4” SLIP-ON MUFFLERS•4” diameter slip-on mufflers feature 16-gauge steel construction and removable flow-through baffles with show-chrome or black finish

•Mufflers feature black billet end caps and contrasting flutes

•Bolt to stock locations with supplied hardware

•Sold in pairs•Made in the U.S.A.

May 2011

PART # DESCRIPTION SUG. RETAILFOR 91-11 FXD, FXDWG W/ MID OR FORWaRD CONTROL1800-1302 Chrome w/ black billet end cap and

chrome heat shields $679.95

PART # DESCRIPTION SUG. RETAILFOR 91-11 FXD, FXDWG W/ MID OR FORWaRD CONTROL (CONT)1800-1303 Black ceramic w/ black billet end cap

and black ceramic heat shields $699.95

ROaD RaGE II B1 POWER SySTEMS•Designed specifically to address the needs of tuned motors built for high horsepower applications•Uses a unique extended inner collector maximizing performance•Features 2-into-1 equal-length 13/4”-17/8” stepped headpipes•Straight-style performance muffler body with 21/2” x 161/2” baffle and billet end cap with contrasting machined flutes•Include full-coverage heat shields•Oxygen sensor port plugs also included for non-sensor applications

1800-1302

PART # DESCRIPTION SUG. RETAILFOR 95-11 FLT, FLHT, FLHX, FLTR, FLHR MODELS1801-0514 Megaphone, chrome w/ 21/4”

standard baffles $549.951801-0515 Megaphone, chrome w/ 21/2”

performance baffles 549.95

PART # DESCRIPTION SUG. RETAILFOR 09-11 VRSCF MODELS1801-0516 Straight cut, black $579.951801-0517 Straight cut, chrome 550.95

PART # DESCRIPTION SUG. RETAIL1801-0499 For 07-11 FXST, FXSTB, FXSTC, FLSTC,

08-11 FXCW, FXCWC $359.95

3” FIREPOWER SERIES SLIP-ON MUFFLERS•Straight-cut slip-on mufflers feature 16-gauge steel construction with polished chrome finish and grooved black billet end caps

•Improves power and performance •2” baffles•Sold in pairs•Made in the U.S.A.

1800-1303

1801-0514

1801-0516

1801-0517

STOUT SLIP-ON MUFFLERS•Massive 4” non-tunable chrome bodies•Streamlined, internal tapered, billet aluminum end caps with recessed fasteners are preinstalled

•Newly-designed inlets flow better into OEM headpipe as well as SuperTrapp True Dual Headpipes

•Provide a bold, strong power curve from mid-range on up with a significant horsepower and torque gain over stock mufflers

•Classic deeep and heavy Kerker rumble is 5dB over stock

•Sold in pairs•Made in the U.S.A.

SUPERTRaPP aND KERKERHere are a pair of big names in the exhaust business that used to be the fiercest of competitors, a fact that drove both to innovate and improve to stay ahead of the other. Today, now teamed together, these brands continue to invent exhausts with dyno-developed performance, unique styling features and of course their highly recognizable names that riders know and trust.

2

PART # DESCRIPTION SUG. RETAIL1801-0518 For 10-11 FLHT/FLHR/FLHX/FLTR

(except 10 FLHX/FLTRX) $678.95

PART # DESCRIPTION SUG. RETAIL1801-0519 For 95-09 FLT/FLHT/FLHR/FLHX/FLTR $678.95

STOUT SLIP-ON MUFFLERS•Massive 4” non-tunable chrome body•Streamlined, internal tapered, billet aluminum end caps with recessed fasteners are preinstalled•Newly-designed inlets flow better into OEM headpipe as well as SuperTrapp True Dual Headpipes•Provide a heavy, broad spread power curve with modest horsepower and torque gains over stock mufflers •Minimally (2dB) louder than stock•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1801-0521 For 10-11 FLHT/FLHR/FLHX/FLTR

(except 10 FLHX/FLTRX) $648.95

PART # DESCRIPTION SUG. RETAIL1801-0520 For 95-09 FLT/FLHT/FLHR/FLHX/FLTR $648.95

1801-0519

1801-0521

3

TODD’S CyCLETodd Silicato, the man behind Todd’s Cycle, has worn many hats over the years including chief mechanic for a GP race team and numerous R&D positions in powersports. With innovative new products that look as good as they perform, your customers are now seeing Todd’s in all the big magazines and TV shows that know Todd’s Cycle draws attention. Make sure your shop is getting the attention it deserves with plenty of Todd’s on hand.

PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAIL0601-1542 Drag, chrome 0” 31” 9” 6” $199.950601-1543 Drag, black 0” 31” 9” 6” 199.950601-1544 Drag, flat black 0” 31” 9” 6” 199.95

SUPER 8 HaNDLEBaRS•High-quality, thick-walled steel•Drilled for internal wiring, and dimpled for clearance•11/8” bars taper to 1” for use with stock OEM hand controls•The only bar that features true 11/8” diameter in the clamping area•Requires the use of 11/8” risers (sold separately); see 2011 FatBook, page 756•Made in the U.S.A.

NOTE: Not for electronic throttle applications.

PART # DESCRIPTION SUG. RETAIL2001-0506 Chrome $59.952001-0507 Gloss black

powder-coat 59.95

RECESSED HEaDLIGHT MOUNT•Great for tucking headlights in for that custom look

•CNC-machined from Billet aluminum•.75” wide to fit most lights•1.5” high with .5” offset•Available in Chrome or gloss black powder-coat•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-11 BIG TWIN1602-0406 Chrome $26.95

PART # DESCRIPTION SUG. RETAILFOR 84-11 BIG TWIN (CONT)1602-0407 Gloss black powder-coat $26.95

SHIFTER SPLINE COVERS•Fit over the end of the shifter shaft when removing heel shifter•CNC-machined billet aluminum•Available in chrome or gloss black powder-coat•Made in the U.S.A.

0601-1542

0601-1543

2001-05062001-0507

1602-0406 1602-0407

FLaRE™ BILLBOaRD WINDSHIELDS•Modeled after the original Flare™ windshield for Baggers, now almost every rider can get all of the same performance and style with bolt-on ease

•With patented Klock Werks “hips” on the side and a flip at the top, shields have been wind tunnel designed and tested to produce the same amount of additional down force as original

•Real world testing and computer simulation also produced one height that will work for most riders; heights listed are measured from headlight opening to top of shield; all feature a 25” overall width

•All are predrilled for easy mounting using stock windshield mounting hardware•Made in the U.S.A.

4

KLOCK WERKSWe told you that Brian Klock and his “Krew” were not finished creating new Flare™ windshield styles for almost every ride and here is more evidence of that. The latest offerings include all of the same great features, design and testing that went into the Original Flare™, now in designs for an ever expanding range of motorcycles. Be sure to have all the Flare™ windshields available when your customers come asking for them.

PART # DESCRIPTION SUG. RETAILFOR 88-11 FXR, XL, 91-05 FXD WITH OEM aCCESSORy DETaCHaBLE COMPaCT WINDSHIELD (17.5” TaLL)2310-0343 Tint $229.952310-0344 Clear 229.95

PART # DESCRIPTION SUG. RETAILFOR 05-11 FLSTN, 86-11 FLSTC, 00-11 FLSTF/FLSTFB, WITH OEM aCCESSORy DETaCHaBLE KING SIZE NOSTaLGIC WINDSHIELD (19.5” TaLL)2310-0345 Tint $229.952310-0346 Clear 229.95

PART # DESCRIPTION SUG. RETAILFOR 93-05 FXDWG, 86-10 FXST/FXSTC/FXSTB, 85-86 FXWG WITH OEM aCCESSORy DETaCHaBLE COMPaCT WINDSHIELD (19.5” TaLL)2310-0347 Tint $229.952310-0348 Clear 229.95

PART # DESCRIPTION SUG. RETAILFOR 93-06 BIG TWIN W/ CV CaRB & 01-11 TWIN CaM W/ DELPHI EFI (EXCEPT 08-11 TOURING)1010-0984 Contrast Cut $499.951010-0985 Chrome 499.95FOR 93-06 BIG TWIN MODELS W/ S&S E OR G CaRB1010-0990 Contrast Cut 499.951010-0991 Chrome 499.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 TOURING aND H-D FL TRIKE1010-0986 Contrast Cut $499.951010-0987 Chrome 499.95FOR 91-11 XL1010-0988 Contrast Cut 499.951010-0989 Chrome 499.95

