mft 2 and emm

download mft 2 and emm

of 2

Transcript of mft 2 and emm

  • 7/31/2019 mft 2 and emm

    1/2

    Engineering materials & metallurgy andManufacturing Technology II

    1. Guest theory is used for

    1. Brittle materials 2.ductile materials 3. Elastic materials

    4. Plastic materials

    2. Babbit metal is a

    1. Lead base alloy 2.copper base alloy 3. Tin base alloy

    4. Cadmium base alloy

    3. A molecule consisting of one atom is known as

    1. Monatomic 2.diatomic 3. Triatomic 4.polyatomic

    4. The process extensively used for making bolts and nuts is

    1. Hot pressing 2.cold heading 3. Cold peening 4. Extrusion

    5. The material which can be best cut with oxygen cutting process is

    1. Mild steel 2. Brass 3. Copper 4. Aluminum

    6. Shock resisting steels should have

    1. Low wear resistance 2. Low hardness 3. Low tensile strength 4.

    Toughness

    7. For the pipe fitting like elbow, tee, union etc., which of the following is

    preferred?

    1. Pig iron 2. Malleable case iron 3. Spheroidal graphite case iron 4. High

    carbon steel

    8. Malleable cast iron is produced

    1. by adding magnesium to molten 2. By quick cooling of molten case iron

    3. From white cast i ron by annealing process 4. None of these

    9. The cupola is used to manufacture

    1. Cast iron 2. Mild steel 3. High speed steel 4. Cast tool steel

    10. The atomic mass of sulphur is

    1).12 2). 14 3). 16 4) 4 .32

    11. The surface finish factor for a mirror polished material is

    1).0.45 2). 0.65 3). 0.85 4).1

    12. The flux commonly used in brazing is

    1. Zinc chloride 2. Ammonium chloride 3. Rosin plus alcohol 4. Borax

    13. The cold chisels are made by

    1. Cast iron 2. Mild steel 3. High speed steel 4. Cast tool steel

    14. Discontinues chips are formed during machining of

    1. Brittle materials 2. Ductile metals 3. Hard materials 4.soft materials

    15. Ceramics tools are fixed to tool body by

    1. Soldering 2. Brazing 3. Welding 4.clamping

    16. Tool signature consists of ---------- elements

    1. Two 2. Six 3. Seven 4.eight

  • 7/31/2019 mft 2 and emm

    2/2