material handling machine

7/30/2019 material handling machine

1/12

MATERIAL HANDLINGMACHINE

State-o-the-art technologies and unsurpassed

quality achieve a signicant increase in eciency

Higher engine output, combined with Stage IIIB/Tier 4i

emission standards compliance results in considerably

lower emissions and uel consumption

Intelligent cockpit design and a user-riendly

operator inormation system

Closed swing circuit

Hose rupture valves with regeneration on the lit and stick

cylinders or uel-ecient work

Operating weight 43.5 t 48.8 t

Engine output 190 kW

Reach Up to 18 m

Technical specifcations

Unique eatures

MHL360 E


2/1202

More power, lower uel consumption and that is

just the beginning: The new MHL360 E raises the bar

in the eld o cutting-edge scrap handling technology

with an even more sophisticated hydraulic system,

energy recovery, and a highly comortable cockpit

than previous models.

With its combination o power and reduced

emissions, as well as a hydraulic system that is both

powerul and sensitive at the same time,

the machine makes it possible to complete

even the most challenging material

handling tasks smoothly and

eciently.

SETTING NEW STANDARDSIN PERFORMANCEThe new MHL360 E

With an operating weight o 43.5 48.8 tonnes and a reach

o up to 18 m, the MHL360 E is a veritable scrap handling

powerhouse

Ideal or use at ports

A new hydraulic system design provides improved handling

capacity and eciency

Excellent stability thanks to a wide undercarriage base and

reinorced steel structure

BlueEVOLUTION technology means the MHL360 E is

ready or todays strict emission standards


3/12

YOUR HIGH-SPECWORK STATION

The MHL360 E operator control environment sets new standards in ergonomics

and comort. Even on the toughest jobs, our exclusive new generation oair-cushioned driver seats make this a good place to work. Intuitive joystick

control, a multi-unction button and keys or direct access to individual machine

unctions all make machine operation simple. All the relevant inormation

is clearly presented to the driver on a high-resolution, high-contrast display

screen. Structural saety has also been improved by strengthening the

protective steel cab structure to meet the latest EU Machinery Directive. The

driver is assisted by a rear-view camera (tted as standard), which provides an

excellent overview o the region behind the machine.

Reducing the workload. Relieving the stress.

Comortable interior equipment drivers seat design based

on latest ergonomics research

Intuitive machine controls simple-to-operate joystick,direct access to key unctions

Everything in view job-relevant inormation clearly

displayed on the central highres, highcontrast WVGA colour

display screen, with anti-glare shield tted as standard

Simple start/stop button (operates when ignition

switched on)

Improved eld o view and an even better view to the rear

when reversing or perorming complex manoeuvres thanks

to the integral rear-view camera, tted as standard

The whole cab concept is designed to support the driver and

lighten his load, and promote a comortable and productive

environment

Ergonomically designed, well

planned interior. Aided by the colour

display and the operator console, the

driver can easily control every majorunction rom the quiet comort o

his seat in the centre o the sound-

prooed cab

Standard equipment: the rear-view

camera provides a wide-angle view

o the area behind the machine

03


4/12

FASTER AND MORE

PRECISE THAN BEFORE

The machines sophisticatedhydraulic system is yet anotherTerex Fuchs highlight

The new hydraulic system design o the MHL360 E

provides even greater power and handling eciency

than beore. The use o separate circuit systems

means that the swiveling unit can be orceully started

and stopped without this having an impact on the

rest o the hydraulic system. In addition, it makes it

possible to perorm simultaneous swiveling and liting

maneuvers at high speeds with utmost precision even when handling large loads. The energy

recovery system in the hydraulic system is also an

innovation worth mentioning: When the superstructure

retards, the braking energy is ed back into the main

pump. Moreover, standard hose rupture valves with

regeneration helps ensure that the system requires

lower pump delivery rates, saving additional energy

in the process. These eatures not only reduce the

load on the engine, but also increase the machines

handling capacity up to 20% compared to the D-series

while maintaining the same levels o uel consumption.

