Microlin Cooper Catalogue 2014

www.microlincooper.co.uk

M MICROLIN Cooper

Suppliers of High Performance

Industrial Safety Gloves

2

CONTENTS

Chemical gloves Page 3

Disposable gloves Page 4

Liner gloves Page 5

General gloves Page 6-9

High Visibility Thermal gloves Page 10-11

Water-Resistant Gloves Page 12

Cryogenic and Winter Gloves Page 13

Cut Resistant gloves (level 2-3) Page 14-16

Cut Resistant Level 4 Gloves Page 17

Cut Resistant Level 5 Gloves Page 18-20

Cut Resistant gloves (DMF free) 2

Cut Resistant sleeves Page 23

Waste and Puncture resistant gloves Page 24-25

Anti-vibration gloves Page 26

Needle Resistant gloves Page 27

Heat Resistant Gloves Page 28-29

Anti-static ESD gloves Page 30-31

3

CHEMICAL RESISTANT GLOVES

The BO700 glove is made with a 100% PVC formula to

provide excellent resistance to various chemicals and

solvents. It combines softness and flexibility for an

astonishing feeling of comfort.

The glove is non-powdered, yet still is easy to put on and

remove. It also has a patterned fingertip finish for

improved grip, and the PVC formula avoids latex

allergies.

Thanks to its anatomical shape, thinness and suppleness,

the glove is like a “second skin”, making it ideal for

precision work. Can be clean-room packed.

Approved food safe. Total length: 13 inches

1653 1 CE CAT 3

3000 CE CAT 3

G52

BO 700

The G52 is made with 100% PVC and comes with a

safety sleeve that covers the entire arm.

The glove is very thin, yet still protective for working

with chemicals and various substances. It is non

powdered to avoid allergies, but still easy to put on and

take off with comfort.

Approved food safe. Total length: 23.6 inches

EN 374 EN 374

3000

4

DISPOSABLE NITRILE GLOVES

These gloves are powder free, as to avoid

a powder residue when removed.

The nitrile material provides an excellent

grip in wet or slippery conditions, and

makes the glove very strong so they do not

rip and tear easily.

The low modulus formula makes the glove

stretchy, for comfort and ease of donning.

These gloves are resistant to many acids

and solvents, and are also approved for

use in food preparation.

PACKING:

- 100 Gloves Per Box / 10 Boxes Per Carton

- Available in sizes small (7) to XX-Large (11)

Peppermint Nitrile Gloves

Touch & Go Nitrile Gloves

Our Touch & Go gloves are our

economical range of nitrile disposable

gloves. They are also strong, stretchy

and powder free.

Approved food safe

5

LINER GLOVES

DEL 610 This product can be used on its own for delicate

applications, or as a liner glove for extra thermal

protection and comfort. It is knitted with Nylon,

and is ambidextrous and seamless. Excellent

sweat/moisture absorbency. Can be laundered

and re-used. Available in white and black

White: DEL 610 Black: DEL 611

112X

10 pairs Per Bag

- Available in sizes small (7) to XL(10)

CE CAT 1

DEL 612

This glove is a half-finger liner glove. The

tips are designed to prevent fraying. It is

knitted with Nylon, and is ambidextrous and

10 pairs Per Bag


CE CAT 1 112X

6

GENERAL GLOVES

RED DEVIL

This glove is made with a cotton liner and is fully

coated with a PVC coating. This makes the glove

water and grease proof. The glove is flexible and

comfortable, and is also seamless.

Min risk CE CAT 1

PICK & GO

Seamless five-finger knitted glove with a 4cm elasticised

cuff. The continuous fibre enables the glove to be lint

free, and suitable for class 100 cleanroom conditions. The

blue PVC dots on the palm and on the fingers enables

grip on slippery surfaces. The knitted polyester fibre

provides good ventilation to the hand, avoiding

clamminess. Excellent for employees in warehouses.

10 pairs Per Bag


FINGER PICKER

10 pairs Per Bag


A seamless half finger glove version of the Pick & Go

glove. The glove is black and has blue PVC dots for grip.

The glove is easy to put on and to remove. The ends of

the fingers are stitched to prevent fraying and laddering.

