Meeting Notes Group Discussion Group Exercise …...Mining Industry Advisory Committee Research...
16
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019 ACR - Mining Industry Advisory Committee (MIAC) Research Summit Thursday, January 31 st , 2019 10:00 to 15:30 Meeting Notes Group Discussion Group Exercise Summary of Results
Transcript of Meeting Notes Group Discussion Group Exercise …...Mining Industry Advisory Committee Research...
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
ACR - Mining Industry Advisory Committee (MIAC)Research Summit
Thursday, January 31st, 2019 10:00 to 15:30
Meeting NotesGroup Discussion
Group Exercise Summary of Results
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
ACR - MIAC RESEARCH SUMMITJANUARY 31ST, 2019 (OVER 40 FIRMS AND 77 ATTENDEES)
What Did We Talk About?Ø Mining Research Focal Points: Objectives, Members, Funding, Current focus areas, Future
• Canadian Oil Sands Innovation Alliance (COSIA) Matt McCulloch COSIA Director Innovation & GHG • Canada Mining Innovation Council (CMIC) Carl Weatherell Executive Director & CEO • Global Mining Group Heather Ednie Managing Director, GMG• University of Alberta Robert Hall Mining Engineering Professor
Ø Mining Research Road Map and Priorities- Surface Mine of the Future Mal Carroll, GM Syncrude R&DØ Innovation and Risk Gary Bunio, GM, Strategic Technology Development, Suncor
Group Discussion Exercise and Democratic Process – Gord Winkel, Chair, Industrial Professor, Engineering Safety and Risk Management Program Faculty of Engineering, University of Alberta.
Ø Participation in Technology Deployment to Set the stage for greater focused targeted collaboration in Alberta Mining.• In small Group Exercise and using the Dotmocracy Process, referenced the CMIC Surface Mining Roadmap.• Discussed focus areas on the Roadmap, and chose individual top 5 priorities. Used 5 dots and recorded the number of the priority from the
Roadmap, and placed on common CMIC roadmap.• Additional focus areas, could also be added.• Requested participants to provide name and contact information on sticky’s of interest focus areas.
OutcomesØ All participants informed on Focal Point Organization’s (CMIC, COSIA, GMG, and University of Alberta) vision and scope.Ø Topics of interest have been identified, and individual contact information provided.
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
ACR - MIAC RESEARCH SUMMITJANUARY 31ST, 2019 (OVER 40 FIRMS AND 77 ATTENDEES)
Results of Dotmocracy and Interest Focus Areas
These results are reflective of the ACR Membership and other attendees at this Research Summit. Results may be different for a different audience.Use the Roadmap in your organizations and interactions, and feedback is always welcome to improve our Roadmap.We will continue to use this Roadmap and revise and improve as more data is collected. Summit participants will be communicated, any improvements and updates to the Roadmap.
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
ACR - MIAC RESEARCH SUMMITJANUARY 31ST, 2019 (OVER 40 FIRMS AND 77 ATTENDEES)
Next StepsØ Facilitate connection of organizations and individuals with like interest opportunities for collaboration.Ø ACR/MIAC will monitor progress and provide support / guidance to connect with CMIC and COSIA, GMG and
University of Alberta.Ø Expectation is organizations and individuals will take the initiative to initiate collaboration, studies, projects,
workshops etc.Ø Participants to contact research focal points to be included on their mailing list for news items and activities. Ø Provide progress update on initiatives.
What: Focus where:Who:
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
ACR - MIAC RESEARCH SUMMITJANUARY 31ST, 2019 (OVER 40 FIRMS AND 77 ATTENDEES)
Mining Research Groups Contact Information
Canada’s Oil Sands Innovation Alliance (COSIA)Email: [email protected] www.cosia.ca
Matt McCulloch P.Eng. COSIA Director Innovation & Greenhouse Gas,
Suite 1700, 520 5th Avenue SW, Calgary, AB T2P 3R7,Direct: 403.444.5271, Mobile: 403.970.4308, Fax: 403.444.5288,
Canada Mining Innovation Council (CMIC)Email: [email protected] www.cmic-ccim.org
Carl Weatherell, Executive Director & CEO,1.613.627.0771 x105 1.613.979.3142 (m)
Global Mining GroupEmail: [email protected], and [email protected] Ednie Managing Director,26 Bridge Street, Ormstown, QC, J0S 1K0,Phone: 450-829-9000 or 450-829-9111.
