Metris cabinet specifications - C K Kitchens · Supply of Metris Metris is a technically complex...
Transcript of Metris cabinet specifications - C K Kitchens · Supply of Metris Metris is a technically complex...
-
Metris cabinet specifications
91 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Supply of Metris Metris is a technically complex product including intricate curved carcasses and fascias. It is not suited to on-siteassembly. We strongly advise that Metris kitchens are assembled by your kitchen manufacturer prior to installationto ensure the complete product will function as intended to the benefit of your fitter, and most importantly of all, theend-user. PWS is able to provide full technical details to assist customers in the manufacturing of Metris kitchens. PWS’sability to provide solutions to technical problems arising from on-site assembly is necessarily limited.
Although we always strive to maintain consistency, there may be slight batch-to-batch variances on our paint-to-orderranges and made-to-order veneer products and so it is important that all doors are ordered as one definitive order perkitchen. PWS cannot guarantee an exact colour match between orders placed apart.
Recommended cabinet specifications The following cabinet specifications and accessorisation are recommended in order to both maintain consistency withthe photography utilised in the Metris marketing materials and to create maximum impact for your displays to maximisesales opportunities.
Cabinetry Rigid 18mm carcase (see next page for suggested board materials).
Edging PVC, glass eye or aluminium effect edging.
Hinges Soft close as standard. Recommended hinge movement of 110 degree for standard cabinetry and 165 degree for internal curve frontals such as the Salice or Grass Tiomos product supplied by PWS. Minimum of 3mm mounting plate.
Drawer Systems Soft-close as standard. We recommend stainless steel or glass sided drawer boxes to encourage added value orders.
Wirework Kessebömer Arena Style with White non-slip shelving supplied by PWS.
Further accessorisationPlease refer to the PWS Directory and price list for our comprehensive choice of handles, worksurfaces, sinks & taps,storage, lighting, hinges and further accessory products.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 98
-
Co-ordinating cabinet colours
92Order online at www.pws.co.uk
If your client would prefer their carcasses to be coordinated to their choice of doors, the following boards are suggested:
Door Range Suggested coordinated or contrasted MFC boards
White (matt / gloss) Egger W908 / Egger W1000
Porcelain Egger W1200
Alabaster Egger U104
Almond Egger U100
Light Olive Egger U717
Beige Egger U156
Cashmere Egger U702
Stone Grey Egger U727
Brown Grey Egger U795
Lava Egger U741
Dove Grey Egger U708
Graphite Egger U961
Black Egger U999
Aubergine Egger U330
Chalk Blue Egger W908 / Egger W1000
Feature Woodgrains:
Paint-to-order door colours:
Door Range Suggested coordinated or contrasted MFC boards
Centris Egger H1334
Izari Egger H1137
Textured Matt Sand Egger U156
Textured Wenge Egger H1137
Vinyl door ranges:
Door Range Suggested coordinated or contrasted MFC boards
Fresco / Avant White Egger W908 / Egger W1000
Fresco / Avant Beige Egger U156
Avant Black Egger U999
Avant Earth Pfleiderer U1980, Thermopal U178
The units that feature in the Metris photography are edged with an aluminium edging tape. We use Aluminium 4214 from Ney.
Note: These are suggested board matches only. We strongly recommend that you view samples before making your selection.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 99
-
Small curved door, carcase details
93 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Overall door details, door height 715mm.Please refer to PWS price list for rangeavailability.
Small curved door product code suffix:**CD716Small curved plinth product code suffix:**CPS560SD(to be ordered with door style pre-fix)
A carcase jig is available - CCJIGTIM
Recommended single curved door carcase(wall unit)
Recommended full depth carcase forcurved and 257mm door (base unit)
Reverse side
Front side
Note: The large curve door is not symmetrical and needs to behinged on the 51.5mm flat to stop the door from binding. The51.5mm side is indicated with a sticker and 2 x 3mm pilot holes.Doors that are drilled incorrectly cannot be exchanged or refunded.Due to tolerances on curved doors in some cases the door maybind against the cabinet. To overcome this we recommend reducingthe top and bottom panels of the cabinet by minimum 2mm.
Overall door details, door height 715mm
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 100
-
Large curved door, carcase details
94Order online at www.pws.co.uk
Overall door details, door height 715mm.Please refer to PWS price list for rangeavailability.
Large curved door product code suffix:**CD715X447.5Large curved plinth product code suffix: **CPS560(to be ordered with door style pre-fix)
Overall door details, door height 715mm
Recommended full depth carcase Recommended fully curved end carcase
Recommended single curved door carcase
A carcase jig is available - CCJIG
Hinged on this side Hinged on this side
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 101
-
Internal curved door to suit 900x900mmbase cabinet, carcase details
95 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Internal curved door to suit a900x900mm base cabinet. Please referto PWS price list for range availability.
Internal curved door product codesuffix: **ICB900Internal curved plinth product codesuffix: **ICCPS900(to be ordered with door style pre-fix)
A carcase jig is available - ICJIG900
Overall door details, door height 715mm
Internal curve door to suit 600x600mm wall cabinet,carcase details
Recommendedcarcase dimensions
A carcase jig is available - ICJIG600
Recommendedcarcase dimensions
Reverse side
Front sideHinged onthis side
Overall door details, door height 715mm
Internal curved door to suit a 600x600mm wallcabinet. Please refer to PWS price list for rangeavailability.
Internal curved wall door code suffix: **ICW600Internal curved cornice code suffix: **ICCS600(to be ordered with door style pre-fix)
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 102
-
S-shaped door, carcase details
96 Order online at www.pws.co.uk
‘S’ shaped curved door suitable for use inboth base and wall unit situations. Pleaserefer to PWS price list for range availability.
‘S’ Shape door product code suffix:**SCD716‘S’ Shape plinth product code suffix:**SP1200(to be ordered with door style pre-fix)
A carcase jig is available - SSCJIG (for 600mm unit)A carcase jig is available - SSCJIG2 (for 1200mm unit)
Overall door details, door height 715mm
Recommended base carcase dimensionsRecommended wallcarcase dimensions
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 103
-
S-shaped curved drawer fronts, carcase details
97 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
The S-shaped curved drawer fronts areavailable in selected door ranges. Please refer to PWS price list for range availability.
