Martin Carr - hs.carrs-silver.co.uk
Transcript of Martin Carr - hs.carrs-silver.co.uk
1
Martin Carr
From: Martin Carr [[email protected]]Sent: 09 October 2013 09:33To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey'Subject: RE: Toolroom Grinding LEV
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 September 2013 09:43 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 August 2013 10:39 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Marc, Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 July 2013 09:16 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Marc, Still waiting?? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 28 June 2013 09:53 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Marc, I am still awaiting an update on this job? Martin.
2
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:22 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 October 2012 18:53 To: 'Marc Horner'; 'Jim Storey' Cc: 'Martin Carr' Subject: Toolroom Grinding LEV Work is required to this item; http://hs.carrs‐silver.co.uk/toolroomgrindinglev.pdf Martin.
3
Martin Carr
From: Martin Carr [[email protected]]Sent: 02 October 2013 10:51To: 'Martin Carr'; [email protected]; 'Jim Storey'Subject: RE: Press 17200
Marc, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2013 08:57 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: [email protected] Subject: RE: Press 17200 09/09/2013 09:14 Deferred due Marc holiday Marc, Still waiting? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 July 2013 11:19 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: [email protected] Subject: RE: Press 17200 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 June 2013 09:34 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: [email protected] Subject: RE: Press 17200 Marc, I have not had an update on this job, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 December 2012 19:23 To: [email protected]; 'Jim Storey' Cc: [email protected] Subject: Press 17200
4
Please note that work is required on this press. See http://hs.carrs‐silver.co.uk/press17200.pdf for details. Martin.
5
Martin Carr
From: Marc Horner [[email protected]]Sent: 23 September 2013 09:21To: 'Martin Carr'; 'Jim Storey'Cc: [email protected]: RE: HS Job 442 - Lifting Tackle
Job Complete, Duplicate of 1035008
From: Martin Carr [mailto:[email protected]] Sent: 23 September 2013 09:14 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 28 August 2013 09:14 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 05 August 2013 11:25 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 July 2013 11:34 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Marc, Can you advise what is happening with regard to this? Martin.
6
From: Martin Carr [mailto:[email protected]] Sent: 06 June 2013 11:28 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Marc, Can you let me know an estimated date when this job will be complete? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 May 2013 09:22 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Marc, Can you let me know on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 May 2013 11:14 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 May 2013 07:55 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Marc, I have not had an update on this job for a while, can you let me have an approx date when it will be sorted? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:24 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Can you let me have an update on this job?
7
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:02 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 442 - Lifting Tackle Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:45 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 442 - Lifting Tackle Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 442 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 442 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 17 November 2011 15:41 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 442 - Lifting Tackle Quote has been requested on this job.
8
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 442 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 442 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 442 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 442 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 15 April 2011 14:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 442 - Lifting Tackle Jim, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2011 15:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 442 - Lifting Tackle Jim, Can you advise on progress on this job? Martin.
9
From: Martin Carr [mailto:[email protected]] Sent: 27 January 2011 12:34 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Subject: HS Job 442 - Lifting Tackle Can you please advise on the status of this job?
From: Martin Carr [mailto:[email protected]] Sent: 15 November 2010 16:20 To: 'Martin Carr'; 'Jim Storey' Cc: 'Jack Wood' Subject: HS Job 442 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2010 15:38 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 442 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2010 16:16 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: RE: HS Job 442 - Lifting Tackle Please advise
From: Martin Carr [mailto:[email protected]] Sent: 13 August 2010 11:52 To: 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 442 - Lifting Tackle The following HS job is still outstanding. Can you please let me have an update on progress? Martin.
442. http://hs.carrs‐silver.co.uk/liftingu1.pdf 10 May 2010 Work required to 1035008 04 June 2010 Job Outstanding 13 August 2010 Requested update from Jim Storey 27 Sept 2010 Requested update from Jim Storey on this job 18 Oct 2010 Requested update from Jim Storey 15 Nov 2010 Requested update from Jim Storey
10
Martin Carr
From: Marc Horner [[email protected]]Sent: 20 September 2013 15:39To: 'Martin Carr'; [email protected]; 'Jim Storey'Subject: RE: PT26 Manual Pallet Truck 878509 Job COMPLETE
If I can find it
From: Martin Carr [mailto:[email protected]] Sent: 19 September 2013 14:03 To: 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: PT26 Manual Pallet Truck 878509 Has it been scrapped then? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 19 September 2013 10:13 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT26 Manual Pallet Truck 878509 Beyond Economic Repair
From: Martin Carr [mailto:[email protected]] Sent: 18 September 2013 09:42 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT26 Manual Pallet Truck 878509 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 August 2013 10:39 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT26 Manual Pallet Truck 878509 Marc, Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 July 2013 09:16 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT26 Manual Pallet Truck 878509 Marc, Still waiting?? Martin.
11
From: Martin Carr [mailto:[email protected]] Sent: 28 June 2013 09:53 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT26 Manual Pallet Truck 878509 Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:22 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT26 Manual Pallet Truck 878509 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:05 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT26 Manual Pallet Truck 878509 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 May 2012 18:15 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: PT26 Manual Pallet Truck 878509 Work is required to this item. http://hs.carrs‐silver.co.uk/liftingu1.pdf
12
Martin Carr
From: Marc Horner [[email protected]]Sent: 17 September 2013 17:23To: 'Martin Carr'; [email protected]; 'Jim Storey'Subject: RE: Manual Platform MH11098
Martin, Completed Marc
From: Martin Carr [mailto:[email protected]] Sent: 17 September 2013 09:56 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11098 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 August 2013 09:36 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11098 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 July 2013 12:06 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11098 Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 June 2013 09:04 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11098 Marc, Can you advise on this job? Martin.
13
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:23 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11098 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:04 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11098 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 May 2012 18:15 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: Manual Platform MH11098 Work is required on this item. http://hs.carrs‐silver.co.uk/liftingu1.pdf
14
Martin Carr
From: Marc Horner [[email protected]]Sent: 16 September 2013 11:03To: 'Martin Carr'; 'Jim Storey'Cc: [email protected]: RE: HS 477 Power Press
Job Complete
From: Martin Carr [mailto:[email protected]] Sent: 16 September 2013 09:31 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 477 Power Press Marc, Can you advise how this job is progressing? Martin. t: +44 114 263 3203 m: +44 7973 561 502 Skype: martin.carr.woodlands (note always appears off‐line, just call it) Diary Availability: Google Calandar
From: Martin Carr [mailto:[email protected]] Sent: 20 August 2013 11:16 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 477 Power Press Marc, I am still awaiting news on this job, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 July 2013 09:11 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 477 Power Press Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 26 June 2013 09:08 To: 'Jim Storey' Cc: [email protected]; 'Martin Carr' Subject: RE: HS 477 Power Press Marc,
15
Can you advise on this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:23 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 477 Power Press Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:03 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 477 Power Press Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 477 Power Press Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS 477 Power Press Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:46 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS 477 Power Press
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20
16
To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS 477 Power Press
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS 477 Power Press
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS 477 Power Press
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 477 Power Press
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 477 Power Press
From: Martin Carr [mailto:[email protected]] Sent: 15 April 2011 14:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 477 Power Press Jim, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2011 15:29 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 477 Power Press
17
Jim, Can you advise on progress on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 January 2011 12:34 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Subject: HS 477 Power Press Can you please advise on the status of this job?
From: Martin Carr [mailto:[email protected]] Sent: 19 December 2010 11:45 To: 'Jim Storey' Cc: 'Martin Carr' Subject: HS 477 Power Press Jim, Work is required on this job; http://hs.carrs‐silver.co.uk/powerpressno36.pdf Please advise when complete. Martin.
18
Martin Carr
From: Martin Carr [[email protected]]Sent: 10 July 2013 11:12To: 'Marc Horner'Cc: 'Martin Carr'Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13Attachments: image001.jpg
Marc,
Has this wall been fixed now?
Martin.
From: Marc Horner [mailto:[email protected]] Sent: 20 May 2013 08:51 To: Martin Carr Subject: FW: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
FYI – report from Structural Engineer on wall in despatch.