University of AlbertaRobert Hall Mining Engineering Professor,Email: [email protected]/civil-environmental-engineering/undergraduate-studies/mining-and-petroleum-engineeringPhone: 780-886-6105
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
CMIC Surface Mining RoadmapReduce core
sampling requirements
Adopt coil drill techniques
Improve real time data analyses
Improve blast hole analyses
Integrate ore sensing at the face
Implement multi-disciplinary analyses
Develop AI based ore models
Integrate all ore body data into one common spatial
database & planning pltfrm
Integrate common database of all resources
and capabilities
Integrate operational planning and scheduling with financial
systems to model system value
Explore continuous cutting machines for bulk mining
Develop high intensity blasting techniques for fragmentation control
Engineer ore sorting at the face and along the mining process to eliminate waste
Pre-concentration of ore inside the pit
Dedicated ore streams to selective processing to
reduce/eliminate blending
Decouple truck and shovel interface with loading buffer (surge loader)
Electric, modular truck/truck train (trolley assist/Battery hybrid)
Remote operation integrated with
autonomous hauling
Explore application of alternative technologies
(Rail-veyor/RopeCon, other)
Multi-modal system to optimize the flexibility and cost advantage
of different technologies
Develop modular equipment that can be containerized for easy
transport and on-site assembly
Use hybrid air vehicles to transport equipment
modules to remote sites
Avoid building road/rail infrastructure to remote
sites where viable
Decouple equipment life from life of the ore body.
Relocate equipment
Establish digital twins of all equipment as well as full
mine and operations
Improve predictive analytics of equipment and mining
process performance
Fully digitalized operations with integrated
performance feedback loop
Link intelligent work place to integrated planning, scheduling
and dynamic simulation
Remote centers to operate remote equipment
Full autonomous parts of the operations
Automate the integration and management of renewable
energy integration
Electrification of all mining processes
Digitally intelligent grid to enable full load control and orchestration at mine level
Maximum penetration of renewable energy
Use cheap renewable energy to clean and recycle
water
Zero emissions fully electrified mining operation
Use Block-chain (BC) to track ore mined throughout
the value chain
Reward employees and partners with instant
payments
Track warranties on parts with BC individually
Sell metals and minerals directly to end customer with BC (Track, recycle and resell)
Fully transparent mining –operations, supply chain and
all external stakeholders
Introduce advanced purification and recycling technology to
reduce/eliminate tailing
Implement digital water monitoring and automated
management
Establish Block-chain logging of water quality
Extract valuable minerals from waste streams
1. Improve ore body knowledge
2. Integrated mine design, planning and
scheduling
3. Selective mining
4. Alternative hauling technologies
5. Modular mining
6. Integrated operations with intelligent work
environment
7. Automation
8. Electrification & renewable resources
9. Transact more efficiently
10. Improve Water Treatment & Management
Stochastic dynamic model of mining process based on plan
and schedule
Mine smaller, richer ore bodies with small footprint
Integrate wearables to create the performance
augmented worker
Automate back-office processes
Zero water environmental impact mining
1 2 3 4 5
11
6 7
8 9 10
12 13 14 15 16
17 18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39 40
41 42 43 44 45
46 47 48 49 50
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
Reduce core sampling
requirements
Adopt coil drill techniques
Improve real time data analyses
Improve blast hole analyses
Integrate ore sensing at the face
Implement multi-disciplinary analyses
Develop AI based ore models
Integrate all ore body data into one common spatial
database & planning pltfrm
Integrate common database of all resources
and capabilities
Integrate operational planning and scheduling with financial
systems to model system value
Explore continuous cutting machines for bulk mining
Develop high intensity blasting techniques for fragmentation control
Engineer ore sorting at the face and along the mining process to eliminate waste
Pre-concentration of ore inside the pit
Dedicated ore streams to selective processing to
reduce/eliminate blending
Decouple truck and shovel interface with loading buffer (surge loader)
Electric, modular truck/truck train (trolley assist/Battery hybrid)
Remote operation integrated with
autonomous hauling
Explore application of alternative technologies
(Rail-veyor/RopeCon, other)
Multi-modal system to optimize the flexibility and cost advantage
of different technologies
Develop modular equipment that can be containerized for easy
transport and on-site assembly
Use hybrid air vehicles to transport equipment
modules to remote sites
Avoid building road/rail infrastructure to remote
sites where viable
Decouple equipment life from life of the ore body.
