Metalux

SPECIFICATION FEATURES

ConstructionNominal 6" deep housing is die formed of code gauge, prime cold rolled steel. Heavy gauge end plates are securely attached with screws for strength and rigidity and the elimination of gaps. Four auxiliary fixture end suspension points are provided.

ControlsMetalux LED luminaires come standard with 0-10V dimming drivers (1% standard).

Options compatible with Eaton’s Connected Lighting Systems:• LumaWatt Pro sensor• Fifth Light DALI driverOther options include step-dimming and 3rd party drivers. Refer to the Connected Lighting options page and ordering information for more details.

ElectricalLong-Life LED system coupled with electrical driver to deliver optimal performance. LED’s available in 3000K, 3500K, 4000K or 5000K with a minimum CRI of 80. Projected life is 60,000 hours at 80% lumen output. cULus listed. Electronic drivers are available for 120-277V and 347V applications.

Emergency Battery Pack OptionOptional 120v-277v integral emergency battery pack is available in 7-watts or 14-watts to meet critical life-safety lighting requirements. The 90-minute batteries provide constant power to the LED system, ensuring code-compliance. The patented EZ Key prevents accidental discharge of the battery during construction. See ordering information for details.

FinishDurable cold rolled steel with multistage, iron phosphate pretreatment and white enamel finish to ensure maximum bonding and rust inhibition.

ReflectorsIndirect reflector has high reflectance baked matte white enamel finish for luminous uniformity. Positively retained direct lamp shield is constructed of heavy gauge perforated steel with high reflectance painted after fabrication finish and milky white overlay diffuser for visual comfort. All reflectors are precision formed in a computer-controlled operation.

ComplianceModules are UL recognized components and indoor luminaires are cULus listed for 25ºC ambient environments, and LED modules comply with IESNA LM-79 and LM-80 standards. DesignLights Consortium® Qualified and classified for DLC Standard, refer to www.designlights.org for details.

WarrantyFive year warranty.

PS519178EN4-19-2018

The Ovation LED Series is a complete family of recessed direct/indirect luminaires dedicated to the latest solid state lighting and driver technology for optimal performance and energy efficiency. All components are located above the ceiling plane for a clean architectural appearance in the finished space. Carefully balanced design elements combine to provide an efficient and exciting alternative to traditional general lighting. Ovation LED is an excellent choice for commercial office spaces, schools, hospitals, or retail merchandising areas.

DESCRIPTION

23-3/4"[603 mm]

6"[152mm]

Catalog # Type

Date

Project

Comments

Prepared by

Safe and convenient means of disconnecting power

47-11/16"[1211mm]

2-3/4"[70mm]

2-1/2"[64mm]

1-1/2"[38mm]

WiringAccess Plate7/8" [22mm]

K.O. (2)

23-3/4"[603mm]

MOUNTING DATA

Ceiling TrimType** TypeExposed Grid GConcealed T G or TSlot Grid G or TFlange ***

GGrid/Lay-inStandard

TSlot Grid

FDrywallFrame Kit

CEILING COMPATIBILITY

24RDI LED

2 ' X 4 ' T R O F F E R L E D M O D U L E

Spec i f i ca t ion Grade Trof fer

C E R T I F I C A T I O N D A T AcULus - 1598

Damp Location Listed

IC Rated

LM79/LM80 Compliant

DesignLights Consortium® Qualified

NOM Compliant

*See Drywall Frame Kit Accessory in

Ordering Information Section

Specifications and dimensions subject to change without notice.

Eaton 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.eaton.com/lighting

24RDI LED 2' X 4'

PS519178EN4-19-2018

PHOTOMETRICS

24RDI-40- UNV-L835-CD1-U

Electronic Driver

Linear LED 3500K

Spacing criterion: (II) 1.22 x mounting height, (⊥) 1.32 x mounting height

Lumens: 4096.9

Input Watts: 39.6W

Efficacy: 103.5 lm/W

Test Report: 24RDI-LD5-40RP-UNV-L835-CD1-U.IES

051015202530354045505560657075808590

C a n d l e p owe r

Angle Along II 45° Across ⊥

1407 1407 14071402 1398 14051379 1380 13911342 1350 13671290 1310 13361227 1259 12951153 1199 12481066 1129 1186972 1051 1121872 969 1045759 878 947644 780 833524 667 714401 542 569278 404 441183 275 329102 172 20635 67 760 0 0

