MG Stainless Limited · 2019. 5. 28. · L1799 s- Pair of tainless steel leg supports 150 490 280...

MG Stainless Limitedstainless steel sanitaryware, washroom and catering equipment

Telephone: 0330 311 0070email: [email protected]

PO Box 17521, REDDITCH, B97 9RP

www.mgstainless.co.uk

General information

Urinals

Basins

Vanity Tops and Units

Inset Bowls

Bucket Sinks / Utility Sinks

Janitorial Units

Shower Trays

Mini Sinks

Standard Sinks

Tables / Wall Shelves

Cupboards

WC Pans

Washtroughs

Drinking Fountains

Hospital Equipment

Page 3

4-8

9 -11

12

13 - 14

15 - 16

17

18

19 - 20

21 - 22

23 - 26

27

28

29 - 30

31

32

Non Standard Products

We are able to manufacture special items, where site conditions or specific requirements preclude the use ofstandard products or sizes. Please supply us with exact details and a drawing to avoid any mistakes.

www.mgstainless.co.uk November 2018

Policy StatementThe Company was founded in 1996 as Midtherm Stainless Limited and re-named MG Stainless Limited inOctober 2002. We offer a comprehensive range of sanitaryware, washroom and catering equipment, for projectsrequiring the durability and hygienic properties of stainless steel, manufactured and supplied by skilled andexperienced personnel.

Our aim is to provide our customers with quality products and service, promptly, efficiently and competitively.Therefore, as a policy of continual improvement, we reserve the right to alter specifications without prior notice.

Contents

General Information

All our standard products are manufactured from grade 304 or grade 430 stainless steel to European StandardEN 10088-2, which is suitable for general use in toilets, washrooms and kitchens, within a normal workingenvironment.

If equipment is to be regularly used for any other purpose, or under abnormal atmospheric conditions, eg.swimming pool, marine, laboratory use etc. grade 316 stainless steel may be more suitable, as it offers greaterresistance to corrosive attack from chlorinated water in high ambient humidity, salt and other chemicals.

All grades of stainless steel are affected by a few specific chemicals and acids, so please contact the salesoffice for advice, if you are unsure of its suitability.

Material Specification

Installation AdviceStainless steel fixings should always be used, especially under wet or humid conditions.

If strong acid solutions used for cleaning tiles or masonry, come into contact with stainless steel, rinse offthoroughly with clean water and wipe dry. Hydrochloric or sulphuric acid will attack stainless steel.

Plain carbon steel nails, screws, paint tins, grinding swarf, wire wool etc., left on stainless steel will rust anddiscolour the surface, giving the impression that the stainless steel is rusting.

Upon completion of installation, remove any debris and clean thoroughly, as recommended in Care andMaintenance.

Care and MaintenanceStainless steel should be cleaned with soap or mild detergent and water, using a sponge or cloth, then rinsedwith clean water and wiped dry.

If stubborn marks or deposits are allowed to form, use a cream cleaner that is suitable for stainless steel and,if necessary, a nylon pad or brush.

Regular manual cleaning, once a week, should avoid any problems.

WarningIf the correct grade of stainless steel is used for its intended purpose, within the correct environment andcleaned correctly, it will not rust or stain and will maintain its original appearance for many years.

If it is not cleaned regularly, dirt and other deposits can build up and discolour the surface of stainless steel andwill often resemble rust. However, stubborn marks and deposits can be removed. See Care and Maintenance.

Only use cleaning solutions clearly recommended for use with stainless steel. If in doubt, do not use.

If any liquid containing bleach (sodium hypochlorite) is used on, or accidentally splashed on, stainless steel, achemical reaction can occur. If it is not rinsed off with clean water and wiped dry, within a few minutes, thisreaction causes pitting corrosion of the surface and subsequently rust, which is irreparable..

General Information

Automatic Cistern AdviceWhen installing an automatic cistern, you must ensure that the fixing height is between 1800 and 2000mmto the underside of the cistern, ensuring that the downpipe goes no further than 20mm into the siphon tail.