Relocate equipment
Establish digital twins of all equipment as well as full
mine and operations
Improve predictive analytics of equipment and mining
process performance
Fully digitalized operations with integrated
performance feedback loop
Link intelligent work place to integrated planning, scheduling
and dynamic simulation
Remote centers to operate remote equipment
Full autonomous parts of the operations
Automate the integration and management of renewable
energy integration
Electrification of all mining processes
Digitally intelligent grid to enable full load control and orchestration at mine level
Maximum penetration of renewable energy
Use cheap renewable energy to clean and recycle
water
Zero emissions fully electrified mining operation
Use Block-chain (BC) to track ore mined throughout
the value chain
Reward employees and partners with instant
payments
Track warranties on parts with BC individually
Sell metals and minerals directly to end customer with BC (Track, recycle and resell)
Fully transparent mining –operations, supply chain and
all external stakeholders
Introduce advanced purification and recycling technology to
reduce/eliminate tailing
Implement digital water monitoring and automated
management
Establish Block-chain logging of water quality
Extract valuable minerals from waste streams
1. Improve ore body knowledge
2. Integrated mine design, planning and
scheduling
3. Selective mining
4. Alternative hauling technologies
5. Modular mining
6. Integrated operations with intelligent work
environment
7. Automation
8. Electrification & renewable resources
9. Transact more efficiently
10. Improve Water Treatment / Management
Stochastic dynamic model of mining process based on plan
and schedule
Mine smaller, richer ore bodies with small footprint
Integrate wearables to create the performance
augmented worker
Automate back-office processes
Zero water environmental impact mining
1 2 3 4 5
11
6 7
8 9 10
12 13 14 15 16
17 18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39 40
41 42 43 44 45
46 47 48 49 50
25 31 112 53
1
1
1
1
1
1
1
1
1
2
2
3
2
2
3
3
3
3
43
2
3
5
5
5
6
7
7 7
7
77 8
9 99
11
12
13
0
0
00
13
22
24
22
33
37
16
11
3
Permitting, Regulatory Database in GIS, transparency
of submitted information
11a3
Reclamation, Handle it once approach, integrate planning/operations for tailings and reclamation placement
Total Sum of
dots
CMIC Surface Mining RoadmapRed Number is sum of dots placed on each area.
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
CMIC Surface Mining Roadmap
1. Improve ore body knowledge
2. Integrated mine design, planning and
scheduling
3. Selective mining
4. Alternative hauling technologies
5. Modular mining
6. Integrated operations with intelligent work
environment
7. Automation
8. Electrification & renewable resources
9. Transact more efficiently
10. Improve Water Treatment / Management
25
13
22
24
22
33
37
16
11
3
Road Map sorted highest to lowest of number of
dots placed.
Total Sum of
dots
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
Reduce core sampling
requirements
Adopt coil drill techniques
Improve real time data analyses
Improve blast hole analyses
Integrate ore sensing at the face
Implement multi-disciplinary analyses
Develop AI based ore models
Integrate all ore body data into one common spatial
database & planning pltfrm
Integrate common database of all resources
and capabilities
Integrate operational planning and scheduling with financial
systems to model system value
Explore continuous cutting machines for bulk mining
Develop high intensity blasting techniques for fragmentation control
Engineer ore sorting at the face and along the mining process to eliminate waste
Pre-concentration of ore inside the pit
Dedicated ore streams to selective processing to
reduce/eliminate blending
Decouple truck and shovel interface with loading buffer (surge loader)
Electric, modular truck/truck train (trolley assist/Battery hybrid)
Remote operation integrated with
autonomous hauling
Explore application of alternative technologies
(Rail-veyor/RopeCon, other)
Multi-modal system to optimize the flexibility and cost advantage
of different technologies
Develop modular equipment that can be containerized for easy
transport and on-site assembly
Use hybrid air vehicles to transport equipment
modules to remote sites
Avoid building road/rail infrastructure to remote
sites where viable
Decouple equipment life from life of the ore body.
