Metalworking Tools for Marine, Bridge, Pipeline and

2 • 1-800-700-5919 • Visit our Web site at www.csunitec.com

Metalworking Tools for Marine, Bridge,Pipeline and Process Industries

CS Unitec's Trelawny™ line of surface preparation tools features many Vibro-Lo™ models.These models include integrated vibration reduction technology to operate with 7x lessvibration than standard models. Vibration damping components offset the hammer vibrationwhen the tool impacts the workpiece, reducing the risk of vibration-related injury.

Hand-Held Scaling Hammers (Pneumatic) p. 5

• Low-Vibration Single-Head and Triple-Head Scaling Hammers

• Remove thick scale, heavy corrosion, hard coatings and more

• Optional spark-resistant copper beryllium cutter heads

Low-Vibration Needle/Chisel Scalers (Pneumatic) p. 6-9

• Vibro-Lo™ Needle/Chisel Scalers remove coatings, corrosion and other accumulated materials

• Clean and stress-relieve weld seams and joints

• Variety of needles and chisels, including options for use in hazardous areas and Ex zones

Vibro-Lo™Vibration Reduction

Technology

Long-Reach Chisels / Scrapers / Scalers (Pneumatic) p. 10

• Available in lengths ranging from 2' to 6'; chip, scrape and descale with one tool

Surface Preparation Tools & Dust Collection Vacuums

Low-Vibration Steel Deck Hammer (Pneumatic) p. 11

• 11 heads and 33,000 blows per minute• Fracture and reduce scale, corrosion and thick coatings in minutes,

reducing blast media costs

• Ideal for ship decks, tank bottoms, bridge decks, floating platforms and more

Floor Scarifiers / Planers (Electric • Pneumatic • Gas) p. 12

• Ideal for the most demanding surface preparation and material removal applications

• Remove rust, scale, paint, adhesives and more from steel and concrete

Trident Neptune Flexible Shaft Deck Descalers (Air • Electric) p. 13

• Rapidly remove scale, rust, paint and other unwanted deposits on ship decks and othermetal surfaces

Hydraflex Hold Cleaning Gun Kit (Pneumatic) p. 14

• Reach up to 100 ft. away with high-pressure water jet

• Clean hold areas on bulk carriers and cargo vessels of all sizes

• Wet/Dry air-powered models collect dry dust/debris and non-flammable liquids

• ATEX classified, antistatic vacuum and air-supply hose; optional HEPA filter

• Electric-powered wet/dry models with HEPA filtration

Hand-Held Scarifiers – Rotopeen™ (Pneumatic • Electric) p. 4

Dust Collection Vacuums (Pneumatic • Electric) p. 15

• Ideal alternative to small-area shot blasting

• Clean and prepare steel and concrete surfaces

• Available with 3M's Rotopeen™ 'C' flaps, star cutters and beam cutters

Vibro-Lo™Vibration Reduction Technology



CS Unitec's Trelawny™ Rotopeen™ hand-held scarifiersare the ideal alternative to small-area shot blasting forcleaning and preparing steel and concrete surfaces. They utilize 3M's brand of Rotopeen™ 'C' flaps to offer a captive shot method of surface preparation.

• Pneumatic and electric models

• Integrated dust shroud for dust and debriscollection, as well as cleaner, safer removal oflead-based paints and contaminated particles

Peening Preparation Tool (PPT) – idealalternative to small-area shot blasting

Pneumatic Hand-Held Scarifiers

194.0205

194.C205

194.0405

194.C405

30

30

30

30

2700

2700

2700

2700

3.5

6.0

3.1

4.6

ModelNumber

CFM @90 PSI

Speed(RPM)

2"

2"

4"

4"

CuttingWidth

'C' Flaps

Star Cutters

'C' Flaps

Star Cutters

These models are compatiblewith Star Cutters, Beam Cutters

and Rotopeen™ 'C' Flaps

CuttingMedia

7.5

11.5

9

13.25

Weight(lbs.)

VibrationLevels m/s2

Electric Hand-Held Scarifiers

195.1217

195.1220

110V

220V

2000

2000

3.6

3.6

ModelNumber Motor Power

Speed(RPM)

2"

2"

CuttingWidth

'C' Flaps

'C' Flaps

CuttingMedia

10

10

Weight(lbs.)

VibrationLevels m/s2

Applications include:• Aggressive removal of alkyds, adhesives,lead-based paints, mastics, coatingscorrosion and more• Cleaning and preparing steel andconcrete surfaces

Electric Model 195.1220 2" cutting width with Rotopeen™ 'C' flaps

Pneumatic Models 194.0405 and194.C405, 4" cutting width

See page 15 for dustextraction systems.


