Matco Tools Sales Flyer #6

#6

$431.95

“”

“ ”TONS Of NEW

HEAVY DUTY TOOLS

pg. 6-7

TOP RATED TOOL

™

miraculous time saver

March 16 – April 7, 2013

PR 12, 16, 20

AC71475

This kit does it all. Fabricates 45°, push connect, GM fuel, and metric ISO bubble flares

Get the job done quickly. The hand-held hydraulic pump allows the user to easily fabricate flares in both bench and on-car applications

Flare sizes include: – 45°: 3/16", 1/4", 5/16" and 3/8", and 1/2" – Push connect: 1/4", 5/16" and 3/8" – GM fuel: 5/16", 3/8" and 1/2" – Metric ISO bubble: 4.75mm, 6mm, 8mm, 10mm

Professional Mechanic from Cleveland, OH, USA

I used to fear doing brake lines, or disconnecting tranny lines from the radiator, because of fear of twisting the line. Just cut it, and make a new flare right there in the car. No problem.

Cuts job time in half, if not more and you'll probably make your money back in as little

as one or two jobs with it. Love this tool.

COMPLETE UNIVERSAL HYDRAULIC fLARING TOOL KIT

Save over $85

$122.50

$66.60

$102.95

$17.50

2 www.matcotools.com

pr

UPO4MB

U-NOTCH UPHOLSTERY TOOL ∙ Allows easy removal of smaller size moldings, tacks and clips where clearance is a problem

MHFS6

6 PIECE MINI HANDLE fILE SET ∙ Knurled carbon tool steel shafts with rust preventive coating

∙ Chrome plated shafts with black oxide tip treatment

∙ Inludes: mini hand file, mini warding file, mini half round file, mini square file, mini round file and mini slim taper triangular file

SPD4KA

4 PIECE DRIfT PUNCH SET ∙ Manufactured from high-grade, shock resistant tool steel and heat-treated for the right balance of hardness, strength and durability

∙ Set includes: 8" drift punch - 3/8" x 5/32", 10" drift punch - 1/2" x 3/16", 12" drift punch - 5/8" x 1/4", 12" drift punch - 5/8" x 5/16"

SMLP7

7 PIECE LOCKING PLIERS SET ∙ Contains the most popular locking pliers as a single offering

∙ Unique material combination provides performance and quality

∙ Includes: One C-clamp with regular tips, curved jaw pliers with and without cutters and needle nose locking pliers

∙ Includes length sizes: 5", 6", 9", 10", 11"

MUC12LED

12V CORDLESS INfINIUM LED fLASHLIGHT ∙ 3W LED light provides focused beam ∙ 136 lumen rating provides a bright beam in poorly lit shop environments

∙ Pivoting head allows user to adjust head angle to the work area

∙ Magnetic clip allows hands free use ∙ **Battery and charger not included

SE345

SILVER EAGLE .45 HP RIGHT ANGLE DIE GRINDER ∙ .45 HP motor makes this mini right angle tool the most powerful on the market

∙ Ergonomic grip design gives tool great feel ∙ Built-in regulator for speed control ∙ Safety lever type throttle to prevent accidental start-ups

∙ Front exhaust

MS15

MECHANIC'S SEAT WITH DRAWERS ∙ 300 lbs. capacity ∙ Four 3" polyurethane wheels with full bearing casters

∙ Powder coat finish ∙ Fully upholstered padded seat ∙ 171⁄8" - 215⁄8" adjustable height ∙ Two 13½"w X 7"d X 1¾"h drawers

Save over $17$98.50

Save over 15%

Save over $10

$107.95

Save over $20$148.95

Save over $20

TAKE A SEAT

GETBUSY

3

MATS1430

MATS2512

MATS412

MATS416

MATS824

EX

CL U S I V

E

MA T C O

$159.95

$54.95

$59.95

$79.95

$109.95

pr

14 LBS. / 30"

2.5 LBS. / 12"Heat treated head (52 to 56 HRC)

Meets ANSI specifications

Matco’s new

4 LBS. / 12"

4 LBS. / 16"

8 LBS. / 24"

Indestructible handle technology outlasts wood & fiberglass handle hammers by thousands of overstrikes