Relocate equipment
Establish digital twins of all equipment as well as full
mine and operations
Improve predictive analytics of equipment and mining
process performance
Fully digitalized operations with integrated
performance feedback loop
Link intelligent work place to integrated planning, scheduling
and dynamic simulation
Remote centers to operate remote equipment
Full autonomous parts of the operations
Automate the integration and management of renewable
energy integration
Electrification of all mining processes
Digitally intelligent grid to enable full load control and orchestration at mine level
Maximum penetration of renewable energy
Use cheap renewable energy to clean and recycle
water
Zero emissions fully electrified mining operation
Use Block-chain (BC) to track ore mined throughout
the value chain
Reward employees and partners with instant
payments
Track warranties on parts with BC individually
Sell metals and minerals directly to end customer with BC (Track, recycle and resell)
Fully transparent mining –operations, supply chain and
all external stakeholders
Introduce advanced purification and recycling technology to
reduce/eliminate tailing
Implement digital water monitoring and automated
management
Establish Block-chain logging of water quality
Extract valuable minerals from waste streams
1. Improve ore body knowledge
2. Integrated mine design, planning and
scheduling
3. Selective mining
4. Alternative hauling technologies
5. Modular mining
6. Integrated operations with intelligent work
environment
7. Automation
8. Electrification & renewable resources
9. Transact more efficiently
10. Improve Water Treatment / Management
Stochastic dynamic model of mining process based on plan
and schedule
Mine smaller, richer ore bodies with small footprint
Integrate wearables to create the performance
augmented worker
Automate back-office processes
Zero water environmental impact mining
1 2 3 4 5
11
6 7
8 9 10
12 13 14 15 16
17 18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39 40
41 42 43 44 45
46 47 48 49 50
3 2 2
3
4
3
4
2 1
2
71
6 3
3
5
6
Permitting, Regulatory Database in GIS, transparency
of submitted information
11a
Reclamation, Handle it once approach, integrate planning/operations for tailings and reclamation placement
CMIC Surface Mining Roadmap7
Total Sum of sticky’s
3
211
3
1
3
3
7
9
4
16
7
1
0
17
Red Number is sum of sticky notes with contact name placed on each area.
Additional Focus Area added.
Additional Focus Area added.
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
CMIC Surface Mining Roadmap
1. Improve ore body knowledge
2. Integrated mine design, planning and
scheduling
3. Selective mining
4. Alternative hauling technologies
5. Modular mining
6. Integrated operations with intelligent work
environment
7. Automation
8. Electrification & renewable resources
9. Transact more efficiently
10. Improve Water Treatment / Management 17
16
7
9
7
7
3
4
1
0
Road Map sorted highest to lowest, of number of areas of interest placed
(sticky notes with names).
Total Sum of sticky’s
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
CMIC Surface Mining Roadmap
1. Improve ore body knowledge
2. Integrated mine design, planning and
scheduling
3. Selective mining
4. Alternative hauling technologies
5. Modular mining
6. Integrated operations with intelligent work
environment
7. Automation
8. Electrification & renewable resources
9. Transact more efficiently
10. Improve Water Treatment / Management17
16
7
9
7
7
3
4
1
0
Introduce advanced purification and recycling technology to
reduce/eliminate tailing
Implement digital water monitoring and automated
management
Extract valuable minerals from waste streams
Zero water environmental impact mining
4648 49507 16 3
Establish digital twins of all equipment as well as full
mine and operations
Improve predictive analytics of equipment and mining
process performance
Fully digitalized operations with integrated
performance feedback loop
Integrate wearables to create the performance
augmented worker
2728 293046 33
Reduce core sampling
requirements
Integrate ore sensing at the face
Develop AI based ore models
4 5 73 2 2
Explore continuous cutting machines for bulk mining
Engineer ore sorting at the face and along the mining process to eliminate waste
12 144 3
Multi-modal system to optimize the flexibility and cost advantage
of different technologies
213
Electric, modular truck/truck train (trolley assist/Battery hybrid)
Remote operation integrated with
autonomous hauling
Explore application of alternative technologies
(Rail-veyor/RopeCon, other)
18 19 203 2 1
Remote centers to operate remote equipment
Full autonomous parts of the operations
33 3425
Use cheap renewable energy to clean and recycle
water
391
Develop modular equipment that can be containerized for easy
transport and on-site assembly
Use hybrid air vehicles to transport equipment
modules to remote sites
Decouple equipment life from life of the ore body.
Relocate equipment
22 23252 11
Stochastic dynamic model of mining process based on plan
and schedule
113
Total Sum of sticky’s
Red Number is sum of sticky notes placed on each area.
Items with no sticky notes not included.