Hand-Held Scarifiers - Rotopeen™ Air • Electric

Star Cutter Beam Cutter 3M™ Rotopeen™ 'C' FlapP/N 312.S200 P/N 312.R200 P/N 312.MRPC

Hand-Held Scarifier Accessories

HEAVYSCALING

LIGHTBURNISHING

Nuclear

Ships decks

Construction

Factory Floors

Swimming Pools

Bridge Maintenance

Pipeline Maintenance

––––

Non-slip coatings

Plaster removal

––––

Adhesive removal

Sealant removal

––––

––––

––––

Ceiling / wall paint removal

Floor marking removal

Adhesive removal

––––

––––

Radioactive waste removal/capture

General paint removal

Ceiling / wall paint removal

Floor marking removal

––––

Paint / sealant removal

Protective coating removal

Aggressive removalof thick coatings

Removal of hard coatings, lessaggressive than star cutter

Removal of light paint and rust to bare metal finish

Star CutterCuttingWidth

2"4"

QuantityRequired

80160

Beam CutterCuttingWidth

2"4"

QuantityRequired

56112

Rotopeen™'C' Flap

CuttingWidth

2"4"

QuantityRequired

612

CS Unitec's Trelawny™ line of pneumatic hand-heldscaling hammers are ideal tools for the removal of thickscale, heavy corrosion and hard coatings. Areas ofapplication include pipes, ship decks, oil platforms,storage tanks and bridge structures.

• Single-head scaling hammer includes Vibro-Lo™ vibrationreduction technology

• Optional spark-resistant copper beryllium replacement headsreduce risk of explosion in potentially hazardous areas

• Detachable taper fit cutter head reduces cost of replacementand extends piston life

Remove thick scale, heavycorrosion and hard coatings

Applications Include:• Pipes• Ship Decks• Oil Platforms• Storage Tanks• Bridge Structures

Pneumatic Hand-Held Scaling Hammers

Cruciform


Technology

5• 1-800-700-5919 • Visit our Web site at www.csunitec.com

CS Unitec's Trelawny™ Single-HeadHand-Held scaler operates with 7x lessvibration than standard models. This toolutilizes vibration damping components tooffset the hammer vibration created whenthe head impacts the workpiece.

Pneumatic

Hand-Held Scaling Hammer AccessoriesPart No.

426.5351

606.5303

426.5352

612.5301

For Model Numbers

151.5100, 196.5095and 153.5300

151.5110 and 153.5310

151.5105 and 153.5305

All models shown below

TCT CruciformCutter Head

Copper Beryllium(CuBe) Cruciform Cutter Head

Bush Cutter Head

Common TaperedPiston

Vibro-Lo™


Low-VibrationSingle Head

Triple Head

TCT Cruciform Piston

Bush Hammer Piston

CuBe Cruciform Piston



Bush Hammer Piston

CuBe Cruciform Piston

151.5100

151.5105

151.5110

196.5095

153.5300

153.5305

153.5310

5.5

5.5

5.5

5.5

8

8

8

3000

3000

3000

3000

9000

9000

9000

7

7

7

7

7

7

7

88.1

88.1

88.1

88.1

88.1

88.1

88.1

6.8

6.8

6.8

3.7

13.4

13.4

13.4

19" x 6"

19" x 6"

19" x 6"

19" x 5.5"

19" x 6"

19" x 6"

19" x 6"

DescriptionModelModelNumber

Weight(lbs.)

Dimensions(LxH)

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

SingleHead

Vibro-Lo™


Copper Berylliumfor use in potentiallyexplosive areas

H

H

H

Bush

VL223

VL203

CS Unitec's Trelawny™ line of Low-Vibration needle/chiselscalers offer high performance and low vibration forgreater productivity and improved operator comfort.Ergonomically designed with low maintenance and quickchange tooling option.

CS Unitec's Trelawny™ Vibro-Lo™ line of Needle/ChiselScalers operate with 7x lessvibration than standardmodels. These tools utilizevibration damping componentsto offset the hammer vibrationcreated when the needles/chiselsimpact the workpiece.

• Integrated Vibro-Lo™ vibration reduction technology

• Lightweight, easy to handle

• Optional dust shroud for dust and debris collection

• Tool-free needle changeover

• Converts to chisel scaler in seconds

High power with low vibration –equipped with Vibro-Lo™

Applications include:• Cleaning and stress-relieving weld seams and joints• Removing coatings, corrosion and other accumulated materials• Texturing concrete• Splitting, chipping, pointing and brick raking

VL303

Needle Scalers andChisel Scalers convert in

seconds with optionalhead or when purchased

as a Kit. See followingpage for Kit information.

