MFT-FOX-VT-2L- HANGERS- UNDERCUT ANCHORS
Transcript of MFT-FOX-VT-2L- HANGERS- UNDERCUT ANCHORS
MFT-FOX-VT-2L- HANGERS- UNDERCUT ANCHORSHilti facade system
2 www.hilti.com
Panels 3
Application and Description 4
System Drawings 5-16
Brackets Range MFT-FOX VT Medium 17 MFT-FOX VT Large 17
Bracket Profile Adjustment 18
Products Range 19-20
CONTENT AND OVERVIEW
3www.hilti.com
MFT-FOX-VT-2L-hangers-undercut anchors
This is an interactive page! Click on the move-back button to jump back to the CONTENT AND OVERVIEW.
MFT-FOX-VT-2L-hangers-undercut anchors
4 www.hilti.com
This is an interactive page! Click on the move-back button to jump back to the CONTENT AND OVERVIEW.
APPLICATION AND DESCRIPTION
MFT-FOX-VT-2L-hangers-undercut anchors
The system consists of thermal free wall brackets and profiles, and is specifically designed for vertical/horizontal substructures with undercut anchors for invisible fix-ing in ventilated facades. Wall brackets are supplied with powder coated base plate, according to the method of installation to the base material - anchors, screws and direct fastening - with different hole geometries in the base plate (available hole ge-ometries are shown in the catalogue, on HOL or on the following pages).
Wall brackets are designed with both fixed and flexible points to allow for thermal expansion of the profile. The fixed point takes the weight of the panels and substruc-ture and the proportional wind loads, while the flexible point only assumes the pro-portional wind loads.
Vertical profiles are connected to the wall brackets with specially designed screws for fixed and flexible points. This allows virtually-frictionless sliding of the profiles against the wall brackets and keeps the profile connected by the fixed point in place. The flexible point makes sure that there are no additional loads on the substructure from the profile’s expansion forces.
The adjustment of the profiles against the wall brackets is supported with a ‘helping hand’. The helping hand keeps the profile in position whilst the profile is being fixed with screws, allowing a fast connection to the bracket. With this system, wall toler-ances of up to 40 mm can be perfectly balanced. The wall brackets are available from 140 mm to 320 mm.To avoid corrosion the base plate of the bracket is powder coated.The horizontal hanger profiles with elongated application will be fixed on the vertical profiles. Fix points will be realized with 2 screws in the elongated holes; flexible points with 1 screw. Hangers will be distinguished into fix, leveling and leveling+ fixing appli-cation
Advantages:• Flexible design using fixed and flexible points• 40 mm adjustment capability of the profiles in the wall brackets• Bracket length from 140 mm to 320 mm• Brackets can be mounted using a range of methods - anchors, screws or direct fastening• Avoiding contact corrosion by powder coated base plate• Substructures can be designed with PROFIS Fa<;ade to generate technically- sound and economically-optimized solutions• Usable for every panel with an approval for the undercut fixing
5www.hilti.com
MFT-FOX-VT-2L-hangers-undercut anchors
VIEW OF CLADDING
This is an interactive page! By clicking on a system part you get directed to the respective detail page.Click on the move-back button to jump back to the CONTENT AND OVERVIEW.
