ND 58201
701-775-4238
1505 Hwy 2, Bypass EMinot, ND 58701
701-852-3508
4950 E Highway 12Aberdeen SD 57401
605-225-6240
3601 Deadwood Ave. NRapid City, SD 57702
605-342-4850
20571 Truck Stop Ave.Pierre, SD 57501
605-224-5400
3201 N. Louise Ave.Sioux Falls, SD 57107
605-336-3010
RB SCOTT COMPANY INC.
www.rbscott.com1011 Short St.
Eau Claire, WI 54701715-832-9292
Fax: 715-832-7767
CENTRAL SERVICE &
SUPPLY, INC.www.centralsands.com
1701 SE Hulsizer Rd.Ankeny, IA 50021
515-964-8600
Fax: 515-964-3314
PROCESSMACHINERY INC.www.processmachinery.com
1636 Isaac Shelby DriveShelbyville, KY 40065
800-860-1523
860 Kaderly DriveColumbus, OH 43228
866-249-4330
ROAD BUILDERSMACHINERY &
SUPPLY CO., INC.www.roadbuildersmachinery.com
1001 S. 7th St. TrafficwayKansas City, KS 66105
913-371-3822
Fax: 913-371-3870
4115 S. 90th St.Omaha, NE
402-331-9200
5601 Fletcher Ave.Lincoln, NE
402-325-0447
4949 Juergen Rd.Grand Island, NE
308-384-2620
AIS CONSTRUCTION
EQUIPMENTCORP.
3600 N. Grand River Ave.Lansing, MI 48906
517-321-8000
Fax: 517-321-4191
www.aisequip.com
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot AvenueLenox, MI 48050
586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit, MI56555 Pontiac Trail
New Hudson, MI 48165248-437-8121
800-457-8121
816 N. Dirksen ParkwaySpringfield, IL 62702
217-789-7711Fax: 217-744-7314
220 E. Frontage Rd.Bolingbrook, IL 60440
630-739-7474Fax: 630-739-9443
18210 Beck Rd.Marengo, IL 60152815-923-4966
Fax: 815-923-4973
1505 Donna DriveCarterville, IL 62918
618-985-3399Fax: 618-985-2992
6450 Melton Rd.Portage, IN 46368219-764-8080
Fax: 219-764-8613
4670 Crossroads Industrial Dr.Bridgeton, MO 63044
314-291-1330Fax: 314-291-8050
4110 I-70 Drive SoutheastColumbia, MO 65201
573-814-0083Fax: 573-814-0087
3364 Percy DriveCape Girardeau, MO 63702
573-334-5252Fax: 573-334-1887
701 Industrial DrivePalmyra, MO 63461
573-769-2056Fax: 573-769-2059
ROLAND MACHINERY CO.www.rolandmachinery.com
Page 62 • November 10, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 10, 2012 • Page 63
Page 64 • November 10, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
W.S. Tyler Pro-Deck Vibrating ScreenOptimizes Maximum Productivity
W.S. Tyler’s Pro-Deck System is a new approach to max-imizing a screening system. The Pro-Deck approach imple-ments an analysis and modification strategy in processingoperations to maximize screen productivity and minimizewear by selecting the appropriate type of screen mediaaccording to the three phases of screening. This consultativeapproach results in a fully optimized screening process forgreater efficiency and productivity, as well as less unsched-uled maintenance and extended screen life, according to themanufacturer.The Pro-Deck is not based on a canned formula but rather
implements a customized approach for each plant’s specificneeds. It combines W.S. Tyler’s years of screening expertisewith an analytical approach to determine the best mix ofscreen media for each individual operation. Traditionally,processing operations tend to use the same screen media oneach deck of the vibrating screen. But after extensiveresearch and years of experience, W.S. Tyler concluded thata non-traditional approach of incorporating more than onescreen media serves to prevent lost efficiency and unsched-uled maintenance. Additionally, the Pro-Deck system helpsto eliminate common screening problems such as blinding,pegging, premature wear and unscheduled downtime.Material traveling over a screen undergoes three different
phases. W.S. Tyler calls these phases layered, basic and sharpscreening phase. With each phase of the screening function-ing differently, a customized screen media approach helpstailor the screen media to each phase accounting for the twomost important factors in screen media — open area andwear life.In addition to considering the phases of screening, the Pro-
Deck approach also evaluates material characteristics, thecurrent functioning of the plant and final output qualities toensure the best blending of screen media. Adjustments to thescreen media are made one section at a time and results areclosely monitored to ensure the highest quality output and
maximum productivity. With analysis of material character-istics and adapting the screen media to accommodate wet,dry or even abrasive materials, the Pro-Deck approachbecomes a scientific approach to screen media. The Tyler Pro-Deck approach begins with an onsite visit
to the vibrating screen. Using its self-developed vibrationanalysis tool available, W.S. Tyler’s screening experts ensurethat the machine is working within operational parametersthat cater to the application requirements of the material. Thescreening expert then determines the critical deck and sec-tion(s) within the screen. On the basis of screen performanceas well as the wear experienced on the section(s) and deck, arecommendation for screen media modification is made.Upon installation of the new screen media, the results aremeasured and documented and the focus is laid on the nextsection(s). This process continues until all recommendationsare implemented to the screen. This step by step approachensures that the customer’s product quality is only positive-ly enhanced and never negatively affected. In addition itallows the customer to verify the new performance and wearadvantages continuously.The Pro-Deck approach can be applied to any vibrating
screen unit in virtually any application. A large variety ofscreen media in combination with the vbration analysis per-formance tool make Pro-Deck a comprehensive and com-plete approach, according to the manufacturer. The W.S. Tyler screen media offering consists of a com-
plete package and includes a variety of products from wovenwire cloth and specialty Cobra Vibe to polyurethane panelsand the Ty-Wire hybrid screen. W.S. Tyler is a member of the wholly owned German-
based Haver & Tyler Processing Technology Alliance, and amanufacturer, systems provider and specialist in the screen-ing, washing and pelletizing industry. For more information, call 800/325-5993 or visit
www.wstyler.ca.
The Pro-Deck approach implements an analysis and modification strategy in processing operations to maxi-mize screen productivity and minimize wear by selecting the appropriate type of screen media according to thethree phases of screening.
Ed Turner, president and CEO, Allied ConstructionProducts LLC, has announced the addition of Sal LaCorte tothe position of shear and demolition manager. In his newposition, LaCorte will be responsible for the development ofthe sales activity for the attachments in Allied’s non-impacttools division including mobile shears and contractor’smechanical grapples. LaCorte is a veteran of the construction equipment indus-
try with more than 20 years in the industry, which includes aprevious stint at Allied as internal sales manager. His experi-ence at the manufacturing level includes product engineeringsystems design, territorial field sales management and OEMsales management. LaCorte has served on the Institute ofScrap Recycling Industries Inc.’s (ISRI) GovernmentRelations and Convention Committee and the AssociatedEquipment Distributors (AED) Government RelationsCommittee.Through more than 200 U.S. and Canadian distributors,
Allied offers a complete line of excavator, loader/backhoe,skid steer and mini-excavator mounted attachments, station-ary rock breaking systems and material handling systems.For more information, call 216/431-2600 or visit
www.AlliedCP.com.
Sal LaCorte will be responsible for the development ofthe sales activity for the attachments in Allied’s non-impact tools division including mobile shears and con-tractor’s mechanical grapples.
Sal LaCorte NamedAllied’s Shear andDemolition Manager
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 10, 2012 • Page 65
5050 N. River Rd.Schiller Park, IL 60176
847-678-3633Fax: 847-678-3587
Mokena, IL708-596-8050
West Chicago, IL630-293-0606
Wauconda, IL847-526-4255
Yorkville, IL630-553-0150
www.atlasbobcat.com
White Star MachineryLeslie Equipment Company
3223 N. HydraulicWichita, KS 67219
800-950-3321316-838-3321
Manhattan, KS785-537-9979
Topeka, KS785-232-7731
Garden City, KS620-277-2290
www.whitestarmachinery.com
Cowen, WV304-226-3299Beaver, WV
304-255-1525Cross Lanes, WV
304-204-1818Fairmont, WV304-534-5454
Norton, WV304-636-6421Pikeville, KY
606-432-0321Marietta, OH
740-373-5255
www.lec1.com
Bandit of Ohio
230 W. Greenwich RoadSeville, OH 44273
330-338-3992Fax: 330-695-2020
110 N. Diagonal St.Fredricksburg, OH
330-466-4345
Page 66 • November 10, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
For more information!REMU USA Inc. [email protected] +1 888 600 0018www.remu.fi
Would you like to produce top quality topsoil?
See our solution atwww.remu.fi/info fill in the form and we will send you the video to show you how.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 10, 2012 • Page 67
CUSTOMERFINANCINGAVAILABLE
Please contact us for details of your nearest dealersSandv ik Construc t ion1- 80 0 - 826 -7625in fo.smc-us @ sandv ik .comw w w.construc t ion.sandv ik .com
QH440 Mobile Cone Crusher Raising the standard
This new member of the Sandvik mobile range features the Sandvik CH440 cone crusher at its core. It can be fed material of up to 215mm and has a CSS range from 8 to 48mm. Supplied with a choice of six crushing chambers, together with eight bush settings, ranging from 16 to 44mm, the product shape and grading can be easily adjusted by changing the throw to ensure the machine can provide the exact quality and production required at very high reduction ratios. The QH440 has a variety of optional extras to suit all climates and needs and is supported by the renowned Sandvik global after sales service.
Remote camera ensures full visibility of crushing chamberIncreased automation for ease of operation
Page 68 • November 10, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Superior Industries Return Roll Extends Conveyor Belt LifeSuperior Industries’ Urathon Return Roll sheds sticky material, ensuring
smoother conveyor belt alignment and less belt damage, making it ideal foruse in the mining, aggregates and other bulk material handling industries.Constructed of heavy-duty 87A durometer urethane, Urathon return rollersoffer up to three times the life of rubber disc-style idlers, and are availablein standard and spiral disc options.The Urathon return roll’s non-stick properties prevent build-up of wet and
sticky material on the roller discs, leading to smoother operation, greaterproductivity and minimized belt damage, according to the manufacturer. Material build-up is the leading cause of conveyor belt mistracking and
damage. When excessive material accumulates, rollers can double in size,which can cause issues with belt alignment that lead to downtime. In severecases, the rollers become so weighed down by excess material that they stopworking altogether. As the belt continues to slide over the stalled rollers,expensive ripping and other damage can occur. The Urathon return roller also reduces downtime for changeouts and
excessive maintenance, minimizing overall costs. Both rolls are self-clean-ing, and the spiral style offers an added cleaning action on the underside ofthe belt to further reduce maintenance requirements caused by carrybackmaterial. The standard roll is available in a 5, 6, or 7-in. diameters (12.7, 15.2, 17.8
cm), while the spiral roll is offered in a 6-in. (15.2 cm) diameter. Both mod-els are compatible with conveyor belts ranging from 18 to 96 in. (45.7 to243.8 cm) in width, and CEMA load rated at E, D, C or B.Superior Industries manufactures stackers, transfer conveyors, stationary
systems, idlers, pulleys and accessories. Superior Industries, established in 1972, is headquartered in Morris,
Minn., and manufactures from two additional plants in Arizona andGeorgia. For more information, visit www.superior-ind.com.
Constructed of heavy-duty 87A durometer urethane, Urathon return rollers offer up to three timesthe life of rubber disc-style idlers and are available in standard and spiral disc options.-
Kolberg-Pioneer Helps in Efforts to Raise $20K for EmployeeThrough charitable employee and community contribu-
tions, local manufacturer Kolberg-Pioneer Inc. was able tohelp in efforts to raise more than $20,000 for employeeLinda Stock, who has worked for the company since 1987in the technical publications department and was diag-nosed in July with a blood cancer called MyelodysplasticSyndrome. Several fundraising efforts were held, including selling
“Team Stock” bracelets, holding raffles, splitting proceedswith local artisan Jean Koupel, working with Scentsy andTupperware consultants who donated proceeds, and host-ing a community benefit at Rounding 3rd in downtownYankton. More than 400 people attended the benefit, andwere entertained by the band “Mrs. Begley and the Boys,”which donated its time for the event.“Because of all of the bills that piled up due to testing
and treatments, we decided to try to help out Linda asmuch as we could,” said Casey Sloan, who works inService at Kolberg-Pioneer. “Linda is extremely gratefulfor everyone’s support — every little bit helped.”Stock, who will have a bone marrow transplant in
October, will undergo chemo treatments in Omaha, Neb.,for a few months, and hopefully return to Yankton inFebruary.“I’ve realized through all of this how great KPI and its
employees are, as well as the community of Yankton andall of my friends and family,” Stock said. “I’d like to thankeveryone for their support — it means so much!”For more information, call 605/668-2524 or visit
www.kpijci.com.
Through charitable employee and community contributions, Kolberg-Pioneer Inc. was able to help in efforts toraise more than $20,000 for employee Linda Stock. (L-R, front): Marsha Moser and Heather Jensen. (L-R, back):Shelley Kemnitz, Linda Stock, Casey Sloan, Kristi Christiansen and Jill Stanage. Not pictured: Stacy Ryken.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 10, 2012 • Page 69
POWERFULrack machines provide thGlobal T Track machines provide the
heaviest & most productive componentsto help you conquer your toughest jobs.
TL
The
LGT
POWERFULrack machines provide the
heaviest & most productive componentsto help you conquer your toughest jobs.
TLINLINET
to help you conquer your toughest jobs.
ABLEPORTTABLErack series machines are sGlobal T Track series machines are sleeker
and more compact, making them easy tot to and around any job site.transpor
ABLPROFITTABLErack systems are desAll Global T Track systems are designed
to be 100% compatible with each otherfectCombine them to build the per
to help you conquer your toughest jobs.
rack series machines are sleekerand more compact, making them easy to
t to and around any job site.
ABLErack systems are designed
. ch other r.fect
fectCombine them to build the persystem for your operation.
fect
racks provide both job site mobility asTwell as the foundation required to isolateplant vibration.
r
racks provide both job site mobility aswell as the foundation required to isolate
n more: wwwLog on, lear
r
.kpijci.com. more: www w.kpijci.com.
GT145S Screen
12500 SouthCicero Ave.
Alsip, IL708/389-7700
Villa Park, IL630/530-7600
Rockford, IL815/227-0555
East Peoria, IL309/694-4455
Springfield, IL217/789-0351
Crunch Time.
genesisattachments.com
© 2012 Genesis Attachments, LLC
M
Whether you have to cut it, break it, or
grab it, we have the tool for the job.
Sargents equipment carries the full line
of Genesis attachments for both sale or
rent.
Visit our website to see our current
inventory. www.sargentsequipment.com
Main Location:
281 E. Sauk Trail • So. Chicago Heights. IL • 708-758-2062
Branch:
155 Industrial Dr. • Gilberts, IL • 847-844-4131
Page 70 • November 10, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
KNOWING YOUR OWN HEALTH IS JUST AS IMPORTANT.
All sports fans follow their favorite players’ health. However, not all fans pay enough attention to their own.
For a complete list of the tests you need, and when you need them, go to www.AHRQ.gov/realmen
Alonzo MourningKidney Disease
Ray Lewis Torn Triceps
Willis McGahee Broken Ribs
Adam MorrisonType 1 Diabetes
Lance ArmstrongTesticular Cancer
Torn Rotator Cuff
Steve McNairTorn Biceps
Francisco Liriano Torn UCL
Mario LemieuxHodgkin’s Disease
NenêTesticular Cancer
Eric DavisColon Cancer
Brandeis Machinery & Supply Co.www.brandeismachinery.com
Evansville, IN(812) 425-4491Ft. Wayne, IN
(260) 489- 4551Indianapolis, IN(317) 872-8410
Corbin, KY(606) 528-3700Lexington, KY(859) 259-3456Louisville, KY(502) 491-4000Paducah, KY
(270) 444-8390Stanville, KY
(606) 478-9201
Gibson Machinery LLCwww.gibsonmachinery.com
Oakwood Village (Cleveland) OH(440) 439-4000Pittsburgh, PA(724) 695-5000
6
EXTERNALLY ADJUSTABLE
BREAKAWAYTORQUE LIMITER
lll dlw Mee nd thengie desv’eW
d odg tod HooL WX008 3®krabrow M
fifr odenirl gatnozirot hese be tho bg t
kl yln fi.etkrae mn thr o
ORQUE LIMITERTKBREAY ADJUSTEXTERNALLLY ADJUST
ORQUE LIMITERYAAYWWAAAWKKA
ABLEY ADJUST TABLE
apd snm aoordaef howl tanoisaccn ot asuj
netsisnoe crod a mnad bnl aeehw-deee fth
curr tuos yllt fis it asas faaercny illacitamarl dli wtI
m ford fetcetors pL iX008e 3h – T
.kroo we tcan cau cod yn. Abmur thuof yk oaew
d Cetargetnk Irabroe Mh – T
.tcudord pnt enes fuounitnon a ct iluesn riahc-tlevisesrgge aro, mrgera– A l
s.kcd ony atciapan coitcudorr puoe ys
oitulot sese by ths btcejn obgierom f
es atare ge thcivrey sltneinevnon co mu tos ywollm aetsyl Sortnod C
taer, gnoitcudorr pehgith hid weet dndenepdend inl alimremmae hv
n fiau coo y, sycnecififg enitarepd o
atsujdy allanretxn e: aelbaliavn ao
g unidnate slihs wremmad hnes ae bp theed knn aoitcudore pzimixa
, ycneicfifl eeur fens orotoe mvirt d
setkcor puol yln fi
yawakaere blb
ytnelth pi, wpthil wlut flee b
r mut ouboe arorn maeLL WX008 3®rkbaro MehT
.emitnwes dosaercdeet rar thetimie luqrot
e pvisnetxr eud ons aenihcar mnil lluf a ft oras pog iood HL W
.deaolrevn oehy wltnatsnes isaelm ford fetcetors pL iX008e 3h – T
C.RKARBOM.WWWW.EINLLL UFHE SEE T
t wk arowtet nrpoput scuodre prl gairtsudny itud-yvaef he on
; thenigne eg thnillatt suothid wdeoitulot sese by ths btcejn obgierom f
MOCT A ATE 6
LA
.mock.rarbom.wwt we ihn tr iedaee lhm tos frredni
aitnetoes pcudey rltnacfiingis si; thatsujdy allanretxn e: aelbaliavn ao
6 ELBAILAVVAAAVSLEDOM
.yrtsudne i
dnge aamal dayawakaere blb
DUILB
TAATER CTAHTTNEMPUIQ EINGD
SEITIUNTROPP OSET
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 10, 2012 • Page 71
SENNEBOGEN green line material handling machines make your competitors “green with envy”SENNEBOGEN green line material handling machines make your competitors “green with envy”
High Productivity – Low Operating Costs
Wixom, MI 248-449-6700
Muskegon, MI231-798-8754
Kentwood, MI616-698-2960
Battle Creek, MI269-965-1269
Romulus, MI734-641-8238
Saginaw, MI989-752-9400
Sterling Hts, MI586-977-6000
Zeeland, MI616-748-4108
Lansing, MI517-272-5033
Wixom, MI (Cons. Division)248-356-5200
Byron Center, MI616-878-7450
Louisville, KY 502-491-4000
Evansville, IN812-425-4491
Corbin, KY606-528-3700
Lexington, KY859-259-3456
Stanville, KY606-478-9201
Paducah, KY270-444-8390
Indianapolis, IN317-872-8410
Ft.Wayne, IN260-489-4551
HOWELL TRACTOR &EQUIPMENT
LLCwww.howelltractor.com
Gary,IN800-852-8816
Peru, IL800-342-6072
GIBSON MACHINERY
LLCwww.gibson
machinery.com
Oakwood Village,OH
440-439-4000
Pittsburgh, PA 724-695-5000
Carterville, IL618/985-3399
Bridgeton, MO314-291-1330
Columbia, MO573-814-0083
Cape Girardeau, MO573-334-5252
Palmyra, MO573-769-2056
Franksville, WI262-835-2710
DePere, WI920-532-0165
DeForest, WI608-842-4151
Eau Claire, WI715-874-5400
Schofield, WI715-355-9898
Escanaba, MI906-786-6920
THE VICTOR L.PHILLIPS CO.