18/06/2013 09:34 Has wall been fixed
From: Andy Jones [mailto:[email protected]] Sent: 16 May 2013 11:38 To: [email protected] Subject: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
Marc,
We confirm for your records our inspection of cracking in an internal wall in the factory on 10 May 2013. The wall is built using concrete blocks tied to the steel portal column at one end and to an secondary steel stability post at the other end. The wall length is in the order of 7m, broken by a double door at approximately one third from the portal column end. A near vertical crack has developed from the lintel bearing to the top of the wall. This is shown on the attached sketch 35913/SK01.
We believe the crack has developed in response to normal building thermal movements, possibly aggravated by the occasional collision from fork lift truck movements in the factory. We advised you that the crack does not affect the stability of the wall, nevertheless it would be prudent to provide nominal steel bar stitching across the crack before pointing and re-decorating. These ties are to help distribute the movement from the crack back into the wall to stop fretting on the crack line in the future.
We have suggested Helifix Crack Stitching as a recognised proven proprietary crack repair system. Details are shown on the attached PDF copy of the manufacturers literature for your reference.
If there should be any further queries please contact us again.
Regards
Andy Jones (Associate)
Eastwood & Partners (Consulting Engineers) Ltd St Andrew's House, 23 Kingfield Road, Sheffield, S11 9AS Web: www.eastwoodandpartners.com Tel. 0114 2554554 Email: [email protected] Fax. 0114 2554330 Please Read: Information in this message is confidential and may be legally privileged. It is intended solely for the person to whom it is addressed. If you are not the intended recipient, please notify the sender and delete the message from your system immediately. It is your responsibility to check this email for viruses and Eastwood & Partners cannot be held responsible for any resulting loss or damage in the event that this message or any attachments contains a virus.
20
Martin Carr
From: Martin Carr [[email protected]]Sent: 16 October 2013 09:36To: 'Martin Carr'; 'Marc Horner'Subject: RE: HS 473 Woodwork LEV UPDATED
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise what is happening in regard to the update to this report? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 03 October 2013 16:41 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED The report has been updated from the insurance company.
From: Marc Horner [mailto:[email protected]] Sent: 24 September 2013 17:18 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Martin, All the extras were fitted, but inspector has been today, there needs to be further improvement for dust capture on 5 items (see report when it arrives) Noted that the last mods are an improvement to what was existing – but more is needed Marc
From: Martin Carr [mailto:[email protected]] Sent: 24 September 2013 08:39 To: 'Marc Horner'; 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, Can you advise on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 07 August 2013 09:44 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED 02/09/2013 09:05 Marc on holiday at present
21
Yes, Its on site, will be fitted when we have a spare hour Marc
From: Martin Carr [mailto:[email protected]] Sent: 07 August 2013 09:13 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Has this been delivered as yet? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 05 July 2013 14:12 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Its on the Order with the other Fabricated Items, Got a better price with it not being a rush job, Will be delivered in the next 3 or 4 weeks Marc
From: Martin Carr [mailto:[email protected]] Sent: 04 July 2013 09:49 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, What happened? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 June 2013 11:21 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED What has become on this order? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 June 2013 10:49 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, Can you advise when this job will be complete? Martin.
22
From: Marc Horner [mailto:[email protected]] Sent: 24 May 2013 18:46 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Need to order a new capture hood for router 4. Will place PO next week
From: Martin Carr [mailto:[email protected]] Sent: 24 May 2013 10:06 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 May 2013 15:35 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, Can you advise what has become of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:09 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED
From: Marc Horner [mailto:[email protected]] Sent: 16 November 2012 14:42 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV The bottom flexible duct to the planer is damaged and currently disconnected from the system. The duct should be repaired and the capture hood refitted. Reconnected Capture hoods are missing at Routers 4 and 5 and should be fitted in order to improve the effective capture. Quoted – On Order The Wadkin Cross Cut Saw, No 10, has no extraction fitted to the saw hood. Reconnected
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:43
23
To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected]; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:45 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected]; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV
From: Martin Carr [mailto:[email protected]] Sent: 21 October 2011 14:48 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV From: Jim Storey [mailto:[email protected]] Sent: 21 October 2011 13:49 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV Done awaiting retest
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV Can you advise on progress?