6

Low-Vibration Needle/Chisel Scalers Vibro-Lo™Vibration Reduction

Technology

Dust CollectionShroud

CS Unitec's Vibro-Lo™ Needle/Chisel Scalers are a safer, more effectivemeans of removing coatings, corrosion and other accumulated materials.Vibro-Lo reduces the risk of vibration-related injury.

Chisel for light surface marking

Flat for light treatmentand polishing effect

Pointed for veryhard scale


Stainless Steel for usein applications wherecorrosion or humidity is aproblem, such as foodprocessing industry

See page 9 for thefollowing types ofneedles:

Chisels for Vibro-Lo™ Chisel Scalers

Dust Collection Shroud for Vibro-Lo™ Needle Scalers

Shank Length Width Application

Pistol

VL223 Needle Scaler

VL223 Needle Scalerwith dust shroud

Chisel Part Number

Square

SquareCranked End

Square

Square

Square

7"

7"

7"

7"

10"

2"

3/8"

3/4"

2-1/2"

3/4"

Spark resistant Aluminum Bronzefor use in hazardousareas

Weld flux and thick coating removal

Weld splatter removal

Wide flat chisel forthe removal of rustor peeling paint

Flat chisel for weldsplatter and sand cast cleaning

704.3110

704.3205

704.3101

704.3103

704.3107

DescriptionGripModelNumber

Needle Quantity/Diameter

Weight(lbs.)

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

Optional Dust Shroud for Needle Scalers – for use with dust extraction vacuums.Model VL223 Needle Scaler – Order Dust Shroud P/N 418.2003Model VL203 Needle Scaler – Order Dust Shroud P/N 418.2003Model VL303 Needle Scaler – Order Dust Shroud P/N 418.3003

VL223 Kit – Order P/N 199.2113VL203 Kit – Order P/N 199.2105VL303 Kit – Order P/N 199.3103

CS Unitec offers Vibro-Lo™ Needle/Chisel Scaler Kits, each supplied with the Needle Scaler, 3mm needles, a chisel holder, anvil and a 3/4" blade chisel.

Vibro-Lo™ Needle Scalers

Vibro-Lo™ Chisel Scalers Vibro-Lo™ Needle/Chisel Scaler Kits

CS Unitec offers a drop protection kit for our Vibro-Lo™ Needle/ Chisel Scalers. Protect your investment when working at heights or in applications where dropping/ losing the tool is likely, including: offshore platforms and rigs, bridges/ scaffolding, vessels and ships.

For VL223 and VL203Order P/N 720.2003*

For VL303Order P/N 720.3003** Safety clip and line not supplied

Drop Protection Kit

Inline

Pistol

VL223 Chisel Scaler

VL203 Chisel Scaler

VL303 Chisel Scaler

199.2213

199.2203

199.3203

6.5

7

9.5

2400

2400

3000

4

4

5.5

76.3

76.3

78.2

3.69

3.33

3.7


Weight(lbs.)

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

Inline

H

H

199.2103

139.2103

199.2003

199.2303

199.3003

199.3005

19 / 3mm

19 / 3mm

19 / 3mm

19 / 3mm

28 / 3mm

28 / 3mm

5.25

5.25

6

6

7.75

7.75

2400

2400

2400

2400

3000

3000

4

4

4

4

5.5

5.5

90.7

90.7

90.7

90.7

109.5

109.5

2.56

2.56

2.75

2.75

2.3

2.3

VL203 Needle Scaler


VL303 Needle Scaler


CS Unitecoffers a fullline of non-sparking,non-magneticchisels andsafety handtools forhazardousareas and Exzones.Contact usfor details.

See page 15 for dustextraction systems.



Technology

Low-Vibration Needle/Chisel Scalers


Standard Needle/Chisel Scalers

Chisel for light surface marking

Flat for light treatmentand polishing effect

Pointed for veryhard scale


Stainless Steel for usein applications wherecorrosion or humidity is a problem, such as the food processing industry

See page 9 forneedles:

Chisels for Standard Chisel Scalers1/2" Square Connection

Shank Length Width Application

Pistol

SemiPistol

1B Needle Scaler1B Chisel Scaler


Square

SquareCranked End

Square

Square

Square

Square

Square

7"

7"

7"

7"

10"

8"

7"

2"

3/8"

3/4"

2-1/2"

3/4"

1/4"

Moil Point

Spark-resistant Aluminum Bronzefor use in hazardous areas

Weld flux and thick coating removal

Weld splatter removal

Wide flat chisel for the removalof rust or peeling paint

Flat chisel for weld splatterand sand cast cleaning

Mortar removal for repointingbrick work

Concrete chipping

704.1110

704.2105

704.1101

704.1103

704.1107

704.1106

704.1112


Needle Qty./Dia.

Weight(lbs.)

