Metal Gutting Circular Sawfor Sheet-Metal Sections

for cutting all sizes ofsheet-metal flanges in theheating and ventilationindustry

With special double-grip viceand profiled jaws equipment

Shown:Version Bwith air controlled automatic viseclamping by a control valve behindthe saw head. Complete with airpressure lubrif icator-regulator.

Model Ho

HABERLE@ is a registered trade name ot Franz HEiberle Maschinenfabrik, Gaggenau/Germany. . . . a pfOdUCt Of WeSt Gefmany

Tech n ical specificationsSafety Sawblade GuardThe link operated twin guard covers the whole sawblade whenthe machine is not actually cutting and opens when the machinehead is moved downwards.

MotorWhen ordering please specify voltage and cycle of your current.50 Hz: Standard 3-phase 1400/2800 rpm,0.7511 HP

Optional 3-phase 700/1400 rpm, 0.6/0.9 HPOptional 1-phase 1400 rpm,0.75 HP1 -phase 2-speed motor upon request

60 Hz: Standard 3-phase 1700/3400 rpm,0.7511 HPOptional 3-phase 850/1700 rpm,0.6/0.9 HPOptional 1-phase 1700 rpm,0.75 HP

Sawblade Speeds50 Hz: 25 rpm with motor speed 700 rpm

50 rpm with motor speed 1400 rpm100 rpm with motor speed 2800 rpm

60 Hz: 30 rpm with motor speed 850 rpm60 rpm with motor speed 1700 rpm

120 rpm with motor speed 3400 rpm

Cutting Range

with sawblade 250 mm Teeth

O 3" dia.n 2'/ox2t/0"

O 2" dia. mild steel

160160/200160/20080

Main SwitchThe front mounted main switch is supplied with Emergency Off pushbutton and thermic motor overload protection.

Drive UnitThe robust worm and wheel drive runs in an oil bath.Thehardened and ground worm is mounted in bearings at bothends. The main spindle is of heavy construction, and thewheel is made of special bronze material, guaranteeing longlife.

Glamping UnitThe manual or pneumatic double-grip vice holds the mate-rial on both sides of the sawblade, to ensure a burr-free cut.

Goolant SystemA removable reservoir for coolant and a separate swarf-drawer is provided in the machine base. The diaphragmpump ensures good cooling.

Sawblades H.S.S.250 x 2.0 x 40 mm, with 1 10, 160 or 200 teeth;225 x 1.6 x 40 mm, with 220 teeth for flanges.Two pin holes 8 mm dia. on cycle 55 mm dia.

Dimensions and WeightsMachine unpacked: 470 x750 x 950 mm, 96 kgMachine in carton: 480 x 980 x 570 mm, 116 kgFabricated stand: 420 x 585 x 580 mm, 22 kg

Standard EquipmentProfiled jaws equipment for the flanges, operating wrenches,ooerator's manual.

Optional EquipmentFabricated machine stand: sawblades; concentrated coolanttluid;24 Volts switch in the handle; material carriers; lengthstops

Fabricated iron stand

Length stop 1 000 mm, ungraduated

Length stop 1500 mm,with mm-scaleLength stop 3000 mm,with mm-scale

Modifications of the construction reserved Printed in West Germany