MCB-2 · 2014-03-17 · STRAPPING SYSTEMS ® Fully Automatic Corrugated Bundle Squaring and...
Transcript of MCB-2 · 2014-03-17 · STRAPPING SYSTEMS ® Fully Automatic Corrugated Bundle Squaring and...
MOSCA – Corrugated Strapping SystemsMOSCA – Corrugated Strapping Systems
S T R A P P I N G S Y S T E M S
®
MASCHINENFABRIK Gartenstraße 1GERD MOSCA AG D-69429 Waldbrunn/Strümpfelbrunn
Tel.: + 49 (0)62 74 / 9 32-0Fax: + 49 (0)62 74 / 9 32-2 40Tel. Service: + 49 (0)62 74 / 9 32-110Internet: http://www.mosca-ag.comE-Mail: [email protected]
KPA 131-26Fully-Automatic Pallet Packing Press to secure Pallet Loads� 3 strap guides with 3 strap guiding lances� 2 sealing heads (1 sealing head laterally movable)� Automatic top and bottom edge protection� Actuated roller conveyor / turntable / lifting turn cross
Capacity:up to 140 pallets/h,2 vertical strappingsPassage widths:1,800 - 3,200 mm
Polyester Strap / Polypropylene Strap� Polyester strap: Widths from 9 mm up to 15 mm� Polypropylene strap: Widths from 4 mm up to 15 mm
RO-TRC-3Fully-Automatic Strapping Machine � Infinitely adjustable conveying speed� PLC control Siemens type S7� Pneumatic double press� Fully-automatic strap threading system� Selector switch for single
or double strapping� Wear-free DC drive,
brushless motor technologyFrame sizes:
900 x 550 mm 1250 x 550 mm 1650 x 550 mm
2000 x 550 mm
RO-ATRSFully-Automatic Strapping Machine � Infinitely adjustable conveying speed� PLC control Siemens type S7� Pneumatic press including maintenance unit� Fully-automatic strap threading system� Exact package squaring
to all sides� Wear-free DC drive,
brushless motor technologyPassage widths:900 mm / 1300 mm /1650 mm / 1950 mm /2200 mm
RO-ATRS-KFor Strapping of 4- and 6-Corner Boxes as well as Crash-Lock Bottom Boxes� Infinitely adjustable conveying speed� PLC control Siemens type S7/OP� Pneumatic press, side pusher, package back stops� Fully-automatic strap
threading system� Pressure roller track� Wear-free DC drive,
brushless motor technologyPassage widths:750 mm / 900 mm /1300 mm / 1650 mm
UATRIFully-Automatic In-Line Strapping Machinewith Aligning Device� Infinitely adjustable conveying speed� PLC control Siemens type S7 with TP� Pneumatic, height adjustable pressure roller bar� Fully-automatic strap threading system� Exact package squaring to all sides� All strappings are
applied in-line
Passage widths:1300 mm /1600 mm /2000 mm
12/ 06 Subject to alterations
Mosca – the World of Strapping
®
S T R A P P I N G S Y S T E M S
Fully automatic In-line-Strapping Machine
MCB-2Strapping Machine
Option:powered exit table
S T R A P P I N G S Y S T E M S
®
Fully Automatic Corrugated Bundle Squaring and Strapping System
MCB-2Fully Automatic Corrugated Bundle Squaring and Strapping System
The new Mosca MCB-2 strapping system is the latestgeneration of corrugated bundle strappers with inte-grated squaring device. The fully automatic in-linestrapping machine features fast, automated setup andjob changes, giving extremely high process reliability.The smooth bundle control is achieved by using thelatest in brushless DC technology for the ultimate instrap sealer reliability and low maintenance. Through-put capability is up to 27 bundles per minute whilst atthe same time a smooth bundle transport is guaranteed.
System FeaturesSiemens S7 PLC control with "Proface” touch paneloperator interface
Integrated squaring and strapping functions
Automated setup system resets to the dimensions ofthe first bundle of the new size, at the push of a but-ton or signal from the upstream equipment.
Control of five sides of the bundle provides perfectlysquared, uniform bundles
Electrically driven, variable frequency controlled squa-ring and top/bottom conveyors provide smoothbundle transport.
Capability to strap up to 90 mm outside the bundlecentre (in 30 mm steps) allows for perfect strappingof complex bundles sizes and forms.
Electromechanical press
Strapping in the direction of bundle travel, typicallyin-line with flutes
Strapping TechnologyA pusher drives the bundle through pre-draped strap,placing strap on three sides. Swing arm pulls strappast the fourth side, completing the loop and activa-ting the heat seal.
Electromechanical strap tension
Sealing head, swing arm, side pusher and off-centrealignment in brushless DC technology.
Thermocouple controlled heat sealing system
Fully Automatic Corrugated Bundle Squaring and Strapping System
MCB-2Fully Automatic Corrugated Bundle Squaring and Strapping System
OptionsPowered exit table: six powered belts provide perfectbundle transport and increased productivity.Powered adjustment of machine centreline: this allowsthe MCB-2 to be perfectly integrated into your convey-ing systems – also when strapping off the centre line isa common requirement.Trouble light and low strap indicatorUpstream pacer conveyor: an in-liner that is perfectlyadjusted to the MCB-2 guarantees maximum efficiencyfor your job changing.Special colorConveyor height > 1040 mm
Technical DataCapacity:
up to 27 bundles per minute.
Strapping:Machine grade 5,6, 8 or 9 mm Polypropylene strap
Coil Dimension:Core diameter: 200 mmCoil width: 1 90 mm
Electrical Power:Voltage: 400 V (415, 440),
50/60 Hz, 3 PH16 A CEE-plug
Consumption: approx. 4 kVA
Conveyor height: 800 – 1040 mm
Color:Frame: RAL 5010 gentian bluePanels and guards: RAL 7035 grey
Weight: 1500 kg (nominal width 1300 mm)
Sizes:Nominal width 1300 mm 1600 mm
Length min. 170 mm 170 mmLength max. 1300 mm 1300 mmWidth min. 170 mm 170 mmWidth max. 1300 mm 1600 mmHeight min. 40 mm 40 mmHeight max. 350 mm 350 mm
Length > 1300 mm only possible with one pusher
Option:required for off-centre bundling
Option:powered exit table
product flow
Technical drawing MCB-2 nominal width 1300 mm
Optional
Option:Safety Fences
Option:Safety Fences
Strap CoilOperator Panel
Operator Panel