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

Dust Collection Shroud for Standard Needle ScalersOptional Dust Shroud for Needle Scalers – for use with dust extraction vacuums.Model 2B and 2BPG Needle Scalers – Order Dust Shroud P/N 418.2199Model 3BPG Needle Scaler – Order Dust Shroud P/N 418.3039

* 3BPG Chisel Scaler 135.3395 has 5/8" hexagonal chisel holder and is compatible with chisels shown on page 10. All others Chisel Scalers shown above have 1/2" square connection.

Standard Needle and Chisel Scalers

TVS™ Needle Scalers with Integrated Vacuum Shroud

Inline

H

H

12 / 3mmN/A

19 / 3mmN/A

3.53.3

5.754.4

38003800

30003000

3.03.0

5.55.5

110.498.9

113.398.6

8.58.2

9.317.4

123.2199125.2300

133.3199135.3300135.3395

19 / 3mmN/A

28 / 3mmN/AN/A

5.754.5

8.256.26.2

30003000

220022002200

5.55.5

8.08.08.0

113.398.6

114.5105.1105.1

12.622.4

18.925.625.6

131.3099134.3200

141.4099144.4200

28 / 3mmN/A

35 / 4mmN/A

107.5

12.58.2

22002200

18001800

8.08.0

8.58.5

114.5105.1

117.4105.1

2BPG Needle Scaler2BPG Chisel Scaler

3BPG Needle Scaler3BPG Chisel Scaler3BPG Chisel Scaler*



Pistol

2B Needle Scaler


Weight(lbs.)

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

Inline 139.2007 6.4 3000 5.5 98.6 17.4

139.2107

139.3107

6.6

9.9

3000

2200

5.5

8.0

98.6

105.1

22.4

19.9

2BPG Needle Scaler

3BPG Needle Scaler

CS Unitec's Trelawny™ TVS™ Needle Scalers with Integrated VacuumShroud enable dust-free working in hazardous applications when usedwith a dust extraction vacuum (see page 15 for dust collection systems).

Pistol Grip

Semi PistolGrip

Above: Model 1B Chisel Scalerwith Square Cranked End Chisel

for removal of flux

CS Unitec offers afull line of non-sparking, non-magnetic chiselsand safety handtools for hazardousareas and Exzones. Contact usfor details.

Standard Needle Scalers and ChiselScalers convert in seconds with optional

head or when purchased as a Kit.Contact us for more information.

111.1099114.1200

121.2099124.2200

Inline Grip

12.219.9

23.545.2

Chisel Part No.


Available in 3mm flat top only; for use in potentiallyhazardous areas.

Needles

Flat Tip

2mm

2mm

2mm

2mm

2mm

3mm

3mm

3mm

3mm

3mm

3mm

4mm

4mm

4mm

4mm

3mm

3mm

6 x sets of 29 needles



Box of 100 needles

Box of 2000 needles





Box of 100 needles

Box of 1000 needles (180mm long)



Box of 50 needles

Box of 500 needles

Box of 1000 needles 5" long (127mm)

19 x needles 5" long (127mm)

412.1129

412.1151

412.1165

452.1110

442.1107

413.1112

413.1119

413.1128

413.1149

453.1110

443.1107

414.1119

414.1135

454.1105

444.1107

443.1105

443.1115

Flat-tipped needles will reduce markingon metal surfaces and can give apolishing effect. For use on thin gaugemetals and any surface where a lighttreatment is required.2mm needles used on a welded joint produce a similareffect to shot peening, reducing stress in the weld.

Size Description Part #

Chisel Tip

3mm

3mm

3mm

3mm

3mm

3mmConversions:2mm = 0.08"

3mm = 0.12"

4mm = 0.16"

180mm = 7"





Box of 100 needles

Box of 1000 needles

413.2112

413.2119

413.2128

413.2149

453.2110

443.2107

These needles will clean the samematerials as a pointed tip, but will leavelight surface marking


Pointed Tip

3mm

3mm

3mm

3mm

3mm

3mm

4mm

4mm

4mm

4mm





Box of 100 needles

Box of 1000 needles



Box of 50 needles

Box of 500 needles

413.3112

413.3119

413.3128

413.3149

453.3110

443.3107

414.3119

414.3135

454.3105

444.3107

Sharpened to a conical point, these arethe most effective in breaking throughvery hard scale on materials where somesurface indentation is permissible - or where aroughening or keying of the surface is actuallydesirable.


3mm

3mm

3mm

3mm

3mm

3mm

Box of 12 needles

Box of 19 needles

Box of 28 needles

Box of 49 needles

Box of 100 needles

Box of 500 needles

403.1312

403.1319

403.1328

403.1349

453.1310

443.1307


Spark-Resistant Copper BerylliumH

Available in 3mm flat tip form only, to be used inapplications such as refurbishment of food processingmachinery or areas of high humidity where the corrosiveeffect on needles would be prohibitive.Used on decorative concrete surfaces where contamination of thesurface from carbon steel needle is undesirable.

