MCSE 03 Windows Server 2003 10 Lab
-
Upload
sivasankar015 -
Category
Documents
-
view
221 -
download
0
Transcript of MCSE 03 Windows Server 2003 10 Lab
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 1/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Managing Disks
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 2/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Disk Part Tool
Syntax:
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 3/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partition
� A physical disk is divided into separate sections called partition
� Partitioning can create up to 24 drive letters
� Disk must first be initialized and formatted before
partitioning
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 4/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partition
� Basic disks can have up to-- Four primary partition
-- Or three primary partitions and one extended
partition
� Extended partitions can be sub divided into logical
drives
� Primary partitions cannot be subdivided
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 5/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by Disk Management
Procedure:
� In Computer Management, open Disk Management
� Right-click an unallocated region of a basic disk, andclick New Partition
� In the New Partition Wizard, click next� On the select Partition type page, click primary
partition and then click next
� On the specify Partition Size page, type the size in
megabytes and click next� On the Assign Drive Letter or Path page, select the
drive letter and click next
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 6/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Procedure(contd«)
� On the Format Partition page:-- select the appropriate file system
-- type the appropriate volume lable
-- select or clear the Perform a quick format and
enable file and folder compression check boxes
� Click Next, and then click Finish.
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 7/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by Disk Management
In Computer Management, open Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 8/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by Disk Management
Right-click an unallocated region of a basic disk, and
click New Partition
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 9/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by Disk Management
In the New Partition Wizard, click next
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 10/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by Disk Management
On the select Partition type page, click primary partition
and then click next
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 11/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by Disk Management
On the specify Partition Size page, type the size in
megabytes and click next
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 12/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by Disk Management
On the Assign Drive Letter or Path page, select the
drive letter and click next
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 13/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by Disk Management
On the Format Partition page:-- select the appropriate file system-- type the appropriate volume lable
-- select or clear the Perform a quick format and enable file and folder compressioncheck boxes
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 14/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by Disk Management
Click Next, and then click Finish
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 15/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Formating a Disk
Procedure:� In Computer Management, open Disk Management
� Right-click the partition, logical drive or basic olume
that you want to format or reformat and click Format
� Select the options that you want under
-- Volume Label (name the disk)
-- File System (select either NTFS or FAT)
-- Allocation Unit Size (size of the disk to format)� If the disk is undamaged, select Perform a Qucik
Format
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 16/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Formating a Disk
In Computer Management, open Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 17/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Formating a Disk Right-click the partition, logical drive or basic olume
that you want to format or reformat and click Format
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 18/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Formating a Disk Select the options that you want under
-- Volume Label (name the disk)
-- File System (select either NTFS or FAT)
-- Allocation Unit Size (size of the disk to format)
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 19/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Formating a Disk If the disk is undamaged, select Perform a Qucik
Format
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 20/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Partition
Procedure:� In Computer Management, open Disk Management
� Right-click the partition that you want to delete, and
click Delete Partition.
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 21/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a PartitionIn Computer Management, open Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 22/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a PartitionRight-click the partition that you want to delete, and
click Delete Partition
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 23/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by DiskPartProcudure:
� At the prompt, type diskpart
� At the prompt, type list disk and then mae a note of the number of the disk on which you want to create a
primary or extended partition.
� At the DISKPART prompt type select disk n(where nis the disk number)
� At the DISKPART prompt, type
-- . Create partition primary size=number -- . Create partition extended size=number
-- . Create partition logical size=number
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 24/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by DiskPartAt the prompt, type diskpart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 25/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by DiskPartAt the prompt, type list disk and then make a note of the
number of the disk on which you want to create a primary or extended partition
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 26/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by DiskPartAt the DISKPART prompt type select disk n(where n is
the disk number)
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 27/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Partitioning a Disk by DiskPartAt the DISKPART prompt, type
-- . Create partition primary size=number
-- . Create partition extended size=number
-- . Create partition logical size=number
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 28/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Partition by DiskPart
Procedure:
� Open Command Prompt, and then type diskpart
� At the Diskpart prompt, type list disk
� At the Diskpart prompt, type select disk n(where n is
the disk which to be deleted)
� At the Diskpart prompt, type list partition
� At the Diskpart prompt, type select partion n, where n
is the partition number of the partition that you wantto delete
� At the Diskpart prompt, type delete partition.
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 29/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Partition by DiskPartOpen Command Prompt, and then type diskpart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 30/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Partition by DiskPartAt the Diskpart prompt, type list disk
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 31/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Partition by DiskPartAt the Diskpart prompt, type select disk n(where n is the
disk which to be deleted)
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 32/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Partition by DiskPart
At the Diskpart prompt, type list partition
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 33/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Partition by DiskPartAt the Diskpart prompt, type select partion n, where n is
the partition number of the partition that you want todelete
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 34/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Partition by DiskPart
At the Diskpart prompt, type delete partition
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 35/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Assign, Change or Remove a Drive Letter
Procedure using Disk Management:
� In Computer Management, open Disk Management
� Right-click a partitiom, logical drive or volume and
then click change Drive letter and Paths
� Do one of the following
-- To assign a drive letter, click Add, and then click the drive letter that you
want use
-- To modify a drive letter, click it, click Change and then click drive letter
that you want-- To remove a drive letter, click it, and then click Remove
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 36/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Assign, Change or Remove a Drive Letter
In Computer Management, open Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 37/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Assign, Change or Remove a Drive Letter
Right-click a partition, logical drive or volume and then
click change Drive letter and Paths
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 38/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Assign, Change or Remove a Drive Letter Do one of the following
-- To assign a drive letter, click Add, and then click the drive letter that you wantuse
-- To modify a drive letter, click it, click Change and then click drive letter that youwant
-- To remove a drive letter, click it, and then click Remove
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 39/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Using DiskPart
Procedure:
� Open Command prompt, and then type diskpart
� At the Diskpart prompt, type list volume.
� At the Diskpart prompt,type select volume n (where n
is the number of the volume whose drive letter is to be changed)
� At the Diskpart prompt, type one of the following:
-- assign letter=L (where L is the drive letter)
-- remove letter=L
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 40/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Using DiskPartOpen Command prompt, and then type diskpart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 41/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Using DiskPart
At the Diskpart prompt, type list volume
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 42/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Using DiskPartAt the Diskpart prompt,type select volume n (where n is
the number of the volume whose drive letter is to bechanged)
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 43/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Using DiskPartAt the Diskpart prompt, type one of the following:
-- assign letter = L (where L is the drive letter)
-- remove letter = L
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 44/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Convert File Systems
Procedure:
� In a command prompt, type convert d:/fs:ntfs (where
d: is the letter of the disk drive)
� Press Enter
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 45/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Convert File Systems
In a command prompt, type convert d:/fs:ntfs (where d:
is the letter of the disk drive)
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 46/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Convert File SystemsPress Enter
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 47/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
Managing Disk Properties
� Disk Management
-- General (Provides the model number and the
location of the disk.)
-- Volume (Provides the disk number, type, status,
partition style, capacity, unallocated space, andreserved space of the disk.
