MDS NETio - GE Grid Solutions · Increase I/O capacity of remotes with expansion modules...
4
Digital Energy MDS g imagination at work The MDS NETio is an integrated, scalable family of wireless solutions that provide long distance unlicensed communications, allowing users to interface both analog and digital I/O including sensors for pressure and flow as well as controls for pumps or alarms. NETio can wirelessly regenerate I/O signals or use standard IP/Ethernet and serial protocols to communicate with controllers such as PLCs, RTUs and SCADA systems. • Direct connectivity to analog and digital devices without the need for a controller • Unlicensed long range communication of IP/Ethernet or serial data • Supports multiple industry-standard protocols including Modbus TCP and DNP3 • Reduces the high cost of wiring and terminations • Reduces integration, configuration, and support costs found with multi-box solutions • Seamless connectivity to network access points Data Acquisition | Flexible Wireless I/O Application Specific Wireless Solution Oil & Gas Heavy Industrial Energy • Real-time circuit trip control for distributed generation sites • Condition monitoring for pole-top circuit breakers and capacitor banks • Remote monitoring of pipeline flow and status signals • Monitor and transmit wellhead pressure and tank levels to RTUs • Activation of perimeter gates based on detection of vehicle • Monitor and control remote pumps and compressors • Low-cost, low-power tank level monitoring for remote locations • Control pumps across multiple sites from central PLC Water & Wastewater Key Benefits Industrially Hardened Secure • Authorized access point and remote lists prevent unauthorized access • Password protected access and lockdown • Built-in 128-bit encryption Application Flexibility • Handles diverse I/O configurations including analog 4-20 mA, 0-5 V or 0-10 V and digital 5-36 VDC • Long range wireless communication up to 30 miles (900 MHz) and 15 miles (2.4 GHz) • Wirelessly expand I/O coverage 3,000 feet using the 802.15.4 wireless option • IP/Ethernet, serial and I/O functions simultaneously on the same network • Backwards compatible with entraNET and TransNET networks Reliable & Scalable • License-free spread spectrum technology in both 900 MHz and 2.4 GHz bands • Point-to-Multipoint, 2-way communication • High receive sensitivity for noisy environments and long distances • Handles multiple industry protocols including Modbus, Modbus-TCP, and DNP3 • Operation in extreme temperatures from –40 o C to 70 o C • Class I, Div 2 hazardous location approval • Fully-isolated I/O NETio Analog and Digital I/O
Transcript of MDS NETio - GE Grid Solutions · Increase I/O capacity of remotes with expansion modules...
Digital EnergyMDS
g imagination at work
The MDS NETio is an integrated, scalable family of wireless solutions that provide long distance unlicensed communications, allowing users to interface both analog and digital I/O including sensors for pressure and flow as well as controls for pumps or alarms. NETio can wirelessly regenerate I/O signals or use standard IP/Ethernet and serial protocols to communicate with controllers such as PLCs, RTUs and SCADA systems.
• Directconnectivitytoanaloganddigitaldeviceswithouttheneedforacontroller
• UnlicensedlongrangecommunicationofIP/Ethernetorserialdata
• Supportsmultipleindustry-standardprotocolsincludingModbusTCPandDNP3
• Reducesthehighcostofwiringandterminations
• Reducesintegration,configuration,andsupportcostsfoundwithmulti-boxsolutions
• Seamlessconnectivitytonetworkaccesspoints
DataAcquisition|FlexibleWirelessI/O
ApplicationSpecificWirelessSolution
Oil & Gas
Heavy Industrial
Energy
• Real-timecircuittripcontrolfordistributedgenerationsites
• Conditionmonitoringforpole-topcircuitbreakersandcapacitorbanks
• Remotemonitoringofpipelineflowandstatussignals
• MonitorandtransmitwellheadpressureandtanklevelstoRTUs
• Activationofperimetergatesbasedondetectionofvehicle
• Monitorandcontrolremotepumpsandcompressors
• Low-cost,low-powertanklevelmonitoringforremotelocations
• ControlpumpsacrossmultiplesitesfromcentralPLC
Water & Wastewater
Key Benefits
Industrially Hardened
Secure• Authorizedaccesspointandremotelists
preventunauthorizedaccess
• Passwordprotectedaccessandlockdown
• Built-in128-bitencryption