‘S’ Shape 3 drawer pack, 720x800mm: **CDPS800S-Shape 3 drawer pack, 720x1000mm: **CDPS1000S-Shape 3 drawer pack, 720x1200mm: **CDPS1200(to be ordered with door style pre-fix)
A carcase jig is available - SSJIG800 (for 800mm unit)A carcase jig is available - SSJIG1000 (for 1000mm unit)A carcase jig is available - SSCJIG2 (for 1200mm unit)
Overall drawer details, drawer height 139 & 283mm
Recommended wall carcase dimensions
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 104
-
Concave doors to suit 1200x1200mm Curved island and matching plinths
98Order online at www.pws.co.uk
Concave curved doors and matchingplinths are available for use in1200x1200mm curved islands or1200x1200mm fitted curve corner units (2 concave doors and 1 concave plinth isrequired per 1200x1200 carcase).
Concave door code suffix: **CONCAVEConcave plinth code suffix: **CPSCAVE
Overall door dimensions (door height 715mm)Two doors required per 300mmextended section
Recommended cabinet dimension (Island)
Overall plinth dimension (plinth height 150mm)One plinth required per cabinet
The plinth is designedto sit 45mm in from thefront edge of the cabinet
Recommended cabinet dimension (corner)
Carcase jig - MWJIGCAVE
Hinged on this side
Reverse side
Front side
Note: The backpanel dimensionsshown are just an example, asthese sizes can varydepending oncabinet construction.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 105
-
99 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Convex panels & matching plinths
Convex panels and matching plinths areavailable for use on 1200x1200mm curved islands(2 convex panels and 1 convex plinth are requiredper 1200x1200mm curved unit).
Convex panel product code suffix: **CONVEXConvex plinth product code suffix: **CPSVEX(to be ordered with door style pre-fix)
Recommended cabinet dimension (Island)
Carcase jig - MWJIGVEX
The plinth is designed to sit 45mm behindthe front edge of the cabinet
Panels can be attached to the cabinet byfixing strips of timber/board to the back ofthe panel, which are the same length as theinternal height of the cabinet, then screwfixing into them through the top and bottomof the cabinet.
Alternatively the panels can be biscuit jointedto the top and bottom of the cabinet.
Overall plinth dimension (plinth height 150mm)One plinth required per cabinet
Overall panel dimensions (door height 715mm)Two panels required per 300mmextended section
Strips of timber/board
Note: The back panel dimensions shown above are just an example,as these sizes can vary depending on cabinet construction.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 106
-
Convex 900 door and plinth to suit 300mm extendedpeninsular unit & recommended cabinet dimensions
100Order online at www.pws.co.uk
Convex ‘900’ doors and matching plinths are used on a300mm deep extended cabinet to increase the depth ofa 1200 x 1200mm curved island from 600mm deep to900mm deep. 2 x Convex 900 doors and 1 x convex 900plinth are required per 300mm section. Two 300mmsections are required to extend one full 1200x1200curved island unit.
Convex 900 door code suffix: **CONVEX900Convex 900 plinth code suffix: **CPSVEX900(to be ordered with door style pre-fix)
Recommended cabinet dimensions
Dividing18mmMFC panel
Centre ofradius
Plinth dimensions (plinth height - 150mm)One required per 300mm extended section
Door dimensions (door height - 715mm)Two doors required per 300mm extended section
300mm extended peninsular unit
Carcase jig - MJIGEXTPEN
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 107
-
101 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Curved doors to suit 600mm deep Quadrantcurved cabinet
The 600mm quadrant curved cabinet ishalf of a standard 1200x1200mm curvedunit (each cabinet requires one concavedoor and one convex panel).
Concave door code suffix: **CONCAVEConvex panel code suffix: **CONVEX(to be ordered with door style pre-fix)
Recommended cabinet dimensionsfor Quadrant curve to suit1200x1200mm island
CONVEX
CONCAVE
Overall Convexpanel dimensions,door height715mmOne panel per unit
Overall concave door dimensions, door height 715mmOne door per unit
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 108
-
102Order online at www.pws.co.uk
Curved doors to suit 900mm deep Quadrant curved cabinet
Recommended cabinet dimensionsfor Quadrant curve to suit1200x1200mm island
The 900mm quadrant curved cabinet is half ofa standard 1200x1200mm curved unit with asingle extended 300mm deep section on theback. Each cabinet requires one concave doorand two convex 900 doors.
Concave door code suffix: **CONCAVEConvex panel code suffix: **CONVEX900(to be ordered with door style pre-fix)
CONVEX900
Overall concave doordimensions, doorheight 715mmOne door per unit(handed options).
CONCAVE
Convex door dimensions, doorheight - 715mm Two doors required per cabinet
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 109
-
103 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Concave drawer pack to suit 1200mmx1200mmcurved island and fitted curve corner unit
Concave drawer fronts come in a pack of 3 (1 x 139mm& 2 x 283mm) to suit a 1200x1200mm curved island orfitted curve corner unit. See PWS price list for rangeavailability.
Concave drawer set code suffix: **CCDP1200(to be ordered with door style pre-fix)
Drawer dimensions (drawer height - 1x 139mm & 2x 283mm) Three drawer fronts in a set to suit a720mm high base cabinet
The drawer fronts come with fixing blocksattached to the back to allow drawer sides (suchas Nova Pro Inox sides) to be attached.
Note: A pilot hole is on the back of the drawer frontin the middle. This is to indicate where the basepanel support connector (CDBPSC) can be fixed.
Note: Curved drawers are subject totolerance which can result in drawerwidth variances. Extra support can beprovided by using base panelconnectors (product code: CDBPSC).The connectors work on a cam anddowel principle. A pilot hole is pre-drilled on the back of the drawerfronts to indicate where the dowelconnector is fixed. The front andbottom of the base panel are thendrilled for the dowel to slide throughand meet the cam which can betightened. See drilling positions to theright of page
Base panel supportconnectors
Installation measurements
Product code: CDBPSC
Front
Front
X = front overlay at bottom
Bottom
Front
X
(X+8)
1.5x45˚
21
ø15
13
ø10
ø8812.5
16
Assemble front and bottom panel
Tighteneccenter
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 110
-
Recommended cabinet dimensions for concave drawer packs
104Order online at www.pws.co.uk
A dividing panel is required so the middledrawer front has something to buttagainst. This is especially importantwhen using electronic openingmechanisms (such as Sensomatic) asbuffers fixed to the drawer front needsomething to hit against
Recommended dimensions forpeninsular/island cabinet to suitflat drawer back panels
Recommended dimensions forfitted cabinet
Recommended dimensions forpeninsular/island cabinet to suit curveddrawer back panels
Fixing position forelectronic mechanismsbehind curved drawerback panel.
