Masterfinish Catalogue c&l
-
Upload
cl-tool-centre-pty-ltd -
Category
Documents
-
view
304 -
download
12
description
Transcript of Masterfinish Catalogue c&l
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
1
AustrAliA’s ultimAte
rAnge of ContrACtors
tools for ConCrete,
BriCk, reo, render &
PlAster trAdes
Tools & EquipmentCatalogue
www.master f inish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
2 3
Tool Blade GuaGe
101B 120 x 356mm light
109B 100 x 355mm light
191B 115 x 405mm light
NoTe: Trowel 161a has tapered width
POINTED TROWEL
SQUARE TROWEL
COVING TROWEL
STEEL FLOATS VARIABLE MARGIN TOOL
EDGING TOOLS
VEE JOINTER
FIXED MARGIN TOOL
Handle a: used for trowelling concrete floors or similar work. The curve of the blade end allows for the reduction of blade end marking. The moulded plastic handle is designed for ease of grip and operator comfort.
Handle B: This traditional turned timber handle suits applications such as trowelling solvent based products that may attack plastic handles. (101B)
(191a)
“a” Handle Moulded Plastic
“B” HandleWood
used where the pointed end trowel is not suitable eg finishing stair toppings and kerb & gutter.
Tool Blade Guage
102a 280 x 120mm light
162a 280 x 120mm Heavy
181a 115 x 405mm light
Cement Rendering and plastering
PP73 365 x 120mm light
450S120 450 x 120mm light
500S120 500 x 120mm light
600S120 600 x 120mm light
350S150 350 x 150mm light
400S150 400 x 150mm light
used to form a cove where a wall and floor meet. The 201 coving has a traditional use in ‘rubbing up’ the setting concrete prior to steel trowelling. If the concrete is left with the finish created by the coving trowel ie a more textured finish than a steel trowelled finish, this is known as a coving finish or ‘stipple’ finish.
Tool RadIuS WIdTH HeIGHT
201 25 145mm 70mm
202 25 145mm 32mm
203 12 95mm 25mm
207 75 140mm 90mm
(102a)
W
H
Rad
(201)
Concr
ete
Flo
or
Finis
hin
g T
row
els
Concre
te Flo
or Fin
ishin
g Tro
wels
used to ‘rub up’ a concrete floor prior to steel trowelling or to work in coloured dry shake. They produce a textured finish smoother than a wood float, which suits outdoor paving applications. The trowels feature a long wearing robust steel blade that is turned up all round.
(209) 160 X 210stainless steel blade
(219) 150 x 380
(229) 290 X 100
(302)
Tool Width depth
301 75 10
304 75 19
305 75 25
306 75 32
302 150 12
312 150 20
315 150 25
used to form ‘dummy’ joints in concrete paving. The joint in the concrete reduces the thickness of the paving and if cracking occurs, the crack should be at the line of the ‘dummy’ joint. The depth of the ‘dummy’ joint should be 1/5 of the slab thickness.
The tools are formed from long wearing steel and have robust, comfortable handles.
Tool 777
Grooving bit adjusts to desired width of margin between 70-160mm
WidthMargin
Tool WIdTH MaRGIN
775 140 100
776 140 150
777 120 70 to 160
used to trowel a smooth finish to slab edges and produce a smooth face margin to textured or wood float finish external paving. The range encompasses a variety of edge radii and blade widths to suit an extensive range of applications.The blades are formed from steel.
Stainless steel is used on Tool Nos. 401S 402S and 403S and 700 through to 708.
Tool Radius Width length depth
401 5 75 140 12
402 6 75 140 12
403 10 75 140 19
404 5 38 140 12
405 5 50 140 12
406 6 100 150 14
406F 10 75 140 40
408 19 80 140 19
410 10 145 230 14
Stainless Steel
401S 5 75 140 12
402S 6 75 140 12
403S 10 75 140 19
large Size for Kerb and Gutter Work etc.
700 12 150 230 24
701 25 150 230 24
702 12 112 175 22
703 25 112 175 19
706 10 105 150 14
708 20 140 200 19
709 25 220 200 25
d(304)
W
MAGNESIUM BLADE FLOATS
used to produce a textured finish smoother than wood float. a robust and long wearing tool with a slightly curved or broken in blade.
Tool Size
CF012PF 300 x 80mm
CF016PF 405 x 80mm
CF020PF 510 x 80mm
Tool 776
(708)
Radius
d
Wl
(406)
Tool Blade Gauge
101a 120 x 365mm light
103a 120 x 365mm Heavy
109a 100 x 355mm light
161a 120 x 660mm Heavy
Tool Blade Gauge
165a 115 x 600mm light
191a 115 x 405mm light
192a 115 x 450mm light
193a 115 x 500mm light
(CF012PF)
See Kraft section of this catalogue for full range. (pg22)
See page 8 for Walking Jointers.
See page 8 for new Walking edgers.
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
2 3
Tool Blade GuaGe
101B 120 x 356mm light
109B 100 x 355mm light
191B 115 x 405mm light
NoTe: Trowel 161a has tapered width
POINTED TROWEL
SQUARE TROWEL
COVING TROWEL
STEEL FLOATS VARIABLE MARGIN TOOL
EDGING TOOLS
VEE JOINTER
FIXED MARGIN TOOL
Handle a: used for trowelling concrete floors or similar work. The curve of the blade end allows for the reduction of blade end marking. The moulded plastic handle is designed for ease of grip and operator comfort.
Handle B: This traditional turned timber handle suits applications such as trowelling solvent based products that may attack plastic handles. (101B)
(191a)
“a” Handle Moulded Plastic
“B” HandleWood
used where the pointed end trowel is not suitable eg finishing stair toppings and kerb & gutter.
Tool Blade Guage
102a 280 x 120mm light
162a 280 x 120mm Heavy
181a 115 x 405mm light
Cement Rendering and plastering
PP73 365 x 120mm light
450S120 450 x 120mm light
500S120 500 x 120mm light
600S120 600 x 120mm light
350S150 350 x 150mm light
400S150 400 x 150mm light
used to form a cove where a wall and floor meet. The 201 coving has a traditional use in ‘rubbing up’ the setting concrete prior to steel trowelling. If the concrete is left with the finish created by the coving trowel ie a more textured finish than a steel trowelled finish, this is known as a coving finish or ‘stipple’ finish.
Tool RadIuS WIdTH HeIGHT
201 25 145mm 70mm
202 25 145mm 32mm
203 12 95mm 25mm
207 75 140mm 90mm
(102a)
W
H
Rad
(201)
Concr
ete
Flo
or
Finis
hin
g T
row
els
Concre
te Flo
or Fin
ishin
g Tro
wels
used to ‘rub up’ a concrete floor prior to steel trowelling or to work in coloured dry shake. They produce a textured finish smoother than a wood float, which suits outdoor paving applications. The trowels feature a long wearing robust steel blade that is turned up all round.
(209) 160 X 210stainless steel blade
(219) 150 x 380
(229) 290 X 100
(302)
Tool Width depth
301 75 10
304 75 19
305 75 25
306 75 32
302 150 12
312 150 20
315 150 25
used to form ‘dummy’ joints in concrete paving. The joint in the concrete reduces the thickness of the paving and if cracking occurs, the crack should be at the line of the ‘dummy’ joint. The depth of the ‘dummy’ joint should be 1/5 of the slab thickness.
The tools are formed from long wearing steel and have robust, comfortable handles.
Tool 777
Grooving bit adjusts to desired width of margin between 70-160mm
WidthMargin
Tool WIdTH MaRGIN
775 140 100
776 140 150
777 120 70 to 160
used to trowel a smooth finish to slab edges and produce a smooth face margin to textured or wood float finish external paving. The range encompasses a variety of edge radii and blade widths to suit an extensive range of applications.The blades are formed from steel.
Stainless steel is used on Tool Nos. 401S 402S and 403S and 700 through to 708.
Tool Radius Width length depth
401 5 75 140 12
402 6 75 140 12
403 10 75 140 19
404 5 38 140 12
405 5 50 140 12
406 6 100 150 14
406F 10 75 140 40
408 19 80 140 19
410 10 145 230 14
Stainless Steel
401S 5 75 140 12
402S 6 75 140 12
403S 10 75 140 19
large Size for Kerb and Gutter Work etc.
700 12 150 230 24
701 25 150 230 24
702 12 112 175 22
703 25 112 175 19
706 10 105 150 14
708 20 140 200 19
709 25 220 200 25
d(304)
W
MAGNESIUM BLADE FLOATS
used to produce a textured finish smoother than wood float. a robust and long wearing tool with a slightly curved or broken in blade.
Tool Size
CF012PF 300 x 80mm
CF016PF 405 x 80mm
CF020PF 510 x 80mm
Tool 776
(708)
Radius
d
Wl
(406)
Tool Blade Gauge
101a 120 x 365mm light
103a 120 x 365mm Heavy
109a 100 x 355mm light
161a 120 x 660mm Heavy
Tool Blade Gauge
165a 115 x 600mm light
191a 115 x 405mm light
192a 115 x 450mm light
193a 115 x 500mm light
(CF012PF)
See Kraft section of this catalogue for full range. (pg22)
See page 8 for Walking Jointers.
See page 8 for new Walking edgers.
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
4 5
Tool Size
801 112 x 300
802 112 x 380
803 112 x 450
804 50 x 450
824 65 x 600
Tool Size
1038 300sq.
1039 330sq.
1040 400sq.
Tool length
SP18 450
SP24 600
SP30 750
Tool Type Size
1030 external 33 x 33
1031 external 33 x 20
1033 Internal 28 x 28
WOOD FLOATS
FORMWORK SUPPORT
WOOD FLOATS
STEP RISER
STEEL MARBLE SHEEN TROWEL
FLEXIBLE CUTTER
PLASTERER’S SQUARE
STEP NOSING
EDGING TOOLS NOSE AND CORNER TOOL
NON-SLIP GROOVE FORMING TOOLS FOR STEPS AND RAMPS
PLASTIC MARBLE SHEEN FLOAT
PLASTERER’S HAWK
Wood F
loats
& P
last
er
Tools
Pool, K
erb
& R
ebate
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
(801)
(824)
The floats feature a long wearing hardwood face and a lightweight, but tough, orange plastic handle that is adhered to the timber to eliminate marking from screw fixing.
The step nosing tools are made from stainless steel and also have application in forming external corners on cement render.
(903)
(905)
Tools No.s 901 and 903 form semi-circular corrugations at 9 mm centres.
Tools No.s 904 & 905 form an 8mm x 16mm recess that is filled with non slip grit.
The step riser tool is formed from steel. The angle is set to produce a 20 mm undercut on a 150 mm riser.
(1035)
used in conjunction with a straight edge to scrape a corner and can be locked at the desired angle and depth
Plasterers hawks are made with a light but tough aluminium plate, a screw in plastic handle and a sponge hand cushion.
Plasterers internal and external corner tools have a stainless steel blade formed to the traditional pencil round.
(1023)
Plasterers edging tools have a stainless steel blade and are formed to cut a sharp edging around steel door jams or similar situations
(1033)
(1030)
Tool Radius
501 6
502 10
Tool No. Size mm
120a 300
121a 350
122a 450
122S 450 with 330 Rib
122SS 122S with Square Back
126a 555
126S 555 with 380 Rib
126SS 126S with Square Back
Tool No. of Grooves Groove Size
901 3 -
903 5 -
904 1 16 x 6
905 2 at 19mm apart 16 x 6
Tool Radius
601 6
Ste
p a
nd R
am
p T
ools
Pla
stere
r’s
Tools
(1020)
originally developed for use on marble sheen finishing in swimming pools, the blade is allowed to flex with only a short support rib (see tools Nos. 120a, 121a, 122a & 126a).
a further development from this is a similar trowel with a longer rib for greater rigidity in the blade (see ‘S’ series). The blade is made from a flexible spring steel and the tool
is used to cut and scrape spraycrete to desired shape in swimming pools and similar applications.
(122S)
(122SS)
(125)
(127)
The blade is made from 3 mm thick low-density white polyethelene and is fixed to a light weight plastic handle. originally developed to trowel marble sheen in swimming pools, but now finds a wider use on various wall applications.
KGT – The steel blade is shaped to finish 150 mm kerb with a 38 mm splay and give a 25 mm radius to the kerb nosing and gutter coving.
KGC – The steel blade is shaped to finish the coving in kerb and gutter with 25 mm radius.
KGe – The steel blade is shaped to finish the nose of the kerb with a 25 radius.
KGCT – The steel blade is shaped to finish a gutter crossing with a 40 mm lip.
KGB - Kerb Bow formed from 30 mm x 10 mm steel bar and shaped to form up 150 mm splayed kerb using 50 mm thick timber.
KGP 2 – Kerb Plate cut to shape from steel plate to form 150 mm kerb and used in construction with kerb bow. If 150 mm straight kerb is required, the plate can be placed to form it.
150
150
RFB-50 - Slab edge Rebate Form Bracket
Manufactured to make the task of forming the 150 mm brickwork rebate on house floor slabs with ease.
Suitable for use with 50 mm timber formwork.
STeel PeGS
Machined from a tough 30 mm diameter steel bar and drilled with 5 mm diameter holes, staggered at 90º to allow nail fixing of timber formwork.
(RFB-50)
(RFBa35)
RFBa35 - adjustable Bracket
Bracket is adjustable to suit 35mm to 50mm timber. (Preset at 35mm)
(120a)
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
4 5
Tool Size
801 112 x 300
802 112 x 380
803 112 x 450
804 50 x 450
824 65 x 600
Tool Size
1038 300sq.
1039 330sq.
1040 400sq.
Tool length
SP18 450
SP24 600
SP30 750
Tool Type Size
1030 external 33 x 33
1031 external 33 x 20
1033 Internal 28 x 28
WOOD FLOATS
FORMWORK SUPPORT
WOOD FLOATS
STEP RISER
STEEL MARBLE SHEEN TROWEL
FLEXIBLE CUTTER
PLASTERER’S SQUARE
STEP NOSING
EDGING TOOLS NOSE AND CORNER TOOL
NON-SLIP GROOVE FORMING TOOLS FOR STEPS AND RAMPS
PLASTIC MARBLE SHEEN FLOAT
PLASTERER’S HAWK
Wood F
loats
& P
last
er
Tools
Pool, K
erb
& R
ebate
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
(801)
(824)
The floats feature a long wearing hardwood face and a lightweight, but tough, orange plastic handle that is adhered to the timber to eliminate marking from screw fixing.
The step nosing tools are made from stainless steel and also have application in forming external corners on cement render.
(903)
(905)
Tools No.s 901 and 903 form semi-circular corrugations at 9 mm centres.
Tools No.s 904 & 905 form an 8mm x 16mm recess that is filled with non slip grit.
The step riser tool is formed from steel. The angle is set to produce a 20 mm undercut on a 150 mm riser.
(1035)
used in conjunction with a straight edge to scrape a corner and can be locked at the desired angle and depth
Plasterers hawks are made with a light but tough aluminium plate, a screw in plastic handle and a sponge hand cushion.
Plasterers internal and external corner tools have a stainless steel blade formed to the traditional pencil round.
(1023)
Plasterers edging tools have a stainless steel blade and are formed to cut a sharp edging around steel door jams or similar situations
(1033)
(1030)
Tool Radius
501 6
502 10
Tool No. Size mm
120a 300
121a 350
122a 450
122S 450 with 330 Rib
122SS 122S with Square Back
126a 555
126S 555 with 380 Rib
126SS 126S with Square Back
Tool No. of Grooves Groove Size
901 3 -
903 5 -
904 1 16 x 6
905 2 at 19mm apart 16 x 6
Tool Radius
601 6
Ste
p a
nd R
am
p T
ools
Pla
stere
r’s
Tools
(1020)
originally developed for use on marble sheen finishing in swimming pools, the blade is allowed to flex with only a short support rib (see tools Nos. 120a, 121a, 122a & 126a).
a further development from this is a similar trowel with a longer rib for greater rigidity in the blade (see ‘S’ series). The blade is made from a flexible spring steel and the tool
is used to cut and scrape spraycrete to desired shape in swimming pools and similar applications.
(122S)
(122SS)
(125)
(127)
The blade is made from 3 mm thick low-density white polyethelene and is fixed to a light weight plastic handle. originally developed to trowel marble sheen in swimming pools, but now finds a wider use on various wall applications.
KGT – The steel blade is shaped to finish 150 mm kerb with a 38 mm splay and give a 25 mm radius to the kerb nosing and gutter coving.
KGC – The steel blade is shaped to finish the coving in kerb and gutter with 25 mm radius.
KGe – The steel blade is shaped to finish the nose of the kerb with a 25 radius.
KGCT – The steel blade is shaped to finish a gutter crossing with a 40 mm lip.
KGB - Kerb Bow formed from 30 mm x 10 mm steel bar and shaped to form up 150 mm splayed kerb using 50 mm thick timber.
KGP 2 – Kerb Plate cut to shape from steel plate to form 150 mm kerb and used in construction with kerb bow. If 150 mm straight kerb is required, the plate can be placed to form it.