www.vlpco.com
Kansas City, MO 800-878-9290
Joplin, MO800-878-8223
Brookline Station,MO
800-955-2729
Wichita, KS800-878-3346
Topeka, KS800-878-4345
Garden City, KS 800-511-1435
Savage, MN 800-888-9515
Des Moines, IA 800-555-1445
Cedar Rapids, IA 800-616-6615
Sioux City, IA 800-633-9104
Milan, IL 800-633-9114
Duluth, MN 800-888-9535
Virginia, MN 800-752-4304
Bismark, ND800-247-1282
Dickinson, ND888-418-2873
Fargo, ND800-342-4330
Omaha, NE866-733-1100
Minot, ND701-852-3188
Rapid City, SD888-388-0266
Sioux Falls, SD800-262-5373
Williston, ND877-570-4635
Lincoln, NE866-801-6261
ALTA EQUIPMENT COMPANYwww.altaconstructionequipment.com
BRANDEIS MACHINERY & SUPPLY COMPANY
www.brandeismachinery.com
ROLAND MACHINERY CO.www.rolandmachinery.com
ROAD MACHINERY & SUPPLIES CO.
www.rmsequipment.com
TITAN MACHINERYwww.titanmachinery.com
Page 72 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
STAR EQUIPMENT LTD.1401 2ND AVENUE
DES MOINES, IA 50314(515) 283-2215
FAX: (515) 283-0295(800) 369-2215
2625 W. AIRLINE HWY.WATERLOO, IA 50703(319) 236-6830
FAX: (319) 236-6834(800) 791-9249
2950 6TH STREET SWCEDAR RAPIDS, IA 52404
(319) 365-5139FAX: (319) 365-6726(800) 728-5139
2100 E. LINCOLN WAY
AMES, IA 50010(515) 233-9500
FAX: (515) 233-9505(866) 856-2312
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 73
Aspen Equipment Co.
9150 Pillsbury Ave. SBloomington, MN 55420
(952) 888-2525
McAllisterEquipment Co.
150 E. North Ave.Villa Park, IL 60181
(630) 530-7600(630) 530-1901Alsip/Chicago, IL(708) 389-7700
E. Peoria, IL(309) 694-4455
Rockford, IL(815) 227-0555Springfield, IL
(217) 789-0351
4670 Crossroads Industrial DriveBridgeton, MO
(314) 291-1330Cape Girardeau, MO
(573) 334-5252Columbia, MO
(573) 814-0083Palmyra, MO
(573) 769-2056Carterville, IL
(618) 985-3399
DePere, WI(920) 532-0165
DeForest, WI(608) 842-4151
Eau Claire, WI(715) 874-5400Franksville, WI
(262) 835-2710Schofield, WI
(715) 355-9898Escanaba, MI
(906) 786-6920
9200 Liberty DriveLiberty, MO 60468
(816) 781-8070(816) 792-9100Springfield, MO(417) 865-0505
Wichita, KS(316) 943-1231
Great Bend, KS(620) 792-1361
Liberal, KS(620) 624-7274
Salina, KS(785) 825-8291
Colby, KS(785) 462-8211
Roland Machinery Co. Central Power Systems & Services
Page 74 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Drivers Ready for Challenging, World-Class Road Coursethe bad sections,” Baise said, “by taking upall the [temporary] sealant and replacing itwith concrete sealant.”In addition to the core samples from
around the track, they videotaped sewer linesto look for damage and drainage obstruc-tions. “The pipe was crushed in some areas,”said Baise. “Tree roots that grew in had to bemachine-cut out.” Chunks of concrete were found under-
ground, 150 ft. from manholes, but due to alimited budget, they are unable to beaddressed for the time being. However, ifthere is a problem in the future, Baise saidthey know what needs to be done and“what’s under there.”Belle Isle is a “flat piece of ground that’s
hard to drain,” as Baise describes it. Thewater table is high on the island, complicat-ing drainage. Infrastructure that is 40 to 50years old hasn’t been able to withstand theweather or the wear and tear. Old catchbasins were not precast; they were poured inplace or created using cement block.Because of those factors, wherever crews
worked on the road, they also rebuilt under-neath: catch basins, new concrete pipes andnew edge drains to get rid of the water. Turn11 is one of the areas that has all new catchbasin and piping.
Paving the Way for a Better RaceNot all of the underground work involved
plumbing. Baise explains that the previouspromoter had to cover the track surfacebetween Turns 3 and 4 between races withdirt and grass. That now has to be removed.“We’re still cleaning, but the concrete buried
beneath it is in good shape,” he said.However, the shoulders will have to be re-graded for drainage.After the storm sewer work, curb work
was next on the chain of events. Crewsworked on elevations and baseline. Next,they did the flat work: forming for roadwayitself. It was complicated in some areasbecause they had to warp the road pitch atthe crown to meet the turns, but still ensurethat drainage goes to the catch basins, notinto an off-camber collection area. The job required 84,000 to 86,000 sq. ft.
(25603.2 to 26212.8 m) of concrete 9 in.thick with steel reinforcement for the roadand curb. Baise estimates that 40 to 50 guyswere on site for big pours. “We poured cen-ter-to-curb on both sides and tied in the mid-
dle with steel pins.”In addition to the 6-inch box curbs bor-
dering the track, red and white “racingcurbs” were poured with no breaks. Thesecurbs, roughly 24-30 in. wide, extend twofeet into the roadway to create chicanes thedrivers have to maneuver.The roadway still has seams. “They’re
necessary expansion joints for movementbecause of the freeze-thaw cycles,” Baisesaid. Approximately 3,000 sq. ft. (914.4 m)of asphalt is being installed in limited areas,such as the new straightway, which hasraised manholes. Fifty feet of the old Turn 3and 75-100 ft (22.9-30.5 m) of the new Turn3 are also getting asphalt in areas where theold asphalt came unraveled, according toBaise.
Although the asphalt mix used was “a lit-tle different” than the typical mix, “regular”concrete was used on the project. “We had tostay with products in city code,” Baise said.The Grand Prix may have funded the proj-ect, but the city had approval, so crews hadto build to city specifications.
Racing the ClockWork on the Belle Isle track began on
Sept. 11 and is expected to be completedsoon if rain doesn’t interfere with the sched-ule. Sidewalks, landscaping and seeding stillneed to be done. The six-week schedule isespecially impressive, considering therewere about six days when crews couldn’twork because they were waiting on testresults to determine if the concrete was
strong enough to drive on, said Baise.The compressed schedule – an attempt to
beat the weather – put pressure on the team,as did the need to maintain access during theproject. “We only closed certain sections,”Baise said. “One section was closed twoweeks, another five weeks – but peoplecould go around the island because we leftthe Strand open. It didn’t affect use of thepark.”The real test will come next June 1-2,
when the IZOD IndyCar series returns forthe “Dual in Detroit” – two 70-lap races, oneof which will introduce standing starts.“We’re so excited to host the first IndyCardoubleheader of the season,” Denker said,adding that his goal is to make the race a per-manent fixture on the schedule. “Our visionis to have this race here for a long time.”While the tight schedule may have added
extra pressure, knowing that the 2013IndyCar event is the series’ first double-header doesn’t. “We want it to be rightbecause it needs to be,” said Baise. CEG
Work on the Belle Isle track began on Sept. 11 and is expected to be completed soon if rain doesn’t interfere with the schedule.
Local contractors M&B Contracting, from Metamora, Ill., andPollard Concrete Services, both of whom have done work on theisland before, partnered on this project.
The job required 84,000 to 86,000 sq. ft. (25603.2 to26212.8 m) of concrete 9 in. thick with steel reinforce-ment for the road and curb.
INDYCAR from page 34
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 75
Howell Tractor2770 May RoadPeru, IL 61354800/342-6072
Fax: 815/224-2538
480 Blaine StreetGary, IN 46406800/852-8816
Fax: 219/977-4220
Illinois Truck & Equipmentwww.iltruck.com320 Briscoe DriveMorris, IL 60450
815/941-1900Fax: 815/941-1486
Mid Country Machinery3478 5th Ave South (Bus. Hwy 20)
Fort Dodge, IA 50501800/206-5936
4734 Sergeant Rd. (Hwy 63)Waterloo, IA 50701
319/234-8710
106 8th StreetSergeant Bluff, IA 51054
712/943-4470
Custom Truck & Equipmentwww.customtruckandequipment.com
7701 E. 24 HighwayKansas City, MO 64125
800/861-1065816/241-4888
Fax: 816/241-8826
2121 Stephens Blvd.Joplin, MO 64804
417/659-8969Fax: 417/659-8871
Page 76 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CUSTOMER APPRECIATION LUNCHES TO BE HELD AT MURPHY TRACTOR / Technology Workshop Dates Include:Friday, November 16th in Kansas City, MOTuesday, November 27th in Springfield, MO – addedTuesday, December 4th in Painesville, OHWednesday, December 5th in Poland, OHWednesday, December 12th in Cranberry Township, PA
(this date moved from December 6th to December 12th)Thursday, December 13th in Cincinnati, OHFriday, December 14th in Canton, OHWednesday, December 19th in Vandalia, OHThursday, December 20th in Lima, OH
Minnesota Nursery & Landscape Association (MNLA) – Successful BusinessGrow Here!2012 EVENTS CALENDAR:November 2th thru November 6th – 2012 IRRIGATION SHOW & EDUCATION CONFERENCENovember 8th thru November 10th – TCI EXPO 2012 in BALTIMORENovember 16th – 9:00 AM CST – 3:30 PM CST –PESTICIDE RECERTIFICATIONJanuary 8, 2013 – 8:00 AM CST – 5:00 PM CST – SUPER TUESDAY: PER-MEABLE PAVER SYSTEMS CERTIFICATE COURSEJanuary 8, 2013 – 8:00 AM CST – 5:00 PM CST – SUPER TUESDAY: LAND-SCAPE IRRIGATION TROUBLESHOOTING (PLT RELICENSURE)January 9th thru 11th, 2013 – NORTHERN GREEN EXPO. This event features a trade show, educational sessions, and networking events.***Please contact MNLA at [email protected] or call toll free: 888-886-6652 for more information.
SA – MIDWEST COUNCIL HOSTS NATIONALLY RENOWNED CONSTRUCTIONSALES TRAINER
(Tickets available for December 5th Public Presentation in Maryland Heights)Tom Woodcock, nationally renowned construction sales trainer and founder ofSeal the Deal, will share his proven construction-specific techniques on how toweave marketing efforts and sales strategies together to get effective sales results.Woodcock’s presentation will be held 1 to 4 PM, Wednesday, December 5 atthe Quality Inn in Maryland Heights, 2434 Old Dorsett Road. Topics will include:. What is a proper marketing program for a contractor or supplier?. What are the roles of marketing and sales?. Tying a sales strategy to a marketing strategy.. Walking out a sales strategy. . Evaluating the success of combined sales and marketing strategy.Woodcock will also discuss solutions to the consistent mistakes people make inconstruction selling such as bidding and pricing errors, an incorrect approach tothe customer, poor presentation techniques, improper selling attitudes and usingout of date selling techniques. Registration is required to attend. The cost is$40 for ASA Members and $60 for non-members. For more information aboutthe presentation, contact ASA – Midwest Council Executive Director SusanWinkelmann at 314/845-0855 or [email protected].
AGC of AMERICA is pleased to offer a wide variety of meetings, events and sem-inars for construction professionals that can help you improve every aspect ofyour business.
AGC of St. LouisINSIDE INSIGHT LUNCHEON - WEDNESDAY, NOVEMBER 14thGREENBRIAR HILLS COUNTRY CLUB, ST. LOUISRegistration: 11:15 AMLunch: 11:45 AM Speaker: 12:15 PMAdjourn: 1:15 PMInside Insight is an AGC of St. Louis quarterly speaker series designed to giveyou just that – the INSIDE INSIGHT on public policy issues. Cost: $35 for AGC of St. Louis Members, $70 for Non-MembersPlease register by Friday, November 9th. Reservations cancelled after thisdate will be billed. Register online at http://events.agcstl.org/imispulbic/Questions??? Call the AGC of St. Louis at 314/781-2356www.agcstl.org
AGC of MINNESOTAAnnual Business Meeting Notice: Notice is given to the voting members ofASSOCIATED GENERAL CONTRACTORS OF MINNESOTA, a Minnesota coopera-tive organization (the “Association”), that the November 2012 annual meeting ofvoting members will be held at the Marriott Minneapolis Southwest, 5801 OpusParkway, Minnetonka, Minnesota 55343, at 12:00 noon, on Thursday,November 29, 2012.
AGC of America Annual Convention: Registration is now open for the 2013 AGCAnnual Convention and Constructor Expo, being held March 6 – 9 in PalmSprings. The early bird discount, a $200 savings, is available until January 16.Room availability at the convention headquarter hotel (JW Marriott DesertSprings) is limited, so reservations should be made as early as possible.Complete conference details are available at http://convention.agc.org or youmay contact Denise Woods, CMP, Director, Communications & Events, AGC ofMinnesota, directly at 651/796-2186; toll free at 800/552-7670 or website:www.agcmn.org. Build America Awards Application: The 2013 AGC/Alliant Build America com-petition is open to general contractors and specialty contractors who are currentmembers of an AGC chapter working as prime contractors for projects complet-ed between November 1, 2011 and November 1, 2012. Member companiescan visit http://awards.agc.org/ to begin a project entry. The final deadline for allsubmissions is Friday, November 2, at 5:00 Pm EST. Winners will beannounced at AGC’s 94th Annual Convention in Palm Springs, March 6th thru 9th.
2013 MAASTO CONFERENCE: The Wisconsin Department of Transportation willhost the Mid-America Association of State Transportation Officials (MAASTO)2013 Conference – “Sharing Strategies for Success.” The conference will be heldJULY 16-19 at the HILTON HOTEL in downtown Milwaukee. One of the majorevents at MAASTO 2013 will be a trade show, where industry representatives willhave the opportunity to showcase materials, technology, and professional serv-ices. The trade show will be held July 17 and 18 at the conference hotel. Moreinformation on the trade show registration, layout, schedule, and fees will beavailable in early 2013 at the conference website, which will be linked via theMAASTO meetings webpage – http://www.maasto.net/meetings.html. If you arelooking to speak to someone with regard to the above conference you may con-tact Denise Woods, CMP, Director, Communications & Events, AGC of Minnesota,directly at 651/796-2186; toll free at 800/552-7670 or website:www.agcmn.org.
*** For more information on the above AGC of Minnesota events, you maycontact Denise Woods,CMP; Director, Communications & Events, AssociatesGeneral Contractors of Minnesota, 525 Park Street, #110, St. Paul, MN55103 DIRECT: 651/796-2186; CELL: 612/201-5501; FAX: 651/632-8928; TOLL FREE: 800/552-7670 and/or www.agcmn.org.
Georgia Utility Contractors Association, Inc.2012 3rd Quarter Safety Training ScheduleTopics Include: . Competent Person Excavation. Confined Space Entry Program. Damage Prevention/GUFPA Law/PSC. ISEE Blasting Certification. Temporary Utility Workzone Traffic Control. NPDES Level 1A Course and Exam*. NPDES Level 1A Recertification Course*. NPDES Level 1B Course and Exam*. GDOT Approved Flagging Program. GDOT Approved Flagging Instructor Program
*No Checks accepted less than 5 days prior to class date payment reserves theseat for class – we do not save seats. For more information on the above class-es which include dates/locations/costs, please contact Scott Brumbelow,Assistant Executive Director, GUCA, 404/362-9995.
GUCA 804 Main Street, Suite C, Forest Park, GA 30297404/362-9995, 877/SAF-GUCA, Fax: 404/362-9211www.guca.com2012 FLORIDA Contractor Associations Meetings Postings:
New Installations: Wednesday, October 10th and Tuesday, December 4thNASTT’s mission is to advance trenchless technology and to promote its benefitsfor the public and the environment by increasing awareness and knowledgethrough information dissemination; research and development; education andtraining; and partnerships with organizations and agencies interested in trench-less technology and its benefits. NASTT provides a representative voice for all sec-tors of the trenchless technology industry. For more information about NASTT andthe variety of training opportunities provided, please visit www.nastt.org or con-tact Michelle Hill, Communications & Training Manager at 440/638-4676 [email protected].
ROAD INSTITUTE 2012 – 2013 Schedule Announced!!!Road Institute R will soon begin its 48th year as the asphalt paving industry’s pre-mier training school, providing practical instruction for industry professionals. Volvo Construction Equipment has announced the 2012 – 2013 schedule for theRoad Institute. The course curriculum offers two- to five-day sessions that beginin October and continue through May 2013, with classes held at two trainingfacilities in North America – one in Chambersburg, PA and the other in Phoenix,AZ. “The Volvo commitment to training includes offering this program as a serv-ice to the industry and providing others the opportunity to learn best practices ina controlled environment with a focus of instruction and training dedicated toasphalt paving,” said Wade Turlington, Director of Product and Sales Education.“The Road Institute is dedicated to providing quality instruction to industry pro-fessionals, even if they don’t own or operate Volvo equipment.” 2012 – 2013 Road Institute Course SCHEDULE includes topics such as:. Automatic Grade and Slope Systems. Large Asphalt Compactor Mechanics (Step 1). Large Asphalt Compactor Mechanics (Step 2). MT2000 Hydraulic and Electrical Systems (Step 1). MT2000 Hydraulic and Electrical Systems (Step 2). MW500 Hydraulic and Electrical Systems (Step 1). Paver and Compactor Operation and Maintenance. Paver and Compactor Operation and Maintenance, warm-mix asphalt(WMA)
. Paver Hydraulic and Electrical Systems – PF6000 – Series Pavers (Step 1)
. P aver Hydraulic and Electrical Systems – PF6000 – Series Pavers (Step 2)
. Paver Hydraulic and Electrical Systems – Blaw-Knox R Pavers (Step 1)
. Paver Screed Operation and Adjustment
. Paving and Compaction Application Seminar
. Small Asphalt Compactor Mechanics (Steps 1 and 2)
. Soil Compaction Application Seminar
. Soil Compactor Mechanics (Step 1)
. Soil Compactor Mechanics (Step 2)Class size is limited for ideal instructor-to-student ratios and team learning.Tuition is $750 (USD) per student per three to five day course or $500 (USD)per student per two day seminar. For more information on the Road Institute orto register for classes, visit roadinstitute.com or call 866/497-4501 or email:[email protected].
BusinessCalendar
Diamond Equipment Inc.2300 Cassens DriveFenton, MO 63026
(636) 343-9970www.lubyequipment.com
199 Airport Rd.Cape Girardeau, MO 63702
(573) 334-9937
4375 Camp Butler Rd.Springfield, IL 62707
(217) 744-2233
2625 North 24th St.Quincy, IL 62305 (217) 222-5454
8853 Petrov DriveCaseyville, IL 62232
(618) 397-9971
4100 Gardner Ave.Kansas City, MO 64120
(816) 241-9290(816) 241-1738www.vlpco.com
Joplin, MO(800) 878-8223(417) 781-8222
Springfield, MO(800) 955-2729(417) 887-2729
Wichita, KS(800) 878-3346(316) 838-3346
Topeka, KS(800) 878-4345(785) 267-4345
Garden City, KS(800) 511-1435(620) 275-1996
1060 E. Diamond Ave.Evansville, Indiana
47711(812) 425-4428(800) 258-4428
Fax: (812) 421-1036www.diamondequipment.com
2000 Harlan DriveTerre Haute, IN 47802
(812) 299-4747(888) 343-4747
Fax: (812) 299-3687
17035 N. Illinois Hwy.37
Mt. Vernon, IL 62864(618) 242-2273 (800) 388-6396
Fax: (618) 242-9161
1046 Lovers LaneBowling Green, KY
42103 (270) 781-1061(800) 489-1061
Fax: (270) 781-0907
1530 Heil Quaker Blvd.Nashville, TN 37086
(615) 641-1100(800) 635-9454
Fax: (615) 641-1108
CONSTRUCTION�EQUIPMENT�GUIDE�•�www.constructionequipmentguide.com�• November�10,�2012�•�Page�77
Built to performGrove mobile telescopic cranes
range in capacity from 8t to 450t (8.5 USt to 550 USt)
Grove cranes
Contact your dealer or visit www.manitowoc.com/cranesdealer
Built to pere mobile telescopic cranesovGr
ofBuilt to pere mobile telescopic cranes
rmoe mobile telescopic cranes
ough-terrain and tre all-terrain, rvorGformance featurigh perH
ecision and contrength, prstr
ur cranes o�er the vO
5t to 50t (8.5 US5to 4
e long-lasting and haruck cranes arough-terrain and tren the most challenging lifting jobs with ecute eves help exformance featur
ol. ecision and contr
oject, with capacities ranging frersatility to tackle any prur cranes o�er the v
t).0 US5
king. d-wore long-lasting and haren the most challenging lifting jobs with
om 8t oject, with capacities ranging fr
range in capacitye cranesovGr
( from 8t
range in capacitye cranes
t to 450t
Contact y
12920 Gravois RoadSt Louis, MO 63127
314/729-0125
12321 E. Pine StreetTulsa, OK 74116918/438-1700
6715 W. RenoOklahoma City, OK 73127
405/495-7820
Kansas City, KS913/850-6300877/851-5729
Cleveland Crane & Shovel Sales, Inc.26781 Cannon RoadCleveland, OH 44146
440/439-4749800/362-8494
Fax:�440/439-2177
www.craneandshovel.net
930 W 138th StreetRiverdale, IL 60827
708/656-7700Fax: 708/532-127325210 Brest RoadTaylor, MI 48180734/947-9250
Fax: 734/947-9260
920 S State Road 39Lebanon, IN 46052765/482-4145
Fax: 765/482-49282126 Glenview DriveEvansville, IN 47720
812/422-6912Fax: 812/422-6982
Aspen EquipmentCompany
www.aspenequipment.com1525 S.E. Cortina Dr.Ankeny, IA 50021515/965-1000
Fax: 515-965-179011475 S. 153rd St.Omaha, NE 68138402/894-9300
Fax: 402-894-9302
Kirby Smith Machinery Inc. Walter Payton Power Equipment LLC
Page 78 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Caterpillar Unveils First Hybrid Excavator, Cat 336E HCaterpillar Inc. unveiled the first model in its new line of
hybrid excavators, the Cat 336E H, at its Mossville IndustrialDesign Center on Oct. 16 at a special trade press event, “TheNext Generation is Here.” The new 336E H will be sold andserviced exclusively through the global Cat dealer networkfollowing the machine’s official launch at bauma 2013 inMunich, Germany. The order board for the Cat 336E Hopens in Feb. 2013, with factory shipments begin-ning in March 2013.The Cat 336E H uses a new hydraulic hybrid
technology developed by Caterpillar. “A hybrid is independent of any particular tech-
nology — it doesn’t have to be electric,” said KenGray, global product manager of large hydraulicexcavators for Caterpillar’s excavation division.“There are many ways to store and reuse energy,including our patented hydraulic hybrid system fea-tured on the Cat 336E H.“Caterpillar has developed, built, and tested elec-
tric hybrid excavators, but—until now—we had notfound a hybrid approach that would actually lowerour customers’ owning and operating costs,” Graysaid. “Large excavators operate in high-productionapplications in which fuel is a very significant oper-ating cost for our customers. So, the 336E H, thehybrid version of our workhorse 336E, is ideal forintroducing our new hydraulic hybrid technology,with its more than 300 filed patents.“We can’t wait to see the reaction of our cus-
tomers to the 336E H,” said Gray. “We’re confident they willbe delighted. No other commercially available technologyhas higher power density than hydraulics, and that’s why weselected a hydraulic solution to help our customers achievesubstantial fuel savings. The 336E H also meets stringentTier IV Interim/Stage IIIB emission standards. It is extraor-dinarily quiet, too. So it’s a socially responsible machine forour customers to own, and they will sacrifice nothing interms of performance, power, force, speed or production.Once more, the owning and operating costs for the 336E Hare actually lower than the standard machine. That’s thevalue customers expect from Cat excavators.”“The 336E H is a game-changer — the most revolution-
ary excavator to come to market in decades,” said GaryStampanato, vice president of Caterpillar’s excavation divi-sion. “Customers aren’t going to choose the 336E H simplybecause it is sustainable. They will select it because it actu-ally lowers their owning and operating costs, and maintainsthe performance of our industry leader, the 336E. Caterpillarhas the most productive and fuel-efficient excavator productline in the industry, and our customers are supported by thebest dealers in the world. The 336E H extends our leader-ship, is the right thing to do for our customers and is a signof great things to come.”
Technology“Caterpillar’s corporate technology strategy centers on
research and development in advancing technology to meetcustomers’ needs today, which is what the 336E H does,”said Tana Utley, Caterpillar’s chief technology officer andvice president of the product development and global tech-nology division. “We’re also continuously working on inno-vations that we anticipate will meet their future needs. That’swhy we’re continuing our research and development in elec-tric hybrid technology too, which actually began our hybriddevelopment path several years ago.”
“Caterpillar has an extraordinary team of people workingon hybrid technology solutions for the next generation of Cathydraulic excavators,” added Gray. “They are from everycorner of the world, are among the very best and brightestminds, and they are listening very closely to our customers.It’s exciting for me to see their enthusiasm for this projectand the quality product they have developed in the 336E H,
and we’re just getting started.”“I am absolutely confident our engineers will continue to
discover and develop the best hybrid approaches forCaterpillar’s extensive line of equipment and applications,whether that’s some form of hydraulic or electric hybrid sys-tem or something as of yet unknown,” Utley added. “AtCaterpillar, we don’t simply engage in creating new tech-nologies like the hydraulic hybrid system just for technolo-gy’s sake, or simply to prove that we can. Our technologystrategy’s focus never loses sight of what our research anddevelopment efforts can mean to our customers’ success —today and in the future.” Since the introduction of the 300 Series in 1994, the fam-
ily of excavators has become an industry standard in a largevariety of general, quarry and heavy construction applica-tions. Caterpillar introduced the standard 336E in 2010 as adirect replacement for the 336D. The 336E was introducedprimarily to meet Tier IV Interim/Stage IIIB emissions stan-
dards, and like any new Cat machine, the 336E includes sev-eral enhancements over its predecessor, including morehorsepower with greater fuel efficiency, more lift capability,higher digging force and automatic aftertreatment regenera-tion, according to the manufacturer.The 336E H has all of the same powerful advantages of
the 336E with the biggest difference between the two mod-els being even greater fuel efficiency. To achieveadded fuel savings, the design of the 336E H usesthree building block technologies that: • Conserve fuel with engine power management
via the Cat electronic standardized programmable(ESP) pump, which smoothly transitions betweenthe hydraulic hybrid power sources, engine andaccumulator. • Optimize performance using restriction manage-
ment via the Cat adaptive control system (ACS)valve, which intelligently manages restrictions andflows to seamlessly control machine motion with noloss of power, and to ensure operators experience nodifference in control, hydraulic power or lift capabil-ity. • Reuse energy via the hydraulic hybrid swing sys-
tem, which captures the excavator’s upper structureswing brake energy in accumulators, and then releas-es the energy during swing acceleration.
Fuel SavingsThe 336E H delivers up to 50 percent greater fuel
efficiency, which is measured in tons per liter, over the 336D.Customers can expect the 336E H to use up to 25 percentless fuel compared to a standard 336E, and up to 33 percentless fuel than the 330/336D. All three of the technologybuilding blocks, conserve, optimize and reuse, are integratedtogether to maximize fuel savings in a variety of applica-tions. Even in low-intensity swing applications, customerswill still experience significant fuel savings because of theconserve and optimize technologies, according to the manu-facturer.
Return on Hybrid InvestmentBecause the 336E H burns less fuel and reduces regulated
engine emissions, owning and operating costs will be dra-matically lower compared to the standard machine, and itscarbon footprint will be smaller, as well. Precisely when cus-tomers will recoup their initial investment in a 336E Hdepends on fuel prices and their applications. Assumingtoday’s fuel prices and a high-production application for a336E H, Caterpillar estimates customers can realisticallyexpect to see a return on their investment for the hybrid exca-vator model in as little as one year.
Durable and ReliableCaterpillar designed the 336E H to deliver the same dura-
bility and reliability customers expect of all Cat machines,including large excavators like the standard 336E. Thedesign of the 336E H uses Cat hydraulic components with along track record of durability and reliability for maximumuptime and productivity. Also like a standard machine, 336EH components can be replaced or rebuilt to maximize thehybrid’s service life.
ValidationCustomers have been using field follow machines, which
The 336E H is the hybrid version of the 336E.
The Cat 336E H uses a new hydraulic hybrid technolo-gy developed by Caterpillar.
see CAT page 98
New Design Unveiled for Capitol Christmas Tree HaulMack Trucks unveiled the custom-deco-
rated MACK Pinnacle model, which will bedriven by former U.S. Sen. Ben NighthorseCampbell as he hauls the 2012 CapitolChristmas Tree from Colorado toWashington, D.C. The theme of the design is “From One
National Treasure to Another,” pointing toMack’s 112-year legacy. The truck featuresMack the Bulldog hauling a massive treethrough the snow, with large mountains inthe background. “The Capitol Christmas Tree is a great tra-
dition in the United States, and Mack isproud to once again participate in the proj-ect,” said John Walsh, Mack vice presidentof marketing. “The design for this year’sPinnacle model captures Mack’s legendarydurability and reliability in a unique and funway. ” Campbell, who represented Colorado
from 1993-2005, also helped transport theCapitol Christmas Tree in 2000.
“It is a privilege to drive the tree for theU.S. Capitol from Colorado this year,” saidCampbell. “It’s just as exciting, though, toget behind the wheel of a Mack truck again.I know I can count on a great ride and auniquely American holiday experience.”Choose Outdoors, a national nonprofit
coalition for outdoor recreation, is coordinat-ing the 2012 Capitol Christmas Tree tourwith the White River National Forest. The Capitol Christmas Tree tour officially
began Nov. 3 in Meeker, Colo., where thetree will be harvested from the 2.3 million-acre White River National Forest, located inthe heart of the Rocky Mountains.Following a celebration in Meeker, the treewill be wrapped and embark on its route tothe nation’s capital, stopping at numerouscities and towns throughout Colorado,Oklahoma, Texas, Missouri, North Carolina,Pennsylvania and Virginia. The SmartWay-certified Pinnacle Axle
Back model sleeper is equipped with a trail-er, donated by Hale Trailer Brake and Wheelof Allentown, Pa. The trailer will be fittedwith a custom-built cradle to support thetree’s branches. The tree will find its holidayhome on the Capitol lawn shortly afterThanksgiving, when it will be decoratedwith ornaments made by Colorado youthand lit with 10,000 low-energy LED lights in
a ceremony led by Speaker of the HouseJohn Boehner (R-OH). Mack most recently provided a truck for
the Capitol Christmas Tree Project in 2011,when the tree traveled cross country fromStanislaus National Forest in California’sSierra Nevada Mountains. Since 1964, U.S.national forests rotate the responsibility ofproviding a tree for the Capitol.
SECT IONTrucks & Trailers
New Design Unveiled for Capitol Christmas Tree HaulMack Trucks unveiled the custom-deco-
rated MACK Pinnacle model, which will bedriven by former U.S. Sen. Ben NighthorseCampbell as he hauls the 2012 CapitolChristmas Tree from Colorado toWashington, D.C. The theme of the design is “From One
National Treasure to Another,” pointing toMack’s 112-year legacy. The truck featuresMack the Bulldog hauling a massive treethrough the snow, with large mountains inthe background. “The Capitol Christmas Tree is a great tra-
dition in the United States, and Mack isproud to once again participate in the proj-ect,” said John Walsh, Mack vice presidentof marketing. “The design for this year’sPinnacle model captures Mack’s legendarydurability and reliability in a unique and funway. ” Campbell, who represented Colorado
from 1993-2005, also helped transport theCapitol Christmas Tree in 2000.
“It is a privilege to drive the tree for theU.S. Capitol from Colorado this year,” saidCampbell. “It’s just as exciting, though, toget behind the wheel of a Mack truck again.I know I can count on a great ride and auniquely American holiday experience.”Choose Outdoors, a national nonprofit
coalition for outdoor recreation, is coordinat-ing the 2012 Capitol Christmas Tree tourwith the White River National Forest. The Capitol Christmas Tree tour officially
began Nov. 3 in Meeker, Colo., where thetree will be harvested from the 2.3 million-acre White River National Forest, located inthe heart of the Rocky Mountains.Following a celebration in Meeker, the treewill be wrapped and embark on its route tothe nation’s capital, stopping at numerouscities and towns throughout Colorado,Oklahoma, Texas, Missouri, North Carolina,Pennsylvania and Virginia. The SmartWay-certified Pinnacle Axle
Back model sleeper is equipped with a trail-er, donated by Hale Trailer Brake and Wheelof Allentown, Pa. The trailer will be fittedwith a custom-built cradle to support thetree’s branches. The tree will find its holidayhome on the Capitol lawn shortly afterThanksgiving, when it will be decoratedwith ornaments made by Colorado youthand lit with 10,000 low-energy LED lights in
a ceremony led by Speaker of the HouseJohn Boehner (R-OH). Mack most recently provided a truck for
the Capitol Christmas Tree Project in 2011,when the tree traveled cross country fromStanislaus National Forest in California’sSierra Nevada Mountains. Since 1964, U.S.national forests rotate the responsibility ofproviding a tree for the Capitol.
Pages 79-87
The design on the custom-decorated MACK Pinnacle model features the MackBulldog pulling a Christmas tree across a snow-covered landscape. The truck willhaul the 2012 Capitol Christmas Tree from the White River National Forest inColorado to Washington, D.C.
Former U.S. Sen. Ben Nighthorse Campbell (C) with John Walsh, Mack vice presidentof marketing, and Santa Claus (Wayne Stehle of Mack Defense) in front of the cus-tom-decorated MACK Pinnacle model that will haul the 2012 Capitol Christmas Tree.
Page 80 • November 10, 2012 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
AD60 Adds Value-Adding Features,Capacity, Enhanced Cooling Efficiency
The new AD60, with a rated payload capacity of 66 tons(60 t), is now the largest model in the Cat range of under-ground articulated trucks, providing a 9 percent capacityincrease over the AD55B. The new truck incorporatesadvanced heat-shielding and cooling technology, significantrefinement of its Cat C27 ACERT engine, enhanced ridecharacteristics, and now-standard monitoring systems,including the Cat VIMS guardian and truck payload man-agement systems. Premium standard features include achoice of integrated body styles, electronic retarding, cli-mate-controlled cab and ground level servicing.
Engine and CoolingThe Cat C27 engine, rated at 776 to 805 gross hp (579 to
600 kW), has been significantly refined for the AD60,including new pistons and high temperature fuel injectors,more durable rocker arm assemblies, a redesigned crankshaftlubrication system, a high efficiency engine oil cooler and ahigher capacity fuel cooler. The sum of these refinements isadded durability, reliability and cooling efficiency for theC27.
New for the AD60 is a remote-mount-ed transmission oil cooler that ensuresoptimum operating temperature for theseven-speed Cat planetary powershifttransmission, which features a lock-uptorque converter for efficient, fuel-savingoperation, as well as an electronically con-trolled retarding system for optimum safe-ty and productivity. The new coolerlessens the heat load on the engine oilcooler, allowing the engine cooler to func-tion more efficiently.
The new heat-shielding system isolatesheat from the exhaust manifolds, tur-bocharger impeller, and exhaust piping toreduce engine compartment temperaturesand to provide a cooler environment forsurrounding components. In addition tobeing more effective, the heat shield alsois easier to install and remove. New venti-
lated hoods and covers allow effective heat dissipation andassist in passive cooling of component compartments.
Operator Environment and SuspensionThe spacious, comfortable, well protected operator station
is now equipped with a standard air-ride seat, the CatComfort TLV2, which features electric adjustment of firm-ness and a design that minimizes vertical and lateral motionimparted to the operator. Updates to the front suspension sys-tem contribute to ride stability and operator comfort.