ApplicationFlexibility• HandlesdiverseI/Oconfigurations
includinganalog4-20mA,0-5Vor0-10Vanddigital5-36VDC
• Longrangewirelesscommunicationupto30miles(900MHz)and15miles(2.4GHz)
• WirelesslyexpandI/Ocoverage3,000feetusingthe802.15.4wirelessoption
• IP/Ethernet,serialandI/Ofunctionssimultaneously on the same network
• BackwardscompatiblewithentraNETandTransNET networks
Reliable & Scalable• License-freespreadspectrumtechnology
inboth900MHzand2.4GHzbands
• Point-to-Multipoint,2-waycommunication
• Highreceivesensitivityfornoisyenvironments and long distances
• HandlesmultipleindustryprotocolsincludingModbus,Modbus-TCP,andDNP3
• Operationinextremetemperaturesfrom–40oCto70oC
• ClassI,Div2hazardouslocationapproval
• Fully-isolatedI/O
NETioAnalog and Digital I/O
26
NETio
www.GEDigitalEnergy.com
I/OExtension WirelessExpansionProtocol Communications
NETio Application Advantages
• WirelesslyexpandI/OcapacitiesofNETioRemotes to connect additional I/O signals
• CoverI/Osignalswithin3,000feetwithNETioexpansionmoduleswith802.15.4WeXP
• CombineprotocoladdressableI/OandI/Oextensiononthesamenetwork
• NETiocanbeusedtoregenerateI/Osignals between sensors and PLCs
• Inputsignalscanbemappedtooutputsanywhere in a NETio network
• NETioprovidesIP/Ethernetandserialdatacommunications for attached PLC or RTU
ApplicationFlexibilityTheMDSNETio family of industrial-strength data communicationsproducts fromGEoffer secure, reliable, longdistance transmissionof data for your mission critical applications. The NETio operates in license-free900MHzor2.4GHzspreadspectrumfrequenciesandhasbuilt-inI/Oforawidevarietyofmarketapplications.
The NETio solution acquires, transports and delivers I/O signal data, and interfaces directly to a wide variety of I/O without the need for a controller. NETio offers a quickly deployed low cost alternative to wires. In many industrial applications, it is impossible or cost prohibitive to run hardwired circuits between inputs and outputs.
Protocol AddressabilityNETio interfaces I/O from sensors and devices using multiple industrial protocolsincludingModbusRTU,ModbusTCPandDNP3.ThisallowsaSCADA system or host controller to communicate directly with NETio using IP/Ethernet or serial protocols when PLCs and RTUs are not necessary.NETioallowsserialcommunicationusingDNP3orModbusRTUwithouttheneedforanaccesspointforsimplepoint-to-multipointapplicationsbetweenremotesoroverWeXP.
I/OExtensionUsing I/O extension, NETio regenerates analog and digital signalsbetween multiple field devices and controllers resulting in significant savingsonwiringandterminationcosts.NETiosupportscost-effectiveremotetoremotecommunicationforsmallpoint-to-pointorpoint-to-multipoint requirements that do not require an access point
IP/Ethernet and Serial CommunicationsInaddition to I/Oextensionandprotocoladdressability,NETioalsosupports IP/Ethernet and serial communication over long distance between SCADA systems and RTUs or PLCs. Use the NETio Access Point whenever IP/Ethernet communications are required.
Backwards CompatibilityNETio can serve as the wireless access point to a central control station for remote NETio units in the field. In applications where wireless network infrastructure already exists, NETio Remotes canstill be deployed, as they are compatible and interoperable with MDS TransNET and MDS entraNET wireless access points.
• NETiosupportsmultipleprotocolsincludingModbusRTU,ModbusTCP,andDNP3
• ProvidesIP/Ethernetandserialcommunication to SCADA hosts and HMIs
• Accommodatesmultipleprotocolsfordiverse devices and I/O signals on the same IP/Ethernet network
Remote
Expansion
Expansion
Remote
Tank LevelSCADAPLC
Pressure
Current Tank Level
SCADAAccess Point
Up to 30mi
RemoteSensors
Tank Level
Pressure
Current
I/O from remote sensors to SCADA host
Access Point
Wirelessly extend I/O from the field to PLCs and RTUs
PLC/RTURemoteRemoteSensors
27
NETio
www.GEDigitalEnergy.com
ExpansionModuleExpansionModulesexpand thenumberof I/Opoints tomeetyourrequirements. Expansion Modules can be connected directly tothe NETio via a fully integrated power/communication backplane connectorortheycanbelocatedupto3,000feetawayandwirelesslyconnect to NETio overWeXP. Expansion Modules are available in6differentconfigurationsanddeliverconnectivityforupto128I/Osignals at any one location.