Rubber handle greatly reduces vibration

Spring steel bars run through the handle giving it the strength to resist overstrikes

Steel locking plate in head eliminates head getting

loose or coming apart

INDESTRUCTIBLEline of sledge HaMMeRs

SSC100

DUAL EDGE STRIKING SCRAPER SET ∙ Heavy duty dual bevel striking scrapers with extra thick, heat treated stainless steel blades that extends through handle to striking surface

∙ Can be struck on the side of blade to split seams and spot welds

∙ Ergonomic grip handle with thumb stop

∙ Set includes: 1/2", 3/4" and 1-1/4" scrapers

ExTRA THICK stainless

steel blades



$127.75

™

$104.95

pr

MSBT15

SERPENTINE BELT WRENCH SET ∙ Ultimate set to service a wide range of vehicles with spring-loaded tensioner pulley

∙ Easy access with both crows foot and socket sizes

MTL500

MATCO PROfESSIONAL TIMING LIGHT ∙ Four function digital readout and easy-to-read backlit LCD

∙ Tachometer: 249-9,990 RPM ∙ Dwell: 0°-180°, 2-12 cylinders ∙ Switches from 2-cycle to 4-cycle ∙ Built in LED flashlight ∙ Includes molded plastic storage case

TTK12XL

12 PIECE ExTRA-LONG TERMINAL TOOL KIT ∙ Fits most GM, American Motors and some imports computer connectors and terminals

∙ Dual durometer ergonomic handle made from TPE (Thermal Plastic Elastomer) resists acid fluids and solvents

WT330A

CRIMPING TOOL ∙ Four versatile crimping dies for 26-10 AWG insulated terminals

∙ Separate crimping dies for non-insulated terminals & ignition terminals

∙ Five common size bolt cutters cuts 6-32, 8-32, 10-32, 10-24 and 4-40 bolts

∙ Strips stranded wire in 26-10 AWG sizes and solid wire in 22-8 AWG sizes

∙ Wire stripper can also be used as a wire gauge

DM115

DIGITAL MULTIMETER ∙ Checks resistance, continuity, frequency, capacitance & diode test

∙ Measures 10 A continuous ∙ Large white LED backlight ∙ Compact ergonomic design

Q3MEC2T

2 TON fOLDABLE ENGINE CRANE ∙ Heavy duty welded construction with rugged reinforced tubular steel

∙ Special 8 ton hydraulic long rams are equipped with a patented built-in by-pass mechanism

∙ Long rams have internal load-limiting device to protect crane and user from overload

speedy access even in the most compact areas of today’s smaller engines with the ratcheting gearwrench with slim head

tRue RMs foR accuRate MeasuReMents

Save $19$192.95


Save over 10%$25.95

Save $29$183.95

fOLDS-UP

5

$194.95

$213.95

$35

EX

CL U S I V

E

MA T C O

$19.60

$49.95

$34.95

$360.95$50

24" x 36"

NO HAND PUMP NEEDEDpr

ST20610

IN LINE SPARK TESTER ∙ Tester quickly diagnoses ignition systems including distributor-less ignitions

∙ With the engine running, the bulb mirrors the ignition spark

FC2436

fENDER COVER ∙ Non absorbent, continuous sheet of nylon reinforced foam

∙ Seamless construction conforms to the fender of any vehicle

ETWB100A

3/8" DRIVE ELECTRONIC TORQUE WRENCH ∙ +/- 2% clockwise accuracy, +/- 3% counterclockwise accuracy from 10% - 100% of 100 ft. lbs. capacity

∙ Four easy to understand and use function buttons with buzzer and color coded lights to alert when target torque is achieved

∙ 60 tooth fine tooth mechanism requires a small 6° swing arc

∙ Easy to read lighted LED screen ∙ Streamlined TearDrop ratchet head for optimum access in the most compact areas

AST3462

#10 POLYDRIVE HEAD BOLT SOCKET ∙ 6 point polydrive headbolt driver ∙ 155mm long with 1/2" drive holder ∙ Used on most VW and Audi engines 1988 and newer