Centre screw hole on fixingbrackets needs to be positioned456mm back from the centre of thecurved front edge of the cabinet.
Fixing brackets,top and bottom
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 111
-
105 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Concave wall doors and cornice/lighting pelmetto suit 1200x1200mm curved wall unit
Recommended cabinet dimensions for concave wall doors
Note: We recommend using Salice C2A7T99 hinge andBAVGL09/16 mounting plate on the middle door. Standard hingeand mounting plate can be used on the two side doors.
Carcase jig for centre Concave wall cabinet - MJIGCENWALLCarcase jig for left and right hand Concave wall cabinet - MJIGL/RWALL
Concave wall doors and matching cornice/ lighting pelmet are available for use on 1200x1200mm curved wall units.3 concave wall doors are required per1200x1200mm unit (doors to be orderedindividually).
Concave wall door code suffix: **WCONCAVEConcave cornice/lighting pelmet code suffix: **CCSCAVE(to be ordered with door style pre-fix)
Moderncornice/lightingpelmet
Concave wall doordimensions(door height – 715mm)
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 112
-
Handleless carcase details
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 113
-
Aluminium rail profiles
107 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
GPW3900 Profile for wall cabinets, 3900x19.6x20mm
GPCWS300SD Wall curved profile for 300x300 Curved door
GPCWSIC600 Wall curved profile for 600x600 Concave wall cabinet
GPCWSCAVE Wall curved profile pack for 1200 Concave wall cabinet, 3pce set
GPM4100 Mid profile for drawers, 4100x73x26
GPCMSCAVE Curved concave mid profile for drawers to suit 1200x1200 cabinet
GPMIN90 Mid profile, internal corner joint 90°
GPMEND End caps for drawer profile, pair, lh/rh
GPT4100 Top profile for doors, 4100x56.5x27.2
GPCTSCAVE Curved concave top profile to suit 1200x1200 cabinet
GPCTSVEX Curved convex top profile to suit 1200x1200 cabinet
GPCTSVEX900 Curved convex top profile to suit 1500x1500 cabinet
GPCTS560SDL Curved top profile for 300x560 curved base cabinet, left hand (can be cut down for 300x 300 applications)
GPCTS560SDR Curved top profile for 300x560 curved base cabinet, right hand (can be cut down for 300x 300 applications)
GPCTS560L Curved top profile for 410x430 curved base cabinet, left hand (size inc 150 pull out)
GPCTS560R Curved top profile for 410x430 curved base cabinet, right hand (size inc 150 pull out)
GPCTIC900 Curved top profile for 900 x 900 Concave corner base cabinet
GPCTS600L Curved top profile for 600 'S' Shaped door L/H base cabinet
GPCTS600R Curved top profile for 600 'S' Shaped door R/H base cabinet
GPTEX90 Top profile, external corner joint 90°
GPTIN90 Top profile, internal corner joint 90°
GPTEND End caps for top profile, pair, lh/rh
GPTJOINT Mid Joint section for top profile
Top rail profiles Mid rail profiles
Wall rail profiles
Vertical profiles for larders/appliances
GPV2250MID Vertical profile (intermediate), 2250x66.6x42mm, trim to size
GPV2250END Vertical profile (lateral), 2250x48.3x42mm trim to size
GPV2250APP Vertical profile (for appliances), 2250x30x42mm, trim to size
Securing brackets for top and mid railsGPFIXING Securing brackets for top and mid
supports, black, pk 2 (sold in box quantities of 50)
Range content
Aluminium rail profiles are available for handleless kitchen designs featuring either the Tomba chamfer handlelessdoor ranges or in conjunction with non-chamfer slab door ranges in Metris (see page xx for details on using railprofiles for handleless cabinet applications with non-chamfer slab door ranges).
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 114
-
Aluminium rail profiles
108Order online at www.pws.co.uk
Top rail profile for doors
57.5
34
684.5
720
900
56.5
32
57.5
422.5
37
18mmcabinettop panel
R5
27.2
27
Routing cabinet detail
Overall cabinet dimensions
Rail profile
Worktop
Top Rail Profile (GPT4100)
CabinetTop Panel
Securing Brackets(GPFIXING)
Door/drawer
Fitted rail detail
The top rail profile for base unit doors/drawers is availablein straight lengths of 4.1m (GPT4100) and in set curvedsections (see previous page).
Single straight rail lengths are cut down to size (using acircular chop saw) to fit the requested number of cabinets.
Securing brackets to fit rail profiles to cabinets and mustbe ordered seperately in sets of 25 pairs (GPFIXING) - see page 111 for fitting details.
A range of joints and end caps are also available for topand mid rail profiles - see pages 112-113 for more details.
Top rail profile and cabinet details
See page 111 for details on fitting rail profiles to cabinetswith securing brackets (GPFIXING).
Scr
ew p
ositi
ons
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 115
-
Aluminium rail profiles
109 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Mid Rail Profiles
73
73
3220.5
20.5
26
R5
R5
37
27
280
309.5
73
160
160
325
870
150
900
57.5
280
309.5
73
325
325
870
150
900
57.5
Routing cabinet detail Rail profile
The mid rail profile for base unit drawers is available instraight lengths of 4.1m (GPM4100) and in a curved section forthe concave drawer pack in 1200x1200mm cabinets(GPCMSCAVE).
Single straight rail lengths are cut down to size (using acircular chop saw) to fit the requested number of cabinets.
Securing brackets to fit rail profiles to cabinets and must beordered seperately in sets of 25 pairs (GPFIXING).
An internal corner joint (GPMIN90) and end cap (GPMEND)are available seperately - see pages 112-113 for fitting details.