Accessories & Custom EnclosuresGEMDSprovidesacompletelineofreliableindustrial-strengthandcost effective accessories that are tested to perform at optimal levels andmaintain product warranties. GE MDS offers both standardand custom packages for wireless applications in harsh industrial environments.Wesimplifyyourwirelesssystemsdesignbyprovidingaconvenientsingle-sourceorderingprocess.FromantennasfortheNETio(900MHzand2.4GHz)tofield-ratedpowersuppliesforyourmissioncriticalapplication,GEMDScanhelpensureyoursystemisrobustandfuture-proof.
Expansion modules connected via backplane
Increase I/O capacity of remotes with expansion modules
Accessories for the NETio
View Accessories catalog at www.gemds.com
Wireless expansion modules connected via 802.15.4
Digital and analog I/O
Rugged industrial housing
Digital and analog I/O
Backplane expansion connector
User-friendly LED status indicators
RJ11 Serial (configuration only)
Optional Antenna for WeXP (wireless expansion modules)
Access PointWhenyourequireprotocoladdressabilityusingModbusTCPorDNP3viaTCP,orutilizeIP/EthernetonyourSCADAnetworkandotherappli-cations,NETiousesanaccesspoint formaximumperformance. TheNETioaccesspointprovideslongrange,peer-to-peer,securewirelessIP/Ethernetandserialcommunicationplusnetwork-wideconfigurationfromasinglelocation.Theaccesspointalsoallowsyoutomixmodesof communication and multiple protocols on the same network.
RJ45 IP/Ethernet User-friendly LED status indicators
RJ 45 SerialRJ 11 Serial
Power in (10-30 Vdc)
Antenna for 900 MHz or 2.4 GHz
RemoteNETio isavailable inthe900MHzor2.4GHzfrequencybandsfor IP/Ethernetandserialcommunication. EachNETiohasbuilt-inconnec-tions for one analog input, one analog output, two digital inputs and two digital outputs. Each NETio can be configured for multiple operat-ingmodesincludingI/OextensionforregeneratingI/Osignalsbetweendevices, protocol addressability for interfacing I/O using industry-standardprotocols(e.g.,Modbus-TCP),andSCADAcommunicationstoremote RTUs and PLCs using IP/Ethernet and a NETio Access Point.
Digital and analog I/O
Rugged industrial housing
User-friendly LED status indicators
RJ45 IP/Ethernet
Optional Antenna for WeXP (wireless expansion modules)
RJ 45 Serial
Antenna for 900 MHz or 2.4 GHz
Digital and analog I/O
900 MHz 2.4 GHz
Fixed Remote Kit with Yagi KFR-N09-D1 KFR-N24-E1
WeXP antenna 97-4278-A10 97-4278-A10
Power Supply (ACInput) 01-3682A02 01-3682A02
28
NETio
www.GEDigitalEnergy.com
NETio Remote
NETio Access Point
Order Code Example
Order Code Example
NETioExpansionModule
Visitwww.GEMDS.com/NETiotodownloadNETioresources
090128-v42
Specifications
Ordering
GENERALAccess Point Power
10-30Vdc
Remote Power 6-30VdcCurrent <450mATransmit,<180mA
receive(@13.8Vdc)Temperature -40oCto+70o CHousing(Remote) High-impactplasticHousing(AccessPoint)
Die-castAluminum
Mounting 35mmDINrail(Remote),FlatPanelorDIN(AccessPoint)
AccessPointSize 3.15Hx17.2Wx11.2Dcm.(1.25Hx6.75Wx4.5Din.)
RemoteSize 14.6Hx4.14Wx11.4Dcm.(5.75Hx1.63Wx4.5Din.)
ExpansionSize 14.6Hx3.0Wx11.4Dcm.(5.75Hx1.18Wx4.5Din.)
Access Point Weight
635g(1.4lb.)