The new MHL360 E eatures a highly ecient cooling system:

Advanced fow design, sel-regulating an drive, and thermally

insulated cooling systems provide outstanding cooling

perormance even under adverse conditions. Maintenance is

easier by design: Special access steps, large standing platorms

improve accessibility to all components, and a clearly-arranged

electrical system all help reduce service complexity04


5/12

PERFORMANCE UP,

EMISSIONS DOWNBlueEVOLUTION: The future generation stronger, quieter and cleaner than everEvolution means a continuous development o thegood to the even better. Terex has employed this

philosophy on our Terex Fuchs material handlers

rom the beginning, making us the innovation leader

in this market. The driving orce o these eorts is

our aim to provide the most modern technologies

and the best quality to you, our customer.

BlueEVOLUTION represents our latest step orward,

an all-embracing intelligent set o energy-related

measures harmonizing, perormance, resourcesaving, and operating costs.

Eciency and innovation are at the heart o

BlueEVOLUTION. The new MHL360 E has been

equipped with a more powerul turbo-diesel engine,

which not only boasts an impressive increase

in output, but also uses signicantly less uel

protecting the environment and reducing your costs

at the same time. The engines high-perormance

cooling unit keeps the engine at the ideal

temperature level, and thus increases its eciency.

The engine works in harmony with our load sensinghydraulic system, which provides the power you

need on demand, but doesnt waste uel generating

excess hydraulic fow. The complete package oers

a uture-oriented solution or perormance-oriented

material handling businesses with a strong sense o

responsibility who are already thinking o tomorrow

today.

Burner Fuel supply

Diesel

particle lter

air

pump

A powerul new heart beats

quietly inside the

Terex Fuchs MHL360 E:

a 6-cylinder engine at the

cutting edge o technology

a great platorm or

ecient energy use. Through

BlueEVOLUTION, were not

just helping your business,

but also this blue planet weall live on

The Terex Fuchs MHL360 E machine with BlueEVOLUTION

technology meets strict TIER4i/II IB emission limits

Despite systematically reducing emission levels, engine power

has been increased to 190 kW

Low uel consumption puts the brakes on operating costs

caused by todays high oil prices

Intelligent engine management and a high-perormance cooling

system protects against overloading and deliver real benets in

eciency

05


6/1206

TECHNICAL DATAOPERATING WEIGHTWITHOUT ATTACHMENTS

MHL360 Series E 43.5 t - 48.8 t

Manuacturer and model Deut z 7.8 L6 4V

Design 6-cylinder inline

Engine control EMR IV

Type 4-stroke diesel, common rail direct injection, turbocharger,

controlled exhaust gas recirculation, diesel particulate flter with

automatic regeneration

Engine output 190 kW

Nominal speed 2000 min-1

Displacement 7.8 l

Cooling system Combi-cool er (coolant/charge air) with an speed control

system; optional reversing unction

Emission standard Stage I II B / EPA Tier 4 interim

Air f lter des ign Two-stage flter with saety cartr idge and pre-separator with

discharge valve

Usable tank capacity 653 l

DIESEL ENGINE

ELECTRICAL SYSTEMGenerator 28 V / 100 A

Operating voltage 24 V

Battery 2 x 12 V / 110 Ah / 750 A (in accordance with EN)

Lighting set 2 x H3 headlamps, turn indicators and tail lights

Option20 kW or 30 kW DC generator with controls and insulationmonitoring, driven by V-belt direct rom diesel engine

TRAVEL DRIVEHydrostatic travel drive via infnitely variable axial piston motor

with directly mounted travel brake valve, two-speed manual

gearshit, 4-wheel drive

Maximum speed, 1st gear max. 5 km/h

Maximum speed, 2nd gear max. 15 km/h

Gradeability max. 30 %

Turning radius 8.0 m

SWING DRIVESwing gear Internally toothed double-row ball ring gear

Drive 3-stage planetary gear with integrated multi-disc brake

Upper carriage swing speed 0 - 6 min-1 infnitely variable

Swing brake Electrically operated

Max. pivot torque 91 kNm

UNDERCARRIAGEFront axle Planetary drive axle with integrated drum brake, rigidly mounted,

max. steering angle 27

Rear axle Oscillating planetary drive rear axle with integrated drum brake

and selectable oscillating axle lock

Stabilizers 4-point stabilizersTires Solid rubber, 8-ply 12.00 - 24

BRAKE SYSTEMService brake Hydraulic single-cir cuit braking system acti ng on al l our wheel

pairs

Parking brake Electrically operated disc brake on transmi ssion, acting on both

ront and rear axles

REXROTH mobile hydraulic system with load limit control and

uel-saving power demand control; closed swing circuit; hose

rupture valves with regeneration on the lit and stick cylindersor uel-efcient work