If the downpipe has been pushed too far into the siphon, it will result in the cistern continuously flushingor dribbling. To remedy this problem, you must either raise the cistern or shorten the downpipe.

An airlock in the siphon can cause the same problem. A quick fill by fully opening the petcock, usually works.

www.mgstainless.co.uk November 2018

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, with polished end panels, top inletvandal-resistant square spargepipe, white plastic domed waste outlet (in a left, right or centralposition), white plastic cistern, downpipe set and coupler.Available in any length, up to 3000mm, allowing approximately 600mm per person.For lengths in excess of 3000mm or for corner installations, two or more separate urinals should be used,each with their own waste and cistern.An elbow can be supplied in lieu of a coupler, to enable the cistern and downpipe to be concealed.

W1101C060*

--

- E2522

38mm

498

1000

230

Length

Not to scale

186

Urinals

W1101.

- White plasticdomed waste 38mm dia

Options

C060* - White plasticautomatic cistern

C080* - Vitreous chinaautomatic cistern

C070* - Stainless steelautomatic cistern

J0795 -C0797 -T0000 -

Joint cover trimCorner pieceTrap shroudDownpipe shroudD0796 -

W1102.

- Grey plasticdomed waste 50mm dia

W1103.

- Stainless steeldomed brass waste 38mm dia

www.mgstainless.co.uk

295

600

450

U01** - Wall Mounted Trough Urinal

November 2018

498

1000

1050

350

186

Length

Optional elbowsto enable cistern anddownpipe to be concealed

E2522

Urinals

100 max.


Manufactured from 1.2mm thick grade 304, satin polished stainless steel, with polished end panels, top inletvandal-resistant square spargepipe, white plastic domed waste outlet (in a left, right or centralposition), white plastic cistern, downpipe set and coupler. The kick-strip is fixed for sealing to the floor.Available in any length, up to 3000mm, allowing approximately 600mm per person.For lengths in excess of 3000mm or for corner installations, two or more separate urinals should be used,each with their own waste and cistern.An elbow can be supplied in lieu of a coupler, to enable the cistern and downpipe to be concealed.

W1101C060*

--

- E2522

38mm

W1101.


Not to scale www.mgstainless.co.uk



J0795 -C0797 -

Joint cover trimCorner pieceDownpipe shroudD0796 -

W1102.


W1103.


295

U03** - Floor Recessed Slab Urinal

Options

November 2018

400Removable access

498

186

350

Length

Urinals

W1101.



Manufactured from 1.2mm thick grade 304, satin polished stainless steel, with polished end panels, top inletvandal-resistant square spargepipe, white plastic domed waste outlet (in a left, right or centralposition), white plastic cistern, downpipe set and coupler. The kick-strip is fixed for sealing to the floor.Available in any length, up to 3000mm, allowing approximately 600mm per person.For lengths in excess of 3000mm or for corner installations, two or more separate urinals should be used,each with their own waste and cistern.An elbow can be supplied in lieu of a coupler, to enable the cistern and downpipe to be concealed.

W1101C060*

--

- E2522

38mm




J0795 -C0797 -


W1102.


W1103.


1000

1050

295

U04** - Floor Standing Slab Urinal

Options

November 2018

295

1000

1050

600Removable access

350

Length

Urinals

498

186

W1101.



Manufactured from 1.2mm thick grade 304, satin polished stainless steel, with polished end panels, top inletvandal-resistant square spargepipe, white plastic domed waste outlet (in a left, right or centralposition), white plastic cistern, downpipe set and coupler.Available in any length, up to 3000mm, allowing approximately 600mm per person.For lengths in excess of 3000mm or for corner installations, two or more separate urinals should be used,each with their own waste and cistern.An elbow can be supplied in lieu of a coupler, to enable the cistern and downpipe to be concealed.

W1101C060*

--

- E2522

38mmThe kick-strip is fixed for sealing to the floor.

Optional elbowsto enable cistern anddownpipe to be concealed

E2522




J0795 -C0797 -


W1102.


W1103.