Value-Adding Features Premium features in the AD60 design include electronic
integration of the engine and drive train, providing con-trolled-throttle shifting, overspeed protection, and body-upshift inhibitor. The now standard truck payload managementsystem calculates payload data, and the VIMS guardian sys-tem provides operators, service technicians and managerswith machine health information to ensure high mechanicalavailability.
The choice of a dump or ejector body allows tailoring the
AD60 to different applications, andthe single-stage hoist cylinderspeeds cycle times. The framedesign features box-section con-struction with materials and weld-ing techniques that optimize struc-tural life, and the articulation/oscil-lation hitch promotes stability andmaneuverability in all types ofground conditions.
Four-wheel, oil-cooled, multipledisc brakes provide reliable, non-fade stopping power, adding to theAD60 safety features, whichinclude an integral ROPS/FOPScab, ground-level shut-downswitch, operator presence system,anti-skid deck surfaces, and push-out safety glass.
Cat AD60 underground truck.
A Cat R3000H underground loader loads a Cat AD60 underground truck.
AIS Construction Equipment Corporation3600 North Grand River Avenue
Lansing, MI 48906517-321-8000
Fax: 517-321-6275
600 44th Street S.W.Grand Rapids, MI 49548
616-538-2400Fax: 616-538-0449
65809 Gratiot AvenueLenox, MI 48050
586-727-7502Fax: 586-727-7311
4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
8300 M-72 EastWilliamsburg, MI 49690
231-267-5060Fax: 231-267-5257
56555 Pontiac TrailNew Hudson, MI 48165
248-437-8121800-457-8121
www.aisequip.com
2216 N. Greenbay Rd.Waukegan, IL 60087
847-336-1205
10351 W. Laraway Rd.Frankfort, IL 60423
815-464-6650
27939 W. Concrete Dr.Ingleside IL 60041
815-363-4100www.burrisequipment.com
949 3rd Ave.Windom, MN 56101
507-678-2752
Ditch Witch of North Dakota1100 W. Main Ave.
West Fargo, ND 58078701-282-3600877-282-3600
Fax: 701-282-3636
2921 Twin City Dr.Mandan, ND 58554
701-663-9551877-663-9551
Fax: 701-663-0692
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • November 10, 2012 • Page 81
Kentucky13090 Aiken Rd.
Louisville, KY 40223800-507-9705
4233 Russellville Rd.Bowling Green, KY 42101
866-528-9699
140 James Lewis Rd.London, KY 40744
877-231-7151
3279 Lexington Rd.Richmond, KY 40475
800-463-8722 www.holtequipment.net
6140 Highway 10 NWAnoka, MN 55303
763-323-1720 888-448-5266
Fax: 763-422-3949
3021 West 133rd Shakopee, MN 55379
952-445-6310 Fax: 952-496-0263
23580 Highway 55 Loretto, MN 55357
763-479-8200 Fax: 763-479-8201
1015 Highway 212 WestNorwood Young America, MN
952-467-2182Fax: 952-467-3259
901 Parker Ave. W.Dassel, MN 55325
877-570-2740www.farmriteequip.com
Scharber & Sons,Inc.
13725 Main Street Rogers, MN 55374
763-428-4107 Fax: 763-428-2700 www.scharbers.com
1929 E. Madison Ave.Mankato, MN 56001
507-387-7376Fax: 507-387-7399
1400 W. Ogden Ave.Naperville, IL630-355-7150
310 W. 162 St. Rt. 6South Holland, IL
708-331-6362
3110 Prairie Rd.Rockford, IL
815-961-3160
1560 North Old Rand Rd. Wauconda, IL847-526-7700
600 Walnut CtRockdale, IL
815-730-9011
2170 South Yost Ave.Bloomington, IN 47403
812-333-9677Fax: 812-333-9731
5400 Industrial Rd.Fort Wayne, IN 46825
260-482-8576Fax: 260-483-4057
7355 East 30th St.Indianapolis, IN 46219
317-544-3411
Lafayette, IN 47905765-477-6933
Fax: 765-448-9038
South Bend, IN 46619574-232-1461
Fax: 574-233-3324
www.westsidetractorsales.com
Page 82 • November 10, 2012 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
GIVE. ADVOCATE. VOLUNTEER. LIVE UNITED™
Want to make a difference? Find out how at LIVEUNITED.ORG.
(877) 343-5319
Locations in IOWA and MICHIGAN
www.ZipsTransportEquipment.com
5-Year StructualWarranty on allTrailMax Trailers
Custer Products has introduced several new high powered work lights to our LITE*IT. The new lights rangefrom an 8Watt PAR36 replacement light to a 9000 lumen 120Watt LED light. “We now have a LED work lightto fit almost any need, helping to make the work environment safer and more productive” says Brad Custer,President. “We’ve had a tremendous response in a short period of time on our new LED work lights”.
Custer Products Ltd has been supplying quality products to the towing, agricultural, trucking, trailer andsafety industries since 1993. We currently sell to a network of customers throughout the US, Canada,Mexico, South America and Europe. Custer Products strives to provide first class customer service, quickorder fulfillment and innovative solutions to our customers’ needs.
Call us and ask about what’s new at 800-490-3158 or email us at [email protected]
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • November 10, 2012 • Page 83
JEFF BELZER’SLAKEVILLE, MN
CHEVROLET
A POWERFULWORKFORCE
CALL FOR
SPECIAL PRICING
FOR MNLA-AGC-NAHB
MEMBERS ON
SELECT VEHICLES
Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications. As a Chevy Business Central dealer, we’re all business.
COMMERCIAL HEADQUARTERSJeff Belzer Chevrolet, 50 & Cedar, BX 965 Lakeville, MN
Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change
©2009 General Motors
George Miller [email protected]
Ron Kelly [email protected]
2012 2500 expres vans, from $24,999. 2012 k3500 4x2 chassis 84 c/a, gas,posi, sno prep, from $26,999.
hard to find 2012 "red" k2500 crew cab4x4 long box, gas, lt, from $37,499.
2013 1500 ext cab 4x2 "LT" 4.8 v8, posi,trailer pkg, $24,599.
2012 ext cab 4x2, 9,500 gvw, 8 ft asoriafiberglass service body, (no rust). promounit, call for pricing
2012 k3500 crew long box, wt, 6.0 gas,has to go $33,299, plus ttl
2012 k2500, ready for plow, call for pricing.
2013 c1500 wt 4x2 ac, cruise, from$18,299.
SOLDSOLD 2 Crew Gas 4x4’s Inbound -
Call for Info
Page 84 • November 10, 2012 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
Mack Takes Integration Leadership to New LevelIn line with its commitment to maximiz-
ing customer value, Mack Trucks Inc. intro-duced two new offerings that build upon thecompany’s longstanding leadership in inte-grated products: the MACK SuperEconodyne powertrain and MACK PedigreeUptime Protection service and support pack-age.Integrated powertrains have been at the
heart of Mack since its inception in 1900.Today, every truck with a MACK PedigreePowertrain — proprietary engine, transmis-sion and axles — features a gold Bulldog onthe hood. The new MACK SuperEconodyne capitalizes upon the company’sPedigree Powertrain expertise to providecustomers with a 3.5 percent improvementin fuel economy, according to the manufac-turer. The new Mack Pedigree Uptime
Protection is an integrated package of after-market solutions ensuring customer satisfac-tion throughout the service, parts purchasingand asset protection experience. “Mack recognized more than 112 years
ago that components designed to worktogether provide superior performance,” said
John Walsh, Mack vice president, market-ing. “The new Super Econodyne powertrain
package we’re rolling out here at MATS is aperfect example of what we can accomplishwith a Mack Pedigree Powertrain. WithPedigree Uptime Protection, we’re extend-ing the concept of integration beyond theproduct — integrating the entire truck own-ership experience to deliver a total businesssolution that keeps our customers out in frontof their competition.”
Super Econodyne Increases Fuel Efficiency, Maximizes Performance
The Super Econodyne powertrain systemis designed with all-Mack proprietary com-ponents for a complete MACK PedigreePowertrain. The MACK MP8-445SEengine, MACK mDRIVE automated manu-al transmission, MACK C125 proprietarydrive axles and Mack’s custom software allcombine to offer a system designed for fuelefficiency without compromising power orperformance. The result is up to 3.5 percentbetter fuel efficiency compared to other sim-
ilarly spec’d vehicles, according to the man-ufacturer. Ideal for dry van, refrigerated, liquid and
dry bulk haul, and flatbed operations, SuperEconodyne is available on all MACKPinnacle models, a Class 8 commercial vehi-cle already known as a fuel-efficiency leaderamong on-highway trucks. With the additionof Super Econodyne, rated up to 88,000 lbs.GCWR, the aerodynamic Pinnacle offerseven greater operating benefits while main-taining driver satisfaction. Contributing to the fuel-efficiency
improvement is the Super Econodyne’s“down speed” feature. Super Econodyne isengineered to “down speed” more than 200rpm at a highway speed of 65 mph, cruisingat 1,160 rpm versus 1,380 rpm. This reducesfuel consumption by up to 2 percent com-pared with previous engine models, with acorresponding reduction in CO2 emissions.The Mack proprietary C125 drive axlesdeliver an additional 1.5 percent fuel econo-my improvement.“Super Econodyne builds upon our
roots,” said David McKenna, Mack directorof powertrain sales. “Mack pioneered thelow-speed Econodyne engines in the 1960s.Historically, we’ve insisted on gearing fast,running slow. Now, we’ve designed a com-pletely integrated system to run efficiently at450 rpm above idle speed when before itwas 700 to 800 rpm above idle speed.”The Mack MP8-445SE offers 445 hp
(332 kW) and up to 1,760 lb.-ft. of torque.The C125 axles have a 2.66:1 ratio. All pow-ertrain components communicate with eachother via Mack software.“It’s the ultimate in complete powertrain
integration,” McKenna said. “The engineseamlessly communicates with the transmis-sion, which seamlessly communicates withthe vehicle, resulting in instantaneous deci-sions. Add the Mack C125 drive axle, andwe’re talking about fuel-efficiency benefitsnever before realized in a powertrain sys-tem.” Key to the fuel efficiency delivered with
the Super Econodyne powertrain package isthe Mack mDRIVE transmission. The 12-speed automated manual has no clutchpedal, and the gearshift is operated by anintelligent shift pad module and managed bysophisticated electronics. mDRIVE continu-ously monitors changes in grade (both upand down), vehicle speed, throttle position,acceleration, torque demand and combinedvehicle weight. The mDRIVE transmissionfeatures Mack’s, two-speed reverse func-tionality that better controls road speed and
engine speed.
Pedigree Uptime Protection Enhances Ease of Use, Communication
Pedigree Uptime Protection is an integrat-ed package of aftermarket solutions withthree components: Bulldog ServiceManagement, Bulldog Parts Purchasing andBulldog Asset Protection. Bulldog ServiceManagement is powered by MVASIST andincludes MACK OneCall. MVASISTallows customers to improve communica-tions, manage costs, reduce downtime andincrease operating efficiency. Through anonline portal, customers are able to commu-nicate with the dealer, initiate repairs, accessa complete service history, approve andmonitor repair status and manage repairexpenses. Recently, the company announced that
MVASIST comes free-of-charge on any newMack truck delivered after Jan. 1, 2012.MACK OneCall is a full-service supportcenter that manages breakdown assistance,towing services, technical support and real-time online case tracking. Bulldog Parts Purchasing enables 24/7
parts purchasing online and offers onlineaccess to purchase and invoice history.Bulldog Asset Protection includes purchasedcoverage and provides preventive mainte-nance programs performed at any Mackdealer in the U.S. as well as inspectionsbased on CSA guidelines.“We listened to what our customers said
they needed from an aftermarket perspec-tive, and we developed an integrated all-encompassing solution tailored to theirneeds,” said Dave Albert, Mack director ofaftermarket solutions. “Customers said they wanted a solution
that would improve communication withdealers and service technicians. They saidthey wanted to get back on the road fasterand to have the ability to order parts around-the-clock. Pedigree Uptime Protection offersall of those benefits and more.”“The combination of our Super
Econodyne Pedigree Powertrain andPedigree Uptime Protection package estab-lishes a new industry standard in total busi-ness solutions,” Walsh said. “It really comesdown to having the customer’s back —delivering on the Mack promise of durabili-ty, reliability and application excellencethroughout the truck ownership experience.” For more information, visit www.mack-
trucks.com.
East Introduces LowestAluminum Drop Deck Trailer
Designed for increased payload versatilityand better stability, East Manufacturingintroduced an all-aluminum drop deck trail-er with a low-slung 36 in. (91 cm) deckheight. “Specialty loads, particularly equipment
loads, keep getting taller and taller,” notedBill McKenzie, director of dealer develop-ment and flatbed products at East. “With thenew low-height East drop deck there is lessneed for partial dismantling of the load to getit below the 13 feet 6 inch maximum legalheight. So haulers have a lot more flexibility in
terms of the loads they can haul both effi-
ciently and profitably.”An added advantage of the 36 in. drop
deck height is its lower center of gravity.This provides the trailer with improved sta-bility, which increases in value the moreunusual the size and shape of the load,according to the manufacturer.Because the new East low-slung drop
deck is all-aluminum, it provides an idealbalance of strength and weight to allow evengreater payload optimization. It is availablein multi-axle configurations, in lengths up to53 ft. (16 m). For more information, call 888/405-3278
or visit www.eastmfg.com.
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • November 10, 2012 • Page 85
#1Chrysler Corp. Commercial
Dealer in Minnesota
18 Cabs & Chassis in Stock
Now!
FURY MOTORS South St. Paul, MinnesotaTruck Master Dick Reineck
651.251.8214 direct • [email protected]
We Deliver!
2012 Ram 4500 STDCab 4x4, PTO Flatbed, Class 4 & 5thWheel hitches, Tool boxes, 220 amp
Alt., HD Snow Plow Pkg.Stk# N1470
MSRP $52,813
$avings $ale $43,799
2011 Ram 3500Cab & Chassis, Crew Cab, H/O
Cummins, Auto Trans, 4x4 PW, PL,T/Cruise, P Seats & More,
Stk# LO742
MSRP $63,952
$avings $ale $50,999
2011 Ram 3500Cab & Chassis, 4x4, Crew Cab, HoDiesel, Automatic, PTO, PW, PL, T/C,A/C, Remote Start, P, Seat & More.Knapheide Flat Bed w/5th Wheel &
Class V Hitch & Tool Boxes, Stk# L0002
MSRP $54,765
$avings $ale $42,999
2011 Ram 3500Cab & Chassis, H/O Cummins, Auto Trans., PTO, 4x4, A/C,
84” C/A HD Towing, Stk# L0377
MSRP $42,085
$avings $ale $33,499
2012 Ram 3500 STDCab & Chassis 4x4, Hemi, Auto
Trans, DT PL T/C, A/C, HD Package,Reading Service Body Class 5 Hitch,
Stk# NO060
MSRP $43,011
$avings $ale $34,499
2012 Ram 3500Std Cab & Chassis, 9’ KnapheideDump Side Tool Boxes, Rear Hitch,PTO/PW PL T/C A/C, Stk# N2442
MSRP $52,540
$avings $ale $43,799
2012 Ram Cargo C/V V/6, Auto Trans., PW, PL, T/CruiseCargo Floor, 25 MPG, Stk# N1892
MSRP $23,995
$avings $ale $19,999
NEW NEW NEW
NEWNEW
NEWNEW
30 Ram 2500-3500 Pickups “No Urea”2 STD Cab, 2500 4x48 Crew Cab, 2500 4x43 Mega Cab, 2500 4x4
14 Crew Cab, 3500 4x41 Mega Cab, 3500 4x4
18 2012 Cab & Chassis In Stock3 Std Cab, 3500 4x4
2 Crew Cab, 3500 4x43 Std Cab, 4500 4x4
2 Crew Cab, 4500 4x4
5 Std Cab, 5500 4x41 Crew Cab, 5500 4x41 Std Cab, 5500 4x2
JEFF BELZER’SDodge Ram Tough
Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.
COMMERCIAL HEADQUARTERSJeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN
Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change
George Miller [email protected]
Ron Kelly [email protected]
John Zadurski [email protected]
2011 3500 4x4, Sno Prep,60” c/a or 84” c/a, Your Choice $35,800
2012 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group, From $40,399
2012 Ram 5500 4x2 Crew,84 c/a, well equipped, From $40,499
Page 86 • November 10, 2012 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
Parts & Equipment Sales
Truck & Trailer Sales
+
Since 1939
5 Locations to serve you in Spencer, Des Moines & Council Bluffs, IA & Sioux Falls, SD
www.vanderhaags.com’
866-634-5030Vander Haags,Inc.
Service & Equipment Installation
=
We carry all the names you trust!
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • November 10, 2012 • Page 87
Vermeer Sales & Service
1675 126th St. WestBurnsville, MN 55337
952-890-6144Fax: 952-882-2980
www.vermeerofminnesota.com
Midwest Trailers Plus, Inc.548 29th St. West
Des Moines, IA 50265515-223-8463
Toll Free: 888-560-2787Fax: 515-223-6446
www.midwesttrailersplus.com
Farm-Rite Equipment Inc.
901 Parker Ave WestPO Box 26
Dassel, MN 55325320-275-2737
Toll Free: 888-679-4857www.farmriteequip.com
K.C. Bobcat2209 W. 40 Highway
Blue Springs, MO 64015800-697-4228816-229-7631
Olathe, KS800-598-4228Platte City, MO800-984-3001
McCann Industries, Inc.
Addison543 South Rohlwing Road
Addison, IL 60101630-627-0000 • Fax: 630-627-8711
Bolingbrook250 East Frontage RoadBolingbrook, IL 60440
630-739-7770 • Fax: 630-739-7699Chicago
2350 South Laflin StreetChicago, IL 60608
312-942-9200 • Fax: 312-421-3502Crestwood
4701 West 137th StreetCrestwood, IL 60445
708-597-3110 • Fax: 708-597-9945
McHenry4102 W. Crystal Lake Road
McHenry, IL 60050815-385-0420 • Fax: 815-385-2975
Schererville1133 Indianapolis Boulevard
Schererville, IN 46375219-865-6545 • Fax: 219-865-0269
Wauconda1360 North Rand Road
Wauconda, IL 60084847-526-9444 • Fax: 847-526-9448
www.McCannOnline.com
Titan MachineryShakopee Division
6340 Hwy 101Shakopee, MN 55379
952-445-5400 • 800-795-9274Fax: 952-445-0365Duluth Division4311 Haines Rd.
