MICROBIAL, ORGANIC,

ORGANOMINERAL FERTILIZER

www.bmusa.com.tr

Next Generation Technology in Agriculture!

BMUSA

BMUSA Banana Waste Recycling Plant, with indoor area of 1900 m2 on 17 acres of land, was established with the valuable contributions of Alanya Municipality and the grant support provided by Antalya Provincial Directorate of Food, Agriculture and Livestock. The main purpose of the plant is to produce solid and liquid, organic and microbial fertilizers from banana tree trunks and branches after the fruit has been consumed. Banana is widely consumed in Turkey.

Capacity of the Plant: 2736 tons / year Solid Fertilizer, 7056 tons / year Liquid Fertilizer.

Total Investment Cost: 10 million TL / 2018

PRODUCTION PROCESS• The equipment used in the production processof BMusa microbial fertilizers was designed by engineers considering the latest technological developments.

• Hygiene and biological safety are always a priorityduring production.

• Products carefully produced in our fully equippedmicrobiology laboratory are made under control of our microbiology specialists for all processes starting from the first stage of production.

• Liquid bacteria carrier used in microbial fertilizers(habitat of bacteria in the fertilizer) is a special formula that protects bacteria until the use of fertilizer.

• The main component - banana stem juice - isproduced from banana stems which are considered waste. During production process, after going through technological and sterilization processes in our banana stem juice plant, all wild bacteria, fungal diseases, parasites and so on are purified.

• All these processes increase efficiency, quality andshelf life of fertilizers.

www.bmusa.com.tr

BMUSA01

OUR FACILITY WAS ESTABLISHED WITH THE SUPPORT OF THE MINISTRY OF AGRICULTURE

AND FORESTRY

Above all we should not forget that soil is not an infinite

resource. From this perspective we should strive for its

sustainable use not only for plant nutrition and higher

productivity, but to preserve the soil

M I C R O B I A L FERTILIZER(Organic Fertilizer Containing Bacteria)

Bacteria used in BMusa microbial fertilizers were isolated from TURKISH TERRITORY and fertilizer formulae were designed with support of advisor teachers.

BMusa microbial fertilizers contain no synthetic, chemical and genetically modified organisms.

BMusa microbial fertilizers, fix nitrogen (N) in the atmosphere and dissolve phosphorus (P) in the soil. This reduces the use of chemicals.

BMusa microbial fertilizers transform micro and macro elements in soil such as IRON, MANGANESE, ZINC, COPPER existing in the soil but not absorbed by the plants, into forms easily consumed by the plants.

BMusa microbial fertilizers can be applied to all kinds of plants and trees, soil and soilless agriculture, organic agriculture, greenhouses, fields.

BMUSA03

VALUE YOUR FUTURE!Choice of smart farmers

Next Generation Technology in Agriculture!

Helps reduce use of chemical

fertilizers containing

nitrogen and phosphor up to

%40!

It is produced from soil bacteria isolated from Turkey.

Resistance against hot and cold stress and decrease heating and watering expenses!

IBA hormone produced by the bacteria

provides natural growth!

Helps reduce use of

agricultural chemicals

and provides integrated

protection!

BMUSA VİTA MICROBIAL FERTILIZER

GUARANTEED CONTENTSBacillus megaterium RC3D Bacillus subtilis RC521 Pseudomonas fluorescens RC512 Number of living organisms :1x107 kob/ml – pH 6-7

BENEFITS• Fixes the nitrogen in the atmosphere and dissolves thephosphate in the soil.

• Helps plant growth and increases yield and quality.

•Suppresses harmful bacteria in the soil. Strengthens immunityagainst bacterial and fungal diseases in plants.

• It protects the plant by wrapping the leaves of the plantlike a thin layer.

• Reduces the use of chemical fertilizers.

• Extends the shelf life of the product.

Fermentation Method

Implementation of multiplying bacteria in the product. Fermentation is carried out as follows: 1 liter of product is mixed with 100 liters of well water and 1 kg of sugar and applied for at least 8 hours.

Product Application

Seed Application:

The seeds are immersed in the product or the solution prepared by fermentation method. The seeds are dried in the shade for at least 8 hours without exposure to sunlight.

Seedling or nursery application:

Seedling roots are immersed in the product or the solution prepared by fermentation method. The remaining bacterial solution in the tank can be diluted enough for all trees and given 1-2 liters per tree.

Direct soil application:

Solution prepared by fermentation method is sprayed onto soil surface by a low pressure pulverizer or given directly to the roots by lower or upper irrigation systems. This method is particularly recommended.

Foliar Application

Should be applied at night when the plant stomas are open. Do not apply in cool and windy weather.