From: Martin Carr [mailto:[email protected]] Sent: 05 October 2011 13:44 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV Please note that this has been re‐inspected, where additional items have now been taken out of use. Jim, Can you arrange for these to be fixed asap.
24
Steve, Please ensure that this equipment is not used until it has been repaired. Anyone doing so will be subject to company disciplinary procedure. Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 473 Woodwork LEV
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 473 Woodwork LEV
From: Martin Carr [mailto:[email protected]] Sent: 15 April 2011 14:20 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 473 Woodwork LEV Jim, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2011 15:42 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 473 Woodwork LEV Jim, Can you advise on progress on this job? Martin.
25
From: Martin Carr [mailto:[email protected]] Sent: 27 January 2011 12:34 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Subject: HS 473 Woodwork LEV Can you please advise on the status of this job?
From: Martin Carr [mailto:[email protected]] Sent: 15 November 2010 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson' Cc: 'Jack Wood' Subject: HS 473
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2010 15:30 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson' Subject: HS 473 Can you advise what is happening with regard to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 October 2010 15:54 To: 'Jim Storey'; 'Steve Donson' Cc: 'Martin Carr' Subject: HS 473 Please note that the woodworking general extractor is a poor state. Housekeeping is a bad problem (pipes blocked etc). There are also a few dampers that have been removed and not replaced. Finally a few items do require replacement. For full details see this link http://hs.carrs‐silver.co.uk/woodlev.pdf Please advise. Martin 04 Oct 2010 Job issued to Jim Storey & Steve Donson 18 Oct 2010 Requested update from Jim Storey & Steve Donson 15 Nov 2010 Requested update from Jim Storey
26
Martin Carr
From: Martin Carr [[email protected]]Sent: 16 October 2013 09:35To: 'Marc Horner'Cc: 'Martin Carr'Subject: RE: Drain Covers & Potholes
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you update me on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 25 September 2013 11:29 To: 'Martin Carr' Subject: RE: Drain Covers & Potholes Drainage channels complete, need quotes for groundwork’s Marc
From: Martin Carr [mailto:[email protected]] Sent: 25 September 2013 10:30 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Drain Covers & Potholes Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 06 August 2013 09:37 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Drain Covers & Potholes Marc, Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2013 14:08 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Drain Covers & Potholes Yes it is falling in. Martin.
27
From: Marc Horner [mailto:[email protected]] Sent: 05 July 2013 13:14 To: 'Martin Carr' Subject: RE: Drain Covers & Potholes 15 L/M of heavy duty drain cover £447.00 + vat Want em? Marc
From: Marc Horner [mailto:[email protected]] Sent: 05 July 2013 11:29 To: 'Martin Carr' Subject: RE: Drain Covers & Potholes Been in today to quote on the drain channel covers, Will have price and leadtime early next week
From: Martin Carr [mailto:[email protected]] Sent: 04 July 2013 09:48 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers & Potholes Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 June 2013 11:19 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers & Potholes I am still awaiting at ETTC for this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 31 May 2013 09:44 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers & Potholes Marc, Can you advise what has become of this price? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 May 2013 09:51 To: 'Marc Horner'; 'Jason Bee' Cc: 'Martin Carr' Subject: RE: Drain Covers & Potholes
28
Marc, Can you advise how these quotes are progressing? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 10 May 2013 13:57 To: 'Martin Carr'; 'Jason Bee' Subject: RE: Drain Covers & Potholes Martin, the manhole has started to collapse at the top in the yard, Builder has been in and measured up to quote – waiting for price, I will contact a second for another quote All the heavy duty covers we have were custom made @ DSS – I have asked them to re‐quote to replace the remaining pressed steel ones Marc
From: Martin Carr [mailto:[email protected]] Sent: 10 May 2013 10:07 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers Marc, Can you advise how this job is going and when it will be completed? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 May 2013 09:20 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers Marc, How is the drain brick repair work looking? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 25 April 2013 12:00 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers Marc, Can you advise when this job will be done, approx? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 April 2013 09:22 To: 'Marc Horner'; 'Jason Bee'