3mm

3mm

Box of 100 needles

Box of 500 needles

453.1207443.1207


Stainless Steel

See page 15 fordust extractionsystems.

CS Unitec's Trelawny™ needles last 10x longer than standard needles. Save time and money with fewer needle changes and less downtime.

All of CS Unitec's Needle Scalers are delivered from stock complete with 180mm long x 3mm diameter chisel tipped high performance needles. Other needle holders are available as accessories for use with 2mm and 4mm diameter needles. We also offer spark resistant needles for use in potentially hazardous areas and Ex zones, as well as stainless steel needles for usein humid areas - such as applications in the food processing industry - where corrosion is a concern.

Standard pack set is one carton of 6 sets. Some models are packed as an individual set in a box.Boxes of 100 qty. needles in a durable, reusable plastic container are available, as well as largerquantities.

Long-Reach Chisels/Scrapers

StandardScalers

LITEScalers

2ft. Chisel4ft. Needle4ft. Chisel5ft. Chisel

4ft. Chisel5ft. Chisel6ft. Chisel

136.3299137.3400136.3499136.3599

136.3497136.3597136.3697

8111112

6.757.58.5

2200220022002200

220022002200

Model DescriptionModelNo.

Weight(lbs.)

4.54.54.54.5

4.54.54.5

841048486

898984

CFM@ 90PSI

Blows per

minute

Noise Leveldb(A)

Chisel Accessories

Needle Scaler Accessories

Scraper Accessories

• Ice• Residue• Adhesive• Asbestos• Linoleum• Carpeting• Plaster

• Mortar• Floor tiles• Metal slag• Rubber coatings• Roofing materials• Chemical spillages• Bituminous products

Applications include removal of:

CS Unitec’s Trelawny™ Long-Reach Scrapersfeature one tool with multiple applications.

• Available in 2', 4', 5' and 6' lengths• Three tools in one – chipper, scraper and descaler• Quick-change chisel release• Low air consumption• Standard and "LITE" models

Chip, scrape and descalewith one versatile tool

Chipping Scraping Descaling

705.1100

705.1101

705.1102

705.1106

705.1112

705.2102

708.1101

9"

9"

8"

9"

8"

8"

1"

2"

1"

4"

2"

4"

4"

1-1/8" comb insert

Spark-resistant aluminum bronzefor use in hazardous areas

Flat chisel for sand cast chipping

Asphalt cutter / paint removal /general chipping applications

Removal of linoleum from floor base

Spark resistant aluminum bronzefor use in hazardous areas

Floor tile removal

Brick cleaning and reclamation (usewith 8" long comb holder 708.1100)

ChiselPart No.

ChiselLength

Blade Width Applications

H

H

All long-reach scrapers are available as needlescalers by changing the scraper/chisel with theneedle attachment P/N 415.3532. See page 9for needles.

Flat

431.3504

431.3508

431.3512

Beveled

431.3904

431.3908

431.3912

439.3504(5 Blades)

439.3508(5 Blades)

439.3512(4 Blades)

439.3524(5 Blades)

439.3528(5 Blades)

439.3522(4 Blades)

Adhesive andpaint build up

removal

Paint andcoatingspillageremoval

Carpet andtile removal

Stubbornadhesiveremoval

Carpet andtile removal

Adhesiveremoval

4"

8"

12"

4"

8"

12"

ScraperAssemblyPart No.

BladePack

BladeWidth

Applications


Long-Reach Chisels/Scrapers/Scalers


Applications Include:• Ship Decks• Tank Bottoms• Bridge Decks• Floating Platforms

CS Unitec's Trelawny™ ScaleForce Eleven Pneumatic Deck Hammer operates with 7x less vibration thanstandard models. This tool utilizes vibration dampingcomponents to offset the hammer vibration createdwhen the heads impact the workpiece.

SF11 Steel Deck Hammer

CS Unitec's Trelawny™ ScaleForce Eleven Pneumatic DeckHammer will fracture and reduce scale, corrosion and thickcoatings in minutes. The machine's low profile body andadjustable handle mean the deck hammer needs only 6"clearance for working under pipes and other constructions.

• Includes Vibro-Lo™ vibration reduction technology

• Optional spark resistant beryllium copper replacement headsto reduce risk of explosion in potentially hazardous areas

• Detachable taper fit cutter head reduces cost of replacementand extends piston life

• Optional vacuum shroud reduces hazardous and nuisancedust when used with TVS approved dust collectors

11 heads deliver 33,000 BPM Fracture and reduce scale, corrosionand thick coatings in minutes – andreduce blast media costs

11 heads provide 33,000 BPM (11 x 3000 BPM)


Technology

SF11 AccessoriesPart No.