150
150
RFB-50 - Slab edge Rebate Form Bracket
Manufactured to make the task of forming the 150 mm brickwork rebate on house floor slabs with ease.
Suitable for use with 50 mm timber formwork.
STeel PeGS
Machined from a tough 30 mm diameter steel bar and drilled with 5 mm diameter holes, staggered at 90º to allow nail fixing of timber formwork.
(RFB-50)
(RFBa35)
RFBa35 - adjustable Bracket
Bracket is adjustable to suit 35mm to 50mm timber. (Preset at 35mm)
(120a)
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
6 7Please note that all the tools on this page are used in conjunction with the Master Finish telescopic handles or use the 588 clip together handle.
FIXED POSITION HANDLE SCREEDS WALKING TROWEL
FRESNO TROWELS
ALUMINIUM BULLFLOATS
FINISHING BROOMS
LIGHT WEIGHT ALUMINIUM STRAIGHT EDGE
VARIABLE POSITION CLAMPED HANDLE SCREED - AvAilABle with level viAl
Conc
rete
Scr
eeds
& S
trai
ght
Edg
es
Concre
te S
lab Fin
ishin
g
Tool length (mm)
F12 1200
F15 1500
F18 1800
F21 2100
F24 2400
F27 2700
F30 3000
F36 3600
Tool No. length (mm)
1062 600
1063 900
1064 1200
1065 1500
1068 1800
Tool length Features
444 440 Round ends
555 600 Round ends
556 600 one Square end
Stainless Steel
557 600 Round ends
558 600 one Square end
length (mm) Clamp ToolClamp with
level Vial
1200 C12 C12l
1500 C15 C15l
1800 C18 C18l
2100 C21 C21l
2400 C24 C24l
2700 C27 C27l
3000 C30 C30l
3600 C36 C36l
4200* C42 C42l
4500* C45 C45l
4800* C48 C48l
length Powder Coated Mill Finish
(mm) (White) (plain)
1200 P12 P12P
1500 P15 P15P
1800 P18 P18P
2100 P21 P21P
2400 P24 P24P
2700 P27 P27P
3000 P30 P30P
3600 P36 P36P
‘Clamp on’ style handle, which may be reversed to the working face for second use. Fitted with end plugs and powder coated for ease of clean up.
light weight accurate straight edge – measures 70 x 19. uses include ruling cement render, tiling and as a general construction straight edge. Fitted with end plugs and powder coated for ease of clean up, or in mill finish.
ClaMP HaNdle SCReed WITH adJuSTaBle leVel VIal
PATENTED LEVEL VIAL (ADJUSTABLE)
ClaMP HaNdle SCReed
MIll FINISH
PoWdeR CoaTed FINISH
* Size 4200 to 4800 may not be sufficiently
rigid for close tolerance work.
Traditional 50 x 36 aluminium box section with one radius and one sharp cutting edge. The handle fixes to the top of the screed. Fitted with end plugs and powder coated for ease of clean up.
Trowel concrete floors from a standing position. The tubular connection pivots freely to allow the changing angle between the blade and handle to occur.
The square end blade allows trowelling up against a wall.
used in conjunction with telescopic handle 1076 or clip handle 588.
(555)
(556)
TOOL: 606 – 600mm BladeThe illustration shows the standard fitting which can be locked at the desired angle. With this fitting the Fresno may also be used as a walking trowel by locking the fitting parallel to the blade.
TOOL: 607 – 600mm BladeThe Fresno may be fitted with a bracket and tilt mechanism as illustrated – used only in a push/pull operation.
TOOL: 609 -900mmBladea larger version of Tool No. 607.
(1063)
Features· long wearing aluminium alloy blade· low maintenance· Radius on blade corners reduces end marking· Gives concrete a smoother wet finish· Makes final finish easier
BLADE OPERATION:The tilt of the blade is adjustable and controlled by twisting the handle. This enables the operator to change the tilt of the blade (continuously if required) to achieve the optimum finish to the concrete. If the blade lies flat on the slab it leaves a rough finish but will close and fill holes. When the blade is tilted on an angle, a smoother finish will result. There is no need to raise or lower the handle, simply twist it for best results.
HaIR aNd FIBRe BRISTle TIMBeR SToCKThe brooms use a quality hair and fibre bristle.
Tool leNGTH (mm)
1572 600
1573 750
1574 900
(1974)
(1574)
Tool Colour Brush Texture length mm
1974 Black standard/fine 900
1974 Blue medium 900
1974 Green coarse 900
1904 Black standard/fine 900 replacement
(606)
(607)
New MeCHaN
ISM
New MeCHaN
ISM
New MeCHaN
ISM
NYloN BRISTle aluMINIuM SToCKFitted with 360 degree adjustable bracket
(Reg design No.123595)Replacement brush Tool No.1904
Medium Brush Texture
Standard/FineBrush Texture Coarse
Brush Texture
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
6 7Please note that all the tools on this page are used in conjunction with the Master Finish telescopic handles or use the 588 clip together handle.
FIXED POSITION HANDLE SCREEDS WALKING TROWEL
FRESNO TROWELS
ALUMINIUM BULLFLOATS
FINISHING BROOMS
LIGHT WEIGHT ALUMINIUM STRAIGHT EDGE
VARIABLE POSITION CLAMPED HANDLE SCREED - AvAilABle with level viAl
Conc
rete
Scr
eeds
& S
trai
ght
Edg
es
Concre
te S
lab Fin
ishin
g
Tool length (mm)
F12 1200
F15 1500
F18 1800
F21 2100
F24 2400
F27 2700
F30 3000
F36 3600
Tool No. length (mm)
1062 600
1063 900
1064 1200
1065 1500
1068 1800
Tool length Features
444 440 Round ends
555 600 Round ends
556 600 one Square end
Stainless Steel
557 600 Round ends
558 600 one Square end
length (mm) Clamp ToolClamp with
level Vial
1200 C12 C12l
1500 C15 C15l
1800 C18 C18l
2100 C21 C21l
2400 C24 C24l
2700 C27 C27l
3000 C30 C30l
3600 C36 C36l
4200* C42 C42l
4500* C45 C45l
4800* C48 C48l
length Powder Coated Mill Finish
(mm) (White) (plain)
1200 P12 P12P
1500 P15 P15P
1800 P18 P18P
2100 P21 P21P
2400 P24 P24P
2700 P27 P27P
3000 P30 P30P
3600 P36 P36P
‘Clamp on’ style handle, which may be reversed to the working face for second use. Fitted with end plugs and powder coated for ease of clean up.
light weight accurate straight edge – measures 70 x 19. uses include ruling cement render, tiling and as a general construction straight edge. Fitted with end plugs and powder coated for ease of clean up, or in mill finish.
ClaMP HaNdle SCReed WITH adJuSTaBle leVel VIal
PATENTED LEVEL VIAL (ADJUSTABLE)
ClaMP HaNdle SCReed
MIll FINISH
PoWdeR CoaTed FINISH
* Size 4200 to 4800 may not be sufficiently
rigid for close tolerance work.
Traditional 50 x 36 aluminium box section with one radius and one sharp cutting edge. The handle fixes to the top of the screed. Fitted with end plugs and powder coated for ease of clean up.
Trowel concrete floors from a standing position. The tubular connection pivots freely to allow the changing angle between the blade and handle to occur.
The square end blade allows trowelling up against a wall.
used in conjunction with telescopic handle 1076 or clip handle 588.
(555)
(556)
TOOL: 606 – 600mm BladeThe illustration shows the standard fitting which can be locked at the desired angle. With this fitting the Fresno may also be used as a walking trowel by locking the fitting parallel to the blade.
TOOL: 607 – 600mm BladeThe Fresno may be fitted with a bracket and tilt mechanism as illustrated – used only in a push/pull operation.
TOOL: 609 -900mmBladea larger version of Tool No. 607.
(1063)
Features· long wearing aluminium alloy blade· low maintenance· Radius on blade corners reduces end marking· Gives concrete a smoother wet finish· Makes final finish easier
BLADE OPERATION:The tilt of the blade is adjustable and controlled by twisting the handle. This enables the operator to change the tilt of the blade (continuously if required) to achieve the optimum finish to the concrete. If the blade lies flat on the slab it leaves a rough finish but will close and fill holes. When the blade is tilted on an angle, a smoother finish will result. There is no need to raise or lower the handle, simply twist it for best results.
HaIR aNd FIBRe BRISTle TIMBeR SToCKThe brooms use a quality hair and fibre bristle.
Tool leNGTH (mm)
1572 600
1573 750
1574 900
(1974)
(1574)
Tool Colour Brush Texture length mm
1974 Black standard/fine 900
1974 Blue medium 900
1974 Green coarse 900
1904 Black standard/fine 900 replacement
(606)
(607)
New MeCHaN
ISM
New MeCHaN
ISM
New MeCHaN
ISM
NYloN BRISTle aluMINIuM SToCKFitted with 360 degree adjustable bracket
(Reg design No.123595)Replacement brush Tool No.1904
Medium Brush Texture
Standard/FineBrush Texture Coarse
Brush Texture
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
8 9
WARNING – When using telescopic handles and long length of clip together handle, near to electric wires or other high voltage installations, care should be taken to avoid contacting live wires as such contact may be lethal.
TELESCOPIC HANDLE & CLIP TOGETHER HANDLE CONCRETE PLACING RAKES - timber or aluminium handles available
FOAM FLOATS
FLOOR SCRAPERS
ADHESIVE SPEADERS
Ext
ens
ion
Pole
s &
Tools
Concre
te S
lab Fin
ishin
g
These trowels have a 1.6 mm thick steel blade and timber handle.
QTF has a 10 mm square tooth for applications requiring a thick bed of adhesive such as quarry tiles.
QTF 2 has a 6 mm saw tooth for areas where less adhesive is required.
TOOL: 1076 TELESCOPIC HANDLE
extends from 2.75 m to 5 m.
Widely used for many floating and finishing jobs enabling the work to be achieved from a standing position, external from the concrete slab.
The inside tube is grooved. a pin penetrates this groove. This allows the twisting action the operator applies to the handle to be transferred to the floor. The handle length is locked by lightly twisting the collet nut.
The handle also features a removable clip on steel tube adaptor (part No. 1076e). This allows the operator to unclip the handle from the tool for cleaning, storage or to fit to another tool. additional adaptor tubes 1076e may be purchased for this purpose.
Hose adapter &cut off valve
(QTF)
Spray Heads
Tool Roller Size
1045 114 x 450
1046 114 x 600
1047 114 x 7501100mm
(eaGGuN)
TOOL: 588
CLIP TOGETHER HANDLE
2 meters long.
The aluminium tube is fluted to enhance grip. The inserted end tube is zinc plated
steel, swaged down to fit neatly on the shaft of a bull , walking trowel, or broom
bracket.
Three or four of these handles may be aligned together to give a reach of 6 to 8 metres.
To obtain a 7 m reach, a 588 clip handle can be clipped onto the 1076 telescopic handle.
Fits bullfloats, brooms, walking trowels and Fresno trowels
(1076)
Tool Fits
700W 1076 & 558
708W 1076 & 558
302W 1076 & 558
312W 1076 & 558
(QTF 2)
(1076e)
(588)
SOLID ROLLER
WALKING EDGE TROWELS & GROOVERS
WATER SPRAY
(1045)
R500 Blade size 480 mm x 120 mm – push or pull concrete with the square or formed side of the blade.
R500H Blade size 480 mm x 120 mm – push or pull concrete with the square or formed side of the blade – has a steel finger welded to the blade to hook the reinforcement steel.
1156 Foam Float has an additional feature of perforated aluminium backing plate for ease of cleaning the foam after use.
1155 Sponge Foam Float features lightweight plastic handle and aluminium backing plate.
1155R Replacement foam - may be fixed using contact cement
(1155)
lHS – 190 mm wide blade – heavy stock to impact hard to remove material on floors – spare blade lHSB7
FS6 – 150 mm wide blade – light weight – spare blade FS6B
FS14 – 355 mm wide - lighter gauge blade to suit greater coverage of less difficult to remove deposit – spare blade FS14B
466 Stainless steel part circle - 75mm radius
206 semi circle - 50mm radius
413 45° Bevel edger – 100mm wide x 25mm bevel
414 45° Bevel edger – 125mm wide x 25mm bevel
long handle scrapers feature replaceable hardened steel blades and durable construction. Choose a scraper to suit your application.
(R500)
(R500H)
(SB)
(RH) - Timber
(1156)
STANDING BRACKET STEEL FLOATS
DISH DRAIN OR COVING TOOLS 45° BEVEL EDGER
SB Standing Bracket – This bracket may be attached to the handle of tools such as the 302 Groover or the 702 edger, to allow for the fitting of a 1076 or 588 handle. The tools can then be used in positions that are difficult to reach, or simply from a standing position.
Steel floats that are used with 1076 or 588 handle for rubbing in dry shakes toppings or stencil pattern concrete.
Tool No. Size
219W 150 x 380
209W 160 x 210
Tool description
R500 500mm blade no hook
R500H 500mm blade with reinforced hook
(206) (466)
(413 & 414)
(209W)
(219W)
(RH alum) - aluminium
700W / 708W 302W / 312W
designed for washing exposed aggregate
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
8 9
WARNING – When using telescopic handles and long length of clip together handle, near to electric wires or other high voltage installations, care should be taken to avoid contacting live wires as such contact may be lethal.
TELESCOPIC HANDLE & CLIP TOGETHER HANDLE CONCRETE PLACING RAKES - timber or aluminium handles available
FOAM FLOATS
FLOOR SCRAPERS
ADHESIVE SPEADERS
Ext
ens
ion
Pole
s &
Tools
Concre
te S
lab Fin
ishin
g
These trowels have a 1.6 mm thick steel blade and timber handle.
QTF has a 10 mm square tooth for applications requiring a thick bed of adhesive such as quarry tiles.
QTF 2 has a 6 mm saw tooth for areas where less adhesive is required.
TOOL: 1076 TELESCOPIC HANDLE
extends from 2.75 m to 5 m.
Widely used for many floating and finishing jobs enabling the work to be achieved from a standing position, external from the concrete slab.
The inside tube is grooved. a pin penetrates this groove. This allows the twisting action the operator applies to the handle to be transferred to the floor. The handle length is locked by lightly twisting the collet nut.
The handle also features a removable clip on steel tube adaptor (part No. 1076e). This allows the operator to unclip the handle from the tool for cleaning, storage or to fit to another tool. additional adaptor tubes 1076e may be purchased for this purpose.
Hose adapter &cut off valve
(QTF)
Spray Heads
Tool Roller Size
1045 114 x 450
1046 114 x 600
1047 114 x 7501100mm
(eaGGuN)
TOOL: 588
CLIP TOGETHER HANDLE
2 meters long.
The aluminium tube is fluted to enhance grip. The inserted end tube is zinc plated
steel, swaged down to fit neatly on the shaft of a bull , walking trowel, or broom
bracket.
Three or four of these handles may be aligned together to give a reach of 6 to 8 metres.
To obtain a 7 m reach, a 588 clip handle can be clipped onto the 1076 telescopic handle.
Fits bullfloats, brooms, walking trowels and Fresno trowels
(1076)
Tool Fits
700W 1076 & 558
708W 1076 & 558
302W 1076 & 558
312W 1076 & 558
(QTF 2)
(1076e)
(588)
SOLID ROLLER
WALKING EDGE TROWELS & GROOVERS
WATER SPRAY
(1045)
R500 Blade size 480 mm x 120 mm – push or pull concrete with the square or formed side of the blade.
R500H Blade size 480 mm x 120 mm – push or pull concrete with the square or formed side of the blade – has a steel finger welded to the blade to hook the reinforcement steel.
1156 Foam Float has an additional feature of perforated aluminium backing plate for ease of cleaning the foam after use.
1155 Sponge Foam Float features lightweight plastic handle and aluminium backing plate.
1155R Replacement foam - may be fixed using contact cement
(1155)
lHS – 190 mm wide blade – heavy stock to impact hard to remove material on floors – spare blade lHSB7
FS6 – 150 mm wide blade – light weight – spare blade FS6B
FS14 – 355 mm wide - lighter gauge blade to suit greater coverage of less difficult to remove deposit – spare blade FS14B
466 Stainless steel part circle - 75mm radius
206 semi circle - 50mm radius
413 45° Bevel edger – 100mm wide x 25mm bevel
414 45° Bevel edger – 125mm wide x 25mm bevel
long handle scrapers feature replaceable hardened steel blades and durable construction. Choose a scraper to suit your application.
(R500)
(R500H)
(SB)
(RH) - Timber
(1156)
STANDING BRACKET STEEL FLOATS
DISH DRAIN OR COVING TOOLS 45° BEVEL EDGER
SB Standing Bracket – This bracket may be attached to the handle of tools such as the 302 Groover or the 702 edger, to allow for the fitting of a 1076 or 588 handle. The tools can then be used in positions that are difficult to reach, or simply from a standing position.
Steel floats that are used with 1076 or 588 handle for rubbing in dry shakes toppings or stencil pattern concrete.