MFT-FOX VT
MFT-FOX VTM
FT-F
OX
VTM
FT-F
OX
HI
MFT
-FO
X VT
MFT
-FO
X VT
MFT-FOX VT
MFT-FOX VT
104
109
108
102
106
103
101
107
105MFT-FOX VT105
MFT-FOX VT106
MFT
-FO
X VT
6 www.hilti.com
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding Profile fastener
MFT-FOX VT 101
X
1
3
2
6
7
45
8
910sH
≥ 30
ca. 2
5
11
13
12
FOX
VT10
2FO
X VT
103
FOX
VT10
8FO
X VT
109
FOX
VT10
4
FOX VT107
FOX VT101
7www.hilti.com
MFT-FOX-VT-2L-hangers-undercut anchors
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding
MFT-FOX VT 102
1
3
267
4
58
X
sH
sH
1
3
267
4
58
X
sH
sH
≥ 30ca. 25
≥ 30ca. 25
11
9
9
10
10
12
12
11
SP =
slid
e po
int
FP =
fixe
d po
int
Vertical section-fixed point
FOX VT101
FOX
VT10
3
FOX
VT10
8FO
X VT
109
FOX
VT10
4
FOX VT107
FOX
VT10
2
8 www.hilti.com
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding
MFT-FOX VT 102
1
3
267
4
58
X
sH
sH
≥ 30ca. 25
sH
sH
15
9
10
11
12
13
SP =
slid
e po
int
FP =
fixe
d po
int
FOX VT101
FOX
VT10
3
FOX
VT10
8FO
X VT
109
FOX
VT10
4
FOX VT107
FOX
VT10
2
9www.hilti.com
MFT-FOX-VT-2L-hangers-undercut anchors
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding
MFT-FOX VT 103
1
3
2
6
7
4
5
8X
sH
sH
sH
sH
≥ 30ca. 25
9
10
11
12
SP =
slid
e po
int
FOX VT101
FOX
VT10
2
FOX
VT10
8FO
X VT
109
FOX
VT10
4
FOX VT107
FOX
VT10
3
10 www.hilti.com
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
MFT-FOX VT 104
1
32
6
7
4
58
X
> 100
sH
sH
≥ 30ca. 25
9
10
11
12
13SP
= s
lide
poin
t
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding Profile fastener
FOX VT101
FOX
VT10
2FO
X VT
103
FOX
VT10
8FO
X VT
109
FOX VT107
FOX
VT10
4
11www.hilti.com
MFT-FOX-VT-2L-hangers-undercut anchors
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding Profile fastener
MFT-FOX VT 105
31
2
6
7
4
5 8
X
X
> 100
> 100
≥ 30
ca. 2
5
≥ 30 ca. 25
9
10
1112
13
105 105FOX VT FOX VT
12 www.hilti.com
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding Profile fastener
MFT-FOX VT 106
3
1
2
6
7
4 5
8
X
X≥
30ca
. 25
≥ 30ca. 25
910
11
12
13
106FOX VT FOX VT
106
13www.hilti.com
MFT-FOX-VT-2L-hangers-undercut anchors
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding Profile fastener
MFT-FOX VT 107
3
12
67
45
8
X
> 100
≥ 30
ca.2
5
9 10
1112
13
FOX VT101
FOX
VT10
2FO
X VT
103
FOX
VT10
8FO
X VT
109
FOX
VT10
4
FOX VT107
14 www.hilti.com
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding Profile fastener
MFT-FOX VT 108
3
1
2
6
7
4
58
> 100
X
sH
sH
sH
sH
≥ 30ca. 25
9
10
11
12
13
SP =
slid
e po
int
FOX VT101
FOX
VT10
2FO
X VT
103
FOX
VT10
9
FOX
VT10
4
FOX VT107
FOX
VT10
8
15www.hilti.com
MFT-FOX-VT-2L-hangers-undercut anchors
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding
MFT-FOX VT 109
3
1
2
6
74
58
X
> 100
sH
sH
≥ 30ca. 25
9
10
11
12
SP =
slid
e po
int
MFT MFI101
MFT
MFI
102
MFT
MFI
103
MFT
MFI
108
MFT
MFI
104
MFT MFI107
MFT
MFI
109
16 www.hilti.com
This is an interactive page! Click on the move-back button to jump back to the VIEW OF CLADDING.
Legend: Base material Anchor acc. to static Bracket Insulation Insulation fastener Profile Self drilling screw Ventilation gap Load-bearing hanger profile Hanger Cladding fixing Cladding
MFT-FOX VT 109
3
1
2
67
48
X
5
sH
sH
≥ 30ca. 25
9
10
11
12
SP =
slid
e po
int
FOX VT101
FOX
VT10
2FO
X VT
103
FOX
VT10
9
FOX
VT10
4
FOX VT107
FOX
VT10
8
17www.hilti.com
MFT-FOX-VT-2L-hangers-undercut anchors
This is an interactive page! Click on the move-back button to jump back to the CONTENT AND OVERVIEW.