U05** - Floor Standing Trough Urinal

Options

November 2018

1000

235

330 600

Urinals

186498

Options

Manufactured from 1.2mm thick grade 304, bright polished stainless steel, with top inlet spreader,32mm white plastic domed waste outlet, white plastic cistern and all necessary pipework and fittings.

W1101C060*

- E2522 elbows can be supplied in lieu of a couplers, to enable the cistern and pipework to be concealed.

U0601U0602U0603U0604

- Range of one- Range of two- Range of three- Range of four

Modesty divisionM0799 -T0000 - Trap shroud

W1103.


W1101.






295

640

410

U06** - Bowl Urinal

November 2018

Options

900

430

U1399 -U1398 -

Undershield (400mm deep)Undershield to floor

L1799 s- Pair of tainless steel leg supports

150

490

280 370

300

260235 115

400

105320 350

Basins


Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with valance bracket, twotapholes and 32mm combined waste and overflow assembly.


Manufactured from 1mm thick grade 304, bright polished stainless steel, supplied with valance bracket, twotapholes and 32mm waste, plug and chain.

B1201 - Standard Basin

B1202 - Small Basin

B1203 - Mini Basin

900

900

November 2018

900

105

105

375

320

320

425

375

Basins

454

529

155



Manufactured from 1mm thick grade 304, mirror polished stainless steel, supplied with monobloc taphole and32mm combined waste and overflow assembly.

Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with 60mm long stud bolts,two tapholes and 32mm combined waste and overflow assembly.

B1204 - Corner Basin

B1205 - Oval Inset Basin

B1206 - Circular Inset Basin

November 2018

900

370

200

440

230 335

350 900

280 330

Basins

340

130

180130

320

900

330

200

400

230 335 360

130


Manufactured from 1mm thick grade 304, satin polished stainless steel, knee operated by pushing front panel(15 second temporised water flow), with swan neck spout, mixer valve, splashback and 32mm waste.

Manufactured from 1mm thick grade 304, satin polished stainless steel, knee operated by pushing front panel(15 second temporised water flow), with swan neck spout, mixer valve, splashback and 32mm waste.

Manufactured from 1mm thick grade 304, satin polished stainless steel, non-touch, battery operated electronictap (15 second temporised water flow), mixer valve, splashback and 32mm waste.

B1208 - Small Knee-operated Basin

B1209 - Mini Knee-operated Basin

B1210 - Electronic Non-touch Basin

November 2018

Options

L1799 - Pair of stainless steelleg supports

Vanity Tops and Units

60

170

250

480 900

Manufactured from 1.2mm thick grade 304, satin polished stainless steel with 300mm diameter bowls, suppliedwith 32mm waste and plug (no overflow) or 32mm waste, plug and overflow assembly, tapholesas required. Units are supplied with 30mm square tubular, grade 430 stainless steel stand and adjustable feet.Available in any length, up to 2875mm, allowing approximately 600mm per person.Tapholes as required.

W1130 W1132

--

Vanity Tops- with one bowl (600mm wide)- with two bowls (1200mm wide)- with three bowls (1800mm wide)- with four bowls (2400mm wide)

V1291TV1292TV1293TV1294T

Length (1200)

W1130.

- CP plasticwaste & plug 32mm dia

W1132.

- CP plastic waste, plug& overflow assembly 32mm dia

300 500

Removable access

Recessed kick strip

Vanity Units- with one bowl (600mm wide)- with two bowls (1200mm wide)- with three bowls (1800mm wide)- with four bowls (2400mm wide)

V1291V1292V1293V1294


100

November 2018

B

A170

B1229B1233B1239B1241B1246

290 260330 300390 360410 380460 420

A B

200

360

330

180

330360

235 260

A

V1023V1029V1033V1039V1041V1046

230 200 115290 260 130330 300 140390 360 150410 380 155460 420 160

A B C

B

C

Inset Bowls

390

510

155


Manufactured from 1mm thick grade 304, mirror polished stainless steel, supplied with 32mm wasteand plug. They can be fitted into a worktop, or undermounted, with a strong adhesive such as ‘gripfil’ or silicone.