Tool No. Size
219W 150 x 380
209W 160 x 210
Tool description
R500 500mm blade no hook
R500H 500mm blade with reinforced hook
(206) (466)
(413 & 414)
(209W)
(219W)
(RH alum) - aluminium
700W / 708W 302W / 312W
designed for washing exposed aggregate
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
10 11
COMBINATION BLADES FLOATING BLADES
Pow
er
Trow
el B
lade
s
Pow
er Tro
wel B
lades
S36-10
Use on 36” Bartell and Wacker machines.
Fixed with 5/16” uNC HT bolts – lengths vary
Blade size – 355mm x 190mm
Weight – 7Kg per set of 4 blades
Packed – 1 Set per bundle
Combination Blades – designed to be used for both initial floating and final finishing
10-66
Use on 34” Master Finish machines that are equipped to receive it.
Fit using 10-62 countersunk square neck screw and 10-63 nut
Blade size – 322mm x 187mm
Weight – 5Kg per set of 4 blades
Packed – 2 Sets per bundle
S34-18
Use on 34” Master Finish machines.
Fixed with 3/8” BSW bolts – lengths are 1½”, 2”, 2½” depending on the model
Blade size – 322mm x 187mm
Weight – 8Kg per set of 4 blades
Packed – 1 Set per bundle
S40-18
Use on 40” Master Finish machines.
Fixed with 3/8” BSW bolts– lengths are 1¼”,1½”, 2”, 2½” depending on the model
Blade size – 375mm x 202mm
Weight – 9Kg per set of 4 blades
Packed – 1 Set per bundle
10-69
Use on 40” Master Finish machines that are equipped to receive it.
Fit using 10-62 countersunk square neck screw and 10-63 nut.
Blade size – 375mm x 200mm
Weight – 6Kg per set of 4 blades
Packed – 2 Sets per bundle
S46-18
Use on 46” & 48” Master Finish, Bartell and Wacker machines.
Fixed with 5/16” uNC HT bolts – lengths vary
Blade size – 450mm x 187mm
Weight – 10Kg per set of 4 blades
Packed – 1 Set per bundle
Floating Blades – These blades are designed to clip over the finishing blades and are used for initial floating of the concrete floor. Blade styles, FB34, FB40 are manufactured in two parts that bolt together, this allows the reuse of the top plate after the wear plate has worn out.
NB. Spare bolt and nut sets – 8 off – part number ‘FBBS’
(wear plate not shown) FB40
Clips over D40-2 finishing blade
Blade size – 375mm x 230mm
Weight – 10 Kg per set of 4 blades
Packed – 1 Set per bundle
Replacement wear plate FB40WP
Weight – 6.5 Kg per set of 4 blades
Packed - 2 sets per bundle
10-68
Fits over D40-2 finishing blade and is secured by wire tie around blade arm of the machine
Blade size – 375mm x 202mm
Weight – 7.5 Kg per set of 4 blades
Packed – 1 Set per bundle
BF36
Fits over D36-2 finishing blade and is secured by clip over blade bar
Blade Size – 260 x 355mm
Weight – 8kg
Packed – 4 blades
BF48
Fits over D46-2 finishing blade and is secured by clip over blade bar
Blade Size – 260 x 455mm
Weight – 12kg
Packed – 4 blades
FB34
Clips over D34-3 finishing blade
Blade size – 330mm x 202mm
Weight – 10 Kg per set of 4 blades
Packed – 1 Set per bundle
Replacement wear plate FB34WP
Weight – 6 Kg per set of 4 blades
Packed - 2 sets per bundle
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
10 11
COMBINATION BLADES FLOATING BLADES
Pow
er
Trow
el B
lade
s
Pow
er Tro
wel B
lades
S36-10
Use on 36” Bartell and Wacker machines.
Fixed with 5/16” uNC HT bolts – lengths vary
Blade size – 355mm x 190mm
Weight – 7Kg per set of 4 blades
Packed – 1 Set per bundle
Combination Blades – designed to be used for both initial floating and final finishing
10-66
Use on 34” Master Finish machines that are equipped to receive it.
Fit using 10-62 countersunk square neck screw and 10-63 nut
Blade size – 322mm x 187mm
Weight – 5Kg per set of 4 blades
Packed – 2 Sets per bundle
S34-18
Use on 34” Master Finish machines.
Fixed with 3/8” BSW bolts – lengths are 1½”, 2”, 2½” depending on the model
Blade size – 322mm x 187mm
Weight – 8Kg per set of 4 blades
Packed – 1 Set per bundle
S40-18
Use on 40” Master Finish machines.
Fixed with 3/8” BSW bolts– lengths are 1¼”,1½”, 2”, 2½” depending on the model
Blade size – 375mm x 202mm
Weight – 9Kg per set of 4 blades
Packed – 1 Set per bundle
10-69
Use on 40” Master Finish machines that are equipped to receive it.
Fit using 10-62 countersunk square neck screw and 10-63 nut.
Blade size – 375mm x 200mm
Weight – 6Kg per set of 4 blades
Packed – 2 Sets per bundle
S46-18
Use on 46” & 48” Master Finish, Bartell and Wacker machines.
Fixed with 5/16” uNC HT bolts – lengths vary
Blade size – 450mm x 187mm
Weight – 10Kg per set of 4 blades
Packed – 1 Set per bundle
Floating Blades – These blades are designed to clip over the finishing blades and are used for initial floating of the concrete floor. Blade styles, FB34, FB40 are manufactured in two parts that bolt together, this allows the reuse of the top plate after the wear plate has worn out.
NB. Spare bolt and nut sets – 8 off – part number ‘FBBS’
(wear plate not shown) FB40
Clips over D40-2 finishing blade
Blade size – 375mm x 230mm
Weight – 10 Kg per set of 4 blades
Packed – 1 Set per bundle
Replacement wear plate FB40WP
Weight – 6.5 Kg per set of 4 blades
Packed - 2 sets per bundle
10-68
Fits over D40-2 finishing blade and is secured by wire tie around blade arm of the machine
Blade size – 375mm x 202mm
Weight – 7.5 Kg per set of 4 blades
Packed – 1 Set per bundle
BF36
Fits over D36-2 finishing blade and is secured by clip over blade bar
Blade Size – 260 x 355mm
Weight – 8kg
Packed – 4 blades
BF48
Fits over D46-2 finishing blade and is secured by clip over blade bar
Blade Size – 260 x 455mm
Weight – 12kg
Packed – 4 blades
FB34
Clips over D34-3 finishing blade
Blade size – 330mm x 202mm
Weight – 10 Kg per set of 4 blades
Packed – 1 Set per bundle
Replacement wear plate FB34WP
Weight – 6 Kg per set of 4 blades
Packed - 2 sets per bundle
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
12 13
FINISHING BLADES
Pow
er
Trow
el B
lade
s
Finishing Blades – These blades are manufactured from hardened and tempered carbon steel and are used where a finer finish is required on the concrete, for example, warehouse floors. The blades are reversible so that when the edge is worn, they may be turned around for a second use.
D34-3
Use on 34” Master Finish machines.
Fit using 3/8” BSW bolts.
Blade size – 324mm x 152mm
Weight – 4.5 Kg per set of 4 blades
Packed – 1 Set per bundle
D46-2
Use on 46” & 48” Master Finish, Bartell and Wacker machines.
Fixed with 5/16” uNC HT bolts – lengths vary
Blade size – 455mm x 152mm
Weight – 6 Kg per set of 4 blades
Packed – 1 Set per bundle
D40-2
Use on 40” Master Finish machines.
Fixed with 3/8” BSW bolts.
Blade size – 375mm x 202mm
Weight – 6 Kg per set of 4 blades
Packed – 1 Set per bundle
D36-2
Use on 36” Bartell and Wacker machines.
Fixed with 5/16” uNC HT bolts – lengths vary
Blade size – 355mm x 152mm
Weight – 4.25 Kg per set of 4 blades
Packed – 1 Set per bundle
USING DUAL BLADE SYSTEM
Remove float bladeFinish floor using reversible finishing blade
Float blade clipped to finishing blade for initial floating of floor
“24” TROWEL MACHINE
“TS SERIES” TROWEL MACHINE
Pow
er Tro
wels
description HP Ring diameter Weight Blade Choice Model Code
24” 6.5 610mm 67kg T600FB T600M
description HP Ring diameter Weight Blade Choice Model Code
34” 6.5 865mm 70kg Combination TS34-18
34” 6.5 865mm 72kg Finishing Td34-3
40” 6.5 1016mm 70kg Combination TS40-18
40” 6.5 1016mm 72kg Finishing Td40-2
* Powered by reliable Honda 4 Stroke engine
* Proven MasterFinish design
* local parts and service
* Built in australia for australian conditions
• Combination Blades • Dual Blades
BLADE STYLES
or +
* Height adjustable Handle Bar Stem
* Powered by a reliable Honda 4 Stroke engine
* Heavy duty Gear Box & Base assembly
* Built in australia for australian conditions
* lifting Hook
* local parts and service
* Proven MasterFinish design
24” REPLACEMENT BLADES
T600FB (4 Pack)T600P - Replacement Floating Pan
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
12 13
FINISHING BLADES
Pow
er
Trow
el B
lade
s
Finishing Blades – These blades are manufactured from hardened and tempered carbon steel and are used where a finer finish is required on the concrete, for example, warehouse floors. The blades are reversible so that when the edge is worn, they may be turned around for a second use.
D34-3
Use on 34” Master Finish machines.
Fit using 3/8” BSW bolts.
Blade size – 324mm x 152mm
Weight – 4.5 Kg per set of 4 blades
Packed – 1 Set per bundle
D46-2
Use on 46” & 48” Master Finish, Bartell and Wacker machines.
Fixed with 5/16” uNC HT bolts – lengths vary
Blade size – 455mm x 152mm
Weight – 6 Kg per set of 4 blades
Packed – 1 Set per bundle
D40-2
Use on 40” Master Finish machines.
Fixed with 3/8” BSW bolts.
Blade size – 375mm x 202mm
Weight – 6 Kg per set of 4 blades
Packed – 1 Set per bundle
D36-2
Use on 36” Bartell and Wacker machines.
Fixed with 5/16” uNC HT bolts – lengths vary
Blade size – 355mm x 152mm
Weight – 4.25 Kg per set of 4 blades
Packed – 1 Set per bundle
USING DUAL BLADE SYSTEM
Remove float bladeFinish floor using reversible finishing blade
Float blade clipped to finishing blade for initial floating of floor
“24” TROWEL MACHINE
“TS SERIES” TROWEL MACHINE
Pow
er Tro
wels
description HP Ring diameter Weight Blade Choice Model Code
24” 6.5 610mm 67kg T600FB T600M
description HP Ring diameter Weight Blade Choice Model Code
34” 6.5 865mm 70kg Combination TS34-18
34” 6.5 865mm 72kg Finishing Td34-3
40” 6.5 1016mm 70kg Combination TS40-18
40” 6.5 1016mm 72kg Finishing Td40-2
* Powered by reliable Honda 4 Stroke engine
* Proven MasterFinish design
* local parts and service
* Built in australia for australian conditions
• Combination Blades • Dual Blades
BLADE STYLES
or +
* Height adjustable Handle Bar Stem
* Powered by a reliable Honda 4 Stroke engine
* Heavy duty Gear Box & Base assembly
* Built in australia for australian conditions
* lifting Hook
* local parts and service
* Proven MasterFinish design
24” REPLACEMENT BLADES
T600FB (4 Pack)T600P - Replacement Floating Pan
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
14 15
Pow
er
Trow
els
* Powered by reliable Honda 4 Stroke engine
* Proven MasterFinish design
* Heavy duty Gear Box & Base assembly
* lifting Hook
* local parts and service
* Built in australia for australian conditions
“48” TROWEL MACHINE
Concre
te G
rinder
description HP Ring diameter Weight Blade Choice Model Code
48” 9 1220mm 106kg Combination 9HS46-18
48” 9 1200mm 106kg Finishing 9Hd46-2
CONCRETE & TERAZZO FLOOR GRINDING MACHINE
Complete ease of control achieved by using the finger light wheel height adjustment
Powered by 2 HP Single phase electric motor which can be connected to normal household supply.
Fitted with 25mtr, 25amp electric cable
Two men can handle the machine onto the most awkward job site
Minimum maintenance - 2 greasing points only
Can be fitted with a variety of disks to suit most types of abrasive segments. (Standard disc as illustrated - self locking wedge segments).
Robust fabricated steel construction
Supplied with fabric dust shield
a vacuum hose can be connected to the machine to remove any air-born dust
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8) (9)
Specifications:
Code G1 - a
Weight 85 kg
disc Speed 360 rpm
disc diameter 360 mm
overall size (mm) 940 x 520 x 950
Carb Grinding Block
diamond Grinding Block
(029) (d/RuBS)
• Lifting bracket included
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Powered byAdvanced 4 Stroke Technology
applications
large concrete pourscoving or steel Finishes
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
14 15
Pow
er
Trow
els
* Powered by reliable Honda 4 Stroke engine
* Proven MasterFinish design
* Heavy duty Gear Box & Base assembly
* lifting Hook
* local parts and service
* Built in australia for australian conditions
“48” TROWEL MACHINE
Concre
te G
rinder
description HP Ring diameter Weight Blade Choice Model Code
48” 9 1220mm 106kg Combination 9HS46-18
48” 9 1200mm 106kg Finishing 9Hd46-2
CONCRETE & TERAZZO FLOOR GRINDING MACHINE
Complete ease of control achieved by using the finger light wheel height adjustment
Powered by 2 HP Single phase electric motor which can be connected to normal household supply.
Fitted with 25mtr, 25amp electric cable
Two men can handle the machine onto the most awkward job site
Minimum maintenance - 2 greasing points only
Can be fitted with a variety of disks to suit most types of abrasive segments. (Standard disc as illustrated - self locking wedge segments).
Robust fabricated steel construction
Supplied with fabric dust shield
a vacuum hose can be connected to the machine to remove any air-born dust
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8) (9)
Specifications:
Code G1 - a
Weight 85 kg
disc Speed 360 rpm
disc diameter 360 mm
overall size (mm) 940 x 520 x 950
Carb Grinding Block
diamond Grinding Block
(029) (d/RuBS)
• Lifting bracket included
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Powered byAdvanced 4 Stroke Technology
applications
large concrete pourscoving or steel Finishes
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
16 17
Dri
ve U
nits
Pum
ps &
Shafts
* MasterFinish flexible shaft driven heavy duty pumps are portable and can be used in a variety of applications
* available as standard premium aluminium pump or heavy duty cast iron model – both with Stainless Steel Impeller for improved abrasion resistance
* Self Priming, choke resistant, stainless steel spindle, and oil bath lubrication
* Fitted with a quick action flexshaft coupling with a 3 tooth drive dog enabling them to be operated by all standard drive units
* Fitted with an adaptor for camlock quick action hose fittings
application: General purpose slabs, precast panels, bridge culverts
MasterFinish flexible vibrations shafts provide high frequency vibration from a low flexshaft speed. Manufactured at a standard 6 metre length, the pendulum tip vibrator generates a high frequency vibration driving out entrapped air, providing improved compaction, strength and finish of concrete. (3m extension shaft available KSeS)
Features:
* Heavy duty 3 dog drive coupling
* Quick action flexshaft connection from petrol, electric and diesel drive units
Specifications:
Model KS212
Type aluminium Pump
Weight 32kg
Impeller Stainless Steel
Specifications:
Model KS212CI
Type Cast Iron H/duty Pump
Weight 42kg
Impeller Stainless Steel
Specifications:
Code Size” Size mm
KSV-2 1 ¼ 32
KSV-3 1 ½ 38
KSV-4 1 ¾ 44
KSV-5 2 50
KSV-57 2 ¼ 57
KSV-6 2 ½ 62
SUBMERSIBLE PUMP
FLEXIBLE VIBRATIONS SHAFTS
an
ti KinK pRotEction
* dished steel base for mobility
* Honda GX160 4-stroke Motor
* Spring Mounted engine isolation vibrators
DRIVE UNIT
“SPRING MOUNT”DRIVE UNIT
Type engine Weight Speed Model No.
drive unit GX160 4-Stroke 31kg 3000rpm Hd5
Type engine Weight Speed Model No.
Spring Mount drive unit GX160 30kg 3000rpm K1620
anti-Vibe Engine Mount
Quick connection
Removable Frame
* New improved coupling design
* external coupling spring to allow easy operation and maintenance
* New engine mounting for reduced vibration
* Compact design allows easier handling
* Roll resistant design
Quick connection
anti-Vibe Engine Mount
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
16 17
Dri
ve U
nits
Pum
ps &
Shafts
* MasterFinish flexible shaft driven heavy duty pumps are portable and can be used in a variety of applications
* available as standard premium aluminium pump or heavy duty cast iron model – both with Stainless Steel Impeller for improved abrasion resistance
* Self Priming, choke resistant, stainless steel spindle, and oil bath lubrication
* Fitted with a quick action flexshaft coupling with a 3 tooth drive dog enabling them to be operated by all standard drive units
* Fitted with an adaptor for camlock quick action hose fittings
application: General purpose slabs, precast panels, bridge culverts
MasterFinish flexible vibrations shafts provide high frequency vibration from a low flexshaft speed. Manufactured at a standard 6 metre length, the pendulum tip vibrator generates a high frequency vibration driving out entrapped air, providing improved compaction, strength and finish of concrete. (3m extension shaft available KSeS)
Features:
* Heavy duty 3 dog drive coupling
* Quick action flexshaft connection from petrol, electric and diesel drive units
Specifications:
Model KS212
Type aluminium Pump
Weight 32kg
Impeller Stainless Steel
Specifications:
Model KS212CI
Type Cast Iron H/duty Pump
Weight 42kg
Impeller Stainless Steel
Specifications:
Code Size” Size mm
KSV-2 1 ¼ 32
KSV-3 1 ½ 38
KSV-4 1 ¾ 44
KSV-5 2 50
KSV-57 2 ¼ 57
KSV-6 2 ½ 62
SUBMERSIBLE PUMP
FLEXIBLE VIBRATIONS SHAFTSa
nti KinK pRotEction
* dished steel base for mobility
* Honda GX160 4-stroke Motor
* Spring Mounted engine isolation vibrators
DRIVE UNIT
“SPRING MOUNT”DRIVE UNIT
Type engine Weight Speed Model No.
drive unit GX160 4-Stroke 31kg 3000rpm Hd5
Type engine Weight Speed Model No.
Spring Mount drive unit GX160 30kg 3000rpm K1620
anti-Vibe Engine Mount
Quick connection
Removable Frame
* New improved coupling design
* external coupling spring to allow easy operation and maintenance
* New engine mounting for reduced vibration
* Compact design allows easier handling
* Roll resistant design
Quick connection
anti-Vibe Engine Mount
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
18 19
Sho
vels
& R
eo J
ack
Handy V
ibes
“DELUXE” HANDY VIBE
HANDY VIBE
Type engine Weight Frequency Model No.
Hard Nose (44mm) GX35 4-Stroke 13kg 9000 (Vib/Min) HV44
Hard Nose (44mm) GX35 4-Stroke 12kg 9000 (Vib/Min) HV44e (no cage)
Resilient Nose (44mm) GX35 4-Stroke 13kg 9000 (Vib/Min) HV44RN
Type engine Weight Frequency Model No.
Hard Nose (25mm) GX35 4-Stroke 9kg 9000 (Vib/Min) PV25
safe-t-Cage engine Protection
Model: PV25
engine - GX35 Honda
Type: Hard Nose - fully flexible shaft
Frequency: 9000 (Vib/Min)
Weight: 9kg
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
ReSILIeNT TIP
* Powered by Honda’s lightweight 4-Stroke, the HandyVibe makes vibrating concrete simple and convenient.
* Safe-T-Cage unique protective system, reduces chances of damage to engine.
* No additional requirement for separate drive unit or shaft.
* ultra-reliable Honda 4-Stroke engine with no mixing of fuel required.
* ergonomic designed handles and shoulder strap.
D HANDLE STEEL SHOVELS
REO JACK
• Made from recycled railway steel
• Eco-friendly
• Strong Light weight design
• Powder coated finish
• Heavy Duty
Code Size
MFYSl 43”
MFWSS 39”
MFYSl
MFWSS
Code Weight
Rl 1.3kg
• For safer & easier placing of reo bar chairs.
• Design to reduce the strain on contractors back.
• Improves efficiency - one man operation.
• Heavy duty construction and lifting hook.
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
18 19
Sho
vels
& R
eo J
ack
Handy V
ibes
“DELUXE” HANDY VIBE
HANDY VIBE
Type engine Weight Frequency Model No.
Hard Nose (44mm) GX35 4-Stroke 13kg 9000 (Vib/Min) HV44
Hard Nose (44mm) GX35 4-Stroke 12kg 9000 (Vib/Min) HV44e (no cage)
Resilient Nose (44mm) GX35 4-Stroke 13kg 9000 (Vib/Min) HV44RN
Type engine Weight Frequency Model No.
Hard Nose (25mm) GX35 4-Stroke 9kg 9000 (Vib/Min) PV25
safe-t-Cage engine Protection
Model: PV25
engine - GX35 Honda
Type: Hard Nose - fully flexible shaft
Frequency: 9000 (Vib/Min)
Weight: 9kg
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
ReSILIeNT TIP
* Powered by Honda’s lightweight 4-Stroke, the HandyVibe makes vibrating concrete simple and convenient.
* Safe-T-Cage unique protective system, reduces chances of damage to engine.
* No additional requirement for separate drive unit or shaft.
* ultra-reliable Honda 4-Stroke engine with no mixing of fuel required.
* ergonomic designed handles and shoulder strap.
D HANDLE STEEL SHOVELS
REO JACK
• Made from recycled railway steel
• Eco-friendly
• Strong Light weight design
• Powder coated finish
• Heavy Duty
Code Size
MFYSl 43”
MFWSS 39”
MFYSl
MFWSS
Code Weight
Rl 1.3kg
• For safer & easier placing of reo bar chairs.
• Design to reduce the strain on contractors back.
• Improves efficiency - one man operation.
• Heavy duty construction and lifting hook.
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
20 21
EA
SY
MIX
Reo C
utte
rs & B
enders
• Most popular and widely used with all purpose cuts
• Adaptable from soft to medium hard materials
• Quick and easy cut of reinforcing rods and bolts
• Blades are drop forged from alloy tool steel
• Carefully heat-treated for maximum strength and wear resistance
• Unique side adjustment of blades for accuracy
• All tubular handles with ductile handles
• Made in Japan
• 16mm Capacity
• Specifically designed for cutting and precision bending of reinforcing rods
• 90°, 135°, 180° bending of reinforcing rods can be achieved
• Blades are drop forged from alloy tool steel
• Tool can be bolted to floor or timber board for easy operation
• Made in Japan
BOLT CUTTERS550 POWERPLATE COMPACTOR
2.2 CFT MIXER
WHEEL BARROW
3.5 CFT MIXER
REO CUTTER BENDER
Part No. length Weight Cutting Capacity Spare Blade
mm (inch) kg 80 HRB Rod 20 HRC Rod 36 HRC Rod no.
BC0760 600 (24”) 2.5 10 10 8 BCe-0060
BC0775 750 (30”) 3.85 13 13 10 BCe-0075
BCo790 900 (36”) 5.9 16 14 11 BCe-0090
BCo710 1050 (42”) 8.05 18 16 13 BCe-0010
Part No. length Weight Max Capacity Spare Blade
mm (inch) kg for 590N/mm no.
SCB-16 1250 (50”) 17 16 (5/8”) SCBe-16
BC0760
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Tray: 1.6 steel wired edge, concealed fixings bolted with Nyloc nuts.
Wheel size: 2mm steel powder coated. 16.650 x 8 c/w precision ground sealed bearings.
Tyre size: 16.650 x 8.4 ply nylon.
option: steel handles – S. Timber handles – T. Weight 27kg
Height (inc. handle): 1150 mm
Width: 500 mm
Plate width: 500 mm
Plate length: 550 mm
Total weight: 82kg
Vibrating system: ecentric Rotation
Centrifugal force: 1500 kg (21KN)
Travel speed: 20 metres/minute
Hill climbing ability: 20 degrees (approx)
• Ball bearing head for pinion & bowl.
• Cast iron drive pinion and ring gear.
• Steel wheels on heavy duty axles.
• Leak-free seam-welded bowl.
• 9 heavy duty beaters.
• Polyethylene safety covers.
• 400 x 8 Pneumatic tyres.
• Petrol or 550 W electric motor.
• Weight without motor 110kg.
These heavy duty mixers are percision engineered throughout and have set the standard for the construction industry. They are easy to handle and when fitted with telescopic axle, can pass through standard doorways.
• Heavy duty tubular steel frame,
• Maintenance free ball bearing head for pinion and bowl.
• Seam welded bowl
• Bowl contains six heavy duty beaters
• Polymer motor covers
• High strength polymer wheels on heavy duty axles
• 330 watt electric motor
Code Weight
e550 82kg
Code Weight
W600 27kg
Code description
eP22-4 2.2 CFT electric Motor
Code description
eP35-4 3.5 CFT electric Motor
eP35H 3.5 CFT Honda Motor
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
20 21
EA
SY
MIX
Reo C
utte
rs & B
enders
• Most popular and widely used with all purpose cuts
• Adaptable from soft to medium hard materials
• Quick and easy cut of reinforcing rods and bolts
• Blades are drop forged from alloy tool steel
• Carefully heat-treated for maximum strength and wear resistance
• Unique side adjustment of blades for accuracy
• All tubular handles with ductile handles
• Made in Japan
• 16mm Capacity
• Specifically designed for cutting and precision bending of reinforcing rods
• 90°, 135°, 180° bending of reinforcing rods can be achieved
• Blades are drop forged from alloy tool steel
• Tool can be bolted to floor or timber board for easy operation
• Made in Japan
BOLT CUTTERS550 POWERPLATE COMPACTOR
2.2 CFT MIXER
WHEEL BARROW
3.5 CFT MIXER
REO CUTTER BENDER
Part No. length Weight Cutting Capacity Spare Blade
mm (inch) kg 80 HRB Rod 20 HRC Rod 36 HRC Rod no.
BC0760 600 (24”) 2.5 10 10 8 BCe-0060
BC0775 750 (30”) 3.85 13 13 10 BCe-0075
BCo790 900 (36”) 5.9 16 14 11 BCe-0090
BCo710 1050 (42”) 8.05 18 16 13 BCe-0010
Part No. length Weight Max Capacity Spare Blade
mm (inch) kg for 590N/mm no.
SCB-16 1250 (50”) 17 16 (5/8”) SCBe-16
BC0760
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Tray: 1.6 steel wired edge, concealed fixings bolted with Nyloc nuts.
Wheel size: 2mm steel powder coated. 16.650 x 8 c/w precision ground sealed bearings.
Tyre size: 16.650 x 8.4 ply nylon.
option: steel handles – S. Timber handles – T. Weight 27kg
Height (inc. handle): 1150 mm
Width: 500 mm
Plate width: 500 mm
Plate length: 550 mm
Total weight: 82kg
Vibrating system: ecentric Rotation
Centrifugal force: 1500 kg (21KN)
Travel speed: 20 metres/minute
Hill climbing ability: 20 degrees (approx)
• Ball bearing head for pinion & bowl.
• Cast iron drive pinion and ring gear.
• Steel wheels on heavy duty axles.
• Leak-free seam-welded bowl.
• 9 heavy duty beaters.
• Polyethylene safety covers.
• 400 x 8 Pneumatic tyres.
• Petrol or 550 W electric motor.
• Weight without motor 110kg.
These heavy duty mixers are percision engineered throughout and have set the standard for the construction industry. They are easy to handle and when fitted with telescopic axle, can pass through standard doorways.
• Heavy duty tubular steel frame,
• Maintenance free ball bearing head for pinion and bowl.
• Seam welded bowl
• Bowl contains six heavy duty beaters
• Polymer motor covers
• High strength polymer wheels on heavy duty axles
• 330 watt electric motor
Code Weight
e550 82kg
Code Weight
W600 27kg
Code description
eP22-4 2.2 CFT electric Motor
Code description
eP35-4 3.5 CFT electric Motor
eP35H 3.5 CFT Honda Motor
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
22 23
High strength, light weight aluminum mounting. Compression fit stainless steel rivets.
each blade is cross ground to just the right dimension for that perfect "Broken-in" feel.
Guaranteed "No TuRN" handle design locks handle to mounting.
Comfortable ProForm® Handle with a special textured ribbing for that "Great Grip".Precision ground edge
for professional finish.
oversized toe rivet for extra strength.
Trowel packaging with unique "open View" design and colorful graphics
ProForm® Trowel Handle (uS PaTeNT #6,247,204 B1)
Tool Size
CF207PF 11”x4”
CF217PF 14”x4”
CF219PF 14”x4-3/4”
CF222PF 16”x4”
CF227PF 18”x4”
CF228PF 18”x4-12”
CF232PF 20”x5”
CF234PF 24”x5”
CARBON STEEL
Tool Size
CF731BPF 14”x4”
CF732BPF 16”x4”
CF729BPF 18”x4”
CF734BPF 20”x5”
CF735BPF 24”x5”
standard
shank
Philadelphia Blade Pattern
WIDE LONDON PATTERN TROWEL PHILADELPHIA PATTERN TROWEL
DIRT TAMPER CONCRETE SLIDERS (knee Boards)BRICK JOINTERS
excellent way to tamp dirt surfaces. Cast iron tamper fitted with a 44” hardwood handle.
Made of lightweight, tough heavy-duty polystyrene plastic. easy to use, easy to clean. one size fits all. Knee pads are replaceable.
each end makes a different size joint. overall length 10-1/2”.
W.R
ose
Bri
ck T
row
els
& T
ools
Dry
wall H
aw
ks
Concre
te Fin
ishin
g Tro
wels
standard
shank
Wide London Blade Pattern
Tool Blade Size Heel Width
Ro112-12SHPF 12” 5-13/16”
Tool Blade Size Heel Width
Ro110-12SHPF 12” 5-9/16”
Tool Size Weight
CC926 10”x10” 14 lbs.
Tool Size
CC153 (Pair) 30”x10”
Tool Size
Bl260 3/8”x1/2”
Bl261 1/2”x5/8”
Bl262 5/8”x3/4”
Bl264 3/4”x7/8”
Bl265 7/8”x1”
Wide london Pattern with ProForm® Grip
(Ro112-12SHPF)
Philadelphia Pattern with ProForm® Grip
(Ro110-12SHPF)
dirt TamperCast Iron Base
(CC926)
Made of high carbon steel
JUMBO UTILITY BRUSH
PRO MAG DRYWALL HAWKS
This red handle utility brush is a must for any professional. long wearing, white tampico fibres can be used on masonry, brick, tile and stone. a truly versatile brush.
Comfortable ProForm® handle with special textured ribbing for that “Great Grip”. Fitted with 1/2” thick sponge rubber hand protector.
Tool Size
Bl526 6-1/2”x2”x4”
Tool Size
Pl266PF 16”x16”
Pl264PF 14”x14”
Pl263PF 13”x13”
SKATE WHEEL JOINT RAKER
(Bl210)
Masons love this big wheeled joint raker. Wheels are 1-3/4” in diameter, mounted 1-3/4” apart. overall width is 3”. Has 8-1/2” aluminum handle that is squared off at the end so you can rod joints. Hardened nail is adjusted for depth.
TM
30% lighter than aluminum
Pl250PF Replacement Handle
Pl249 extra 1/2" callous preventer (sponge rubber) will fit any hawk
ALUMINUM DRYWALL HAWKS
Heavy-duty aluminum hawk, fitted with comfortable ProForm® handle. Smooth straight edges with rounded corners.
Tool Size
Pl513PF 13”x13”
Pl512PF 12”x12”
Pl510PF 10”x10”
US Patent # D508 638
High quality blue steel with additional flexibility. Forged aluminum shank.
BLUE STEEL
High quality heat treated Swedish stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shank
Heat treated golden stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shank.
SWEDISH STAINLESS STEEL GOLDEN STAINLESS STEEL
Tool Size
CF742PF 12”x4”
CF744PF 14”x4”
Tool Size
CF540PF 14”x4-3/4”
CF549PF 20”x5”
WITH PROFORM® HANDLE
CONCRETE FINISH TROWELS
Precision BalancedBroken-in & Ready to UseProfessional Quality
(CC153)
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
22 23
High strength, light weight aluminum mounting. Compression fit stainless steel rivets.
each blade is cross ground to just the right dimension for that perfect "Broken-in" feel.
Guaranteed "No TuRN" handle design locks handle to mounting.
Comfortable ProForm® Handle with a special textured ribbing for that "Great Grip".Precision ground edge
for professional finish.
oversized toe rivet for extra strength.
Trowel packaging with unique "open View" design and colorful graphics
ProForm® Trowel Handle (uS PaTeNT #6,247,204 B1)
Tool Size
CF207PF 11”x4”
CF217PF 14”x4”
CF219PF 14”x4-3/4”
CF222PF 16”x4”
CF227PF 18”x4”
CF228PF 18”x4-12”
CF232PF 20”x5”
CF234PF 24”x5”
CARBON STEEL
Tool Size
CF731BPF 14”x4”
CF732BPF 16”x4”
CF729BPF 18”x4”
CF734BPF 20”x5”
CF735BPF 24”x5”
standard
shank
Philadelphia Blade Pattern
WIDE LONDON PATTERN TROWEL PHILADELPHIA PATTERN TROWEL
DIRT TAMPER CONCRETE SLIDERS (knee Boards)BRICK JOINTERS
excellent way to tamp dirt surfaces. Cast iron tamper fitted with a 44” hardwood handle.
Made of lightweight, tough heavy-duty polystyrene plastic. easy to use, easy to clean. one size fits all. Knee pads are replaceable.
each end makes a different size joint. overall length 10-1/2”.
W.R
ose
Bri
ck T
row
els
& T
ools
Dry
wall H
aw
ks
Concre
te Fin
ishin
g Tro
wels
standard
shank
Wide London Blade Pattern
Tool Blade Size Heel Width
Ro112-12SHPF 12” 5-13/16”
Tool Blade Size Heel Width
Ro110-12SHPF 12” 5-9/16”
Tool Size Weight
CC926 10”x10” 14 lbs.
Tool Size
CC153 (Pair) 30”x10”
Tool Size
Bl260 3/8”x1/2”
Bl261 1/2”x5/8”
Bl262 5/8”x3/4”
Bl264 3/4”x7/8”
Bl265 7/8”x1”
Wide london Pattern with ProForm® Grip
(Ro112-12SHPF)
Philadelphia Pattern with ProForm® Grip
(Ro110-12SHPF)
dirt TamperCast Iron Base
(CC926)
Made of high carbon steel
JUMBO UTILITY BRUSH
PRO MAG DRYWALL HAWKS
This red handle utility brush is a must for any professional. long wearing, white tampico fibres can be used on masonry, brick, tile and stone. a truly versatile brush.
Comfortable ProForm® handle with special textured ribbing for that “Great Grip”. Fitted with 1/2” thick sponge rubber hand protector.
Tool Size
Bl526 6-1/2”x2”x4”
Tool Size
Pl266PF 16”x16”
Pl264PF 14”x14”
Pl263PF 13”x13”
SKATE WHEEL JOINT RAKER
(Bl210)
Masons love this big wheeled joint raker. Wheels are 1-3/4” in diameter, mounted 1-3/4” apart. overall width is 3”. Has 8-1/2” aluminum handle that is squared off at the end so you can rod joints. Hardened nail is adjusted for depth.
TM
30% lighter than aluminum
Pl250PF Replacement Handle
Pl249 extra 1/2" callous preventer (sponge rubber) will fit any hawk
ALUMINUM DRYWALL HAWKS
Heavy-duty aluminum hawk, fitted with comfortable ProForm® handle. Smooth straight edges with rounded corners.
Tool Size
Pl513PF 13”x13”
Pl512PF 12”x12”
Pl510PF 10”x10”
US Patent # D508 638
High quality blue steel with additional flexibility. Forged aluminum shank.
BLUE STEEL
High quality heat treated Swedish stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shank
Heat treated golden stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shank.
SWEDISH STAINLESS STEEL GOLDEN STAINLESS STEEL
Tool Size
CF742PF 12”x4”
CF744PF 14”x4”
Tool Size
CF540PF 14”x4-3/4”
CF549PF 20”x5”
WITH PROFORM® HANDLE
CONCRETE FINISH TROWELS
Precision BalancedBroken-in & Ready to UseProfessional Quality
(CC153)
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
24 25
Tool Size Shank
CF274PF 10”x3” 3”
CF276PF 12”x3-1/2” 4-3/8”
CF277PF 14”x4” 6”
CF279PF 16”x4” 7-5/8”
ProForm® Handle
ProForm® Handle
ProForm® Handle
ProForm® Handle
ProForm® Handle
ProForm® Handle
ProForm® Handle
Pool &
Dry
wall T
row
els
Trow
els a
nd B
ullfl
oats
Mech
anism
s
Short shank, more flexible blade
extra hard troweling blade for long wear. Hardened chrome surface great for pool work. eliminates burn marks. exposed rivets for extra strength. Forged aluminum shanks.
POOL TROWELS
DRYWALL TROWELS
Tool Size Shank
CF274BPF 10”x3” 3”
CF276BPF 12”x3-1/2” 4-3/8”
CF277BPF 14”x4” 6”
CF279BPF 16”x4” 7-5/8”
CF292BPF 18”x5” 9-5/8”
CF295BPF 20”x5” 11-5/8”
Tool Size Shank
CF745BPF 24”x4” 15-5/8”
CF746BPF 24”x5” 15-5/8”
long shank, less flexible blade
Made of heat treated swedish stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shanks.
Made of heat treated golden stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shanks.
BLUE STEEL – SHORT SHANKS
CARBON STEEL
CHROME (NO BURN)
BLUE STEEL – LONG SHANKS
SWEDISH STAINLESS STEEL
GOLDEN STAINLESS STEEL – SHORT SHANKS
GOLDEN STAINLESS STEEL
Tool Size Shank
CF490PF 10”x3” 3-1/2”
Tool Size
Pl447PF 11”x4-3/4”
Tool Size
Pl547PF 11”x4-3/4”
Tool Size
Pl455PF 11”x4-3/4”
ProForm® Trowel Handle (uS PaTeNT #6,247,204 B1)
CARBON STEEL PIPE TROWEL
BULLFLOAT MECHANISMS
CARBON STEEL MIDGET TROWEL
Finish hard to get places in half the time, with half the effort. The offset handle lets you slip the trowel between pipes: the long nose makes it easy to get behind fixtures.
Great for window sills, closets and small areas. Carry one in your tool bag for those tough jobs.
ProForm® handle
ProForm® handle
Tool Size
Pl407PF 8”x3”
Tool Size
Pl501PF 10-1/2”x3”
ProForm® Trowel Handle (uS PaTeNT #6,247,204 B1)
Orbit-R
rbit-R
rbit-R
TILT BRACKET
ALL DOUBLE ACTION TILT BRACKETS...ACCEPT HANDLES INSIDE OR OUT.
1-3/8" handle fits inside
1-3/4" handle fits outside
BRONCOTM TILT
Made of rugged lightweight aluminum. Pitch of blade controlled by turning handle. eliminates bending and lifting. designed to fit all 2 or 4 hole metal bull floats. No adapter needed.
Patent #4,856,932
(CC280)
Ezy-TILT®
Made of rugged lightweight aluminum. Pitch of blade controlled by turning handle. eliminates bending and lifting. Fits only 2 hole metal bull floats. Converter plate (CC287) required when mounting to 4 hole metal bull float.
(CC290)KNUCKLEHEAD® IIBULL FLOAT BRACKETFits all 2 or 4 hole metal bull floats. No adapter needed.
LIGHTER DESIGN HELPS TO ELIMINATE CONCRETE BUILD UP!
Fits 1-3/4" or 1-3/8" button
handles
Made of rugged lightweight aluminum. one to one turning ratio of handle and pitch of blade. Protected grease reservoir for longer wear. Turning handle eliminates bending and lifting.
Knucklehead® II Rebuild Kit. Includes plastic bushing and snap rings.
uS PaTeNT #4,335,485
(CC296K)
“THE ORIGINAL” WITH NEW AND IMPROVED DESIGN
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
24 25
Tool Size Shank
CF274PF 10”x3” 3”
CF276PF 12”x3-1/2” 4-3/8”
CF277PF 14”x4” 6”
CF279PF 16”x4” 7-5/8”
ProForm® Handle
ProForm® Handle
ProForm® Handle
ProForm® Handle
ProForm® Handle
ProForm® Handle
ProForm® Handle
Pool &
Dry
wall T
row
els
Trow
els a
nd B
ullfl
oats
Mech
anism
s
Short shank, more flexible blade
extra hard troweling blade for long wear. Hardened chrome surface great for pool work. eliminates burn marks. exposed rivets for extra strength. Forged aluminum shanks.
POOL TROWELS
DRYWALL TROWELS
Tool Size Shank
CF274BPF 10”x3” 3”
CF276BPF 12”x3-1/2” 4-3/8”
CF277BPF 14”x4” 6”
CF279BPF 16”x4” 7-5/8”
CF292BPF 18”x5” 9-5/8”
CF295BPF 20”x5” 11-5/8”
Tool Size Shank
CF745BPF 24”x4” 15-5/8”
CF746BPF 24”x5” 15-5/8”
long shank, less flexible blade
Made of heat treated swedish stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shanks.
Made of heat treated golden stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shanks.
BLUE STEEL – SHORT SHANKS
CARBON STEEL
CHROME (NO BURN)
BLUE STEEL – LONG SHANKS
SWEDISH STAINLESS STEEL
GOLDEN STAINLESS STEEL – SHORT SHANKS
GOLDEN STAINLESS STEEL
Tool Size Shank
CF490PF 10”x3” 3-1/2”
Tool Size
Pl447PF 11”x4-3/4”
Tool Size
Pl547PF 11”x4-3/4”
Tool Size
Pl455PF 11”x4-3/4”
ProForm® Trowel Handle (uS PaTeNT #6,247,204 B1)
CARBON STEEL PIPE TROWEL
BULLFLOAT MECHANISMS
CARBON STEEL MIDGET TROWEL
Finish hard to get places in half the time, with half the effort. The offset handle lets you slip the trowel between pipes: the long nose makes it easy to get behind fixtures.
Great for window sills, closets and small areas. Carry one in your tool bag for those tough jobs.
ProForm® handle
ProForm® handle
Tool Size
Pl407PF 8”x3”
Tool Size
Pl501PF 10-1/2”x3”
ProForm® Trowel Handle (uS PaTeNT #6,247,204 B1)
Orbit-R
rbit-R
rbit-R
TILT BRACKET
ALL DOUBLE ACTION TILT BRACKETS...ACCEPT HANDLES INSIDE OR OUT.
1-3/8" handle fits inside
1-3/4" handle fits outside
BRONCOTM TILT
Made of rugged lightweight aluminum. Pitch of blade controlled by turning handle. eliminates bending and lifting. designed to fit all 2 or 4 hole metal bull floats. No adapter needed.
Patent #4,856,932
(CC280)
Ezy-TILT®
Made of rugged lightweight aluminum. Pitch of blade controlled by turning handle. eliminates bending and lifting. Fits only 2 hole metal bull floats. Converter plate (CC287) required when mounting to 4 hole metal bull float.
(CC290)KNUCKLEHEAD® IIBULL FLOAT BRACKETFits all 2 or 4 hole metal bull floats. No adapter needed.
LIGHTER DESIGN HELPS TO ELIMINATE CONCRETE BUILD UP!
Fits 1-3/4" or 1-3/8" button
handles
Made of rugged lightweight aluminum. one to one turning ratio of handle and pitch of blade. Protected grease reservoir for longer wear. Turning handle eliminates bending and lifting.
Knucklehead® II Rebuild Kit. Includes plastic bushing and snap rings.
uS PaTeNT #4,335,485
(CC296K)
“THE ORIGINAL” WITH NEW AND IMPROVED DESIGN
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
26 27
Bull F
loat
Bla
des,
Channel Fl
oat,
G
roove
rs&
Bit
s
Butto
n E
xte
nsio
n H
andle
s
BULL FLOATS
TM
add "01" after part number for float less bracket
add "01" after part number for float less bracket
MULTI-RIBBED FOR
EXTRA STRENGTH!
ROUND END BULL FLOAT
CHANNEL FLOATS
lightweight and longer lasting than aluminum alloy. Float blade is “broken-in”, curved and balanced to prevent digging. use with threaded handles. Floats will accept any 4-hole adjustable tilting handle bracket. Complete with 4 hole bracket assembly (CC800).
Great finishing tool - extra strong. Ideal for many jobs, flatwork, paving, etc. Broken-in rounded edges with eZY-Tilt® II bracket.
Tool Size
CC736 36”x8”
CC742 42”x8”
CC803 48”x8”
Tool Size
CC044 48”x6”
Tool Size
Wl069 14”x24”
TM
attaches with two thumbscrews. use bull float as groover. Mount as many groovers as needed. Works on 8" wide bull floats.
Tool Bit depth Radius Width
CC940 3/4” 1/4” 1/2”
CC941 1” 1/4” 1/2”
CC942 1-1/2” 1/4” 1/2”
CC943 2” 1/4” 1/2”
BRONZE BULL FLOAT GROOVER BITS EZ-KNEELER
CauTIoN: Metal extension Handles / adapters should not be used near electrical wiring.
UNIQUE
DESIGN
BUTTON EXTENSION HANDLES
1-3/4" diameter. Swaged Handle.
AluminumButton
SWAGED HANDLES ARE ALUMINUM ANODIZED...PREVENTS HANDS FROM TURNING BLACK CAUSED BY OXIDATION!
Blue Anodized
Tool Size
CC289S 6’ Swaged Handle - Silver anodized
CC289SB 6’ Swaged Handle - Blue anodized
CC293SB 8’ Swaged Handle - Blue anodized
CC291SB 10’ Swaged Handle - Blue anodized
CC336B 6’Swaged Handle - Blue anodized
CauTIoN: Metal extension Handles / adapters should not be used near electrical wiring.
MULTI-TRACBULL FLOAT GROOVER
Produces a uniform sharp groove in various concrete applications where water drainage and traction are critical.
Cuts Perfect Grooves EVERyTIME!
Cuts clean, sharp grooves every time!
TM
Bottom view
End view
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Provides the knees comfortable support and protection. Washable & Chemical resistant. Smooth non marking base. 2” thick rubber cushion.
IDEAL FOR:
• Streets• Highways• Off Ramps • Approach Ramps• Safety Ramps• Bridges
Code description Spacing
CC974 36” x 8” Float 2 ¼ Spacing
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
26 27
Bull F
loat
Bla
des,
Channel Fl
oat,
G
roove
rs&
Bit
s
Butto
n E
xte
nsio
n H
andle
s
BULL FLOATS
TM
add "01" after part number for float less bracket
add "01" after part number for float less bracket
MULTI-RIBBED FOR
EXTRA STRENGTH!
ROUND END BULL FLOAT
CHANNEL FLOATS
lightweight and longer lasting than aluminum alloy. Float blade is “broken-in”, curved and balanced to prevent digging. use with threaded handles. Floats will accept any 4-hole adjustable tilting handle bracket. Complete with 4 hole bracket assembly (CC800).
Great finishing tool - extra strong. Ideal for many jobs, flatwork, paving, etc. Broken-in rounded edges with eZY-Tilt® II bracket.
Tool Size
CC736 36”x8”
CC742 42”x8”
CC803 48”x8”
Tool Size
CC044 48”x6”
Tool Size
Wl069 14”x24”
TM
attaches with two thumbscrews. use bull float as groover. Mount as many groovers as needed. Works on 8" wide bull floats.
Tool Bit depth Radius Width
CC940 3/4” 1/4” 1/2”
CC941 1” 1/4” 1/2”
CC942 1-1/2” 1/4” 1/2”
CC943 2” 1/4” 1/2”
BRONZE BULL FLOAT GROOVER BITS EZ-KNEELER
CauTIoN: Metal extension Handles / adapters should not be used near electrical wiring.
UNIQUE
DESIGN
BUTTON EXTENSION HANDLES
1-3/4" diameter. Swaged Handle.
AluminumButton
SWAGED HANDLES ARE ALUMINUM ANODIZED...PREVENTS HANDS FROM TURNING BLACK CAUSED BY OXIDATION!
Blue Anodized
Tool Size
CC289S 6’ Swaged Handle - Silver anodized
CC289SB 6’ Swaged Handle - Blue anodized
CC293SB 8’ Swaged Handle - Blue anodized
CC291SB 10’ Swaged Handle - Blue anodized
CC336B 6’Swaged Handle - Blue anodized
CauTIoN: Metal extension Handles / adapters should not be used near electrical wiring.
MULTI-TRACBULL FLOAT GROOVER
Produces a uniform sharp groove in various concrete applications where water drainage and traction are critical.
Cuts Perfect Grooves EVERyTIME!
Cuts clean, sharp grooves every time!
TM
Bottom view
End view
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Provides the knees comfortable support and protection. Washable & Chemical resistant. Smooth non marking base. 2” thick rubber cushion.
IDEAL FOR:
• Streets• Highways• Off Ramps • Approach Ramps• Safety Ramps• Bridges
Code description Spacing
CC974 36” x 8” Float 2 ¼ Spacing
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
28 29
Hand F
loats
Hand Flo
ats &
Pry B
ars
MAGNESIUM HAND FLOATS
Superb Floating Action
CONTRACTOR’S CHOICE
MAG FLOATTM
Soft textured ProForm® Handle with special ribbing for that "Great Grip"
Tough durable extru-lite MagnesiumTM blade. Float ends are beveled and the blade is “broken-in” with rounded corners. Precise handle position gives perfect balance.
ProForm® Float Handle
(Patent #6,473,939 B1)(Patent #6,821,468 B2)
MAG FLOAT WITH PROFORM® HANDLE
MAG FLOAT (ROUNDED ENDS)
MAG FLOAT WITH WOOD HANDLE
MAG FLOAT (ROUNDED FRONT & SqUARE BACK)
Tool Size
CF012PF 12”x3-1/4”
CF014PF 14”x3-1/4”
CF016PF 16”x3-1/4”
CF018PF 18”x3-1/4”
CF020PF 20”x3-1/4”
Blade "broken-in"
with beveled ends Blade "broken-in"
with beveled ends
Tool Size
with standard wood handle
CF016 16”x3-1/4”
CF020 20”x3-1/4”
with high lift wood handle
CF014M 14”x3-1/4”
Tough durable extru-lite MagnesiumTM blade. Blades "broken-in" and ready to use. Precise handle position gives this float perfect balance and superb floating action.
Tough durable extru-lite MagnesiumTM blade. Blades "broken-in" and ready to use. Precise handle position gives this float perfect balance and superb floating action.
Tool Size
CF076PF 16”x3-1/4”
Tool Size
CF078PF 16”x3-1/4”
ProForm® handle
ProForm® handle
FLOAT HOOK
“BIG JOHN” & “LITTLE JOHN”HEAVY-DUTY PRY BARS
WIDE MAG FLOAT WITH PROFORM® HANDLE
Tough durable 3-1/2” wide extru-lite MagnesiumTM blade. Precise handle position gives the float perfect balance and superb floating action. Beveled edges and smooth rounded corners gives this float that perfect “broken-in” feel.
MINI MAG FLOAT WITH PROFORM® HANDLE
extra lightweight magnesium wall float. Great tool for floating in small areas or top of wall between forms. Fitted with ProForm®
handle. Blade measures, 7-1/2”x3-1/2”.
(CF663PF)
Tool Size
CF015PF 16”x3-1/2”
TM
ProForm® Float Handle (Patent #6,473,939 B1)(Patent #6,821,468 B2)
Float hook clips to belt. Holds hand floats and other tools.
(CF011)
Blade "broken-in"
with beveled ends
TWOSIZES!
ALL STEEL
Ideal all purpose tool for prying forms and other construction jobs. Specially designed 3” wide blade angle and hardened steel claw make for easy prying.
Name Tool length Weight
“Big John” Pry Bar GG630 56” 14 lbs.
“little John” Pry Bar GG631 46” 7 lbs.
Strong Tubular Handles!
ProForm® Float Handle (Patent #6,473,939 B1)(Patent #6,821,468 B2)
REPLACEMENT FLOAT HANDLES
(CF266)
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
28 29
Hand F
loats
Hand Flo
ats &
Pry B
ars
MAGNESIUM HAND FLOATS
Superb Floating Action
CONTRACTOR’S CHOICE
MAG FLOATTM
Soft textured ProForm® Handle with special ribbing for that "Great Grip"
Tough durable extru-lite MagnesiumTM blade. Float ends are beveled and the blade is “broken-in” with rounded corners. Precise handle position gives perfect balance.
ProForm® Float Handle
(Patent #6,473,939 B1)(Patent #6,821,468 B2)
MAG FLOAT WITH PROFORM® HANDLE
MAG FLOAT (ROUNDED ENDS)
MAG FLOAT WITH WOOD HANDLE
MAG FLOAT (ROUNDED FRONT & SqUARE BACK)
Tool Size
CF012PF 12”x3-1/4”
CF014PF 14”x3-1/4”
CF016PF 16”x3-1/4”
CF018PF 18”x3-1/4”
CF020PF 20”x3-1/4”
Blade "broken-in"
with beveled ends Blade "broken-in"
with beveled ends
Tool Size
with standard wood handle
CF016 16”x3-1/4”
CF020 20”x3-1/4”
with high lift wood handle
CF014M 14”x3-1/4”
Tough durable extru-lite MagnesiumTM blade. Blades "broken-in" and ready to use. Precise handle position gives this float perfect balance and superb floating action.
Tough durable extru-lite MagnesiumTM blade. Blades "broken-in" and ready to use. Precise handle position gives this float perfect balance and superb floating action.
Tool Size
CF076PF 16”x3-1/4”
Tool Size
CF078PF 16”x3-1/4”
ProForm® handle
ProForm® handle
FLOAT HOOK
“BIG JOHN” & “LITTLE JOHN”HEAVY-DUTY PRY BARS
WIDE MAG FLOAT WITH PROFORM® HANDLE
Tough durable 3-1/2” wide extru-lite MagnesiumTM blade. Precise handle position gives the float perfect balance and superb floating action. Beveled edges and smooth rounded corners gives this float that perfect “broken-in” feel.
MINI MAG FLOAT WITH PROFORM® HANDLE
extra lightweight magnesium wall float. Great tool for floating in small areas or top of wall between forms. Fitted with ProForm®
handle. Blade measures, 7-1/2”x3-1/2”.
(CF663PF)
Tool Size
CF015PF 16”x3-1/2”
TM
ProForm® Float Handle (Patent #6,473,939 B1)(Patent #6,821,468 B2)
Float hook clips to belt. Holds hand floats and other tools.
(CF011)
Blade "broken-in"
with beveled ends
TWOSIZES!
ALL STEEL
Ideal all purpose tool for prying forms and other construction jobs. Specially designed 3” wide blade angle and hardened steel claw make for easy prying.
Name Tool length Weight
“Big John” Pry Bar GG630 56” 14 lbs.
“little John” Pry Bar GG631 46” 7 lbs.
Strong Tubular Handles!
ProForm® Float Handle (Patent #6,473,939 B1)(Patent #6,821,468 B2)
REPLACEMENT FLOAT HANDLES
(CF266)
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
30 31
Concr
ete
Rakes
Asp
halt R
akes &
Floor S
crapers
CONCRETE RAKES
ALL ALUMINUM PLACER
Made of strong lightweight aluminum. Blade measures 19-1/2” x 4”. 60” aluminum handle with textured foam grip welded to blade. Heavy-duty aluminum braces for added strength.
Tool Size
CC944 19-1/2”x4”
w/o hook*...assembled*Spreaders assembled ship via oversized rate or truck
Packed (5) per bundle
This well-constructed rake is favored by many concrete tradesmen over straight spreaders for its ease in moving concrete. Comes with 54" wood jam handle.
Packed (5) per carton
CONCRETE RAKEMAGNESIUM OR STEEL
light and super smooth aluminum handle. 60 degree blade keeps tool at just the right angle to spread and level concrete. Heavy-duty aluminum braces for added strength. Blade measures 19-1/2”x4”. 1-3/8” diameter handle.
Tool Size Material
CC010 22-1/2”x5” Steel
CC113 19-1/2”x4” Magnesium
w/ hook
Right Angle Placer ™
60 degree angle
HEAVY-DUTY FLOOR SCRAPERS
MAGNESIUM ASPHALT LUTERIGHT ANGLE PLACER
NOW AVAILABLE WITH 7' HANDLES
Improved asphalt lute has blunt pointed teeth letting asphalt flow through. use smooth side for finishing. Strong two-piece bracket holds blade in place. Magnesium handle.
Tool Head Size Handle Size
GG830 30” Head 7’
FLOOR SCRAPER
Ideal for after work clean up. Scraper blades are firm but flexible. Comes with heavy-duty 5' shovel type wood handle.
T-HANDLE FLOOR SCRAPER
54” long all steel floor scraper. all steel “T” handle for extra leverage. Shaves all kinds of floor coverings on any type of floor. Fitted with 7” replaceable steel blade.
Heavy-duty all steel scraper with weighted head
Fitted with heavy-duty 5' shovel type wood handle
Tool Size Material
CC214 14” blade Floor scraper
CC218 18” blade Floor scraper
CC222 22” blade Floor scraper
CC207 14” Replacement blade
CC208 18” Replacement blade
CC209 22” Replacement blade
Tool Size Material
GG393 7” blade Floor scraper
GG394 7” Replacement blade
GG395 10” Replacement blade
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Tool Size
CC965 19-1/2” w/ hook
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
30 31
Concr
ete
Rakes
Asp
halt R
akes &
Floor S
crapers
CONCRETE RAKES
ALL ALUMINUM PLACER
Made of strong lightweight aluminum. Blade measures 19-1/2” x 4”. 60” aluminum handle with textured foam grip welded to blade. Heavy-duty aluminum braces for added strength.
Tool Size
CC944 19-1/2”x4”
w/o hook*...assembled*Spreaders assembled ship via oversized rate or truck
Packed (5) per bundle
This well-constructed rake is favored by many concrete tradesmen over straight spreaders for its ease in moving concrete. Comes with 54" wood jam handle.
Packed (5) per carton
CONCRETE RAKEMAGNESIUM OR STEEL
light and super smooth aluminum handle. 60 degree blade keeps tool at just the right angle to spread and level concrete. Heavy-duty aluminum braces for added strength. Blade measures 19-1/2”x4”. 1-3/8” diameter handle.
Tool Size Material
CC010 22-1/2”x5” Steel
CC113 19-1/2”x4” Magnesium
w/ hook
Right Angle Placer ™
60 degree angle
HEAVY-DUTY FLOOR SCRAPERS
MAGNESIUM ASPHALT LUTERIGHT ANGLE PLACER
NOW AVAILABLE WITH 7' HANDLES
Improved asphalt lute has blunt pointed teeth letting asphalt flow through. use smooth side for finishing. Strong two-piece bracket holds blade in place. Magnesium handle.
Tool Head Size Handle Size
GG830 30” Head 7’
FLOOR SCRAPER
Ideal for after work clean up. Scraper blades are firm but flexible. Comes with heavy-duty 5' shovel type wood handle.
T-HANDLE FLOOR SCRAPER
54” long all steel floor scraper. all steel “T” handle for extra leverage. Shaves all kinds of floor coverings on any type of floor. Fitted with 7” replaceable steel blade.
Heavy-duty all steel scraper with weighted head
Fitted with heavy-duty 5' shovel type wood handle
Tool Size Material
CC214 14” blade Floor scraper
CC218 18” blade Floor scraper
CC222 22” blade Floor scraper
CC207 14” Replacement blade
CC208 18” Replacement blade
CC209 22” Replacement blade
Tool Size Material
GG393 7” blade Floor scraper
GG394 7” Replacement blade
GG395 10” Replacement blade
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Tool Size
CC965 19-1/2” w/ hook
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
32 33
Edgin
g T
ools
, P
last
ic S
tep T
ools
&
Rub B
rick
s
Vib
ratin
g S
creed
EDGING TOOLS
HAND GROOVER ENAR FLOATING SCREED
PLASTIC STEP TOOLS RUB BRICKS
STAINLESS STEEL SAFETy STEP EDGER
Popular on commercial jobs. Cuts four grooves while edging the step. Grooves 3/4” on center. ProForm® Handle.
TAPERED HAND EDGER
Made of heavy gauge stainless steel to work in all angle corners. ProForm® Handle.
SIDEWALK & HIGHWAy EDGERS
ProForm® Handle.
Fluted silicon carbide rub bricks with a contoured handle to minimize fatigue. Preferred by finishers for fast and easy concrete smoothing and dressing down.
STAINLESS
STEEL
Tool Biit Radius
CF112PF 1/4” deep 1/2”
Tool Size Radius
CF151PF Tapered 8” to 3”x4” 3/8”
CF156PF Tapered 8” to 3”x4” 1/2”
Tool Size Radius Width
CF599PF 6”x 6” 1/2” 1/2”
Tool Width Radius lip
CF137PF 6” 1/4” 3/8”
CF138PF 6” 3/8” 1/2”
CF175PF 6” 1/2” 5/8”
STAINLESS
STEELSTAINLESS
STEEL
Tool Size lip Radius
NoSe Tool
Pl652 6”x5” 2-1/2” 3/4”
Pl653 6”x5” 2-1/2” 1/2”
Pl654 6”x5” 2-1/2” 1-1/2”
CoVe INSIde Tool
Pl655 6”x5” 5” 3/4”
Pl656 6”x5” 5” 1/2”
Pl657 6”x5” 5” 1-1/2”
Special design for pools will not darken white coat. Heavy nose tool plexiglass.
Nose Tool
Round rub brick with handle. lightweight. Makes grinding easy. use one in each hand. Stone is 1” thick and 6” diameter.
Round
FlutedTool Size Grit
CF283 6”x3”x1” 20
CF282 6”x3”x1” 60
Tool Size Grit
CF270 6”x1” 20
Cove Inside Tool
STAINLESS STEEL HAND GROOVER
VIBRATING UNIT WET SCREED
MADE IN SPAIN
Turned up ends to prevent gouging!
Special polished stainless steel for extra smooth working surface.Turned up ends to prevent gouging. ProForm®
Vibrating concrete screed powdered by Honda Mini 4 Stroke engine (GX35)Magnesium screed bar profile from 1.5 to 3 metres.Screed bar and frame manually separated for transport.Folding handle that reduces the transport volume by 50%.Power of the eccentric weights adjustable in 4 positions in order to adapt to the length of the screed bar and the thickness of the concrete to vibrate.Motor separated from the ground, which prevents splashing and reduces the risk of dirt.Multi-point, adjustable acceleration.Semi-rigid transmission that absorbs horizontal and vertical oscillations.Transmission system with a centrifugal clutch.High performance per surface area and volume of concrete vibrated.
HURACAN-LCode Beam options
HuRa3 1.5m, 2.0m, 2.5m & 3m
STRONG,
LIGHTW
EIGHT
MAGNES
IUM
BLADE
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
32 33
Edgin
g T
ools
, P
last
ic S
tep T
ools
&
Rub B
rick
s
Vib
ratin
g S
creed
EDGING TOOLS
HAND GROOVER ENAR FLOATING SCREED
PLASTIC STEP TOOLS RUB BRICKS
STAINLESS STEEL SAFETy STEP EDGER
Popular on commercial jobs. Cuts four grooves while edging the step. Grooves 3/4” on center. ProForm® Handle.
TAPERED HAND EDGER
Made of heavy gauge stainless steel to work in all angle corners. ProForm® Handle.
SIDEWALK & HIGHWAy EDGERS
ProForm® Handle.
Fluted silicon carbide rub bricks with a contoured handle to minimize fatigue. Preferred by finishers for fast and easy concrete smoothing and dressing down.
STAINLESS
STEEL
Tool Biit Radius
CF112PF 1/4” deep 1/2”
Tool Size Radius
CF151PF Tapered 8” to 3”x4” 3/8”
CF156PF Tapered 8” to 3”x4” 1/2”
Tool Size Radius Width
CF599PF 6”x 6” 1/2” 1/2”
Tool Width Radius lip
CF137PF 6” 1/4” 3/8”
CF138PF 6” 3/8” 1/2”
CF175PF 6” 1/2” 5/8”
STAINLESS
STEELSTAINLESS
STEEL
Tool Size lip Radius
NoSe Tool
Pl652 6”x5” 2-1/2” 3/4”
Pl653 6”x5” 2-1/2” 1/2”
Pl654 6”x5” 2-1/2” 1-1/2”
CoVe INSIde Tool
Pl655 6”x5” 5” 3/4”
Pl656 6”x5” 5” 1/2”
Pl657 6”x5” 5” 1-1/2”
Special design for pools will not darken white coat. Heavy nose tool plexiglass.
Nose Tool
Round rub brick with handle. lightweight. Makes grinding easy. use one in each hand. Stone is 1” thick and 6” diameter.
Round
FlutedTool Size Grit
CF283 6”x3”x1” 20
CF282 6”x3”x1” 60
Tool Size Grit
CF270 6”x1” 20
Cove Inside Tool
STAINLESS STEEL HAND GROOVER
VIBRATING UNIT WET SCREED
MADE IN SPAIN
Turned up ends to prevent gouging!
Special polished stainless steel for extra smooth working surface.Turned up ends to prevent gouging. ProForm®
Vibrating concrete screed powdered by Honda Mini 4 Stroke engine (GX35)Magnesium screed bar profile from 1.5 to 3 metres.Screed bar and frame manually separated for transport.Folding handle that reduces the transport volume by 50%.Power of the eccentric weights adjustable in 4 positions in order to adapt to the length of the screed bar and the thickness of the concrete to vibrate.Motor separated from the ground, which prevents splashing and reduces the risk of dirt.Multi-point, adjustable acceleration.Semi-rigid transmission that absorbs horizontal and vertical oscillations.Transmission system with a centrifugal clutch.High performance per surface area and volume of concrete vibrated.
HURACAN-LCode Beam options
HuRa3 1.5m, 2.0m, 2.5m & 3m
STRONG,
LIGHTW
EIGHT
MAGNES
IUM
BLADE
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
34 35
Trow
els
& F
loats
Trow
els &
Floats
ANCORA FLOATS AND TROWELS - MADE IN ITALY ANCORA FLOATS AND TROWELS - MADE IN ITALY
Tool Size
1817603 240 x 120mm
1817606 280 x 140mm
Tool Size
1817903 350 x 70 x 40
Tool Size
1807503 280 x 130
Tool Size
1814360 280 x 120
1814372 280 x 120
1814378 360 x 120
Tool Size
1814794 280 x 120
1814795 280 x 120
1814798 360 x 120
ORANGE SPONGE TROWEL - FINE SOFT TExTURE
orange rubber trowel. Fine texture. Rubber thickness 20mm. Polyurethane support
ORANGE CORNER SPONGE
Polyurethane Support trowel and orange rubber. Triangle secon.
PLASTIC TExTURE FINISH TROWEL
Non marking blade. Black plasc support and handle. Black thickness 2.5mm
FINISHING TROWEL CARBON STEEL
Riveted Sintesi Steel trowel. Rubber handle (1814372 extra long support)
FINISHING TROWEL CARBON STEEL
Riveted Stainless Steel trowel. Rubber Handle (1814795 extra long support)
876
817/P
Tool Size
1814403 6 x 170
8 x 170
10 x 170
12 x 170
Tool Size
2803903 152
2803906 178
2803909 203
2803915 228
2803921 254
Tool Size
2802703 160
2802706 180
2802712 200
Tool Size
1814501 40 x 60 x 60
1814503 70 x 60 x 60
Tool Size
1814801 40 x 60 x 60
1814803 70 x 60 x 60
Tool Size
2803715 159
Tool Size
2901503 120
Tool Size
2901803 120
Tool Size
2906006 150 x 51
2906015 200 x 51
Tool Size
3600000 220 x 140
3600011 140 x 280
3600005 400 x 250
MOTOR SMOOTHING TOOL
Rectangular secon joint filler.
963 GAUGING TROWEL
Sentesi round tip trowel. Soft rubber grip handle. Flexible hardened steel blade.
946 SqUARE FRONT TROWEL
Sentesi square front trowel. Soft rubber grip handle. Flexible hardened steel blade.
ExTERNAL CORNER TROWEL
Trowel for external sharp angles.
INTERNAL CORNER TROWEL
Trowel for internal sharp angles.
960 POINNG TROWEL
Sentesi square tip trowel. Soft rubber grip handle. Flexible hardened steel blade.
985 CATS TONGUE TROWEL
Sentesi pointing trowel. Soft rubber grip handle. Flexible hardened steel blade.
986 OLIVE LEAF TROWEL
Sentesi pointing trowel. Soft rubber grip handle. Flexible hardened steel blade.
990 MARGIN TROWEL
Sentesi margin trowel. Soft rubber grip handle. Flexible hardened steel blade.
POLyURETHANE TROWEL
light weight polyurethane float. one piece mould
851
963
946
854/a
960
985
1901
845
879
845/1
853/a
986
990
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
34 35
Trow
els
& F
loats
Trow
els &
Floats
ANCORA FLOATS AND TROWELS - MADE IN ITALY ANCORA FLOATS AND TROWELS - MADE IN ITALY
Tool Size
1817603 240 x 120mm
1817606 280 x 140mm
Tool Size
1817903 350 x 70 x 40
Tool Size
1807503 280 x 130
Tool Size
1814360 280 x 120
1814372 280 x 120
1814378 360 x 120
Tool Size
1814794 280 x 120
1814795 280 x 120
1814798 360 x 120
ORANGE SPONGE TROWEL - FINE SOFT TExTURE
orange rubber trowel. Fine texture. Rubber thickness 20mm. Polyurethane support
ORANGE CORNER SPONGE
Polyurethane Support trowel and orange rubber. Triangle secon.
PLASTIC TExTURE FINISH TROWEL
Non marking blade. Black plasc support and handle. Black thickness 2.5mm
FINISHING TROWEL CARBON STEEL
Riveted Sintesi Steel trowel. Rubber handle (1814372 extra long support)
FINISHING TROWEL CARBON STEEL
Riveted Stainless Steel trowel. Rubber Handle (1814795 extra long support)
876
817/P
Tool Size
1814403 6 x 170
8 x 170
10 x 170
12 x 170
Tool Size
2803903 152
2803906 178
2803909 203
2803915 228
2803921 254
Tool Size
2802703 160
2802706 180
2802712 200
Tool Size
1814501 40 x 60 x 60
1814503 70 x 60 x 60
Tool Size
1814801 40 x 60 x 60
1814803 70 x 60 x 60
Tool Size
2803715 159
Tool Size
2901503 120
Tool Size
2901803 120
Tool Size
2906006 150 x 51
2906015 200 x 51
Tool Size
3600000 220 x 140
3600011 140 x 280
3600005 400 x 250
MOTOR SMOOTHING TOOL
Rectangular secon joint filler.
963 GAUGING TROWEL
Sentesi round tip trowel. Soft rubber grip handle. Flexible hardened steel blade.
946 SqUARE FRONT TROWEL
Sentesi square front trowel. Soft rubber grip handle. Flexible hardened steel blade.
ExTERNAL CORNER TROWEL
Trowel for external sharp angles.
INTERNAL CORNER TROWEL
Trowel for internal sharp angles.
960 POINNG TROWEL
Sentesi square tip trowel. Soft rubber grip handle. Flexible hardened steel blade.
985 CATS TONGUE TROWEL
Sentesi pointing trowel. Soft rubber grip handle. Flexible hardened steel blade.
986 OLIVE LEAF TROWEL
Sentesi pointing trowel. Soft rubber grip handle. Flexible hardened steel blade.
990 MARGIN TROWEL
Sentesi margin trowel. Soft rubber grip handle. Flexible hardened steel blade.
POLyURETHANE TROWEL
light weight polyurethane float. one piece mould
851
963
946
854/a
960
985
1901
845
879
845/1
853/a
986
990
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
36 37
Bri
ck T
ools
& A
ccess
ori
es B
rick To
ols &
Acce
ssorie
s
BT BRICK CARRIER
TOP STEADY
BT ROLLER RAKER
BT DORI BLOCK CAVITY CLEANER
DOOR GAUGES
BRICK IRONERS
BRICK JOINTERS
description Code
Veneer - nail on ToP
Full brick - clamp to outside wall ToPI
Replacement Parts
G Bracket only ToPG
Nail Bracket only ToPN
Internal G Bracket only ToPGI
description Code
BT Brick Carrier BC
description Code
door Guage dG
door Guage (Wa) dGWa
description Code
Z Ironer 5/8 (16mm) IZ
Z Ironer 1/2 (12mm IS12
Spoon Jointer 1/2 x 5/8 SJ
description Code
Ironer 19mm (3/4”) I34
Ironer 16mm (5/8”) I58
Ironer 12mm (1/2”) I12
Ironer 10mm (3/8”) I38
Ironer 8mm Square (5/16”) I516
description Code
long Poly Wheel Raker RPl
Short Poly Wheel Raker RP
Steel Wheel Raker RS
Replacement Parts
Poly Wheels & Bushes (set) RWP
Steel Wheels & Rivets (set) RWS
Nail for Raker RN
description Code
Cavity Cleaner CC
description Code
doRI BloCK dB
doRI BloCK loNG SIded 50MM dBl50
doRI BloCK loNG SIded 40MM dBl40
a great time saving tool.lifts six bricks at a time.
Heavy guage steel construction.
Zinc coat finish.
BT dooR GauGeS
SolId aNd CoMFoRTaBle To uSe.
Top clamps (steady for profiles).
Complete assembly.
ToPN
ToPG
ToPG
ToPGI
ToPGI
ToPN
ToP
ToPI
(Veneer - nail on)
(Full brick - clamp to outside wall)
Poly Wheel and Steel Wheel Rakers.
DOOR GAUGE
For string line use with steel door frame.
DOOR GAUGE (WA)
Suitable for Western australian door Frame Profiles. For string line use with steel door frame.
dooR GauGe dooR GauGe (Wa)
Ironer 19mm
Ironer 16mm
Ironer 12mm
Ironer 10mm
Ironer 8mm Square
Z Ironer 5/8 Z Ironer 1/2 Spoon Jointer 1/2 x 5/8
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
36 37
Bri
ck T
ools
& A
ccess
ori
es B
rick To
ols &
Acce
ssorie
s
BT BRICK CARRIER
TOP STEADY
BT ROLLER RAKER
BT DORI BLOCK CAVITY CLEANER
DOOR GAUGES
BRICK IRONERS
BRICK JOINTERS
description Code
Veneer - nail on ToP
Full brick - clamp to outside wall ToPI
Replacement Parts
G Bracket only ToPG
Nail Bracket only ToPN
Internal G Bracket only ToPGI
description Code
BT Brick Carrier BC
description Code
door Guage dG
door Guage (Wa) dGWa
description Code
Z Ironer 5/8 (16mm) IZ
Z Ironer 1/2 (12mm IS12
Spoon Jointer 1/2 x 5/8 SJ
description Code
Ironer 19mm (3/4”) I34
Ironer 16mm (5/8”) I58
Ironer 12mm (1/2”) I12
Ironer 10mm (3/8”) I38
Ironer 8mm Square (5/16”) I516
description Code
long Poly Wheel Raker RPl
Short Poly Wheel Raker RP
Steel Wheel Raker RS
Replacement Parts
Poly Wheels & Bushes (set) RWP
Steel Wheels & Rivets (set) RWS
Nail for Raker RN
description Code
Cavity Cleaner CC
description Code
doRI BloCK dB
doRI BloCK loNG SIded 50MM dBl50
doRI BloCK loNG SIded 40MM dBl40
a great time saving tool.lifts six bricks at a time.
Heavy guage steel construction.
Zinc coat finish.
BT dooR GauGeS
SolId aNd CoMFoRTaBle To uSe.
Top clamps (steady for profiles).
Complete assembly.
ToPN
ToPG
ToPG
ToPGI
ToPGI
ToPN
ToP
ToPI
(Veneer - nail on)
(Full brick - clamp to outside wall)
Poly Wheel and Steel Wheel Rakers.
DOOR GAUGE
For string line use with steel door frame.
DOOR GAUGE (WA)
Suitable for Western australian door Frame Profiles. For string line use with steel door frame.
dooR GauGe dooR GauGe (Wa)
Ironer 19mm
Ironer 16mm
Ironer 12mm
Ironer 10mm
Ironer 8mm Square
Z Ironer 5/8 Z Ironer 1/2 Spoon Jointer 1/2 x 5/8
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
38 39
Bri
ck T
ools
& A
ccess
ori
es
Brick
, Pave
r & B
lock
Saw
s
SLIDING CLAMP
PROFILE CLAMPS
NAIL ON G CLAMP
UNIT PROFILE JACK TIMBER CLAMP
INTERNAL SPIKE
DEAN 05 CLAMP
BT PAVER SAW
description Code
BT electric Brick Saw BSaW
BT Petrol Brick Saw (Honda GX200) BSaWHdescription Code
large 560mm (22”) GCl
Small 330mm (13”) GClSH
Replacement Slider GClS
description Code
Medium external Clamp GCM
Medium Internal Clamp GCMI
Small external Clamp GCS
Small Internal Clamp GCSI
description Code
Nail on G Clamp GCN
description Code
unit Profile Jack uPJ
description Code
Timber Clamp TC
description Code
Internal Spike SPI
description Code
Brick Profile Clamp deaN05
BT BRICK SAW
G Clamps.
Suits half brick, full brick and half block.
Slips into 50mm profiles. Holds two timbers to profile pole
Medium external Clamp
Medium Internal Clamp
Small external Clamp
Small Internal Clamp
For securing profiles to internal corners
Top steady to hold firm profile for full brick.
1700W single phase motor or Honda GX200Mobile stand - one person can load.Thumb water control - less mess & no waste.unrestricted view.Foot control.Mitre guide - heavy duty and fully adjustable.Heavy duty long lasting bearings.
dimensions:Work table H-818mm, W-680mm, l-1050mmWeight 85kgTray Width 425mm, depth 300mmdepth of Cut 14”/355mm Blade = 115mm 16”/400mm Blade = 145mmlength of Cut 14”/355mm Blade = 490mm 16”/400mm Blade = 500mm
9HP HoNda Petrol engine, or 2.2kw Single Phase electric, or 4.0kw 3 Phase electric. 2 piece stand for ease of transportation/elevator access.unrestricted view.Foot control.Galvanised Body and Zinc Coat Saw.Heavy duty long lasting bearings.
dimensions:Work table H-885mm, W-550mm, l-1230mmWeight electric 143kgTray Width-560mm, depth-355mmdepth of Cut 20”/510mm Blade = 200mm
description Code
Paver Saw 500 - electric engine 1700w BSaW500
Paver Saw 500 - Honda Petrol engine GX200 BSaWH500
description Code
9HP Petrol engine BlSaWP
2.2Kw Single Phase electric BlSaWSP
4.0Kw 3 Phase electric BlSaW3P
(Single & 3 Phase available)
BLOCK SAW - PETROL OR ELECTRIC
Cuts paver 600 x 600 x 50mm14 “ Blade capacity standardMobile Stand - one person can loadThumb water control - less mess & no wasteunrestricted viewFoot ControlMitre Guide - heavy duty & fully adjustableHeavy duty long lasting bearingsMade in australia for australian conditionsFull 12 month warranty
dimensionsl - 1260mm, W - 660mm, H - 1400mm, W - 95kg
Carriage Sizelength - 465mm Width - 620mmdepth of Cut - 125mmlength of Cut - 600mm
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
38 39
Bri
ck T
ools
& A
ccess
ori
es
Brick
, Pave
r & B
lock
Saw
s
SLIDING CLAMP
PROFILE CLAMPS
NAIL ON G CLAMP
UNIT PROFILE JACK TIMBER CLAMP
INTERNAL SPIKE
DEAN 05 CLAMP
BT PAVER SAW
description Code
BT electric Brick Saw BSaW
BT Petrol Brick Saw (Honda GX200) BSaWHdescription Code
large 560mm (22”) GCl
Small 330mm (13”) GClSH
Replacement Slider GClS
description Code
Medium external Clamp GCM
Medium Internal Clamp GCMI
Small external Clamp GCS
Small Internal Clamp GCSI
description Code
Nail on G Clamp GCN
description Code
unit Profile Jack uPJ
description Code
Timber Clamp TC
description Code
Internal Spike SPI
description Code
Brick Profile Clamp deaN05
BT BRICK SAW
G Clamps.
Suits half brick, full brick and half block.
Slips into 50mm profiles. Holds two timbers to profile pole
Medium external Clamp
Medium Internal Clamp
Small external Clamp
Small Internal Clamp
For securing profiles to internal corners
Top steady to hold firm profile for full brick.
1700W single phase motor or Honda GX200Mobile stand - one person can load.Thumb water control - less mess & no waste.unrestricted view.Foot control.Mitre guide - heavy duty and fully adjustable.Heavy duty long lasting bearings.
dimensions:Work table H-818mm, W-680mm, l-1050mmWeight 85kgTray Width 425mm, depth 300mmdepth of Cut 14”/355mm Blade = 115mm 16”/400mm Blade = 145mmlength of Cut 14”/355mm Blade = 490mm 16”/400mm Blade = 500mm
9HP HoNda Petrol engine, or 2.2kw Single Phase electric, or 4.0kw 3 Phase electric. 2 piece stand for ease of transportation/elevator access.unrestricted view.Foot control.Galvanised Body and Zinc Coat Saw.Heavy duty long lasting bearings.
dimensions:Work table H-885mm, W-550mm, l-1230mmWeight electric 143kgTray Width-560mm, depth-355mmdepth of Cut 20”/510mm Blade = 200mm
description Code
Paver Saw 500 - electric engine 1700w BSaW500
Paver Saw 500 - Honda Petrol engine GX200 BSaWH500
description Code
9HP Petrol engine BlSaWP
2.2Kw Single Phase electric BlSaWSP
4.0Kw 3 Phase electric BlSaW3P
(Single & 3 Phase available)
BLOCK SAW - PETROL OR ELECTRIC
Cuts paver 600 x 600 x 50mm14 “ Blade capacity standardMobile Stand - one person can loadThumb water control - less mess & no wasteunrestricted viewFoot ControlMitre Guide - heavy duty & fully adjustableHeavy duty long lasting bearingsMade in australia for australian conditionsFull 12 month warranty
dimensionsl - 1260mm, W - 660mm, H - 1400mm, W - 95kg
Carriage Sizelength - 465mm Width - 620mmdepth of Cut - 125mmlength of Cut - 600mm
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
40 41
Rein
forc
ing T
ools
CH
AP
IN IN
DU
STR
IAL R
AN
GE
NIPPERS & PINCERS
THE WIRE TWISTER IDEAL REEL
SP-1979 SPRAY SP-61800 SPRAY
description Code
Spray (3.5G/13.2ltrs) SP-1949
description Code
Spray (3.5G/13.2ltrs) SP-1979
description Code
Spray (3.0G/11.4ltrs) SP-22790
description Code
Spray (4.0G/15.1ltrs) SP-61800
Name description Code
Nozzle Industrial Brass Fan Tip Nozzle 6-5797
extension Wand 24” Industrial Brass Male exte 6-7703
Sprayer Handle Industrial Brass Shut-off W/F 6-6062
Hose 48” Industrial Hose w/Fitting 6-6091
Repair Kit Seal and Gasket Kit 6-4627
ergo Pump assy 14 in/35.6cm Brass Pump Barrel asse 3-0106-5
other Parts extension Clip 1-2619-1
Carry Strap with Pad 6-3337
Name description Code
Nozzle Industrial Brass Fan Tip Nozzle 6-5797
extension Wand 24” Industrial Brass Female ex 6-7703
Sprayer Handle Industrial Brass Shut-off W/F 6-6062
Hose 48” Industrial Hose w/Fitting 6-6092
Repair Kit Seal and Gasket Kit with Viton 6-4629
ergo Pump assy 14 in/35.6cm Brass Pump Barrel asse 3-0106-5
other Parts extension Clip 1-2619-1
Carry Strap with Pad 6-3337
Name description Code
Nozzle Industrial Brass Fan Tip Nozzle 6-5797
extension Wand 18” Industrial Brass extension 6-7742
Sprayer Handle Industrial Brass Shut-off 6-1898
Hose 48” Nylon Reinforced Hose 6-6141
Repair Kit Seal and Gasket Kit with Viton 6-1945
Pump Rod assy 11 in/28cm Pump Rod assembly 3-1826
Pump Barrel assy 11 in/28cm Poly Pump Barrel asse 3-1825
Relief Valve assy Relief Valve 6-4645
other Parts extension Clip 1-2619-1
Carry Strap with Pad 6-3337
Name description Code
Nozzle RePl Pl adjustable Nozzel w/ HGR Bag 6-8093
extension Wand RePl Spray Tube 20” w/ HGR Bag 6-8101
Sprayer Handle RePl Shut off Valve w/ HGR Bag 6-8103
Hose RePl Hose 48in w/ HGR Bag 6-8105
Repair Kit Na
description Code
end Cutting Nipper 180mm 131-12-180
end Cutting Nipper 200mm 131-12-200
description Code
KX Tower Pincers 230mm 115-12-230-KX2
KX Tower Pincers 300mm 115-12-300-KX4
description Code
Tower Pincers 220mm 115-12-220
Tower Pincers 250mm 115-12-250
Tower Pincers 280mm 115-12-280
description Code
The Wire Twister 90016
description Code
Tie Wire Id309
SP-1949 SPRAY SP-22790 SPRAY
accurately machined spring return spiral spindle with wear resistant bronze sleeve.
High Tensile Ratchet
Heavy duty, Comfort Grip Handle
leather Bumper
end Cutting Nipper KX Tower Pincer
Tower Pincers
Highest quality die-cast aluminum - all steel components offer longer life.
Holds 14 to 18 gauge black annealed tie wire, copper-covered wire, monel wire, soft galvanized wire or stainless steel wire.
Weighs only 0.9kgs.
Industrial standard sprayer. Heavy duty steel, tripoxy coated for triple protection against corrosion, rust & damage. VIToN seal equipped with large open head. Brass wand & carry strap included.
Premium heavy duty industrial sprayer. Heavy duty steel, tripoxy coated for triple against corrosion, rust & damaged. Hammer tone exterior finish. VIToN seal equipped with large open head. Crush resistant brass wand, internal filter and carry strap included. (Model SP-1999 available with air compressor connection)
Industrial poly sprayer. Wide mouth for no mess filling & cleaning. VIToN seal equipped. Brass wand & carry strap included.
ProSeries back pack sprayer. large pump for pressurising quickly with less pumping. Internal 4 position pressure spray valve. Padded carry straps. Pump handle for adjustable for right or left handed use.
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
MaDE in Usa
MaDE in GERManY
MaDE in GERManY
MaDE in Usa
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
40 41
Rein
forc
ing T
ools
CH
AP
IN IN
DU
STR
IAL R
AN
GE
NIPPERS & PINCERS
THE WIRE TWISTER IDEAL REEL
SP-1979 SPRAY SP-61800 SPRAY
description Code
Spray (3.5G/13.2ltrs) SP-1949
description Code
Spray (3.5G/13.2ltrs) SP-1979
description Code
Spray (3.0G/11.4ltrs) SP-22790
description Code
Spray (4.0G/15.1ltrs) SP-61800
Name description Code
Nozzle Industrial Brass Fan Tip Nozzle 6-5797
extension Wand 24” Industrial Brass Male exte 6-7703
Sprayer Handle Industrial Brass Shut-off W/F 6-6062
Hose 48” Industrial Hose w/Fitting 6-6091
Repair Kit Seal and Gasket Kit 6-4627
ergo Pump assy 14 in/35.6cm Brass Pump Barrel asse 3-0106-5
other Parts extension Clip 1-2619-1
Carry Strap with Pad 6-3337
Name description Code
Nozzle Industrial Brass Fan Tip Nozzle 6-5797
extension Wand 24” Industrial Brass Female ex 6-7703
Sprayer Handle Industrial Brass Shut-off W/F 6-6062
Hose 48” Industrial Hose w/Fitting 6-6092
Repair Kit Seal and Gasket Kit with Viton 6-4629
ergo Pump assy 14 in/35.6cm Brass Pump Barrel asse 3-0106-5
other Parts extension Clip 1-2619-1
Carry Strap with Pad 6-3337
Name description Code
Nozzle Industrial Brass Fan Tip Nozzle 6-5797
extension Wand 18” Industrial Brass extension 6-7742
Sprayer Handle Industrial Brass Shut-off 6-1898
Hose 48” Nylon Reinforced Hose 6-6141
Repair Kit Seal and Gasket Kit with Viton 6-1945
Pump Rod assy 11 in/28cm Pump Rod assembly 3-1826
Pump Barrel assy 11 in/28cm Poly Pump Barrel asse 3-1825
Relief Valve assy Relief Valve 6-4645
other Parts extension Clip 1-2619-1
Carry Strap with Pad 6-3337
Name description Code
Nozzle RePl Pl adjustable Nozzel w/ HGR Bag 6-8093
extension Wand RePl Spray Tube 20” w/ HGR Bag 6-8101
Sprayer Handle RePl Shut off Valve w/ HGR Bag 6-8103
Hose RePl Hose 48in w/ HGR Bag 6-8105
Repair Kit Na
description Code
end Cutting Nipper 180mm 131-12-180
end Cutting Nipper 200mm 131-12-200
description Code
KX Tower Pincers 230mm 115-12-230-KX2
KX Tower Pincers 300mm 115-12-300-KX4
description Code
Tower Pincers 220mm 115-12-220
Tower Pincers 250mm 115-12-250
Tower Pincers 280mm 115-12-280
description Code
The Wire Twister 90016
description Code
Tie Wire Id309
SP-1949 SPRAY SP-22790 SPRAY
accurately machined spring return spiral spindle with wear resistant bronze sleeve.
High Tensile Ratchet
Heavy duty, Comfort Grip Handle
leather Bumper
end Cutting Nipper KX Tower Pincer
Tower Pincers
Highest quality die-cast aluminum - all steel components offer longer life.
Holds 14 to 18 gauge black annealed tie wire, copper-covered wire, monel wire, soft galvanized wire or stainless steel wire.
Weighs only 0.9kgs.
Industrial standard sprayer. Heavy duty steel, tripoxy coated for triple protection against corrosion, rust & damage. VIToN seal equipped with large open head. Brass wand & carry strap included.
Premium heavy duty industrial sprayer. Heavy duty steel, tripoxy coated for triple against corrosion, rust & damaged. Hammer tone exterior finish. VIToN seal equipped with large open head. Crush resistant brass wand, internal filter and carry strap included. (Model SP-1999 available with air compressor connection)
Industrial poly sprayer. Wide mouth for no mess filling & cleaning. VIToN seal equipped. Brass wand & carry strap included.
ProSeries back pack sprayer. large pump for pressurising quickly with less pumping. Internal 4 position pressure spray valve. Padded carry straps. Pump handle for adjustable for right or left handed use.
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
MaDE in Usa
MaDE in GERManY
MaDE in GERManY
MaDE in Usa
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
42 43
CH
AP
IN I
ND
US
TRIA
L &
FA
RM
& F
IELD
CH
AP
IN FA
RM
& FIE
LD R
AN
GE
description Code
Spray - 1420ml SP-1003
description Code
Spray (4.0G/15.1ltr) SP-62000
description Code
B/Pack (4.0G/15.1ltrs) SP-61400
Name description Code
Nozzle Poly adjustable Cone Pattern N 3-1802
Repair Kit Valve Kit 3-1853
other Parts Replacement Pin 1-3576
Name description Code
Nozzle Repl Pl adj Nozzle W Hgr Bag 6-8093
extension Wand Repl Spray Tube 20 W Hgr Bag 6-8101
Sprayer Handle Repl Shut-off assembly 6-8138
Hose 48” Repl Hose W Hgr Bag 6-8105
SP-1003 HAND SPRAYSP-62000 CHAPIN PROF POLY KNAPSACK CHAPIN POLY BACKPACK
Farm & Field hand held pump spray.Fitted with adjustable cone nozzle.
Tree/Turf professional backpack sprayer for weed control, pest control, and fertilizers.
Proseries backpack sprayer. large pump makes pressurising easy. Padded carrying straps – adjustable. easy operation. Multi-use nozzles included
4” FIlTeRed oPeNING
PReSSuRe GuaGe FoR MaXIMuM eFFICIeNCY
60psi 15psi
45psi 30psi
PReSSuRe CoNTRol 15-60 PSI
IN-TaNK ReMoVaBle FIlTeR
adJuSTaBle CoNe aNd FaN NoZZle
SP-2803E SPRAYSP-19069SP-19049 SP-21250 SPRAY
description Code
Poly Spray (3.0G/11.4ltrs) SP-2803e
description Code
Spray (3.0G/11.2ltrs) SP-21250
Name description Code
Nozzle Poly adjustable Cone Nozzle 6-6003
extension Wand 18 Poly extension with Viton 6-7749
Sprayer Handle Poly Shut-off 6-4626
Hose Poly Shut-off 6-4626
Repair Kit Seal and Gasket Kit 6-1925
other Parts Carry Strap with Pad 6-3337
Name description Code
Nozzle Industrial Brass Fan Tip Nozzle 6-5797
extension Wand 24” Industrial Brass Male ex 6-7703
Sprayer Handle Kit Repl Shut off 301219 extr 6-5380
Hose Heavy duty 48” Industrial Hose 6-6092
Repair Kit Kit oh extreme W Blister 6-4646
Name description Code
Nozzle Industrial Brass Fan Tip Nozzle 6-5797
extension Wand 24” Industrial Brass Male ex 6-7703
Sprayer Handle Kit Repl Shut off 301219 extr 6-5380
Hose Heavy duty 48” Industrial Hose 6-6092
Repair Kit Kit oh extreme W Blister 6-4646
Name description Code
Nozzle Brass adjustable Cone Nozzle 6-6000
extension Wand 18” Premier Brass extension 6-7711
Sprayer Handle Premier epoxy Coated Zinc Shut 6-1866
Hose 42” 106 7 cm Hose with Con 6-6136
Repair Kit Seal and Gasket Kit with Viton 6-1945
Farm & Field Poly Sprayer Plus. Wide Mouth Filler. adjustable nozzle spray cone to stream. ergo Handle. easy to clean poly shut-off requires no tools
Stainless Steel Xtreme Industrial Concrete Sprayer.For up to 100% acetone, Naptha, Xylene & Toluene concentrations. extreme Viton Seals fitted.
Xtreme Industrial Concrete Sprayer For up to 30% acetone, Naptha, Xylene & Toluene concentrations. extreme Viton Seals fitted. Steel tank tripoxy coated.
Professional Farm & Field Viton Sprayer. Fitted with Viton Seals.Quality Poly Construction. 18” Premier Brass Sprayer handle and wand. adjustable Brass Cone Nozzle.
description Code
Steel Coated (3.5G/13.2ltrs) SP-19049
description Code
S/Steel (3.5G/13.2ltrs) SP-19069
Name description Code
Nozzle Repl Pl adj Nozzle W Hgr Bag 6-8093
Repl Flat Spray Jet W Hgr Bag 6-8096
Repl Brass adj Nozzle 6-8122
Backpack Complete Nozzle Kit F 301478
extension Wand Repl Spray Tube 20 W Hgr Bag 6-8174
Repl Wand Clips 6-8152
Sprayer Handle Repl Shut-off assembly 6-8177
Hose Repl Hose 48in W Hgr Bag 6-8105
Repair Kit Repl Piston Pump Repair Kit 6-8180
Repl Shut-off Repair Kit 6-8185
Repl o-Ring Kit 6-8153
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
MaDE in UsaMaDE in Usa
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
P
h:
07
- 3
32
6 1
50
0
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
42 43
CH
AP
IN I
ND
US
TRIA
L &
FA
RM
& F
IELD
CH
AP
IN FA
RM
& FIE
LD R
AN
GE
description Code
Spray - 1420ml SP-1003
description Code
Spray (4.0G/15.1ltr) SP-62000
description Code
B/Pack (4.0G/15.1ltrs) SP-61400
Name description Code
Nozzle Poly adjustable Cone Pattern N 3-1802
Repair Kit Valve Kit 3-1853
other Parts Replacement Pin 1-3576
Name description Code
Nozzle Repl Pl adj Nozzle W Hgr Bag 6-8093
extension Wand Repl Spray Tube 20 W Hgr Bag 6-8101
Sprayer Handle Repl Shut-off assembly 6-8138
Hose 48” Repl Hose W Hgr Bag 6-8105
SP-1003 HAND SPRAYSP-62000 CHAPIN PROF POLY KNAPSACK CHAPIN POLY BACKPACK
Farm & Field hand held pump spray.Fitted with adjustable cone nozzle.
Tree/Turf professional backpack sprayer for weed control, pest control, and fertilizers.
Proseries backpack sprayer. large pump makes pressurising easy. Padded carrying straps – adjustable. easy operation. Multi-use nozzles included
4” FIlTeRed oPeNING
PReSSuRe GuaGe FoR MaXIMuM eFFICIeNCY
60psi 15psi
45psi 30psi
PReSSuRe CoNTRol 15-60 PSI
IN-TaNK ReMoVaBle FIlTeR
adJuSTaBle CoNe aNd FaN NoZZle
SP-2803E SPRAYSP-19069SP-19049 SP-21250 SPRAY
description Code
Poly Spray (3.0G/11.4ltrs) SP-2803e
description Code
Spray (3.0G/11.2ltrs) SP-21250
Name description Code
Nozzle Poly adjustable Cone Nozzle 6-6003
extension Wand 18 Poly extension with Viton 6-7749
Sprayer Handle Poly Shut-off 6-4626
Hose Poly Shut-off 6-4626
Repair Kit Seal and Gasket Kit 6-1925
other Parts Carry Strap with Pad 6-3337
Name description Code
Nozzle Industrial Brass Fan Tip Nozzle 6-5797
extension Wand 24” Industrial Brass Male ex 6-7703
Sprayer Handle Kit Repl Shut off 301219 extr 6-5380
Hose Heavy duty 48” Industrial Hose 6-6092
Repair Kit Kit oh extreme W Blister 6-4646
Name description Code
Nozzle Industrial Brass Fan Tip Nozzle 6-5797
extension Wand 24” Industrial Brass Male ex 6-7703
Sprayer Handle Kit Repl Shut off 301219 extr 6-5380
Hose Heavy duty 48” Industrial Hose 6-6092
Repair Kit Kit oh extreme W Blister 6-4646
Name description Code
Nozzle Brass adjustable Cone Nozzle 6-6000
extension Wand 18” Premier Brass extension 6-7711
Sprayer Handle Premier epoxy Coated Zinc Shut 6-1866
Hose 42” 106 7 cm Hose with Con 6-6136
Repair Kit Seal and Gasket Kit with Viton 6-1945
Farm & Field Poly Sprayer Plus. Wide Mouth Filler. adjustable nozzle spray cone to stream. ergo Handle. easy to clean poly shut-off requires no tools
Stainless Steel Xtreme Industrial Concrete Sprayer.For up to 100% acetone, Naptha, Xylene & Toluene concentrations. extreme Viton Seals fitted.
Xtreme Industrial Concrete Sprayer For up to 30% acetone, Naptha, Xylene & Toluene concentrations. extreme Viton Seals fitted. Steel tank tripoxy coated.
Professional Farm & Field Viton Sprayer. Fitted with Viton Seals.Quality Poly Construction. 18” Premier Brass Sprayer handle and wand. adjustable Brass Cone Nozzle.
description Code
Steel Coated (3.5G/13.2ltrs) SP-19049
description Code
S/Steel (3.5G/13.2ltrs) SP-19069
Name description Code
Nozzle Repl Pl adj Nozzle W Hgr Bag 6-8093
Repl Flat Spray Jet W Hgr Bag 6-8096
Repl Brass adj Nozzle 6-8122
Backpack Complete Nozzle Kit F 301478
extension Wand Repl Spray Tube 20 W Hgr Bag 6-8174
Repl Wand Clips 6-8152
Sprayer Handle Repl Shut-off assembly 6-8177
Hose Repl Hose 48in W Hgr Bag 6-8105
Repair Kit Repl Piston Pump Repair Kit 6-8180
Repl Shut-off Repair Kit 6-8185
Repl o-Ring Kit 6-8153
TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au
MaDE in UsaMaDE in Usa
Emai
l: S
ales
@cl
tool
cen
tre.
com
Established 1969
Ph
: 0
7 -
33
26
15
00
6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599
44www.master f inish.com.au
A.G.PULIE PTY LTDA.C.N. 000 864 308
6 Wentworth St, Granville N.S.W 2142. P.O. Box 309, Granville N.S.W 2142Tel: (02) 9637 9011 Fax: (02) 9682 1269 Email: [email protected]
BRISBANEPH: (07) 3893 2877
MELBOURNEPH: (03) 9460 5700
PERTHPH: (08) 9350 6255
ADELAIDEPH: (08) 8326 2336