CE CAT 1

CE CAT 1

10 pairs Per Bag

- Available in sizes Large (9) to XL (10)

7

PU PALM COATED GLOVES

GLOVE MATERIAL COLOUR EN388:

DEL 500 Nylon White 4131

DEL 499 Polyester White 4131

DEL 220 Nylon Black 4141

DEL 219 Polyester Black 4131

DEL 200 Nylon Grey 4131

Our PU coated gloves come in

either nylon or polyester fabric,

and in three different colours.

The five-finger knitted gloves

have a fine PU coating on the

palm and on the fingers. These

gloves provide protection against

minor cuts and abrasions on the

palm and fingers and also avoid

leaving fingerprints on the

surface. The back of the glove

remains uncoated to provide

ventilation to the hand and

avoiding perspiration and

clamminess. A cost effective and

efficient working glove.

10 pairs Per Bag / 300 pairs per box

- Available in sizes x-small (6) to XXL

DEL 201 Polyester Grey 4131

8

GENERAL GLOVES

DEL 600

L 4001

This product can be used on its own

for delicate applications, or as a liner

glove for extra thermal protection and

comfort. It is knitted with Nylon, and is

ambidextrous and seamless.

Excellent sweat/moisture absorbency.

Can be laundered and re-used.

Available in white and black

112X

10 pairs Per Bag/ 300 pairs per box


CE CAT 2

13 gauge, seamless nylon glove liner with

a black latex coating on the palm. These

gloves provide protection against minor

cuts and abrasions on the palm and

fingers and also prevents fingerprint

marks on surfaces.

3121

10 pairs Per Bag

- Available in sizes small (7) to XL(10) CE CAT 2

9

NITRILE PALM COATED GLOVES

DEL 501

DEL 503

DEL 501 BLACK

Light-weight nitrile coated glove.

Uncoated on the back to keep hands

cool when working.

Offers excellent protection to the user

with a high abrasion level. The nitrile

coating offers a good grip on oily

surfaces.

DEL 501: white glove with grey palm

DEL 501 B: white glove with black palm

DEL 503: black glove with black palm

4121

10 pairs Per Bag/ 120 Per Box


10

GRIP GLOVES

ORANGE GRIP

GRANITE GREY Cotton glove for building and

construction work, and for

handling concrete and bricks. Has

a crinkled grey latex coating on

the palm and fingers. Also good

for cold warehouses

2143

10 pairs Per Bag/300 pairs per box


Orange cotton glove for building

and construction work, and for

handling concrete and bricks. Has

a crinkled orange latex coating on

the palm and fingers. Suitable for

outdoor and indoor use.

4143



11

HIGH VISIBILITY THERMAL GLOVES

ARTIX

NEON 7 High visibility, seven gauge, fluorescent cotton

yellow liner, with a blue high-grip latex coating

on the palm. Provides user with grip and

warmth. Excellent for those cold winter months!

2242

- Available in sizes med (8) to XL(10)

CE CAT 2

NEON 10 High visibility, ten gauge, fluorescent cotton

yellow liner, with a black high-grip latex coating

on the palm. Good thermal protection for mild

to cold weather.

2242



CE CAT 2

Excellent glove for thermal protection in very

chilly environments.

2242



CE CAT 2 X2X

22X

12

WATERPROOF THERMO

WATER-RESISTANT GLOVES

2131 CE CAT 2

Available in sizes Small (7) to XL(10)

WONDERGRIP AQUA This glove incorporates a 13-gauge nylon liner

and is fully coated with latex on the front and

back of the hand. It proves excellent grip in

wet and dry conditions. Excellent dexterity,

flexibility and comfort are retained.

12 Pairs per bag/ 144 per case

2221 CE CAT 2

- Available in sizes Small 7) to XL(10)

The Waterpoof Thermo glove is made with

brush piled acrylic for thermal properties, and

coated to make it fully waterproof on the

palm and on the back of the hand. It is high

visibility, making this the perfect outdoor

work glove.

01X

13

CRYOGENIC GLOVES

2122 CE CAT 2

- Available in sizes Large (9) to XXL(11)

221

This glove is made using Porelle®

membrane alongside water-repellent, full

grain leather. The coating is waterproof

and breathable. The glove is made with a

wrist grip and a tightening strap.

