MDF-500: All there is to know

Contents

WHAT IS MDF-500? .............................................................................................................................................. 2

HOW DOES MDF-500 WORK? ............................................................................................................................... 3

EFFECTIVE AGAINST ............................................................................................................................................. 4

WHERE TO USE .................................................................................................................................................... 5

HOW IS MDF-500 APPLIED? .................................................................................................................................. 6

THE "DECONOMICS" OF USING MDF-500 IN COMMERCIAL & LARGE LOSS ............................................................. 7

FREQUENTLY ASKED QUESTIONS .......................................................................................................................... 8

What is MDF-500? MDF 500 is a patented, monetary chemical and pathogen product, developed by the United States Department of

Defence with research and development at Sandia National Laboratory.

The MDF -500 function is environmentally benign (non-toxic and non –corrosive), and works on all materials and

surfaces.

MDF -500 chemistry was specifically designed for the decontamination and mitigation of chemical and biological

pathogens to include the following

How does MDF-500 work? MDF-500's decontamination formula is a complex mixture of organic and inorganic chemicals that produce

simultaneous reactions that can destroy both chemical and biological materials on contact. Chemical formulas, such

as MDF-500, that destroys spore-forming microorganisms is called a Sporicide, to be synonymous with the term -

Sterilizer. A sterilizer is an antimicrobial chemical formula that destroys or eliminates all form of microbial life in the

inanimate environment, including bacterial spores. Bacterial spores are the most difficult of all microorganisms to

destroy. Therefore, if a formula can destroy spores it can eradicate all types of microorganism (all types of bacteria

fungi, mold, viruses and spores).

Why MDF-500 Works so Well

The Quaternary Amines in part A penetrate the cell wall

The Hydrogen Peroxide in part B then oxidizes critical sub-stances inside the cell

MDF 500 provides two steps in one application

MDF 500 then "weighs " down spores, they drop to the sur-face and can be Hepa-vacced.

MDF 500 for smoke works in reverse, the Peroxide finishes the oxidation process started by the fire (this is what

causes the odour) and then the detergent in part A is a very effective tool for washing away the smoke residue.

Example - Anthrax

Anthrax is a spore-forming microorganism called an endospore. An endospore 4s a dormant non-reproductive

structure produced by certain bacteria. The formation of an endospore is typically triggered by a lack of nutrients

and usually occurs in Gram positive bacteria in endospore formation when it divides within its cell wall. One side that

engulfs the other. MDF-500 destroys endospores by disrupting the cell wall or by weakening the cytoplasmic

membrane which allows MDF to enter the cell and interrupt cellular metabolism and reproduction. MDF-500 also

changes the osmotic pressure around the cell, which causes an imbalance in the internal cellular pressure resulting

in the total collapse of the cellular membrane.

Example - EBOLA

The Ebola outbreak in West Africa is of obvious concern to all Ministries of Public Health. To understand how

MDF500 destroys Ebola one must first understand the efficacy of the product and why it is the best choice for the

decontamination of the Ebola virus. Anthrax is one of the most difficult microorganism-isms to destroy because it is

a bacterial endospore (see above example) and can survive in the environment for years. When MDF-500 is applied

to Anthrax it is destroyed in minutes. Ebola is a microorganism that is not protected by a spore like Anthrax and

when MDF500 is applied to contaminated surfaces the Ebola virus is instantly destroyed along with every other

microorganism present. MDF500 is two-part application consisting of a biodegradable mixture of cationic

detergents, fatty alcohols and stabilized hydrogen peroxide and water. MDF-500 is approved for hospital use by the

United States Environmental Protection Agency (EPA). Most recently, the Dubai Government (Dubai Municipality)

approved the use of MDF-500 for the decontamination of HVAC Duct systems. MDF-500 is 1000 times less corrosive

than bleach and only caries a hazard rating of 1 on a scale of 0-4 (Common bleach carries a hazard rating of 4).

MDF-500 role in the current Ebola

Mitigation effort can be used as a pre-emptive cleaning agent for clean areas to continually assure targeted

areas remain can to provide higher safety levels against the diseases ability to spread through contaminated

surfaces. High traffic areas (Airports/Hotels/Government offices/Residences)

The second practical application is a continual mitigation and cleansing of Ebola treatment centers as

ongoing medical and aid efforts are addressing the patients.

The third is in the treatment of the deceased as they are pre-pared for internment through cremation or

burial.

