Microstructure-sensitive modelling of deformation and fracture of … · 2018. 1. 19. ·...
19
Microstructure-sensitive modelling of deformation and fracture of TiAI alloys Mohammad Rizviul Kabir Experimental and Numerical Methods Institute of Materials Research German Aerospace Center Cologne, Germany Phone: +49 2203 601 2481 Email: Mohammad-ri zvi ul. kabir@d lr.de (BY .f!C.f!D) By Am 1 bUllon - llon-<:ommercial - No Deriv• liws pennft any comm„dal use « derlvatlvttof1 he Werkstoff-Kolloquium DLR Köln 05.12.2017
Transcript of Microstructure-sensitive modelling of deformation and fracture of … · 2018. 1. 19. ·...
-
Microstructure-sensitive modelling of deformation and fracture of TiAI alloys
Mohammad Rizviul Kabir
Experimental and Numerical Methods
Institute of Materials Research German Aerospace Center
Cologne, Germany Phone: +49 2203 601 2481 Email: Mohammad-rizvi [email protected]
(BY .f!C.f!D) By Am1bUllon - llon-
-
DLR.de • Chart2 »MR Kobir • Wf.Koll > S.12.2017
TiAI for turbine blade: Requirement and goal
/ ' Modelling for
microstructure-property correlations
Low pressure turbine blade
1.-----..>
Simulation Assisted Material
Engineering
DNeed for improvements in mechanical Properties:
OStrength at high temperature OCreep resistance ODuctility OFatigue strength OFracture toughness
D Can be improved by Microstructure optimization
-
DLR.de • Chart 3 »MR Kobir • Wf.Koll > S.12.2017
Outline: Modelling of TiAI alloy behaviour considering microstructure sensitivity
Three problem areas will be demonstrated
Modelling of deformation behaviour
Modelling of crack initiation and propagation
Modelling of dynamic fracture
-
Folie1Folie2Folie3Folie4Folie5Folie6Folie7Folie8Folie9Folie10Folie11Folie12Folie13Folie14Folie15Folie16Folie17Folie18Folie19
![Deformation and Fracture Mechanics of Engineering Material [RichardW.hertzberg]](https://static.fdocuments.net/doc/165x107/5695d03c1a28ab9b029195f8/deformation-and-fracture-mechanics-of-engineering-material-richardwhertzberg.jpg)
![DEFORMATION AND FRACTURE ANALYSIS OF COATING … · the architecture and microstructure, as is the case for multilay-ers [2,3], and nanocomposite coatings [4,5], characterized by](https://static.fdocuments.net/doc/165x107/5e309f9efe4d8746143faf78/deformation-and-fracture-analysis-of-coating-the-architecture-and-microstructure.jpg)