Length: 40cm plus 15cm split leather cuff

PHULAX WINTER

CRYO LEATHER

4111 CE CAT 2

- Available in sizes Large (9) to XL(10)

The Phulax winter is a fully waterproof

glove. It is made of nitrile with a fluffy

inner liner to keep hands warm when

working in cold environments. This glove

is also chemical resistant.

14

CUT RESISTANT GLOVES - CUT LEVEL 2-3

TEK 548 A cut level 2 glove. This glove is a very

comfortable, uncoated, and tight fitting for

sensitivity and ‘feel’. Made from 100% ultra-high

molecular weight polyethylene fibre.

Suitable for areas such as glass handling,

recycling, sheet metal work, cutting applications,

bottling and canning. Also when handling small

very sharp components that are part of the

manufacturing process. Gives protection whilst

retaining sensitivity.

324 X



CE CAT 2

TEK 547 A cut Level 3 glove. This is a white glove with

white silica dots to provide excellent grip on

slippery surfaces, as well as cut resistance. The

sophisticated knitted fabric keeps the hand cool

to avoid clamminess.

234 X



CE CAT 2

15

CUT RESISTANT GLOVES - CUT LEVEL 3

TEK 549-1 TEK 549-2

A cut level 3 glove. These gloves are made from a white ultra-high

molecular weight polyethylene fibre with a PU coating, making

them cut level 3 standard. They are strong and exceptionally

tactile. The back is uncoated for ventilation and flexibility.

4342


- Available in sizes small (7) to XXL(11)

CE CAT 2

TEK 549-1: White glove

with a white PU coating

TEK 549-2: White glove

with a grey PU coating

16


TEK 549-8

TEK 549-3

Our economic value cut level 3 glove. Also

resistant to sharp edges, ideal for glass

handling. High abrasion levels, making it

strong and long lasting. Black PU coating on

palm and around fingers.


- Available in sizes small (7) to XL(10) 4343 CE CAT 2

-A cut level 3 glove this is a grey glove with a

grey polyurethane coating. The PU is reduced

by 3 microns to increase sensitivity and

comfort, whilst still retaining the cut level 3

property.


Available in sizes small (7) to XL(10) 3341 CE CAT 2

17


TEK 1000

Cut level 4, with Super Sensitivity. Very

lightweight glove with a strong cut resistant

and fibreglass mix, and a grey PU coating on

the palm and fingers. This gives the high cut

resistance combined with the excellent

sensitivity


- Available in sizes x-small (6) to XXL4442 CE CAT 2

TEK 1001 - Half finger

Cut level 4, Super Sensitivity, half finger for

better control. Like the TEK 1000, but the

fingertips of the thumb, index finger, and

middle finger have been removed for ease of

handling small or fiddly objects. Edges have


- Available in sizes small (7) to XL(10) 4442 CE CAT 2

CE CAT 2

TEK 1001 - Half finger

CE CAT 2

18


CORTEZ

A cut level 5 glove. Has a black rough

polyurethane coating, for better grip on

slippery surfaces. Resistant to water

and oils. A good, economic, high cut

resistant glove.

4543


- Available in sizes Small (7) to XL(10)

CE CAT 2

TEK 2000

A cut level 5 glove, with a crinkled latex

coating. This coating gives superb grip for

the user. The glove is dexterous and

comfortable to work with, Can be used in

wet or dry applications.

354X CE CAT



19


PROTECTA PLUS

A cut level 5 glove, but feels like you’re

wearing a cut level 3! This glove is

highly dexterous, which provides the

user with excellent sensitivity. It is also

coated with PU on the palm for grip.

4543


- Available in sizes x-small (6) to XXXL(12)

CE CAT 2

SaFOOD Designed for comfort, dexterity and

protection, the glove is made from a unique

yarn construction using high strength cut

resistant fibres and stainless steel fibres,

giving a very high cut index level.

354X - Available in sizes small (7) to XL(10) CE CAT 2

20


GLADIATOR LEATHER

TEK 530

A leather coated anti-cut level 5 glove.

Excellent for working with oils and

other liquids.

The leather also prevents leaving marks

when handing surfaces, such as glass.

4543


CE CAT 2

Cut level 5 glove, with heat resistance.