Mid rail profile and cabinet details
Cabinet
Door/drawer
Trim (GPM4100)Securing Brackets(GPFIXING)
Door/drawer
Fitted rail detail
57.5 34
34
34
34 34
34
122
467.5
73
160
490
870
150
900
Scr
ew p
ositi
ons
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 116
-
Aluminium rail profiles
110Order online at www.pws.co.uk
Rail profiles for dishwasherapplications
Worktop
Securing Brackets(GPFIXING)
Dishwasher Door/drawer
Trim
Fitted rail detail
89
min. 90max. 220*
100
53
598550
815-875*
The top rail profile (GPT4100) can be used whenplanning a dishwasher into base cabinets. A 815-875mm fully integrated dishwasher needs to be usedfor this application and will allow for sufficient heightadjustment to sit under the rail.
Dishwasher / cabinet details
Undermounted oven applications
A top rail profile can not be used in conjunctionwith an under-mounted oven. Rails must stop oneach side of the appliance. They can be finishedwith GPTEND & GPMEND end caps. Dependingon the design of the oven, end panels will need tobe fitted either side of the appliance and the railprofile terminated against the panel.
Metal brackets (supplied with dishwasher)should be fixed to the outer face of adjacentcabinets. Please Note: an additional bracingbaton may be required to the rear of themachine to help reduce movement.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 117
-
Aluminium rail profiles
111 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Securing brackets for top and mid rail profiles
Routing cabinet detail for top profile
73
3220.5
20.5
R5
R5
37
26
Routing cabinet detail for mid profile
Securing brackets (GPFIXING) are required to fitboth top and mid rail profiles to cabinets and mustbe ordered seperately to the rail profiles in sets of25 pairs.
Fitting top rail profiles
Fitting mid rail profiles
1. Router cabinet gable ends for top rail profile and mark screw positions
2. Screw securing brackets into place 3. Slide ‘H’ connector into runner on back of rail trim, sit rail on routed gable ends and slide connector to clip into the securing bracket and hold rail in place.
2. Screw securing brackets into place 3. Slide ‘H’ connector into runner on back of rail trim, sit rail on routed gable ends and slide connector to clip into the securing bracket and hold rail in place.
1. Router cabinet gable ends for mid rail profile and mark screw positions
GPFIXING
32
Scr
ew p
ositi
ons
57.5
422.5
37
R5
27
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 118
-
Aluminium rail profiles
112Order online at www.pws.co.uk
Top profile internal corner joint 90º (for use with GPT4100)
Mid joint section for top profile (for use with GPT4100)
Joints and end caps for top rail profiles
End caps top profile, pair, lh/rh (for use with GPT4100)
GPTEND (L/R pair)
GPTJOINT
When applying a corner post or internal corner doors, a top internal corner joint is required for two top profiles torun into. The internal corner joint section is supplied with two screws which when in position secure the joint to the rail profiles.
End caps can be used when top rail trims come to an end (e.g. against a wall or endpanel next to appliances). A screw is supplied to attach the end cap firmly to the rail.
A mid joint section is available to hide joints in certainapplications where two top rail profiles meet (e.g. whena straight rail profile meets a curved rail section).
Please note: When using mid joints, a 5mm spacing must be taken intoaccount when cutting down the rail profiles that are being joined at either side.
Front view
Rear view
5mm
Please note: When using endcaps, a 2mm spacing mustbe taken in to account (whencutting down the trim).
GPINT90
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 119
-
Aluminium rail profiles
113 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Joints and end caps for top and mid rail profiles
End caps for drawer profile, pair, lh/rh (for use with GPT4100)
Mid profile internal corner joint 90º (for use with GPT4100)
GPMIN90
Top profile external corner joint 90º (for use with GPT4100)
GPTEX90
Please note: When using end caps, a 2mmspacing must be taken in to account.
An external corner joint is available when running top rail profiles around an island or corner. The external corner jointis supplied with two screws, which when in position, secure the joint firmly to the rail profile.
When joining two mid rail profiles in a corner application a mid profile internal corner joint is required for two midprofiles to run in to. The internal corner joint is supplied with two screws which when in position secure the joint to therail profiles.
End caps can be used when mid rail trims come to an end (e.g. against a wall or end panelnext to appliances). A screw is supplied to attach the end cap firmly to the rail.
GPMEND
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 120
-
Aluminium rail profiles
114Order online at www.pws.co.uk
Profiles for wall cabinets
Door
Trim (GPW3900)
Routed Groove
Cabinet
Wall rail profileRouting cabinet detail Fitted rail detail
7.5
7.5
3
18
8
19.6
8
20.8
20.8
Cabinet
Base panel
20
The base panel of the wall unit needs to be set back20.8mm to accommodate the rail profile within theoverall depth of the cabinet.
A groove (3.2mm high, 8mm deep) must then berouted into the base panel using slotting cutters.
Rail profiles for wall units are available in straight lengths (GPW3900) as well as curved rail sections. Single straightrail lengths are cut down to size (using a circular chop saw) to fit the required number of cabinets.
Fitting wall rail profiles
GPW3900 GPCWS300SDGPCWSIC600GPCWSCAVE
Trend C143X1/4TC 3.2mm (recommendedslotting cutters)
The rail profile then slots into the routed groove(clear silicon adhesive should be used to bind therail with the panel).
Cabinet
Fitted rail profile
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 121
-
Aluminium rail profiles
115 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Vertical profile (intermediate)
Vertical profile (intermediate), 2250x66.6x42mm, trim to size
GPV2250MID
Rail application between two opening doors Fitting detail
Cabinet Cabinet
Spacer
Trim
Appliance/door
32
4x 30mmscrews
4x 30mmscrews2
0 2032
12 12
30
Please note: Try to position the screw holes in the cabinet sothey are concealed (such as behind hinge plates) when internalcomponents are added.
When joining cabinets in larder runs, a spacer is needed atthe back to maintain the 30mm void created by the trimprofile. The spacer is screw fixed to the cabinets from theinside of each cabinet.