BRACKETS RANGE
62 62
150
150
R5,5
22
R3,25
25
62
80
R5,5
6,5
80
22
62
Anchor Direct fasteningScrew fastening
Anchor Direct fastening Screw fastening
62 62
150
150
R5,5
22
R3,25
25
62
80
R5,5
6,5
80
22
62
Anchor Direct fasteningScrew fastening
Anchor Direct fastening Screw fastening
MFT-FOX VT MediumOrder Description Item No. LengthDIRECT FASTENING and SCREWS D=6,5 mmMFT-FOX VT 140 M 6,5 2096973 140 mm
MFT-FOX VT 160 M 6,5 2096975 160 mm
MFT-FOX VT 180 M 6,5 2096977 180 mm
MFT-FOX VT 200 M 6,5 2096979 200 mm
ANCHORS D=11mm MFT-FOX VT 140 M 11 2096974 140 mm
MFT-FOX VT 160 M 11 2096976 160 mm
MFT-FOX VT 180 M 11 2096978 180 mm
MFT-FOX VT 200 M 11 2096980 200 mm
MFT-FOX VT LargeOrder Description Item No. LengthDIRECT FASTENING and SCREWS D=6,5 mmMFT-FOX VT 220 L 6,5 2096981 220 mm
MFT-FOX VT 240 L 6,5 2096983 240 mm
MFT-FOX VT 260 L 6,5 2096985 260 mm
MFT-FOX VT 280 L 6,5 2096987 280 mm
MFT-FOX VT 300 L 6,5 2096989 300 mm
MFT-FOX VT 320 L 6,5 2096991 320 mm
ANCHORS D=11mm MFT-FOX VT 220 L 11 2096982 220 mm
MFT-FOX VT 240 L 11 2096984 240 mm
MFT-FOX VT 260 L 11 2096986 260 mm
MFT-FOX VT 280 L 11 2096988 280 mm
MFT-FOX VT 300 L 11 2096990 300 mm
MFT-FOX VT 320 L 11 2096992 320 mm
18 www.hilti.com
This is an interactive page! Click on the move-back button to jump back to the CONTENT AND OVERVIEW.
BRACKET PROFILE ADJUSTMENT
Profiles "MFT-T 60x80x1,8 6m 60x100x1,8 6m 60x120x1,8 6m
"MFT-T 40x80x1,8 6m
"MFT-L 60x40x1,8 6m
"MFT-L 40x40x1,8 6m"
Brackets A min* A max* A min* A max* A min* A max* A min* A max*
MFT-FOX VT 140 M 6,5/11 141.8 181.8 141.8 161.8 140 181.8 140 161.8
MFT-FOX VT 160 M 6,5/11 161.8 201.8 161.8 181.8 160 201.8 160 181.8
MFT-FOX VT 180 M 6,5/11 181.8 221.8 181.8 201.8 180 221.8 180 201.8
MFT-FOX VT 200 M 6,5/11 201.8 241.8 201.8 221.8 200 241.8 200 221.8
MFT-FOX VT 220 L 6,5/11 221.8 261.8 221.8 241.8 220 261.8 220 241.8
MFT-FOX VT 240 L 6,5/11 241.8 281.8 241.8 261.8 240 281.8 240 261.8
MFT-FOX VT 260 L 6,5/11 261.8 301.8 261.8 281.8 260 301.8 260 281.8
MFT-FOX VT 280 L 6,5/11 281.8 321.8 281.8 301.8 280 321.8 280 301.8
MFT-FOX VT 300 L 6,5/11 301.8 341.8 301.8 321.8 300 341.8 300 321.8
MFT-FOX VT 320 L6,5/11 321.8 361.8 321.8 341.8 320 361.8 320 341.8
* The distance shown is valid for profile thickness of 1,8 mm..
Konsole-Profil Adjustierung / bracket-profile adjustment
A min
A max
s H
s H
19www.hilti.com
MFT-FOX-VT-2L-hangers-undercut anchors
This is an interactive page! Click on the move-back button to jump back to the CONTENT AND OVERVIEW.
PRODUCTS RANGE
Bracket fasteners
HUS-HR
HRD-H
HST-R
HSA-R
HIT-HY 270
HIT-HY 200-A
S-MP 53S
S-MD 51S / S-MD 53S / S-MD 55S
Direct fastening
Brackets
MFT-FOX VT Medium
MFT-FOX VT Large
20 www.hilti.com
This is an interactive page! Click on the move-back button to jump back to the CONTENT AND OVERVIEW.
PRODUCTS RANGE
Profiles
MFT-L
MFT-T
MFT-HP
Profile fastener
S-AD
Accessories
MFT-ISO
MFT-H
Insulation fasteners
Insulation fasteners
21www.hilti.com
MFT-FOX-VT-2L-hangers-undercut anchors
Hilt
i = re
gist
ered
trad
emar
k of
Hilt
i Cor
p., S
chaa
n |
081
7 0
-en
| ©
201
9 |
Rig
ht o
f tec
hnic
al a
nd p
rogr
amm
e ch
ange
s re
serv
ed S
. E. &
O.
Hilti Corporation 9494 Schaan LiechtensteinP +423-234 2111
www.facebook.com/hiltigroupwww.hilti.group