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
CMIC Surface Mining Roadmap10. Improve Water
Treatment / Management17Introduce advanced purification
and recycling technology to reduce/eliminate tailing
Implement digital water monitoring and automated
management
Extract valuable minerals from waste streams
Zero water environmental impact mining
4648 49507 16 3
48
50
49
46
First Name Last Name Email Job Title CompanyKim Kasperski [email protected] Director Natural Resources CanadaFernanda Motta [email protected] Research Scientist CanmetENERGYMichael Tate [email protected] Marketing & Technical Manager Graymont Inc.Paul Cavanagh [email protected] Sr Technical Advisor ImperialTara Wang [email protected] Senior Tailings Engineer Alberta Energy RegulatorJean-Francois Bouffard [email protected] Director of Business Development NAIT Centre for Oil Sands SustainabilityAndrea Sedgwick [email protected] Ledcor Applied Research Chair NAIT
First Name Last Name Email Job Title CompanyKim Kasperski [email protected] Director Natural Resources Canada
First Name Last Name Email Job Title CompanyDean Robertson [email protected] Director Energy & Resources StantecGary White [email protected] Executive Director Alberta EnergyZvonko Burkus [email protected] Mine Water Policy Specialist Alberta Environment & Parks
First Name Last Name Email Job Title CompanyChelsea Fedrau [email protected] Environmental Assessment Officer Canadian Environmental Assessment AgencyAlebachew Demoz [email protected] Research Scientist NRCanHans Wolf [email protected] Specialist, Industrial, Energy & Mining Associated EngineeringKevin Turner [email protected] Manager, Process Engineering Wood Canada Ltd.Tara Wang [email protected] Senior Tailings Engineer Alberta Energy RegulatorKim Kasperski [email protected] Director Natural Resources Canada
Focus Group AreaP COSIA P CMIC P GMG P U of A
Contact Information for Areas of Interest
Total Sum of sticky’s
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
CMIC Surface Mining Roadmap6. Integrated operations
with intelligent work environment
16Establish digital twins of all equipment as well as full
mine and operations
Improve predictive analytics of equipment and mining
process performance
Fully digitalized operations with integrated
performance feedback loop
Integrate wearables to create the performance
augmented worker
2728 293046 33
First Name Last Name Email Job Title CompanyCorey McIvor [email protected] Senior Vice President Ledcor GroupNathan Ashcroft [email protected] StantecTravis Fischer [email protected] Implementation Engineer SMS EquipmentBrent Davis [email protected] VP Oil Sands and Mining solutions Finning CanadaBrent Boutilier [email protected] Sr Project Manager Syncrude Canada LTD.Jason Diniz [email protected] Manager, Mining Support SMS Equipment
28
First Name Last Name Email Job Title CompanyChelsea Fedrau [email protected] Environmental Assessment Officer Canadian Environmental Assessment AgencyJean-Francois Bouffard [email protected] Director of Business Development NAIT Centre for Oil Sands SustainabilityAndrea Sedgwick [email protected] Ledcor Applied Research Chair NAITBryce Monar [email protected] Corporate Engineering Manager Wood Canada Ltd.
27
First Name Last Name Email Job Title CompanyAli Chamanara [email protected] Lead Engineer, Mine Engineering CNRLTravis Fischer [email protected] Implementation Engineer SMS EquipmentBrent Boutilier [email protected] Sr Project Manager Syncrude Canada LTD.
30
29 First Name Last Name Email Job Title CompanyBryn Upham [email protected] Mining Engineering Co-op Student 3rd Year MIAC Student RepresentativeGerald Desrochers [email protected] Senior Director Western Canada CIMA Canada Inc.Brent Boutilier [email protected] Sr Project Manager Syncrude Canada LTD.
Contact Information for Areas of Interest
Total Sum of sticky’s
Focus Group AreaP COSIA P CMIC P GMG P U of A
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
CMIC Surface Mining Roadmap4. Alternative hauling
technologies
7. Automation
9
7
Multi-modal system to optimize the flexibility and cost advantage
of different technologies
213
Electric, modular truck/truck train (trolley assist/Battery hybrid)
Remote operation integrated with
autonomous hauling
Explore application of alternative technologies
(Rail-veyor/RopeCon, other)
18 19 203 2 1
Remote centers to operate remote equipment
Full autonomous parts of the operations
33 3425
First Name Last Name Email Job Title CompanyMike Anderson [email protected] R&D Reliability Team Leader Syncrude Canada Ltd.Greg Forgeron [email protected] HO Mining Reseach Manager ImperialClint Webster [email protected] Account Manager - Mining Alberta Brandt
21
18
First Name Last Name Email Job Title CompanyBrent Boutilier [email protected] Sr Project Manager Syncrude Canada LTD.Jason Diniz [email protected] Manager, Mining Support SMS Equipment
19
First Name Last Name Email Job Title CompanyAli Chamanara [email protected] Lead Engineer, Mine Engineering CNRL
20
33
34
First Name Last Name Email Job Title CompanyCalvin Batog [email protected] Chief Estimator Fort McKay Group of Companies LPRandy Gogowich [email protected] Heavy Equipment & Rentals MetalGerald Desrochers [email protected] Senior Director Western Canada CIMA Canada Inc.Bryce Monar [email protected] Corporate Engineering Manager Wood Canada Ltd.Brent Boutilier [email protected] Sr Project Manager Syncrude Canada LTD.