BMUSA GREENMICROBIAL FERTILIZER

GUARANTEED CONTENTS Bacillus megaterium RC07 Pantoea agglomerans RC58 Pseudomonas fluorescens RC77 Number of living organisms : 1x107 kob/ml – pH 6-7

Bacteria isolates in BMusa Microbial Fertilizers are chosen carefully from areas of Turkey inhabited by culture and wild plants and tested as necessary. Bacteria in BMusa Microbial Fertilizers are isolates capable of fixing nitrogen and dissolving phosphate. They create a colony in the roots of the plants and transform the nitrogen in atmosphere into ammonia fixing it. They produce different organic acids thus dissolving phosphates putting it into form easily consumed by the plant.

In addition, they facilitate the intake of iron, dissolve calcium and produce Phyto pheromones. Thus, it promotes growth in plants and reduces the negative effects of stress and especially water and temperature stress. These beneficial microorganisms mix with the soil create colony and suppress harmful soil-borne bacteria. Thus, they help plants grow healthier.

BMUSA05BMUSA 04

BENEFITS

• Fixes the nitrogen in the atmosphere and dissolves thephosphate in the soil.

• Reduces the negative effects of stress and especially waterand temperature stress.

• It is effective in arid and semi-arid regions. It is also effectivein areas with limited irrigation, low pH or acidic conditions.

• Strengthens immunity against bacterial and fungal diseases inplants.

• Provides economical fertilization.

• Helps soil rehabilitation by splitting chemicals accumulated insoil.

• Provides early harvesting.

• Reduces the use of chemical fertilizers.

• ANTIOXIDANT

• ENZYMES

• AMINOACIDS are produced.

• ANTIBIOTIC

• VITAMINS

• GROWTH HORMONE are produced.

It regulates the pH of the water and soil in alkaline and calcareous soils and transfers the macro and micronutrients in the soil to the plant

Regulates the Turgor pressure, eases transmission bundles, reduces phytotoxicity in the plant. Regulates development of vegetative and generative components.

APPLICATION METHOD

PLANT TYPE

Tomato, Pepper, Cucumber, Eggplant

Greenhouse, open area vegetables

Melon, Watermelon, Pumpkin etc.

Fruits

Bitter orange, Banana, Olive

Industrial Crops, Oilseed Crops,cotton, sunflower, corn etc.

Into irrigation water before and after planting 1lt/da

Into irrigation water before and after planting 1lt/da

Along with the planting 1- 1,5 lt/da for a decare

Apply 2 lt / da with drip or irrigation water after flowering.

Apply 2 lt / da with drip or irrigation water.

2 lt / da to drip or irrigation water along with the planting

Application time and dose

BMUSA ANTI SALTORGANIC ACID COMPLEX

BMusa AntiSalt, which is produced as Organic Acid Complex, converts the lime in soil to calcium that can be absorbed by the plant and lowers the PH of limewater. Calcium foliar fertilizer is not needed.

In soils with drip or release irrigation, due to continuous and unconscious use of fertilizer or different reasons there occurs an accumulation of salt and lime. In these cases, it is very difficult for the plants to get nutrients from the soil or it does not occur at all. It helps the iron, zinc and phosphorus to be absorbed by the plant. BMusa Anti-Salt must be applied to the soil before fertilization in order to ensure the solubility of the plant nutrients present in the soil and to obtain the desired result from the fertilizers given to the soil in the best way possible.

Turns lime in water and soil into calcium that can be absorbed by the plant and lowers the pH of limewater.

www.bmusa.com.tr www.bmusa.com.tr

BMUSA07BMUSA 06

BMUSA ANTI SALTORGANIC ACID COMPLEX

BMUSA 08

www.bmusa.com.tr

BMUSA09

Scope of use Foliar Application Soil Applicationa

Vegetables (eggplant, pepper, tomato)

Citrus trees

Fruit Trees (apple, pear etc.)

Field Crops

Vineyard

Sunflower, Corn, Cotton, Canola

Strawberry

Banana

Melon, Watermelon, Pumpkin

Add 250-300 ml product to 100 lt water and apply 2 weeks after planting. Repeat 3-4 times once in every 20 days.

Add 300 ml product to 100 lt water, apply after the fruit set, repeat 3-4 times once in every 20 days.

Add 300 ml product to 100 lt water, apply after the fruit set, repeat 3-4 times once in every 20 days.

Add 250-300 ml product to 100 lt water, apply 2 times after planting when the plant height reaches 15 cm.

Add 250 ml product to 100 lt water, apply 2 times after formation of leaves until unripe grapes.