426.5351

606.5303

426.5352

612.5301

437.0100

Cruciform Cutter Head

Copper Beryllium (CuBe)Cruciform Cutter Head

Bush Cutter Head

Common Tapered Piston

Vacuum Shroud

Vibro-Lo™

Vibro-Lo™

Vibro-Lo™

ScaleForce Eleven (SF11) Pneumatic Deck Hammer

SF11 w/ CuBeHeads

SF11 w/ DustShroud

159.5910

159.5930

159.5912

ModelNumber

79

79

83

11.1" x 47.6"

11.1" x 47.6"

11.1" x 47.6"

Weight(lbs.)

Dimensions(WxH)

10"

10"

10"

70

70

70

113.1

113.1

113.1

5.76

5.76

5.76

33,000

33,000

33,000

CuttingWidth

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

SF11 w/CruciformHeads

Copper Beryllium for use in potentially explosive areas H

H

Bush Cruciform Optional dust shroud,P/N 437.0100, tocollect dust and debriswhen connected to adust collectionvacuum.

See page 15 for air-powereddust collection vacuum – ATEXclassified for use in Gas Zone 2and Dust Zone 22.

• 1-800-700-5919 • Visit our Web site at www.csunitec.com12

Applications include:• Removal of rust, scale, paint, adhesives and more • Keyed or grooved profiles• Roughing concrete

CS Unitec's Trelawny™ Floor Planers tackle the most demandingsurface preparation and material removal applications. Ideal for theremoval of coatings and corrosion from steel and concrete surfacesto prepare for re-coating. Produce an ideal keyed or grooved profileon concrete for waterproofing and non-slip surface applications.

• Depth control maximizes performance and extends cutter life

• Integrated vacuum connection and hold-to-run handle

• Fully adjustable handlebar for operator comfort

• Electric, pneumatic or gas power

Remove rust, scale, paint, adhesivesand more from steel and concrete

Floor Scarifiers / Planers Electric • Pneumatic • Gas

TFP 200 Floor Scarifiers

320.2004T

320.2012T

14" x 35" x 35"1/8"

Model NumberWeight(lbs.)

220V - 240V, 3 HP 8"

CuttingWidth

Dimensions(WxLxH)

Max CuttingDepth per Pass

TFP 200 Electric

14" x 35" x 35"1/8"165CFM @ 90 PSI, 3.5 HP

Motor Specifications

8"

149

99

TFP 200 Pneumatic

320.2000T 14" x 35" x 35"1/8"Honda GX160 Gas, 5.5 HP 8" 130

TFP 200 Gas

TFP 200 Cutters IndividualCutter

N/A

320.5120

320.3658

320.5500

320.5600

320.5650

320.5500

DrumAssembly

320.9620

320.1020SB

320.1020SS

320.1020ST

320.1020SM

320.1020SM

320.002G

Wire Brushes

Beam Cutters

Star Cutters

Tungsten Carbide Tipped Cutters

Milling Cutters (22mm)

Milling Cutters (11mm)

Tungsten Carbide Tipped Cutters(for grooving)

Cutter Applications:

Wire Brushes are ideal for finishcleaning and polishing on steel; canbe used for light concrete deposit.

Beam Cutters are ideal for lightpaint/corrosion removal, withminimal damage to substrate.

Star Cutters are ideal for theremoval of mastics and rubberizedcoatings.

Tungsten Carbide Tipped Cutters are ideal for aggressiveapplications such as roughing concrete and heavy corrosion removal,as well as grooving roadways for non-slip surface.

Milling Cutters are ideal for the removal of plastic road markingswithout penetrating the surface.

TFP 200Electric

TFP 200Pneumatic

TFP 200Gas

• 1-800-700-5919 • Visit our Web site at www.csunitec.com 13

Trident Neptune Flexible Shaft Deck Descalers

Applications Include:• Removal of scale, rust, paint and other deposits• Preparation of surfaces for priming, painting or coating

Standard equipment includes: 9' x 5/8" flexible shaft; heavy-duty leaf scaling head; 6-cutter scaling head; 6" dia. power brush, spanner set and hand guard.

Trident Neptune Deck Descaler Accessories

Trident Neptune Deck Descalers

Electricw/ Swivel Base

Electricw/ Skid Base

340.490/S

340.TN/50/S

340.TN/100/S

340.TN/S/110

340.TN/S/220

3000

2850

3450

2850

3450

75

75

75

106" x 8.3" x 11.4"

106" x 8.3" x 11.4"

106" x 8.3" x 11.4"

ModelModelNumber

55.077.00

55.077.00

55.077.00

55.077.00

55.077.00

ISSANumber

59 12 81

59 12 41

59 12 42

59 12 41

59 12 42

IMPANumber

68 CFM @ 90 PSI1.5 HP

110V / .75 HP

220V / .75 HP

110V / .75 HP

220V / .75 HP

MotorSpecifications

Weight(lbs.)

