Training Juniper JNCIA-JNCIS-JNCIP, The Road-Map:1. Introduction- Command Line interface Review- Initial System configuration2. Protocol Static router- understanding static route- configuring static route3. logical-router- understanding logical-router- configuring logical-router4. Routing Policy- Forming a Policy- Applying routing-policies5. Firewall and Filter- Implementing Firewall Filter- Rate Policing6. Protocol RIP- Configuring RIP- Applying routing-policies7. Protocol OSPF- Multi Area Configuration- OSPF Authentication- OSPF Network Type- Configure OSPF routing policy8. Configuring IS-IS- Multi-level IS-IS configuration- IS-IS Network Type- IS-IS Authentication- IS-IS Policy9. Configuring BGPa. IBGP Configuration and Testing- Initial IBGP peering- IBGP Authentication- IBGP Policyb. EBGP Configuration and Testing- Initial EBGP Peering- EBGP Authentication- EBGP Policy10. Configuring MPLS- LDP Signal- RSVP Signal- Traffic Protection- Traffic Engineering