Hermantown, MN 55811218-727-3038 • 800-795-0117
Fax: 218-727-2827Rogers Division
14375 James Rd.Rogers, MN 55374
763-428-5099 • Fax: 763-428-5051Industrial Division
N1626 Wuensch Rd.LaCrosse, WI 54601
608-788-1025 • 800-780-1025Fax: 608-788-1027
Page 88 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95, Color Ad $145
2009 Grove RT 880E, 80 Ton Rough Terrain, Tier3 Cummins, 41’-128’ Main Boom, 33’-56’ Jib,Auxiliary Winch, Block, Ball, 18000 Lb HydraulicRemovable Counterweight, A/C and Tilt Cab, FOBGary, IN..............................................................Call
Call Andy at 216-316-1511 23-24 EB
New 2012 Grove RT765E-2, 65 TonRough Terrain, Tier4Cummins, 36’-110’Main Boom, 33’-56’Jib, Auxiliary Winch,A/C Cab, Block, Ball,Auxiliary Light &ConveniencePackage, FOBCleveland, OH ..Call
Call Andy at 216-316-1511
23-24 EB
Skidsteers Starting at $14,500Call Dan 612-306-4496 22-23 PK
Komatsu PC 40-7 Compact Excavator, 5970Hrs, Cab, 4 Ton Unit, Serviced and Ready forWork.............................................................$19,500
Call Dan 612-306-4496 22-23 PK
2009 Ditch Witch JT100, 785 Hrs, ExtendedWarranty Through 7/26/14. 1740’ Rod, 10 RodBoxes, Reamers Included, Complete Accessory Kit
Call Tim 630-665-5600 22-23 JM
2003 Ditch Witch 1820 Walk-Behind Trencher,Good Condition, 481 Hrs, 36”x4” Combo Chain
Call Tim 630-665-5600 22-23 JM
1991 John Deere 300D, S/N 775834, OpenROPS..........................................................$19,000Call 502/456-4050 Ask for Melissa or Albert 23-24 EB
1994 Cat 953B, s/n 5MK01558, 9493 Hrs, OneOwner, New Undercarriage ........................$28,000
Call David 219-696-5680 22-23 JM
2003 Case 40XT, s/n JAF0387813, 850 Hrs,ROPS w/Soft Cab, Heater, 10x16.5 Tires, 60” Bkt .......................................................................$14,900
Call Steve 630-878-8765 22-23 JM
1998 Case 590SL, s/n JJG0210709, 8150 Hrs,Cab w/Heat, 2L Controls, Ext Hoe, Ride Control,24” Trench Bkt, 93” Front Bkt .....................$29,200
Call Mario 630-878-8396 22-23 JM
2004 Takeuchi TL130, s/n 21302831, 4577 Hrs,ROPS, Tak Controls, New Tracks, 67” Smooth Bkt......................................................................$15,500
Call Mike 219-712-7700 22-23 JM
1979 LS-98 Link Belt, 28.5 ton, ABCDCounterweights, Basic Boom Plus 1 10’ Section.............................................................$37,500 FOL IL
Courts Machinery • 507/678-2752 22-23 PK
2005 Cat 305CR, 3042 Hrs, Mitsubishi DieselRecently Rebuilt, 42 HP, 11,000 Lbs, FOBSalina, Ks................................................$39,500
Call Kirk Nelson at 785-823-6378www.sellersequipment.com 23-24 JM
2006 JCB 3CX Side Shift .....................$54,500
Call Kirk Nelson at 785-823-6378www.sellersequipment.com 23-24 JM
2002 Bobcat 430XHS Mini Excavator, 2795 Hrs.......................................................................$18,200
Call Gary Mertz 314-895-9500 22-23 JM
Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.
For more information, call Construction Equipment Guide today at
800/523-2200
2006 Doosan DL400, s/n 5099, Cab, Heat, AC &Bucket, 2859 Hrs ......................................$115,000
Call David 219-696-5680 22-23 JM
1996 Volvo A35C, 9500 Hrs, A/C, Retarder, GoodCondition, Ready to Work ..............................$59,000
573-883-6547 23-24 AP
AERIAL LIFTS
Manlifts
GRADALL / LULLSales - Service - Training
Modern EquipmentSales & Rental800-445-4381
BORING EQUIPMENT
Boring
2008 Yanmar CBL 40C,includes PTO, 3 pt. hitch,backhoe, loader bucketattached w/skid plate, greatcondition, 216 hrs..$32,500.
Vermeer Iowa641-628-2000
COMPACTION EQUIP.
Pneumatic Rollers
2009 Hamm HD14VV,ROPS, 1533 hours......Call
316-945-1015
CRANES
Rough Terrain Cranes
Terex TC4792, 23 ton, 92'four section boom onSterling chassis, 7600hours.....................$68,995.
Star Equipment800-369-2215
Badger 55 Ton, 156' ofstick, 29.5x25 tires, 2 winch-es..........................$75,000.
Call Andy414-881-5257
Crane Inspections
ALL TYPES OF CRANESINSPECTED AND
CERTIFIED
Accredited by the USDept. of Labor Under29CFR Part 1919 and
Accredited by CALOSHA
Call 215-639-2579Atlantic Crane
Inspection ServicesVisit us at www.atlantic-
crane.com
CRAWLER TRACTORS
Crawler Tractors
2009 John Deere 450J, longtrack, cab with A/C, power-abgle tile, 97'' blade, 3874hours ....................$65,000.
316-945-1015
EXCAVATORS
Hydraulic Excavators
Takeuchi TB1140, 32,000 #,18' dig depth, cab, heat,A/C, quick tach, tooth buck-et, 2020 hours .......$90,995.
Star Equipment800-369-2215
2010 John Deere 35D, longarm, rubber pads, ca withA/C, blade, 402 hours..............................$92,500.
316-945-1015
2007 John Deere 200DLC,28'' pads, aux hyds, coupler,Pilot controls, 3087 hours............................$127,500.
316-945-1015
NH Construction Equipment
New & UsedParts & Service
Modern EquipmentSales & Rental800-445-4381
Mini Excavators
1991 Bobcat 331, 12'' track,aux. hyds, blade, coupler,cab........................$12,750.
316-945-1015
Takeuchi TB015, 3000#,open ROPS, 15'' tooth buck-et, 475 hours ...........$6,495.
Star Equipment800-369-2215
NH Construction Equipment
New & UsedParts & Service
Modern EquipmentSales & Rental800-445-4381
FORKLIFTS
Industrial Forklifts
GRADALL / LULL
Sales - Service - Training
Modern Equipment
Sales & Rental
800-445-4381
Rough Terrain Forklifts
Gehl DL6, 6000#, 40' reach,
open ROPS, PWP, carriage
with forks, 1400
hours.....................$42,995.
Star Equipment
800-369-2215
LOADERS
Backhoe Loaders
2008 Yanmar CBL40A, 3 pt
hitch, PTO, backhoe loader
bucket with skid plate, very
good condition, 216 hours
..............................$31,000.
641-628-2000
2011 JCB 3CX-14, fully
loaded, 4WD, Servo con-
trols, powershift trans.,
Extra- Dig, pipe work loader,
1.4 ys bkt & 21'' bucket,
mint, low hours ............Call
908-625-0697
Skid Steer Loaders
2010 John Deere 318D, cab
with A/C, EH controls, 66''
GP bucket, 442 hours
..............................$30,375.
316-945-1015
1994 Mustang 940, includes
forks, good condition, 2116
hours.......................$5,500.
918-438-1560
Mustang 960, 60 HP, T-Bar,
single pin, heat, side win-
dows, tooth bucket, 3300
hours ......................$8,995.
Star Equipment
800-369-2215
Wheel Loaders
NH Construction Equipment
New & Used
Parts & Service
Modern Equipment
Sales & Rental
800-445-4381
2011 JCB 406B, cab, heat,
A/C, radial tires, limited slip
differentials, QC coupler,
hyd 1 yd bucket, set of
forks, frame, mint condition,
low hours .....................Call.
908-625-0697
Track Loaders
Takeuchi TL140, 80 HP,
cab, power-tach, rubber
tracks, 4200 hours
..............................$22,995.
Star Equipment
800-369-2215
MOTOR GRADERS
Graders
2009 John Deere 772D, 14'
blade, 6 WD, A/C, 3894
hours...................$206,500.
316-945-1015
SCRAPERS
Pull Behind Scrapers
2005 Miskin D-18, 18 Yard
Pull Pan Scraper, good con-
dition, 800 hours....$34,000.
219-616-6067
TRAINING
Operator Training
Are your operators compliant
with Federal Standards,
OSHA, ANSI, ISO?
MODERN GROUP
offers training for:
Front-end Loaders & Backhoes
Aerial work platforms (AWP)
(Boom & Scissor Lifts)
Rough Terrain Forklifts
(Gradall, Lull, JCB)
Skid Steer Loaders
For information, pricing or
reservations:
Call 1-800-223-3827
www.moderngroup.com
All prices include Trainer,
travel and material
NO HIDDEN COSTS
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.
For just an additional $20 your ad can be posted on our online searchable database for 30 days
Ad runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200CLASSIFIEDS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 89
2008 Bobcat T320 CTL, 785 Hrs, A91 Pkg, E/N 1053579...................................................$47,200
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Tulsa, OK 23-24 JM
2007 Bobcat S185 SSL, 717 Hrs, H51, Enclosed Cabw/Heat, Susp Seat, PowerBobTachTM, E/N 1054344
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Topeka, KS 23-24 JM
2006 Gehl 7810 SSL, 655 Hrs, Sold w/Bkt, E/N1042835 .........................................................$27,850
800-475-2290 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 23-24 JM
2006 Bobcat T300 CTL, 600 Hrs, Enclosed Cab, A/C,Heat, Bucket Positioning, Attach Control, Alarm, E/N1049043 .........................................................$40,800
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Wichita, KS 23-24 JM
The Easy Way To Advertise Your Equipment Valued At Less Than$1 Million Run In Two Consecutive Issues For $95
Page 90 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NEEDED BULLDOZER D7G WITHWINCH EST COST USER USA | WANTTO BUY FROM USER USER USA EASTCOST BULLDOZER D7G WITH WINCHOR RIPPER I NEED FAST 2 NO JUNK NOPAST 32000, 00USCONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975 OR MOB 1-514-386-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––BUCKET, FRONT LDR KOMATSUWA450L | FRONT BUCKET, (PREFERROCK) FOR A WA 450L , OR SOME-THING CLOSE TO SAME THAT WEMIGHT RE - LUG AND FAB / FITCONTACT: JACK CHERRYPHONE: 541-993-0228FAX: 509-767-2282EMAIL:[email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS • WEARE LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT, TRUCKS AND VEHICLESOF ALL SORTS. WE PREFER IN BULK,PERHAPS YOU HAVE COMPUTERIZEDYOUR SERVICE OR PARTS OPERATIONAND YOU HAVE BOOKS OR MANUALSYOU NO LONGER NEED, OR INVENTO-RIES YOU HAVE NOT SOLD. PERHAPSAS A DISCONTINUED PRODUCT LINE.WE WILL PURCHASE IN ANY USEABLECONDITION IN ANY AMOUNT YOUHAVE. PLEASE FEEL FREE TO CALL USAT 270-849-2270 OR EMAIL US.CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––BRIDGE DECK PAVER • NEEDTEREX/BIDWELL 4800 IN EARLY JANU-ARY IN FORT WORTH, TX. USACONTACT: WHITNEY BROUSSARDPHONE: 214-507-2157FAX: 817-232-8984EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU BR380 JG1 TRACK JAWCRUSHER • LATE MODEL LOW HOUR,USA LOCATIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING TO PURCHASECATERPILLAR D8K DOZERS, YEARMODEL 1980 AND UP WITH AFTER-COOLER AND SPACER PLATE AND RIP-PER. MACHINES MUST BE GOODLOOKING AND IN WORKING CONDI-TION WITH ORIGINAL PAINT. PLEASEOFFER ME WHAT YOU HAVE WITHBUNCH OF PICTURES, YEAR MODEL,SERIAL NUMBER, MACHINE CONDITIONAND FINAL OFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823EMAIL: [email protected]––––––––––––––––––––––––––––––––
BRH1100 TRAMAC 80MM PIN MOUNTFOR SAMSUNG210 • NEED 80MM SAM-SUNG SE210 PIN MOUNT FOR BRH110TRAMAC HAMMERCONTACT: JOHN NILSENPHONE: 914-261-0322FAX: 845-225-0797EMAIL:[email protected]––––––––––––––––––––––––––––––––LOADER TIRE W/RIM MODEL 55B SIZE175X25 12 STUD USED | USED TIRE/WRIM SIZE 17.5X25 12 STUD LOADER 55BMICHIGAN LOCATION, MASSACHU-SETTSCONTACT: TANYAPHONE: 508-587-0770EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 938G WHEEL LOADER • 4000HOURS +/-, COUPLER SYSTEM, CLEAN,WORK READYCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––24VOLT COIL SOLENOID FOR SAM-SUNG SE 130 PART#823024100 • PART#8230-24100CONTACT: LARRYPHONE: 313-550-5346EMAIL: [email protected]––––––––––––––––––––––––––––––––EXCAVATOR MOUNTED PILE HAMMERMKT • SEEKING MKT V5ESC EXCAVA-TOR MOUNTED PILE HAMMER. IF YOUHAVE MKT PILE HAMMERS FOR SALE,CONTACT JEFF LAWSON AT [email protected] WITHPICS/SPECS AND WHOLESALE PRIC-ING.CONTACT: JEFF LAWSONEMAIL: [email protected]––––––––––––––––––––––––––––––––TBM MACHINE • HI, FOR THE COMPA-NY, WHICH OPERATES IN UKRAINA, WELOOK FOR TBM MACHINE. I AM THEADVISOR THIS COMPANY. WE NEEDTBM MACHINE 15 METRES DIAME-TER.COULD YOU SEND ME CATALOGAND BID. HOW MUCH PRIZE 15METRES DIAMETER TBM MACHINE.THANK YOU FOR YOUR INTEREST ANDI WISH YOU GOOD WORK.CONTACT: WORLDWIDE SOLUTION LTDPHONE: +2347038909958FAX: +2347038909958EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR 613B PADDLE SCRAPER| NEED BOTH UPPER CHAIN IDLERSAND THE MOUNTING BRACKETS. ALSONEED BOTH MOUNTING BRACKETS. CONTACT: SIDPHONE: 281-389-7777EMAIL: [email protected]––––––––––––––––––––––––––––––––GPR MACHINE | A G.P.R GROUND PEN-ETRATIVE RAIDERCONTACT: ISAAC YAMOAHPHONE: +233541556965EMAIL:[email protected]––––––––––––––––––––––––––––––––
WHEEL LOADER | 966C, 966D, 966ECONTACT: ALHARTIPHONE: 00966540222206FAX: 00066541111407EMAIL:[email protected]––––––––––––––––––––––––––––––––1989 416 CAT TRANSMISSION USED |.J8 2411 6Y2589 416 1989 CATERPILLARTRAN #CONTACT: STEVEN SCHMIDTPHONE: 509-280-1926EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 & BR580 TRACKJAW CRUSHER | LATE MODEL LOWHOUR USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 235C, 225, 966E, D, FII, 970F, 972GI |SEND PICTURES AND THE FINALPRICES FOBCONTACT: ABDELGAWAD ALIEMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS |LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT, TRUCKS AND VEHICLESOF ALL SORTS. WE PREFER IN BULK,IF YOU HAVE COMPUTERIZED YOURSERVICE OR PARTS OPERATION ANDYOU HAVE BOOKS OR MANUALS YOUNO LONGER NEED, OR INVENTORIESYOU HAVE NOT SOLD, AS A DISCON-TINUED PRODUCT LINE, WE WILL PUR-CHASE IN ANY USEABLE CONDITION INANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––TRACTOR | USED 25-50 HPCONTACT: CRAIGPHONE: 6622955517EMAIL: [email protected]––––––––––––––––––––––––––––––––MILLER CST 280 WELDING MACHINESCONTACT: MARK RAFANIELLOPHONE: 7184900597FAX: 7182383073EMAIL:[email protected] ––––––––––––––––––––––––––––––––LOOKING TO PURCHASE USED FRACTANKS NO OLDER THAN 2 TO 3 YEARSOLD. I AM LOOKING TO PURCHASEANYWHERE FROM 15 TO 50 TANKS.I’VE GOT 70 NEW 102” CT OILFIELDFRAC TANKS W/ EXTERNAL MANI-FOLDS AND AM INTERESTED IN PUR-CHASING MORE USED FRAC TANKSCONTACT: SUSANPHONE: 512-236-0060, EXT 127EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED ALL THE TIME 12 MONTHS A 7DAYS BULLDOZER D3AT D10 2007 ANDUP USER USA USA CONTRACTORONLYCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––
NEED 331D BOBCAT EXCAVATOR FORPARTS. BAD MOTOR OKCONTACT: DON SMITHPHONE: 870-793-2147 OR 501-268-2041FAX: 870-793-3452EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR TBM MACHINE. NEEDTBM MACHINE 15 METERS DIAMETER.PLEASE SEND ME CATALOG AND BID. CONTACT: ALI BERBERPHONE: 00905425190635EMAIL: [email protected]––––––––––––––––––––––––––––––––FIAT ALLIS 14C DOZER | NEED MOTOR,OR COULD SELL FOR PARTS.CONTACT: PHIL DZIARDZIELPHONE: 307-359-0543FAX: 307-358-2039 |EMAIL:[email protected]––––––––––––––––––––––––––––––––GOOD USED DEERE 50D EXCAVATOR,OPEN ROPS IN VERY GOOD CONDI-TION. BOBCAT ALSO CONSIDERED.CONTACT: SCOTT H. CLYDEPHONE: 307-670-1024FAX: 866-290-8327EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED A 4 N 1 BUCKET FOR A CATERIL-LAR 941B CRAWLER/LOADERCONTACT: SIDPHONE: 281-389-7777FAX: 936-327-7777 |EMAIL:[email protected]––––––––––––––––––––––––––––––––LR DIESEL 185 TOWABLE AIR COM-PRESSOR WITH LOW HOURS.CONTACT: DAN THRAENPHONE: 319-265-1080EMAIL: [email protected]––––––––––––––––––––––––––––––––HITACHI EXCAVATORS EX200 & DYNA-PAC ROLLERS/COMPACTORSCA251/CA262 | NEED HITACHI EXCAVA-TORS EX200-1, EX200LC-1 & DYNAPACROLLERS CA251, CA262, CA301,CA362. SEND DETAILS, PICTURES OFMACHINE & YOUR BEST PRICE.CONTACT: HIDAYAT KHANPHONE: +92-345-8818803EMAIL:[email protected]––––––––––––––––––––––––––––––––CATERPILLAR WHEEL LOADER950/B/E, 966/C/D/E/F | LOOKING FORCATERPILLAR WHEEL LOADERS , 950,950B, 950E, 966D, 966E, 966F.OFFER &SEND DETAILS, PICTURES OFMACHINE & YOUR BEST PRICE.CONTACT: NAQIB KHANPHONE: +92-333-3298751EMAIL: [email protected]––––––––––––––––––––––––––––––––1999 OR NEWER CATERPILLAR BACK-HOE LOCATED IN THE SOUTH EAST-ERN UNITED STATES, NO MORE THAN1,000 MILES FROM FORT MYERS,FLORIDA. MACHINE MUST HAVE 4X4, ACAB WITH WORKING AIR CONDITION-ING AND A 4-IN-1 BUCKET. PRICED AT$25, 000 OR UNDER.CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––