29
Cc: 'Martin Carr' Subject: RE: Drain Covers Marc, Can you let me have an update on this project? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 09 April 2013 15:11 To: 'Martin Carr'; 'Jason Bee' Subject: RE: Drain Covers Now the snows gone I’ll measure up and see if I can get standards, if not it will be made to measure Marc
From: Martin Carr [mailto:[email protected]] Sent: 09 April 2013 13:19 To: 'Martin Carr'; 'Jason Bee' Cc: 'Marc Horner' Subject: RE: Drain Covers Marc, Can you advise what is happening with regard to this project? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 March 2013 09:30 To: 'Martin Carr'; 'Jason Bee' Cc: 'Marc Horner' Subject: RE: Drain Covers Marc, I am still awaiting an update on this, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 March 2013 10:03 To: 'Martin Carr'; 'Jason Bee' Cc: 'Marc Horner' Subject: RE: Drain Covers Can you advise when some action will be done with regard to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 March 2013 15:31 To: 'Jason Bee' Cc: 'Martin Carr'; 'Marc Horner' Subject: RE: Drain Covers
30
I have now had a look at the drain covers and would also advise that come checker board is cut down to achieve what is needed.. Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 March 2013 11:30 To: 'Martin Carr'; 'Jason Bee' Subject: RE: Drain Covers Can you advise what has become of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 26 February 2013 09:41 To: 'Martin Carr'; 'Jason Bee' Subject: RE: Drain Covers Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 February 2013 09:40 To: 'Jason Bee' Subject: RE: Drain Covers Can you advise what has become of this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 February 2013 16:56 To: 'Jason Bee' Subject: Drain Covers Jason, Can you investigate the cost of the “heavy duty” storm covers for the centre drains as used by the ammonia area.. Outside the gate there are a few, which are good, but then it goes to aluminium ones which are not strong enough.. So looking to replace those? Martin.
31
Martin Carr
From: Martin Carr [[email protected]]Sent: 16 October 2013 09:35To: 'Marc Horner'Cc: 'Martin Carr'Subject: RE: Press Bliss 25t
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you update me on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 25 September 2013 11:30 To: 'Martin Carr' Subject: RE: Press Bliss 25t DSS didn’t quote on this last time, they will be in to quote next weds Marc
From: Martin Carr [mailto:[email protected]] Sent: 25 September 2013 10:31 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press Bliss 25t Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 August 2013 09:57 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press Bliss 25t Marc, Can you let me have an update? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 06 August 2013 09:37 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press Bliss 25t Marc, Please advise?
32
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 August 2013 09:21 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Press Bliss 25t Well? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 July 2013 12:06 To: 'Marc Horner'; 'Martin Carr' Subject: RE: Press Bliss 25t 4‐6 Weeks have now passed, is this now done? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 14 June 2013 08:32 To: 'Martin Carr' Subject: RE: Press Bliss 25t The guards have never existed for this feeder, We will quote on having a set made, Due to holidays 4‐6 weeks
From: Martin Carr [mailto:[email protected]] Sent: 12 June 2013 16:32 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press Bliss 25t Marc, As per the latest report, work is required on this press
http://hs.carrs‐silver.co.uk/pressbliss25t.pdf Martin.
33
Martin Carr
From: Martin Carr [[email protected]]Sent: 15 October 2013 08:33To: 'Martin Carr'; 'Marc Horner'Subject: RE: Manual Platform MH11097
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 24 September 2013 08:39 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Manual Platform MH11097 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 August 2013 09:11 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Manual Platform MH11097 02/09/2013 09:05 Marc on holiday at present I am STILL awaiting a reply, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 July 2013 23:44 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Manual Platform MH11097 Well? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 June 2013 12:52 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Manual Platform MH11097 Marc, Has this been binned as yet? Martin.
