316 STAINLESS STEEL FITTINGS 316 STAINLESS STEEL FITTINGS ...
Maximum performance for stainless steel - Walter Tools · PDF fileMaximum performance for...
4
Press release Maximum performance for stainless steel The Walter AG has expanded the Proto·max™ milling cutter family with a new specialist cutter for stainless steel The solid carbide end mills in the Proto·max™ family from the competence brand Walter Prototyp stand for maximum machining capacity. The variant for machining steel and the variant for machining hardened materials have already lived up to this claim. The new model for machining stainless steel is matching the success of its predecessors. According to Walter, the Proto·max™ Inox offers an average performance increase of 50 percent when machining stainless steel in comparison with conventional, universal solid carbide end mills. Particular features that are exactly attuned to the ISO M material group are responsible for this enormous performance jump. The four-edged maximum cutter has two internal helical coolant channels to keep the operating temperature at a constant level, and also to remove the chips reliably and thereby ensure high process stability. The tool is therefore able to deploy its full capacity on machines where internal cooling is combined with external cooling. The new TAA coating with a TiAlN base and an optimized micro geometry counteract the typical wear mechanisms of stainless steels. Another feature of particular importance: In order to achieve low vibration running, and consequently long tool life and high-quality surfaces, the tool has unequal helix angles, i.e. 35 and 38 degrees. A further innovation is to inscribe the code letter M on the shank which stands for the ISO M material group. This inscription is intended to help the user to immediately identify the primary application of the tool. The Proto·max™ Inox is the first choice wherever valuable materials from the ISO M group are being machined and high machining rates are required at the same time. Examples can be found in certain areas of general mechanical engineering, in medical and food engineering, and also in aerospace engineering. Whether full grooves of up to 1xD c or side milling up to 2xD c , the Proto·max™ Inox is ideally equipped for components with these sorts of requirements. Walter supplies the mill in the diameter range 6 to 20 mm, with or without corner radii (R0.5 to R4).
Transcript of Maximum performance for stainless steel - Walter Tools · PDF fileMaximum performance for...
Press release
Maximum performance for stainless steel
The Walter AG has expanded the Proto·max™ milling cutter family with a new specialist cutter for stainless steel
The solid carbide end mills in the Proto·max™ family from the competence brand
Walter Prototyp stand for maximum machining capacity. The variant for machining
steel and the variant for machining hardened materials have already lived up to this
claim. The new model for machining stainless steel is matching the success of its
predecessors.
According to Walter, the Proto·max™Inox offers an average performance increase of 50 percent
when machining stainless steel in comparison with conventional, universal solid carbide end
mills. Particular features that are exactly attuned to the ISO M material group are responsible
for this enormous performance jump. The four-edged maximum cutter has two internal helical
coolant channels to keep the operating temperature at a constant level, and also to remove
the chips reliably and thereby ensure high process stability. The tool is therefore able to deploy
its full capacity on machines where internal cooling is combined with external cooling. The new
TAA coating with a TiAlN base and an optimized micro geometry counteract the typical wear
mechanisms of stainless steels. Another feature of particular importance: In order to achieve
low vibration running, and consequently long tool life and high-quality surfaces, the tool has
unequal helix angles, i.e. 35 and 38 degrees. A further innovation is to inscribe the code letter
M on the shank which stands for the ISO M material group. This inscription is intended to help
the user to immediately identify the primary application of the tool.
The Proto·max™Inox is the first choice wherever valuable materials from the ISO M group are
being machined and high machining rates are required at the same time. Examples can be
found in certain areas of general mechanical engineering, in medical and food engineering, and
also in aerospace engineering. Whether full grooves of up to 1xDc or side milling up to 2xDc,
the Proto·max™Inox is ideally equipped for components with these sorts of requirements. Walter
supplies the mill in the diameter range 6 to 20 mm, with or without corner radii (R0.5 to R4).
Printable image material (see below) is available by clicking on the following link:
http://archiv.storyletter.de/download/Walter-ppr-12-49-Protomax Inox.zip
Picture: Walter Prototyp Proto·max™Inox
Caption: With helical coolant channels, the new Proto·max™Inox stainless steel specialist cutter
remains cool in every machining situation. This and other special features guarantee an
enormous increase in tool life. Picture: Walter AG
To go to the Walter website:
Scan this QR code or
go to http://goo.gl/sCmz6
To go to the Walter Multiply range of services:
Scan this QR code or
visit http://goo.gl/1u5x3
For more information about
the Walter Prototyp Proto·max™Inox:
Scan this QR code or visit http://goo.gl/UaA3n
Contact details for customer enquiries: Walter sales company Tel. + E-mail Argentina +54 11 4654 2357 Walter ARGENTINA S.A. [email protected] Australia, New Zeeland +61-3-8793 1000 Walter Australia [email protected] Austria +43-1-512 73 00-0 Walter Austria GmbH [email protected] Belgium +32-2-725 85 00 WALTER BENELUX N.V./S.A. [email protected] Brazil +55 (0) 15 32 24 57 00 Walter DO BRASIL Ltda. [email protected] Canada +1 800-945-5554 Walter Canada [email protected] China, Taiwan +86-510-85372199 Walter WUXI Co. Ltd. [email protected] Czech Republik +420-541-423 352 Walter CZ spol.sr.o. [email protected] France +33-3-88 80 20 00 Walter FRANCE [email protected] Germany +49 7071 701 0 Walter AG [email protected] Great Britain, Ireland +44-15 27-83 94 50 Walter GB LTD. [email protected] Hungary +36-1-371-16 00 Walter HUNGÁRIA Kft. [email protected] India +91 020 30457300 Walter INDIA Tools & Machines Pvt. Ltd. [email protected] Italy +39-031-926 111 Walter Italia s.r.l. [email protected] Japan +81(0)52-7235800 Walter Tooling Japan KK Malaysia +60 (3) 8023 7748 Walter Malaysia Sdn. Bhd. [email protected] Mexico +52 (844) 450-3500 Walter TOOLS S.A. de C.V. [email protected] Poland +48 22 85 204 95 WALTER POLSKA sp.z.o.o. [email protected] Romania +40 (0) 256 406218
Walter Austria GmbH Reprezentanta [email protected] Russia +7 (812) 334 54 56 LLC Walter [email protected] Singapore, Indonesia +65 67736180 Walter AG Singapore Pte. Ltd. [email protected] Skandinavia +46 (0) 35 16 53 00 Walter Norden [email protected] Slovenia +386-262 901 30 Walter Austria GmbH - Podružnica Trgovina Slovenija [email protected] Slowakia +421-37-65 31 613 Walter SLOWAKEI, o.z. [email protected] South Korea +82-31-3646 100 Walter KOREA Ltd. [email protected] Spain +34-934 796 760 Walter TOOLS IBERICA S.A.U. [email protected] Switzerland +41-32-617 40 72 Walter (SCHWEIZ) AG [email protected] Thailand +662 687 0388 Walter (Thailand) Co., Ltd. [email protected] Turkey 0 216 528 1900 Walter Kesici Takimlar Sanayi ve Ticaret Limited Sirketi [email protected] USA +1 800 945 5554 Walter USA LLC. [email protected]