FaST aIR INTaKE SOLUTION•The most innovative and aggressive-looking forward-facing air intake on the market

•Features an internal crank case breather system •K&N Filter element allows for a significant horsepower increase over stock air cleaner•Available in chrome or Contrast Cut™ finishes •Includes rain sock •Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-11 MODELS (EXCEPT 08-11 DRESSERS, H-D FL TRIKE)0630-0951 Black $99.950630-0952 Chrome 99.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT/FLHR/FLHX/FLTR, H-D FL TRIKE MODELS0630-0953 Black $139.950630-0954 Chrome 139.95

ELITE GRIPS•Durable, knurled rubber sleeves with an embossed PM logo wrapped around machined billet grips

•Optimal comfort and style •Available in black anodized and chrome•Sold in pairs•Made in the U.S.A.

1010-0985

0630-09510630-0952

1010-0984

2310-0344 2310-0345 2310-0348

EXTENDED SaDDLEBaGS•Replace stock H-D bags, with a custom stretched look

•Made of heavy-duty ABS plastic•Feature exhaust cutouts on each side; single exhaust bikes need exhaust filler plug for side without exhaust (sold separately)

•Pre-drilled and ready for paint; no bodywork needed

•Accept stock H-D lids and components (not included)

•Saddlebags sold in pairs; filler plugs sold each

•Made in the U.S.A.

5

PART # DESCRIPTION SUG. RETAILFOR 93-11 FLHT/FLHX/FLHR/FLTR MODELS W/ OEM BaGS3501-0690 Extended saddlebags $1,199.953501-0691 Exhaust filler plug, left-side 44.95

PART # DESCRIPTION SUG. RETAILFOR 93-11 FLHT/FLHX/FLHR/FLTR MODELS W/ OEM BaGS (CONT)3501-0692 Exhaust filler plug, right-side $44.95

PART # DESCRIPTION SUG. RETAIL4402-0179 GPS case $24.95

PART # DESCRIPTION SUG. RETAIL4402-0180 Smart Phone case $24.95

WaTER-RESISTaNT aCCESSORy CaSES•Constructed of molded Neoprene•Watertight wire port is integrated into the bottom of each case to allow power and data cords to be routed to the motorcycle

•Watertight zipper for easy access to unit•Quick-detach dual T adapter on the back for easy case removal when case is not needed•Touch screen front panel allows all touch features to work while inside the case•Both cases include padded inserts to allow for thickness variations of the devices•PART #4402-0179 can mount almost all flat-mount GPS units to any TechMount easily and securely•PART #4402-0179 inside dimensions are 3.4” H x 5.3” W x 1.7” D; outside dimensions are 4.2” H x 5.8” W x 2” D

•PART #4402-0180 can mount almost all “Smart Phone” units to any TechMount easily and securely•PART #4402-0180 inside dimensions are 4.7” H x 3” W x 1” D; outside dimensions are 5.4” H x 3.7” W x 1.4” D

PART # DESCRIPTION SUG. RETAIL4402-0181 DynoJet LCD adapter pin $4.95

DyNOJET aDaPTER PIN•CNC-machined from 6061 T-6 aluminum then anodized black for a weather-resistant finish•The adapter replaces the top pin on any TechMount mounting system•Allows the DynoJet LCD unit to mount directly onto any TechMount on any motorcycle easily and securely; simply attach the pre-drilled adapter to the back of the LCD unit (mounting hardware included)

•Made in the U.S.A.

4402-0179

3501-0690

3501-0691

3501-0692

6

PART # DESCRIPTION SUG. RETAILFOR 04-11 XL (271/4” OVERaLL L X 141/2” W FRONT X 121/2” W REaR)0804-0411 Mild stitch $529.950804-0412 Flame stitch 539.95

PART # DESCRIPTION SUG. RETAILOPTIONaL BaCKRESTS0822-0133 EZ GLIDE II backrest, solar-reflective leather,

smooth (9” W x 51/4” H) $179.950822-0154 EZ GLIDE III backrest, solar-reflective leather,

smooth w/ pouch (10” W x 71/2” H) 199.95

LOW-PROFILE TOURING SEaT WITH DUaL BaCKREST CaPaBILITy•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•Low-profile design with molded flexible urethane foam interior for improved seating position and maximum comfort

•3/16” ABS thermoformed seat base for a perfect fit, and fully carpeted bottom with rubber bumpers to protect paint

•Feature backrest capability for both driver and passenger•Accept EZ Glide™ II or III backrest (sold separately); same backrest can be used in either position

•Made in the U.S.A.

