Material Services REV Drill · 2019-03-08 · REV Drill HD Series Excavator weight class (min) 13...
Transcript of Material Services REV Drill · 2019-03-08 · REV Drill HD Series Excavator weight class (min) 13...
REV Drill
Material Services Infrastructure
Excavator mounted leader mast system
As of 2017, thyssenkrupp Infrastructure (tkIF) are the sole distributors for REV Drill in Australia and New Zealand.
tkIF sell, and hire REV Drill equipment in Australia and New Zealand. Our distribution is backed up by our onsite service and an extensive stock of spare parts.
tkIF are able to offer compete versatility with the REV Drill leader mast system, being able to add in house capabilities to offer a complete solution.
tkIF can fit Müller vibrators and rotary drives along with KRUPP drilling technologies to offer customers a technically sound, high quality solution, to whatever a project requires.
Whether it’s drilling, driving, extracting, hire or sale, tkIF and REV Drill have got you covered.
With the addition of REV Drill to our already existing products and servicing, tkIF are now well and truly your one integrated supplier for civil and Infrastructure groundwork projects.
thyssenkrupp and REV Drill
2
3
thyssenkrupp Infrastructure since 1983• Hire• Operator Training• Sales• Service • Tooling
REV Drill is a revolutionary approach to drilling, uniquely designed to be attached to and easily removed from any excavator, using the existing excavator hydraulics. REV Drill comes in a variety of drill lengths and configurations to match up to any excavator.
The ability to remove the drill and allow your excavator to go back to digging in minutes makes REV Drill truly unique.
The cost of a multipurpose REV Drill is a fraction of the cost of a single function specialty drill rig. The REV Drill system is self-erecting and easy to mobilise to your job site in one load, which results in substantially reduced freight costs. In addition, there is no assembly required and the drill arrives on the job site ready to go. When you have a REV Drill mast on the job, you have the use of two pieces of equipment at your disposal - a multifunction drill and an excavator.
REV Drill masts can be utilised for many vertical and horizontal drilling applications, including foundation piers, sound barrier piers, beam retaining walls, auger cast piles, tie-backs, soil nails, rock drilling, blast hole drilling, helical anchor installation, de-watering, and many more. There is no limit to REV Drill’s versatile capabilities.
Made in the USA
REV Drill products are manufactured and assembled in the United States.
Simplified, quality engineering and manufacturing ensures the REV Drill system is durable, easy to use and easy to maintain.
REV Drill HD Series
Excavator weight class (min) 13 ton
Sled travel-(stroke) 7,300 mm
Maximum drill depth 7,300 - 16,800 mm
Auger diameter range 300 - 1,800 mm
Motor rated pressure 310 bar
Motor rated torque 9,500 - 36,600 NM
Flow req. to target speed 1.6 - 3.2 ltr
Winch rated pressure 207 bar
Crowd and retract 6,400 - 18,000 kg
Winch rated flow 1.6 - 3.2 ltr
Approximate shipping weight 1,600 - 4,400 kg
Specification
6
Short Auger
The short auger is bolted onto the end of the drill’s kelly bar to drill dirt and rock for jobs where the drilled shafts will stay open and not collapse.
Casing pipe can be utilised or polymer slurry can be used when holes will not remain open.
Typical Jobs:• Sound wall foundations• Drilled shafts for foundation piers• Caissons• Temporary shoring walls
Anchoring
By removing the drill’s kelly bar and utilising specialty tooling described below, many types of anchors can be installed in both the vertical and horizontal positions.
tkIF can provide KRUPP drifters, vibrodrills and rotary heads to complement this system.
Typical Jobs:• Tie backs & soil nails – utilising
continuous flight augers, tri-cone/drag bits, down hole hammers, helical anchors, or grouted hollow bars
• Grouted hollow bar anchors, titan bars, william’s bars, etc.
• Helical anchors• Micropiles
7
Down The HoleBy removing the drill’s kelly bar and utilising down hole hammer tooling, REV Drill can effectively drill through the hardest rock formations. With the use of an external high pressure air compressor, REV Drill drills rock safely, with impressive production rates.
LP/cluster drills can be utilised for larger diameter rock drilling for increased production rates and affordability.
Typical Jobs:• Sound wall foundations• Drilled shafts for foundation piers• Caissons• Temporary shoring walls
ContinuousA continuous flight auger (CFA) can be utilised to pre drill for pile driving by drilling through the hard layers in the upper strata. Pre-drilling is performed to insure easier, faster pile driving, and to improve location accuracy when driving steel, concrete, wood piles, or sheet piling.
A CFA is also utilised in soft soils and sands where a conventional, open hole drilled shaft will not stay open and collapses, to install what is known as an auger cast pile. Upon reaching the desired drill depth, grout or concrete can be pumped through the hollow stem auger as the auger is extracted from the ground to create a continuous, concrete filled shaft. Reinforcement bars or rebar cages are often inserted immediately after the drill is extracted and the hole is filled.
8
A hydraulic, vibratory hammer can be utilised on the REV Drill mast to drive a variety of piles for many different applications by removing the rotary motor and sled from the REV Drill and installing a vibratory hammer and sled.
tkIF can provide a wide range of Müller vibratory hammers to complement this system including variable moment and vertically stacked hammers.
Typical Jobs:• Solar installations – driving tubular
pile, h-pile, steel channel, and all types of solar foundations
• Sheet pile installation
tkIF and REV Drill’s custom fabrication team can design and modify drills to meet your unique job requirements. Working together with the consulting and fabrication team, we can review your job plans and requirements and work with you to produce the most economic solution for your job.
Typical Jobs:• Drill’s mounted on long reach
excavators for difficult to reach drilling locations
• Multiple drilling heads for line drilling to speed up rock drilling production
• Small drill’s mounted on mini excavators or skid steers with slew drive mounts to access small jobsites
• Custom tooling fabrication
Vibratory Piling
Custom Applications
9
ServiceOnsite• Servicing• Repairs• Training• Maintenance
In-house• Repair and maintenance• Machinery servicing• Fabrication• Full scale spare parts• Cut to lengths orders• Maintenance
10
Consumables• Augers• Cold rolled sheet piles • Corner clutches• Hollow bar anchors• Hot rolled sheet piles • Steel tubular piles • UC column
11
thyssenkrupp Infrastructure
PO Box 5128, Chatswood NSW 2067 Australia T: +61 2 8448-3555 E: [email protected] www.thyssenkrupp-infrastructure.com.au
TKIF
.RE
V.1.
0.10
.8.2
017