W1130

Manufactured from 1mm thick grade 304, mirror polished stainless steel, supplied with 32mm wasteand plug. They can be fitted into a worktop, or undermounted, with a strong adhesive such as ‘gripfil’ or silicone.

W1130Manufactured from 1mm thick grade 304, mirror polished stainless steel, supplied with 32mm wasteand plug. They can be fitted into a worktop, or undermounted, with a strong adhesive such as ‘gripfil’ or silicone.

W1130

Manufactured from 1mm thick grade 304, bright polished stainless steel, supplied with 38mm combinedwaste and overflow assembly or 38mm waste and plug (no overflow). They can be fitted into a worktop,or undermounted, with a strong adhesive such as ‘gripfil’ or silicone.

W1132W1130


W1132W1130


W1132W1130

Vanity Bowls

V1051 - Oval Inset Vanity Bowl

Circular Inset Bowls

B1222 - Square Inset Bowl

B1224 - Rectangular Inset Bowl

June 2019

485

450A

535

400A

635

450 A

435

485

485B454520

B454530

200

300B454525 250

A

B504020B504025B504030

200250300

A

B604525B604530

250300

A

450

500

600

Inset Bowls

435

400A435

B404020

B404030

200

300B404025 250

A

400

435

340 A375 B403420

B403430

200

300B403425 250

A

400

W1130.

- CP plasticwaste & plug 38mm dia

W1132.

- CP plastic waste, plug& overflow assembly 38mm dia

W1140 - Standpipe strainer waste 200mm deep 38mm dia.Standpipe strainer waste 250mm deep 38mm dia.Standpipe strainer waste 300mm deep 38mm dia.

W1141 -W1142 -


Manufactured from 1.2mm thick grade 304, satin polished stainless steel with a flat flange which can be fixedinto a worktop, or undermounted, with a strong adhesive such as ‘gripfil’ or silicone. They are supplied with a

38mm waste and plug (no overflow) or 38mm waste, plug and overflow assembly.W1130 W1132

Options

Inset Sink Bowls

November 2018

230

80

410

WC Pans

510

360

Low level concealedplastic cistern withstandard lever kit.

410

S trap conversion bend

Low level concealedplastic cistern and withpush button kit.

750

360

S1188

240

S1188 - Black polypropylene seat padsBlack plastic seat and coverc/w stainless steel seat hinges

W1099 -


Manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with 100mm diameter horizontalsoil outlet, 38mm diameter flushpipe connection and complete with back bars and fixing rods.

Holes can be drilled to suit a standard toilet seat.black polypropylene seat pads can be fitted, at an extra cost.

-- S1188

Manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with 100mm diameter horizontaloutlet, 38mm diameter flushpipe connection, rear extension box (to allow an S trap conversion bend to be used)and a floor fixing base plate.

Holes can be drilled to suit a standard toilet seat.black polypropylene seat pads can be supplied fitted, at an extra cost.

-- S1188

Options

W1003 - Shrouded WC Pan - P trap

W1004 - Shrouded WC Pan - S trap

November 2018

650

230

640

400

700

700

270

High level plasticconcealed cisternwith lever kit.

1700

WC Pans

770

360

Black plastic seat and coverc/w stainless steel seat hinges

W1099 -S1188 - Black polypropylene seat pads


The pan is manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with security flushingrim and 100mm diameter plastic pan connector (or an S trap plastic conversion bend can be supplied on request)The rear panel is manufactured from 1.2mm thick, satin polished stainless steel and includes a 7.5 litre dualflush cistern and has removable access panels for fixing and making the plumbing connections.

Holes can be drilled to suit a standard toilet seat.black polypropylene seat pads can be supplied fitted, at an extra cost.

-- S1188

Manufactured from 1.6mm thick grade 304, satin polished stainless steel, with 38mm back inlet flushingspreader and 110mm diameter spigot drainage outlet. A high level cistern must be used, at the recommendedfixing height of 1700mm.

