2015 Product Overview

www.csunitec.com

MetalworkingSurface PreparationSurface Finishing

Concrete and MasonryDust Collection Systems

Hot Work Zone Tools

ElectricPneumaticHydraulic

Magnetic Drills, Cutters & Reamers Electric • Air • Hydraulic

• Manual or automatic feed

• Lightweight – from 24 lbs.

• Drill holes up to 5-1/8" dia.

• Electric, air and hydraulic

• Models available with swivel baseand adjustable x/y positioning

• Variety of annular cutters and accessories

• Fast, portable, burr-free cutting of metalplates, pipes, profiles and more… withoutcoolant or deburring

• Dust collection ports

• Electric and pneumatic

• Cut up to 5-1/8" dia.• Twist Drill up to 1-3/4" dia.

• Tap up to 1-5/8" dia.

Highest Power-to-Weight Ratios • Superior Magnetic Strength

Dry Cutting Metal SawsDry cut metaland plasticswithoutcoolant ordeburring

Metalworking

Electric, Air &

HydraulicModels

Drill holesup to

5-1/8" dia.

Super Hand-Held DryCut Saw• 12-5/8" diameter, cut up

to 3/8" thick steel plate and 4-3/4" depth in othermaterials

• Largest portable dry metalcutting saw on the market

Dry Cut Miter Saw• Portable 10" saw for

precise 45˚ cuts leftand right

Premium SuperDry Cutter• 14" dia. with 6"

depth of cut at 90˚

2 1-800-700-5919 • 203-853-9522 • www.csunitec.com

Steel, Stainless Steel, Aluminum and Carbon Fiber

LargestHand-heldDry-cutting

Saw

• Shadow-free, uniform finishes

• Ideal for finishing stainless steel, steel,nonferrous metals and plastics

• Hollow-core abrasives save time and money

• Electric or air

• Manual and automatic bevelingand deburring machines

• Ideal for deburring, chamferingand straightening edges onplates and pipe

Shadow-free,uniform brush,matte andmirror finishes

Kits and awide rangeof abrasivesare available

Surface Finishing

1-800-700-5919 • 203-853-9522 • www.csunitec.com 3

Metal – Steel, Stainless, Aluminum and more

• 7" rotary sander for coated/sealed/filled woodfloors, doors, window casings, stairs and more

• Large sanding disc, powerful motor and highspeeds improve operator productivity

• 9" rotary sander with variable speedfor smoothing drywall seams quicklyand cleanly before painting,plastering or decorating

• Lightweight unit and special handledesign enable operator to work forlong periods of time – evenoverhead

Wood and Drywall

Dust-free workingwhen connected to an industrial vacuum

Diamond Core Drills and SawsWet and Dry • Electric, Hydraulic and Air

• Drill holes up to 18" dia. in floors, walls and ceilings

• Fast drilling of reinforced concrete, concrete, brick, block and stone

• 5/8" and 1-1/4" standard thread connections

• Drills are equipped witha "slip clutch"

Portable WaterPump System• Water recycling

and slurrycontainmentvacuum

Hydraulic and Air Core Drills

• Hydraulic and air core drills

• Hand-held and rig-mounted

• Holes up to 12"with stand

• High-speed diamond core drillfor holes up to 2-5/8"

• Ideal for stone, tile, ceramic,porcelain, stoneware, glass,reinforced concrete and more

2-speed wet/dry

diamond core drill

Concrete and Masonry

Wet

4 1-800-700-5919 • 203-853-9522 • www.csunitec.com

Drill dowel,anchor and thruholes in tile,

natural stone andconcrete – quickly

and cleanly

• Diamond circular saws and multi-use saws forwet/dry cutting of granite, tile, concrete and more

• Wall slotters and wall chasers for channels

Tile Saw

WallChasers

Chain Saws and Cut-Off Saws• Hand-held and walk-behind air concrete saws

• Cut concrete, wet or dry

• Ideal for floor sawing, trenching, road repairand more

• 14" to 20" blade capacity

• Powerful vacuums forconcrete dust

• Self-cleaning filter system

• With or without HEPA filtration

• Wet or Dry

• Heavy-duty hand-held andwalk-behind concrete grinders

• 5", 7" and 9" models

• Remove paint, epoxy, glue andother hard coatings

• Dust extraction ports

• Air and hydraulic concrete chain sawsfor reinforced concrete

• Air chain saw for ductile iron

• Straight cuts throughconcrete up to 15" deep

AIRPower

F4 Diamond ChainsAIR Power

Diamond Grinders, Vacuums & Mixers

Concrete and Masonry

1-800-700-5919 • 203-853-9522 • www.csunitec.com 5

• Heavy-duty mixing drills

• Mix heavy materials such as epoxy, mortarsand cement, as well as paint and more

• Portable mixing stations

Steel & Concrete Surface PreparationCS Unitec's surface preparation tools feature models with vibration reduction technology.Vibration damping components offset the hammer vibration when the tool impacts theworkpiece, reducing the risk of vibration-related injury.

Vibro-Lo™Vibration Reduction

Technology

Hand-Held Construction Scabblers (Pneumatic)• Low-Vibration Single- and Triple-Head • Roughen, reduce and level concrete• Prepare surfaces for coatings and finishes

Heavy-Duty Hand-Held Scabblers• Low-Vibration Single- and Triple-Head Scabbling Hammers• Optional vacuum shroud for dust extraction

6 1-800-700-5919 • 203-853-9522 • www.csunitec.com

Dust Collection Vacuums(Pneumatic • Electric)• Wet/Dry air-powered models

collect dry dust/debris and liquids

• Electric-powered wet/drymodels with HEPA filtration

Low-Vibration Steel Deck Hammer (Pneumatic)• Fracture and reduce scale, corrosion and thick coatings

in minutes, reducing blast media costs• Ideal for ship decks, tank bottoms, bridge decks, floating

platforms and more

Hand-Held Scaling Hammers (Pneumatic)• Low-Vibration Single- and Triple-Head Scaling Hammers• Remove thick scale, heavy corrosion, hard coatings, etc.

Hand-Held Scarifiers – Rotopeen™(Pneumatic • Electric)• Ideal alternative to small-area shot

blasting – clean/prepare steel andconcrete surfaces

Low-Vibration Needle/ChiselScalers (Pneumatic)• Vibro-Lo™ Needle/Chisel Scalers

remove coatings, corrosion andother accumulated materials

• Clean and stress-relieve weldseams and joints

Multi-Headed Floor Scabblers (Pneumatic)• Vibro-Lo™ 11-head model for concrete keying and laitance

removal; less-aggressive to protect substrate below• 5-head model for fast concrete removal and demolition

when leveling high spots, texturing and roughening andbreaking down hard coatings prior to blast cleaning

Floor Scarifiers / Planers (Electric • Pneumatic • Gas)• Ideal for the most demanding surface preparation and

material removal applications• Remove rust, scale and adhesives from steel and concrete

Long-Reach Chisels / Scrapers /Scalers (Pneumatic)• Lengths from 2' to 6'; chip,

scrape and descale with one tool

Air and Hydraulic Tools for Oil, Gas and Energy Industries

Safety Tools

For use in Ex and Hot Work ZonesFor use in Ex and Hot Work Zones

ATEX ClassifiedAir and Hydraulic Tools

ATEX ClassifiedAir and Hydraulic Tools

• Portable pneumatichacksaws for on-sitecutting of pipe up to 24"OD and structural steel

• Electric and hydraulicmodels also available

AirOperated

9"Cutting Capacity

4-3/4"

Cutting

Capacity

Call for ATEX details

• Pneumatic SDS Plus andSDS Max rotary hammer drills

• Hydraulic models available

Ex and Hot Work Zones

1-800-700-5919 • 203-853-9522 • www.csunitec.com

Non-sparking, Non-Magnetic

• High-quality non-sparking and non-magnetic safety tools

• Aluminum Bronze (AlBr) or Copper Beryllium (CuBe) alloy

• Hammers, wrenches, sockets, wedges, chisels and more

• For Ex and hot work zoneswhere hazardous, flammable or combustible materials are present

Electric, Air& HydraulicModels

• Pneumatic reciprocating saws for cuttingsteel and pipe up to 6" dia.

• Electric and hydraulic models available

• Pneumatic drilland air operatedmagnet

• Up to 2-1/16"dia. holes

• Electric andhydraulic modelsalso available

• Portable air band saws cutup to 8-1/2" round or 9" x 8"

• Electric and hydraulicmodels also available

• Explosion-proofaxial fans 12" to24" diameter

• Pneumatic andhydraulic impact

wrenches

• Air circular saws, 7-1/2" and9" dia., cut 90˚ and 45˚anglesup to 3-1/4" deep

7

CS Unitec, Inc. specializes in industrial power tools and safety tools for construction and industry.Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company invented the first pneumatic portableband saw. CS Unitec has added to its list of industry firsts with the widest range of portable magnetic drills and hand-held concrete coredrills. The line also includes surface preparation tools for metal, concrete and masonry, air, electric and hydraulic portable band saws,reciprocating saws, hack saws, nut runners, rotary hammer drills, rolling motors, non-sparking safety tools, portable mixers and dustextraction vacuum systems.

CS UNITEC, Inc. 22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email info@csunitec.com • www.csunitec.com

ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2014, CS Unitec, Inc., 10-14-5M

View product demonstrationsat www.csunitec.com.

… the power of innovation!®

For tool specifications and ATEX and Ex Zone information, visit www.csunitec.com.

Call 1-800-700-5919 or 203-853-9522 to request any of the catalogs shown.

View demo videos atwww.csunitec.com

Portable Magnetic Drills:Magnetic Drills & Accessories

Hand-held Drills and Drive UnitsNut Runners

Hammer Drills and more

Surface Finishing Tools:High-performance tools and

accessories for grinding, sanding,polishing, deburring and bevelingstainless steel, steel, nonferrous

metals, wood and more

Non-Sparking Hand Tools:Non-sparking Hand Tools

Power Tools for use in Ex Zones,ATEX Zones and Hazardous

Environments

Portable Saws:Hacksaws, Reciprocating Saws,Band Saws, Chain Saws, Cut-off

Saws and more

Concrete Tools:Surface Preparation Tools,Concrete Grinders, Dust

Collection Systems, DiamondCore Drills, Air Concrete Saws

and more

Metalworking Tools:Surface Preparation Tools, DustCollection Systems, Dry Cutting

Portable Saws, Portable MagneticDrills, Bridge Reamers and more

Portable Mixers:Portable Mixing Machines for

Mortar, Concrete, Plaster,Flooring Adhesives, Grout,

Coatings, Paint, Self-LevelingCompounds and more

Concrete & Masonry Tools:Power tools for the professionalcontractor to drill, cut, grind andsmooth concrete, masonry, wood,drywall and more – includes dust

collection tool systems

EIBENSTOCK’S EXCLUSIVE AGENT FOR NORTH AMERICA

ALL PRODUCTS ARE AVAILABLE THROUGH