RemoteWeight 226g(0.5lb.)NETIO B MOdELCompatibility MDS entraNET networks & API/O Capacity 1analoginput,1analog
output,2digitalinputs,2digital outputs
Ethernet Port OneRJ4510baseT,10Mbps,requires NETio Access Point
Serial Port OneRJ-45,RS232,1.2to115.2kbps
I/Oextension Network-wide(Accesspoints,remotes,expansionmodules)
Protocols Serial(ModbusRTUandDNP3);Ethernet(DNP3,Modbus-TCP)requires NETio Access Point
NETIO T MOdELCompatibility MDS TransNET & MasterI/O Capacity 1analoginput,1analog
output,2digitalinputs,2digital outputs
Serial Ports TwoRJ45,RS-232,1.2to115.2kbps
I/OExtension OverWeXPoptiononlyProtocols Modbus RTU900 MHz OPTIONData Rate 106kbps(EB);115kbps(TB)Frequency 902-928MHzISMbandMode Frequency Hopping Spread
SpectrumRange Upto30milesAntenna TNC femaleSystemGain 136dBCarrier Power 0.1to1.0watts(20to30dBm)Receiver Sensitivity -106dBm(1x10-6BER)2.4 GHz OPTIONData Rate 106kbpsFrequency 2.4016–2.4778GHzISMbandMode Frequency Hopping Spread
SpectrumRange Upto15milesAntenna TNC femaleSystemGain 131dBCarrier Power .05to.5watts(17to27dBm)Receiver Sensitivity -104dBm(1x10-6BER)
WeXP OPTION (BASEd ON 802.15.4)Frequency 2.4to2.4835GHzRange Upto3,000ft .Antenna SMA femaleCarrier Power 10-60mW(10to18dBm)TXPower 27dBmReceiver Sensitivity -100dBm(1%packeterror)ANALOG INPuTSTypes 4-20mA,0-5vDC,0-10vDC,
.1-5vDCAccuracy 0.1%(fullscaleVorI)A/D Resolution 22bitIsolation 1400Vinputtopower(not
isolatedonNIOXM-6)ANALOG OuTPuTSTypes 4-20mA,0-5V,0-10VAccuracy 0.2%(fullscaleVorI)Isolation 1400VoutputtopowerD/A resolution 16bitsdIGITAL INPuTSType 5-36VDCIsolation 3000VtochassisgrounddIGITAL OuTPuTSType FET relayHoldOffVoltage 36vDCLoad 2Acontinuous(peroutput)Isolation 3,700VtochassisgroundAGENCY APPROvALSFCC Part15.247Industry Canada RSS210CSA Class1,Div.2groupsA,B,C,D
forhazardouslocations(ANSI/UL equivalent
NETIO * -MD * 11 * BFC10NModel B SerialandEthernetRemote(NETioandentraNETAccessPointcompatible)
T SerialRemote(TransNETAccessPointcompatible)Frequency 9 MDS900MHzlongrange,upto30miles
2 MDS2.4GHzlongrange,upto15miles(OnlywithBmodel)WirelessExpansion W WeXPshort-rangewirelessoption(upto3,000ft .)
N NoWeXPshort-rangewireless
NETIOA-MD * F * * NETioSerial/EthernetAccessPoint-entraNETmodelFrequency 9 MDS900MHzlongrange,upto30miles
2 MDS2.4GHzlongrange,upto15milesMounting S Standard Brackets
A DIN RailNetwork Management 1 Enable
0 Disable
NETIOE-MDN1 * * NFC00NI/O config 1 1Analoginput(VorI),1Analogoutput(I),2Digitalinputs,2Digitaloutputs
2 6Digitalinputs3 6Digitaloutputs4 2Analoginputs(VorI),4Digitalinputs6 2Analoginputs(V,non-isolated),2Analogoutputs(V,non-isolated),
2Digitalinputs,2Digitaloutputs7 2Analoginputs(I),1Digitalinputs,3Digitaloutputs
WirelessExpansion W WeXPshort-rangewirelessoption(upto3,000ft .)N NoWeXPshort-rangewireless
NETIOB-MD911WBFC10N
NETIOE-MDN16WNFC00N
•Remote •SerialandEthernet •entraNET-based900MHz •Wirelessexpansion
Order Code ExampleNETIOA-MD9A1
•AccessPoint(Serial/Ethernet) •entraNET-based900MHz •DINrailmounting •Networkmanagement
•Expansionmodule •4AnalogI/O •4DigitalI/O •Wirelessexpansion