Options

W1010 - Rear Panelled WC Suite - P trap

W1011 - Squatting WC Pan

November 2018

600

430

A850

150490

280 370

D B

300

C

U5701U5702

600 650 540 5401000 900 940 790

A B C D

400

60

600

400

300535

400 525

300

Bucket Sinks / Utility Sinks

November 2018Not to scale www.mgstainless.co.uk

Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with brackets, legs, loosesplashback, hinged bucket grating and 32mm combined waste and overflow assembly.W1132

Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with brackets, legs,splashback, hinged bucket grating and 38mm combined waste and overflow assembly.W1132

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 30mm square tubulargrade 430 stainless steel stand and 38mm waste and plug.

Tapholes as required.W1130

-

B1801 Standard Bucket Sink

B1802 Large Bucket Sink

Utility Sinks

475

300

500

600

425

Janitorial Units

310

600

550

700

300

335

250


Manufactured in accordance with HTM64, from 1mm thick grade 304, satin polished stainless steel, suppliedwith legs, hinged bucket grating, wastes (no overflows) and quarter-turn monobloc sink mixer.

Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with legs, lift-out bucketgrid, wastes and monobloc sink mixer.

J0001 - Janitorial Unit 550x700

J0000 - Janitorial Unit 500x600

November 2018

315

100

225

675

370

25

225

675

Length

Length

75

L1799 Leg supports

Washtroughs


S17** - Loose splashback 300mm highL1799 -L1799F -

Stainless steel leg supportsStainless steel leg support framefor K9302 knee operated valves S9401 - Swan neck spout

K9302 - Frame-mountedknee operated valve

S9402 - Bib spout W1122 - Plastic flushgrated waste 38mm dia.

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with brackets and38mm plastic grated waste (in a left, right or central position).Available in any length, up to 3000mm, allowing approximately 600mm per person.Undershielding down to the floor, with access panels, can be supplied, at an extra cost.

W1122

--

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with brackets and38mm plastic grated waste (in a left, right or central position).Available in any length, up to 3000mm, allowing approximately 600mm per person.Undershielding down to the floor, with access panels, can be supplied, at an extra cost.Tapholes as required.

W1122

---

Options

W14** - Taplanding Washtrough

W13** - Contract Washtrough

November 2018

355

300

225

675

225

675

740

Length

Length

Pre-mixed water

S9402

K9302

L1799F Leg support frame

Washtroughs

60

150


S17** - Loose splashback 300mm highL1799 -L1799F -

Stainless steel leg supportsStainless steel leg support framefor K9302 knee operated valves S9401 - Swan neck spout

K9302 - Frame-mountedknee operated valve

S9402 - Bib spout W1122 - Plastic flushgrated waste 38mm dia.

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with brackets and38mm plastic grated waste (in a left, right or central position).Available in any length, up to 3000mm, allowing approximately 600mm per person.Undershielding down to the floor, with access panels, can be supplied, at an extra cost.Tapholes as required.

W1122

---

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 30mm square tubularstainless steel stand and 38mm plastic grated waste (in a left, right or central position).Available in any length, up to 3000mm, allowing approximately 600mm per person.Undershielding down to the floor, with access panels, can be supplied, at an extra cost.Tapholes as required.

W1122---

Options

W16** - Island Washtrough

W15** - Splashback Washtrough

November 2018

Drinking Fountains

315

200

580 junior700 adult

275

400

40

315

165

D1091 - CP brass bubbler with push-button D1090 - CP brass cup filler with push-button


315

275

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 32mm flush gratedwaste, 1 bubbler and/or cup-filler.D109 D1090



Options

D2003 - Inset Drinking Fountain

D2002 - Shrouded Drinking Fountain

D2001 - Standard Drinking Fountain

380 junior500 adult

November 2018

Drinking Fountains

780 junior900 adult

300

300

780 junior900 adult

November 2018

D1091 - CP brass bubbler with push-button D1090 - CP brass cup filler with push-button


315

275

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 32mm flush gratedwaste, 1 bubbler and/or cup-filler.Available in two heights, 780mm for juniors and 900mm for adults.

D109 D1090- D2004J D2004A

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 32mm flush gratedwaste, 1 bubbler and/or cup-filler.Available in two heights, 780mm for juniors and 900mm for adults.