USED ORANGE PEEL GRAPPLE FORMETAL SCRAP LOADING CAP.OF 8000-10000 LBSCONTACT: MARTIN ARZATEPHONE: 915-317-3682EMAIL: [email protected]–––––––––––––––––––––––––––––––– GRIZZLY ROCK SCREEN | WANTED AROCK SCREEN TO SEPARATE 4 TO 6”AND LARGER FROM DIRT.CONTACT: LARRY CRAFTPHONE: 850-545 7863EMAIL: [email protected]–––––––––––––––––––––––––––––––– NEED A DOOR FOR A CASE 465 SKIDSTEER | NEW OR USEDCONTACT: DOUG WIMERPHONE: 304-668-5057EMAIL: [email protected]–––––––––––––––––––––––––––––––– NEEDED TRUCK 777F 785 797 2005 ANDUP USER USA NO SALEMAN ONLY MINIG PLEASECONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]–––––––––––––––––––––––––––––––– JLG UT612 DROP DECK TRAILER OREQUIVALENT. DUAL AXLE DECK SIZE 6 X 12 MUST BE IN GOOD SHAPECONTACT: BJ BELLPHONE: 256-654-5041FAX: 256-462-3649EMAIL: [email protected]–––––––––––––––––––––––––––––––– NEED KOMATSU WHEEL LOADERWA600, WA900 , FORKLIFT 32 TON, 42TON, 1995 UPCONTACT: SALEHPHONE: 0567029867EMAIL: [email protected]–––––––––––––––––––––––––––––––– KALMAR FORKLIFT. DCD320-12LB,DS15-1200, DC 16-1200, DC20-1200.CONTACT: AHMEDEMAIL: [email protected]–––––––––––––––––––––––––––––––– NEED BULLDOZER D7G AND D7H WITHWINCH OR RIPPER, USA USER PLEASE NO SALEMANCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]–––––––––––––––––––––––––––––––– CRAFCO/CIMLINE TWR MELTER WITHHEATED HOSE.CONTACT: DAN MILLERPHONE: 908-362-5414EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU DOZERS | I AM LOOKINGFOR THE FOLLOWING USED KOMATSUDOZERS: D 6 5 D 8 5 D 1 5 5 EMAIL USWITH PICTURES, SERIAL NUMBER,YEAR MODEL, PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––
BOBCAT BRAND SKID STEER LOAD-ERS LOCATED IN THE SOUTH EAST-ERN UNITED STATES | AM PAYINGCASH FOR BOBCAT BRAND SKIDSTEER LOADERS. ESPECIALLY LOOK-ING FOR LARGE FRAME AND "GOLDPACKAGE" MACHINES, BUT ANY MAKEAND MODEL BOBCAT CONSIDERED.SEND PHOTO AND ASKING PRICE.***DEALERS NEED NOT RESPOND***CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 & BR580 TRACKJAW CRUSHERS | LATE MODEL LOWHOUR WORK READY USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––CATEPILLAR 3412 | LOOKING FOR THESPIDER ASSEMBLY AND THE SHAFTINPUT FOR THE 3412 CATERPILLAR.THE SPECS ARE AS FOLLOWS: SERIAL# 60M03370 ARRANGEMENT# 4N2247CLUTCH DESCRIPTION: MODEL#GM518-1 SERIAL # 3R5140 BOM# 37705RATIO# 6.48:1 I AM LOOKING FORTHEM NEW OR USED.CONTACT: ROBIN MILLERPHONE: 7867525438EMAIL:[email protected]––––––––––––––––––––––––––––––––YANMAR EXCAVATORCONTACT: JOHN SARAPPAPHONE: 856 767 1122FAX: 856 767 4931EMAIL: [email protected]––––––––––––––––––––––––––––––––MAS HEAVY EQUIPMENT | LOOKINGFOR EXCAVATOR DAEWOO OR DOS-SAN 290 LCV/300LCV/420LCV/470LCVCATERPILLAR 235 C OR D /225 SAM-SUNG 280-2 WHEEL LOADER CATER-PILLAR 920-930-936-950-966D E F -970F966G -972G-980G-980F DOZER CATER-PILLAR D9N&D10N KOM. 355CONTACT: MODY SHOUKRYPHONE: 8155435252 FAX: 8153986715EMAIL:[email protected]––––––––––––––––––––––––––––––––HYDRAULIC DRIVE MOTOR FOR ADITCH WITCH 5020 TRENCHERCONTACT: RICHARD SPRIGGSPHONE: 423-487-5048 EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED FAST KOMASTU 155A X 6 2009WITH RIPPER USER LOW LOW HOURS INEED 2CONTACT: JEAN MAURICE BOUTINEMAIL: [email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website
for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 91
ALEX LYON & SON
AUCTIONEERS
www.lyonauction.com
315-633-2944�
•�Houston,�TX
Tues.,�November�13,�2012
For:�Construction
Equipment,�Forklifts,
Aerial�Lifts,�Trucks�and
Trailers
•�Parkersburg,�WV
Fri.,�November�16,�2012
For:�Construction
Equipment
•�Barranquilla,�Columbia
Sat.,�November�24,�2012
For:�Late�Model
Construction�and�Support
Equipment
•�Atlanta,�GA
Wed.,�November�28,�2012
For:�Construction
Equipment,�Trucks�&
Trailers
•�Detroit,�MI
Wed.,�November�30,�2012
For:�Forklifts,�Booms,
Scissor�Lifts�and�Utility
Trucks
•�Dallas,�TX
Mon.,�December�3,�2012
For:�Construction
Equipment,�Forklifts,
Aerial�Lifts,�Trucks�and
Trailers
•�Cleveland,�OH
Fri.,�December�7,�2012
For:�Construction
Equipment,�Trucks�&
Trailers
•�Columbus,�OH
Sat.,�December�8,�2012
For:�Late�Model�Cat
Rental�Machines
•�Kissimmee,�FL
Wed.,�Dec�13,�2012
For:�Construction
Equipment,�Trucks�&
Trailers
•�Atlantic�City,�NJ
Sat.,�December�15,�2012
For:�Construction
Equipment,�Trucks�and
Trailers
•�Greenwich,�NY
Fri.,�December�28,�2012
For:�Construction
Equipment,�Trucks�and
Trailers
•�Manassas,�VA
Sat.,�January�12,�2012
For:�Construction
Equipment,�Trucks�&
Trailer,�Aerials�and
Forklifts
•�Kissimmee,�FL
Sat.-Sun.,�February�2-10,
2013
For:�Annual�9�Day
Auction!�Construction
Equipment,�Trucks,
Trailers,�Support
RITCHIE BROS.
AUCTIONEERS
www.rbauction.com
402-421-2631
•�Bozeman,�MT
November�13,�2012
•�Houston,�TX
November�14-15,�2012
•�Pittsburgh,�PA
November�15,�2012
•�Phoenix,�AZ
November�15,�2012
•�Atlanta,�GA
November�29,�2012
•�Hartford,�CT
December�4,�2012
•�Fort�Worth,�TX
December�4,�2012
•�Chehalis,�WA
December�6,�2012
•�Columbus,�OH
December�6,�2012
•�Kansas�City,�MO
December�7,�2012
•�Denver,�CO
December�11,�2012
•�Chicago,�IL
December�12,�2012
•�Raleigh-Durham,�NC
December�12,�2012
•�Sacramento,�CA
December�13,�2012
•�Albuquerque
December�14,�2012
•�Jackson,�MS
December�14,�2012
•�Minneapolis,�MN
December�14,�2012
•�Salt�Lake�City,�UT
December�18,�2012
•�Northeast,�MD
December�18,�2012
•�Nashville,�TN
December�19,�2012
•�Lo�Angeles,�CA
December�19-20,�2012
•�St.�Louis,�MO
December�20,�2012
•�Orlando,�FL
February�18-23,�2013
AUCTION MARKETERS
www.auction-marketer.com
614-833-2454
•�Fairborn,�OH
Thurs.,�November�15,
2012
For:�Concrete�and
Construction�Equipment
BLACKMON
AUCTIONS, INC.
www.blackmonauctions.com
501-664-4526
•�Berryville,�AR
Tues.,�November�13,�2012
For:�One�Owner�-
Construction�Equipment
Auction
CAT AUCTION SERVICES
www.catauctions.com
866-750-9432�
•�Houston,�TX
Tues.,�November�13,�2012
For:�Construction
Equipment
•�Pittsburgh
Thurs.,�November�15,
2012
For:�Construction
Equipment
DAVIS AUCTIONS
www.davisauctionsinc.com
�203-758-4087
•�Prospect,�CT
December�8,�2012
For:�Construction
Equipment
DEANCO AUCTIONS
www.deancoauction.com
601-656-9768
•�Philadelphia,�MS
Wed./Thu.,�Nov.�14-15,
2012
For:�Huge�2-Day�Public
Auction
DEL PETERSON
& ASSOCIATES
www.delpeterson.com
�800-492-9090
•�Online�Only
Closing�November�20,
2012
For:�Construction
Equipment,�Trucks�&
Trailers
•�New�Ross,�IN
Thurs.,�December�6�2012
For:�Farm�Equipment
•�Online�Only
Closing�December�18,
2012
For:�Construction
Equipment,�Trucks�&
Trailers
•�Online�Only
Closing�February�5,�2013
For:�Late�Model�John
Deere�Farm�Equipment
DON SMOCK
AUCTION CO., INC.
www.dsa-auctions.com
765-778-9277
•�Pendleton,�IN
March�29,�2013
For:�Construction
Equipment
•�Pendleton,�IN
June�21,�2013
For:�Construction
Equipment
•�Pendleton,�IN
September�20,�2013
For:�Construction
Equipment
•�Pendleton,�IN
December�13,�2013
For:�Construction
Equipment
FREY & SONS, INC.
www.freyandsons.com
�419-455-3739
•�Mogadore,�OH
Fri.,�November�30,�2012
For:�Construction�and
Aggregate�Equipment
HUNYADY
AUCTION COMPANY
www.hunyady.com
�800-233-6898
•�Blakeslee,�PA
Thurs.,�November�15,
2012
For:�Complete�Liquidation
–�BFB�Excavating,�Inc.
•�Altoona,�PA
Wed.,�December�5,�2012
For:�Complete�Engine
Building�Facility
•�Dunbar,�PA
Wed.,�December�12,�2012
For:�Construction
Equipment,�Trucks,�Trailer
and�Rollers
ITL AUCTIONEERING
www.itlauctions.us
508-824-3262
•�Taunton,�MA
Sat.,�December�8,�2012
For:�Construction
Equipment
IRAY AUCTIONS
www.iraymn.com
�320-968-7230
•�Foley,�MN
Fri.,�November�30,�2012
IRON PLANET AUCTIONS
www.ironplanet.com
�888-433-5426
ONLINE�AUCTIONS
Go�to�www.ironplanet.com
to view the complete auc-
tion schedules, inspection
reports and to place your
bid!
•�ONLINE�ONLY
November�14,�2012For:�ConstructionEquipment
•�ONLINE�ONLY
December�5,�2012For:�ConstructionEquipment
JAMES G. MURPHY INC.
AUCTIONEERS
www.murphyauction.com
�800-426-3008
•�Chemult,�ORTues.,�November�13,�2012For:�Construction�andAggregate�Equipment
MEEKINS
AUCTION COMPANY
www.meekinsauction.com
�800-499-6560
•�Lumberton,�NCSat.,�November�24,�2012For:�ConstructionEquipment
•�Wilson,�NCThurs.,�January�31,�2013For:�ConstructionEquipment
NORTH COUNTRY
AUCTIONS
www.northcountry-auc-
tions.com
603-539-5322
•�Northwood,�NH
Sat.,�November�17,�2012For:�Trucks,�Trailers
PAUL E. SAPERSTEIN INC.
www.pesco.com
�800-660-6553
•�Holbrook,�MA
Tues.,�November�13,�2012For:�ConstructionEquipment�and�Trucks
PETROWSKY
AUCTIONEERS INC.
www.petrowskyauction-
eers.com
�860-642-4200
•�Chelmsford,�MAThur.,�November�29,�2012For:�ConstructionEquipment
•�North�Franklin,�CT
Fri/Sat,�December�14-15,
2012
For:�Construction
Equipment,�Trucks�&
Trailers,�Support,�AG�and
Landscape�Equipment
PURPLE WAVE AUCTION
www.purplewave.com
�866-608-9283
•�ONLINE�ONLY
Thurs.,�November�15,
2012
For:�Construction
Equipment
•�ONLINE�ONLY
Tues.,�November�20,�2012
For:�Construction
Equipment
QUANTOS AUCTIONS
www.quantosauctions.com
253-236-8555
•�ONLINE�ONLY
Wed/Thur,�November�28-
29,�2012
For:�Construction
Equipment
RITCHASON
AUCTIONEERS INC.
www.ritchason.com
�800-806-3395
•�Lebanon,�TN
Sat.,�December�1,�2012
For:�Construction
Equipment
ROLLER AUCTIONEERS
www.rollerauction.com
�866-515-1668
•�Henderson,�CO
Tues.,�November�13,�2012
For:�Construction�&
Contracting�Equipment
STEFFES
AUCTIONEERS INC.
www.steffesauctioneers.com
�701-237-9173
•�Online�Only
November�1-12�2012
For:�Construction, Ag,
Trucks and Vehicles
•�Bismarck,�ND
November�15,�2012
For:�Welders, Crane,
Milling Machine, Forklifts
•�West�Fargo,�ND
Wed.,�November�28�2012
For:�Construction and
Farm Equipment
•�Online�Only
December�1-11�2012
For:�Construction, Ag,
Trucks and Vehicles
•�Litchfield,�MN
Thurs.,�Dec.�20,�2012
2012
For:�Construction, Ag,
Trucks and Vehicles
THE AUCTION COMPANY
www.theauctioncompany.net
951-657-5300�
•�Northern�CA
Sat.,�November�17,�2012
For:�Construction
Equipment,�Trucks,�Govt.
Vehicle
•�Southern�CA
Sat.,�December�8,�2012
For:�Construction
Equipment,�Trucks,
Trailers
•�Northern�CA
Sat.,�December�15,�2012
For:�Construction
Equipment,�Trucks,�Govt.
Vehicles
UTILITY AUCTIONS
www.utilityauctions.net
�302-530-9103
•�Wilmington,�DE
Fri.,�December�14,�2012
For:�Construction�and
Utility�Equipment
VAUGHAN
AUCTION GROUP
www.vaughanauctiongroup.com
�903-873-6777
•�Wills�Point,�TX
Thurs.,�December�6,�2012
For:�Winter�Contractor’s
Public�Auction
WILSON AUCTION &
REALTY CO., LTD.
www.wilsonauctionltd.com
�419-636-5500
•�Newbury,�OH
Mon-Fri.,�November�12-
16,�2012
For:�Newbury�Sand�and
Gravel
•�Mt.�Vernon,�OH
Thurs.,�November�15,
2012
For:�Construction
Equipment,�Trucks�and
Trailers
YODER & FREY
AUCTIONEERS, INC.
www.yoderandfrey.com
�419-865-3990
•�Kissimmee,�FL
February�11-18,�2013
For:�Construction
Equipment,�Trucks�and
Trailers
AuctionsComing
Page 92 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 93
www.lyonauction.com corporate offices: Bridgeport, NY Phone: (315) 633-2944 • Fax: (315) 633-5635 www.lyonauctionlive.com
Sales Managers & Auctioneers, Inc.
ALEX
LYON & SON
FRI., NOV. 30 @ 9:30 AM
NOTE: After completing several major jobs in the Metro Detroitarea, we will sell the following equipment and trucks used onthose particular jobs.
EARLY HILITES: 2 ROUGH TERRAIN CRANES: TerexRT230, 3 TELESCOPIC FORKLIFTS: Skytrak 8042, Skytrak 60362, TCI Dynalift D4P73, 3 BOOM
LIFTS: (2) JLG 600S (4x4), 2005 JLG 400S (4x4), 7 SCISSOR LIFTS: (5) JLG 40RTS, JLG, Grove electric,Genie Super Lift, RUBBER TRACKED SKID STEERS: 2005 Bobcat T190, SKID STEERS: 2007 NHL185, FORKLIFTS: Yale GLP060 6,000lb., 2 AIR COMPRESSORS: (2) IR 175, 18 WELDERS: (2) Miller440, Miller 220, (5) Miller Big Blue 215D, (2) Lincoln SP125, Lincoln LN25, Lincoln Arc, Bobcat 225, Studwelder, Nelson Stud welder, Nelson Electric Stud, LP/Gas, DUMP TRUCK: 1999 GMC C7500 (s/a), 2
TRUCK TRACTORS: 1988 Kenworth T800 Michigan Special (quad.), Autocar (Michigan Special), 5
STAKE TRUCKS: 2005-(2) 2004 -2003 Ford F450XL Super Duty 12ft., Parts Truck: 1997 Ford F Super Duty12ft., SERVICE TRUCK: 1994 Ford F450, UTILITY TRUCKS: 2001 Chevy Silverado, DETACHABLE
GOOSENECK TRAILER: Hyster 50 ton 22ft. flat well- 11ft. rear deck (tri.), EQUIPMENT TRAILER:
Trailking 50 ton (t/a), 3 TAGALONG TRAILER: Econoline Backhoe Pro 10 ton 18ft. (t/a), New Doolittle 8ft.(s/a), 1995 Dynaweld 10 ton (t/a), 2 FLOW BOY TRAILERS: (2) 2000 FlowBoy (8 axle), 2 DUMP TRAIL-
ERS: 1999 East (quad.), 1999 EZ Dumper EZ712DX 12ft. (t/a), 4 VAN TRAILERS: 53ft. Aluminum (t/a),1988 Fruehauf FGG6 28ft. (s/a), 1985 Stoughton FRPDW-285S-WEDGE 28ft. (s/a), 1983 Monon FA70DBLW28ft. (s/a), FLATBED TRAILER: 48in. x 60in. Diamond Plate Steel bed, UTILITY VEHICLE: 4 wheeledtow behind cart, ATTACHMENTS: Excavator Thumbs: New Fabtech 5500, New Fabtech 4800, Skid Steers:New 60in. -78in. Smooth- Stump- Rock & Mulch Buckets, New Mount Plates, New Versatech GrappleBuckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Fabtech 60in. Brush Cutters,New Fabtech Backhoe Attachments, New Fabtech 60in. - 72in. Grapple Buckets, New Fabtech 66in. RootGrapples, New Fabtech 60in. Hay Spears, New Fabtech Stump Buckets, New Fabtech 428in. Forks & Frame,New Fabtech Quick Attach Plates, Backhoes: Case 12in. Bucket, Lifts: 8ft. Bucket for Skytrak, (2) ForkliftMan Baskets, SUPPORT EQUIPMENT: (30) 5 Gal. Misc. Fuel/Gas Cans, Kory Farm Equipment 12ft.Running Gear Set, (17) Portable Fuel Tanks, (15) WeatherGuard Tool Boxes, Knaack 40in.x24in. Tool Boxes,Knaack 48in. x48in. Tool Box, Nelson Stud Welder, Steel Storage Rack, Large Qty Electric Drill Motors:Makita – Milwaukee- Dewalt, Air And Electric Air Impact Wrenches: 1 Inch & 3/4 Inch, Pneumatic Steel DeckNailer, Qty Of 50 Torch Heads, Makita-Partner – Husqvarna Chop Saws, 1 Inch - 3/4 In & 7/8 In. Large Qty OfRigging Spreaders, Miller & Lincoln Welders: Wire Feed & Arc. Qty 10 Mixed, New 4 Pack Ratchet Straps,New Impact Wrenches, New Premium Diamond Blades, New Mustang Submersible Pumps, New Stiff NeckPintle Hitches, New Huskie Hammer Drill, New Air Spray Guns, New Mustang Concrete Vibrators, NewMustang Plate Compactors, New 5 Ton Digital Platform Scales.