C o e f f i c i e n t s o f U t i l i z a t i o n

Effective floor cavity reflectance 20%

rc 80% 70% 50% 30% 10% 0%rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR0123456789

10

119 119 119 119 116 116 116 116 111 111 111 106 106 106 102 102 102 100109 104 99 96 106 102 98 94 97 94 91 93 91 88 90 88 86 8499 90 83 78 96 88 82 77 85 80 75 82 77 73 79 75 72 6990 79 71 64 87 78 70 64 75 68 63 72 66 61 69 64 60 5882 70 61 54 80 69 60 54 66 59 53 64 58 52 62 56 52 5075 62 53 47 73 61 53 46 59 52 46 57 51 45 55 50 45 4370 56 47 41 68 55 47 40 53 46 40 52 45 40 50 44 39 3765 51 42 36 63 50 42 36 49 41 35 47 40 35 46 40 35 3360 46 38 32 58 46 38 32 44 37 32 43 36 31 42 36 31 2956 43 34 29 55 42 34 29 41 34 28 40 33 28 39 33 28 2653 39 31 26 51 39 31 26 38 31 26 37 30 26 36 30 26 24

Z o n a l L u m e n S u m m a r y

Zone Lumens % Fixture0-30

0-40

0-60

0-90

0-180

1096 26.8

1802 44.0

3221 78.6

4097 100.0

4097 100.0

L u m i n a n c e Da t a

Anglein Deg

Average0-Degcd/sm

Average45-Degcd/sm

Average90-Degcd/sm

4555657585

1659 1844 19881511 1830 19541277 1726 1812951 1430 1710540 1034 1173

352

0˚ 30˚

40˚

50˚

70˚

90˚

20˚

80˚

60˚704

1056

1408

10˚

24RDI-50- UNV-L835-CD1-U

Electronic Driver

Linear LED 3500K

Spacing criterion: (II) 1.22 x mounting height, (⊥) 1.32 x mounting height

Lumens: 5067.5

Input Watts: 50.3W

Efficacy: 100.7 lm/W

Test Report: 24RDI-50-UNV- L835-CD1-U.IES

051015202530354045505560657075808590

C a n d l e p owe r

Angle Along II 45° Across ⊥

1739 1739 17391734 1727 17361705 1705 17181658 1669 16881596 1618 16501518 1555 16021425 1481 15421319 1394 14671203 1300 13851073 1196 1287942 1087 1173802 963 1030649 824 884493 669 706349 506 549228 341 410129 216 25445 86 940 0 0

C o e f f i c i e n t s o f U t i l i z a t i o n

Effective floor cavity reflectance 20%

rc 80% 70% 50% 30% 10% 0%rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR0123456789

10

119 119 119 119 116 116 116 116 111 111 111 106 106 106 102 102 102 100109 104 99 96 106 102 98 94 97 94 91 93 91 88 90 88 86 8499 90 83 78 96 88 82 77 85 79 75 82 77 73 79 75 72 6990 79 71 64 87 78 70 64 75 68 63 72 66 61 69 64 60 5882 70 61 54 80 69 60 54 66 59 53 64 58 52 62 56 52 5075 62 53 47 73 61 53 46 59 52 46 57 51 45 55 50 45 4370 56 47 41 68 55 47 40 53 46 40 52 45 40 50 44 39 3765 51 42 36 63 50 42 36 49 41 35 47 40 35 46 40 35 3360 46 38 32 58 46 37 32 44 37 32 43 36 31 42 36 31 2956 43 34 29 55 42 34 29 41 34 28 40 33 28 39 33 28 2653 39 31 26 51 39 31 26 38 31 26 37 30 26 36 30 26 24

Z o n a l L u m e n S u m m a r y

Zone Lumens % Fixture0-30

0-40

0-60

0-90

0-180

1355 26.7

2227 43.9

3983 78.6

5068 100.0

5068 100.0

L u m i n a n c e Da t a

Anglein Deg

Average0-Degcd/sm

Average45-Degcd/sm

Average90-Degcd/sm

4555657585

2042 2276 24491881 2259 24161570 2130 22481185 1773 2131695 1328 1451

435

0˚ 30˚

40˚

50˚

70˚

90˚

20˚

80˚

60˚870

1305

1740

10˚

Ambient Temperature

TM-21 LumenMaintenance

(60,000 hours)