34
From: Marc Horner [mailto:[email protected]] Sent: 14 June 2013 08:34 To: 'Martin Carr' Subject: RE: Manual Platform MH11097 I cant find it I will look round this afternoon when the factory is shut and it will be binned Marc
From: Martin Carr [mailto:[email protected]] Sent: 13 June 2013 09:41 To: 'Martin Carr'; 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11097 Can you update me on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 June 2013 10:08 To: 'Marc Horner'; '[email protected]'; 'Jim Storey' Subject: RE: Manual Platform MH11097 Marc, Can you advise if they will/have been scrapped? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 10 May 2013 14:03 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11097 Martin, To replace the Lift cylinder diverter sheave flanges it would be cheaper to replace the pallet truck Marc
From: Martin Carr [mailto:[email protected]] Sent: 09 May 2013 14:00 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11097 Marc, Can you advise how this job is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:22
35
To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11097 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:04 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11097 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 May 2012 18:15 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: Manual Platform MH11097 Work is required to this item. http://hs.carrs‐silver.co.uk/liftingu1.pdf
36
Martin Carr
From: Martin Carr [[email protected]]Sent: 15 October 2013 08:32To: 'Martin Carr'; 'Marc Horner'Subject: RE: Press 8
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 24 September 2013 08:40 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 8 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 August 2013 09:13 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 8 02/09/2013 09:05 Marc on holiday at present Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 July 2013 11:29 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 8 Marc, Can you advise how this job is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 June 2013 16:45 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 8 Marc,
38
Martin Carr
From: Martin Carr [[email protected]]Sent: 14 October 2013 09:32To: 'Martin Carr'; 'Jim Storey'Cc: [email protected]: RE: HS Job 444 - Lifting Tackle PT10
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 24 September 2013 08:38 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 August 2013 09:53 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 06 August 2013 09:37 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 July 2013 09:48 To: 'Martin Carr'; 'Jim Storey'
39
Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 June 2013 11:20 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Can you let me know on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 June 2013 10:48 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise when this job will be complete? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 24 May 2013 10:06 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise what is happening with regard to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 May 2013 15:34 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise what has become of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:22 To: 'Martin Carr'; 'Jim Storey'
40
Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:05 To: 'Martin Carr'; 'Jim Storey' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 May 2012 18:15 To: 'Martin Carr'; 'Jim Storey' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Can you advise on progress of this job?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:45 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 444 - Lifting Tackle Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 17 November 2011 15:38 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'
41
Cc: 'Richard Carr' Subject: RE: HS Job 444 - Lifting Tackle A quote has been requested for this job.
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 15 April 2011 14:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 444 - Lifting Tackle Jim, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2011 15:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 444 - Lifting Tackle Jim,
42
Can you advise on progress on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 January 2011 12:34 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Subject: HS Job 444 - Lifting Tackle Can you please advise on the status of this job?
From: Martin Carr [mailto:[email protected]] Sent: 15 November 2010 16:20 To: 'Martin Carr'; 'Jim Storey' Cc: 'Jack Wood' Subject: RE: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2010 15:38 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2010 16:16 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 444 - Lifting Tackle Please advise.
From: Martin Carr [mailto:[email protected]] Sent: 13 August 2010 11:56 To: 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 444 - Lifting Tackle The following HS job is still outstanding. Can you please let me have an update on progress? Martin.
444. http://hs.carrs‐silver.co.uk/liftingu1.pdf 10 May 2010 Work required to PT10 04 June 2010 Job Outstanding 13 August 2010 Requested update from Jim Storey 27 Sept 2010 Requested update from Jim Storey on this job 18 Oct 2010 Requested update from Jim Storey 15 Nov 2010 Requested update from Jim Storey
44
Martin Carr
From: Martin Carr [[email protected]]Sent: 14 October 2013 09:32To: 'Marc Horner'Cc: 'Charles Warriner'; 'Martin Carr'Subject: RE: Press 15864
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on the progress of this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 20 September 2013 15:46 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Martin, The Guards “thumbscrews” are tightened with a key, and cannot be untightened by hand The interlocks etc are behind the heater requests you keep prioritising for the electricians Marc
From: Martin Carr [mailto:[email protected]] Sent: 20 September 2013 12:37 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 August 2013 10:50 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 August 2013 09:21 To: 'Martin Carr'; [email protected]
45
Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, I need an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 July 2013 10:52 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 11 June 2013 10:58 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 May 2013 09:04 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:25 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:02
46
To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 23 April 2012 16:48 To: [email protected] Cc: 'Charles Warriner'; 'Martin Carr' Subject: Press 15864 Please note that this press cannot be returned to service until the work requested has been carried out. http://hs.carrs‐silver.co.uk/press15865.pdf Martin.
