MatrixCOMBO Plating Set. Streamlined set for craniofacial ...synthes.vo.llnwd.net/o16/Mobile/Synthes...

MatrixCOMBO Plating Set.Streamlined set for craniofacial andmandibular trauma and reconstruction.

Primary implantsand instrumentsfrom theMatrixMIDFACEandMatrixMANDIBLEPlating Systems

Organized storagesystem

Reduced inventory

MatrixCOMBO Plating Set. Streamlined set for craniofacial and mandibular trauma and reconstruction.

The aim of surgical fracture treatmentis to reconstruct the bony anatomy andrestore its function. According to theAO, internal fixation is distinguished by anatomical reconstruction, stablefixation, preservation of blood supply,and early, active mobilization.1 Plateand screw osteosynthesis has been established and clinically recognized for some time.

With the AO philosophy at its core, the Matrix plating platform for internalfixation of the craniomaxillofacial skeleton addresses neuro, craniofacial,mandibular, and orthognathic surgery.Matrix is a simple, yet comprehensive,system that offers flexibility and ease of use.

The MatrixCOMBO Plating Set isstreamlined and organized for thetreatment of craniofacial and mandibulartrauma and reconstruction. Key implants and instruments from the MatrixMIDFACE and MatrixMANDIBLEPlating Systems are combined in a singlegraphic case.

For specific product information seethe respective system technique guide.

Note: The MatrixCOMBO Plating Setincludes items shown.

Synthes MatrixCOMBO Plating Set

MatrixCOMBO Plating Set (01.503.400)

1. M.E. Müller, M. Allgöwer, R. Schneider, and H. Willenegger:Manual of Internal Fixation, 3rd Edition. Berlin; Springer-Verlag. 1991.

Mandible Instrument Tray

MatrixMIDFACE Trauma Module

MatrixMANDIBLE Trauma Module

Synthes 1

MatrixMANDIBLE Reconstruction Module

IMF Screw Module

Matrix General Instrument Tray

Lag Screw Instrument and Implant Module

Matrix System– All screws work with all plates

within each Matrix system– Reduced plate/screw profile

where applicable– Improved screw retention and

reduced cam-out* – Standardized instrumentation– Reduced inventory for hospitals

without compromising clinical solution

MatrixCOMBO– Facilitates treatment of

panfacial fractures – Eliminates need to pull separate sets

to treat mandible and midface cases– Modular system allows set to be

configured per surgeon and hospital needs

– Side-loading graphic case for complete set visibility

*Mechanical test data on file at Synthes.

Indications

The Synthes MatrixMIDFACE Plating System is intended foruse in selective trauma of the midface and craniofacial skeleton; craniofacial surgery; reconstructive procedures, and selective orthognathic surgery of the maxilla and chin.

The Synthes MatrixMANDIBLE Plate and Screw System is intended for oral, maxillofacial surgery: - Trauma- Reconstructive surgery- Orthognathic surgery (surgical correction of

dentofacial deformities)

2 Synthes MatrixCOMBO Plating Set

Note: Please refer to package insert for full list of indications, contraindications, warnings and precautions.


Synthes 3

Instrument Tray for General Instruments (60.511.102)

60.511.104 Finger Mat for use in 60.511.102

306.752 Mini IMF Screw Module

03.503.034 Mini Plate Holder, long

03.503.035 In-Plane Bender for MatrixMIDFACE Plates

03.503.037 Mesh Cutting Scissors, long nose

03.503.038 Plate Bender for Midface Plates, 2 ea.

03.503.039 Plate Cutter for Midface Plates

03.503.062 MatrixMANDIBLE Plate Introducing Forceps

03.503.801 Orbital Retractor, left

03.503.802 Orbital Retractor, right

03.507.000 T-Handle, hex coupling, small

03.507.003 3.5 mm Threaded Reduction tool, self-tapping, 78 mm, hex coupling

03.507.005 2.4 mm Drill Guide

03.511.003 Plate Holder for Reversible Matrix Plates

310.572 2.4 mm Drill Bit, Stryker J-Latch, 75 mm

311.006 Screwdriver Handle, with hex coupling,medium, 2 ea.

311.023 Ratcheting Screwdriver Handle, 2 ea.

Bone Reduction Forceps

398.985 Large

398.986 Small

398.987 Small, Straight

306.752 Mini IMF Screw Module

201.928 2.0 mm IMF Screw, self-drilling, 8 mm, 3 ea.