TheoreticalL70

(Hours)

25°C > 89% > 60,000

LUMEN MAINTENANCE ENERGY AND PERFORMANCE DATA BY CATALOG NUMBER

Stock orMTO*

Catalog Logic(Curved)

DeliveredLumens

WattsEfficacy(LPW)

MTO 24RDI-30-UNV-L830-CD1-U 3010 28.7 104

MTO 24RDI-30-UNV-L835-CD1-U 3071 28.7 107

MTO 24RDI-30-UNV-L840-CD1-U 3132 28.7 109

MTO 24RDI-30-UNV-L850-CD1-U 3225 28.7 112

MTO 24RDI-40-UNV-L830-CD1-U 4015 39.6 101

MTO 24RDI-40-UNV-L835-CD1-U 4097 39.6 103

MTO 24RDI-40-UNV-L840-CD1-U 4179 39.6 105

MTO 24RDI-40-UNV-L850-CD1-U 4302 39.6 108

MTO 24RDI-50-UNV-L830-CD1-U 4966 50.3 98

MTO 24RDI-50-UNV-L835-CD1-U 5067 50.3 100

MTO 24RDI-50-UNV-L840-CD1-U 5168 50.3 102

MTO 24RDI-50-UNV-L850-CD1-U 5320 50.3 105

*Made to order (MTO) requires a typical three week lead time.

24RDI LED 2' X 4'

Specifications and dimensions subject to change without notice.

Eaton 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.eaton.com/lighting

PS519178EN4-19-2018

ORDERING INFORMATION

A C C E S S O R I E SEQ-CLIP-U=T-BAR Safety Earthquake Clips (1)

DF-24-W=2' x 4' Drywall Frame KitSK-24-WT=2' x 4' Tall Surface Mount KitDF10P-C =Decorator Dimmer, 0-10VSF10P- =Decorator Slide Dimmer, 0-10V

SAMPLE NUMBER: 24RDI -30 -UNV-L835 -CD1-U

=

ShieldingBlank=Metal Perforated Lens (standard)

Voltage (2)

347V=347 Volt (4)

UNV=UniversalVoltage 120-277

Number of Drivers1=1 Driver

NOTES: (1)An EQ Grid Clip is recommended for all 9/16" ceiling systems. Four required per fixture. (2)Products also available in non-US voltages and frequencies for international markets. (3)With integral test switch/indica-tor. For approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the emergency battery pack (100 lm/W x 7=700 lumens). IES-format photometry for luminaire under emergency operation available. (4) 347V versions are not available with emergency options. SD, 5LTD, not available. (5) Used to transfer fixture to secondary power source for life-safety operation. When used with a dimming fixture, two devices are required to ensure control is disabled while operating under emergency power. (6) Must specify 120V or 277V for wiring of ETS/GTD components. (7) Air version is vented but does not meet air handling requirements. (8) Chicago rated and air vented cannot be ordered in combination with each other. (9)DesignLights Consortium® Qualified and classified for DLC Standard, refer to www.designlights.org for details.

OptionsEmergencyEL7W=7-watt, 120V-277V emergency battery pack installed (3)

EL14W=14-watt 120V-277V emergency battery pack installed (3)

GTD2=Bodine Generator Transfer Device (5), (6)

ETS2=IOTA Emergency Transfer Switch (5), (6)

CCTL830=3000KL835=3500KL840=4000K

FlexA3/8-4/18GDIM=3/8" Flex with 0-10V Dimming LeadsMultiple other configurations available. See below for details.

L850=5000K

Lumen Output30=3000 Lumens40=4000 Lumens50=5000 Lumens

OvationRatingBlank=StandardATW-SW4=ChicagoRated (8)

Series (9)

24RDI=2x4 Ovation Series(Recessed Direct/Indirect)

Air[Blank]=StandardA=Air (Vented) (7), (8)

Integrated Sensing and Control System OptionsNOTES: Integrated options must be used in conjunction with the associated system and may not be compatible with other options or accessories. Please refer to the following: (A) Consult LumaWatt Pro system pages for additional details and compatibility. (B) Consult Fifth Light system pages for additional details and compatibility.