Add 300 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times once in every 20 days.

Add 250 ml product to 100 lt water, apply 2-3 times once in every 20 days.

Add 300 ml dosage, apply 2-3 times after the fruit set once in every 20 days.

Add 250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times once in every 20 days.

Start to apply along with the planting 2 lt/da. Repeat 2-3 times once in every 15-25 days.

Apply with 15-25 days intervals starting from the flower period with 2-3 lt /da dose.

Apply with 15-25 days intervals starting from the flower period with 2-3 lt /da dose.

Apply 2 lt/da dose with every irrigation.

Apply 2 times after formation of leaves I 1,5-2 lt/da dose.

Apply 2 times with 20days intervals with 2-3 lt /da dose.

Apply 2 times once in every 20 days in 2 lt/da dose after leaves formation..

Apply 2-3 times once in every 20 days in 3 lt/da dose after the fruit set.

Apply 3 times once in every 20 days in 2 lt/da dose after formation of 3-5 leaves.

BMUSA MULTI PLUSPLANT BASEDLIQUID ORGANIC FERTILIZERGUARANTEED CONTENT W/WTotal Organic Matter % 20Organic Carbon % 8Total (N) % 2Water Soluble K20 % 2pH 5-7

It helps the plant to feed effectively with its dense organic matter and carbon, and its ingredients stimulate the bacteria in BMusa microbial fertilizer that produce İBA hormone and accelerate root development. With its high organic content, it increases fertility of the soil by eliminating negative factors caused by use of synthetic fertilizer. BMusa Multi Plus should be used to maintain natural structure of soil and increase yield.LIQUID ORGANIC

FERTILIZER WITH AMINO ACID

Increases protein production in plants. Combines vitamins and microelements Increases coenzyme and apoenzyme formation.Accelerates root growth and flower formation.Protects the plant against frost, alleviates frost damage.

BMUSA MULTILIQUID ORGANIC FERTILIZERWITH PLANT BASED AMINOACIDSGUARANTEED CONTENT W/WOrganic Matter %30Organic Carbon %15Organic Nitrogen %2Free Aminoacid %6Water soluble Potassium Oxide (K2O) %2pH 5,5-7,5

Vegetables (eggplant, pepper, tomato)

Citrus trees

Fruit Trees (apple, pear etc.)

Field Crops

Vineyard

Sunflower, Corn, Cotton, Canola

Strawberry

Banana

Melon, Watermelon, Pumpkin

Add 250-300 ml product to 100 lt water and apply 2 weeks after planting. Repeat 3-4 times once in every 20 days.

Add 300 ml product to 100 lt water, apply after the fruit set, repeat 3-4 times once in every 20 days.

Add 300 ml product to 100 lt water, apply after the fruit set, repeat 3-4 times once in every 20 days.

Add 250-300 ml product to 100 lt water, apply 2 times after planting when the plant height reaches 15 cm.

Add 250 ml product to 100 lt water, apply 2 times after formation of leaves until unripe grapes.

Add 300 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times once in every 20 days.

Add 250 ml product to 100 lt water, apply 2-3 times once in every 20 days.

Add 300 ml dosage, apply 2-3 times after the fruit set once in every 20 days.

Add 250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times once in every 20 days.

Apply 2 lt/da 2 weeks after planting. Repeat 2-3 times once in every 15-25 days.

Apply 2-3 lt/da once in every 25 days starting from the flower period.

Apply 2-3 lt/da once in every 25 days starting from the flower period.

Apply 2 lt/da dose with every irrigation.

Apply 2 times after formation of leaves I 1,5-2 lt/da dose.

Apply 2 times with 20days intervals with 2-3 lt /da dose.

Apply 2 times once in every 20 days in 2 lt/da dose after leaves formation..

Apply 2-3 times once in every 20 days in 3 lt/da dose after the fruit set.

Apply 3 times once in every 20 days in 2 lt/da dose after formation of 3-5 leaves.

This product is purely plant based and enriches soil structure due to its high organic matter content. Provides rapid capillary root excretion in seedlings. Promotes vegetative development of the plant. Ensures uniform and homogen distribution between the seeds. Soil and foliar application provide desired tissue hardness in plant and fruit. Extends quality and shelf life of fruits.

ORGANOMINERALFERTILIZERS

www.bmusa.com.tr

BMUSA 10

ORGANOMINERAL FERTILIZERSBMusa Organomineral Fertilizers are fertilizers are made by bringing together and blending organic components and mineral nutrients. The soil healing properties of organic substances and the benefits of minerals are utilized by combining them into a single fertilizer. The use of organomineral fertilizers is very important in terms of soil fertility, plant health and yield. BMusa Organomineral fertilizers create nitrogen, potassium and phosphorus needed for a plant. In addition, plant nutrient minerals such as zinc, boron and manganese are also available in the form appropriate for the plant (all EDTA chelated). Due to all these, the products grown are completely natural and do not contain any hormonal threat.