Made with Kevlar, also contains

ExtraFlex technology. Can resist

temperatures of up to 80°C. The

ExtraFlex feature makes the glove

more comfortable and flexible.

3531



CE CAT 2 X1XX4X

21


F5X

TEK 5000

4543 CE CAT 2

The TEK 5000 is our economical cut level

5 glove. It is made with a high cut

resistant fibre with a Natural Latex

coating provides excellent grip for the

palm and finger tips in a number of

different applications

4543 CE CAT 2

The F5X is an excellent cut level 5 glove. It

is black all over, with a black PU coated

palm. The glove provides the user with

excellent fit and comfort, without

subsidising on protection. Snug fitting

design provides dexterity during delicate

applications whilst also being comfortable

to wear and use.



22

CUT RESISTANT GLOVES - DMF FREE

CRYSTAL

CNF 500

FULLY COATED

This is a highly dexterous glove with a cut

level 5 index. It is manufactured with a black

foam latex coating on the palm and on the

fingers. This is a comfortable glove that gives

very good grip and resistance to blades and

punctures. The coating is DMF free.

4544


- Available in sizes small (7) to XXL(11)

A cut level 5 glove, which is fully coated with

crinkled rubber. This glove is completely water

proof. The coating also gives a very good grip, and

is flexible and comfortable.

3544

10 pairs Per Bag


CE CAT 2

CE CAT 2

23

CUT RESISTANT SLEEVES

OXFORD SLEEVE

PRIMA CUFF 45

This sleeve is 55cm long, and is a cut level

5. Long enough to protect the whole arm.

It is made of 100% Protecta fibre, for

excellent cut resistance, dexterity and

comfort. Protects the palm, with the

fingers exposed for better handling.

4543 CE CAT 2

A 45cm long sleeve, with a cut resistance

level 4. Very light to wear, with an

elasticated band on the top to prevent the

sleeve from slipping down. The whole

sleeve is stretchy to fit most forearms.

Comes with or without a thumbhole. Also

available in 35cm length.

144X CE CAT 2

24

PUNCTURE RESISTANT GLOVES

RIPEUR 1

LOGGER GLOVE

This glove is manufactured with treated leather. The

back has a blue nitrile cover, to give better dexterity.

The leather is treated for resistant to water, oils and

grease. Ideal for handling debris and general waste, and

has good resistance to needles and syringes. The lining

is made with a heavy weight high performance

polyethylene fibre, interwoven with a very fine stainless

steel thread; giving superb resistance to cut and wear.

Also has a 7cm cuff to protect the wrists.

4544

5 pairs Per Bag

- Available in sizes medium(8) to XL(10)

CE CAT 2

This glove is to provide protection when using

chain saws, and for forestry and wood-cutting

work. It is made with breathable, water-repellent

leather. It comes with a protective polycarbonate

shell on the left hand, and leather reinforcement

on the right hand.

3122

- Available in sizes medium(8) to XXL(11)

25

PUNCTURE RESISTANT GLOVES

RIPEUR 2

AEROFLEX 291

This glove is manufactured with 100% treated leather. The

leather is treated for resistant to water, oils and grease. Ideal

for handling debris and general waste, and has good resistance

to needles and syringe. This glove has a very high cut index

level. It has a 7cm cuff to protect the wrists.

4544

5 pairs Per Bag


CE CAT 2

This version of the Ripeur 2 glove has an excellent economic

value. Gives excellent all-over protection to the hand.

4544

5 pairs Per Bag


CE CAT 2

ARMOUR 2

An anti-puncture glove level 4, with a cut level 2, and

excellent dexterity. Ideal for protection of wood and

metal splinters. Nitrile coating makes the glove water

resistant and protects the nail varnish, anti-needle coating

underneath.

4244

10 pairs Per Bag

- Available in sizes small7) to XL(10)

CE CAT 2

26

ANTI –VIBRATION GLOVES

ANTI-VIBE

ANTI VIBE ½ FINGER

A low cost, 5 finger, cotton and polyamide mix

knit glove. Has a black chloroprene absorbent

coating on the palm and fingers for protection

against shock and vibration.

* Also available in Kevlar for additional cut

resistant properties and strength.