Dimensions(LxWxH)

CutterSpeed(RPM)

Pneumaticw/ Swivel Base

6-Cutter Scaling Head Part No: 340.581 ISSA: 55 082 01 IMPA: 59 12 86

Heavy Duty Scaling Head Part No: 340.550 ISSA: 55 078 01 IMPA: 59 12 75

Wire Brushes

Flexible Shaft with Handpiece and Coupling Part No: 340.285 ISSA: 55 077 01 IMPA: 59 12 99

Cutter WheelPart No: 340.332ISSA: 55 082 04IMPA: 59 12 89

ReplacementParts:

ReplacementParts:

Side Plates (2 qty.)Part No: 340.575/2ISSA: 55 082 02IMPA: 59 12 87

Cutter PinPart No: 340.583ISSA: 55 082 05IMPA: 59 12 90

Center BoltPart No: 340.581/AISSA: 55 082 03IMPA: 59 12 88

Chipping LeafPart No: 340.347ISSA: 55 078 06IMPA: 59 12 79

Side Plates (2 qty.)Part No: 340.551/2ISSA: 55 078 02IMPA: 59 12 76

Cutter PinPart No: 340.553ISSA: 55 078 05IMPA: 59 12 80

Center BoltPart No: 340.552ISSA: 55 078 03IMPA: 59 12 77

Spacing Washer (50 qty.)Part No: 340.5849/50ISSA: 55 078 04IMPA: 59 12 78

6" Power BrushPart No: 340.160ISSA: 55 084 03IMPA: 59 12 93


6" Twisted Knot BrushPart No: 340.163ISSA: 55 084 01IMPA: 59 12 91


Crimped Wire Cup BrushPart No: 340.166ISSA: 55 084 07IMPA: 59 12 97


Twisted Knot Cup BrushPart No: 340.167ISSA: 55 084 05IMPA: 59 12 95


CS Unitec's Trelawny™ Trident Neptune Deck Descaler is idealfor the rapid removal of scale, rust, paint and other unwanteddeposits on ship decks and other metal surfaces, leaving areceptive surface for priming/painting or coating application.

• Lightweight and portable

• 9' x 5/8" flexible shaft for wide coverage area

• Motor overheat protection on electric models

• Unique non-corrosive D-coupling with positive locking mechanism

• Two-skid base design keeps unit stable and upright; optional swivel base available

Ideal for rapidly removing scale, rust, paint and other unwanted deposits

• 1-800-700-5919 • Visit our Web site at www.csunitec.com14

Hydraflex Hold Cleaning Gun Kit

Specifically designed for hold cleaning on bulk carriersand cargo vessels of all sizes

The Hydraflex uses a combination of water and compressed air for a powerful,high-pressure jet of water that can reach up to 100 ft. away.

• One-man operation

• Constructed of high-quality, non-corrosivestainless-steel materials to prevent corrosion

• Adjustable air and water pressure control valve

Item Model Part No. ISSA No. IMPA No. Weight (lbs.)

1 Gun 342.HY01 55.085.01 59 07 42 12

2 Tripod 342.HY02 55.085.02 59 07 42 21

3 Water Hose Coupling 342.HY03 – – 4.3(2-1/2" x 2-1/2")

4 Water Hose Coupling 342.HY04 – – 0.75(2-1/2" x 2")

5 Instantaneous Water 342.HY05 – – 0.66Hose Adapter

6 Ball Valve 342.HY07 – – 3.10

7 Base Assembly 342.HY60A – – 14.4

Hydraflex Hold Cleaning Gun Accessories

1

2

6

7

Hydraflex Hold Cleaning Gun Kit

ModelModelNumber

ISSANumber

IMPANumber

70 CFM @ 90 PSI

70 CFM @ 90 PSI

342.HY50

342.HY50T

55.085.00

–

55 07 00

–

42

52

10-18kg

10-18kg

MotorSpecifications

Weight(lbs.)

85 psi

85 psi

WaterPressure

2"

2"

WaterHose

3/4"

3/4"

AirHose

Recoil

StandardKit withoutBase

(includes items1, 2, 3, 4 & 5)

CompleteKit withBase

(includes items1, 2, 5 & 6)

Model CS 1445 H(shown at left)

automatically"pulse" cleans filterswithout interruptingoperation!

