Maulik Ppt
-
Upload
devashish-joshi -
Category
Documents
-
view
232 -
download
0
Transcript of Maulik Ppt
-
8/3/2019 Maulik Ppt
1/16
STANDARD REFERENCE
ELECTRODES,PRINCIPLES,WORKING &
COMPARISION
PREPARED BY - PRAJAPATI MAULIK R.
ROLL NO. - 920
SUBJECT - ELECTRO METALLURGY & CORROSION.DEPARTMENT OF METALLURGY & MATERIAL
SCIENCE.
FACULTY OF TECHNOLOGY AND ENGINEERING
M.S. UNIVERSITY OF BARODA.
-
8/3/2019 Maulik Ppt
2/16
They are electrodes which have stable & well-known electrode potential.
High stable electrode potential reached by redox
system with constant concentration.
Few aqueous reference electrodes & potential withrespect to S.H.E. e.g. Are,
1. S.H.E. E=0.0000V2. Saturated Calomel Electrode S.C.E. E=+0.242V
3. Copper Copper sulfate Electrode E=+0.318V
-
8/3/2019 Maulik Ppt
3/16
4. Silver Chloride Electrode E=+0.225V
5. Glass electrode or pH-electrode
6. Palladium-Hydrogen electrode
The non-aqueous reference electrode is Quasi-Reference Electrode (QRE).
-
8/3/2019 Maulik Ppt
4/16
Standard Hydrogen Electrode (SHE) also called asNormal Hydrogen Electrode (NHE).
Absolute electrode potential estimated to be 4.4V 4.6V.
Because of basis of comparison with all otherelectrode reactions, then declared to be zero.
Redox reaction, 2H + 2e H.
According to Nernst eq.E = RT/F ln( aH+/(pH2/p
0) 1/2)
-
8/3/2019 Maulik Ppt
5/16
1. Platinized platinum electrode.
2. Hydrogen blow.
3. Solution of acid with activity of
H+
ion.4. Hydroseal for prevention of O2
interfearence.
5. Reservoir through which second
half element of galvanic cellattached.
-
8/3/2019 Maulik Ppt
6/16
Saturated Calomel electrode (SCE) based on reactionbetween mercury & mercury chloride.
Electrode is normally linked via porous frit of salt
bridge which immersed in solution.E=E Hg22+
/Hg - RT/2F ln (Cl-)2
Potential of SCE is +0.244V (1N KCl).
Use In pH measurement , cyclic voltammetry &
electrochemistry. Silver/silver chloride also work same way.
-
8/3/2019 Maulik Ppt
7/16
Outer body made ofglass.
Tip is porous frit.
Containing saturatedKcl solution.
At cental Hg Hg2clpast.
At top electricalcontact.
-
8/3/2019 Maulik Ppt
8/16
It works on base of redox reaction copper & itssalt- copper sulfate.
Nernst equation given by,
E=0.337+RT/2Flnacu2+
Potential of electrode is +0.318V.
It is used in one of half cell in daniel Jakobigalvanic cell & copper coulometer.
-
8/3/2019 Maulik Ppt
9/16
Commercial electrode isplastic tube holdingcopper rod & saturatedsolution of coppersulfate. Porous plug atend allows to contactto electrolyte.
-
8/3/2019 Maulik Ppt
10/16
It is most commonly used for testing cathodicprotection control system in sea waterenvironment.
Redox reaction : Ag0 + cl- Agcl + e-
Ag0 + cl- Agcl + e-
Nernst equation given by,
E = E0 RT/F lnacl-
Standard potential of electrode is 23010mV.
However potential very sensitive to trace ofbromide ions which make it more negative.
-
8/3/2019 Maulik Ppt
11/16
Outer body is ofglass.
Bottom ceramic ,
quartz or glassfiber junction.
Inside potessiumchloride solution.
Contected withsilverchloride salt &wire of silver.
-
8/3/2019 Maulik Ppt
12/16
It is made from glass having special composition.
Mainly two types of glass,
1. Silicate : having Sio2 (matrix) & Li, Na , K, Al ,etc.
2. Chlcogenide : having molecules of AsS, AsSe,etc. Potential of electrode given by Nikolsky equation,
E = E0 + RT/F ln (aH+ + KHNa * aNa
+)
Where, KHNa
= selective coefficient , for glasselectrode for Na ion in H+ ion.
Working range pH=1 to 12.
-
8/3/2019 Maulik Ppt
13/16
1. Alkline error range (Non linear)2. Acidic error range
3. Linear range
Typical E vs pH diagram
http://en.wikipedia.org/wiki/File:PH_graph.jpg -
8/3/2019 Maulik Ppt
14/16
1. Sensing part , made by
specific glass.
2. Precipitates of Agcl.
3. 0.1M Hcl solution .4. Internal calomel electrode.
5. Glass body
6. Reference electrode
7. Junction with studied
solution.
Diagram for pH glass electrode
-
8/3/2019 Maulik Ppt
15/16
Abbreviation: Pd/H2 Its characteristics similar to standard hydrogen
electrode (with platinum).
Potential of electrode is given by,
E = E0 + RT/F ln (aH+/(pH2)1/2)
Significant feature of paddalium is absorbmolecular hydrogen .
Other feature is absence of non stop bubbling ofmolecular hydrogen through solution.
-
8/3/2019 Maulik Ppt
16/16