� DiskPart
-- In addition to Disk Management information,
Diskpart provides disk ID and disk type
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 48/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View Disk Properties
� View disk properties by using Disk Management
� View disk properties by using Diskpart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 49/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View disk properties by using Disk Management
Procedure:
� In Computer Management, open Disk Management
� In the graphical view or disk list, right-click a disk,and then click properties
� Click the General tab, and then record the modelnumber
� Click the Volumes tabs, and then record the values
-- Disk
--Type
-- Status
-- Partition style
-- Capacity
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 50/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View disk properties by using Disk Management
In Computer Management, open Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 51/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View disk properties by using Disk Management
In the graphical view or disk list, right-click a disk, and
then click properties
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 52/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View disk properties by using Disk Management
Click the General tab, and then record the model
number
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 53/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View disk properties by using Disk Management
Click the Volumes tabs, and then record the values
-- Disk
--Type
-- Status
-- Partition style
-- Capacity
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 54/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View disk properties by using DiskPart
Procedure
� Open command prompt
� Type the following commands at the prompt, at then
press Enter after each command
-- diskpart--select disk 0
-- detail disk
� Record the type
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 55/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View disk properties by using DiskPart
Open command prompt
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 56/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View disk properties by using DiskPart
Type the following commands at the prompt, at then
press Enter -- diskpart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 57/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View disk properties by using DiskPart
Type the following commands at the prompt, at then
press Enter -- select disk 0
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 58/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
View disk properties by using DiskPart
Type the following commands at the prompt, at then
press Enter -- detail disk
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 59/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
Rescan Disk Properties
Procedure
� In Computer Management, open Disk Management
� Click Action, and then click Rescan Disks.
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 60/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
Rescan Disk Properties
In Computer Management, open Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 61/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
Rescan Disk Properties
Click Action, and then click Rescan Disks
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 62/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
Rescan Disk Properties
Scanning the Disks
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 63/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
Managing Mounted Drives
� Is assigned a path rather than a drive letter
� Can unify different file systems on a logical drive
� Allows you to add more drivers without using up
drive letters
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 64/120
ADVANTAGE PRO ²Chennai¶s Premier Networking Training Centre
Purpose of a Mounted Drive
� Adds volume to systems without adding separate
drive letters for each new volume
-- Disk Management assigns a drive path to the drive rather than a drive
letter
-- Drive paths retain their association to the drive
-- Add or rearrange storage devices without the drive path failing
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 65/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Mounted Drive
Procedure
� In Computer Management, open Disk Management
� Right-clcik the volume that you want to mount, and
then click Change Drive Letter and Paths.
� Click Add, browse to Mount in the following empty NTFS folder
i d i
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 66/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Mounted Drive
In Computer Management, open Disk Management
C i d i
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 67/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Mounted DriveRight-click the volume that you want to mount, and
then click Change Drive Letter and Paths
C i M d D i
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 68/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Mounted DriveClick Add, browse to Mount in the following empty
NTFS folder
D l i M d D i
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 69/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Mounted Drive
Procedure:
� In Computer Management, open Disk Management
� Right-click the volume that you want to delete, and
then click Change Drive Letter amd Paths
� To delete a volume, click it, and then click Remove
D l i M d D i
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 70/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Mounted DriveIn Computer Management, open Disk Management
D l i M d D i
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 71/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Mounted DriveRight-click the volume that you want to delete, and then
click Change Drive Letter amd Paths
D l ti M t d D i
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 72/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Deleting a Mounted DriveTo delete a volume, click it, and then click Remove
C i M d D i b Di k
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 73/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Mounted Drive by Diskpart
Procedure
� Open command prompt
� From the NTFS drive or folder that you want tomount elsewhere, type diskpart
� At the diskpart prompt, type list volume and thenmake note of the number of the volume
� At the diskpart prompt, type select volume n (where nis the number of the volume you want to mount)
� At the diskpart prompt, type assign mount=\path(where path is the mount drive path tht you want toassign to the volume)
C ti M t d D i b Di k t
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 74/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Mounted Drive by Diskpart
Open command prompt
C ti M t d D i b Di k t
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 75/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Mounted Drive by Diskpart
From the NTFS drive or folder that you want to mount
elsewhere, type diskpart