The vertical intermediate profile (GPV2250MID) can be used in the scenario where two openingdoors meet or where an integrated appliance, suchas a fridge/freezer is installed. Due to the widthand placement of the trims, a 30mm spacer isrequired at the back between the two cabinets tomaintain the space created by the trim. The frontof the gables on the cabinets need to be set backby 12mm for the trim to overlap behind the doors.The trim is securely fixed to the cabinets with 4x30mm countersunk screws.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 122
-
Aluminium rail profiles
116Order online at www.pws.co.uk
Vertical profile (lateral)
Vertical profile (lateral), 2250x48.3x42mm trim to size
GPV2250END
Rail application between openingdoor and end panel/post or hingeside of adjacent door
Fitting detail
Cabinet
Featureendpost
Cabinet
Spacer
Endpost
Trim
Door
4x 60mmscrews
Adhesive
201232
61
The vertical lateral profile (GPV2250END) can beused in the scenario where you have an openingdoor to one side, and an appliance, such as anoven, in the adjacent cabinet or are terminating arun with an end panel. Due to the width andplacement of the trims, a 30mm spacer is requiredat the back between the two cabinets to maintainthe space created by the trim. The front of thegables on the cabinets need to be set back by12mm for the trim to overlap behind the door. Thetrim is securely fixed to the cabinets with 4x 60mmcountersunk screws.
Please note: Try to position the screw holes in the cabinet sothey are concealed (such as behind hinge plates) when internalcomponents are added.
When joining cabinets in larder runs, a spacer is needed atthe back to maintain the 30mm void created by the trimprofile. The spacer is screw fixed to the cabinets from theinside of each cabinet.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 123
-
Aluminium rail profiles
117 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Vertical profile (for appliances)
Vertical profile (for appliances), 2250x30x42mm, trim to size
GPV2250APP
The vertical appliance profile (GPV2250APP) can beused between two appliance housing units, whereyou have two ovens sat side by side, or where theoven housing meets an end panel. Due to the widthand placement of the trims, a 30mm spacer isrequired at the back between the two cabinets tomaintain the space created by the trim. As theappliance trim profile has no detailed ends, thegable ends are not to be set back. The trim sitsflush with the front of the gable ends and the trim issecurely fixed to the cabinets with 4x 60mmcountersunk screws.
Rail application between hingeddoor side and end panel/post
Fitting detail
Featureendpost
Cabinet
Spacer
Endpanel
Trim
Door
4x 60mmscrews 32
61
Please note: Try to position the screw holes in the cabinet sothey are concealed (such as behind hinge plates) when internalcomponents are added.
When joining cabinets in larder runs, a spacer is needed atthe back to maintain the 30mm void created by the trimprofile. The spacer is screw fixed to the cabinets from theinside of each cabinet.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 124
-
Using rail profiles with non-chamfer doors
118Order online at www.pws.co.uk
In addition to the Tomba handleless chamfer door, aluminium rail profiles can be used with non-chamfer slab doors inthe Metris collection, enabling handleless kitchen designs for all finishes including Inzo, Textured, Centris, IzariFresco/Avant vinyl ranges. However, there are some design modifications to consider when planning base units.
Handleless rail options with non-chamfer doors on wall units and talllarder/appliance housings
The handleless cabinet configurations for wall units and talllarder/appliance housings are based on standard door anddrawer size combinations. This means that all door ranges inthe Metris collection can be planned to work with thehandleless rail profiles on wall and tall units without anychange to cabinet sizes.
Handleless rail options with non-chamfer doors on base units
When using non-chamfer slab doors with railprofiles on base units, a change in cabinet height isrequired as follows:
Base unit cabinet configurations with thealuminium rail profile are based on non-standarddoor and drawer sizes to accommodate the railsand frontals within a standard 720mm highcabinet (e.g. 684.5mm high door, plus 35mm railhigh rail instead of a 715mm high door).
When using rail profiles on base units with non-chamfer slab (e.g. Inzo, Textured, Centris, Izari,Avant, Fresco), the cabinet height must beamended (a suggested height is 750mm). Thisleaves a 35mm space between the top of thedoor/drawer and underneath the worktop. If youwant to maintain a standard height worktop, thecabinet height can be kept at 720mm whilstreducing the height of the plinth and cabinet legsadjusted accordingly.
Please note: When planning kitchens with rail profiles and non-chamfer slab doors, you should consult with your trademanufacturer to discuss the most appropriate cabinitry specification for your specific design requirements.
Suggested cabinet height whenusing rail profiles and standardheight, non-chamfer Metris doors
750mmcabinetheight
35mm profile
715mm door
150mm (or120mm tomaintainstandardworktop height)
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 125
-
Carcase details for curved rail profiles
119 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
GPCTS560SDLGPCTS560SDR
Tomba small curved doorand rail profile
Please refer to page 111 for details onrouting cabinets for top rail profiles.
Overall door details door height 684.5mm
Recommended full depthcabinet for small curved doorand 257mm door (base unit)
108.5
323
300.5
R192
323
Door dimensions
Top Rail (GPCTS560SDL cut down to size)(GPCTS560SDR cut down to size)
22.5
27
300
108.5
300
27
18
110 Top Rail Right hand rail shown(GPCTS560SDR)
560
260
300
27
110
R190
The small curved door in Tombacomes as unhanded, however thecorresponding rail profile is availablein left and right handed options to suita 300x560 curved base unit with 260filler unit. When applying the rail to asingle small curved unit, the rail willneed to be cut to size to suit 300x300curved cabinet.
Door
HXCD686B
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 126
-
Carcase details for curved rail profiles
120Order online at www.pws.co.uk
The large curved door in Tomba comes in leftand right handed options with correspondingrail profiles supplied to suit a 410x430 largecurved base unit including 150 pull-out. Whenapplying the rail to a single large curved unit,the rail will need to be cut to size to suit 410x430curved cabinet.
Overall door details, door height 684.5mm(right hand door shown - HXCD684X447.5L)
Recommended single curved door carcase
Recommended fully curved end carcaseRecommended full depth carcase
HXCD684X447.5LHXCD684X447.5R
GPCTS560LGPCTS560R
Tomba large curved door andrail profile
22.5
27
53
R2
R357
R357
R357
R357
R2
R358
71.5
1827
73
Hinged on this side
Hinged on this side
Hinged on this side
Hinged on this side
Hinged on this side
Top Rail(GPCTS560L cut down to size)(GPCTS560R cut down to size)
Top Rail Right hand rail shown(GPCTS560R)
150mm wall pull-out - KW150C
452
430
430430
1827
410
560
410
150
73
5353
53
73
18
73
430
410432
51.5
Please refer to page 111 for details onrouting cabinets for top rail profiles.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 127
-
Carcase details for curved rail profiles
121 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
The S-shaped Tomba door and S-shaperail profile are available in left and righthanded options. When applying themid joints, you need to allow for the5mm joint to sit between the twoprofiles, this will require the twoprofiles being cut down by 2.5mm.