BPR65

fORD BROKEN PLUG REMOVER ∙ Removes broken spark plugs from 2004 and newer Ford Triton 3 valve per cylinder engines

∙ Set includes a unique porcelain pusher tool and a tapered left-hand thread remover for removing the broken spark plug without leaving the porcelain in the engine cylinder

TH212

POWER STEER fLUID VACUUM PUMP ∙ Easy to use, 5-minute alternative solution to extract air from power steering lines - no hand pump needed

∙ Rubber plug allows for easy attachment to the vehicle

SS3CFMP

3.0 CfM DEEP VACUUM PUMP ∙ 3.0 cfm deep vacuum pump ∙ High volume fan provides cool air to pump and motor

∙ Vapor discharge / oil fill port is easily removable and contains internal check valve to prevent oil blow out

∙ Includes "T" adaptor for 1/4" and 1/2" acme ports

∙ Non-slip cushioned handle

SAE164 ∙ Low profile design allows for use on or off of the vehicle

∙ Designed to be used with a ratchet or wrench ∙ Double clamp and he screw design to keep tubing locked in to position

IN-LINE sae flaRe tool Kit

QuicKly conveRts units autoMatically

Save over 15%$14.95

Save over 10%$112.50

SAVENEARLY

SAVENEARLY

simple air hose attachment to bleed air from the power steering fluid lines

Heavy DUTyHeavy DUTy

$40.50$49.50

10%


pr

MST5025

DEf REfRACTOMETER SCR AND EPA 2010 ∙ The refractometer is a portable precision optical instrument used for measuring the diesel exhaust fluid concentration

∙ When a liquid sample is placed on the prism the light passing through it is bent and the more concentrated the liquid the more the light will bend

∙ The refractometer contains a reticle or scale that is enlarged through the eyepiece to measure this light and the values on the scale have been established to evaluate the DEF condition

∙ EPA regulations require all diesel engines manufactured on or after January 1 2010 to meet lowered NOx emissions standards

MST5190

HEAVY DUTY U-JOINT PULLER ∙ The ideal tool for disassembling drivelines ∙ May be used with up to a 1" impact wrench ∙ Will not damage the drive shaft, yoke, bearing cups, or joints

∙ Fits practically all Class 7 and 8 trucks

MST5728

TIRE BEAD BREAKER ∙ Unique head is designed to provide a large striking area for all angles, while providing the mass needed to break the tire bead

∙ This design puts the force exactly where it’s required and eliminates the possibility of accidentally hitting the wheel, problems typically encountered while using larger swing hammer style bead breakers

∙ Excellent for damaged tires or tires with weak sidewalls where conventional bead breakers will not work

∙ C-Shaped head allows for multiple striking angles

MST6914 ∙ Fits Davco Diesel filter models, 232-233-234

MST6915 ∙ Fits Davco Diesel filter models 382 & 384

MST7490

SPICER U-JOINT PUSH-PULLER ∙ Removes frozen stubborn U-joints with the help of a 1/2" impact wrench

∙ Compact size can be used a different angles enabling the technician to remove the u-joint no matter how limited the access may be

∙ Works on most Dana, Spicer, and Meritor U-joints except Spicer’s Life series model SPL250X

Quickly and easily removes sealed U-joint cups without the need for hammering or heat

DAVCO fILTER WRENCHES ∙ Opens the vent cap ∙ For Caterpillar, Cummins, Detroit Diesel International, Mack, Mercedes-Benz, Volvo, and other engines

∙ Durable stainless steel construction is laser cut to ensure the proper grip

SAVE

Save $12$107.95

Save $37$332.95

Save $14$125.95

Save $26$233.95

7

$404.50

$163.95

™

$119.95

™

pr

MST5055

SLACK ADJUSTER PULLER ∙ Unique durable design will remove frozen corroded slack adjusters from the s-cam found on HD vehicle brakes

∙ Will not damage components

MST7069A

HEAVY DUTY TRUCK BRAKE SPRING PLIERS ∙ Specially designed pliers for servicing heavy duty brakes

∙ Long 26¼" handles provide extra leverage for the toughest jobs

∙ Large jaws designed to accommodate the largest brake shoes

MST7180

UNIVERSAL BEARING CUP INSTALLER ∙ Adjustable locking jaws install bearing cups on a wide variety of heavy duty truck axles

∙ Works on axles from 11,000 – 50,000 lb. capacity

∙ Used to install cups ranging in size from 3-5/8" O.D. to 6-1/2" O.D.