• Antistatic vacuum and air supply hose

• ATEX classified* Ex II 2 GcT6 foruse in Gas Zone 2 and Dust Zone 22

• Robust stainless steel construction

• Floor tool kit for general cleaning work

• Double filtration with optional 14"Permaflow filter

• Optional HEPA filter – for collection of hazardous dust

• Disposable paper filter or reusablecloth bag for wet use

• 1-800-700-5919 • Visit our Web site at www.csunitec.com

Collection of dry dust/debris and non-flammable liquidsATEX classified; antistatic vacuum and air-supply hose

Air-Powered Dust Collection Vacuum – KAV 30 AIR

Optional Filter BagsPaper filter bags for CS 1225 and CS 1445 - P/N 416014 (5-pack)Plastic filter bags for CS 1225, CS 1445 and CS 1500 - P/N 421742 (5-pack)Paper filter bags for CS 1500 - P/N 416021 (5-pack)Slurry filter bags for CS 1500 - P/N 420592 (3-pack)

CS 1225 H

CS Unitec's wet/dry dust extraction vacuumsoffer strong 130 CFM air flow and an electromagnetic pulse filter cleaning system to maximize vacuum power and dust collection.

• Ideal for use with power tools• 99.999% HEPA filtration efficiency of particles

down to 0.3 microns; automatic filter cleaning • "Power Take Off" outlet activates the vacuum

ON/OFF from the power tool switch

• Non-HEPA models available, 99.930% filtration efficiency

• Kit available to connect two power tools (P/N 198804)

Electric-Powered Dust Collection Vacuums with HEPA Filtration

"Powertake-off"outlet

HEPA Vacuum SpecificationsCS 1225 H CS 1500 H

Power 11 Amp 11 Amp 11 Amp

Air flow 130 CFM 130 CFM 130 CFM

Tank capacity 6.6 gal. 13 gal. 9 gal.

Weight 24.3 lbs. 35.2 lbs. 24.3 lbs.

Filter P/N (2pk.) 428956 428956 428956

CS 1445 H

KAV 30 AIR Vacuum SpecificationsDry Model

303.10KAV30/DWet/Dry Model

303.10KAV30/WD

CFM @ 90 PSI 35 35

Output flow 70 CFM 70 CFM

Tank capacity 6.8 gal. 6.8 gal.

Weight 32 lbs. 32 lbs.

Paper Filter P/N (10pk.) 303.1030 303.1030

HEPA Filter P/N 303.1060 303.1060

Standard Vacuum SpecificationsCS 1225 CS 1500

Power 11 Amp 11 Amp 11 Amp

Air flow 130 CFM 130 CFM 130 CFM

Tank capacity 6.6 gal. 13 gal. 9 gal.

Weight 24.3 lbs. 35.2 lbs. 24.3 lbs.

Filter P/N (2pk.) 416069 416069 416069

CS 1445

15

We make no claim that use of a vacuum will eliminate contaminants. Wear an approved respirator mask and follow all appropriate OSHA safety regulations forproper ventilation, dust handling, eye protection, etc. when using a dust extraction grinder and vacuum.

Dust Collection Vacuums Pneumatic • Electric

Optional Filters, Bags and Accessories for KAV 30 AIRAntistatic standard filter assembly (dry use w/paper filter or bag) - P/N 303.1025/ASPermaflow filter for secondary filtration - P/N 303.1035Antistatic float assembly for wet use - P/N 303.1050/ASDisposable, sealable paper bags for waste such as hazardous dust - P/N 303.1005 (10-pack)

KAV 30 AIR - Dry Model Part No. 303.10KAV30/DStandard equipment includes:Antistatic 38mm tool kit w/

dusting brush (P/N 303.1085/AS)Antistatic cloth filter (P/N 303.1025/AS)K6 paper filters (10pk.) (P/N 303.1030)

The ATEX Directive 94/9/EC (ATEX Group-95) was established toprovide technical and quality objectives to control explosiveatmospheres, as well as the standards for equipment andprotective systems used in such areas. Recognized internationally,tools with ATEX classification provide safety assurances to usersthat the product was manufactured to high levels of safety.

Four ATEX classification elements are used to ensure equipmentis appropriate for its intended purpose and application.

For more information on these classification elements, as wellas the ATEX Directive and Ex zones, visit www.csunitec.com.

*ATEX Classified power tools ensure a high level ofsafety in Ex zones and hazardous atmospheres.

KAV 30 AIR - Wet/Dry Model Part No. 303.10KAV30/WDStandard equipment includes:Antistatic float assembly (P/N 303.1050/AS)Antistatic 38mm tool kit (P/N 303.1095/AS)Antistatic cloth filter (P/N 303.1025/AS)K6 paper filters (10pk.) (P/N 303.1030)

Metalworking Tools for Marine, Bridge, Pipeline and

Documents

Transcript of Metalworking Tools for Marine, Bridge, Pipeline and