Tomba ‘s’ shaped curveddoor and rail profile
HXSCD684L
GPCTS600LGPCTS600R
Recommended base carcase dimensions
1200
657
18
600
477.5
Centre point
Top Rail Right hand (GPCTS600R)
Top Rail Left hand(GPCTS600L)
543
Centre point57
560
664.5
2727
R600 R582
597
55.5
R606
55.5
22.5
122.5 R2
R577.5
Overall drawer details, door height 684 .5mm
720mm
HXSCD684RPlease refer to page 111 for details onrouting cabinets for top rail profiles.
GPTJOINT
To rail mid-joint(GPJOINT)
Left hand door shown(HXSCD684L)
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:43 Page 128
-
Carcase details for curved rail profiles
122Order online at www.pws.co.uk
HXICB900LHXICB900R
GPCTIC900
Overall door details, door height 684.5mm Carcase for internal curved base door
Tomba Internal curved900x900mm door and rail profile
HXICW600LHXICW600R
GPCWSIC600
Overall door details, door height 715mm Carcase for internal curved wall door
Tomba Internal curved 600x600mmwall door and rail profile
Back
Front
Hinged on this side
108
67º
900
560
109.5
27
27
Rail (GPCTIC900)
Left hand door shown(HXICB900L)
900
560
109.5
22.5336.5
336.5
108
R228.5
R208.5
R230.5
600
300
109.5
20.88
20.88
Rail (GPCWSIC600)
600
300
109.5
R190.5
22.5
296.5
296.5
22.5
Back
FrontHinged on this side
108
108
22.5
R188.5
R168.5
67º
The Internal curved 900x900mm base door in Tombais available in left and right handed options with a
corresponding (unhanded) rail profile. Please refer topage 111 for details on routing cabinets for top rail profiles.
The Internal curved 600x600mm wall door inHandleless comes in left and right handedoptions with a corresponding (unhanded) rail
profile. Please refer to page 114 for details onrouting cabinets for wall rail profiles.
Left hand door shown(HXICW600L)
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 129
-
Carcase details for curved rail profiles
123 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
HXCONCAVELHXCONCAVER
GPCTSCAVE
Tomba Concave door withrail profile on 1200x1200mmcurved island unit
Overall door dimensions, door height 684.5mm(Two doors required per cabinet)
Reverse side
Back oftrim profile
Back panels
Front side
12001200
560
1027
56027
22.5
1200
R641
10
18
81º
77º
77º
78º
78º
81º
451
451
451
451
23ºR2R
638
R615.5
478
Hinged onthis side
Top rail profile(GPCTSCAVE)
The concave curved 1200x1200mm doorin Tomba is available in left and righthanded options with a corresponding(unhanded) rail profile.
Recommended cabinet and concave trim profile dimensions (island)
Overall plinth dimensions, plinth height 150mm(One plinth required per cabinet)
18mm Cabinet blocks foradditional curved rail support
1200
702
R702R686
Reverse side
Front side
702
16
56045 18
18
R641
18
18560
1200
Plinth
Rail(GPCTSCAVE)
The plinth is designed tosit 45mm in from the frontedge of the cabinet
Please refer to page 111 for details onrouting cabinets for top rail profiles.
18mmMaterial
50
Securingbracket
18
Recommended cabinet dimensions (corner)
2x 18mm routed cabinet material blocks are neededto attach the centre of the rail profile with securingbrackets to support the centre of the rail sagging.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 130
-
Carcase details for curved rail profiles
124Order online at www.pws.co.uk
Please refer to page 111 for details onrouting cabinets for top rail profiles.HXCONVEX
Overall plinth dimension, plinth height 150mmOne plinth required per cabinet
Recommended cabinet and convex rail profile dimensions (island)
Back oftrim profile
Back panels
1200
1200
560
27
560
2745
1200
R641
10
18
18 81º
77º
77º
78º
78º
81º
451
451
451
451
Top rail profile(GPCTSVEX)
917.2
Reverse side
Front side
R2R2
18
R1202
R1202
1155
R1155
R1139
Reverse side
Front side
1155
16
The plinth is designed tosit 45mm behind the frontedge edge of the cabinet
GPCTSVEX
Convex panels and matching plinths areavailable in Tomba in (unhanded) sizes.Two panels and one plinth section arerequired for one 1200x1200mm curvedisland unit.
Overall panel dimensions, door height 684.5 mm (Two panels required per cabinet)
Tomba convex panel and railprofile on 1200x1200mmcurved island unit
Please note: The back panel dimensions shown above are just anexample, as these sizes can vary depending on cabinet construction.
Strips oftimber/board
Panels can be attached to the cabinet by fixing strips of timber/board to the backof the panel, which are the same length as the internal height of the cabinet, thenscrew fixing into them through the top and bottom of the cabinet. Alternatively thepanels can be biscuit jointed to the top and bottom of the cabinet.
2x 18mm routed cabinetmaterial blocks are needed toattach the centre of the railprofile with securing bracketsto support the centre of therail sagging. See page 123.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 131
-
Carcase details for curved rail profiles
125 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
HXCONVEX900
Tomba Convex door and railprofile on 300mm extendedcurved cabinet
571.5
R1524.5
R1520
22.5
R1439
R1455
16
Front
Back
1113.61
Back
Front
Centreof radius
Convex 900 top rail profile(GPCTSVEX900)
Back of trim profile
Back of trim profile
Convex door
Convex door
Convexdoor
Convexdoor
Concavedoor
Concave top railprofile(GPCTSVEX900)
Concavedoor
Plinth
Convex door dimensions,door height - 684.5mm
45º1200
R641
R641
R1200
R1200
R1500
860560 300
45
18
27.2 27
R1200
R1500
27.2
Dividing18mmMFC panel
GPCTSVEX900
Convex doors and matching plinths areavailable in a Tomba finish and are used on a300mm deep cabinet to extend 1200x1200mmcurved island units to 1500x1500mm. Twoextended 300mm sections (including fourconvex 900 doors and two plinth sections) arerequired to extend one full 1200 unit.