X243 CE CAT 2

ENISO 10819:

1996 Vibration & Shock tests:

TRM= 0.77 -_ TRH= 0.57

5 pairs Per Bag

- Available in sizes large (9) to XL(10)

As described above, but with a half finger finish.

This is to make it easier for the user to easily use

the small buttons on the machinery being used,

without having to remove the glove entirely.

X243 CE CAT 2

ENISO 10819:

1996 Vibration & Shock tests:

TRM= 0.77 -_ TRH= 0.57

5 pairs Per Bag


27

NEEDLE RESISTANT GLOVES

SEARCHLITE

ANTI-NEEDLE 3

This glove is similar to the Searchlite, but fully

coated to give protection from needles to the

entire hand. The glove is made with a safety strap

to further protect the wrists.

3544 CE CAT 2

Sold in pairs


Giving excellent protection against needles, with a

cut level 5 index. Glove is lined with SharkSkin

material, giving the user protection against

needles, nails, splinters, glass etc. SharkSkin also

allows for flexibility, sensitivity and comfort. Back

of hand uncoated for added flexibility and comfort

3544 CE CAT 2

Sold in pairs


28

HEAT RESISTANT GLOVES

SILVER - RADIANT HEAT

SANDOU

Ideal gauntlet for handling small hot parts in a very hot atmosphere ( 400°C) and offering good protection against contact heat ( 300°C) The glove is manufactured in split cowhide leather with fire retardant treatment, the thickness 1 .4 mm, and the back having an aluminized lining called PREOX® , The Inside lining is based of wool /cotton (360g/m2) Total length : 40cm

4144 CE CAT 2 413243

A gauntlet that will help workers handle items at

around 500°C.

The Sandou is a five finger glove made with a

terry cloth KEVLAR®(550 gr/m2) material on

the palm . The back of the glove and safety cuff

are manufactured from split cowhide leather.

Thickness :1.2mm. and 100% inside cotton

lining (320 gr/m2). The whole glove is stitched

with Kevlar thread.

4244 CE CAT 2 44 XXXX

29

HEAT RESISTANT GLOVES

B7VERD

HOT GLOVE

This mitt gives resistance to contact heat, fire and flames to 800°C. Made with Mitt Verosta fabric, fully lined three-components (glass, aramid, Proban). The seams are executed by stainless steel for optimal strength. The thumb is reinforced by a special ring Verosta. Length: 40cm including 15cm cuff The glove is ideal for handling hot parts up to 800°C including glass, steel, foundries and so on.

2X4X 44XXXX

This is an excellent glove for ovens and handling hot pots and pans. It provides protection up to 350°C. The outer layer is made with Nomex and Kevlar. The inner layer is 100% cotton. It has a silica criss-cross pattern on the front of the glove for extra grip.

144X 423X2X

30

ANTI STATIC ESD GLOVES

MK4001

MK3001

These cost effective anti-static gloves were developed

specifically to eliminate damage to delicate

microelectronic components caused by ESD and

particulate contamination

Maximum protection from static build-up and

contamination—ideal for Class 2 ESD-sensitive

devices (>=1000 volts). The palm and the back of the

hand is manufactured using a breathable polyester

yarn. These gloves do not contain ammonium

chloride nor silicon substances. Upon request, these

gloves can be packaged under cleanroom conditions.

Length: 12inches

10 pairs Per Bag

This is a liner ESD glove. It has a Fourchette style

fingers and inset thumb for enhanced fit and comfort.

It is clean and lightweight, and suitable for minimum

risks only.

Length: 9inches

10 pairs Per Bag

31

ANTI STATIC ESD GLOVES

This is a nylon glove with a polyurethane coating on the fingertips. It has very good dissipative properties and is an ideal and economical glove.

DEL 300

This is a nylon glove with a polyurethane coating on the palm and on the fingers. It has very good dissipative properties and is an ideal and economical glove.

DEL 320

10 pairs Per Bag

10 pairs Per Bag

DEL 310

10 pairs Per Bag

This is a nylon ESD glove which is uncoated. This is ideal for sensitive applications. It has very good dissipative properties and is an ideal and economical glove.

32

M MICROLIN Cooper

Microlin Cooper Catalogue 2014

Documents

Transcript of Microlin Cooper Catalogue 2014