BMusa Ferti with NK containing Nitrogen, Potassium; BMusa Root with NPK containing Nitrogen, Phosphorus, Potassium, Amino Acid, Boron, Manganese, Zinc are organomineral fertilizers.

Can be used in agriculture, organic farming, greenhouses, fields in all conditions.

Organomineral Fertilizers’ Benefits

• Improves soil structure and soil quality.

• Loosens clay soils.

• Helps protect the plant against droughtthanks to its ability to retain water in soil.

• Prevents soil erosion by increasing organicmaterials in soil.

• Speeds up root development of the plant andlets soil breathe.

• Supports the growth and fruiting of the plantand increases the quality of the fruit.

• Protects the plant by binding heavy metalsand toxic residues in soil and prevents it from being affected by harmful substances.

• Regulates soil Ph level.

• Supports root development and greatlyimproves nutrient absorption due to developed roots.

• Helps nutrient absorption of the plant.

• Speeds up and increases germination ofseeds.

• Reduces harmful remains of toxic materials.

BMUSA FERTILIQUID ORGANOMINERAL FERTILIZER WITH NK

GUARANTEED CONTENT W/WOrganic Matter %15Total Nitrogen %5Organic Nitrogen %1Urea Nitrogen (NH2 - N) %4Water soluble Potassium Oxide (K2O) %10Free Aminoacid %2Maximum Chloriner %2pH 5,5-7,5

Vegetables (eggplant, pepper,

tomato)

Citrus trees

Fruit Trees (apple, pear etc.)

Field Crops

Vineyard

Sunflower, Corn, Cotton, Canola

Strawberry

Banana

Melon, Watermelon, Pumpkin

Add 250 ml product to 100 lt water and apply 2 weeks after planting. Repeat 3 times once in every 20 days.

Add 300 ml product to 100 lt water, apply after the fruit set, repeat 3 times once in every 20 days.

Add 300 ml product to 100 lt water, apply after the fruit set, repeat 3 times once in every 20 days.

Add 250 ml product to 100 lt water, apply 2 times after planting when the plant height reaches 15 cm.

Add 250 ml product to 100 lt water, apply 2 times after formation of leaves until unripe grapes.

Add 300 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times once in every 20 days.

Add 250 ml product to 100 lt water, apply after planting 2-3 times once in every 20 days.

Add 300 ml dosage, apply 2-3 times after the fruit set once in every 20 days.

Add 250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times once in every 20 days.

Apply 2 lt/da 2 weeks after planting. Repeat 2-3 times once in every 20-25 days.

Apply 2 lt/da once in every 25 days starting from the flower period.

Apply 2 lt/da once in every 25 days starting from the flower period.

Apply 1 lt/da dose with every irrigation.

Apply 2 times after formation of leaves I 1,5-2 lt/da dose.

Apply 2 times with 20 days intervals with 2-3 lt /da dose.

Apply 2 times once in every 20 days in 1 lt/da dose after leaves formation.

Apply 2-3 times once in every 20 days in 2 lt/da dose after the fruit

Apply 3 times once in every 20 days in 2 lt/da dose after formation of 3-5 leaves.

BMUSA 12 BMUSA13

Scope of use Foliar Application Soil Applicationa

Vegetables (eggplant,pepper, tomato)

Citrus trees

Fruit Trees (apple, pear etc.)

Field Crops

Vineyard

Cotton, Canola

Sunflower, Corn,

Strawberry

Banana

Melon, Watermelon, Pumpkin

Add 250 ml product to 100 lt water and apply 2 weeks after planting. Repeat 3 times once in every 20 days.

Add 300 ml product to 100 lt water, apply after the fruit set, repeat 3 times once in every 20 days.

Add 300 ml product to 100 lt water, apply after the fruit set, repeat 3 times once in every 20 days.

Add 250 ml product to 100 lt water, apply 2 times after planting when the plant height reaches 15 cm.

Add 250 ml product to 100 lt water, apply 2 times after formation of leaves until unripe grapes.

Add 300 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times once in every 20 days.

Add 300 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times once in every 20 days.

Add 250 ml product to 100 lt water, apply after planting 2-3 times once in every 20 days.

Add 300 ml dosage, apply 2-3 times after the fruit set once in every 20 days.

Add 250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times once in every 20 days.

Apply 2 lt/da 2 weeks after planting. Repeat 2-3 times once in every 20-25 days.

Apply 2-3 lt/da once in every 25 days starting from the flower period.

Apply 2-3 lt/da once in every 25 days starting from the flower period.

Apply 2 times after formation of leaves I 1,5-2 lt/da dose.

Apply 2 times with 20days intervals with 2-3 lt /da dose.

Apply 2 times once in every 20 days in 1 lt/da dose after leaves formation

Apply 2-3 times once in every 20 days in 2 lt/da dose after the fruit set.

Apply 3 times once in every 20 days in 2 lt/da dose after formation of 3-5 leaves.

BMUSA ROOTLIQUID ORGANOMINERAL FERTILIZER WITH NPK

GARANTİ EDİLEN İÇERİK W/WOrganic Matter %15Total Nitrogen %5Organic Nitrogen %1Urea Nitrogen (NH2 - N) %2Ammonium Nitrogen (NH2 - N) %2Total Phosphor Pentaoxide (P2 - O5 ) %11Water soluble Pentaoxide (P2 - O5 ) %11Water soluble Potassium Oxide (K2O) %4Free Aminoacid %3Water soluble Boron (B) %0,04 Water soluble Mangan (Mn) Total EDTA Chelate %0,03 Water soluble Zinc (Zn) Total EDTA Chelate %0,04 Maximum Chlorine %2pH 5,5-7,5

BMUSA 14 BMUSA17

MICRO ELEMENTS

Microelements increase enzyme activity and play

an active role in protein and carbohydrate production.

Enzymes cannot work in the absence of activator.

Carbohydrate and protein production cannot take

place.

www.bmusa.com.tr

BMUSA15

Scope of use Foliar Application Soil Applicationa

BMUSA MIXTRACE ELEMENT ADDEDLIQUID ORGANOMINERAL FERTILIZERGUARANTEED CONTENT W/WTotal Organic Matter % 8Total (humic+fulvic) acid % 2Water soluble Iron (Fe) % 0.2Water soluble Mangan (Mn) % 3.7Water soluble Molibden (Mo) % 0.007Water soluble Zinc (Zn) % 0.5pH 7-9

A magnificent combination of organomineral fertilizer and trace elements. In addition, humic and fulvic acid increases soil bacterial activity. When it is poured onto the soil, it makes the soil color darker due to its dark color and thus provides early heating of the soil and provides a period of earliness or a longer development period during the year.

Vegetables (eggplant, pepper, tomato etc.) Greenhouse plants

Citrus trees

Fruit Trees

Field Crops Cereals, grains, industrial plants

Vineyard

Cotton, Canola

Sunflower, Corn

Strawberry

Banana

Melon, Watermelon

Olive, walnut

Beet, Carrot, Potato

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15-20 cm.

Add 200-300 ml to 100 lt water, apply 2-3 times with 20-day intervals after the fruit set.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals after the fruit set.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15cm.

Add 200 ml product to 100 lt water, apply 2-3 times after formation of leaves and unripe grapes.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15-20 cm.

Add 250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times with 20-day intervals.

Add 200 ml to 100 lt water, apply 2-3 times with 20-day intervals after the planting.

Add 200 ml to 100 lt water, apply with 15-day intervals before and after the flowering.

Add 200 ml to 100 lt water, apply 2 times after formation of 3-5 leaves.

Add 200 ml to 100 lt water, apply 2-3 times with 20-day intervals after flower set and leave formation.

Add 100-200 ml to 100 lt water, apply 2-3 times with 15-20-day intervals.

Apply 2 times with 20-day intervals 1-2 lt /da dose after flowering period.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose after the fruit set.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose after unripe grapes.

Apply with 15-day intervals 1 lt /da dose.

Apply 2 times with 20-day intervals 1-2 lt /da dose after formation of leaves.

Apply 2 times with 20-day intervals 2 lt /da dose.

Apply 2-3 times with 20-day intervals 1,5 lt /da dose.

Apply 2-3 times 1-2 lt /da dose after formation of leaves.

Apply with 15-day intervals 1 lt /da dose.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose.

Apply 2-3 times with 20-day intervals 2 lt /da dose after the fruit set.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose.

BMUSA17

BMUSA ZincZnTRACE ELEMENT ADDEDORGANOMINERAL FERTILIZER

A liquid organomineral fertilizer with trace element added, containing plenty of zinc. Zinc plays an important role in membrane function, photosynthesis, protein synthesis and Phyto hormone synthesis of a plant. It also protects the plant against seedling viability, sugar formation, disease and abiotic stress factors (e.g. drought).

GUARANTEED CONTENT W/WTotal Organic Matter % 15Total (humic+fulvic) acid % 2Water soluble Boron (B) % 0.1Water soluble Zinc (Zn) %4.5pH 7-9

BMUSA 16

Vegetables (eggplant, pepper, tomato etc.) Greenhouse plants

Citrus trees

Fruit Trees

Field Crops Cereals, grains, industrial plants

Vineyard

Cotton, Canola

Sunflower, Corn

Strawberry

Banana

Melon, Watermelon

Olive, walnut

Beet, Carrot, Potato

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15-20 cm.

Add 200-300 ml to 100 lt water, apply 2-3 times with 20-day intervals after the fruit set.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals after the fruit set.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15cm.

Add 200 ml product to 100 lt water, apply 2-3 times after formation of leaves and unripe grapes.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15-20 cm.

Add 250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times with 20-day intervals.

Add 200 ml to 100 lt water, apply 2-3 times with 20-day intervals after the planting.

Add 200 ml to 100 lt water, apply with 15-day intervals before and after the flowering.

Add 200 ml to 100 lt water, apply 2 times after formation of 3-5 leaves.

Add 200 ml to 100 lt water, apply 2-3 times with 20-day intervals after flower set and leave formation.

Add 100-200 ml to 100 lt water, apply 2-3 times with 15-20-day intervals.

Apply 2 times with 20-day intervals 1-2 lt /da dose after flowering period.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose after the fruit set.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose after unripe grapes.

Apply with 15-day intervals 1 lt /da dose.

Apply 2 times with 20-day intervals 1-2 lt /da dose after formation of leaves.

Apply 2 times with 20-day intervals 2 lt /da dose.

Apply 2-3 times with 20-day intervals 1,5 lt /da dose.

Apply 2-3 times 1-2 lt /da dose after formation of leaves.

Apply with 15-day intervals 1 lt /da dose.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose.

Apply 2-3 times with 20-day intervals 2 lt /da dose after the fruit set.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose.

Scope of use Foliar Application Soil Applicationa Scope of use Foliar Application Soil Applicationa

BMUSA Zn8Fertilizer Solution with Zinc(contains Zinc Sulphate)GUARANTEED CONTENT W/WWater soluble Zinc (Zn) % 8pH 5.5-7.5

Plants generally intake zinc as a divalent ion Zn² +. Zinc controls the output of oxygen radicals that cause poisoning. It is involved in the structure of various enzymes and activates a large number of enzymes. It plays a role in carbohydrate, protein and auxin metabolism. The chlorophyll content of plants decreases remarkably due to zinc deficiency. The most prominent symptom of zinc deficiency in plants is dwarfism. While the veins in the leaves retain their green color, the color between the veins turn to light green, yellow and even white. Due to zinc deficiency the roots grow relatively bigger and root secretion increases.

BMUSA 18

BMUSA IRON FeIRON CHELATE (Fe-EDTA)

GUARANTEED CONTENT W/WWater soluble Iron (Fe) % 5Chelated Iron with EDTA (Fe) % 5

BMusa Iron Fe: Since iron is not transferred from old leaves to young leaves, plants have to take iron continuously from the environment in which they develop. Since Fe² + iron is used in plant metabolism, the plant receives Fe2 + ion or reduced iron in this way. The amount of iron useful to the plant in soil solution is generally very small. It plays an important role in protein synthesis.

The most typical feature of iron deficiency is that even the thinnest veins in the leaves remain green and the color between the veins turns completely yellow.

BMUSA19

Vegetables (eggplant, pepper, tomato etc.)

Greenhouse plants

Citrus trees

Fruit Trees

Field Crops Cereals, grains, industrial plants

Vineyard

Cotton, Canola

Sunflower, Corn

Strawberry

Banana

Olive, Hazelnut, Walnut

Apply 200 ml dose 2-3 times with 20-day intervals after the flowering.

Add 200 ml to 100 lt water, apply 2-3 times with 20-day intervals.

Add 250 ml to 100 lt water, apply 2-3 times with 20-day intervals after the fruit set.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15 cm.

Add 250 ml to 100 lt water, apply 2 times with 20-day intervals after formation of leaves.

Add 200-300 ml to 100 lt water, apply 2 times with 20-day intervals when the plant height reaches 15-20 cm.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15-20 cm.

Add 200 ml to 100 lt water, apply 2-3 times with 20-day intervals after formation of leaves.

Apply 200 ml dose 3 times with 15-day intervals before the flowering period.

Add 300 ml to 100 lt water, apply 2 times with 20-day intervals after formation of leaves.

Apply 2-3 times with 20-day intervals 1lt /da dose.

Apply 2-3 times with 20-day intervals 1lt /da dose.

Apply 2-3 times with 20-day intervals 1lt /da dose.

Apply with 15-day intervals 1 lt /da dose.

Apply 2 times with 20-day intervals 1-2 lt /da dose after unripe grapes.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose after the planting.

Apply with 15-day intervals 1 lt /da dose before and after the flowering.

Apply 2-3 times with 20-day intervals 1,5 lt /da dose after the fruit set.

Vegetables (eggplant, pepper,

tomato etc.) Greenhouse plants

Citrus trees

Fruit Trees

Field Crops Cereals, grains, industrial plants

Vineyard

Cotton, Canola

Sunflower, Corn

Strawberry

Banana

Melon, Watermelon

Olive, walnut

Beet, Carrot, Potato

Add 250 ml to 100 lt water, apply 2-3 times with 20-day intervals after the planting.

Add 150-200 ml to 100 lt water, apply 3 times with 20-25-day intervals after the fruit set.

Add 150 ml to 100 lt water, apply 2-3 times with 20-day intervals.

Add 150-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15-20 cm.

Add 100-200 ml product to 100 lt water, apply 2-3 times with 20-day intervals after unripe grapes.

Add 150-250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times with 20-25-day intervals.

Add 200-250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times with 20-day intervals.

Add 150-200 ml to 100 lt water, apply 2-3 times with 20-day intervals after the planting.

Add 200 ml to 100 lt water, apply with 15-day intervals after the flowering.

Add 100-150 ml to 100 lt water, apply 2-3 times with 20-day intervals.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals after flower set and leave formation.

Add 100-200 ml to 100 lt water, apply 2-3 times with 15-day intervals.

Apply 2-3 times with 20-day intervals 1 lt /da dose after the planting.

Apply 2-3 times with 25-day intervals 1 lt /da dose after the fruit set.

Apply with 25-day intervals 1 lt /da dose after flowering period.

Apply with 15-day intervals 1-2 lt /da dose.

Apply 2 times with 20-day intervals 1-1,5 lt /da dose after formation of leaves.

Apply 2 times with 20-day intervals 1-1,5 lt /da dose.

Apply 2-3 times with 20-day intervals 1-1,5 lt /da dose.

Apply 2-3 times 1 lt /da dose after formation of leaves.

Apply with 15-day intervals 1 lt /da dose.

Apply with 20-day intervals 1 lt /da dose after formation of 3-5 leaves.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose after the fruit set.

Apply 2-3 times with 20-day intervals 0,5-1 lt /da dose.

Scope of use Foliar Application Soil Applicationa Scope of use Foliar Application Soil Applicationa

BMUSA CALCIUM CaCalcium Chloride Solution

Plants intake calcium as Ca² + ion. Calcium, which is present in the plant, has an important role in strengthening the cell walls and plant tissues. Calcium in the cell wall protects plant tissues and fruits against bacterial and fungal infections. Calcium affects root growth and cell division in plants. It also protects plant tissues from the stress of freezing and thawing. The characteristic symptom of calcium deficiency in plants is the regression of growth in meristematic tissue. In the absence of sufficient calcium, fruits ripen prematurely.

GUARANTEED CONTENT W/WWater soluble Calcium Oxide (Ca0) % 12Chlorine (Cl) % 14pH 5-7

BMUSA COMBILIQUID MICRO PLANT NUTRIENTELEMENTS MIXGUARANTEED CONTENT W/WWater soluble Boron (B) % 0.1Water soluble Iron (Fe) % 0.5Water soluble Mangan (Mn) % 4.5Water soluble Molibden (Mo) % 0.007Water soluble Zinc (Zn) % 1.5pH 4.5-6.3

Boron is effective in the formation of sugar and carbohydrates, transport and placement of calcium, cell division. It promotes the formation of hormones. Manganese (Mn) performs important tasks such as electron transfer in photosynthesis and elimination of toxic effects of oxygen-free radicals. Molybdenum (Mo) is effective in the uptake and use of nitrogen by plants. It has the functions of reducing nitrate to nitrogen (nitrogen) and stabilizing nitrogen in plants. It is also

Scope of use Foliar Application Soil Application

Add 200 ml to 100 lt water, apply 2 times with 20-day intervals when the plant height reaches 15-20 cm.

Add 200-300 ml to 100 lt water, apply 2 times with 25-day intervals after the fruit set.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals after the fruit set.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15cm.

Add 150-200 ml product to 100 lt water, apply 2 times with 20-day intervals after formation of leaves.

Add 200 ml to 100 lt water, apply 2-3 times with 20-day intervals.

Add 250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times with 20-day intervals.

Add 200 ml to 100 lt water, apply 2-3 times with 20-day intervals after the planting.

Add 200 ml to 100 lt water, apply with 15-day intervals before and after the flowering.

Add 200 ml to 100 lt water, apply 2 times after formation of 3-5 leaves.

Add 250 ml to 100 lt water, apply 2-3 times with 20-day intervals after flower set and leave formation.

Add 100-200 ml to 100 lt water, apply 2-3 times with 15-20-day intervals.

Apply 2 times with 20-day intervals 1-2 lt /da dose after flowering period.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose after the fruit set.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose after unripe grapes.

Apply with 15-day intervals 1 lt /da dose.

Apply 2 times with 20-day intervals 1-2 lt /da dose after formation of leaves.

Apply 2 times with 20-day intervals 2 lt /da dose.

Apply 2-3 times with 20-day intervals 1,5 lt /da dose.

Apply 2-3 times 1-2 lt /da dose after formation of leaves.

Apply with 15-day intervals 1 lt /da dose.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose.

Apply 2-3 times with 20-day intervals 2 lt /da dose after the fruit set.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose.

BMUSA 20 BMUSA21

Vegetables (eggplant, pepper,

tomato etc.) Greenhouse plants

Citrus trees

Fruit Trees

Field Crops Cereals, grains, industrial plants

Vineyard

Cotton, Canola

Sunflower, Corn

Strawberry

Banana

Melon, Watermelon

Olive, walnut

Beet, Carrot, Potato

Vegetables (eggplant, pepper,

tomato etc.) Greenhouse plants

Citrus trees

Fruit Trees

Field Crops Cereals, grains, industrial plants

Vineyard

Cotton, Canola

Sunflower, Corn

Strawberry

Banana

Melon, Watermelon

Olive, walnut

Beet, Carrot, Potato

Add 250 ml to 100 lt water, apply 2-3 times with 20-day intervals after the planting.

Add 150-200 ml to 100 lt water, apply 3 times with 20-25-day intervals after the fruit set.

Add 150 ml to 100 lt water, apply 2-3 times with 20-day intervals.

Add 150-250 ml to 100 lt water, apply 2-3 times with 20-day intervals when the plant height reaches 15-20 cm.

Add 100-200 ml product to 100 lt water, apply 2-3 times with 20-day intervals after unripe grapes.

Add 150-250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times with 20-25-day intervals.

Add 200-250 ml product to 100 lt water, apply after formation of 3-5 leaves, repeat 2-3 times with 20-day intervals.

Add 150-200 ml to 100 lt water, apply 2-3 times with 20-day intervals after the planting.

Add 200 ml to 100 lt water, apply with 15-day intervals after the flowering.

Add 100-150 ml to 100 lt water, apply 2-3 times with 20-day intervals.

Add 200-250 ml to 100 lt water, apply 2-3 times with 20-day intervals after flower set and leave formation.

Add 100-200 ml to 100 lt water, apply 2-3 times with 15-day intervals.

Apply 2-3 times with 20-day intervals 1 lt /da dose after the planting.

Apply 2-3 times with 25-day intervals 1 lt /da dose after the fruit set.

Apply with 25-day intervals 1 lt /da dose after flowering period.

Apply with 15-day intervals 1-2 lt /da dose.

Apply 2 times with 20-day intervals 1-1,5 lt /da dose after formation of leaves.

Apply 2 times with 20-day intervals 1-1,5 lt /da dose.

Apply 2-3 times with 20-day intervals 1-1,5 lt /da dose.

Apply 2-3 times 1 lt /da dose after formation of leaves.

Apply with 15-day intervals 1 lt /da dose.

Apply with 20-day intervals 1 lt /da dose after formation of 3-5 leaves.

Apply 2-3 times with 20-day intervals 1-2 lt /da dose after the fruit set.

Apply 2-3 times with 20-day intervals 0,5-1 lt /da dose.

Scope of use Foliar Application Soil Application

PRODUCTION FACILITYUgrak quarter. Merkez str. No:88 Alanya / ANTALYA / TURKEY

Tel: +90 242 227 27 83 / Fax: +90 242 227 27 91E-Mail: info@bmusa.com.tr

www.bmusa.com.tr

MAIN OFFICEYenigun quarter. 1054 str. İnci Plaza, Building No:15 Office No:27 Kat:3

Muratpaşa / ANTALYA / TURKEY Tel : +90 242 227 27 83

E-Mail : info@bmusa.com.trwww.bmusa.com.tr

Affiliate company.

is an