Address: 5383 Perry Drive, Waterford, MI 48329.DIRECTIONS: From Oakland County International Airport: East on Highland Rd. toward Whittier St., .7
miles, left onto Airport Rd., 1.7 miles, Right on Pleasant Dr .5 miles, continue onto Perry Dr.. Site on left. FromDetroit Metro International Airport: I-94E ramp to Detroit 5.7 miles, take exit 204 for Michigan 39 N/
Southfields Fwy. N 1.4 miles. Merge onto M-39 N/ Southfield Fwy 13.2 miles, take exit 16 on left for Michigan10N toward Interstate 696 W/ Lansing .5 miles., Merge onto M-10N 3.5 miles, take exit 18A to merge onto US-
24 N/ Telegraph Rd. 11.1 miles. Left onto W Huron St. 1.4 miles, continue on Highland Rd.. Site on right.
SALE SITE PHONE: (248) 388-0918
AUCTION
INVENTORY REDUCTIONONE OWNER!
DETROIT,(WATERFORD)MICHIGAN
TELESCOPIC FORKLIFTS, BOOM & SCISSOR LIFTS,
UTILITY TRUCKS, LARGE QUANTITY OF SUPPORT EQUIPMENT.
SAT., NOV. 10 @ 9:00 AM(EARLY START)
HILITES: 4 HYDRAULIC EXCAVATORS, MOTOR
GRADERS, 2 CRAWLER TRACTORS, 3 CRAWLER
LOADERS, SOIL COMPACTORS, VIBRATORY
ROLLERS, SKID STEERS, TELESCOPIC FORKLIFT,
BOOM & SCISSOR LIFTS, 2 PULLING TRACTORS,
AGRICULTURAL TRACTORS, DUMP TRKS, TRUCK
TRACTORS, DETACHABLE GOOSENECK TRAILER, 4
TAGALONG TRAILERS: (3) 2012 Doolittle 23ft. (t/a), 2DUMP TRAILERS, CAMPERS, HEATING EQUIPMENT,
ATTACHMENTS, SUPPORT EQUIP.
1755 S. E. Frontage Road, Sturtevant, WI 53177
SITE PHONE: 262-886-2778, (262) 903-6269
REG. WI AUCTION FIRM: #223-053 Alex Lyon & Son, Sales Managers & Auctioneers, Inc.
REG. WISCONSIN AUCTIONEER: #1878-052 Jack Lyon
AUCTION
FINAL PHASEBELL LAND IMPROVEMENT
RACINE, (STURTEVANT)WISCONSIN
LATE MODEL RENTAL FLEET CONSTRUCTION,
SUPPORT EQUIPMENT, AERIALS, TRUCKS
& TRAILERS AUCTION.
PLUS: OVER 1000 LOTS OF NEW & LIKE NEW SUPPORT,
TOOLS, LAWN & GARDEN EQUIPMENT FROM THE
LARGEST WHOLESALE HOUSE IN AMERICA.
Page 94 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Doosan DL550 Wheel Loader Handles Tough ApplicationsNumerous performance, comfort
and reliability enhancementsaccompany interim Tier IV (iT4)compliance on the Doosan DL550wheel loader, which replaces theDL500 loader model.Improvements ranging from moreengine horsepower to increaseddriving power and steering capabil-ities highlight the 7.5-cu.-yd. (5.7cu m) wheel loader.The DL550 is the largest wheel
loader in the Doosan line. With anoperating weight of 69,655 lbs.(31,595 kg), breakout force of58,450 lbs. and a full-turn tippingcapacity of 48,061 lbs. (21,800 kg),the DL550 is designed for largermaterial handling applications,such as quarries, mines and manu-facturing operations.
PowerThe DL550 horsepower has been
increased to 380 (283 kW) with a 6-cylinder diesel engine that has beenoptimized for use with selective cat-alyst reduction (SCR) and dieselexhaust fluid (DEF) to comply withiT4 emission regulations. Engineswith this configuration are opti-mized to reduce particulate matter(PM) by operating at higher com-bustion temperatures and to reducenitrogen oxides (NOX) withexhaust after-treatment using SCRtechnology. Additionally, SCR systems offerincreased fuel efficiency due to the engineoptimization, which improves fuel burn.The 775-cu.-in. (12.7 L) engine features a
high-pressure common-rail (HPCR) designwith direct fuel injection, electronic controland four valves per cylinder. The high-pres-sure common-rail system increases the effi-ciency of fuel delivery by increasing thepressure up to 34,000 psi. The increasedpressure allows the injector to inject a finermist into the engine, which results in a moreefficient combustion that in turn producesmore torque and improved fuel economy,less noise, lower operating costs and cleanerexhaust, according to the manufacturer.
PerformanceDesigned with improved lifting perform-
ance, the DL550 offers operators the abilityto set upper and lower limits for both the liftarm and bucket stop positions from insidethe cab. This provides improved control ofthe lift arm and bucket positions and is par-ticularly useful when setting return-to-digpositions for the lift arm and bucket, whichreduces cycle times in digging and loadingapplications. This feature allows the DL550to effectively move material overhead with a
dump height of 11 ft. 2 in. (3.4 m).The new automatic reversing cooling fan
can be set to run in reverse to assist in keep-ing the cooling system clean. The operatorcan select to reverse the fan via a switch, orit can be set to automatically reverse on apreset time frame. Each time the fan revers-es, it will run in reverse for few minutes toclean the cooling system. This helps in dirtyand dusty conditions to keep the machinerunning at optimal performance, using lesspower to cool the machine. This results inlonger working hours and shorter mainte-nance time to clean the cooling system.This wheel loader’s new auto-idle feature
provides additional noise reduction and fuelsavings by reducing the working idle of thewheel loader from 950 rpm to a standby idlesetting of 750 rpm when the machine is inac-tive for a short period of time.The upgraded DL550 features a hydraulic
locking differential available as an alterna-tive to the standard limited slip differential.The hydraulic locking differential comesstandard and provides increased drivingpower when one wheel spins or loses trac-tion, allowing the machine to navigate toughterrain. The differential may be locked man-ually or automatically, based on ground con-ditions.
Another common option for the DL550 isa torque converter lockup clutch. Thisenables the machine to climb grades easierand faster, increasing productivity as muchas 20 percent in certain stockpiling applica-tions. For those requiring additional dump-ing capabilities, the DL550 also is availablein a high- lift configuration.
ComfortThe DL550 is now equipped with option-
al electric steering to decrease operatorfatigue during repetitive cycle operations onthe job site. A joystick has been added to theleft armrest that allows the operator to con-trol the directional movement without hav-ing to use the steering wheel. A new doormakes getting in and out of Doosan wheelloaders — and cleaning the inside of the cab— much easier. The air suspension seat withheat is offered standard on the DL550.Interior cabin improvements also include
a number of multi-function display panelupgrades on a centralized monitor thatallows the operator to view comprehensivemachine system information. The central-ized monitor displays critical machine infor-mation — such as engine rpm, enginecoolant temperature, fuel level, DEF level,machine warnings, time and the transmis-
sion selected gear. A key exterior cabinimprovement is lowered front side glass,providing improved visibility of operations.
ReliabilityMore new options for Doosan wheel load-
ers include a diesel-powered coolant heaterto improve starting in cold weather or ablock heater that warms the engine coolantbefore engine startup with an electricalheater.Service intervals on the front lift arm pins
have increased from 50 to 250 hours, reduc-ing operating costs and downtime. Tilt cylin-der hydraulic hoses have been rerouted forimproved hose reliability, better hose move-ment and improved visibility to the attach-ment.The DL550 — like every new Doosan
machine — is covered by a 48 hour partsguarantee. The program guarantees that if a“machine-debilitating” part is needed,Doosan will deliver it directly to the end userwithin two business days or Doosan will payfor a replacement machine rental. The 48hour parts guarantee is subject to carrierdelivery restrictions and/or governmentalagency delays.For more information, visit
www.dosanequipment.com.
The DL550 is the largest wheel loader in the Doosan line. With an operating weight of 69,655 lbs. (31,595 kg), breakout force of 58,450lbs. and a full-turn tipping capacity of 48,061 lbs. (21,800 kg), the DL550 is designed for larger material handling applications, suchas quarries, mines and manufacturing operations.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 95
CAT AUCTION SERVICES860 Blue Gentian Road, Suite 100 Eagan, MN 55121
855.228.2286 [email protected]
Follow the new leader.®
www.catauctions.com
AUCTIONSUPCOMINGFOLLOW THE NEW LEADER TO OUR
Equipment subject to change. View updated equipment lists at www.catauctions.com
2008 CAT CS56 NOV 14
1996 GROVE RT9100 DEC 14
2009 CAT 336DL NOV 13
1999 CAT D10R NOV 15
©2012 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
NOV. 13 HOUSTON, TXNOV. 14 PITTSBURGH, PA NOV. 15 DEC. 12 DEC. 14 LAS VEGAS, NV
www.catauctions.com
Our auctions offer a wide variety of equipment makes and models, as well as premium services from the Cat name you already know and trust. Search the full equipment listing and register to bid online at:
ONLINEBIDDINGAVAILABLE!
EH TWLLOOF
TREDAE LWNEE
UR OO
. 1VON
. 1VON
TTI P4. 1UHO3. 1
GBURSTT,ONTSU
AP,HGXT
. 1VON
. 1CED
. 1CED
5. 12. 1
SAL4. 1
SAGE VS
NV,
Search the full equipment listing and register to bid online at:
. 1
well as premium services from the Cat name you already know and trust. Our auctions offer a wide variety of equipment makes and models, as
.catauctions.comwww
CED
Search the full equipment listing and register to bid online at:
S
well as premium services from the Cat name you already know and trust. Our auctions offer a wide variety of equipment makes and models, as
.catauctions.com
AL4. 1
Search the full equipment listing and register to bid online at:
S
well as premium services from the Cat name you already know and trust. Our auctions offer a wide variety of equipment makes and models, as
.catauctions.com
AGE VS
IDDING
NV
BNLINEO
well as premium services from the Cat name you already know and trust. Our auctions offer a wide variety of equipment makes and models, as
.catauctions.com
,
.catauctions.comwwwFollow the new leader
are trademarks of Caterpillar and may not be used without permission.. All Rights Reserved. CA©2012 Caterpillar
.catauctions.comFollow the new leader
are trademarks of Caterpillar and may not be used without permission.TERPILLAR, their respective logos and “Caterpillar Y, CAT. All Rights Reserved. CA
860 Blue Gentian Road, Suite 100 855.228.2286
®.
,” as well as corporate and product identity used herein, ellowTERPILLAR, their respective logos and “Caterpillar Y
860 Blue Gentian Road, Suite 100 TION SERVICUAT CAAT
855.228.2286
Eagan, MN [email protected]
,” as well as corporate and product identity used herein, AILABLE!VVAILABLE!AAVIDDINGB
SECTION SERVI Eagan, MN 55121
wwwequipment lists atquipment subject to change. E
.catauctions.comwwwiew updated Vquipment subject to change.
Page 96 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 97
Page 98 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
are first zproduction machines built for customer acceptancetesting, to validate fuel burn, controllability, reliability andperformance of the 336E H. In a formal production studycompleted in August 2012, results included greater fuel effi-ciency, and lower cab and spectator noise levels than the336E and 336D. Additionally, the ACS valve, which intelli-gently manages restrictions and flows to seamlessly controlmachine motion, has been in the field since 2008 withincreased performance and reliability. The ACS and hybridsystem also have proven to work well together to maximizeperformance and controllability of work tools, includinghammers, shears and grapples, according to the manufactur-er.
Product Support and Dealer ReadinessCustomer support for the 336E H is provided exclusively
by the on-the-ground support of Caterpillar’s worldwidedealer network. For decades, Cat dealers have made signifi-cant and substantial investments in facilities, people andexpertise to support Cat excavators, including the new 336EH. Cat dealers know and understand hydraulics, and are pre-pared to consult with customers to help determine which Catexcavator model, whether hybrid or standard, is the bestmatch for a customer. Dealers also are equipped with toolsdeveloped by Caterpillar that help them weigh factors intotheir recommendations, including a customer’s projected
equipment use, budget and anticipated years of ownership tohelp ensure the proper decision. The 336E H also can bebundled with extended warranties and service contracts.
Caterpillar Position on TechnologyAccording to Utley, it is the company’s vertical integra-
tion and broad technology portfolio, coupled with its widerange of application experience that enable Caterpillar toselect and develop the optimal technologies for each Catmachine and varied customer applications.
“Our commitment is to match technologies to customervalue,” she said. “That means Caterpillar will include hybridelements in machines where it is evident those elements arethe most efficient and effective means of improving value toour customers, which is definitely what we’ve done with the336E H.
“Hybrid technology is a key element of our customer-focused technology portfolio, and so are our next generationpowertrains, autonomy, alternative fuels, and engine emis-sions and efficiency,” Utley added. “The new hydraulichybrid technology Caterpillar developed for the 336E H isan outstanding example of the results we’re achieving fromour technology strategy. It provides a critical bridge as wecontinue to research, develop and build the technologies ofthe future — technologies that will help ensure our cus-tomers’ business success.”
336E H Provides Enchancements, MoreHorsepower, Greater Fuel Efficiency
CAT from page 78
Col. Raymond S. Henry - WI Lic. # 2490-52; MN Lic. # 05-12-11Real Estate Auctioneer & GPPA Certified Equipment Appraiser
Accepting Excavators, Dozers, Loaders,Semis, Trucks,
Trailers and Related Equipment!
Jct MN Hwy 95 & 25 Foley, MN
Accepting Consignments Until Noon on Saturday, November 24th, 2012
'06 JD 755C Series IIMeter Reads 2,000 Hours, Cab, Air, Rock Bucket,One Owner, Scheduled Maintenance, Like New
This & many more excellent pieces of equipment available
at our November auction
For More Information Visit www.iraymn.com
Auction
Robert G. Frey, AuctioneerArchbold, Ohio 43502
Phone 419-445-3739 • www.freyandsons.com
Friday, November 30, 2012 - 9:30am1124 Randolph Rd, Mogadore (Akron Area), Ohio
Note: Mr. Bill West of Hilltop Aggregates is retiring and has reclaimed his pit, and will offer the following equipment at auction. See freyauctions.com for details, photos and online bidding.
Terms: Pay in full sale day cash or guaranteed funds. 10% buyer premi-um on items $2500 and less. Items As-is, where-is.
Aggregate Equipment: '95 McLanahan 11x40 Dual Tank Sand Classifier; '02McLanahan 44''x33' Fine Material Double Screw; '95 McLanahan 44''x33' FineMaterial Single Screw; Simplicity 6x18 3-Deck Incline Screen; Simplicity 5x16 3-Deck Incline Screen, SN:3516-9512AX-3951; Simplicity 4x12 2-Deck InclinedScreen, SN:2412-M110A-3690; Simplicity 3x6 1-Deck Inclined Screen, SN:136-M45-4315; Eagle 334366 Twin Shaft Log Washer, SN:14342; Powerscreen Portable Screen & Port. Stacking Conveyor; 36''x150'Radial Stacking Conveyor, Boom / Winch type Lift. 24''x100' Radial Stackers; 24''x100' & 24''x50' Lattice Fixed Stackers;36''x140', 30''x140', (2) 24''x50' & 24''x40' Lattice Frame Conveyors. (2) 24''x80, (2) 24''x50', 30''x45', (2) 24''x25', 34''x12'Channel Conveyors. 20x7 Feed Hopper; 12'x12' Surge Bin; Elec. House; 8'' Turbine Float Pump; (3) Turbine Pumps; TruckScale; Gilson Shaker & Sieves, Scales & QC Equipment.
Earthmoving: '99 Komatsu PC400LC-6LK Hyd. Exc, 68'' WB Bucket; '99 Cat 330BL, SN:6DR2818, QT, Aux. Hyd.8875 hrs; ‘00 Kobelco SK235SR-LC 0-turn Exc, QT 24” Bkt; (2) '92 Cat D400D 6x6 Artic Dumps, SN:8TF520 & 515,11677 & 15470 hrs; '96 Cat D7H-II Dozer, Cab/Air, Straight / Tilt, Diff Steer, NICE; '95 Cat D6H-II, SN:3ZF6126,EROPS, Diff Steer, Winch, 11000 hrs; '87 Cat D6H, SN:4RC1388, ROPS, Straight/Tilt; Cat D6H, ROPS, Diff Steer,Straight/Tilt; '05 Cat D3GXL, ROPS, 6 Way, 1065 hrs; '93 Cat D3C, SN:4HJ871, ROPS, 6 Way; (2) 05/06 Case 580SM4x4 TLBs, Xhoe, EROPS, 950 & 1150 hrs; '96 Cat CP563C Padfoot Compactor, Blade, 2516 hrs; '05 Bobcat S185 & 751Skidloaders; Morbark 10 Chipper, Cummins; Miller Air Pak 400 Diesel & (3) Portable Welders; 6'' Cat Diesel Pump; pluslots of shop items.
Trucks & Trailers: '09 Talbert 55 Ton Triaxle Lowboy; '05 KW T800 Tractor, Cat C13, 18 Speed, 276k; Raven 28’ 3-Axle Alum. Dump; '00 Ford F250XLT Ext. Cab Pickup; '97 Ford SD350 Flatbed, Gas, ONLY 17750 mi; '95 & '91 FordF250 Pickups; White 4000g Water Truck & more!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 99
Wednesday, December 5
One-Owner Auction
2006 TESMEC TRS 1475
2008 KOMATSU D155AX-6
2001 TESMEC TRS 1675
2004 KOMATSU WA450-5L
2001 TESMEC TRS 1100
2007 KOMATSU D65WX-15E0
2007 CAT 14H VHP
2003 CAT 950G SERIES II
TRENCOR 1260HD
2007 INGERSOLL-RAND SD-116 DX-TF
2006 CAT D9T
1997 KOMATSU D65EX-12
2007 CAT D8T
2006 CAT 140H VHP
CAT 623F
Go to www.ironplanet.com to see the complete list of equipment, review the guaranteed inspection reports, and place your bids.