SOLAR

REFLECTIVE

PART # DESCRIPTION SUG. RETAILFOR 97-07 FLHR, 06-07 FLHX MODELS (EXCEPT FLHRS/SE) (233/4” L OVERaLL X 12” W X 11/2” H)0801-0588 Smooth $239.950801-0589 Flame stitch 249.95

PART # DESCRIPTION SUG. RETAILFOR 97-07 FLHR, 06-07 FLHX MODELS (EXCEPT FLHRS/SE) (233/4” L OVERaLL X 12” W X 11/2” H) (CONT)0801-0590 Black pinstripe $249.95

LOW-PROFILE SOLO SEaTS•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•Flexible urethane foam for maximum comfort•3/16” ABS thermoformed seat base with carpeted bottom to protect paint•New EZ Mount system requires no tools for taking seat on and off•Seat geometry places rider further back and up to 11/2” lower (depending on model) than stock seat•Lower position creates better rider position with improved styling•Seat covers the two seat fender studs for a low, clean look•Includes mounting hardware•Made in the U.S.A.

NOTE: 97-07 FLHR/FLHX seats will also fit 97-07 FLT/FLHT/FLTR models when used with lower dash extension PART #2202-0070.

0801-0588 0801-0589 0801-0590

EZ GLIDE III0822-0154

EZ GLIDE II0822-0133

0822-0154Back view

0804-0411with optional backrest0822-0133 0804-0412

0804-0412with optional backrest 0822-0154

EZ Mount System

7

PART # DESCRIPTION SUG. RETAIL0822-0156 For all Drag Specialties seats that accept

EZ Glide I backrest $229.95

PART # DESCRIPTION SUG. RETAIL0822-0157 For all Drag Specialties seats that accept

EZ Glide II backrest $229.95

“THE CONVERTIBLE” BaCKREST aSSEMBLy WITH BUILT-IN SEaT RaIN COVER•Complete backrest assembly that has a seat rain cover that pulls out of the pouch on the backside of the pad and covers the entire seat

•Rain cover is secured in the pouch by two snaps and can be removed for cleaning or to use the oversized pouch for additional storage

•Rain-resistant black cover is 300 x 300 denier polyester fabric with a urethane coating and WRMR (water-resistant, mildew-resistant) finish

•Easy use: simpy lay backrest forward, unzip pouch, remove rain cover and pull around the perimeter of the seat to secure

•Pad features solar-reflective leather on contact area; pouch and pad sides are high-quality automotive-grade vinyl

•Backrest assembly can be used in driver or passenger position•All exposed hardware is polished with a show-chrome finish; internal base is 14 gauge steel

•Pad measures 10” W x 71/2” tall and adjusts for 2” fore/aft and 2” vertical in three positions

SOLAR

REFLECTIVE

PART # DESCRIPTION SUG. RETAIL0821-1174 For all Drag Specialties Solo front seats w/ or

w/o backrest $24.950821-1175 For all Drag Specialties Predator and Spoon style

seats (except 2-up models) 24.95

PART # DESCRIPTION SUG. RETAIL0821-1176 For all Drag Specialties 2-up Predator and Solo

front seats w/ Solo rear seat combination w/ or w/o backreast $27.95

0821-1177 For all Drag Specialties Low Profile Touring and Double Bucket seats w/ or w/o backrest 27.95

SEaT RaIN COVERS•Made of durable black 300 x 300 denier polyester fabric with a urethane coating and WRMR (Water-Resistant/Mildew-Resistant) finish

•Cover folds into its own pouch, and pouch is sewn into the rain cover so it is easy to locate

•Features one loop on each side and comes with 4’ of nylon and two barrel locks as adjusters for additional security if needed

•Made in the USA

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLT/FLHT, 86-11 FLST aND H-D FL TRIKE0411-0012 +2” (8.5”) $46.95

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLT/FLHT, 86-11 FLST aND H-D FL TRIKE (CONT)0411-0013 +4” (10.5”) $52.95

CHROME FORK SLIDER COVERS•Chrome-plated steel construction•Available in +2” and +4” longer versions•Sold as a set

NOTE: Always check slider covers for proper clearance.

NOTE: Bottom area of slider covers may need to be formed slightly to clear lower legs and fender.

0411-0012

0821-1177

0822-0157

Remove from pouch

Pull around parimeter of seat to secure

Thread the barrel lock end through the cord loop

attach tie-downs to foot-pegs

SaDDLEBaG GUaRD ELIMINaTOR BRaCKET•Used for the ultimate custom look•Goes from the frame to the lower saddlebag support brackets and replaces the saddlebag guards

•Allows the removal of the upper saddlebag rails•Available in chrome or black•Sold in pairs

8

PART # DESCRIPTION SUG. RETAIL0350-0115 150/80-16 (SMV) $16.950350-0116 150/80-16 (CMV) 16.95

HEaVy-DUTy INNER TUBES•High-quality, heavy-duty rubber inner tubes

•Sold each

PART # DESCRIPTION SUG. RETAIL0630-0946 For 08-11 FLHT/FLHR/FLTR./FLHX

and H-D Trikes $99.950630-0947 For 84-11 models (except 08-11 Dressers,

H-D FL Trikes and those with air-reservoir handlebars) 99.95

HIGH ROLLER GRIPS•Billet aluminum construction with a chrome finish

•Feature knurled rubber sleeves for all day comfort

•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 97-08 FLHT3501-0613 Chrome $39.953501-0614 Black 39.95

PART # DESCRIPTION SUG. RETAIL1132-0590 For L84-89 Big Twin; repl. OEM #37902-82A $39.95

CLUTCH aDJUSTER PLaTE•CNC machined from billet aluminum

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1107-0199 For 02-11 FXST/FLST $44.95

TRaNSMISSION BLOCK COVER•Dresses up the aluminum block on top of Twin Cam “B” transmissions that is exposed when the seat post/coil mount is removed

•CNC machined from billet aluminum•Show chrome finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0510-0196 Weld-on kickstand mount $64.95

WELD-ON KICKSTaND MOUNT•CNC-machined from forged steel•Raw finish for ease of welding•For use on 11/8” diameter frame tubes•Accepts 52-84 XL kickstand

PART # DESCRIPTION SUG. RETAIL0712-0314 For 09-11 FLHT, FLHX, FLHR, FLTR models $29.95

TRaNSMISSION OIL DRaIN TOOL•Directs the transmission fluid from the bottom of the case to the drain pan instead of on the frame

•Helical design locks into place to ensure it stays put•Drain plug can be removed through an opening in the center of the tool

•CNC machined from billet aluminum•Made in the U.S.A.

3501-0614

0630-0946

3501-0613

CaRL BROUHaRD DESIGNSThis month we are proud to feature some of the latest masterful creations from our friend Carl Brouhard. Here you will find parts and accessories that incorporate timeless style and classic design into pieces that riders will appreciate for the life of their ride, as opposed to “fads” that are here today and gone tomorrow. Make sure you present Carl Brouhard Designs to your riders who expect the best.

9

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLHT, H-D FL TRIKE, 86-11 FLST1602-0408 Chrome $319.951602-0409 Black 319.95

HEEL-TOE SHIFTER LEVERS•Constructed of 6061 T6 billet aluminum•Heel shifter is extended 11/2” to accommodate large aftermarket floorboards and riders with large feet

•Available with chrome or black-anodized finish•Easy to install•Matches CBD brake levers•Made in the U.S.A.

NOTE: Shifter pegs not included; matching pegs available separately. PART # DESCRIPTION SUG. RETAILFOR 84-11 FLT, FLHT, FLHR, FLTR, H-D FL TRIKE, 86-11 FLST, FXST, 93-11 FXD (W/ FORWaRD CONTROLS)1602-0410 Chrome $165.951602-0411 Black 165.95

SINGLE SHIFTER LEVERS•Constructed of 6061 T6 billet aluminum•Ideal for eliminating the heel shifter, freeing up room on floorboards•Available with chrome or black-anodized finish•Easy to install•Matches CBD brake arms•Made in the U.S.A.

