MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a...
-
Upload
melvin-benson -
Category
Documents
-
view
217 -
download
2
Transcript of MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a...
![Page 1: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/1.jpg)
MEG Cryostat Fabrizio Raffaelli
INFN sezione di Pisa
The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK (Japan), ICEPP (Japan), Waseda University (Japan), PSI (Switzerland) and BINP (Russia).The aim of the experiment is to reveal the possible decay m+->e+ g with a very high level of sensitivity (BR<10-13) with respect to the normal muon decay. The experiment will be performed at Paul Scherred Institut Switzerland. It includes two main detectors: a liquid Xenon electromagnetic calorimeter for photons detection and a magnetic spectrometer for positrons detection.Period 2004-2006INFN of Pisa had designed and built the liquid Xenon cryostat and the internal supporting structure of the photomultipliers. The design has been carriedout using the ASME VIII div 2 and the ANSYS program. The tecnological difficulties are realated to the limited space avaible to make the cold and the vacuum chambers. The cleaness requirement are very stringent. Furthermore in some aresas the material must be minimized. The thermal imput must be limited to 100 Watt.
![Page 2: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/2.jpg)
MEG Cryostat Experimental area at Paul Scherred Institut (PSI)
Liquid Xenon cryostat
![Page 3: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/3.jpg)
Materials and space limitsCryostat must be positioned with the internal detecting structure with a precision of a couple of mm respect the Superconducting magnet (Corba).The limited space between the magnet and the cryostat dose not allowed to make the flanges of the cold chamber enough stiff. The material used must have a magnetic relative permeability less of 1.008 to damage to the superconductive magnet.Usually the austenitic stainless steel have a relative permeability equal or bigger or than 1.01. For this reason many parts are made in 25 Cr-20Ni SA-240 Plate ASME 310S.
Vacuum chamber Cold chamber
CORBA Magnet
![Page 4: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/4.jpg)
Limted material areas In the angular regions between +/-630 and longitudinal +/-250. the material thickness must be limited as much as possible.
![Page 5: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/5.jpg)
CORBA Supercondacting magnet
Corba magnet: central part is made by a superconducive magnet with an alluminum cryostat such that will be as mauch as possible transparent to the particles.
Warm magnet ouround the S.M. are used to to cancel the magnetic field i saome areas.Materials oround with magnetic permeability bigger than 1.008 can casue forces on the cold mass such to break the magnet
![Page 6: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/6.jpg)
Some tecnical requirements
Cold Chamber:Working temperature 165K; design and test pressure respectively of 0.2 Mpa e 0.4 Mpa. Leak rate below 10-9 atm cm3/sec. This last requirements implied the use of metallic seals.Typical pre-setting values are 285 Newton/mm.Welding procedures must guarantee the cleanness of inner surfacesXeno must not enter in front of the detecting systemVacuum chamber:External pressure 0.1 Mpa at the working temperature of 20 0C
![Page 7: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/7.jpg)
The front part of the internal structure must be adherent to the cold windows Peek Aluminum 5083-0 AISI 316L
![Page 8: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/8.jpg)
Inner Vessel flanges Cold chamber the space avaible has force us to limited the flanges dimension and study the positiong of the welding.
![Page 9: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/9.jpg)
Intermediate test during construction.
After the warm and cold chambers have been welded. We test them with helium. Sealing the volume using covers with special compound to verify that no leak are present in the weddings and materials. The Fea model in this configuration shown excessive deformation that does not allowed to make the test on the cold chamber. This test was possible only adding an internal structure to stiffening the chamber.
Cold chamber:
![Page 10: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/10.jpg)
Intermediate test during constructionCold chamber: case open with cover not connected under an external pressure of 0.1 Mpa. In the first attemped to make vacuum. We stopped the test after the structure move of 20 mm loosing the thightness.The model shows the max deformation of 40mm and high stress on the inner ring.