California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. Copyright © 1999-2012 IronPlanet, Inc. All Rights Reserved. IronPlanet®, IronClad Assurance® and Auctions you can trust® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.
Featuring equipment from
Page 100 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
and proven welding technologies for the construction indus-try. Every piece of welding equipment Miron Constructionused on the project was designed and manufactured byMiller. This includes the latest in engine-driven weldingtechnology, weld fume extraction equipment and weldingsafety gear. The companies also worked together to converttraditional processes over to new methods of improvingweld quality, productivity and safety, such as using Flux-Cored welding and induction heating technology in struc-tural steel applications.“Welding isn’t often the first thing people think of when
they think of the construction industry,” said Weller, “but itis one of the most critical elements of a heavy structural joblike this and provides us with the perfect opportunity toshowcase these technologies — and to do so on a local stagewith other Wisconsin-based companies. The Green BayPackers, Miller and Miron Construction all represent coreWisconsin values of hard work and integrity, and we thinkit’s a winning combination both on the field and off.” “Many of us dreamed of playing on this field as kids, and
having the ability to help extend this stadium’s legacy is, inmany ways, the fulfillment of that dream,” said David G.Voss, Jr., president and CEO of Miron Construction. “Andwe’re proud to do so in partnership with other greatWisconsin companies, showcasing the true strength of theregion’s construction and fabrication industries.”
For more information, visit www.millerwelds.com.(This story also can be found on Construction
Equipment Guide’s Web site at www.constructionequip-mentguide.com.)
CEG Staff
Lambeau Field Expansion to Add EndZone Seats, High Definition Video Boards
A look at the south end zone expansion from its exte-rior.
LAMBEAU from page 10
Media Get Inclusive Look at New Cat Technologiesintroducing our new hydraulic hybrid
technology,” said Gray.The 336E H has all of the same powerful
advantages of the 336E with the biggest dif-ference between the two models havingeven greater fuel efficiency. To achieveadded fuel savings, the design of the 336E Huses three building block technologies that: 1) Conserve fuel with engine power man-
agement via the Cat electronic standardizedprogrammable (ESP) pump, which smooth-ly transitions between the hydraulic hybridpower sources, engine, and accumulator. 2) Optimize performance using restriction
management via the patented Cat adaptivecontrol system (ACS) valve, which intelli-gently manages restrictions and flows toseamlessly control machine motion with noloss of power, and to ensure operators expe-rience no difference in control, hydraulicpower or lift capability. 3) Reuse energy via the hydraulic hybrid
swing system, which captures the excava-tor’s upper structure swing brake energy inaccumulators, and then releases the energyduring swing acceleration.Customers can expect the 336E H to use
up to 25 percent less fuel compared to a stan-dard 336E, and up to 33 percent less fuel
than the 330/336D, said Caterpillar. All threeof the technology building blocks, conserve,optimize and reuse, are integrated together tomaximize fuel savings in a variety of appli-cations. Press demoed the 336E H, not on a prov-
ing ground, but as a 3D hologram. Testingand building Cat products includes creating3D machines and environments, as well as asuite of other productivity-enhancing tech-nologies. The hologram is displayed in aroom, called “The Cave.” The 3D glasseseven monitor head movement, and adjust theimage accordingly.
Cat c9.3 AcertCaterpillar also introduced the next gener-
ation of the Cat C9.3 Acert industrial engine,which is designed to meet U.S. EPA Tier IVFinal/EU Stage IV emission standards. Thenew engine is a six-cylinder, 9.3 L platformthat produces power density with ratingsfrom 300-400 hp (224-298kW). It isequipped with a fully-integrated clean emis-sion module (CEM), which includes a dieseloxidation catalyst (DOC), diesel particulatefilter (DPF), and selective catalytic reduction(SCR) technology. “Utilizing a Cat common rail fuel system
and new aftertreatment technology, the Tier
IV Final/EU Stage IV C9.3 Acert improvesfuel consumption by up to four percent com-pared to the current Tier IV Interim/StageIIIB model,” said Mike Reinhart, industrialpower systems marketing manager.The Clean Emission Module simplifies
OEM aftertreatment installation with a flex-ible design that allows mounting in horizon-
tal or vertical configurations. This allowsCat’s existing customers to easily transitionfrom Tier IV Interim/Stage IIIB to Tier IVFinal/Stage IV.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
CEG
Doug Mihelick, commercial manager of Caterpillar, uses a cutaway to show howTier IV technology works, and how easy the next step is for the company, since allthe technology that is used in Tier IV was introduced in Tier IV interim products.
PEORIA from page 14
ing needs of today’s contractor, and we are proud to providecompact equipment solutions that suit the needs of everycontractor,” said Clay Eubanks, president of Takeuchi US.“After an extensive review process, we selected Terex to
supply us with these new skid steer loaders ranging in oper-ating weight from 6,500 lbs. to 8,600 lbs. and rated operatingcapacity ranges from 1,500 lbs. to 3,000 lbs. We will supportour customer’s parts and service needs in the same way as wedo or other products today. The addition of the skid steerloader line adds to our full range of compact equipment,which includes compact track loaders, excavators and wheelloaders.”“This is a great opportunity to leverage our manufacturing
operations in Grand Rapids, Minnesota, and drive additionaloperational efficiencies through our whole production andsupply chain,” said Dean Barley, vice president and generalmanager, Terex Construction Americas and GlobalAftermarket. “We are proud to be recognized for our qualityand support, and pleased to assist in meeting the equipmentneeds of others in our industry.”For more information, call 706/693-3600 or visit
www.takeuchi-us.com.
Terex Acquires EightNew Takeuchi Mfg.Skid Steer Loaders
AGREEMENT from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 101
www.lyonauction.com corporate offices: Bridgeport, NY Phone: (315) 633-2944 • Fax: (315) 633-5635 www.lyonauctionlive.com
Sales Managers & Auctioneers, Inc.
ALEX
LYON & SON
SATURDAY, DEC. 8 @ 9:30 AM
NOTE: This sale will consist of late model rental machinesthat are in great shape and tip-top condition from several Catrental fleets.
HILITES INCLUDE: 2 MOTOR GRADERS: 2009 Cat 140MVHP, 2007 Leeboy 685B, 15
HYDRAULIC EXCAVATORS: 2011 Cat 336EL, 2009 Cat 336DL, 2008 Cat 330DL, (2) Cat 330CL,2008 Cat 320DLRR, 2010-(2) 2007 Cat 320DL, 2008 Cat 315DL, 2010 Cat 304CCR (584 hrs.), (3)2008 Cat 303CCR, 2007 Case CX330LC, 4 RUBBER TIRED LOADERS: 2011 Cat 980H, 2009 Cat938H HL, 2007 Cat 924H, 2011 Cat 906H (382hrs.), 9 CRAWLER TRACTORS: 2006 Cat D8T, CatD8R, 2011 Cat D6TXL, Unused 2012 Cat D6NXL, 2011 Cat D6NXL, (2) 2008 Cat D5KXL, (2) 2008Cat D3KXL, CRAWLER LOADER: 2012 Cat 953D, 5 TRACTOR LOADER BACKHOES: (2)2008 Cat 420EIT, 2011-2010-2008 Cat 416E (658-669-1067hrs.), FEED LOADERS:Athey Windroww/ 30in. Conveyor, 4 VIBRATORY ROLLERS: (2) 2008 Cat CS56, 2008 Cat CP56, 2010 Cat CS54,RUBBER TRACKED SKID STEER: 2011 Cat 289C, 6 SKID STEERS: (2) 2011 Cat 236B-3 (576& 339 hrs.), 2007 Cat 226B-2 (238hrs.), 2008 Cat 216B-2 (459 hrs.), 2007 NH L185, Case 1845C, 4
TELESCOPIC FORKLIFTS: 2009-2008 Cat TL1055, 2008 Cat TL943, 2008 Cat TL943, 9 BOOM
LIFTS: 2009 JLG S125J (4x4), (2) 2008 Genie Z80/60DSEL (4x4, 1018-787hrs.), (4) 2009 GenieZ60/34RTDS (4x4, 542-473-357-269hrs.), (2) 2008 Genie Z45/25RTDS (4x4, 824-722hrs.), 9 SCIS-
SOR LIFTS: 2008 Genie GS2646 (125hrs.), (2) 2008 Genie GS2032 (128-142hrs.), (6) 2008 GenieGS1530 (112-103-99-82-80-63hrs.), 16 LIGHT PLANTS: (10) 2011 Allmand Night Lite Pro (327-381-389-405-517-865-1475-1548-1755-1854hrs. ) - (6) 2010 (422-955-1081-1142-3175-8448hrs.), -2008 Allmand Night Lite Pro, 3 BROOM TRACTORS: (3) Massey Ferguson 283, UTILITY
TRUCKS: 2001 Chevy Silverado, BOOM TRUCK: 1995 Ford LT9000 w/ 10 ton National(s/a),SERVICE TRUCKS, 2 DETACHABLE GOOSENECK TRAILERS: 2003 Talbert 55 TonDropside (tri.), 1999 Rogers 50 ton (tri.), ATTACHMENTS: Excavators: New Fabtech 5500, NewFabtech 4800, Skid Steers: New 60in. -78in. Smooth- Stump- Rock - Mulch Buckets, New MountPlates, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New ForkFrames, New Fabtech 60in. Brush Cutters, New Fabtech Backhoe Attachments, New Fabtech 60in. -72in. Grapple Buckets, New Fabtech 66in. Root Grapples, New Fabtech 60in. Hay Spears, NewFabtech Stump Buckets, New Fabtech 428in. Forks & Frame, New Fabtech Quick Attach Plates, SUP-
PORT EQUIPMENT: New Ratchet Straps, New Impact Wrenches, New Diamond Blades, NewMustang Pumps, New Water Pumps, New Mustang Rebar Cutters, New Stiff Neck Pintle Hitches, NewPlatform Scales, New Hammer Drill, New Air Spray Gun Kits, New Mustang Concrete Vibrators, NewMustang Plate Compactors, New Demo Saws.
Address: 935 U.S. 23 North Delaware, OH 43015.
DIRECTIONS: From the North/South: take I-71 to Rte. 36 & US 37 Exit, proceed West on Rtes. 36 & 37for 9 miles to Delaware. Turn right on Rte. 23 North for 1.2 miles to the sale site. Entrance on left at theTravelodge. From the East/West: Take I-70 to I-270 bypass, proceed North on I-270 to I-71 to Exit for
Rtes. 36 & US 37 and proceed as noted above. NOTE: Auction Entrance is off of Rt. 23.
OHIO LICENSE #: 63199360809, OHIO AUCTIONEER LICENSE #: 62199360989
AUCTION
FRIDAY, DEC. 7 @ 10:00 AM
CAT RENTAL FLEET AUCTION!FEATURING LATE
MODEL CAT RENTALMACHINES
COLUMBUS,OHIO
(DELAWARE COUNTY FAIRGROUNDS),
EARLY HILITES: 2
DUMP TRUCKS: 1988Mack RD688 (quad.), 1979Mack DM685 (t/a), ATTACHMENTS: Skid Steers: Smooth,Snow & Mulch Buckets, 66in.- 78in. Buckets, New VersatechGrapple Buckets, New Versatech Hay Spears, New PalletForks, New Fork Frames, New Excalibur Thumbs, NewVersatech Brush Grapples, New Stump Buckets, New 4 PackRatchet Straps, New Impact Wrenches, New PremiumDiamond Blades, New Mustang Submersible Pumps, NewStiff Neck Pintle Hitches, New Huskie Hammer Drill, NewAir Spray Guns, New Mustang Concrete Vibrators, NewMustang Plate Compactors, New 5 Ton Digital PlatformScales.
OHIO LICENSE #: 63199360809, OHIO AUCTIONEER LICENSE #: 62199360989
JOB COMPLETIONCONSTRUCTION
EQUIPMENT, MACKDUMP TRUCKS,
TRUCK TRACTORS,PICKUPS, EQUIPMENT TRAILERS & SUPPORT EQUIPMENT
CLEVELAND,OHIO
AUCTION
Page 102 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
A E D ..........................................................................................................28ALEX LYON & SON INC
RACINE WI / DETROIT MI ..............................................................93CLEVELAND OH / COLUMBUS OH ............................................101
ALEX PARIS CONTRACTING CO INC ......................................................9ALLSTATE PETERBILT..............................................................................86ALLU GROUP ............................................................................................31AMERICAN STATE EQUIPMENT ..............................................................11ANACONDA CONVEYORS USA INC........................................................27ARING EQUIPMENT CO INC....................................................................19ASPEN EQUIPMENT ................................................................................47ATLAS COPCO ..........................................................................................56BANDIT INDUSTRIES INC ........................................................................65BARGAINS............................................................................................88,89BODINE......................................................................................................43BOSS PRODUCTS ....................................................................................48CAT AUCTION SERVICES ........................................................................95CEG SCALE MODELS ..............................................................................32CES ..........................................................................................................22CK POWER................................................................................................31CLASSIFIEDS ............................................................................................89CONSTRUCTION EQUIPMENT GUIDE
WANTED ..........................................................................................90TRAILER PROMO ............................................................................42TRIPLE PLAY....................................................................................96AUCTION RESULTS ........................................................................92
CUSTER PRODUCTS LTD........................................................................82DOOSAN INFRACORE AMERICA CORP ............................................52,53DOOSAN PORTABLE POWER ................................................................73DOPPSTADT..............................................................................................70DYNAPAC ..................................................................................................76ERB EQUIPMENT......................................................................................15EXODUS MACHINES ..........................................................................58,59FABCO EQUIPMENT INC............................................................................7FABICK CAT..........................................................................................13,62FARM-RITE EQUIPMENT INC ....................................................................8FELLING TRAILERS ............................................................................80,81FINKBINER EQUIPMENT CO....................................................................11FLANGE LOCK ..........................................................................................33FLUID CONTROL SERVICES ..................................................................26FREY & SONS ..........................................................................................98FURY MOTORS ........................................................................................85GARY CARLSON EQUIPMENT ................................................................12GRINDERCRUSHERSCREEN.COM ........................................................66GROVE WORLDWIDE ..............................................................................77HINIKER ....................................................................................................49HOWELL TRACTOR & EQUIPMENT CO ..........................................33,104HULLS 151 IMPLEMENT INC....................................................................29HYDRAULICIRCUIT TECHNOLOGY ........................................................43I-STATE TRUCK ........................................................................................85
ILLINOIS TRUCK & EQUIPMENT ..............................................................3IRAY AUCTION
FOLEY MN........................................................................................98IROCK CRUSHERS ..................................................................................66IRON PLANET ..........................................................................................99JEFF BELZERS CHEVROLET ............................................................83,85JJ SCHECKEL CORP ................................................................................31JOB RENTALS AND SALES LLC ..............................................................33JOHN DEERE ............................................................................................39KAWASAKI CONSTRUCTION MACHINERY ............................................75KOMATSU AMERICA CORP ................................................................40,41KUBOTA ....................................................................................................43LEADING EDGE ATTACHMENTS INC......................................................43M ADAMS EQUIPMENT CO......................................................................17MCALLISTER EQUIPMENT CO ................................................................69MCCANN INDUSTRIES INC........................................................................6METSO ......................................................................................................61MID COUNTRY MACHINERY....................................................................23MIDWEST VIBRO INC ..............................................................................26MORBARK INC ..........................................................................................70MUSTANG..................................................................................................72NORAM ......................................................................................................51PATTEN TRACTOR & EQUIPMENT CO ....................................................2POWERSCREEN CRUSHING & SCREENING ........................................57POWERSCREEN MW DEALER................................................................63PURPLE WAVE INC ..................................................................................97RDO EQUIPMENT/SCHARBER EQUIPMENT..........................................18REMU SCREENING TECHNOLOGY ........................................................66RITCHASON AUCTIONEERS
LEBANON TN ..................................................................................98RITCHIE BROS. AUCTIONEERS............................................................103ROAD BUILDERS MACHINERY ............................................................6,21ROGERS BROTHERS CORP ..................................................................35ROLAND MACHINERY INC ........................................................................5RUDD EQUIPMENT ..................................................................................25SANDVIK MINING & CONSTRUCTION ....................................................67SANY AMERICA INC ................................................................................35SARGENTS EQUIPMENT ........................................................................69SENNEBOGEN ..........................................................................................71SMITHCO ..................................................................................................86STAR EQUIPMENT LTD ..............................................................................6STONEBROOKE........................................................................................48SUPERIOR INDUSTRIES..........................................................................58TEREX CRANES ......................................................................................50TITAN RENTS ............................................................................................26TOWMASTER INC....................................................................................87VANDER HAAGS ......................................................................................86WILSON EQUIPMENT CO ........................................................................16WINTER EQUIPMENT CO ........................................................................46ZIPS TRUCK EQUIPMENT........................................................................82
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 10, 2012 • Page 103
6 UPCOMING AUCTIONSHouston, TX Wed-Thu, Nov 14-15
Fort Worth, TX Tue-Wed, Dec 4-5
Kansas City, MO Fri, Dec 7
Chicago, IL Wed, Dec 12
Minneapolis, MN Fri, Dec 14
St. Louis, MO Thu, Dec 20
1,990+ ITEMS INCLUDING: � Articulated Dump Trucks � Wheel Loaders � Motor Graders � Hydraulic Excavators � Loader Backhoes � Skid Steer Loaders � Compactors � Crawler Tractors
ADD YOUR EQUIPMENTPHONE 800.211.3983We are still accepting consignments for these auctions. Don’t miss out: call & take the hassle out of selling your equipment or trucks.
For complete and up-to-date equipment listings visit:
» rbauction.com
UNRESERVED PUBLIC AUCTION
HUGE SELECTION OF CONSTRUCTION EQUIPMENT
2007 JOHN DEERE 672D | HOUSTON, TX 2006 KOMATSU PC600LC-8 | HOUSTON, TX
KENWORTH CSSO w/MANITEX 38100S 38 TONFORT WORTH, TX
2004 INTERNATIONAL 7600 2000 GALLONKANSAS CITY, MO 2005 CATERPILLAR 740 6x6 | KANSAS CITY, MO
2007 KOMATSU D65EX-15EO LGP | FORT WORTH, TX 2008 KOMATSU WA380-6 GALEO | FORT WORTH, TX
2005 CATERPILLAR D6N LGP | HOUSTON, TX
2006 CATERPILLAR 330DL | FORT WORTH, TX
Page 104 • November 10, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE