Micro Switch MANU - Cesco.com

Micro Switch Cat. No. Description Net Price

l GSCA03S1 Safety hinge switch, 1-N.O. and 1-N.C., rightside hinge metal

$71.74

l GSCA03S3 Safety hinge switch, 1-N.O. and 1-N.C., leftside hinge metal

71.74

l GSDA03S1 Safety hinge switch, 1-N.O. and 1-N.C., rightside hinge plastic

60.94

l GSDA03S3 Safety hinge switch, 1-N.O. and 1-N.C., rightside hinge plastic

60.94

l GSEA44S1 Safety hinge switch, 2-N.O. and 2-N.C., rightside hinge

105.38

l GSEA44S3 Safety hinge switch, 2-N.O. and 2-N.C., leftside hinge

105.38

TYPE “BZ/B A” STANDARD BASIC SWITCHESThis section covers over 100 of our most popular BZ/BA type Series cataloguelistings. If you don’t find what you’re looking for, it’s likely one of the approxi-mately 1800 other active listings will meet your needs. UL Recognized. CSAApproved. Call Electro Sonic for your ordering information.

TYPE BZ, AND WA STANDARD BASIC SWITCHES, SOLDER TERMINALS

Cat. No. Recommended ForOperatingForce (oz.)

OvertravelMin. Inches

NetPrice

PIN PLUNGER—SPDT 15 AMPS, 125, 250, 240 VAC CONTACTSBZ-RX Manual reset

(maintained contact)applications, solderterminal

7-9, 2-10* .005, .015* $18.36

PIN PLUNGER—SPST-NC 20 AMPS, 125, 250, 277 VAC CONTACTSl WA-1RX-A4 Manual reset SPST-NC,

A4 terminals20, 25* .010 17.23

*Reset characteristics.

MANU

CODE

289

BZ/BM TYPE SEALED TYPE BA/BE TYPE

BZ/BM SEALED BA/BE

TYPE BZ, BA, WZ, YZ, BM AND BE STANDARD BASIC SWITCHES, SCREWTERMINAL



NetPrice

PIN PLUNGER—SPDT 1 AMPS, 125 VAC CONTACTSl BZ-2R72-A2 Applications requiring

gold alloy contacts9-13 .005 $12.84

PIN PLUNGER—SPDT 1 AMPS, 125 VAC CONTACTSl BZ-2R725551-A2 Gold alloy contacts

dustproof and splashresistant seal

8-15 .005 17.43

PIN PLUNGER—SPDT 5 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2R244-A2 Operating in temp. to

+400˚F (204˚C) for100 hours

9-13 .005 14.44

PIN PLUNGER—SPDT 10 AMPS, 125, 250, 480 VAC CONTACTSl BZ-R21-A2 Lower force 4 .005 14.80

PIN PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2R-A2 Most applications SPDT 9-13 .005 8.92

PIN PLUNGER—SPST 15 AMPS, 125, 250, 480 VAC CONTACTSl WZ-2R-A2 SPST (normally closed) 9-13 .005 10.37

TYPE BZ, BA, WZ, YZ, BM AND BE STANDARD BASIC SWITCHES, SCREWTERMINAL



NetPrice

PIN PLUNGER—SPST 15 AMPS, 125, 250, 480 VAC CONTACTSl YZ-2R-A2 SPST (normally open) 9-13 .005 $8.05l BZ-R-A2 Less differential travel 7-9 .005 10.21l BZ-2R24-A2 Operating in temp. to

+125˚F (121˚C)9-13 .005 11.04

l BZ-2RT04 MIL-S-8805 applicationrequirement(8805/1-004)

9-13 .005 11.35

l BZ-2R5551-A2 Dustproof and splashresistant seal

9-15 .005 12.28

l BZ-2R55-A2-S Best service for sealedconstruction. Stainlesssteel internal snapspring

9-15 .005 20.58

PIN PLUNGER—SPDT 20 AMPS, 125, 250, 480 VAC CONTACTSl BA-2R-A2 Up to 20 amp load

handling14-22 .010 11.40

l BA-2R24-A2 Operating intemperature to +250˚F(121˚C)

14-22 .010 14.24

PIN PLUNGER—SPDT 22 AMPS, 125, 250, 480 VAC CONTACTSl BM-1R-A2 Up to 22 amp load

handling7-10 .005 11.81

PIN PLUNGER—SPDT 25 AMPS, 125, 250, 480 VAC CONTACTSl BE-2R-A4 Up to 25 amp load

handling14-22 .010 10.21

TYPE BZ, BM STANDARD BASIC SWITCHES, SCREW TERMINALS



NetPrice

OVERTRAVEL PLUNGER—SPDT 1 AMPS, 125 VAC CONTACTSl BZ-2RD72-A2 Applications requiring


OVERTRAVEL PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RD-A2 Added overtravel. For

manual operation andslow 20˚ (max) cam rise

9-13 .060 11.50

l BZ-2RD24-A2 Operating intemperature to +250˚F(121˚C)

9-13 .060 17.23

522 PARTS INDICATED WITH A LEAF lARE CONSIDERED RoHS JULY 2006 COMPLIANTBASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE T AXES NOT INCLUDED

DUSTPROOF ANDSPLASH RESISTANT

DUSTPROOF ANDSPLASH RESISTANT

TYPE BZ, BA, AND BE STANDARD BASIC SWITCHES, SCREW TERMINALS



NetPrice

OVERTRAVEL PLUNGER—SPDT 1 AMPS, 125 VAC CONTACTSl BZ-2RDS725551-A2 Applications requiring

gold alloy contactsplus dustproof andsplash resistant seal

13-19 .060 $39.67

OVERTRAVEL PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RDS5551-A2 Dustproof and splash

resistant seal13-19 .060 26.46

OVERTRAVEL PLUNGER—SPDT 20 AMPS, 125, 250, 480 VAC CONTACTSl BA-2RB-A2 Up to 20 amp load

handling14-22 .094 11.76

OVERTRAVEL PLUNGER—SPDT 25 AMPS, 125, 250, 480 VAC CONTACTSl BE-2RB-A4 Up to 25 amp load

handling14-22 .094 14.39

TYPE BZ, BA AND BM STANDARD BASIC SWITCHES, SCREW TERMINALS



NetPrice

OVERTRAVEL PLUNGER—SPDT 1 AMPS, 125 VAC CONTACTSl BZ-2RS72-A2 Applications requiring


OVERTRAVEL PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RS-A2 Added overtravel. For

in-line operation andwith JR auxiliaryactuators

9-13 .060 12.48

BZ-RSX Manual reset solderterminals

7-9 .025 23.93

OVERTRAVEL PLUNGER—SPDT 22 AMPS, 125, 250, 480 VAC CONTACTSl BM-1RS-A2 Up to 22 amp load

Handling7-10 .060 15.68

Micro Switch MANU

CODE

289

TYPE BZ STANDARD BASIC SWITCHES, SCREW TERMINALS



NetPrice

OVERTRAVEL PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RS5551-A2 Dustproof and splash

resistant seal9-15 .060 $16.71




NetPrice

OVERTRAVEL PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RQ-A2 Added overtravel. For manual

in-line operation and forslow 30˚ (max) rise cams

9-13 .219 $16.82

l BZ-2RQ24-A2 Operating in temperatureto ±250˚F (121˚C)

9-13 .219 24.50

BA TYPE

BATHREADED BUSHINGS ARE 15/32-32NS

BZ/BM TYPE

BZ/BM

TYPE BZ, BA, AND BM STANDARD BASIC SWITCHES, SCREW TERMINALS

Cat. No. Recommended For

OperatingForce(oz.)

OvertravelMin.

InchesNet

Price

OVERTRAVEL PLUNGER—SPDT 1 AMPS, 125 VAC CONTACTSl BZ-2RQ172-A2 Applications requiring


OVERTRAVEL PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RQ1-A2 BZ-2RQ-A2 type

applications with panelmount

9-13 .219 18.67

l BZ-2RQ1T04 MIL-S-8805 applicationrequirements(M8805/1-020)

9-13 .219 23.99

l BZ-2RQ124-A2 Operating intemperature to ±250˚F(121˚C)

9-13 .219 25.53

l BZ-2RN702 Furnished withunassembled seal boot

9-13 .125 30.18

BZ-RQ1X Manual reset. Solder terminals 6-9.5 .219 38.94OVERTRAVEL PLUNGER—SPDT 20 AMPS, 125, 250, 480 VAC CONTACTS

l BA-2RQ1-A2 Up to 20 amp loadhandling

14-22 .219 19.75

OVERTRAVEL PLUNGER—SPDT 22 AMPS, 125, 250, 480 VAC CONTACTSl BM-1RQ1-A2 Up to 22 amp load

handling7-10 .219 25.07

523PARTS INDICATED WITH A LEAF lARE CONSIDERED RoHS JULY 2006 COMPLIANTBASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE T AXES NOT INCLUDED

Micro Switch MANU

CODE

289

BZ-2RQ181-A2

BZ-24Q181-A2THREADED BUSHINGS ARE 15/32-32 NS

TYPE BZ, BM, STANDARD BASIC SWITCHES, SCREW TERMINALS

Cat. No.Recommended

ForOperatingForce (oz.)


NetPrice

OVERTRAVEL PLUNGER—SPDT 1 AMPS, 125 VAC CONTACTSl BZ-2RQ1872-A2 Applications requiring


OVERTRAVEL PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RQ18-A2 Added overtravel.

Roller plunger for rapidcam (30˚ max) rise andslide operation. Panelmount

9-13 .140 31.98

l BZ-2RQ1824-A2 Operating intemperature to ±250˚F(121˚C)

9-13 .140 46.58

OVERTRAVEL PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2AQ18T1 Double-break circuitry 14-24 .141 54.78

OVERTRAVEL PLUNGER—SPDT 22 AMPS, 125, 250, 480 VAC CONTACTSl BM-1RQ18-A2 Up to 22 amp load

handling7-10 .140 42.86

OVERTRAVEL PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RQ181-A2 Applications requiring

roller plunger 90˚ tomajor axis of switch

9-13 .140 31.98

BA

BZ-2RM-A2

BZ/BM

ADJUSTABLE

TYPE BZ, BA, BM, AND BE STANDARD BASIC SWITCHES, SCREWTERMINALS



NetPrice

STRAIGHT LEVER—SPDT 1 AMPS, 125 VAC CONTACTSl BZ-2RW8072-A2 Applications requiring

gold alloy contacts2.5 .219 $16.09

l BZ-2RW80722555105-A2 Best stability undervarying humidity.Gold alloy contactswith seal

2.5 .219 24.91

STRAIGHT LEVER—SPDT 5 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RW8244-A2 Operating in temp. to

+400˚F (204˚C) for100 hours

2.5 .219 17.95

STRAIGHT LEVER—SPDT 10 AMPS, 125, 250, 480 VAC CONTACTSl BZ-RW8435-A2 Lowest operating

force (withoutexternal returnspring)

.25 .219 15.58

STRAIGHT LEVER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RW876T 1.25 inch lever

requirements6 .141 12.84

l BZ-2RW80-A2 2.5 inch leverrequirements

2.5 .219 11.04

l BZ-2RW84-A2 Lower force (withoutexternal returnspring)

1 .219 11.04

l BZ-2RW805551-A2 Dustproof and splashresistant seal

2.5 .219 14.91

l BZ-2RWT04 MIL-S-8805applicationrequirements(M8805/1-044)

1-3.25 .172 14.80

l BZ-2RW824-A2 Operating intemperature to+250˚F (121˚C)

2.5 .219 13.77

BZ-RW80X Manual reset. Solderterminals

2.25 .219 18.98

l BZ-2RW863-A2 6 inch leverrequirements

1 .500 12.17

STRAIGHT LEVER—SPDT 20 AMPS, 125, 250, 480 VAC CONTACTSl BA-2RV-A2 Up to 20 amp load

handling2.5 .078 14.24

STRAIGHT LEVER—SPDT 25 AMPS, 125, 250, 480 VAC CONTACTSl BE-2RV-A4 Up to 25 amp load

handling2.5 .078 15.53

STRIAGHT LEVER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RW899-A2 Adjustable operation

point (17mm to22mm) .670˝ to.880˝

2.5 .125 15.47

l BZ-2RM-A2 Reverse actingactuator (switchplunger depressed infree position

6 .219 14.80

BA TYPE

ADJUSTABLE

BZ/BM TYPE

BZ-2RM-A2


Micro Switch MANU

CODE

289




NetPrice

SIMULATED ROLLER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2RW80147-A2 1.05 inch (26.7mm)

(simulated roller)lever applications

6 .094 $14.18

l BZ-2RW80196-A2 1.90 inch (48.3mm)(simulated roller)lever applications

3.5 .156 16.09

BA/BE TYPE

BZ-2RW826-A2BZ-2RW825-A2

BA/BE TYPE

BZ/BM TYPE

BZ-RW922-A2

BZ/BM TYPE

BZ-RW922-A2

BZ/BM TYPE BA/BE TYPE ADJUSTABLE

BA/BE TYPEBZ/BM TYPE

ADJUSTABLE

TYPE BZ, BA, BM AND BE STANDARD BASIC SWITCHES, SCREWTERMINALS



NetPrice

ROLLER LEVEL—SPDT 1 AMPS, 125 V AC CONTACTSl BZ-2RW82272-A2 Applications requiring

gold alloy contacts6 .094 $17.23

l BZ-2RW822725551-A2 Applications requiringgold alloy contacts plusdustproof and splashresistant seal

6 .094 23.31

TYPE BZ, BA, BM AND BE STANDARD BASIC SWITCHES, SCREWTERMINALS



NetPrice

ROLLER LEVER—SPDT 15 AMPS, 125, 250, 480 V AC CONTACTSl BZ-2RW822-A2 1.05 inch (26.7mm)

(steel roller) leverapplications

6 .094 $13.77

l BZ-2RW8222-A2 Roller turned 90˚ 2.5-6.5 .141 max. 17.74l BZ-2RW82224-A2 Operating in temperature

to +250˚F (121˚C)6 .094 20.12


6 .094 18.62

l BZ-2RW82255-A2-S Best service for sealedconstruction. Stainlesssteel internal snap spring

6 .094 27.55

ROLLER LEVER—SPDT 20 AMPS, 125, 250, 480 V AC CONTACTSl BA-2RV22-A2 Up to 20 amp load

handling6 .030 15.27

ROLLER LEVER—SPDT 22 AMPS, 125, 250, 480 V AC CONTACTSl BM-1RW822-A2 Up to 22 amp load


ROLLER LEVER-SPDT 25 AMPS, 125, 250, 480 V AC CONTACTSl BE-2RV22-A4 Up to 25 amp load

handling18.67

ROLLER LEVER—SPDT 15 AMPS, 125, 250, 480 V AC CONTACTSl BZ-2RW82299-A2 Adjustable operating

point. Roller lever 1.05inch (26.7mm)

6 .040 17.95

l BZ-2RW8299-A2 Adjustable operatingpoint. Roller lever 1.90inch (48.3mm)

3.5 .085 20.12

Contin ued on ne xt pa ge....


Micro Switch TYPE BZ, BA, BM AND BE STANDARD BASIC SWITCHES, SCREWTERMINALS



NetPrice

ROLLER LEVER—SPDT 1 AMPS, 125 V AC CONTACTSl BZ-2RW82725551-A2 Applications requiring

gold alloy contacts, plusdustproof, and splashresistant seal

3.5 .156 $27.18

ROLLER LEVER—SPDT 15 AMPS, 125, 250, 480 V AC CONTACTSl BZ-2RW82-A2 1.90 inch (48.3mm)

(steel roller) leverapplications

3.5 .156 13.77


3.5 .156 21.66

ROLLER LEVER—SPDT 20 AMPS, 125, 250, 480 V AC CONTACTSl BA-2RV2-A2 Up to 20 amp load

handling3.5 .060 16.25

ROLLER LEVER—SPDT 22 AMPS, 125, 250, 480 V AC CONTACTSl BM-1RW82-A2 Upt to 22 amp load

handling3.5 .156 18.52

ROLLER LEVER—SPDT 25 AMPS, 125, 250, 480 V AC CONTACTSl BE-2RV2-A4 Up to 25 amp load

handling3.5 .060 18.67

ROLLER LEVER—SPDT 10 AMPS, 125, 250, 480 V AC CONTACTSl BZ-RW922-A2 Best repeatability and

O.P. stability12 .100 52.87

ROLLER LEVER—SPDT 15 AMPS, 125, 250, 480 V AC CONTACTSl BZ-2RW826-A2 One-way roller (9.4mm

× 3.8mm) .37˝ dia. × 15˝wide roller

6 .094 17.23

l BZ-2RW825-A2 One-way roller (4.83mm× 4.83mm) .19˝ dia. × 19˝wide roller

20.12

BA/BE TYPE

BA/BE TYPE

BZ TYPE

BZ TYPE




NetPrice

FLEXIBLE LEAF—SPDT 15 AMPS, 125, 250, 480 V AC CONTACTSl BZ-2RL-A2 Force and stability of the

flexible leaf actuator5 .060 $12.43

l BZ-2RL5551-A2 Dustproof and splashresistant seal

7 .060 16.71

l BZ-2RLT04 MIL-S-8805 applicationrequirements(M8805/1-001)

5 .060 13.98

BZ-2RL24-A2 Operating in temperatureto +250˚F (121˚C)

5 .060 19.71

BZ-RLX Manual reset. Solderterminal

3 .062-.015* 22.18

FLEXIBLE LEAF—SPDT 20 AMPS 125, 250, 480 V AC CONTACTSl BA-2RL-A2 Up to 20 amp load


FLEXIBLE LEAF—SPDT 25 AMPS, 125, 250, 480 V AC CONTACTSl BE-2RL-A4 Up to 25 amp load


*Reset characteristics.

TYPE BZ/BA SERIES SPECIAL CIRCUITRY SWITCHESSpecial sequence switches provide unusual circuit control. A make-before-break switch provides circuit continuity while switching from N.C. to N.O. Inanother Make-before-make switch, upon actuation, one circuit is made an inter-val before the second circuit. Another switch provides a single pulse or momen-tary closure of the contacts with each cycle of operation. Double break versionscan interrupt greater inductive loads and feature shorting bar construction. Asplit contact version allows control of the two isolated circuits.

MANU

CODE

289

TYPE BZ/BA STANDARD BASIC SWITCHES, SCREW TERMINALS



NetPrice

PIN PLUNGER—SPDT 10 AMPS, 125, 250, 480 VAC CONTACTSl BZ-2G-A2 Make-before-break

contact action20 max. .005 $20.58

PIN PLUNGER—SPDT 20 AMPS, 125, 250, 480 VAC CONTACTSl 10BS210 Adjustable differential

travel11-20 .010 at

max.setting

20.48

BA/BE TYPE

BA/BE TYPE

BZ TYPE

BZ TYPE




NetPrice

FLEXIBLE R OLLER LEAF—SPDT 15 AMPS, 125, 250, 480 V AC CONTACTSl BZ-2RL2-A2 Force and stability of the

flexible leaf with roller5 .060 $12.74

l BZ-2RL2T04 MIL-S-8805 applicationrequirements

3.75-5 .060 18.16

FLEXIBLE R OLLER LEAF—SPDT 20 AMPS, 125, 250, 480 V AC CONTACTSl BA-2RL2-A2 Up to 20 amp load



Micro Switch MANU

CODE

289

TYPE BZ/BA STANDARD BASIC SWITCHES, SCREW TERMINALS



NetPrice

PIN PLUNGER—SPDT 15 AMPS, 125, 250, 480 VAC CONTACTSl BZ-3AT Double-break, low

voltage DC applications16-26 .005 $19.34

l BZ-2AW82T Same as above, butwith 1.9 inch rollerlever

4.5 .156 29.45

l BZ-2AW822T Same as above, butwith 1.05 inch rollerlever

8.5 .094 27.55

PIN PLUNGER—SPDT 25 AMPS, 125, 250, 480 VAC CONTACTSl BA-3ST Double-break, low

voltage DC applications26-38 .010 23.62

PIN PLUNGER—SPDT 5 AMPS, 250 VAC CONTACTSl BZ-3YT MIL-S-8805 application

requirements. (splitcontact)

16-26 .005 25.33

l BZ-3YWT82 Same as above, butwith 1.9 inch roller lever

4.5 .156 35.28

l BZ-3YWT822 Same as above, butwith 1.05 inch rollerlever

7 .94 35.28

BASIC SWITCH AUXILIARY ACTUATORSAuxiliary actuators adapt the plunger-type standard basic switch to many appli-cations needs. Auxiliary actuators minimize the need for a large inventory ofswitch types. Actuators and switches are sold as separate items and must beordered separately. Mounting hardware is furnished with the actuator. FEA-TURES: Additional overtravel. Quick, easy installation. Corrosion resistance.

AD5721R

JR

MC2711

Cat. No.Use WithSwitch

OvertravelMin. (in.)

OperatingPosition (in.)

NetPrice

ROLLER LEVER FOR “S” PLUNGER TYPE BZ AND DT SWITCHES ONL Y.PERMITS CAM OPERATION

l JR BZ, DT .437 1.75±.125 $45.65ADJUSTABLE R OLLER LEVER. TANG ON TOP OF ACTUATOR CAN BE BENTTO ADJUST O.P. AND F.P.

l AD5721R BZ, BM .437 approx. 1.25-1.62 17.90l ADA3721R BA, BE .375 approx. 1.594 approx. 24.71l ADD3721R DT .375 approx. 1.562 approx. 23.83

STRAIGHT PLUNGER, PANEL MOUNTl MC2711 BZ, BM .188 .188 20.74l MCA2711 BA, BE .156 1.109 41.57l MCD2711 DT .141 1.094 38.07

NOTE: Switches shown are not included with the actuator. All actuators are for use withpin plunger types only, except cat. no. JR.

MDH3211Q

MC7711

MC2711H

MD3211Q1

Cat. No.Use WithSwitch

OvertravelMin. (in.)

OperatingPosition (in.)

NetPrice

SEALED STRAIGHT PLUNGER. PANEL MOUNT. ELASTOMETER SEALBOOT KEEPS OUT LIQUID SPLASH AND DIR T. FURNISHED UNASSEMBLED

l MC2711H BZ, BM .188 1.141 $45.65l MCA2711H BA, BE .172 1.078±.030 48.28l MCD2711H DT .141 1.094030 69.94

ROLLER PLUNGER. PANEL MOUNT. ROLLER PARALLEL T O LONG AXIS OFTHE SWITCH

l MDA3711Q BA, BE .125 1.422 78.45l MD3211Q DT 3.18 35.7 56.74

HIGH OVERTRAVEL PLUNGER. PANEL MOUNTl MC7711 BZ, BM .812 2.719 40.49l MCA7711 BA, BE .781 2.734 70.51l MCD7711 DT .719 2.719 67.57

NOTE: Switches shown are not included with the actuator. All actuators are for use withpin plunger types only, except cat. no. JR.


Micro Switch MANU

CODE

289

TYPE “3PA” B ASIC SWITCH TERMINAL ENCLOSURESType “3PA” die cast aluminum enclosures protect the switch from physicalabuse, while providing protection for personnel from exposed terminals. Willaccept any of the standard basic switches, “Z”, “A”, “M” etc. The “3PA1” can bemounted from either side through .140˝ dia. holes on 1˝ centres. “3PA2” isflange mounted by means of two 11⁄64˝ dia. holes in the bottom flange.

3PA2

1.0

2.945

1.690

3PA1

TYPE “3PA” ENCLOSURESCat.No. Variation Net Price

DIE CAST ALUMINUM ENCLOSURES3PA1 Side mount $30.713PA2 Bottom mount 47.23

NOTE: ENCLOSURE PRICES DO NOT INCLUDE SWITCHES

TYPE “5PA” PLASTIC TERMINAL ENCLOSURES“5PA” Series plastic terminal enclosures prevent personnel from coming in con-tact with exposed switch terminals, and protects the switch terminals againstshorting or grounding.

“5PA1” will accept any basic switch, (“Z”, “A”, “M”) with solder terminals.

“5PA2” will accept any basic switch, (“Z”, “A”, “M”) with screw terminals.

“5PA3” will accept any basic switch, (“Z”, “A”, “M”) with either screw or solderterminals, which has been assembled in an auxiliary actuator.

.828

.797

2.078

5PA2

2.077

.635

5PA1

5964

5164

218

5PA3

TYPE “5PA” ENCLOSURESCat.No.

Will FitBasic Switch Net Price

PLASTIC TERMINAL ENCLOSURESl 5PA1 With solder terminals $1.50l 5PA2 With screw terminals 1.34l 5PA3 With auxiliary actuators 9.54

NOTE: ENCLOSURE PRICES DO NOT INCLUDE SWITCHES

BASIC SWITCH MOUNTING BRACKETType “8MA” adjustable mounting brackets can regulate the operation point of abasic switch up to .080˝ (2mm) by loosening the locking screw, inserting ascrewdriver in the adjusting slot, and twisting. Sturdy, cadmium-plated steel con-struction. Can be used with all standard basic switches.

8MA1 WITHSWITCH ASSEMBLED

8MA1

TYPE “8MA” ADJUST ABLE MOUNTING BRA CKETCat.No. Has Adjustment Slot Net Price

CADMIUM-PLATED STEELl 8MA1 On the left $16.51l 8MA2 On the right 17.33

17MA1-B CONVERSION MOUNTING BRA CKETThis sturdy corrosion resistant conversion mounting bracket snaps into basicswitch mounting holes—without the use of tools. Fits all standard basic switcheswith mounting holes on 1˝ centres. Brackets and switches must be ordered sep-arately.

17MA1-B

17MA1-B WITHSWITCH ASSEMBLED

Cat.No. For use with switch type Net Price

CONVERSION MOUNTING BRACKETl 17MA1-B “Z”, “A”, “M”, “E”, “DT” etc. $9.23

NOTE: BRACKET PRICES DO NOT INCLUDE SWITCHES

TYPE “12MA” A UXILIARY ACTUATORSThe type “12MA” actuators fit all pin plunger basic switches, “Z”, “A”, “M” as wellas type “TB” two and four-circuit switches. Actuators are available with either 1⁄2˝or 1˝ diameter buttons, in a choice of colours (black or red ). Switch mountingholes and actuator mounting bushings are adjustable to allow the switch to bemounted for best button travel with panel thicknesses from .060˝ to .312˝ . Actu-ators and switches must be ordered separately.

12MA5

1.860

.840 DIA

1.932

12MA1 WITHBASIC SWITCH

TYPE “12MA” A CTUATORSCat.No.

ButtonDia.

ButtonColour Net Price

1⁄2˝ PUSHBUTTON ACTUATORSl 12MA1 1⁄2˝ Black $90.46l 12MA2 1⁄2˝ Red 90.46

1˝ PUSHBUTTON ACTUATORSl 12MA5 1˝ Black 115.29l 12MA6 1˝ Red 115.29l 12MA7 1˝ Green 115.29

NOTE: ACTUATOR PRICES DO NOT INCLUDE SWITCHES


Micro Switch MANU

CODE

289

TYPE “DT” ST ANDARD BASIC SWITCHESTwo independent single-pole double-throw circuits on one housing. Design per-mitting several wiring combinations. Savings in space and weight. Mountinginterchangeability with type Z switches. Temperature tolerance to + 180˚F(82˚C). UL recognized, CSA certified.

DT-2RS1-A7

DT-2RV-A7

DT-2R-A7

DT-2RV3-A7

DT-2R-A7

D7-2RS1-A7

DF2RV3-A7

DT-2RV-A7

TYPE DT STANDARD BASIC SWITCHES, SCREW TERMINALS

Cat. No.OperatingForce (oz.)

OvertravelMin. Inches Net Price

PIN PLUNGER-DPDT 10 AMPS, 125 OR 250 VAC CONTACTSDT-2R-A7 12-20 .005 $79.23STRAIGHT LEVER REVERSED LEVER POSITION-DPDT 10 AMPS, 125 OR250 VAC CONTACTSDT-2RV3-A7 4-7 .010 83.51STRAIGHT LEVER-DPDT 10 AMPS, 125 OR 250 VAC CONTACTSDT-2RV-A7 3.5-6 .062 125.50

DT-2RV216-A7 DT-2RV22-A7 DT-2R12-A7

DT-2RV23-A7 DT-2RV2-A7

DT-2RV22-A7

DT-2RV23-A7

DT-2RV216-A7

DT-2R212-A7

DT-2RV2-A7

TYPE DT STANDARD BASIC SWITCHES, SCREW TERMINALS

Cat. No.OperatingForce (oz.)


ROLLER LEVER (CENTERED STEEL R OLLER)-DPDT 10 AMPS, 125 OR 250VAC CONTACTSDT-2RV216-A7 11.1 .005 $148.191.03˝ (26.2MM) ROLLER LEVER (STEEL R OLLER)-DPDT 10 AMPS, 125 OR250 VAC CONTACTSDT-2RV22-A7 9.14 .031 87.89ROLLER LEVER REVERSED LEVER POSITION-DPDT 10 AMPS, 125 OR 250VAC CONTACTSDT-2RV212-A7 9-15 .005 90.73ROLLER LEVER (CENTERED STEEL R OLLER)-DPDT 10 AMPS, 125 OR 250VAC CONTACTSDT-2RV23-A7 5.5-9.5 .010 85.061.90˝ (48.3MM) ROLLER LEVER (STEEL R OLLER)-DPDT 10 AMPS, 125 OR250 VAC CONTACTSDT-2RV2-A7 4.5-7.5 .047 134.83


Micro Switch MANU

CODE

289

DOOR TYPE BASIC SWITCHESAutomatically cut power when service door or drawer is open, helping protectpersonnel and equipment. Enables circuit testing with power On by manuallypulling rod actuator to maintained-On position. (Closing door or drawer switch.)Basic switches are component recognized by UL to UL1054 special useswitches.

STYLE 2

STYLE 4

STYLE 6

STYLE 1

STYLE 3

STYLE 5

Cat. No.StyleNo.

BasicSwitch

OperatingPosition (In.)

DepressedPosition (In.)

Temp.Ratings Net Price

SPDT-15 AMPS, 125, 250, 480 VAC CONTACTSl 1AC2 1 BZ .250 .125 –65˚F to

+180˚F$57.15

SPDT-5 AMPS, 125 OR 250 VAC CONTACTS. FOUR SPDT CKTS.8AC1 2 SM (4) .203 .125 –65˚F to

+180˚F123.28

SPDT-5 AMPS, 125 OR 250 VAC CONTACTS. THREE 6-FOOT LEADS.SEALED BASIC SWITCHES9AC4 3 SE .203 .125 –65˚F to

+221˚F601.09

SPDT-15 AMPS, 125 OR 250 VAC CONTACTS. CAN BE RESET WITHOUTMOMENTARY CKT. BREAK.

l 13AC1 4 V3 .485 .263 –67˚F to+300˚F

39.11

SPDT-5 AMPS, 125 OR 250 VAC CONTACTS. MINIATURE SIZE.17AC1-T 5 SM .220 .175 –65˚F to

+250˚F21.36

SPDT-5 AMPS, 125 OR 250 VAC CONTACTS. MINIATURE SIZE. (MS16106-4)17AC18-T* 5 SM .220 .175 –65˚F to

+250˚F23.78

SPDT-15 AMPS, 125 OR 250 VAC CONTACTS. TAPPED HOLE IN END OFACTUATOR ROD. (MS16106-1)

l 2AC59* 6 V3 .203 .125 –67˚F to+185˚F

43.80

*These are military approved listings and the temperature range shown is for the finishedproduct. All otherlistings are not military approved and the temperature range shown isthe range for the basic switch only.

STYLE 6

STYLE 2

STYLE 8STYLE 7

DOOR TYPE BASIC SWITCHES WITH HIGH STRENGTH THERMOPLASTICROD ACTUATORS

Cat. No.StyleNo.

BasicSwitch

OperatingPosition (In.)

DepressedPosition (In.) Net Price

SPDT-5 AMPS, 125 OR 250, VAC CONTACTS. FOUR SPDT CKTS. (MS16106-3)8AC9 2 SM (4) .203 .125 $139.01SPDT-15 AMPS, 125 OR 250, VAC CONTACTS.

l 22AC1 6 V3 .203 .125 26.83SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. TAPPED HOLE IN END OFACTUATOR ROD.

l 22AC2 6 V3 .203 .125 27.62SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. TAPPED HOLE IN END OFACTUATOR ROD.

l 23AC2 7 V3 .203 .125 26.57SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. TWO SPDT CKTS.

l 24AC1 8 V3 (2) .187 .125 277.91SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. TAPPED HOLE IN END OFACTUATOR ROD. TWO SPDT CKTS. (MS16106-2)

l 4AC54** 8 V3 (2) .187 .125 544.64SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. TAPPED HOLE IN END OFACTUATOR ROD. TWO SPDT CKTS. (MS16106-5)

l 4AC55 8 V3 (2) .187 .125 69.32

SNAP-IN PANEL MOUNT BASIC SWITCHESAttractive, rugged snap-in panel mount design—easy installation. Choice ofmomentary, alternate push-pull and pull-to-cheat operation. Quick-conntect ter-minals. Expected machanical life: 1 million operations, 95% survival. Tempera-ture range: –35˚ to +180˚F (-3.7˚ to 82˚C). UL recognized, CSA certified. DMSeries Electrical Rating: 10 amps, 125, 250 or 277 VAC. DP Series Electrical Rat-ing: 14 amps, 125, or 250 VAC.

ALTERNATE ACTIONBULLET NOSE PLUNGER

(DPDT SHOWN)

PULL-TO-CHEATFINGER GRIP PLUNGER

WITH FLAT TIP (SPDT SHOWN)

MOMENTARY ACTIONBULLET NOSE PLUNGER

(SPDT SHOWN)

PUSH-PULLFINGER GRIP PLUNGER

(DPDT SHOWN)

2DMPANEL HOLE DETAIL

1DM/1DPPANEL HOLE DETAIL



Micro Switch MANU

CODE

289

DM SERIES

Cat. No.Plunger

Type/ColourFaceplate

ColourOperating

Position (In.)OvertravelMax. (In.) Net Price

SPDT, MOMENTARYl 1DM1 Bullet nose/White White .750±.060 .375 $4.23

SPNC, MOMENTARYl 1DM2 Bullet nose/White White .750±.060 .375 4.38

SPNO, MOMENTARYl 1DM3 Bullet nose/White White .750±.060 .375 24.04

SPDT, MOMENTARYl 1DM18 Concave/Black Grey — .120 4.38l 1DM21 Concave/White White .355±.060 .120 8.77

SPDT, PUSH-PULLl 1DM301 Finger grip/Black Grey — .625 4.64

SPDT, PULL-TO-CHEATl 1DM401** Finger grip/White White — .520 5.57

DPDT, MOMENTARYl 2DM1 Bullet nose/Black Black .770±.040 .400 8.05l 2DM6 Concave/Red Grey — .120 14.65

DPDT, PUSH-PULLl 2DM301 Finger grip/Black Grey — .625 14.65

DPDT, PULL-TO-CHEATl 2DM409 Finger grip/Black Black .745±.050 .590 8.67

**Extended position 23.6mm (.930 in. max.).

DP SERIES

Cat. No.Plunger

Type/ColourFaceplate

ColourOperating

Position (In.)OvertravelMax. (In.) Net Price

SPNO, MOMENTARYl 1DP5 Bullet nose/White White .595±.060 .375 $6.91

TYPE “JT” A CTUATORSFOR “TB” TW O-CIRCUIT SWITCHES

Type “JT” auxiliary actuators for “1TB1” switches must be ordered separately.They adapt “1TB1” switches to be operated by cams, slides or other universalmechanical means. The actuators also provide supplementary overtravel to theswitches. Two screws, nuts and lockwashers are provided with each actuator.

.5001.825

.740

JT-5

Cat.No. Actuator Type Net Price

ACTUATORS FOR “TB” TW O-CIRCUIT SWITCHESl JT-5 Roller leaf $15.27

NOTE: ACTUATOR PRICES DO NOT INCLUDE SWITCHES

TYPE “TB” MINIA TURETWO-CIRCUIT DOUBLE-BREAK SWITCHES

“TB” miniature switches are basic two-circuit double break or four-circuit doublebreak switch units which offer a means of controlling isolated circuits. Becauseof their circuitry, these switches find many uses in modern control systems. Theterminals of two- and four-circuit double-break switches must be wired to identi-cal voltage sources and of the same polarity. The loads should be on the sameside of the line. These switches have several auxiliary actuators, a choice of ter-minal styles and a power load switching capability of up to 10 amperes with amotor handling capacity of 1⁄2 hp at 125 VAC.

ELECTRICAL RATINGTWO-CIRCUIT DOUBLE-BREAK

10 amps 125 and 250 vac; 1⁄2 hp 125 vac; 10 amps 30 vdc.

ITB1-1

ITB1-2

ITB1-3

CONTACT ARRANGEMENTTWO-CIRCUIT DOUBLE-BREAK

TYPE “TB” SWITCHESCat.No. Terminals Net Price

PIN PLUNGER ACTUATOR—TWO-CIRCUIT DOUBLE-BREAK 10 AMP , 125VAC CONTACTS

l 1TB1-1 End Screw $33.06l 1TB1-2 End Solder 31.21l 1TB1-3 Front Solder 43.28

TYPE “SX” SUBMINIA TURE BASIC SWITCHES“SX” series subminiature basic switches are the smallest of the Micro Switchsnap-action switches and are ideal where savings in space and weight areimportant. These switches feature a low operating force to 3 oz. (85 grams) max-imum with current carrying capacity of 7 amps and a mechanical life expectancyof 10 million operations. Mounting is by two .09˝ mounting holes on .19˝ centres.The “T” solder terminals are ideal for wrap around easy solder lead wire attach-ment.

Long-life beryllium-copper spring

Fine silver, gold,or bifurcated-gold contacts forcircuit fidelity

Cover securelycemented tobase

Wear-resistantphenolicbase andcover

Elongatedhole foreasier, moreaccuratemounting

1SX1T

MOUNTING HOLES ACCEPT PINS ORSCREWS OF 2,3/.09 DIA

Cat. No.Operating Max.

Force (oz.)OvertravelMin. Inches

ActuatorDescription Net Price

l 1SX1-T 5.0 .004 Pin Plunger $8.82l 2SX1-T 3.0 .004 Pin Plunger 10.21l 1SX48-T 5.0 .010 Pin Plunger 9.49l 11SX21-T 2.5-5 .004 Pin Plunger 7.69l 311SX1-T 1.76 .014 .135˝ Straight lever 9.54l 311SX2-T 1.1 .025 .505˝ Straight lever 9.18l 311SX3-T 0.71 .024 .965˝ Straight lever 9.44l 311SX4-T 2.1 .010 .042˝ Straight lever 9.64l 311SX5-T 1.1 .022 .459˝ Straight lever 9.96


Micro Switch MANU

CODE

289

TYPE “V3” MINIA TURE BASIC SWITCHV3 miniature basic switches feature high electrical capacity and long life. Theirsize and shape meet design requirements in all types of applications. There is achoice of SPDT, SPNC, and SPNO circuitry. Many level styles, contact materials,and terminal variations can be furnished. UL Recognized, CSA Approved. Con-tact Electro Sonic for ordering information.

V7-2B17D8

V3-1001

V3-343-D8

V3-343-D8

TYPE “V3” MINIA TURE BASIC SWITCHES, QUICK CONNECT TERMINALS



PIN PLUNGER-SPDT 1 AMP, 125 VAC CONTACTSV3-343-D8 General use, gold

alloy crosspointcontacts

8 max. .040 $6.69

PIN PLUNGER-SPDT 5 AMP, 125, 250, 277 VAC CONTACTSV3-2451-D8 Lowest force .53 .050 3.74PIN PLUNGER-SPDT 5 AMP, 125, 250, 277 VAC CONTACTSV3-2401-D8 Lowest force .9 .050 3.49PIN PLUNGER-SPDT 10 AMP, 125 OR 250 VAC CONTACTS

l V7-2B17D8 Low force 2.6 .050 2.42PIN PLUNGER-SPDT 11 AMP, 125, 250, 277 VAC CONTACTS

l V3-101-D8 Higher force. Mostapplications

8 max. .040 3.34

PIN PLUNGER-SPDT 15.1 AMP, 125 OR 250 VAC CONTACTSl V3-1-D8 Highest force. Up

to 15.1 amps loadhandling withreduced life.

6-14 .040 3.44

V3-3001-D8 High force. Up to15.1 amps loadhandling

5.3 .050 3.44

PIN PLUNGER-SPDT 20 AMP, 277 VAC CONTACTSl V7-1V19E9 Up to 20 amps

load handling2.3 - 4.4 .050 2.63

PIN PLUNGER-SPDT 25 AMP, 277 VAC CONTACTSl V7-1Z19E9 Up to 25 amps

handling4.4 - 7.9 .050 2.79

PIN PLUNGE—10 AMP, CONTACTSV3-1001 MIL-S-8805 application

requirements (MS25253-1)(SPDT)

6-14 .040 10.99

V3-1002 MIL-S-8805 applicationrequirements (MS25253-3)(SPNC)

6-14 .040 76.96

V3-1003 MIL-S-8805 applicationrequirements (MS25253-2)(SPNO)

6-14 .040 76.96

TYPE “V3” MINIA TURE BASIC SWITCHES, QUICK CONNTECT TERMINALS

Cat. No. Recommended ForActuator

Length (In)OperatingForce (oz.)


SIMULATED ROLLER—SPDT 10 AMP, 125 OR 250 VAC CONTACTSl V7-1B17D8-263 General use 1.285 1.4 .080 $2.84

SIMULATED ROLLER—SPDT 10 AMP, 125 OR 250 VAC CONTACTSl V7-1B17D8-263 Low force 1.285 1.2 .080 2.84

SIMULATED ROLLER—SPDT 11 AMP, 125, 250, 277 VAC CONTACTSl V7-7B19D8-263 High force. Most

applications1.285 4 .062 2.84

SIMULATED ROLLER—SPDT 15.1 AMP, 125 OR 250 CONTACTSl V7-6C17D8-263 Highest force. Up


1.285 8 .062 2.89

SIMULATED ROLLER—SPDT 15.1 AMP, 125 OR 250 CONTACTSl V7-1C17D8-263 High force. Up to

15.1 amps loadhandling

1.285 3.4 .075 2.89

V7-2B17D8-022

V7-2B17D8-022

V7-1C17D8-002

V7-2B17D8-048


Cat. No.Recommended

For

ActuatorLength

(In.)

OperatingForce(oz.)


STRAIGHT LEVER—SPDT 11 AMP, 125, 250, 277 VAC CONTACTSl V7-1C17D8-002 Higher force.

Most applications.860 9 .040 $2.79

STRAIGHT LEVER—SPDT 15.1 AMP, 125 OR 250 VAC CONTACTSl V7-1C17D8-002 Highest force. Up

to 15.1 amps loadhandling withreduced life

.860 14 .040 2.79

STRAIGHT LEVER—SPDT 15.1 AMP, 125 OR 250 VAC CONTACTSl V7-1C17D8-002 High force. Up to


.860 5.3 .040 2.79

STRAIGHT LEVER—SPDT 10 AMP, 125 OR 250 VAC CONTACTSl V7-2B17D8-022 General use 1.40 1.4 .090 2.73

STRAIGHT LEVER—SPDT 10 AMP, 125 OR 250 VAC CONTACTSl V7-2B17D8-022 Low force 1.40 1.1 .090 2.73

STRAIGHT LEVER—SPDT 11 AMP, 125, 250, 277 VAC CONTACTSV7-1B-17D8-022 Higher force. Most

applications1.40 4 .090 3.31



Micro Switch MANU

CODE

289


Cat. No.Recommended

For

ActuatorLength

(In.)

OperatingForce(oz.)


STRAIGHT LEVER—SPDT 15.1 AMP, 125 OR 250 VAC CONTACTSV7-1C17D8-022 Higher force.

Most applications1.4 3.1 0.90 $2.55

STRAIGHT LEVER—SPDT 5 AMP, 125, 250, 277 VAC CONTACTSl V7-2B17D8-048 Lower force 2.34 .25 .160 2.73

STRAIGHT LEVER—SPDT 10 AMP, 125 OR 250 VAC CONTACTSl V7-2B17D8-048 General use 2.34 .81 .160 2.73

STRAIGHT LEVER—SPDT 10 AMP, 125 OR 250 VAC CONTACTSl V7-2B17D8-048 Low force 2.34 .56 .160 2.73

STRAIGHT LEVER—SPDT 11 AMP, 125, 250, 277 VAC CONTACTSl V7-7B17D8-048 Higher force.

Most applications2.34 2.1 .150 2.73

STRAIGHT LEVER—SPDT 15.1 AMP, 125 OR 250 VAC CONTACTSl V7-6C17D8-048-1 Highest force. Up


2.34 4 .150 2.89

STRAIGHT LEVER—SPDT 15.1 AMP, 125 OR 250 VAC CONTACTSl V7-6C17D8-048-1 High force. Up to


2.34 1.4 .160 2.89

STRAIGHT LEVER—SPDT 10 AMP, 125 OR 250 VAC CONTACTSl V7-6B19D8-057 General use 2.75 .70 .145 2.73

STRAIGHT LEVER—SPDT 11 AMP, 125, 250, 277 VAC CONTACTSl V7-6B19D8-057 Most applications 2.75 1.93 .180 2.73

TYPE “JS” A CTUATORS FOR “SM” SWITCHESType “JS” actuators for “SM” switches must be ordered separately. Two screws,nuts, lockwashers and insulator are supplied with each actuator. Single or tan-dem switch assemblies can be accommodated with appropriate actuators.

JS-2 JS-5 JS-7

JS-220 JS-246 JS-221

JS-31

JS-220, JS-246, JS-221

JS-33

JS-2, JS-5, JS-7

Cat. No. DescriptionActuator

Length (In.)OperatingForce (oz.)


LEAF ACTUATORl JS-2 Straight leaf .66 10 0.15 $2.27l JS-5 Roller leaf

(bronze roller).59 10 .015 4.59

l JS-7 Formed leaf(simulated roller)

.58 10 .031 3.56

LEVER ACTUATORSl JS-220 Straight lever 1.03 1 .030 4.49l JS-246 Roller leaver

(steel roller)1.00 1 .030 12.84

l JS-221 Formed lever(simulated roller)

1.00 1 .030 6.65

TANDEM LEAF A CTUATOR (FOR TWO SWITCHES)l JS-33* Tandem leaf .21 18 .006 5.36l JS-31* Tandem roller

leaf (bronzeroller)

.17 40 .005 10.16

Note: Actuator prices do not include switches. Above actuators should be used below+300˚F. *Travel characteristics on tandem actuators vary with actual basic switchcharacteristics.

V3L-1101-D8V7-2B17D8-201


Cat. No.Recommended

For

ActuatorLength

(In.)

OperatingForce(oz.)


ROLLER LEVER—SPDT 10 AMPS, 125 OR 250 V AC CONTACTSl V7-2B17D8-201 General use .81 3.2 .045 $3.25

ROLLER LEVER—SPDT 10 AMPS, 125 OR 250 V AC CONTACTSl V7-2B17D8-201 Low force .81 2.1 .034 3.25

ROLLER LEVER—SPDT 11 AMPS, 125, 250, 277 V AC CONTACTSl V7-7B17D8-201 Higher force.

Most applications.81 8 .040 3.25

ROLLER LEVER—SPDT 15.1 AMPS, 125 OR 250, V AC CONTACTSl V7-1C17D8-201 Highest force. Up


.81 14 .040 3.30

ROLLER LEVER—SPDT 15.1 AMPS, 125 OR 250, V AC CONTACTSl V7-1C13D8-201 High force. Up to


.81 6.8 .040 3.30

ROLLER LEVER—SPDT 10 AMPS, 125 OR 250 V AC CONTACTSl V3L-1101-D8 General use 1.34 1.6 .085 4.24


Cat. No.Recommended

For

ActuatorLength

(In.)

OperatingForce(oz.)


ROLLER LEVER—SPDT 11 AMPS, 125, 250, 277 V AC CONTACTSl V3L-111-D8 Higher force.

Most applications1.34 4 .085 $4.24

ROLLER LEVER—SPDT 15.1 AMPS, 125 OR 250, V AC CONTACTSV3L-4-D8 Highest force. Up


1.34 8 .085 19.50

ROLLER LEVER—SPDT 15.1 AMPS, 125 OR 250, V AC CONTACTSl V3L-3004-D8 High force. Up to


1.34 3.2 .085 4.49


Micro Switch MANU

CODE

289

TYPE “SM” SUBMINIA TURE BASIC SWITCHESThese switches combine small size and light weight with ample electrical capac-ity, precision operation and long life. Unless otherwise noted, all cat. no.s havesilver contacts. FEATURES: Low operating force to 2 ounces max. Temperaturerange: –65˚ to +185˚F (–54 to 85˚C). UL recognized, CSA certified.

11SM1077-T

111SM2-T

111SM1-T

311SM1-T

11SM1077-T

111SM1-T

111SM2-T

311SM1-T

TYPE “SM” SUB-MINIA TURE BASIC SWITCHES

Cat. No. Recommended ForOperatingForce (oz)


PIN PLUNGERS—SPDT 1 AMP, 125 VAC CONTACTS11SM1077-T Gold alloy contacts 3-5 .005 $7.1212SM604-T Bifurcated gold contacts 3-5 .003 11.8111SM23-T Application requiring gold

contacts3-5 .005 10.57

12SM4-T Best reliability (Bifurcatedgold contacts)

3-5 .003 12.64

PIN PLUNGERS—SPDT 4 AMP, 250 VAC CONTACTS11SM701-T Lower force 2 .005 3.97 Contin ued on ne xt pa ge....


TYPE “SM” SUB-MINIA TURE BASIC SWITCHES

Cat. No. Recommended ForOperatingForce (oz)


PIN PLUNGERS—SPDT 5 AMP, 250 VAC CONTACTS11SM1-T Most applications 3-5 .005 $3.7711SM3-T Operating in temperature

to +250˚F (121˚C)3-5 .005 3.87

l 11SM244-T Operating in temperatureto +400˚F (204C) 100hrs.

3-5 .005 5.78

11SM401-T Less differential time. 3.5 max. .005 8.4621SM284-T2 MIL-S-8805 application

requirements (MS25085-23.5 .005 6.60

21SM284(MS25085-1)

MIL-S-8805 applicationrequirements, solderterminals (MS25085-1)

3-5 .005 6.14

22SM1-T Best stabilityunder varying humidity

3-5 .005 5.93

PIN PLUNGERS—SPDT 11 AMP, 125 OR 250 VAC CONTACTS41SM1-T Up to 11 ampere 1/4 hp

(AC) load handling3-5 .005 4.64

ROLLER LEAF—SPDT 5 AMP , 250 VAC CONTACTS111SM2-T Flexible leaf with roller 7 .030 6.34ROLLER LEAF—SPDT 1 AMP , 125 VAC CONTACTS111SM23-T Flexible leaf with roller

and gold contacts7 .030 12.95

INTEGRAL LEAF—SPDT 5 AMP , 250 VAC CONTACTS111SM1-T Force and stability of

flexible leaf actuator7 .030 5.67

INTEGRAL LEAF—SPDT 1 AMP , 125 VAC CONTACTS111SM17-T Force and stability of

flexible leaf actuator withgold contacts

7 .030 58.18

INTEGRAL LEAF—SPDT 5 AMP , 250 VAC CONTACTS311SM1-T .285 inch (7,24mm)

straight lever1.4 .020 4.59


straight lever with goldcontacts

1.4 .020 10.94


straight level. Lowerforce.

.57 .020 5.11

Omron SwitchesMANU

CODE

329

OMRON B3W SERIESMECHANICAL KEYSWITCHES

Sealed Construction Allows Immersion Cleaning after Automatic Soldering.

FEATURES:•Available in two sizes: .24˝ (6mm) square and .47˝ (12mm) square.•Snap-action contact mechanism assures short key stroking and a sharp click toconfirm input.•Ground terminal available to protect against static electricity.• Ideal for applications such as audio, office, and communications equipment,measuring instruments, TV’s, VCR’s, industrial robots, and vending machines.

6-MM SQUARE TYPESB3W-1000B3W-1050

12-MM SQUARE TYPESB3W-4000B3W-4050

OMRON B3W SERIES MECHANICAL KEYSWITCH[50MA, 24VDC (RESISTIVE LOAD) SPST-NO (MOMENTARY CONTACT)]Cat.No. Type Plunger

Switch Height× Pitch

GroundTerminal Net Price

.24˝ q .24˝ (6MM q 6MM), (OF = 160G).l B3W-1000 Standard Flat 4.3mm × 6.5mm No $.88l B3W-1050 Standard Projected 7.3mm × 6.5mm No .88l B3W-1100 Standard Flat 4.3mm × 6.5mm Yes .88l B3W-1150 Standard Projected 7.3mm × 6.5mm Yes .88

.47˝ q .47˝ (12MM q 12MM), (OF = 200G).l B3W-4000 Standard Flat 4.3mm × 12.5mm No 1.04l B3W-4050 Standard Projected 7.3mm × 12.5mm No 1.04l B3W-4100 Standard Flat 7.3mm × 12.5mm Yes 1.04l B3W-4150 Standard Projected 4.3mm × 12.5mm Yes 1.04

B32-13▫0 B32-10▫0

B3W KEYCAPSCat. No. Colour Net Price

6MM q6MM SWITCH SIZE4MM q4MM KEYCAP SIZE

l B32-1000 Light Grey $.45l B32-1010 Black .45l B32-1020 Orange .45

12MM q12MM SWITCH SIZE12MM q12MM KEYCAP SIZE

l B32-1300 Light Grey .45l B32-1310 Black .45l B32-1320 Orange .45l B32-1330 Yellow .45l B32-1340 Blue .45

Unsealed Snap ActionSwitc hes

OMRON A

A-20GQ-▫-K



Omron SwitchesMANU

CODE

329

Unsealed Snap ActionSwitc hes

A-20GV-▫-K

A-20GV22-▫-K

“A” GENERAL PURPOSE B ASIC SWITCH

Cat. No. Actuator Op. ForcePre-Trav

OverTrav. OP. Point

NetPrice

A-20G-B7-K PinPlunger

400-625g 1.3 mm 0.25 mm 16.3±0.4 mm $12.27

A-20GD-B7-K ShortSpringPlunger

400-625g 1.3 mm 3 mm 26.2±0.5mm 19.99

A-20GV-B7-K HingeLever

70 g 15.9 mm 4 mm 19±0.8 mm 12.33

A-20GV22-B7 ShortHingeRoller

160 g 6.3 mm 1.2 mm 29.8±0.8 mm 13.25

A-20GQ-B7-K PanelMountPlunger

400-625g 1.3 mm 5.6 mm 21.8±0.8 mm 18.66

NOTE: Additional versions, including solder terminal types are available. Please contactElectro Sonic for details.20 amp contact rating, SPDT, screw terminal.

SUBMINIATURE BASIC SWITCHFEATURES:•Super compact, ideal for PCB mounting (6.5 H × 12.8 W × 5.8 D mm).•Switches 3 A loads (general-purpose) 1 A loads (low-force general-purpose) and 0.1A loads (microvoltage/microcurrent).•Long lifespan assured by high-precision dual spring reverse-action mechanism.•Flux penetration prevented by using an insert terminal and allowing a heightdifference at the case bottom.• Ideal for a wide variety of applications, from household appliances and officeequipment to audio equipment and communications equipment.

OMRON D2F

PIN PLUNGERD2F, D2F-01

HINGE LEVERD2F-01L, D2F-01FL

D2F SUBMINIATURE BASIC SWITCH, SPDT, TERMINAL = PCB

Cat. No.ContactRating

Op.Force

Ret.Force

OverTrav. M.D.

Op.Point

NetPrice

l D2F 3 amp 150 g 20 g 0.25 mm 0.12 mm 5.5±0.3 mm $2.35l D2F-01 0.1 amp 150 g 20 g 0.25 mm 0.12 mm 5.5±0.3 mm 2.35l D2F-01L 0.1 amp 80 g 5 g 0.55 mm 0.5 mm 6.8±1.5 mm 2.61l D2F-01FL 0.1 amp 25 g 2 g 0.55 mm 0.5 mm 6.8±1.5 mm 2.61

NOTE: Additional versions, including solder, right angle terminals,and roller actuators areavailable. Please contact Electro Sonic for details.

A-20GD-▫-K

A-20G-▫-K


Omron SwitchesMANU

CODE

329

SS SERIES SUBMINIATURE BASIC SWITCHFEATURES:•Economical, subminiature basic switch offers long service life (30 million operationsminimum)•All models are free from overtravel restrictions, permit easy setting.•Wide switching capacity range from microvoltage/current loads (1 mA at 5 VDC) tohigh-capacity loads 10.1 A at 250 VAC).•Choose standard operating force, low force (SS-▫-F) or super-low force (SS-▫-E)models.•SPDT models shown; SPST-NO and SPST-NC contact forms available.

OMRON SS

HINGE LEVERSS-01GL-E

SIMULATED ROLLER HINGE LEVERSS-01GL13

HINGED ROLLER LEVERSS-01GL2

PIN PLUNGERSS-01

SS SUBMINIATURE BASIC SWITCH

Cat. No.ContactRating Actuator

Op.Force

OverTrav. Op. Point

NetPrice

l SS-5 5 A Pin Plunger 150 g 0.5 mm 8.4±0.5 mm $2.48l SS-5GL 5 A Hinge Lever 50 g 1.2 mm 8.8±0.8 mm 2.70l SS-5-F 5 A Pin Plunger 50 g 0.5 mm 8.4±0.5 mm 2.83l SS-5GL2 5 A Hinge Roller 50 g 1.2 mm 14.5±0.8 mm 3.42l SS-5GL13 5 A Simulated

Roller Hinge50 g 1.2 mm 10.7±0.8 mm 2.83

l SS-01-E .01 A Pin Plunger 25 g 0.5 mm 8.4±0.5 mm 4.86l SS-01GL 0.1 A Hinge Lever 50 g 1.2 mm 8.8±0.8 mm 4.86l SS-01GL13 0.1 A Simulated

Roller Hinge50 g 1.2 mm 10.7±0.8 mm 4.86

l SS-01GL2 0.1 A Hinge Roller 50 g 1.2 mm 14.5±0.8 mm 5.16l SS-10 10.1 A Pin Plunger 150 g 0.4 mm 8.4±0.5 mm 3.33l SS-10GL 10.1 A Hinge Lever 50 g 1.0 mm 8.8±0.8 mm 3.72

*Additional version available. Please contact Electro Sonic for more details.NOTE: SPDT, Terminal: Soldering.

OMRON V

V-15G2-1▫5-KV-10G2-1BOX>4-K

V-15G3-1▫5-KV-10G3-1▫4-K

V-15G4-1▫5-KV-10G4-1▫4-K

V-15G5-1▫5-KV-10G5-1▫4-K



Omron SwitchesMANU

CODE

329

V SERIES BASIC SWITCHFEATURES:•Breaks from 0.1 A to 21 A.•Applications include not only industrial equipment but also commercial products(OEM).•Low force, high contact reliability design available (Type name VX).

V-15G6-1▫5-KV-10G6-1▫4-K

V BASIC SWITCH, QUICK CONNECT, SPDT

Cat. No. ActuatorOp.

ForcePre-Trav

OverTrav Op. Point

NetPrice

CONTACT RATING 15 AMPl V-15G-1C25-K Pin

Plunger200 g 1.2 mm 1.3 mm 14.7±0.4 mm $4.31

l V-15G2-1C25-K HingeLever

125 g 2.3 mm 2.3 mm 15.2+2.6,-3.2 mm 4.38

l V-15G3-1C25-K LongHinge

70 g 9.0 mm 3.0 mm 15.2±2.5 mm 4.78

l V-15G4-1C25-K FormedHinge

125 g 3.3 mm 2.3 mm 18.7±1.2 mm 4.64

l V-15G5-1C25-K ShortHinge

240 g 1.5 mm 1.0 mm 20.7±0.6 mm 5.26

l V-15G6-1C25-K HingeRoller

125 g 3.3 mm 2.3 mm 20.7±1.6 mm 5.26

CONTACT RATING 10 AMPl V-10G-1C24-K Pin

Plunger100 g 1.2 mm 1.3 mm 14.7±0.4 mm 4.31

l V-10G2-1C24-K HingeLever

60 g 3.3 mm 2.3 mm 15.2±1.2 mm 4.38

l V-10G3-1C24-K LongHinge

35 g 7.6 mm 3.2 mm 15.2±2.6 mm 4.60

l V-10G4-1C24-K FormedHinge

60 g 3.3 mm 2.3 mm 18.7±1.2 mm 4.64

l V-10G5-1C24-K ShortRoller

120 g 1.5 mm 1.0 mm 20.7±0.6 mm 5.26

l V-10G6-1C24-K HingeRoller

60 g 3.3 mm 2.3 mm 20.7±1.6 mm 5.26

*Solder and screw terminal types are also available. Please contact Electro Sonic for moredetails.

Z SERIES GENERAL PURPOSE BASIC SWITCHFEATURES:•High precision basic switch in a variety of styles.•Wide margins of operating conditions increases the operating speed range.•Available in a variety of contact forms: basic, spill contact, maintained contact,adjustable contact gap types.

Z-15G-▫-K

Z-15GD-▫-K

Z-15GQ-▫-K

Z BASIC SWITCHES, SCREW TERMINAL, SPDT, 15 AMP


ForceOverTrav.

Op.Point

NetPrice

Z-15G-B7-K PinPlunger

250 to 350 g 0.13 mm 15.9±0.4 mm $9.07

Z-15GD-B7-K ShortSpringPlunger

250 to 350 g 1.6 mm 21.5±0.5 mm 11.14

Z-15GK355-B7-K SpringPlunger,DripProof

540 g 3.5 mm 37.8±1.2 mm 20.11


ForceOverTrav.

Op.Point

NetPrice

Z-15GK55-B7-K SpringPlunger,DripProof

540 g 1.6 mm 28.2±.5 mm $14.99

Z-15GQ-B7-K PanelMountPlunger

250 to 350 g 5.5 mm 21.8±0.8 mm 15.20

Z-15GQ21-B7-K PanelMountCrossRoller

250 to 350 g 3.58 mm 33.4±1.2 mm 17.95

Z-15GQ22-B7-K PanelMountRollerPlunger

250 to 350 g 3.58 mm 33.4±1.2 mm 17.95

Z-15GW-B7-K HingeLever

70 g 5.6 mm 19.±0.8 mm 12.16

Z-15GW2-B7-K HingeRoller

100 g 4.0 mm 30.2±0.8 mm 12.16

Z-15GW22-B7-K ShortHingeRoller

160 g 2.4 mm 30.2±0.4 mm 11.39

*Additional versions are available. Please contact Electro Sonic for more details.

OMRON Z


Omron SwitchesMANU

CODE

329

Sealed Snap ActionSwitc hes

D2HW SEALED ULTRA SUBMINIATURE BASIC SWITCHFEATURES:•Smallest sealed snap-action switch in the industry with a very long stroke for reliableON/OFF action•Case dimensions are 78% of conventional models•Extra-long stroke even without levers (O.T.: 1.4mm)•Made of environmentally friendly materials•All models are lead-free•Lead lengths are a standard 30cm•Contact rating: 2A/12VDC, 1A/24VDC, 0.5A/42VDC

PIN PLUNGERD2SW-3▫S, D2SW-01▫S

HINGE LEVERD2SW-3L3▫S, D2SW-01L1▫S

SIMULATED HINGE LEVERD2SW-3L3▫S, D2SW-01L3▫S

HINGE ROLLER LEVERD2SW-3L2▫S, D2SW-01L2▫S


D2SW HIGH-QUALITY WATERTIGHT BASIC SWITCHFEATURES:•Meets IP67 requirements•Monoblock construction assures high sealing capability•Wide operating temperature range of –40˚C to 85˚C•Perfect for a variety of applications•Standard lead wire lengths on models incorporating them is 30cm (AWG22)

PIN PLUNGER

Cat. No. Contact Form Mounting Structure Net Price

STRAIGHT PCB TERMINALSl D2HW-A2(1)1D SPDT Without Posts $3.83

RIGHT-ANGLED PCB TERMINALSl D2HW-BR2(1)1DR SPDT Posts On Right 3.83

LEFT-ANGLED PCB TERMINALSl D2HW-BL2(1)1DL SPDT Posts On Left 3.83

SOLDER TERMINALSl D2HW-C2(1)1H SPDT M3-Screw Mounting 4.46l D2HW-BR2(1)1H SPDT Posts on Right 3.83l D2HW-BL2(1)1H SPDT Posts on Left 3.83

LEADWIRE-DOWNWARD TERMINALSl D2HW-C2(1)1M SPDT M3-Screw Mounting 8.31l D2HW-C2(1)2M SPST-NC M3-Screw Mounting 8.31l D2HW-C2(1)3M SPST-NO M3-Screw Mounting 8.31l D2HW-BR2(1)1M SPDT Posts On Right 7.69l D2HW-BR2(1)2M SPST-NC Posts On Right 7.69l D2HW-BR2(1)3M SPST-NO Posts On Right 7.69l D2HW-BL2(1)1M SPDT Posts On Left 7.69l D2HW-BL2(1)2M SPST-NC Posts On Left 7.69l D2HW-BL2(1)3M SPST-NO Posts On Left 7.69

LEADWIRE-RIGHT-SIDE TERMINALSl D2HW-C2(1)2MR SPST-NC M3-Screw Mounting 8.31l D2HW-C2(1)3MR SPST-NO M3-Screw Mounting 8.31

D2NW-BR2(1)2MR SPST-NC Posts On Right 7.69l D2HW-BR2(1)3MR SPST-NO Posts On Right 7.69l D2HW-BL2(1)2MR SPST-NC Posts On Left 7.69l D2HW-BL2(1)3MR SPST-NO Posts On Left 7.69

LEADWIRE-LEFT-SIDE TERMINALSl D2HW-BR2(1)2ML SPST-NC Posts On Right 7.69l D2HW-BR2(1)3ML SPST-NO Posts On Right 7.69l D2HW-BL2(1)2ML SPST-NC Posts On Left 7.69l D2HW-BL2(1)3ML SPST-NO Posts On Left 7.69

NOTE: Replace (1) in Cat. No. with 0-Pin Plunger, 1-Hinge Lever, 2-Long Hinge Lever, 3-Simulated Hinge Lever, 6-Leaf Lever, 7-Simulated Leaf Lever, 8-Long Hinge Lever.


Micro Switch MANU - Cesco.com

Documents

Transcript of Micro Switch MANU - Cesco.com