Hydraulic oil flter Integral return flter in oil tank or work hydraulics, with 3000

operating hrs service interval; oil fltration on closed swing

circuit

Max. Pump capaci ty 2 x 280 l/min & 1 x 140 l/min (or swing operat ion)

Max. Operating pressure 320/360 bar

Hydraulic oil tank 520 l usable tank capacity

HYDRAULIC SYSTEM

Liting gear Elasti cal ly suppor ted, infni tely variable hydraul ically elevat able

with max. eye level o 6.10m; independent orward movement

o up to 2.20 m; Sound-deadened; heat-insulated windows or

optimum view; Sound-insulated; heat-insulating glass windows

or optimum view feld; windshield with pull-down sunblind that

slides under the cab roo; viewing window on cab roo; sliding

window in cab door; height and tilt-adjustable steering column

Heating Infnitely variable heating with 3-speed an, 6 adjustable

deroster nozzles (hot water system)

Operator s seat A ir-cush ioned comort-seat wi th in tegra ted headrest, sa ety bel t

and lumbar support, seat heating with integrated A/C unction

optional. Comortable operation with multi-purpose adjustment

options or seat position, seat inclination, and seat cushion

placement in relation to armrests and pilot control units

Monitoring Ergonomic layout; anti-glare instrumentation. Multiunctiondisplay, automatic monitoring and recording o abnormal

operating conditions (including all hydraulic oil flters, hydraulic

oil temperature (cold/hot) - coolant temperature and charge

air temperature - condition o cooling system, diesel particulate

flter load), visual and audible warning indication with shutdown

o pilot controls/engine power reduction. Diagnosis o individual

sensors possible via the multi-unction display. Rear view camera

Air conditioning Automatic

Acoustic power level LW(A)

= 104 dB(A) (guaranteed) in accordance

with directive 2000/14 EC

OPERATOR CAB

OFFICIAL HOMOLOGATIONCertifed in accordance with CE regulations


7/1207

STANDARD OPTION

Exhaust gas turbocharger Charge air cooling Direct electronic uel injection/common rail Automatic idle Engine preheating Engine diagnostics interace System-controlled an drive with an speed monitoring

MHL360 EEQUIPMENTENGINE STANDARD OPTION

All-wheel drive with dierential Drum brakes Rear axle oscillating lock 2-speed powershit transmission 4-point stabilizers Stabilizer cylinders with integrated two-way check valves Piston rod protection on stabilizer cylinders Stabilizer plates 510 x 665 4-point stabilizers, individually controllable Dozer blade with plastic or Hardox edge (in addition to 4-point stabilizers) Tool box Special paint (customer paint work)

UNDERCARRIAGE

STANDARD OPTION

Separate cooling systems (combi-cooler or engine and hydraulic oil

cooler)

Cooling system an speeds controlled by operating parameters Fan drive reversing unction Lockable maintenance hatches, with gas struts Automatic central lubrication system Rear view camera Reversing alarm Electric reuelling pump Lighting protection Special paint (customer paint work)

UPPER CARRIAGE

STANDARD OPTION

Cab system horizontally and vertically adjustable Saety glass Hinged windscreen Sliding window in cab door Glazed roo panel

Hinged roo opening Reinorced glass (windscreen and roo panel) Windscreen washer system Windshield washer system (lower portion o windshield) Air-cushioned operator seat with headrest, seatbelt, and lumbar support Seat heating with integrated A/C unction Steering column, height and tilt adjustable Automatic air conditioning system Independent heating system Multi-unction display Document clip

Protective grilles to ront and roo 12V transormer Radio CD player 12V power outlet Fire extinguisher, dry powder Rotating beacon

CAB

STANDARD OPTION

20 kW DC generator with controls and insulation monitoring 30 kW DC generator with controls and insulation monitoring Close proximity range limiter or dipperstick Coolant and hydraulic oil level monitoring system Filter system or attachments Hose rupture protection or lit cylinder Hose rupture protection or dipperstick cylinder Overload warning device Quick coupling on dipperstick Cut-o ball valve on dipperstick Dipperstick impact protection Cyclonic pre-separator or air-flter Hydraulic oil preheating Float switch Joystick steering Lubrication o the grab suspension by central lubrication system H3 headlamps H3 worklights on boom and dipperstick (up to 4) Xenon worklights on boom and dipperstick (up to 4) Front-mounted Xenon worklights (up to 2) Xenon worklights on cab roo (up to 4)

EQUIPMENT

Further optional equipment on request


8/12

MHL360 E 195 3315

540

3200

5980

1935 3000

1595

2900

3555

290

615

1700

2940

3000

4520

5030

A

B C

D

E

2010

195

1900

08

DIMENSIONS

TRANSPORT DIMENSIONS MHL360 E

Dimensions Reach 16.5 m Reach 18.0 m Reach 18.0 m cranked

A 13,830 mm 14,615 mm 14,610 mm

B 6,375 mm 6,400 mm 5,915 mm

C 1,715 mm 1,715 mm 1,715 mm

D 3,555 mm/3,750 mm* 3,555 mm/3,750 mm* 3,555 mm/3,750 mm*

E 3,400 mm 3,700 mm 3,750 mm

* with a protective mesh or the cab roo

LOADING SYSTEM WITH DIPPERSTICK MHL360 E

Components 16.5 m 18.0 m 18.0 m cranked

Straight boom 8.9 m Straight boom 9.7 m Cranked boom 9.7 m Dipperstick 7.0 m Dipperstick 7.8 m

Loading system 18 m cranked: Undercarriage equipped with dozer blade, rotated by 180

1900Avg. center of gravi tyin transport position


9/1209

WORKING RANGES/LIFTING CAPACITIESREACH 18 M WITH DIPPERSTICK

The lit capacity values are stated in metric tons (t). The pump pressure is 360 bar. In accordance with

ISO 10567 the lit capacity values represents 75% o the static tipping loads or 87% o the hydraulic

liting orce (marked ). On solid and l evel ground the values apply to a swing range o 360. The (...)

values apply in the longitudinal direction o the undercarriage. The values or not supported only applyvia the steering axle or the locked oscillating axle. The weights o the attached load hoisting equipment

(grab, load hook, etc.) must be deducted rom the lit capacity values. The working load o the liting

devise must be observed. In accordance with the EN 474-5 or object handling application hose rupture

valves on the boom and stick cylinders, an overload warning device and the lit capacity table in the cab

are required. For object handling application the machine has to be supported on a level ground.

Loading system Boom 9.7 m,

Dipperstick 7.8 m,

Cactus grab 0,8 m3 open

RECOMMENDED ATTACHMENTSTerex Fuchs cactus grab 0.6 m3 Open or hal-closed shells

Terex Fuchs cactus grab 0.8 m3 Open or hal-closed shells

Terex Fuchs MAGNETIC PLATE MP 1350 dia. = 1350 mm with magnet system 30 kW

Clamshell grab 1.4 m3 Loose goods density up to 1,600 kg/m3

Clamshell grab 2.0 m3 Loose goods density up to 800 kg/m3

Lit hooks 20 t

MHL360 E20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 3Reach in m

Height

m

Undercarriage

stabilisation 6 7.5

9 10.5 12 13.5 15 16.5 18

15Without stabilizers (8.8) (6.8) (5.3)

With 4-pt stabilizers 8.8 (8.8) 7.9 (7.9) 6.3 (6.3)

13.5Without stabilizers (7.0) (5.5) (4.3)


12Without stabilizers (7.0) (5.5) (4.4) (3.5)

With 4-pt stabilizers 7.7 (7.7) 6.9 (6.9) 6.3 (6.3) 5.1 (5.1)

10.5Without stabilizers (6.9) (5.4) (4.4) (3.5)


9Without stabilizers (8.8) (6.7) (5.3) (4.3) (3.5) (2.8)

With 4-pt stabilizers 9.0 (9.0) 7.9 (7.9) 7.0 (7.0) 6.3 (6.3) 5.4 (5.7) 4.5 (5.1)

7.5Without stabilizers (8.4) (6.5) (5.2) (4.2) (3.4) (2.8)


6Without stabilizers (10.7) (8.0) (6.2) (4.9) (4.0) (3.3) (2.7)

With 4-pt stabilizers 11.8 (11.8) 9.8 (9.8) 8.4 (8.4) 7.3 (7.3) 6.2 (6.5) 5.2 (5.7) 4.4 (5.1)

4.5Without stabilizers (13.7) (9.8) (7.4) (5.8) (4.7) (3.9) (3.2) (2.7) (2.2)

With 4-pt stabilizers 16.5 (16.5) 12.6 (12.6) 10.3 (10.3) 8.6 (8.6) 7.3 (7.4) 6.0 (6.5) 5.2 (5.7) 4.4 (5.0) 3.7 (4.2)

3Without stabilizers (12.0) (8.8) (6.8) (5.4) (4.4) (3.7) (3.1) (2.6) (2.2)


1 .5Without stabilizers (9.1) (8.0) (6.3) (5.1) (4.2) (3.5) (3.0) (2.5) (2.2)




- 1 .5Without stabilizers (6.9) (7.1) (5.6) (4.6) (3.8) (3.2) (2.8) (2.4)

With 4-pt stabilizers 6.9 (6.9) 12.1 (12.1) 9.4 (9.9) 7.6 (8.2) 6.4 (6.9) 5.4 (5.8) 4.7 (4.9) 3.9 (3.9)

- 3Without stabilizers (7.5) (6.9) (5.4) (4.4) (3.7) (3.2) (2.7) (2.4)


- 4 .5Without stabilizers (6.9) (5.4) (4.4) (3.7) (3.1) (2.7)


- 6Without stabilizers (4.4) (3.7)

With 4-pt stabilizers 5.0 (5.0) 4.1 (4.1)

Reach m

2,7Without stabilizers (2.1)

With 4-pt stabilizers 3.6 (3.8)

max. reach 18.2 m


10/1210

WORKING RANGES/LIFTING CAPACITIESREACH 16.5 M WITH DIPPERSTICK

Loading system Boom 8.9 m,

Dipperstick 7.0 m,








Lit hooks 20 t

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 3Reach in m



liting orce (marked ). On solid and level ground the values apply to a swing range o 360. The (...)

values apply in the longitudinal direction o the undercarriage. The values or not supported only apply

via the steering axle or the locked oscillating axle. The weights o the attached load hoisting equipment





Height

m

Undercarriage

stabilisation 6 7.5

9 10.5 12 13.5 15 16.5

15Without stabilizers (8.4) (5.8)




12Without stabilizers (8.8) (6.8) (5.3) (4.2)


10.5Without stabilizers (8.8) (6.8) (5.3) (4.3)


9Without stabilizers (8.6) (6.7) (5.3) (4.3) (3.4)

With 4-pt stabilizers 9.4 (9.4) 8.3 (8.3) 7.5 (7.5) 6.4 (6.7) 5.3 (5.6)

7.5Without stabilizers (11.2) (8.4) (6.5) (5.2) (4.2) (3.4)


6Without stabilizers (14.8) (10.6) (8.0) (6.2) (5.0) (4.1) (3.4)


4.5Without stabilizers (13.8) (9.9) (7.5) (5.9) (4.8) (3.9) (3.3) (2.7)


3Without stabilizers (12.3) (9.0) (7.0) (5.6) (4.6) (3.8) (3.2) (2.7)


1 .5Without stabilizers (11.1) (8.3) (6.5) (5.3) (4.4) (3.7) (3.1) (2.7)




- 1 .5Without stabilizers (8.9) (7.5) (6.0) (4.9) (4.1) (3.5) (3.0)


- 3Without stabilizers (9.6) (7.4) (5.8) (4.8) (4.0) (3.4) (3.0)


- 4 .5Without stabilizers (7.5) (5.8) (4.8) (4.0)


Reach m

2.7Without stabilizers (2 .6 )

With 4-pt stabilizers 4 .0 (4 . 0)

max. reach 16.7 m


11/1211

MHL360 E

REACH 18 M CRANKEDLoading system Cranked Boom 9.7 m,

Dipperstick 7.8 m,







Lit hooks 20 t

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 3Reach in m



liting orce (marked ). On solid and l evel ground the values apply to a swing range o 360. The (...)

values apply in the longitudinal direction o the undercarriage. The values or not supported only apply

via the steering axle or the locked oscillating axle. The weights o the attached load hoisting equipment





Height

m

Undercarriage

stabilisation 6 7.5

9 10.5 12 13.5 15 16.5 18

15Without stabilizers (6.5) (5.3)


13.5Without stabilizers (5.4) (4.2)


12Without stabilizers (5.5) (4.3) (3.4)




9Without stabilizers (6.6) (5.3) (4.2) (3.4) (2.7)