Extended 300mm peninsula cabinet dimensions
Full 1500x1500mm cabinet dimensions
Plinth dimensions,plinth height - 150mm
Back of trim profile
Back of trim profile
Please refer to page 111 for details onrouting cabinets for top rail profiles.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 132
-
Carcase details for curved rail profiles
126Order online at www.pws.co.uk
The 600mm quadrant curved cabinet is halfof a standard 1200x1200mm curved islandunit and requires one concave door (handedoptions) and one convex panel. Full sizeconcave and convex rail sections must becut down to size. If using a mid joint section,an extra 5mm gap is needed to allow spacefor the mid joint (see page 112) .
Carcase details for Tombadoors and rail profiles tosuit 600mm deep Quadrantcurved cabinet
Recommended cabinet dimensionsfor Quadrant curve to suit1200x1200mm island
Convex top railprofile(GPCTSVEX)
27.2
R1200
5604527.2
18
R641Plinth
Back ofrail profile
Concavedoor
Concave top rail profile(GPCTSCAVEcut down to size)
27.2
a
Hinged on this side
Front side
478
22.5
R2
R2
23º
917.2
Reverse side
Front side
R2R2
22.5
R1202
R1202
Convexpanel
GPCTSCAVE
GPCTSVEX
HXCONVEX
HXCONCAVELHXCONCAVER
Overall Convexpanel dimensions,door height684.5mmOne panel per unit
Overall concave door dimensions, door height 684.5mmOne door per unit (handed options)
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 133
-
Carcase details for curved rail profiles
127 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Carcase details for Tombadoors and rail profiles tosuit 900mm deep Quadrantcurved cabinet
Recommended cabinetdimensions for Quadrant curveto suit 1200x1200mm island
Convex 900top rail profile(GPCTSVEX900)
27.2
R1500
Back oftrim profile
860
45 560 3002727
18
R641Plinth
R1200
Back oftrim profile
Concavedoor
Concave top rail profile(GPCTSCAVEcut down to size)
27.2
Convexdoor
Convexdoor
The 900mm quadrant curved cabinet is halfof a standard 1200x1200mm curved unitwith a single extended 300mm deep sectionon the back. Each quadrant cabinet requiresone concave door (handed options) and twoconvex 900 doors. Convex and concave railsections are used (concave rails must be cutto size). If using a mid joint section, an extra5mm gap is needed to allow space for themid joint. (see page 112)
GPCTSCAVE
GPCTSVEX900
571.5
22.5
Back
Front
Convex door dimensions, door height - 684.5mmTwo doors required per cabinet
HXCONVEX900
Overall concave doordimensions, doorheight 684.5mmOne door per unit(handed options).
Reverse side
Hinged on this side
Front side
478
22.5
R2
R2
23º
HXCONCAVELHXCONCAVER
Please refer to page 111 for details onrouting cabinets for top rail profiles.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 134
-
Carcase details for curved rail profiles
128Order online at www.pws.co.uk
Drawer dimensions, drawer height - 2x 160mm and 1x 325mm
Please Note: The drawer fronts come with fixingblocks attached to the back to allow drawer sidesto be attached.
22
80
Carcase details for Tomba concavedrawer pack and rail profiles on1200x1200mm curved cabinet
The Concave drawer pack in Tomba is supplied ina set (2x 160mm, 1x 325mmm) to suit a 720mmhigh base cabinet. Corresponding rail profilesneed to be ordered seperately.
An electronic open mechanism can beused with the curved drawer pack. Youwill need to use a flat back panel. Aminimum space of 538mm is requiredbetween the fixing blocks and the backof the cabinet for an electronic openmechanism to be used.
A pilot hole is on the back of the drawer front in themiddle. This is to indicate where the base panelsupport connector (CDBPSC) can be fixed.SEE PAGE 103 FOR FULL INFORMATION
GPCTSCAVE GPCMSCAVE
Please refer to page 111 for details onrouting cabinets for top rail profiles andpage 112 for mid rails.
1200
1200Extra 18mm cabinet packerrequired
560
R2
115.34 115.39
115.34 115.39
80
5.873
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 135
-
Carcase details for curved rail profiles
129 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Recommended dimensions for 1200x1200mmcurved peninsular island to suit drawer pack
Recommended dimensions for 1200x1200mm curvedpeninsular island cabinet tosuit angled drawer back panels
1200
1200
560
560
45º
45º
45º
45º
R1200
R641
1200
1200
Base
pan
el
560
560
Recommended cabinet dimensionsfor Tomba concave drawer pack tosuit 1200x1200mm curved cabinet
A dividing panel is required so the middle drawer front hassomething to butt against. This is especially important whenusing an electronic open mechanism as buffers fixed to thedrawer front need something to hit against.
Recommended dimensions for 1200x1200mmfitted corner cabinet to suit drawer pack
560
45º
45º
1200
560
R641
1200
415mm
2x 18mm routed cabinet material blocks are need to be attachedunder the top panel and on the dividing panel with securingbrackets to support the centre of the rail sagging. See page 123.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 136
-
Carcase details for curved rail profiles
130Order online at www.pws.co.uk
GPCWS300SD
Carcase details for 300x300mmsmall curved wall rail and door
Recommended single curved doorcarcase (wall unit)
110
Wall profile(GPCWS300SD)
300
20.88
18R190
110
20.8 8
300
720mm
HXCD716W
Overall door details, door height 715mm
317.5
299.5
R191
317.5
299.5 22.5
108.5
108.5
A small curved door (HXCD716W) and railprofile (GPCWS300SD) are available inTomba for 300x300mm wall units as wellas a top curved cornice (HXCCS300SD).