201.932 2.0 mm IMF Screw, self-drilling, 12 mm, 3 ea.

291.230.98 0.5 mm Precut Cerclage Wire, 175 mm, 2 ea.

291.240.98 0.6 mm Precut Cerclage Wire, 175 mm, 2 ea.

313.939 2.4 mm/3.0 Cruciform Screwdriver Blade,hex coupling

313.97 Holding Sleeve

317.68 1.5 mm Drill Bit , Stryker J-Latch, 8 mm stop, 2 ea.

317.72 1.5 mm Drill Bit , Stryker J-Latch, 12 mm stop, 2 ea.

Note: For additional information, please refer to package insert. For detailed cleaning and sterilization instructions, please refer tohttp://us.synthes.com/Medical+Community/Cleaning+and+Sterilization.htmor to the below listed inserts, which will be included in the shipping container:– Processing Synthes Reusable Medical Devices—Instruments, Instrument Trays

and Graphic Cases—DJ1305– Processing Non-sterile Synthes Implants—DJ1304



Instrument Tray for Mandible Instruments (60.511.103)

306.712 Insert Tray for Trocar Instrumentation

306.713 Insert tray for Plate Bending Irons andSmall Plate Benders

03.503.036 MatrixMANDIBLE Depth Gauge

03.503.056 MatrixMANDIBLE Combination Bender

03.503.057 MatrixMANDIBLE Short Cut Plate Cutter,for use with 1.5 mm through 2.8 mmplates, 2 ea.

MatrixMANDIBLE Bending Irons03.503.077 Left03.503.078 Right

03.503.079 MatrixMANDIBLE Small Plate Cutter, for usewith 1.0 mm, 1.25 mm and 1.5 mm plates

306.82 Plastic Cup with Lid, for Elastomeric Inserts

Alternative Options for 306.713306.714* Insert Tray for Plate Bending Pliers

60.511.116* Finger Mat

306.714

60.511.116

306.713

*Also available

Synthes 5

306.712 Insert Tray for Trocar Instrumentation

03.503.045 MatrixMANDIBLE Trocar Drill Guide

03.503.047 MatrixMANDIBLE Threaded Trocar DrillGuide

03.503.476 MatrixMANDIBLE 1.5 mm Calibrated DrillBit, J-latch, 125 mm. 2 ea.

03.503.477 MatrixMANDIBLE 1.8 mm Calibrated DrillBit, J-latch, 125 mm, 2 ea.

397.211 Universal Trocar Handle

397.213 2.0 mm Cannula and Obturator

397.232 Malleable C-Retractor

397.42 2.0 mm Cheek Retractor Blade

397.43 2.0 mm Cheek Retractor Ring



Matrix Auxiliary Module, medium for MatrixMIDFACE System (60.511.110)

60.511.108 Screws, Drill Bits, Blades Insert, withrecessed holes

60.511.112 Orbital Plate and Mesh Insert

60.511.114 0.5 mm/0.7 mm Plate Insert, half height, 2 ea.

306.640 Plate Insert for MatrixMIDFACE GenericModule

60.511.112 Orbital Plate and Mesh Insert

Titanium MatrixNEURO Contourable Mesh, 38 mm x 45 mm, 0.4 mm

04.503.081 Silver, malleable

04.503.082 Blue, rigid

Titanium MatrixMIDFACE Orbital FloorPlates, anatomic, 0.3 mm thick, 2 ea.

04.503.301 Small

04.503.302 Medium

04.503.303 Large

04.503.307 Titanium MatrixMIDFACE Orbital MeshPlate, 0.3 mm thick, 2 ea.

306.640 Plate Insert for MatrixMIDFACEGeneric Module

Titanium MatrixMIDFACE PreformedOrbital Plates, 2 ea.

04.503.801 Small, left

04.503.802 Large, left

04.503.811 Small, right

04.503.812 Large, right

Synthes 7

60.511.108 Screws, Drill Bits, Blades Insert, withrecessed holes

Titanium MatrixMIDFACE Screws, self-drilling

Length (mm) Pkgs. of 5

04.503.223.05 3 2

04.503.224.05 4 10

04.503.225.05 5 10

04.503.226.05 6 10

04.503.228.05 8 4

Titanium MatrixMIDFACE Screws, self-tapping


04.503.210.05 10 2

04.503.212.05 12 2

Titanium MatrixMIDFACE Emergency Screws Length (mm) Pkgs. of 1

04.503.233.01 3 2

04.503.234.01 4 10

04.503.235.01 5 10

04.503.236.01 6 10

04.503.238.01 8 4

04.503.240.01 10 2

04.503.242.01 12 2

Matrix 1.1 mm Drill Bits, Stryker J-latch, 2 ea.

03.503.244 4 mm stop

03.503.246 6 mm stop

03.503.248 8 mm stop

MatrixMIDFACE 1.25 mm Drill Bits, StrykerJ-latch, 2 ea.

03.503.110 10 mm stop

03.503.112 12 mm stop

03.503.202 MatrixMIDFACE Screwdriver Blade, hexcoupling, self-retaining, 76 mm, 2 ea.

Alternative Option for 60.511.108

60.511.107* Screws, Drill Bits, Blades Insert, with non-recessed holes

60.511.108

60.511.107

*Also available



Matrix Auxiliary Module, medium, for MatrixMIDFACE System (60.511.110)

60.511.114 0.5 mm/0.7 mm Plate Insert, half height, 2 ea.

Titanium MatrixMIDFACE Plates, 0.5 mm thick

04.503.322 H-Plate, 11 holes, 2 ea.

04.503.323 Oblique L-Plate, 2 x 3 holes, left, 3 ea.

04.503.324 Oblique L-Plate, 2 x 3 holes, right, 3 ea.



04.503.327 T-Plate, 3 x 4 holes, 2 ea.



04.503.343 Orbital Rim Plate,12 holes, 3 ea.

04.503.346 Adaption Plate, 20 holes, 3 ea.

04.503.347 Y-Plate,1 x 3 holes, 2 ea.

04.503.348 Double X-Plate, 6 holes, 2 ea.

04.503.360 Box Plate, 4 holes, 5 x 10 mm, 2 ea.

04.503.361 Box Plate, 4 holes, 10 x 10 mm, 2 ea.

04.503.362 X-Plate, 4 holes, 2 ea.

04.503.363 Strut Plate, 18 holes, 2 ea.


04.503.352 H-Plate, 11 holes, 2 ea.





04.503.357 T-Plate, 3 x 4 holes, 2 ea.



04.503.373 Orbital Rim Plate,12 holes, 3 ea.

04.503.376 Adaption Plate, 20 holes, 3 ea.

04.503.377 Y-Plate, 1 x 3 holes, 2 ea.

04.503.378 Double Y-Plate, 6 holes, 2 ea.

04.503.390 Box Plate, 4 holes , 5 mm x 10 mm, 2 ea.

04.503.391 Box Plate, 4 holes , 10 mm x 10 mm, 2 ea.

04.503.392 X-Plate, 4 holes, 2 ea.

04.503.393 Strut Plate, 18 holes, 2 ea.

Note: The 60.511.114 holds either 0.5 mm thick or 0.7 mm thickMatrixMIDFACE plates.

Synthes 9

Alternative Options for 60.511.114

60.511.113* 0.4 mm Plate Insert, half height


04.503.313 Orbital Rim Plate, 12 holes

04.503.316 Adaption Plate, 20 holes

04.503.317 Y-Plate, 1 x 3 holes

04.503.318 Double Y-Plate, 6 holes

04.503.330 Box Plate, 4 holes, 5 mm x 10 mm

04.503.331 Box Plate, 4 holes, 10 mm x 10 mm

04.503.332 X-Plate, 4 holes

04.503.333 Strut Plate, 18 holes

60.511.115* 0.8 mm Plate Insert, half height


04.503.382 H-Plate, 11 holes

04.503.383 Oblique L-Plate, 2 x 3 holes, left

04.503.384 Oblique L-Plate, 2 x 3 holes, right


04.503.386 Oblique L-Plate, 3 x 4 holes, right

04.503.387 T-Plate, 3 x 4 holes



04.503.396 Adaption Plate, 20 holes

04.503.397 Orbital Rim Plate, 12 holes

*Also available



306.781 Small Plate Insert for 1.0 mm MalleableMatrixMANDIBLE Plates

306.782 Insert Tray for 1.0 mm MalleableMatrixMANDIBLE Plates




306.786 Matrix Auxiliary Insert Tray, Medium

306.772 Generic MatrixMANDIBLE Screw Insert Tray,for 2.0 mm, 2.4 mm and 2.9 mm screws

306.781 Small Plate Insert for 1.0 mm MalleableMatrixMANDIBLE Plates

Titanium MatrixMANDIBLE Plates, malleable, 1.0 mm thick, 2 ea.