PackagingU=Unit PackPALC=JobPack, in carton

Integrated Sensing SystemsLWTPD1=LumaWatt Pro Wireless Tile-mount Sensor (A)

Driver TypeCD=0-10V Dimming Driver (1%-100% Dimming)SD=Step Dimming Driver (50% or 100% Dimming)5LTD=Fifth Light DALI Driver (10%-100% Dimming) (B)

A C C E S S O R I E SEQ-CLIP-U=T-BAR Safety Earthquake Clips (1)

DF-24-W=2' x 4' Drywall Frame KitSK-24-WT=2' x 4' Tall Surface Mount KitDF10P-C =Decorator Dimmer, 0-10VSF10P- =Decorator Slide Dimmer, 0-10V

SAMPLE NUMBER: 24RDI -30 -UNV-L835 -CD1-U

=

ShieldingBlank=Metal Perforated Lens (standard)

Voltage (2)

347V=347 Volt (4)

UNV=UniversalVoltage 120-277

Number of Drivers1=1 Driver

NOTES: (1)An EQ Grid Clip is recommended for all 9/16" ceiling systems. Four required per fixture. (2)Products also available in non-US voltages and frequencies for international markets. (3)With integral test switch/indica-tor. For approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the emergency battery pack (100 lm/W x 7=700 lumens). IES-format photometry for luminaire under emergency operation available. (4) 347V versions are not available with emergency options. SD, 5LTD, not available. (5) Used to transfer fixture to secondary power source for life-safety operation. When used with a dimming fixture, two devices are required to ensure control is disabled while operating under emergency power. (6) Must specify 120V or 277V for wiring of ETS/GTD components. (7) Air version is vented but does not meet air handling requirements. (8) Chicago rated and air vented cannot be ordered in combination with each other. (9)DesignLights Consortium® Qualified and classified for DLC Standard, refer to www.designlights.org for details.

OptionsEmergencyEL7W=7-watt, 120V-277V emergency battery pack installed (3)

EL14W=14-watt 120V-277V emergency battery pack installed (3)

GTD2=Bodine Generator Transfer Device (5), (6)

ETS2=IOTA Emergency Transfer Switch (5), (6)

CCTL830=3000KL835=3500KL840=4000K

FlexA3/8-4/18GDIM=3/8" Flex with 0-10V Dimming LeadsMultiple other configurations available. See below for details.

L850=5000K

Lumen Output30=3000 Lumens40=4000 Lumens50=5000 Lumens

OvationRatingBlank=StandardATW-SW4=ChicagoRated (8)

Series (9)

24RDI=2x4 Ovation Series(Recessed Direct/Indirect)

Air[Blank]=StandardA=Air (Vented) (7), (8)

Integrated Sensing and Control System OptionsNOTES: Integrated options must be used in conjunction with the associated system and may not be compatible with other options or accessories. Please refer to the following: (A) Consult LumaWatt Pro system pages for additional details and compatibility. (B) Consult Fifth Light system pages for additional details and compatibility.

PackagingU=Unit PackPALC=JobPack, in carton

Integrated Sensing SystemsLWTPD1=LumaWatt Pro Wireless Tile-mount Sensor (A)

Driver TypeCD=0-10V Dimming Driver (1%-100% Dimming)SD=Step Dimming Driver (50% or 100% Dimming)5LTD=Fifth Light DALI Driver (10%-100% Dimming) (B)

Catalog No. Wt.

24RDI 30 lbs.

SHIPPING DATA

Flexible Metal Conduit OptionsFlex options available for 0-10V dimming control, DALI dimming control, emergency and night light functions. 72-inch factory-installed and pre-wired to driver, fitted to luminaire housing access plate with 90° enclosed FMC connector. Not all options may be combined and installation ratings vary by type.A3/8-4/18GDIM series notes: Factory installed dimming option 3/8” flexible metal conduit with 2-#18 power and ground wires and 2-#18 UL-listed jacketed 0-10V +/- control wires. Meets UL 66, 83, 1479, 1569, 1581, 2556. NEC® 250.118, 300.22(C), 392, 396, 330, 501, 502, 503, 530, 504, 505, 518, 520, 530, 645, 72; Federal Specification A-A-59544 (formerly J-C-30B); all applicable OSHA and HUD Requirements. UL Classified 1-, 2-, and 3-hour through penetration with applicable fire stop product (not included). May be surface mounted, fished and/or embedded in plaster. Cable tray and approved raceway rated, install per NEC®; Environmental Air-Handling Space Installation per NEC® 300.22(C ).

Specifications & dimensions subject to change without notice. Consult your Eaton Representative for availability and ordering information.