Effective Against Virucidal:

Avian Influenza A, H9N2 (bird flu) Influenza A & B Influenza IVBrazil virus Aids Virus Herpes Simplex Type 1 &2 Hepatitis C &B HIV-1 Virus Human and Canine Coronavirus Norovirus

Bactericidal: Staphylococcus aureus (MRSA) and epidermidis E-coli (ESBL and 0157:1-17) Enterococcus faecalis and faecium (VRE)

Fungicidal: Aspergillus niger Penicillium variabile

Bio-Films: Listerta monocytogenes Pseudomonas aeruginosa

Where To Use MDF-500 is designed to quickly and thoroughly decontaminate large spaces. In particular, areas that experience large volumes and regular turnover of people/traffic or areas that are critical to national infrastructure and safety. Hospitals/Clinics

Quarantine rooms Surgery rooms Emergency rooms Ambulances Ventilation Systems Vet clinics

Government Jails / Prisons Command & Controls Centers Offices Schools/Day care centers

Public Transportation Taxis/Buses Trains / Subway Aircraft

Public Spaces Malls / Shopping Centers Restrooms Restaurants Hotels

Mold Remediation Kills mold, mildew, and fungal spores

Water / Flood and Sewer Damage Disinfects, deodorizers and cleans hard, non-porous surfaces Controls mold and mil-dew on hard, non-porous surfaces

Fire / Smoke & Other Odours Eliminates odours from fires, cigarettes, cigars, skunks, and odours caused by microorganisms

Trauma and Crime Scene Effective in trauma, crime-scene, tear gas and meth lab clean-up

Facilities / Building Maintenance Duct cleaning, odour mitigation, and cleaning; in apartments, high-ris-es, commercial build-ings, banks,

health care facilities, nursing homes, schools and institutions, day cares, etc Workforce Accommodations Landfills/waste disposal sites Mortuaries/Morgue/ pre-burial applications Carpet Cleaning

How is MDF-500 applied? MDF-500 can be applied as a fog (atomized mist), foam or spray. The fog application is the preferred application

method as it allows for not only horizontal surface decontamination but ALL surfaces present. In other words, the

fog application completely decontaminates every surface in a room. The exact application procedures will vary

depending on the circumstances. Our subject matter experts can consult with your team of experts to assess your

needs and provide site-specific application procedures (to include written application procedures) with hands-on

training after you take delivery of your MDF-500. EPA approved application equipment will be proposed as part of

our overall solution.

Adenosine Triphosphate

Adenosine triphosphate (ATP), the universal energy molecule found in all bacteria and mold cells. We measure ATP

levels to determine contamination levels.

Ways to Apply

Liquid spray. Pump-up sprayers or spray bottles can apply MDF-500 as a liquid spray. Spraying MDF-500 as a

liquid is beneficial when treating "hot spots" for mold or pet stains before fogging.

Foam. Foaming sprayers inject air into the product to produce a foam. As a foam, the MDF-500 product will

remain in contact with a surface longer than when applied as a liquid spray. Mist / Fog. ULV-foggers (Ultra

Low Volume), also known as wet-foggers, can apply MDF-500 as a spray mist. The mist dispenses the

product as an aerosol into an airspace and allows control over the amount of product wetting a surface.

The "Deconomics" of using MDF-500 in Commercial & Large Loss Less Product - More Coverage:

A gallon of MDF-500 (A+B) treats Z500 - 4,000 sq. ft. in a residence and over 7,500 in commercial application

depending on the structure contents.

MDF 500 is both the safest and strongest product on the market today making it possible to reduce spore

counts and neutralize odours in large spaces effectively with a limited quantity of product when compared

with others.

Faster Turnaround time:

When MDF-500 is used correctly, first time testing is the rule. Removing equipment before last fogging can

save a trip back to the site.

Because of superior efficacy, fogging with MDF 500 can reduce the need for costly equipment and man-

power required to remove the mold and mildew.

Odourless - Once dried, does not leave an odour behind.

A ULV sprayer is the most cost effective method for application.

Will remain active for 8 hours when wet:

The mixed product cannot be used after this time.

Mix solution as necessary for square footage to be treated.

Mix equal parts A and B.

Comes packaged in 4 Gallon per box:

(2) gallons of Part A and (2) gallons of Part B

Case Study

Prior to application of MDF-500, the contamination levels within the emirates airline office designated for this

controlled test reported a medium to high risk to occupants with ATP between 4800 and 9999.

Upon application of MDF-500 a clear improvement were recorded across all sections, with ATP reported between

12-79 ATP.

To provide perspective:

An ATP of 0-20 is considered ‘sterile’ and that you would expect to find in an Operating theatre of a hospital.

Frequently Asked Questions Is MDF-500 safe to use around people?

Yes, after the MDF-500 fog dries, all that remains is a microscopically thin (invisible) dry film on all horizontal

surfaces. This film is simply damp mopped or wipe from the surfaces and floors.

Is MDF-500 safe to use around electronic equipment?

Yes. All electrical devices should be un-plugged/switched off during the fogging process. Extensive testing has been

done on computers and no adverse effects have been shown from our research.

Does MDF-500 kill bedbugs and lice?

Yes, MDF-500 kills bedbugs and lice infestations

Does MDF-500 eliminate/neutralize odours?

Yes, MDF-500 eliminates most organic odours.