First Name Last Name Email Job Title CompanyMuneer Naseer [email protected] Director of Mines Occupational Health & Safety BranchBrent Boutilier [email protected] Sr Project Manager Syncrude Canada LTD.
First Name Last Name Email Job Title CompanyClint Webster [email protected] Account Manager - Mining Alberta BrandtBrent Davis [email protected] VP Oil Sands and Mining solutions Finning CanadaBrent Boutilier [email protected] Sr Project Manager Syncrude Canada LTD.
Contact Information for Areas of Interest
Total Sum of sticky’s Focus Group Area
P COSIA P CMIC P GMG P U of A
Focus Group AreaP COSIA P CMIC P GMG P U of A
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
CMIC Surface Mining Roadmap1. Improve ore body
knowledge
3. Selective mining
7
7
Reduce core sampling
requirements
Integrate ore sensing at the face
Develop AI based ore models
4 5 73 2 2
Explore continuous cutting machines for bulk mining
Engineer ore sorting at the face and along the mining process to eliminate waste
12 144 3
First Name Last Name Email Job Title CompanyDean Rokosh [email protected] Advisor, Energy and Minerals AER/AGGary Bunio [email protected] GM Strategic Technology SuncorMike Anderson [email protected] R&D Reliability Team Leader Syncrude Canada Ltd.
4
First Name Last Name Email Job Title CompanyMark Dekaban [email protected] Mining Research Lead ImperialJean-Francois Bouffard [email protected] Director of Business Development NAIT Centre for Oil Sands Sustainability
5
First Name Last Name Email Job Title CompanyAndrea Sedgwick [email protected] Ledcor Applied Research Chair NAITMark Dekaban [email protected] Mining Research Lead Imperial
7
First Name Last Name Email Job Title CompanyGreg Forgeron [email protected] HO Mining Reseach Manager ImperialTerry Condon [email protected] Business Development Argus Machine Co. Ltd.Michael Di Marco [email protected] Manager Mine Engineering Teck Resources LimitedMark Dekaban [email protected] Mining Research Lead Imperial
12
14 First Name Last Name Email Job Title CompanyMark Dekaban [email protected] Mining Research Lead ImperialAndrea Sedgwick [email protected] Ledcor Applied Research Chair NAITKeith Wilson [email protected] Stantec
Contact Information for Areas of Interest
Total Sum of sticky’s
Focus Group AreaP COSIA P CMIC P GMG P U of A
Focus Group AreaP COSIA P CMIC P GMG P U of A
Mining Industry Advisory Committee Research Summit Alberta Chamber of Resources January 31, 2019
CMIC Surface Mining Roadmap
2. Integrated mine design, planning and
scheduling
5. Modular mining
8. Electrification & renewable resources
3
4
1Use cheap renewable
energy to clean and recycle water
391
Develop modular equipment that can be containerized for easy
transport and on-site assembly
Use hybrid air vehicles to transport equipment
modules to remote sites
Decouple equipment life from life of the ore body.
Relocate equipment
22 23252 11
Stochastic dynamic model of mining process based on plan
and schedule
113
First Name Last Name Email Job Title CompanyCorey McIvor [email protected] Senior Vice President Ledcor Group
39
First Name Last Name Email Job Title CompanyClint Webster [email protected] Account Manager - Mining Alberta Brandt
22
First Name Last Name Email Job Title CompanyMichael Di Marco [email protected] Manager Mine Engineering Teck Resources Limited
23
25
First Name Last Name Email Job Title CompanyGeorge Rhodey [email protected] White [email protected] Industrial Professor Faculty of Engineering, U of AAlebachew Demoz [email protected] Research Scientist NRCan
11
First Name Last Name Email Job Title CompanyBrent Boutilier [email protected] Sr Project Manager Syncrude Canada LTD.Mike Anderson [email protected] R&D Reliability Team Leader Syncrude Canada Ltd.
Contact Information for Areas of Interest
Total Sum of sticky’s
Focus Group AreaP COSIA P CMIC P GMG P U of A
Focus Group AreaP COSIA P CMIC P GMG P U of A
Focus Group AreaP COSIA P CMIC P GMG P U of A