D109 D1090- D2004J D2004A

Options

D2005 - Pedestal Drinking Fountain

D2004 - Floor-standing Drinking Fountain

480

Length

25

350

550

250

350

550

465

Length

75

60

Concealed hangerbrackets

Hospital Equipment

440

Length

100

350

550

Concealed hangerbrackets


H38** - Splashback Scrub-up Trough

H39** - Standard Scrub-up Trough

H37** - Taplanding Scrub-up TroughManufactured in accordance with HTM64, from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith brackets and 38mm plastic grated waste (in a left, right or central position).Available in any length, up to 3000mm, allowing approximately 600 per person.Tapholes as required.

W1122--

Manufactured in accordance with HTM64, from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith brackets and 38mm plastic grated waste (in a left, right or central position).Available in any length, up to 3000mm, allowing approximately 600mm per person.Tapholes as required.

W1122--

Manufactured in accordance with HTM64, from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith brackets and 38mm plastic grated waste (in a left, right or central position).Available in any length, up to 3000mm, allowing approximately 600mm per person.

W1122-

November 2018

600

1600

900

300365

125500

330

1000.

300

400

C1196

L1799 Leg supports

Hospital Equipment

900

600

1000

330

365

125

300

1000

C1196

L1799 Leg supports

High level stainless steel cisternC1195 - Low level stainless steel cisternC1196 -L1799 -

B1001 - Bucket gratingStainless steel leg supports

T3994 - 110mm stainlesssteel pushfit P trap


NB: left or right hand drainer


Options

H3001 - Combined Sink/Slop Hopper (top inlet)H3002 - Combined Sink/Slop Hopper (back inlet)

Manufactured in accordance with HTM64, from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith anti-drip edges, brackets, top or back inlet 38mm flushpipe connection, 110mm spigot soil outlet and38mm waste.

Tapholes as required.-

H3101 - Combined Slop Hopper/Drainer (top inlet)H3102 - Combined Slop Hopper/Drainer (back inlet)

Manufactured in accordance with HTM64, from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith anti-drip edges, brackets, top or back inlet 38mm flushpipe connection and 110mm spigot soil outlet.


November 2018

600

600

330

900

365

125

300

315

L1799 Leg supports

T3994

Hospital Equipment

600

600

330

600365

125

300

1000

C1196

B1001 Bucket grating

C1195

High level stainless steel cisternC1195 - Low level stainless steel cisternC1196 -L1799 -

B1001 - Bucket gratingStainless steel leg supports

T3994 - 110mm stainlesssteel pushfit P trap


Options

H3201 - Wall Mounted Slop Hopper (top inlet)H3202 - Wall Mounted Slop Hopper (back inlet)

Manufactured in accordance with HTM64, from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith anti-drip edges, brackets, top or back inlet 38mm flushpipe connection and 110mm spigot soil outlet.


H3401 - Floor Standing Slop Hopper (top inlet)H3402 - Floor Standing Slop Hopper (back inlet)

Manufactured in accordance with HTM64, from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith top or back inlet 38mm flushpipe connection and 110mm spigot soil outlet.

November 2018

Hospital Equipment

600

1200

300

30

900

200

200

400

500

600300 400

500

600

600

600

400

600

1200

400

30

900

500

L1799

200

500

L1799 - Pair of stainless steel leg supportsOptions

H3601 -single bowl

H3602 -double bowl

600

1200

400

500

H3604 -single bowlsingle drainer




H3301 - Plaster Sink & DrainerH3302 - Plaster Sink

Manufactured in accordance with HTM64, from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith anti-drip edges, brackets and 38mm standpipe strainer waste and plug. A sump containing a pull-out basketand cover is fitted to the bowl.


H360* - Hospital SinksManufactured in accordance with HTM64, from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith anti-drip edges, brackets and 38mm waste (no overflow).

Tapholes as required.W1130

-

November 2018

760/900

760/900100

40

760/900

760/900 200

Shower Trays


S2201 - Floor Recessed Shower Tray 760x760S2202 - Floor Recessed Shower Tray 900x900

S2301 - Floor Standing Shower Tray 760x760S2302 - Floor Standing Shower Tray 900x900

Manufactured from 1.2mm thick grade 304, satin polished stainless steel and supplied with 38mmplastic grated waste.

W1122

Manufactured from 1.2mm thick grade 304, satin polished stainless steel and supplied with removableaccess and 38mm plastic grated waste.W1122

November 2018

Not to scale

Page 32

August 2018

1200

Mini Sinks

400

500

340 500

900

200

250

400

1000

340 500

400

1800

340 500

100

20 60

S5005

S5005T

Mini Sink SB Unit

Mini Sink SB Top only

Mini Sink DB Unit

Mini Sink DB Top only

S5110

S5110T

- (sit-on or inset)

- (sit-on or inset)

S5518

S5518T

Mini Sink DBDD Unit

Mini Sink DBDD Top only- (sit-on or inset)

25 flange

Inset

400

1200

400

1500

340 500

Cut outC6893 -D6898 - Additional undershelf

S5210

S5210T

Mini Sink SBSD Unit

Mini Sink SBSD Top only- (sit-on or inset)


S5312

S5312T

Mini Sink SBDD Unit

Mini Sink SBDD Top only- (sit-on or inset)

S5415

S5415T

Mini Sink DBSD Unit

Mini Sink DBSD Top only- (sit-on or inset)


250x250x200 deep335x235x180 deep330x330x200 deep340x300x200 deep350x290x200 deep400x290x200 deep

Alternative bowl sizes available:250x250x200 deep335x235x180 deep330x330x200 deep340x300x200 deep350x290x200 deep400x290x200 deep

Alternative bowl sizes available:

400

1000

340 500

C8390 -U6897 -

Mitred cornerEnd upstand


Options

Manufactured from 1.2mm thick grade 304, satin polished stainless steel with 400x340x200mm deep bowl,38mm combined waste & overflow assembly, 30mm square tubular, grade 430 stainless steel stand

and adjustable feet (with or without undershelf). Tops only can be supplied as inset or sit-on.Tapholes as required.

W1132

-

November 2018

600

700

450

900

300

250

600

1500

450 650

100

2060

650

S6007

S6007T

Standard SB Sink Unit

Standard SB Sink Top only- (sit-on or inset)

600

Length

450 650

S6210S6212S6215S6218

S6210TS6212TS6215TS6218T

Standard SBSD Sink Unit

Standard SBSD Sink Top only

- 1000mm long- 1200mm long- 1500mm long- 1800mm long

- 1000mm long (sit-on or inset)- 1200mm long (sit-on or inset)- 1500mm long (sit-on or inset)- 1800mm long (sit-on or inset)


25 flange

Inset

Standard Sinks

Additional strengtheningDrawerDrawer with lockFour standard-duty castors (two braked)Four heavy-duty castors (two braked)

S6892 -D6894 -D6895 -C5599 -C5597 -

Additional undershelfCut outMitred cornerEnd upstand

D6898 -C6893 -C8390 -U6897 -


S6115

S6115T

Standard DB Sink Unit

Standard DB Sink Top only- (sit-on or inset)

Options

Manufactured from 1.2mm thick grade 304, satin polished stainless steel with 600x450x300mm deep bowls,38mm standpipe strainer waste, 30mm square tubular, grade 430 stainless steel stand and adjustable

feet (with or without undershelf). Tops only can be supplied as inset or sit-on.If an extra large bowl (760x510) is required, the width must be increased from 650mm to a minimum of 700and will incur an extra cost.Tapholes as required.