![Page 11: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/11.jpg)
Intermediate test during construction
Vacuum chamber: no cover under an external pressure of 0.1 Mpa. In the lower part reinforced plate were welded in the corrispondence of the supports.
![Page 12: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/12.jpg)
Test in pressione della camera fredda chiusa
![Page 13: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/13.jpg)
Pressure test of the cold vessel max displacement measured at the pressure test 4 bar
1
2
34
Dial indicator 1 disp.= 1.2 mmDial indicator 2 disp.= 1.25 mm Dial indicator 3 disp.= 0.55 mmDial indicator 4 disp.= 0.055mm
1.7 mm Dial. N. 2 1.3 mm Dial. N.1
![Page 14: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/14.jpg)
14
According to ASME the thickness of flanges are undersize considering the allowable stress. However we reinforced the weldings with a large fillet.
front wall
inner wall
outer wall
cover
front wall head
cover
WALL DESIGN PRESSURE
ASME rule reference
MINIMUMREQUIRED THICKNESS
ACTUAL THICKNESS
Inner wall (cylindrical shell)
0.2 MPaExternal pressure
UG – 28 5 mm 18 mm
Outer wall(cylindrical shell)
0.2 MPaInternal pressure
UG - 27 1.7 mm 8 mm
Flat head(plate)
0.2 MPa UG - 34 17 mm 20 mm
Cover (plate)
0.2 MPa UG – 34 24 mm 24 mm
![Page 15: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/15.jpg)
15
After the qualification test we do the final machining to prepare it for the windows weldings.
Welding foil of 0.3mm to garantee the sealing and cleneass.
![Page 16: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/16.jpg)
16
Windows designs0.3mm sheet to seal the liquid Xeno
Honeycomb and carbon fiber panel
Cold chamber
0.3 mm sheet window vacuum chamber
![Page 17: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/17.jpg)
17•WARM WINDOW
Welding of the parts. Three days for welding the foil and 3 days to check and repair leaks test box.
![Page 18: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/18.jpg)
18
Vacuum window test
•H2O
•100 mm
•2E,2C •3E, 3C
•1E,1C
We repet thress time the measuraments to verify the stability of the vaccum window. The menbranal stress in the central part is 250 Mpa. We were more anbicius thinking to use .15mm sheet, but we had weldings problems, finally the thickness used was 0.3mm
Four steps: 0.6 bar, 0.9 bar, 1.2 bar, 1.5 bar
![Page 19: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/19.jpg)
19
Test of the vaccum chamberDialed indicator
positions
![Page 20: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/20.jpg)
20
2mm were measured
A good agreement on the measurements
![Page 21: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/21.jpg)
21
2mm misurato
21
Lateral plugs Small window 0.1mm SS. sheets
Vacuum
Liquid Xeno
![Page 22: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/22.jpg)
2mm misurato
22
Cold window first panel carbon fiber aluminum honeycomb
High module pitch carbon fiber 550Gpa6 plies (0/+45/-45)s Total Thickness .7mm per skinsHoneycomb thickness 19 mmDensity 50Kg/m3.
Glued with film adhesive Redux 312UL.Material with low outgassing rate resin cyanate ester
![Page 23: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/23.jpg)
2mm misurato
23
First Panel
The film adhesive used Redux 312UL (-55 0C) is not suitable for the nitrogen temperature (-200 0C)The pitch fibers used are very brittle. Delaminations around the holes are visible.The construction method was not adequate for the precision required. Mechanical calculation and Fea model were made to verify the stability , the strength and the stiffness verification .
![Page 24: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/24.jpg)
2mm misurato
24
Stacking sequence of the central part.