C ti M t d D i b Di k t
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 76/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Mounted Drive by Diskpart
At the diskpart prompt, type list volume and then make
note of the number of the volume
C ti M t d D i b Di k t
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 77/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Mounted Drive by Diskpart
At the diskpart prompt, type select volume n (where n is
the number of the volume you want to mount)
C ti M t d D i b Di k t
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 78/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Mounted Drive by Diskpart
At the diskpart prompt, type assign mount=\path (where
path is the mount drive path tht you want to assign tothe volume)
D i Di k C i
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 79/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Dynamic Disk Conversion
� Existing partitions on the basic disk become
volumes
� Dynamic disks can be reverted back to basic
disks
-- Disk structure and data is not maintained
-- Back up data before reverting
Con erting Basic Disk to D namic
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 80/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Converting Basic Disk to Dynamic
Procedure
� In Computer Management, open Disk Management
� Right-click the basic disk that you want to convert,
click Convert to Dynamic Disk, and then follow he
instructons
Converting Basic Disk to Dynamic
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 81/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Converting Basic Disk to DynamicIn Computer Management, open Disk Management
Converting Basic Disk to Dynamic
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 82/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Converting Basic Disk to Dynamic
Right-click the basic disk that you want to convert, click
Convert to Dynamic Disk, and then follow heinstructons
Converting Basic Disk to Dynamic
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 83/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Converting Basic Disk to DynamicClick Ok to confirm
Converting Basic Disk to Dynamic
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 84/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Converting Basic Disk to DynamicBasic Disk is converted into Dynamic Disk
Reverting a Dynamic to Basic Disk
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 85/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Reverting a Dynamic to Basic Disk
Procedure
� Back up all volumes on the disk that yo want toconvert from dynamic to basic
� In Computer Management, open Disk Management
� Right-click each volume on the dynamic disk that you
want to revert to a basic disk, and then click DeleteVolume for each volume on the disk.
� When all volumes on the disk have been deleted,right-click the disk, and then click Convert to Basic
Disk � Recreate your partitions, and then restore your data to
basic disk.
Reverting a Dynamic to Basic Disk
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 86/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Reverting a Dynamic to Basic Disk In Computer Management, open Disk Management
Reverting a Dynamic to Basic Disk
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 87/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Reverting a Dynamic to Basic Disk Right-click each volume on the dynamic disk that you
want to revert to a basic disk, and then click DeleteVolume for each volume on the disk
Reverting a Dynamic to Basic Disk
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 88/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Reverting a Dynamic to Basic Disk When all volumes on the disk have been deleted, right-
click the disk, and then click Convert to Basic Disk
Reverting a Dynamic to Basic Disk
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 89/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Reverting a Dynamic to Basic Disk Recreate your partitions, and then restore your data to
basic disk.
Converting a Basic Disk using DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 90/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Converting a Basic Disk using DiskPart
Procedure
� Open Command prompt and then type diskpart
� At the Diskpart, prompt, type list disk
� At the Diskpart prompt, type select disk and then
enter the number of the disk � At the Diskpart prompt, type convert dynamic
Converting a Basic Disk using DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 91/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Converting a Basic Disk using DiskPart
Open Command prompt and then type diskpart
Converting a Basic Disk using DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 92/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Converting a Basic Disk using DiskPart
At the Diskpart, prompt, type list disk
Converting a Basic Disk using DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 93/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Converting a Basic Disk using DiskPart
At the Diskpart prompt, type select disk and then enter
the number of the disk
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 94/120
Create a Simple Volume
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 95/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Create a Simple Volume
There are two methods:
� Create an a Simple Volume by using Disk
Management
� Create a Simple Volume by using Disk Part
Creating Simple Volume using Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 96/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating Simple Volume using Disk Management
Procedure
� In Computer Management, open Disk Management
� Right-click the unallocated space on the dynamic disk
on which you want to create the simple volume, and
then click New Volume� In he New Volume Wizard, click Simple, and then
follow the instructions
Creating Simple Volume using Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 97/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating Simple Volume using Disk Management
In Computer Management, open Disk Management
Creating Simple Volume using Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 98/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating Simple Volume using Disk Management
Right-click the unallocated space on the dynamic disk
on which you want to create the simple volume, andthen click New Volume
Creating Simple Volume using Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 99/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating Simple Volume using Disk Management
In he New Volume Wizard, click Simple, and then
follow the instructions
Creating Simple Volume using DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 100/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating Simple Volume using DiskPart
Procedure
� Open Command Prompt, and then type diskpart
� At the diskpart prompt, type list disk
� At the diskpart prompt, type create volume simple
size=n disk=n (where size=n is the size of the disk inmegabytes, and disk=n is the number of the disk).