04.503.701 2 x 2 Hole Mini Plate, tension band, narrow


04.503.707 4 Hole Box Plate

04.503.708 8 Hole Strut Plate

04.503.709 8 Hole Strut Plate, curved, mini

04.503.750 2 x 2 Hole Mini Plate, tension band, broad



306.782 Insert Tray for 1.0 mm MatrixMANDIBLEPlates

Titanium MatrixMANDIBLE Plates, 1.0 mm thick, 2 ea.



04.503.705 12 Hole Adaption Plate

04.503.706 20 Hole Adaption Plate

04.503.780 Pre-Bent Tension Band Plate, right, 2 x 2 holes

04.503.781 Pre-Bent Tension Band Plate, left, 2 x 2 holes

MatrixMANDIBLE Trauma Module (60.511.105)

Synthes 11

306.783 Insert Tray for 1.25 mmMatrixMANDIBLE Plates


04.503.710 2 x 2 Hole DCP Plate

04.503.711 2 x 2 Hole Crescent Plate


04.503.713 3 x 3 Hole Crescent DCP Plate

04.503.714 3 X 3 Hole Angle DCP Plate

04.503.756 12 Hole Plate



04.503.715 6 Hole Plate

04.503.716 3 x 3 Hole Plate

04.503.717 12 Hole Plate

04.503.718 20 Hole Plate

04.503.721 3 x 3 Hole Angle Plate

04.503.722 3 x 3 Hole Crescent Plate





04.503.726 2 x 2 Hole Crescent Plate, broad

04.503.727 3 x 3 Hole Crescent Plate, broad

04.503.728 6 Hole Plate

04.503.729 12 Hole Plate

04.503.731 3 x 3 Hole Angle Plate, broad

306.786 Matrix Auxiliary Insert Tray, medium

Alternative options for 306.781,306.782, 306.783, 306.785

306.787* Auxiliary Insert Tray, small (not shown)

*Also available 306.786



MatrixMANDIBLE Trauma Module (60.511.105)

306.772 Generic MatrixMANDIBLE Screw InsertTray, for 2.0 mm, 2.4 mm and 2.9 mmscrewsHolds up to 240 screws (including 40emergency screws

2.0 mm Titanium MatrixMANDIBLE Screws, self-tappingLength (mm) Pkgs. of 5

04.503.405.05 5 2

04.503.406.05 6 3

04.503.408.05 8 2

04.503.410.05 10 2

04.503.412.05 12 2

04.503.414.05 14 1

04.503.416.05 16 1

2.0 mm Titanium MatrixMANDIBLE Locking Screws, self-tapping


04.503.605.05 5 1

04.503.606.05 6 2

04.503.608.05 8 2

04.503.610.05 10 2

04.503.612.05 12 2

04.503.614.05 14 1

04.503.616.05 16 1

2.4 mm Titanium MatrixMANDIBLE Screws, self-tapping*Length (mm) Pkgs. of 1

04.503.435.01 5 7

04.503.436.01 6 8

04.503.438.01 8 7

04.503.440.01 10 7

04.503.442.01 12 7

04.503.444.01 14 6

04.503.446.01 16 6

* 2.4 mm screw is the emergency screw for a 2.0 mm screw.

Synthes 13

2.4 mm Titanium MatrixMANDIBLE Locking Screws, self-tapping


04.503.638.01 8 5

04.503.640.01 10 10

04.503.642.01 12 10

04.503.644.01 14 10

04.503.646.01 16 5

04.503.648.01 18 5

2.7 mm Titanium MatrixMANDIBLE Emergency Screws, self-tapping


04.503.465.01 5 1

04.503.466.01 6 1

04.503.468.01 8 1

04.503.470.01 10 1

04.503.472.01 12 1

04.503.474.01 14 1

04.503.476.01 16 1

MatrixMANDIBLE 1.5 mm Drill BitsJ-latch, 50 mm, 2 ea.

03.503.404 4 mm stop03.503.406 6 mm stop03.503.408 8 mm stop03.503.412 12 mm stop

03.503.451 MatrixMANDIBLE 1.5 mm Drill Bit, J-latch,90 mm, for 03.503.043, 2 ea.

03.503.461 MatrixMANDIBLE 1.8 mm Drill Bit, J-latch,90 mm, for 03.503.044

03.503.043 1.5 mm Threaded Drill Guide, short

03.503.044 1.8 mm Threaded Drill Guide, short

03.503.072 MatrixMANDIBLE/THORAX Self-RetainingScrewdriver Blade, long, 2 ea.



306.610 Auxiliary Module, small

60.511.109 Insert for 2.0 mm, 2.5 mm and 2.8 mmMatrixMANDIBLE Reconstruction Plates


04.503.738 20 Hole Reconstruction

04.503.739 7 x 23 Hole Angle Reconstruction Plate, left

04.503.740 7 x 23 Hole Angle Reconstruction Plate,right

03.503.700 Bending Insert Holder– Holds up to 16 bending inserts

03.503.080 MatrixMANDIBLE Bending Insert, 8 ea.

MatrixMANDIBLE Modules and Trays

03.503.700

Synthes 15

306.755 Lag Screw Module 313.939 2.4 mm/3.0 mm Cruciform Screwdriver

Blade, hex coupling

313.97 Holding Sleeve

397.225 Lag Screw Cannula

397.226 Lag Screw Pointer

397.282 1.8 mm Insert Drill Guide

397.285 2.4 mm Drill Guide

2.4 mm Titanium Cortex Screws, self-tapping, 2 ea.

Length (mm) Length (mm)

401.520E 20 401.532E 32

401.522E 22 401.534E 34

401.524E 24 401.536E 36

401.526E 26 401.538E 38

401.528E 28 401.540E 40

401.530E 30

310.512 1.8 mm Drill Bit, Stryker J-latch, 100 mm, 2 ea.



310.805 Countersink with centering pins, for 2.4 mm screws, hex coupling


Set also includes


MatrixMANDIBLE Bending Templates

03.503.160 for Narrow Tension Band Plates

03.503.161 for 1.0 mm Broad Tension Band Plates

03.503.162 for 1.0 mm Adaption Plates

03.503.163 for 1.25 mm Straight Plates

03.503.164 for 1.25 mm 2 x 2 Hole Crescent Plates

03.503.165 for 1.25 mm 3 x 3 Hole Crescent Plates

03.503.166 for 1.25 mm Angle Plates

03.503.167 for 1.25 mm Adaption Plates


03.503.169 for 1.5 mm 3 x 3 Hole Straight Plates

03.503.170 for 1.5 mm 3 x 3 Hole Angle Plates

03.503.171 for 1.5 mm 6 Hole Crescent Plates

03.503.172 for 1.5 mm Broad 2 x 2/3 x 3 Hole Plates

03.503.173 for 2.0 mm Broad Crescent Plates


03.503.175 for 2.0 mm Broad 3 x 3 Hole Angle Plates

03.503.180 for 2.5 mm/2.8 mm StraightReconstruction Plates

03.503.181 for 2.5 mm/2.8 mm Angle ReconstructionPlates

Synthes 17

Also Available

MatrixMIDFACE Bending Templates

03.503.360 for Orbital Floor Plate, anatomic, small

03.503.361 for Orbital Floor Plate, anatomic, medium

03.503.362 for Orbital Floor Plate, anatomic, large

03.503.365 for Orbital Mesh Plates

03.503.366 for Adaption Plates

03.503.367 for Orbital Rim Plates

03.503.368 for Oblique L-Plates, 2 x 3 holes



03.503.371 for Y-Plates, 1 x 3 holes

03.503.372 for X-Plates

03.503.373 for H-Plates

03.503.374 for T-Plates

03.503.375 for Box Plates, 5 mm x 10 mm

03.503.376 for Box Plates, 10 mm x 10 mm

03.503.377 for Strut Plates

03.503.378 for Silver Double Y-Plates

03.503.379 for Blue Double Y-Plates

03.503.380 for Pink Double Y-Plates

MatrixMIDFACE Screwdriver Blades

03.503.201 Self-retaining, hex coupling, 52 mm03.503.203 Self-retaining, hex coupling, 96 mm

03.503.205 with Spring Holding Sleeve, short, hex coupling, 79 mm

03.503.206 with Spring Holding Sleeve, long, hex coupling, 95 mm

Titanium MatrixMIDFACE Adaption Plates

04.503.314 6 holes, 0.4 mm thick

04.503.315 8 holes, 0.4 mm thick

04.503.344 6 holes, 0.5 mm thick

04.503.345 8 holes, 0.5 mm thick

04.503.374 6 holes, 0.7 mm thick

04.503.375 8 holes, 0.7 mm thick

04.503.398 6 holes, 0.8 mm thick

04.503.399 8 holes, 0.8 mm thick

MatrixMandible Screws04.503.418.05 2.0 mm Titanium MatrixMANDIBLE Screw,

self-tapping, 18 mm

04.503.618.05 2.0 mm Titanium MatrixMANDIBLELocking Screw, self-tapping, 18 mm

04.503.448.01 2.4 mm Titanium MatrixMANDIBLE Screw,self-tapping, 18 mm

04.503.478.01 2.7 mm Titanium MatrixMANDIBLEEmergency Screw, self-tapping, 18 mm

04.503.648.01 2.4 mm Titanium MatrixMANDIBLE Locking Screw, self-tapping, 18 mm

Screwdriver Handles, hex coupling

03.511.004 locking, medium

311.005 small

311.007 large

03.503.073 MatrixMANDIBLE/THORAX ScrewdriverFixed Handle, self-retaining

Graphic Case Components

60.511.100 Graphic Case for MatrixCOMBO Set (includes lid)

60.511.101 Lid for MatrixCOMBO Set

60.511.106 Tray Lid

Label Sheets for MatrixMANDIBLE System

306.704 for Small Plate Module

306.706 for Large Plate Module

306.735 for Instrument Tray (306.731)

306.736 for Instrument Tray (306.732)

306.744 for Trocar Instrument Module (306.733)

306.762 Strength Gradient

306.774 for Screw Module

306.766 for Lag Screw Module

306.788 for Small Plate Insert

690.612 Screw Length Label Sheet for Calibrated Drill Bits

* Please refer to MatrixMANDIBLE and MatrixMIDFACE brochures for additionalproduct availability.


Label Sheets for MatrixMIDFACE System

306.522 for MatrixNEURO Module

306.628 for Drill Bits and Screwdriver Blades

306.630 for Small Auxiliary Module (306.610)

306.634 for 0.4 mm Plates


306.636 for Screws



306.639 for Orbital Plates

306.641 for Preformed Orbital Plates

60.511.020 for MatrixMIDFACE andMatrixORTHOGNATHIC Strength Gradients

306.728 Calibrated Drill Bit Holder

347.98 Plate Holder for 1.0 mm–2.0 mm Plates

01.503.400EPI MatrixCOMBO Plating Set—Implants

01.503.400EPA MatrixCOMBO Plating Set—Instrumentsand Cases

01.503.401 MatrixCOMBO Plating Set—Midface andMandible Trauma

01.503.402 Mandible Reconstruction Module forMatrixCOMBO Plating Set

01.503.403 Lag Screw Module for MatrixMANDIBLEPlating System

01.503.404 Mini IMF Module for MatrixMANDIBLEPlating System

01.503.405 Compact IMF Module for MatrixMANDIBLEPlating System

Also Available

Screw Length Markers

304.103W 3 mm self-drilling

304.104 4 mm


304.105 5 mm


304.106 6 mm


304.108 8 mm


304.110 10 mm

304.112 12 mm

304.114 14 mm

304.116 16 mm

304.118 18 mm

304.120 20 mm

304.122 22 mm

304.124 24 mm

304.126 26 mm

304.128 28 mm

304.130 30 mm

304.132 32 mm

304.134 34 mm

304.136 36 mm

304.138 38 mm

304.140 40 mm

Synthes CMF1302 Wrights Lane EastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322Fax: (610) 251-9056

Synthes (Canada) Ltd.2566 Meadowpine BoulevardMississauga, Ontario L5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185

© 2010 Synthes, Inc. or its affiliates. All rights reserved. Synthes is a trademark of Synthes, Inc. or its affiliates. Printed in U.S.A. 8/10 J10015-A

www.synthes.com

MatrixCOMBO Plating Set. Streamlined set for craniofacial ...synthes.vo.llnwd.net/o16/Mobile/Synthes...

Documents

Transcript of MatrixCOMBO Plating Set. Streamlined set for craniofacial ...synthes.vo.llnwd.net/o16/Mobile/Synthes...