Fea model ¼ with symmetry boundary condition and hinged edges
CF lamina properties
Honeycomb properties
Max disp. 0.65 mm
•Fea analysis stiff99 Ansys
![Page 25: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/25.jpg)
Strength ratio
The coupling factors are related to the theory of coupling of the transverse properties of the laminate. To be able to apply the index factor we need to have nine stress limits and three coupling factors. Used symbols x fiber direction, y perpendicular to the fiber, c compressive t tensile z is perpendicular to the lamina, f means allowed
![Page 26: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/26.jpg)
26
Layer 13 stress direction of fiber Bottom Mpa Layer 13 stress direction of fiber top Mpa
Ts0 2.193 109
Pa tensile strenght parallel to the fibers
Ts90 44.057 106
Pa Tensile strenght perpendicular to the fiber
TC0 58.7 103
psi
TC0 404.722 106
Pa Tensile compressive strenght parallel to the fibers
SS 89.632 106
Pa Shear strenght in plane
Fst 882.529 106
Pa bending strenght
![Page 27: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/27.jpg)
2mm misurato
27
Linear buckling studies
![Page 28: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/28.jpg)
2mm misurato
28
The shell model does not see the effects on the edges where we change the cross section.
In the first panel the transition was not proper done:1) A layer of pre-preg fabric should be interplayed each two ply of unidirectional pre-
preg with a 1 inch of overlap.2) At least three plies of fabric should be there and since must be placed staggered.
The total reinforcement should be extended for 6 cm.3) A potting (epoxy loaded with glass fiber was used to assure the continuity of the
honeycomb.
Fabric pre-preg overlapped
![Page 29: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/29.jpg)
2mm misurato
29
Pressure test Breaking at 3.7 bar.The skin probably break on the side in contact with the stainless steel and after the panel is so weak that breaks on the other side.The material is weak out of plane and the limit for inter laminar shear stress are very low respect the in plane tensile stress.
Insufficient transition area and internal reinforcement, cause the initial breaking of the panel.
![Page 30: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/30.jpg)
30
2mm misurato
30
303030
The sheet after the panel breakageDuring the test the displacement were in agreement with the model
Sheet wrinkles
Strain gage position
14.5 mm
4E
2E,3C 3E1E,1C
2C
![Page 31: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/31.jpg)
2mm misurato
31
New Panel design . Different material:1) Fabric plain wave2) Fiber low intermediate high module T3003) Resin epoxy space approve4) Honeycomb in aluminum5) Small filling parts in Rohacell 51Different construction method All parts were glued at room temperature with a post-curing a 50-60 0C. Structural glue qualified at low temperate (Hysol EA 936 Henkel). Glue data at the nitrogen temperature shear strength of 27.6Mpa (With sinle lap shear test aluminum on aluminum (2024T4). The final skin thickness was 1.2mm obtained with 8 plies +90 0 -90 to take in account the low module of T300. We made in home the test on the Carbon fiber material at the nitrogen temperature.Internal Z reinforcement.
![Page 32: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/32.jpg)
32
2mm misurato
32
323232
Test on the materials SR= 518-680 MpaAlr 1.2-2.9%
![Page 33: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/33.jpg)
33
2mm misurato
333333
Internal Z reinforcement
![Page 34: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/34.jpg)
34
2mm misurato
34
343434
Stampo pelle interna
Stampo per Rinforzo interno
Stampo pelle interna
![Page 35: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/35.jpg)
35
2mm misurato
![Page 36: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/36.jpg)
2mm misurato
36
Final test on at the nitrogen temperature
![Page 37: MEG Cryostat Fabrizio Raffaelli INFN sezione di Pisa The MEG experiment is being built by a collaboration of INFN (Pisa, Pavia, Lecce and Roma I),: KEK.](https://reader035.fdocuments.net/reader035/viewer/2022081603/5697bffb1a28abf838cc0d3f/html5/thumbnails/37.jpg)
2mm misurato
37
The use of ansys allowed us to have information on the behaviors of the mechanical structures analyzed driving us on the design solution s like:
1) Positioning of the stiffening2) Analyzed the shaping of the thin sheet windows3) Analyzed the Caron fiber honeycomb panel.