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 101/120
Creating Simple Volume using DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 102/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating Simple Volume using DiskPart
At the diskpart prompt, type list disk
Creating Simple Volume using DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 103/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
C eat g S p e Vo u e us g s a t
At the diskpart prompt, type create volume simple
size=n disk=n (where size=n is the size of the disk inmegabytes, and disk=n is the number of the disk
Creating a Spanned Volume
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 104/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Creating a Spanned Volume
Creating an Extended or Spanned Volume using Disk
Management
� In Computer Management, open Disk Management
� Right-click the simple or spanned volume you want
to extend, click Extend Volume, and then follow theinstructions
Creating an Extended or Spanned Volume using
Di k M t
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 105/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Disk Management
In Computer Management, open Disk Management
Creating an Extended or Spanned Volume using
Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 106/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Disk Management
Right-click the simple or spanned volume you want to
extend, click Extend Volume, and then follow theinstructions
Creating a Spanned Volume
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 107/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
C eat g a Spa ed Vo u e
Creating an Extended or Spanned Volume using
DiskPart
� Open Command Prompt, and then type diskpart
� At the diskpart prompt, type list volume
� At the diskpart prompt, type select volume n )where nis the basic volume that you want to extend into
contiguous, empty space on the same disk)
� At the diskpart prompt, type extend size=o (where o
is the size of he extended partition in megabytes).
Creating an Extended or Spanned Volume using
DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 108/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
DiskPart
Open Command Prompt, and then type diskpart
Creating an Extended or Spanned Volume using
DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 109/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
DiskPart
At the diskpart prompt, type list volume
Creating an Extended or Spanned Volume using
DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 110/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
DiskPart
At the diskpart prompt, type select volume n )where n is
the basic volume that you want to extend intocontiguous, empty space on the same disk)
Creating an Extended or Spanned Volume using
DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 111/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
DiskPart
At the diskpart prompt, type extend size=o (where o is
the size of he extended partition in megabytes).
Creating Striped Volumes
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 112/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
g p
Procedure for creating a striped volume using Disk
Management
� In Computer Management, open Disk management
� Right-click the unallocated space on the dynamic disk
on which you want to create the striped volume andthen click New Volume.
� In the New Volume Wizard, select Striped, and then
follow the instructions
Procedure for creating a striped volume using
Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 113/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Disk Management
In Computer Management, open Disk management
Procedure for creating a striped volume using
Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 114/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Disk Management
Right-click the unallocated space on the dynamic disk
on which you want to create the striped volume andthen click New Volume
Procedure for creating a striped volume using
Disk Management
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 115/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
Disk Management
In the New Volume Wizard, select Striped, and then
follow the instructions
Creating Striped Volumes
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 116/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
g p
Procedure for creating a striped volume using DiskPart
� Open Command Prompt, and then type diskpart
� At the diskpart prompt, type list disk
� At the diskpart prompt, type create volume stripe
size=n disk=n (where size=n is the size of the disk inmegabytes, and disk=n are the numbers of the disks
you are striping).
Procedure for creating a striped volume using
DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 117/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
DiskPart
Open Command Prompt, and then type diskpart
Procedure for creating a striped volume using
DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 118/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
DiskPart
At the diskpart prompt, type list disk
Procedure for creating a striped volume using
DiskPart
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 119/120
ADVANTAGE PRO ² Chennai¶s Premier Networking Training Centre
DiskPart
At the diskpart prompt, type create volume stripe size=n
disk=n (where size=n is the size of the disk inmegabytes, and disk=n are the numbers of the disksyou are striping).
8/6/2019 MCSE 03 Windows Server 2003 10 Lab
http://slidepdf.com/reader/full/mcse-03-windows-server-2003-10-lab 120/120
Thank u.