5/13

Measuring Guide for Scarves

Tools and Tips• Steel tape measure—donot

useclothtape

• Pencil•Round measurements

tothenearest1/8"1/8"1/4"3/8"1/2"5/8"3/4"7/8"

Measurewidthofwindow,plustheamountthescarfistoextendtothewall.

Measurethedistanceyouwantthescarftodropdownontheleftandrightsides.

Addthesefigurestogethertogettheapproximatescarflength(rounduptothenearestfullinch).

Add18"-30"ifplanningtoloopthescarfaroundthecurtainrodordropitinthecenter

Ifgoingtothefloorwithoneorbothsidesandwishtopuddletheendsofthescarf,

addanadditional6"-10"perside.

1

4

5

3

2

Measuring Guidelines

5

2

1

5/13

Measuring Guide for Board-Mounted Top Treatments

Outside Mount

Tools and Tips• Steel tape measure—donot

useclothtape

• Pencil•Round measurements

tothenearest1/8"1/8"1/4"3/8"1/2"5/8"3/4"7/8"

Inside Mount

Board-mounted Top Treatments

Choose a Mount Type: Inside Mount or Outside Mount

Measuretheexactwidthofthewindowopeningattheverytopofthecasing(figure1).

Measuretheexactwidthofthewindowopeningdownfromthetop,dependingonthedesireddropoftoptreatmentsbeingordered.

Note: Measure twice and document the smaller dimension, as not all window openings are perfectly square.

1

2

Widthwidth

width

1

2

Figure 2 Figure 3Figure 1

Add additional width

Window width

Measurewindowwidthincludingmolding(seefigure2).

Addanyadditionalwidthdesired,especiallyifhangingcurtainpanelsorsheersundercornice(figure3).

1

2

Top view of corniceOrdered width

Face width will be approximately 1⁄8" wider than

ordered width

Measuredepthofwindowcasingtodetermineifitwillaccommodateaninsidemount.Aninsidemountcornicehasadepthof3"(mountingboard/dustcover).

Determineinsideoroutsidemount

Note: Outside mount face width will be approximately 1⁄8" wider than the ordered width*

1

2

Kick Pleat

Citadel

Inside Mount (side view)Outside Mount (side view)

Note: Inside back width of style Soft Fold with Ties will be approximately 1" narrower than ordered width.

C1

RL

Angle C1-RAngle L-C1

C1

L

C1 R

Business cards Business cards

How to Measure for Bay and Corners for Top TreatmentsMeasure bay angle using protractor or angle finder, or use two business cards in bay corner as illustrated.

C1

L

C2

R

LR

C1

LC1

Shown without projection*

Angle L-C1

Business Cards or Index Cards

L and R: Width of each side window from the corners on the mounting surface to the point you would like to cover.

C1: Width of the center window on the mounting surface from corner to corner.

Angle L-C1: Angle between the (L) and (C1) windows.Angle C1-R: Angle between the (C1) and (R) windows.

Measure:

*Projection = return size ordered