FIT550

MASTER fUEL PRESSURE TESTER KIT ∙ Kit includes more than 50 adapters, hoses and fittings to test most foreign and domestic fuel injection systems

∙ Large, easy to read, 3½" dual-scale gauge 0-100psi & 0-700 kPa with rubber boot and 48" hose. Also includes pressure relief and fuel discharge hose

∙ Quick release couplers and adapters to fit other fuel injection test kits

LT991

HOLLOW END LINE TAPS ∙ Hollow end line taps rethread female fittings without line removal

∙ Hollow end of tap slides over flared end of line easily rethreading female connector

∙ Use on A/C - Heavy Duty Brake Oil Trans and heater lines and coils

∙ 8 piece kit covers all popular sizes 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 27mm and 1-1/8"

AC99872A

INTELLIGENT DIGITAL GAUGE SET ∙ Database includes the refrigerant and oil capacities for over 1000 vehicles

∙ Displays Pressure, Vacuum, and Refrigerant Temperature

∙ Includes set of 3 - R134a 72" hoses ∙ Includes High and Low side R134a manual couplers

ACRX1

AC LEAK DETECTOR ∙ Microprocessor controlled circuit with advanced digital signal processing

∙ Six segment visual leak size indicator ∙ Detects all halogenated refrigerants

performs running, residual, rail and flow rate pressure tests.

FTMK48

fLEET TERMINAL MAINTENANCE KIT ∙ Clean and restore male and female electrical plow connectors used on minute mount and similar set ups

∙ Remove corrosion and increase harness life ∙ Applications: Western, Fisher, BOSS, Meyers, and more


Save $15$134.95

Save $38$341.95

Save over $30

Save over 10%$249.95

Save over $30

$187.95

Auto shut-off


SAVEOVER

$15

$189.50

SAVEOVER

$30

$292.95

$66.50

360°

BUST THAT

NUT

pr

S9GRCXL10

10 PIECE 90 TOOTH ExTRA LONG SAE COMBINATION RATCHETING WRENCH SET ∙ Includes sizes: 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"

SAUPM86R

1/4" DRIVE 8 PIECE METRIC 6 POINT UNIVERSAL IMPACT SOCKET SET ∙ Pinless design for longer socket life with less breakage ∙ 4 point contact spreads wrenching forces throughout the roundhead joint to increase durability

∙ 360° rotation gives easier access from any angle ∙ EZ on and EZ off provides the right fit on the gun everytime

∙ High-visibility markings are laser etched providing size information at a glance

∙ Includes sizes: 7mm, 8mm, 10mm – 15mm

B3UB

3/8" x 3/8" MALE UNIVERSAL JOINT ∙ S2 tool steel pin increases strength of universal joint

∙ Cold formed manufacturing increases overall socket strength

SE5PS

5 PIECE SILVER EAGLE PLIERS SET ∙ Includes slip joint pliers, linesman pliers, needle nose pliers, diagonal pliers and groove joint pliers

Double dipped cushioned handles for added comfort

Manufactured from Cr-V

steel for added

durability and

strength

& easy cuts

SUPER STRONG

COMfORTABLE

great grip

S9GRC8

8 PIECE 90 TOOTH SAE COMBINATION RATCHETING WRENCH SET ∙ Includes sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"

EXT

RA-

LON

G

∙ Loosen or tighten any 6pt, 12pt, spline, star, square and even up to 50% rounded off fasteners

∙ 90 teeth head ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 4° swing arc