7.5Without stabilizers (6.5) (5.1) (4.1) (3.3) (2.7)


6Without stabilizers (7.9) (6.1) (4.9) (3.9) (3.2) (2.7)


4.5Without stabilizers (13.7) (9.7) (7.3) (5.7) (4.6) (3.8) (3.1) (2.6) (2.1)




1 .5Without stabilizers (10.4) (7.8) (6.1) (4.9) (4.1) (3.4) (2.8) (2.4) (2.1)




- 1 .5Without stabilizers (7.6) (6.8) (5.4) (4.4) (3.7) (3.1) (2.7) (2.3)


- 3Without stabilizers (7.9) (6.6) (5.2) (4.2) (3.6) (3.0) (2.6) (2.3)


- 4 .5Without stabilizers (8.6) (6.6) (5.1) (4.2) (3.5) (3.0) (2.6)


- 6Without stabilizers (9.3) (6.7) (5.2) (4.2) (3.5) (3.0) (2.7)


Reach m

2,7Without stabilizers (2.0)

With 4-pt stabilizers 3.5 (5.5)

max. reach 18.1 m


12/12

www.terex-uchs.com

Product range/Standard machines

Powerul perormance with low uel consumption

levels, extreme loading capacities, high speeds:

These characteristics make the Terex

FuchsMHL360 E mobile material handling machine stand

out among the competition and show how the units

new generation has been ne-tuned even urther

in order to perectly meet our customers needs.

The ully reengineered hydraulic system design

in particular provides previously inconceivable

perormance levels in terms o eciency and speed,

perorming day ater day o demanding work. And

it goes without saying that operators will be able

to control this powerhouse with utmost saety and

precision rom the units high-comort cab, which

has numerous eatures designed to provide a

comortable and ergonomic working environment.

MHL360 E

Valid rom: Juli 2012. Product specifcations and prices are subject to change without notice or obligation. The photographs and/or drawings containedin this document are or illustrative purposes only. Please reer to the appropriate Operators Manual or instructions on the proper use o this equipment.Failure to ollow the appropriate Operators Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. Theonly warranty applicable to our equipment is the standard written warranty applicable to the particular product. Terex makes no other warranty, expressed orimplied. Products and services listed may be trademarks, service marks or trading names o Terex Corporation and/or its subsidiaries in the USA and other

countries. All rights reserved. Terex is a registered trademark o Terex Corporation in the United States o America and in many other countries. 2012Terex Corporation.

A history of great ideas since 1888

Ever since the business was ounded in 1888, the

Fuchs name has signied a wealth o ideas and

innovation. Whether developing the legendary

Fuchs 301 cable excavator in 1957 or patenting theelevatable cab in 1975, pioneering technical advances

have shaped the brands history right up to the

present day, and helped Terex Fuchs machines to

win their reputation or top quality workmanship and

endurance. Terex Fuchs ocuses its resources on

clearly dened areas o application, oering high-

perormance materials handlers to the recycling,

scrap handling, port and timber industries. This

concentration on core sectors delivers important user

benets: instead o standard o-the-shel products,

we provide tailored, highly customisable machine

solutions, which can be adapted to the precise needs

o our customers.

MHL320 MHL331 MHL335 MHL340 MHL340 FQC MHL350 MHL350 FQC MHL360 MHL380

85 kW 114 kW 114 kW 128 kW 128 kW 160 kW 160 kW 190 kW 273 kW

8.2-10.4 m 10.7-12.0 m 10.7-12.0 m 12.2-13.7 m 11.0-11.2 m 14.0-16.0 m 12.5-13.0 m 16.5-18.0 m 18.5-21.0 m

17.8-19.0 t 22.0-23.5 t 23.5-25.0 t 27.5-29.0 t 28.5-31.3 t 32.0-35.5 t 32.0-37.5 t 43.5-48.8 t 66.0-67.0 t

0.4-0.6 m3 0.4-0.6 m3 0.4-0.8 m3 0.4-0.8 m3Attachmentson request

0.6-0.8 m3Attachmentson request

0.6-1.0 m3 1.0-1.4 m3

MHL454 MHL474

176 kW 213 kW

9.8-10.85 m 11.15 m

31.0-32.5 t 41.5-44.0 t

1.7-2.5 m2 2.0-4.0 m2

material handling machine

Documents

Transcript of material handling machine