Matrix Oxygen Injection System(MOIS)

U.S. Patent No. 5,874,001

Matrix Oxygen Injection Systems, LLC

2505 Anthem Village Drive Suite E360

Henderson, NV 89052

Advantages of using the Matrix system

• Oxygen injection technology (Simple to operate)• Delivers more oxygen than oxygen demand• Trailer mounted turnkey system (small footprint)• Quick setup and removal (Threat of hurricane)• Only requires a 230-v, 1-phase power supply • Routine maintenance every 3-6 months • (filters, belts, oil etc.) • Systems automatically restart following power outage• Safety, security and low noise level (74 dbl)

Install injection points using geoprobe or hollow stem augur

Down well “0.010” slotted screen with 12” Sump(used for oxygen dispersion)

Trench to injection well location and termination vault

Determine height of well head assembly (Note: Shallow depth of O2 tubing installation & connection to injection point)

Injection point & tubing connection: Below tubing connection pvc riser is ¾ “ diameter; Above connection bush up to 1” diameter (for more work space)

¾ “ diameter HDPE tubing delivers oxygen to injection wells

Low Sump Mortar (Flowable Fill)

Site Restoration

Termination Vault Setup

Termination vault: Finish with poured concrete and hose/clamp fittings

Secure trailer over termination vault. Inside tubing routed thru trailer floor. Tubing connects via quick connect fittings inside termination vault.

Matrix Oxygen Injection Systems LLC2505 Anthem Village Drive, Suite E360

Henderson, NV 89052www.matrixbiotech.com