W1142

-

-

November 2018

650

600

Length

450

600

Length

450 650

600

Length

450 650

S6315S6318

S6315TS6318T

Standard SBDD Sink Unit

Standard SBDD Sink Top only

- 1500mm long- 1800mm long

- 1500mm long (sit-on or inset)- 1800mm long (sit-on or inset)

S6418S6424

S6418TS6424T

Standard DBSD Sink Unit

Standard DBSD Sink Top only

- 1800mm long- 2400mm long

- 1800mm long (sit-on or inset)- 2400mm long (sit-on or inset)

NB: Left or right hand drainer

S6524S6530S6535

S6524TS6530TS6535T

Standard DBDD Sink Unit

Standard DBDD Sink Top only

- 2400mm long- 3000mm long- 3500mm long

- 2400mm long (sit-on or inset)- 3000mm long (sit-on or inset)- 3500mm long (sit-on or inset)

Standard Sinks

900

300

250

100

2060

400x400x250 deep400x400x300 deep500x400x250 deep500x400x300 deep600x450x250 deep

760x510x300 deep760x510x380 deep

Extra large bowls

Alternative bowl sizes available:

25 flange

Inset

Additional strengtheningDrawerDrawer with lockFour standard-duty castors (two braked)Four heavy-duty castors (two braked)

S6892 -D6894 -D6895 -C5599 -C5597 -

Additional undershelfCut outMitred cornerEnd upstand

D6898 -C6893 -C8390 -U6897 -


Options

Manufactured from 1.2mm thick grade 304, satin polished stainless steel with 600x450x300mm deep bowls,38mm standpipe strainer waste, 30mm square tubular, grade 430 stainless steel stand and adjustable

feet (with or without undershelf). Tops only can be supplied as inset or sit-on.If an extra large bowl (760x510) is required, the width must be increased from 650mm to a minimum of 700and will incur an extra cost.Tapholes as required.

W1142

-

-

November 2018

900

900

250

Length

650

100

250

Length

Length

300

50 35

250

Tables / Wall Shelves

650

60


S6892 - Additional strengtheningD6894 -D6895 -C5599 -C5597 -D6898 -

DrawerDrawer with lockFour standard-duty castors (two braked)Four heavy-duty castors (two braked)Additional shelf

Cut-outMitred cornerEnd upstandWeld-in 400x400x300 bowl c/w waste

C6893 -C8390 -U6897 -W0011 -

Weld-in 500x400x300 bowl c/w wasteWeld-in 600x450x300 bowl c/w wasteWeld-in 300 diameter bowl c/w waste

W0012 -W0013 -W0022 -

Options

T66** - Centre Table

T67** - Wall Table

W75** - Wall Shelf

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 30mm square tubulargrade 430 stainless steel stand with adjustable feet (with or without undershelf). Worktop only can be supplied.Available in any length up to 2875mm.-

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 30mm square tubulargrade 430 stainless steel stand with adjustable feet (with or without undershelf). Worktop only can be supplied.Available in any length up to 2875mm.-

Manufactured from 1.2mm thick grade 430, satin polished stainless steel, supplied with brackets.Available in any length up to 2875mm.-

November 2018

L7499 -S6892 -

Hinged or sliding door lock (per door)Additional strengthening

D6894 -D6895 -C5599 -C5597 -D6898 -

DrawerDrawer with lockFour standard-duty castors (two braked)Four heavy-duty castors (two braked)Additional shelf

Length

900

150

650

Length

600

300

Cut-outMitred cornerEnd upstandWeld-in 400x400x300 bowl c/w waste

C6893 -C8390 -U6897 -W0011 -

Weld-in 500x400x300 bowl c/w wasteWeld-in 600x450x300 bowl c/w wasteWeld-in 300 diameter bowl c/w waste

W0012 -W0013 -W0022 -

Cupboards


Options

C71** - Floor Cupboard

C73** - Wall CupboardManufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with sliding or hinged doors,30mm square tubular grade 430 stainless steel frame and intermediate shelf.Available in any length, from 600 to 1500mm.-

Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with sliding or hinged doors,30mm square tubular grade 430 stainless steel frame, adjustable feet and intermediate shelf.Available in any length, from 600 to 2400mm.Sink or handwash bowls can be welded into the top at an extra cost.

--

1400

November 2018

MG Stainless Limited · 2019. 5. 28. · L1799 s- Pair of tainless steel leg supports 150 490 280...

Documents

Transcript of MG Stainless Limited · 2019. 5. 28. · L1799 s- Pair of tainless steel leg supports 150 490 280...