MEC PFT Systems Ergo-Spirometry ERGO 100 · MEC PFT Systems Ergo-Spirometry ERGO 100 Fast and...
Transcript of MEC PFT Systems Ergo-Spirometry ERGO 100 · MEC PFT Systems Ergo-Spirometry ERGO 100 Fast and...
”Since 1984 Manufacturer & Distributor
of Respiratory & Cardio Respiratory Devices”
MEC PFT Systems Ergo-Spirometry
ERGO 100
Fast and reproducible
results
Long lasting and accurate
Infra-Red and solid state
gas analyzers
Variable Orifice Membrane
pneumotachometer VOM
Integrated 12 Leads ECG
Nutritional assessment
Enhanced spirometry
software with P01, Rocc,
Reversibility ...
MEC R&D is part of the MEC Group
Ergo100
Simple, Fast, Accurate
Graphical display of the patient
optimal training program .
Selection between manual and
automatic stress process control is possible at any time.
Software assistant generates and store any stress testing profile
quickly.
Determination of the anaerobic threshold can be selected: V-Slope, CO2 - excess, EQ O2 - minimum, RQ=1 or simple
manual adjustment at any time.
Pos t-cond i t ion ing o f a l l recorded measurements.
Monitoring limits of all desired parameters including alarm functions.
Manual input of external measured data during
and after measurement.
Online transfer of blood pressure, BGA and
SpO2 measured data to the measurement protocol.
Automated interpretation scheme according to Wasserman.
Simultaneous screen display of up to 40 parameters on separate graphical
windows. The data final report is freely configurable in MS Word, displaying the desired parameters
via the assistance of numeric tables or graphics. All the reports may be saved as Word document or PDF, RTF, XML, HTML ...
The PDI software will take care to export the data and reports to your central Medical System ie. XML, HL7 , GDT/BDT... More than 10 communication protocols are available.
Breath by breath ...
The PFT O2 and CO2 gas-analyzers offer fast response time and highly accurate
measuring values. Ideal conditions for real “breath by breath” measurements. The 2-points gas calibration with economic gas consumption not only performs a fully
automated calibration of the analyzers, but additionally calibrates the total resistance of the gas sampling circuit.
At the same time the program continuously monitors the quality of the gas-analyzers.
Down to the smallest detail it is adapted to the special requirements for Spiro-ergometry.
The bidirectional VOM (Variable Orifice Membrane) pneumotachograph weighs only 32 grams, has a small dead space volume and is absolutely insensitive to moisture.
Neither breath moisture nor water droplets can influence the measurement. After cleaning, it is immediately ready for use.
The shape of the flow sensor lamellas and the housing were mathematically optimized
and guarantees a linear characteristic over the entire measuring range up to 15 l/s
Spirometry and ECG 12 leads are
simultaneously measured and displayed on two separate screens.
Trolley with stand and housing
equipped with a fast response semi-
conductor oxygen analyzer and a fast response infrared carbon-
dioxide analyzer.
Volume measurement is made
with a very lightweight and precise bi-directional digital volume
transducer which can be placed directly at the mouth of the patient or by a face mask. The sensor is
insensitive to water vapour and breathing gases; dead space is low
(30 mL).
Calibration system is integrated for volume and flow and fully automatic for the gas analyzers.
Medical Electronic Construction R&D sprl Phone + 32(0) 2 558.00.60
Rue Prévinaire 64 Previnairstraat Fax + 32(0) 2 558.00.69 EN ISO 9001 EN ISO 13485
Bruxelles 1070 Brussel - BELGIUM e-mail [email protected]
Web www.mecbelux.com 2009_ERGO10_EN_RevA
ERGOSPIROMETRY Breath by Breath
CO2 Analyzer
High-speed analyzer based on the infrared absorption principle Range 0 - 15% Accuracy 0.05% Resolution 0.01% Stability 0,02%/h Min. rise time T10-90 80ms
O2 Analyzer
High-speed analyzer based on Solid State sensor Range 0 - 25% 0 - 60% 0-100% Accuracy 0.05% Resolution 0.01% 0.02% Stability 0.02%/h Min. rise time T10-90 70ms
Hardware and Software
12-channel ECG (option) Ventilation measurement via a highly-precise, bidirectional digital volume sensor (VOP) Automatic calibration Pentium computer Ink-jet printer or Laser Jet MS-Windows™ XP, 2000 Interface for peripheral equipment
Measurement Range
Ventilation (V’E) 0 to 300 l/min 2% or 0.05 l/min O2 uptake (V’O2) 0 to 7 l/min 3% or 0.05 l/min CO2 output (V’CO2) 0 to7 l/min 3% or 0.05 l/min RER 0.6 to 2.0 4%
SPIROMETRY
Flow measurement Variable orifice membrane
Range ±0.02 – ±20l/s
Accuracy 0.05 – 15l/s ±2%
Resistance < 0.01 kPa/(l/s) at 10 l/s
Resolution < 5ml
Back pressure <0.93kPa at 14l/s
Volume determination
digital integration
Range 0 - ± 20 l/s
Accuracy 5 ml
Certification / Safety standards:
93/42/EEC Medical Device Directive
EN60601-1 General Requirements for Safety
EN60601-1-1 Safety Requirements for Medical Electrical Systems
EN60601-1-2 Electromagnetic compatibility
CE approval:
Final inspection and test of cardiopulmonary function test equipment in class I (93/42/EEC Annex VI Section 3.2 - Product quality assurance)
Your distributor: