Maxxum MX Series
-
Upload
christine-schultz -
Category
Documents
-
view
373 -
download
0
Transcript of Maxxum MX Series
Engineered for Productivity
MX Series tractors are engineered to provide
smooth, reliable performance under any field conditions.
By moving the engine forward, lengthening the wheel
base, and improving weight distribution with a heavy,
one-piece cast-iron frame, both stability and weight
distribution have been greatly improved.
The new Mechanical Front Drive offers a heavy-duty
lube-for-life driveline and a 55 degree turning angle for
greater maneuverability and the best turning radius inits class. And the new 2WD front axle is the same heavy
duty axle found on MAGNUM tractors.
Standard turbocharged 5.9 L, 6 cylinder diesel engines
deliver up to 44% torque rise and are isomounted toisolate vibration and noise from the all-new cab.
Case IH Pressure-Flow Compensated (PFC)
hydraulics, with 47% more hydraulic flow and
28.9 GPM pump, sense hydraulic requirements, thenmatch the exact flow needed for the load to minimize
power requirements and stress on the system.
MX Series tractors also maximize your productivity in
even the toughest situations with a choice of rugged,
standard 16-speed synchronized, powershift or
32-speed creeper transmissions.
22
25 GPM max flow at the remotes
Electronically controlled PTO
with reversible, single shaft540/1000 RPM.
CAT 11/111N standard on all models.
Heavy duty, four-gear planetary final
drive provides maximum tooth
contact for increased powertrain life.
Pressure Row Compensated (PFC)
hydraulic pump produces 28.9 GPM
(f09 Umin) at 2200 engine rpm.
Vertically mounted, high capacity
hydraulic filter with fOOO hr change interval.
The engine is mounted on 4specially
designed isomounts to isolate enginevibration and noise
from the frame.
Flange axles and 112" (2844 mm)
bar axles are available for increased versatility.
A 16speed synchronizedtransmission is standard on all
models except the MX 135,
which has a powershift
transmission with synchronized
range. StJ1ndardcreeper and
super creeper transmissions areavailable on all models.
Massive, heavy-cast side rails
include mounting pads fortJ1nks,
side mounted mowers, orotherequipment
RELIABLE POWERTRAIN
A high capacity torsional dampener
can handle 80% greater torque loads
than the previous MAXXVM Series,
which creates a quieter, smoother
operating environment
A heavy duty, ConstJ1ntVelocity
Shaft, with lube-for-life V-joints,
connects the engine and
transmission.
All MX Series models have quick
response turbochargers for high
lugging ability.
Slide out oil cooler and air
conditioner condenser make
cleaning easy.
A rugged Mechanical Front Drive
(MFD) is optional on all models. The
MFD is integrated into the tractor's
overall design to withstJ1ndyour
most demanding traction
requirements.
23
24
The compact, non-structural engine
design is solely dedicated to providing
raw agricultural power. The engine
contains up to 40% fewer parts than
competitive engines. Components such
as the oil and water pump housing, oil
cooler housing, oil filter and alternator
mounting are all cast into the block This
adds strength and eliminates parts such
as gaskets, resulting in greater
performance and reliability.
The air intake port is designed for
efficient air mixing, which is required for
optimum combustion and top fuel
efficiency. A short exhaust port quickly
expels heat. This improves turbocharger
efficiency, extends service intervals and
prolongs engine life.
Engine valve covers are
individually a-ring sealed to
prevent oil leakage at the
valve cover area due to engine
temperature fluctuation.
Intake and exhaust manifolds are
located on opposite sides of the
engine head to greatly improve
engine efficiency by creating a
natural cross-flow air pattern.
5 hole Bosch injectors provide
increased fuel atomization for full
power and better fuel economy.
An alternating valve design keeps
the engine operating cooler and
more efficiently. And valves
rotate automatically, eliminating
mechanical rotators for design simplicity.
Seven large diameter main bearings provide excellent load
carrying capacity.
Turbochargers are specially designed for these engines. As
a result, Case engines are more fuel efficient and capable
of delivering higher horsepower with less engine stress.
A slide-out oil cooler and air conditioner condenser allows
for easier cleaning of the oil cooler, air conditioner and radiator.
A double-shrouded water pump impeller
increases the system's ability to with
stand adverse conditions while reducing
the potential for a vapor pocket to entrap
air. For greater reliability, the water pump
uses an a-ring seal instead of a gasket.
A POL Y-VEE fan belt extends belt life up to three times
that of conventional belts. This single belt does the
job of several belts on other diesels, simplifying
maintenance and improving reliability. An
automatic belt tensioner minimizes wear and
prevents slippage, which is a cornman cause of
engine overheating.
Built-in piston oil cooling sprays oil from the crankshaft to
the bottom of the piston for outstanding lubrication and cooling.
POWER & PERFORMANCE
Turbocharged Power
25
Case IH tractors are known for. By casting components
into the block, the new engines have up to 40% fewer
parts than competitive engines.
The special new, lube-for-life joints on the drive shaft,
between the engine and the transmission, eliminate greas
ing and extend the life span of your investment. And a
new, aspirated exhaust draws dirt out of the
air cleaner and eliminates it from the sys
tem through the exhaust.The :MXSeries Mechanical Front Drive
has been redesigned to serve you better. A
totally new front axle lets you mount larger
diameter front tires to decrease ground
pressure and increase clearance. The optionalnew MFD, in heavier housing, automatically
sends power to the front axle to help pull you
through rough areas in the field. And the
improved, 55 degree turning angle adds
maneuverability to improve productivity.
A new temperature-controlled viscous fan
increases fuel efficiency and cooling, while
decreasing noise.
The new MAXXUM :MXSeries tractors have been
improved from the bottom up. Narrower, cast iron side rail
frames improve the strength, turning radius with larger
front tires, and stability of the new line. And engines
mounted using isomount technology, reduce vibration and
noise, making MAXXUM tractors even quieter and morecomfortable.
'Ib improve weight transfer and increase
stability, the engine has been moved forward 10.77" (273.5 mm) on the frame. The
6.4% longer wheelbase provides better
weight distribution and improved handling
under heavy loads. Better stability lets you
work with fewer front weights and improves
fuel efficiency, while reducing compaction.Modern design, turbocharged, 5.9 liter,
6 cylinder, 359 cubic inch diesel engines give
you the power you need, when you need it.
The :MX Series still has the same deeptorque reserves and fuel efficiency
A sleeveless, integral bore engine has no
cylinder liners to replace. This eliminates
cylinder sleeve leakage and minimizes
cavitation erosion. This durable design
features less bore distortion and better oil
control for longer life. Cylinders are honed
to size, then receive a second plateau
honing to remove the sharp peaks from the
cylinder wall. This results in reduced friction
and better sealing.
Reversible 54011000 rpm PTO shaft.
Just reverse shaft to change from
540 to 1000 rpm.
The PTO clutch pack Engaged clutch pack
for PTO use. Clutch pack is pressure
lubricated for longer life and cooling.
Designed For Performance
Case IH offers a range of durable transmission options
designed to maximize performance. With 125 million
hours of field-proven reliability, MAXXUM powershift andsynchromesh transmissions will stand up to your tough
est demands. Uniquely designed for efficiency and
strength, these transmissions fit the way you farm.
With a power flow similar to that of the synchronized
transmission, the powershift transmission is driven by a
constant velocity shaft, with lube-for-life U-joints, which
connects the engine to the transmission.
Input power passes into the selected powershift speed
transmission clutch pack, through the optional speed
gears, to the forward and reverse (FIR) clutch packs.
From the FIR clutch packs, the power is taken to the rear
differential through the selected range transmission gear.
Power is also directed forward, through a set of drop
gears, to the MFD clutch pack. Power flow continues forward out of the transmission to the MFD axle when the
clutch pack is engaged.
26
High capacity ring
and pinion
REAR FRAME SECTIONRANGE
TRANSMISSION
SECTION
Drive gears for the
hydraulic pump
SPEED TRANSMISSION SECTION
DURABLE TRANSMISSIONS
Drop gears
Standard creeper and super
creeper reduction gears. These
gears are installed for specialty
crop and extra slow speed
operation.
Multi-disc MFD clutch pack Engage
clutch pack to power MFD front axle.
Clutch is pressure lubricated for
long life and cooling.
Powershift clutch packs.
Oil pressure lubricated for
longer life and cooling.S2 S1 S4 S3
Drive gears for the independent
power take-off (PTO)
The PTO drive shaft for input into the
PTO clutch pack
Themassive
constant velocityshaft connects
the engine to thetransmission
The independent live PTO picks up its drive from the
constant mesh speed transmission clutch pack gears.
Power then flows rearward to the PTO clutch pack. This
shaft is also the drive for the hydraulic pump prior to
going into the PTO clutch pack. Power flows through the
clutch pack, when engaged, out the rear of the tractor viathe reversible 540/1000 rpm PTO shaft.
All clutches are oil lubricated and cooled by a high flow
oil to ensure reliable performance and long clutch life.
The direction of travel may be engaged by flipping the
power shuttle lever from neutral to forward or reverse.
The power shuttle lever is mounted on the steeringcolumn for high productivity and operator comfort.
This well proven design adds up to a more durable,
longer life transmission to meet the everyday demands
of feedlot operations and the transmission speeds required
of fieldwork applications.
27
When you finance throughCase Credit, you get more thanthe best equipment. You getconvenient, flexible financingand competitive rates. Alongwith fast approval right whereyou purchase your equipment at your Case IH dealership.
We're that close to your business. And we use that uniquerelationship to craft innovativefinance programs that makesense for your farming operation.
Case Credilslandard lerms and conditions apply.
Finaocing subject to Case Credit approval.
Equipment financing
on your terms.
CASE CREIJITBringing people and product together. ®
Programs that offer flexiblepurchase options for your equipment. Or with LeaseRite;" ournewest leasing product, youmake a small initial investment
and low payments, conservingcapital for other needs.
It's no wonder we're known
for Bringing people and producttogether.®After all, when youwork with farmers, you betterknow the business.
Case Creditproouctsand services, asdescrit>ed herein,
are applicable to lt1e Norlh.American market only.
SAFETY NEVER HURTS! Always read the Operator's Manual before operating any equipment. Inspect equipment before using~, and be sure ~ is operating properly.
Follow the product safety signs, and use any safety features provided.
Case Corporation reserves the right to make improvements in design and changes in specifications at any time w~hout notice and without incurring any obligation to install them on un~s previously sold. Specifications, descriptions and illustrative
material herein are as accurate as known at time of publication, but are subject to change w~out notice. Illustrations may include optional equipment and accessories and may not include all standard equipment.
This I~erature has been published for worldwide circulation. Availabil~ of some models and equipment builds vary according to the country in which the equipment is used. The illustrations and text may include optional equipment and accessories and may not include
all standard equipment. Your Case IH dealer/distributor will be able to give you details of the products and their specifications available in your area.
CASE CORPORATION
700 STATESTREET
RACINE,WISCONSIN 53404 USA
AE 189017
CASE CANADA CORPORATION450 SHERMAN AVENUE
HAMILTON,ONTARIO LBN4C5 CANADA
©1997 Case Corporation Printed in USA
All Rights Reserved
Visit us on the World Wide Web at htlpJ/www.casecorp.com
•CASEllI
Case IH, Case and IH are registered trademarks of Case Corporation
Case Credit is a registered trademark of Case Credit Corporation.