Save over 10%$34.95

Save $18

9

$29.95

SAVEOVER

$80

$242.50

FREE!FREE!pr

A100A

10-120PSI INfLATOR GAUGE ∙ Straight-On tapered chuck inflator, with 12" hose

∙ Heavy chrome plated castings with protective sleeve over dial tube

∙ Solid brass bar is calibrated 10-120psi in 2psi increments

DILP10A

DIAL INDICATOR SET WITH PLIER ∙ Measures wear and runout on brakes and tires

∙ Dial range: 0 - 1.3" ∙ Flex arm with locking pliers

DRG04B

ELECTRONIC DIGITAL ROTOR GAUGE ∙ Range 0-5.5" / 0-140 mm ∙ Pointed anvil for measuring into grooves ∙ Arms are 3.5" deep for larger rotors ∙ Resolution: 0.0005" / 0.01mm ∙ Full stainless steel frame

SMCLM102T

10 PIECE METRIC 12 POINT LONG MODIfIED COMBINATION WRENCH SET ∙ 12° swing arc or less ∙ Increased torque without rounding fastener ∙ Reduced tip spread and increased hardness ∙ Opti-Torque Pro™ open end ∙ Slim head profile ∙ Professional beam ∙ Includes sizes: 10mm – 19mm

SR202

SAE STUD REMOVE/INSTALL KIT ∙ Unique design allows the removal and installation of studs without damaging the threads

∙ Each stud size uses one tool for removal and one tool for installation

∙ Includes hex key and blow mold case ∙ Fits the following SAE sizes: 5/16"x18, 5/16"x24, 3/8"x16, 3/8"x24, 7/16"x14

SHKLT7

7 PIECE LONG TORx HEx KEY T10-T40 ∙ High quality industrial grade professional tool

∙ Made with proprietary alloy steel heat treated for optimal strength and ductility with black finish to resist rust

∙ For driving TORX, TORX Plus, and Star recess fasteners

GET THIS

GRSP

RATCHETING SCREWDRIVER - PISTOL GRIPThe rugged design screwdriver allows for great force and user comfort

The handle swivels and locks at a 30° position for application of higher torque when necessary and locks at 180° for normal operation

Clockwise, counterclockwise, and non-ratcheting (fixed) driving modes

Spring-loaded cartridge style bit holder in handle stores six bits

SBIT29 29 PIECE RATCHETING WRENCH BIT SET

for both!

Only

$51.40

$44.35 Value

with the purchase of GRSP

Save 15%$54.50

Save $12$107.95

Save over $15$86.50

Save $11$91.95

Save 15%

LON

G

INDUSTRIAL M FRAME®

PLAINTIFF™

SQUARED

10

EYE

PR

OT

ECT

ION

www.matcotools.com

pr

EDOO4063-01Polished Black/Warm Grey

EDOO4063-02Polished Gold/Dark Grey

EDOO4063-03Lead/Black Iridium

EDOO4063-04Matte Black/Grey Polarized

EDOO4063-06Brown Chrome/Bronze Polarized

EDOO4063-07Polished Chrome/Positive Red

EDOO4063-09Lead/Black Iridium Polarized

ED11-161Black/Clear Lens

ED11-162Black /Grey Lens

ED11-163Black/Yellow Lens

INDUSTRIAL M fRAME® ∙ Tested and qualified as true safety glasses, this lens/frame combination meets ANSI Z87.1 standards for clarity and impact resistance, as well as the protection criteria of Canada’s CSA Z94.3-02 standards

∙ Oakley’s patented technologies maintain optical clarity with lens contours that enhance side protection from sun, wind and impact

∙ Stress-resistant O Matter® frame material is engineered with a critical degree of flexibility to absorb impact

∙ Plutonite® lens material is impact resistant and offers added protection by filtering out 100% of all UVA, UVB, UVC and harmful blue light up to 400nm

∙ UV protection is built into the lens material – it is not a surface coating that can wear away – so even our Clear lens offers the full level of UV filtering.

PLAINTIff™ SQUARED ∙ Flexible titanium Mono Shock™ spring hinge ∙ Zero-pressure Three-Point-Fit ∙ Lightweight C-5 metal frame material ∙ Edgy style with square lens shape and color-filled stems

∙ Large lens size with 8-base curve for ultimate protection

Meets ANSI Z87.1 Standards for clarity and impact resistance, as well as the protection criteria of Canada’s CSA Z94.3-02

Standards

Mee

ts a

nsi

Z87

.1 s

tand

ards

$21.95

$34.50

$11.99

$31.99

$28.99

PDMS28M M $79.95PDMS28L L $79.95PDMS28XL XL $79.95PDMS28XXL XXL $89.95PDMS28XXXL XXXL $89.95

PDMT252M M $31.95PDMT252L L $31.95PDMT252XL XL $31.95PDMT252XXL XXL $37.95PDMT252XXXL XXL $37.95

11

———————————

—

——

——

——

——

——

—

——

——

——

—

—

——

——

——

—

———————————————

—————————————————

pr

PDMC255

VORTEx CAP ∙ 100% cotton with Velcro closure

PDMC253

SLEDGEHAMMER CAP ∙ This cap is great for every Matco Tools fan Matco Tools embroidered on front and sledgehammer design around full cap will be an instant favorite

∙ 100% cotton with velcro closure

PDRNV8

RAT fINK TOON TUMBLER ∙ 16 oz. plastic mug ∙ Classic Rat Fink full wrap graphic

∙ Top rack dishwasher safe

PDMC243

DOUBLE STRIPE CAP ∙ Matco Tools embroidered on the side and the hex/eagle logo on the front. Velcro closure.

FC15-483SS

SILVER HAWK STAINLESS KNIfE 3"

FCBD-102

BDO fILET KNIfE ORANGE/BLACK CAMO 11"

MK201PS

REDI-EDGE POCKET SHARPENER ∙ This compact, card-sized knife sharpener fits in your pocket

∙ Blades are made of 92.6 grade micro carbon carbide and will sharpen all of the coated knives on the market today

∙ You’ll always maintain perfect 20° shoulders, whether sharpening for the first time or putting an edge back on

∙ Comes with a black polyester sheath

The sale of certain knives is illegal in some states and it is ultimately the responsibility of the distributor to know and obey the laws of the state and localities where he/she resides and sells tools. Matco does not defend or pay court costs associated with distributors breaking their state and local laws and the fees they incur in the defense of their actions.

RUGBY HOODIE ∙ 55/45 Cotton ∙ 9 oz. weight ∙ Graphite

DRAGON LONG SLEEVE TEE ∙ 100% preshrunk cotton - black

Save nearly 10%

FC16-652B

MAJESTIC DRAGON BLK W/DMS 4.5"

Matco Ball Caps $24.95 each

BEST Box IN ThE BUSINESS.yOU CAnOwn ThE

Professional Mechanic from: Smyrna, DE, USA

Read additional reviews online @ www.matcotools.com

Want to know more?

TOP RATED TOOL

FACEbook.CoM/MATCoToolS

BEST AxLE NUT SET fOR THE MONEY.

$2399*

The products on Matco’s National Promo are limited in quantity and subject to availability. Matco reserves the right to correct printing errors.

PR0613RED

JoIN US oN FACEbook

AXL4548

8 PIECE AxLE NUT SOCKET SET ∙ Extra-long 1/2" drive 6 point metric sockets ∙ Use with a ratchet breaker bar impact wrench or torque wrench ∙ Includes sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm, and 39mm

Shown here: 4225R Sapphire Blue Chrome Trim

*Advertised weekly payments are an estimate and may not apply to all contracts. The weekly payments shown are part of a limited time promotion and are only available in participating areas. The payments are based on 260 week contracts and payments will vary based on finance charges, taxes and down payment. Additional fees may apply. All credit sale contracts are subject to approved credit, not all applicants will qualify. See your Matco Tools Distributor for details.

4122R, 41F22R, 41W22R, 4222R, and 6128SR series boxes are excluded

weekly payments aS Low aS

Limited time offer

Save over $12

$92.50

GET PRE-aPPRoVED RIghT On yOUR phOnELog on to complete a credit application and get an answer instantly:www.matcotools.com/getpreapproved

I have removed axle nuts with an impact wrench every day for the past

year with this set, it has performed flawlessly. It is showing very little

signs of wear. With the Matco name on the sockets I know that they're

backed for life. Why pay more?

Matco Tools Sales Flyer #6

Documents

Transcript of Matco Tools Sales Flyer #6