NOTE: Shifter pegs not included; matching pegs available separately.

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLT aND H-D FL TRIKE MODELS1601-0276 Black $107.951601-0277 Chrome 107.95

SHIFTER ROD LEVERS•Constructed of 6061 T6 billet aluminum•Replaces stock shifter rod lever•Easy installation•Matches CBD brake and shift arms•Available with a chrome or black-anodized finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR aLL H-D MODELS W/ 5/16-24 THREaDED PEGS1603-0134 Black $71.951603-0135 Chrome 71.95

SHIFTER PEGS•Shifter pegs with chrome or black-anodized finish•Complement CBD shift levers, brake arms and floorboards•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 00-11 FLST1610-0200 Black $319.951610-0201 Chrome 319.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLTR, H-D FL TRIKE1610-0204 Black $319.951610-0205 Chrome 319.95

PART # DESCRIPTION SUG. RETAILFOR 97-07 FLT, FLHT, FLHR, FLTR1610-0202 Black $319.951610-0203 Chrome 319.95

BRaKE aRMS•Constructed of 6061 T6 billet aluminum•Offers a more comfortable foot position•Available with chrome or black-anodized finish•Matches CBD floor boards•Easy to install•Made in the U.S.A.

NOTE: Pegs not included; matching pegs available separately.

1602-0408

1602-0409

1602-0410

1602-0411

1601-0276

1601-02771603-0134

1603-0135

1610-0200

1610-0201

EVO FINNED ROCKER COVERS•Original Randy Smith design•Features a guaranteed fit and are compatible with the very latest breather system (early breathers too)

•Include adequate clearance for all factory frames•Fully machined from domestic aircraft grade aluminum alloy billets•Are not subject to warpage and oil seepage as die-cast imported copies•The underside of the covers have been machined for additional clearance which will accommodate virtually any high-lift cam

•Available in a polished or chromed finish•Polished stainless button-head allen screws and washers are also included

•Made in the U.S.A.•Sold each

10

PART # DESCRIPTION SUG. RETAIL2001-0518 Driving light kit w/ 1” clamps $149.952001-0519 Driving light kit w/ 11/4” clamps 149.95

2” UNIVERSaL DRIVING LIGHT KITS•Greatly increase the ability to see and be seen on the road

•Feature chrome-plated 2” steel housings, 55W halogen sealed beam lights and swivel mounts with hardware

•Compact; available with either a 1” or 11/4” clamp

•Mount to engine guards, handlebars, inside fairings or on light bar•Includes switch, relay, all necessary wiring and detailed instructions

PART # DESCRIPTION SUG. RETAIL2040-0819 For all 41/2” H-D light housings $119.95

LED SUN SPOTS™ DRIVING/PaSSING LaMP•Upgrade the stock 41/2” driving/passing lamps found on H-D models with lightbars

•Feature 162 incredible bright-white Genesis™ II LEDs for unmatched performance

•Sold each

PART # DESCRIPTION SUG. RETAIL2040-0817 Plasma Rod (ea.) $59.952040-0818 Plasma Rods (pr.) 119.95

PLaSMa RODS™•Priority patented LED technology that produces a bright, incredibly smooth light output, unlike anything you have seen before

•Single-intensity two-wire design•Work on all 12VDC negative ground systems•Can be used about anywhere but work great as turn signals or brake lights located between your bags and your fender/filler panel or as a third brake light located under your tour pak

•Use one of a Custom Dynamics Run-Brake-Turn controllers (See 2011 FatBook) to allow your Plasma Rods™ to function as running, brake and turn lights

•Measure 8” x 0.3” x 1” and mount with 3M automotive grade tape (included)

YUASA REFERENCE # PART # DESCRIPTION SUG. RETAILYIX24HL-BS 2113-0223 For 84-96 FLT, FLHT $114.95YIX30L 2113-0222 For 97-11 FLT, FLHT,

FLHX, FLHR, FLTR and H-D FL Trikes 116.95

POWER MaX MaINTENaNCE-FREE BaTTERIES•Completely sealed black case can be mounted in almost any position•Advanced technology allows very high power discharge•Accept a high rate of recharge without damage to the battery•Can be recharged over 90% in less than one hour on a regulated charger•Batteries MUST BE CHARGED in the same manner as any lead acid battery•When not in service, batteries should be charged once a month

PART # DESCRIPTION SUG. RETAILFOR 84-99 EVOLUTION BIG TWIN, 86-03 EVOLUTION XL MODELS0940-0983 Polished $349.950940-0984 Chromed 430.95

2040-0818

2040-0817

2001-0519

0940-0984

STERLING CHROMITE II HIGH EFFICIENCy CLUTCH CaBLES•Only STERLING CHROMITE® II uses patented technology to create an exclusive braid that looks like chrome•All fittings are polished and chrome plated•New adjuster with integrated water resistant seals does not require boot•Perfectly matches the color and weave of all other Magnum cables and lines•Low effort, maximum efficiency cable design exceeds all OEM specifications for fitment, construction, and endurance requirements•Covered with a crystal clear Teflon® outer jacket for exceptional protection against scuffing paint or chrome and will not yellow from sunlight•Rubber seal in transmission and handlebar fittings eliminates fluid leaks and lubrication stains•All cables are made with anti-friction inner liners, nylon adjuster inserts, and are factory lubricated for smooth and consistent long-lasting operation

•Made in the U.S.A.

NOTE: Check torque spec on transmission fitting when installing.

LaTE STyLE CaBLES aRE MEaSURED WITH THE aDJUSTER COMPLETELy COLLaPSED.

11

PART # DESCRIPTION SUG. RETAILSTaINLESS STEEL BRaIDED KIT W/ CHROME FITTINGS0652-1555 For 87-11 Touring and Sportster models $74.950652-1556 For 87-11 Dyna and Softail models 74.95

PART # DESCRIPTION SUG. RETAILBLaCK VINyL KIT W/ BLaCK CHROME FITTINGS0652-1557 For 87-11 Touring and Sportster models $59.950652-1558 For 87-11 Dyna and Softail models 59.95

BUILD yOUR OWN (ByO) CLUTCH CaBLE KITS•Available in two styles: stainless steel braid with chrome fittings and black vinyl with black chrome fittings

•Looks and works as good as factory made cables•Makes the perfect length every time•BYO cables are extra long to insure fitment on most plus length applications•Easy installation – route, cut, and assemble in less than 10 minutes•Makes for a great emergency roadside kit on long trips•Use enclosed template to set free or travel length to factory specifications•Clutch cables are High-Efficiency and can make up to a 80” total length•Inner cable pull-off strength of 500+ lbs.•Fit any 2-piece cable application for 1987 and later 5- or 6-speed transmission

PART # SUG. RETAIL0652-1060 $67.950652-1061 67.95

PART # SUG. RETAIL0652-1062 $64.950652-1063 67.95

PART # SUG. RETAIL0652-1064 $67.950652-1065 64.95

PART # SUG. RETAIL0652-1066 $64.950652-1067 65.95

PRICE LIST

FITS MODEL PART # HOUSING LENGTH ADJUSTER LOCATION FROM TRANS TRAVEL OEM #SOFTaIL00-06 FXST/I 0652-1065 647/16” 3215/16” 23/4” 38666-0000-06 FXSTS/I 0652-1065 647/16” 3215/16” 23/4” 38666-0000-06 FLSTC/I 0652-1065 647/16” 3215/16” 23/4” 38666-0006 FLST/I 0652-1065 647/16” 3215/16” 23/4” 38666-0000-06 FLSTF/I 0652-1065 647/16” 3215/16” 23/4” 38666-0000-06 FLSTS/I 0652-1065 647/16” 3215/16” 23/4” 38666-00DyNa GLIDE00-05 FXD 0652-1065 647/16” 3215/16” 23/4” 38666-0000-05 FXDX 0652-1065 647/16” 3215/16” 23/4” 38666-0000-05 FXDXT 0652-1065 647/16” 3215/16” 23/4” 38666-0001-03 FXDWG2/3 0652-1065 647/16” 3215/16” 23/4” 38666-0001-05 FXDL 0652-1065 647/16” 3215/16” 23/4” 38666-00XL96-03 XLH 883 HUGGER 0652-1062 571/4” 201/2” 29/16” 38662-0099 XL 883C 0652-1062 571/4” 201/2” 29/16” 38662-0096-03 XLH 1200 0652-1062 571/4” 201/2” 29/16” 38662-0096-99 XL 1200C 0652-1062 571/4” 201/2” 29/16” 38620-96

STERLING CHROMITE II STaNDaRD LENGTH HIGH EFFICIENCy CLUTCH CaBLES

FITS MODEL PART # HOUSING LENGTH ADJUSTER LOCATION FROM TRANS TRAVEL OEM #89-06 DRESSERS, 86-11 XL

0652-1060 631/4” 201/2” 29/16” -0652-1061 651/4” 201/2” 29/16” -0652-1063 677/16” 3215/16” 23/4” -

87-06 BIG TWIN, 87-89 DRESSERS (EXCEPT 06 DyNa)0652-1066 5511/16” 3215/16” 23/4” -0652-1067 5911/16” 3215/16” 23/4” -0652-1065 647/16” 3215/16” 23/4” -0652-1063 6711/16” 3215/16” 23/4” -0652-1064 7011/16” 3215/16” 23/4” -

STERLING CHROMITE II aLTERNaTIVE LENGTH HIGH EFFICIENCy CLUTCH CaBLES FOR CUSTOM HEIGHT/WIDTH HaNDLEBaRS

CLUTCH CaBLE KITS

0652-15550652-01557

12May 2011 | 9901-1018

JOKER MaCHINEIf it has two wheels on it the folks at Joker Machine have probably turned out a part or two that will make it perform better, look great and draw some looks from admirers passing by. Whether it is Speedway aspirations, Café racin’ or just down and dirty on the streets, Joker’s high-quality made in the U.S.A. parts and accessories are recognized by riders who want cutting edge style with performance to match. Deal yourself in on the action today.

PART # DESCRIPTION SUG. RETAILFOR 01-11 TWIN CaM MODELS W/ DELPHI EFI (EXCEPT 08-11 FLHT/FLHR/FLHX/FLTR aND HD FL TRIKE)1010-0934 Finned, black $289.951010-0935 Smooth , black 289.951010-0936 Behind the 8 Ball, black 289.951010-0937 JM U.S.A., black 289.951010-0938 Money to Burn, black 289.951010-0939 Joker, black 289.951010-0940 Lucky 7, black 289.95FOR 07-11 XL MODELS W/ EFI1010-0945 Finned, black 259.95

PART # DESCRIPTION SUG. RETAILFOR 07-11 XL MODELS W/ EFI (CONT)1010-0946 Finned, chrome $269.951010-0949 JM U.S.A., black 259.951010-0951 Joker, black 259.951010-0953 Smooth, black 259.95FOR 91-06 XL MODELS W/ CV CaRB1010-0947 Finned, black 259.951010-0948 Finned, chrome 269.951010-0950 JM U.S.A., black 259.951010-0952 Joker, black 259.951010-0954 Smooth, black 259.95

HIGH-PERFORMaNCE DIaMOND aIR CLEaNER aSSEMBLIES•Super-clean design features all CNC-machined billet aluminum construction throughout•Equipped with a genuine K&N 4” diameter high-flow filter•Has Joker’s exclusive “baffle plate” crankcase breathing system held all together with high-strength 12-point alloy mounting bolts•Improves leg clearance over the stock air cleaner assembly due to its compact design•Available in hard black anodized and chrome finishes•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 07-11 XL MODELS W/ EFI1010-0941 Joker Racing, black $249.951010-0942 Joker Racing, chrome 259.95

PART # DESCRIPTION SUG. RETAILFOR 91-06 XL MODELS W/ CV CaRB1010-0943 Joker Racing, black $249.951010-0944 Joker Racing, chrome 259.95

HIGH-PERFORMaNCE aIR CLEaNER aSSEMBLIES•Super-clean design features all-CNC-machined billet aluminum construction throughout

•Equipped with a genuine K&N 4” diameter high-flow filter•Has Joker’s exclusive “baffle plate” crankcase breathing system, held all together with high-strength 12-point alloy mounting bolts

•Improves leg clearance over the stock air cleaner assembly due to its compact design

•Available in your choice of hard black anodized or chrome-plated finishes•Made in the U.S.A.

1010-0941

1010-0934

1010-0939 1010-0940 1010-09481010-0945

1010-09351010-0936 1010-0937 1010-0938

1010-0942