Please refer to page 114 for details onrouting cabinets for wall rail profiles.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 137
-
Carcase details for curved rail profiles
131 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Carcase details for 1200x1200mmTomba concave wall door and rail
750
750
300
1200
820.8
450
409.32
419.42
R152
Wall curved profile(GPCWSCAVE)
Left hand door shown(HXWCONCAVEL)
Right hand door shown(HXWCONCAVER)
Left hand door shown(HXWCONCAVEL)
820.8
3001200
R901
R152
R2
Hinge onthis side
Hinge onthis side
Hinge onthis side Back
Front
437
R921.5
R899
Centre of radius
450
22.5
R2
GPCWSCAVE (set of 3)
The Tombas concave concave curvedwall door comes in handed options(HXWCONCAVEL or HXWCONCAVER).Three individual doors must beordered per cabinet. Thecorresponding rail profile(GPCWSCAVE) comes in three pieces.
720
Recommended cabinet dimensions for1200x1200mm concave wall units
HXWCONCAVELHXWCONCAVER
Overall door details, door height 720mm
Please refer to page 114 for details onrouting cabinets for wall rail profiles.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 138
-
Handleless feature end panels
132Order online at www.pws.co.uk
Tomba feature base end panel, L-shaped design, 900x650x50mm
Tomba feature wall end panel,L-shaped design, 950x350x50mm
The base panel end feature in Tombacan be used to continue the trim andchamfered door profile around the endof base units and islands. (Please notepanels are handed).
Panels can be cut down to size in depthand height and re-edged with 2mmedging tape (PET2HW).
The wall feature end panel in Tombais used to continue a chamfered finisharound the end of a run of wall units.
Panels can be cut down to size and re-edged with 2mm edging tape(PET2HW).
900
950
The end panels are supplied with fillers tosuit 900 tall wall application. However, thetop filler can be removed and repositionedif the panel is reduced in height.
Screw fix the end panel to the cabinet byscrewing from the inside of the cabinet intothe fillers.
HXFEP900X650LHXFEP900X650R
HXFEP950X350
The base end panels are supplied with fillersattached. Screw fix the end panel to thecabinet by screwing from the inside of thecabinet into the fillers.
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 139
-
Handleless feature end panels
133 North: Telephone: 01325 505599 | Fax: 01325 505598 | South: Telephone: 01325 505588 | Fax: 01325 505589
Tomba peninsular feature endpanel, 684.5x452x22mm
Tomba wave island feature endpanel, 684.5x608x50mm
HXFEP684X452
HXFEP684X608
The Peninsular end panel in Tomba is usedon a 150mm pull-out unit at the end of aPeninsular Curve island.
18mm cabinet top rail
684.5
HXFEP684x452150mmpull-out
Screw fix the end panel tothe cabinet by screwingfrom the inside of thecabinet in to the end panel.It is recommended that an18mm top rail is added tothe cabinet to furthersupport the end panel andtop rail profile.
The wave island endpanels are supplied withfillers attached. Screwfix the end panel to thecabinet by screwingfrom the inside of thecabinet in to the fillers.
684.5
HXFEP684x608
HXFEP684x452
The wave island feature end panel is used tocontinue the rail and chamfered door profilearound the end of a 1200x1200mm curved uniton a 600mm deep island (such a wave curve).
Metris_technical_manual_INNERS-14_Layout 1 07/02/2014 10:44 Page 140
-
Contents
OVERVIEW
What is Metris? 02Signature design themes 03Paint to order door ranges 04Ordering paint to order ranges 05Feature door ranges 06Vinyl door ranges 07Feature Metris range content 08
CREATING THE LOOK
Feature curved cabinets 10Fitted Curve island 11Peninsular Curve island 12Extended Peninsular Curve island 13Wave Curve island 14Extended Wave Curve island 15Crescent Curve island 16Contour Curve island 17Reef island 18100mm feature end post 19TV unit 20Pegaso larder mechanism 211200mm pantry 22-25
SIGNATURE DESIGNS - SET BREAKDOWNS
Wave Curve 27-30Peninsular Curve 31-32Fitted Curve 33-38Contour Curve 39-40Crescent Curve 41-44Reef 45-46Wing island 47-48Question Mark 49-50‘W’ island 51-52Linear designs 53-54Linear handleless 55-56Ripple 57-58
DOOR MATRIX
Inzo, Avant and Fresco 59Tomba Handleless 59Textured 60
CARCASE DETAILS
Core cabinet configurations 61-75Handleless cabinet configurations 76-89Cabinet specifications 90-92Curved carcase details 93-105Handleless carcase details 106-133
Copyright
Ordering MetrisThe easiest way to order Metris is on Tradezone – www.pws.co.uk. Alternatively, you cantelephone or fax your order to us at:Tel: 01325 50 55 55 | Fax: 01325 50 55 00.
Further informationPlease refer to the PWS Directory and price list for our comprehensive choice of Handles,Worksurfaces, Storage, Lighting, Hinges and further accessory products.Alternatively, please contact your area sales manager for further information.
Metris®, Wave Curve®, Peninsular Curve®, Fitted Curve®, Geometric® and Rich Mix® are registered trade marks of PWS Distributors Ltd.
Seamless™, Contour Curve™ and Crescent Curve™ are trade marks of PWS Distributors Ltd.
Peninsular Curve, Fitted Curve and Wave Curve are registered designs of PWS Distributors Ltd(Registered Community Design numbers 001039176-0001, 001039176-0004 and 001039176-0002 respectively).
Copyright Notice© Copyright of PWS Distributors Ltd, 2014. Neither thisbrochure nor any image/text within it may be reproducedwithout our consent
Colour ReproductionWe take great care in the photography of productsillustrated. Due to variations between photographic andprint processes, colours and shades may differ slightly fromthe actual product supplied.
Marketing PolicyIn line with our company policy continuous improvement,we reserve the right to alter, amend or re-specify any product illustrated without prior notice.
www.metriskitchens.co.uk
tech_manual_covers_Layout 1 07/02/2014 10:26 Page 2
2.Metris-Tech-Manual-Cabinet-Details-cover.pdf2.Metris-Tech-Manual-Cabinet-Details-cover.pdf2.Metris-Tech-Manual-Cabinet-Details.pdf1.pdf2.pdf3.pdf4.pdf5.pdf
2.Metris-Tech-Manual-Cabinet-inners.pdf1.pdf2.pdf3.pdfpages 1-8_4col.pdfpgs 9-140 INNERS_bw.pdf
4.pdf5.pdf