47
Martin Carr
From: Martin Carr [[email protected]]Sent: 11 October 2013 10:20To: 'Marc Horner'; 'Jim Storey'Cc: 'Martin Carr'Subject: RE: Brit 4259
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on progress of this? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 20 September 2013 15:43 To: 'Martin Carr'; 'Jim Storey' Subject: RE: Brit 4259 It is on the list for maintenance The Brakes are not used on this trolley – will be completed as we have time Marc
From: Martin Carr [mailto:[email protected]] Sent: 20 September 2013 12:37 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Brit 4259 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 August 2013 10:50 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Brit 4259 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 August 2013 09:21 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Brit 4259 Marc, I need an update on this job?
48
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 July 2013 10:52 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Brit 4259 Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 11 June 2013 10:58 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Brit 4259 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 May 2013 09:04 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Brit 4259 Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 November 2012 18:33 To: 'Marc Horner'; 'Jim Storey' Cc: 'Martin Carr' Subject: Brit 4259 Marc, Work is required on this lifting platform. Please advise? Martin. http://hs.carrs‐silver.co.uk/liftingu1.pdf
49
Martin Carr
From: Martin Carr [[email protected]]Sent: 11 October 2013 10:20To: 'Marc Horner'; 'Jim Storey'Cc: 'Martin Carr'Subject: RE: Wilmat 20195
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise how this job is progressing? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 20 September 2013 15:39 To: 'Martin Carr'; 'Jim Storey' Subject: RE: Wilmat 20195 Martin, This is on the maintenance list, for new seals, the leak is minor, on checking the oil level approc 20ml was needed to fill the reservoir Marc
From: Martin Carr [mailto:[email protected]] Sent: 19 September 2013 09:46 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Wilmat 20195 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 23 August 2013 09:48 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Wilmat 20195 Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 31 July 2013 09:28 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Wilmat 20195 Marc,
50
Can you let me have an updated on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 July 2013 10:52 To: 'Marc Horner'; 'Jim Storey' Cc: 'Martin Carr' Subject: RE: Wilmat 20195 Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 November 2012 18:33 To: 'Marc Horner'; 'Jim Storey' Cc: 'Martin Carr' Subject: Wilmat 20195 Marc, Work is required to this item, please advise? Martin. http://hs.carrs‐silver.co.uk/liftingu1.pdf
51
Martin Carr
From: Martin Carr [[email protected]]Sent: 11 October 2013 10:19To: 'Martin Carr'; [email protected]: 'Charles Warriner'Subject: RE: Press 15864
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 20 September 2013 12:37 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 August 2013 10:50 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 August 2013 09:21 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, I need an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 July 2013 10:52 To: 'Martin Carr'; [email protected]
52
Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 11 June 2013 10:58 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 May 2013 09:04 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:25 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:02 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; [email protected]
53
Cc: 'Charles Warriner' Subject: RE: Press 15864 Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 23 April 2012 16:48 To: [email protected] Cc: 'Charles Warriner'; 'Martin Carr' Subject: Press 15864 Please note that this press cannot be returned to service until the work requested has been carried out. http://hs.carrs‐silver.co.uk/press15865.pdf Martin.
54
Martin Carr
From: Martin Carr [[email protected]]Sent: 10 October 2013 09:18To: 'Marc Horner'Cc: 'Martin Carr'Subject: RE: HS Job LPK11051 Lifting Appliance
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you update me on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 20 September 2013 15:36 To: 'Martin Carr' Subject: RE: HS Job LPK11051 Lifting Appliance Martin The load lable may be under a fitting plate, I will have it stripped and checked Note – the equipment hasn’t been used for 12 months and never for more than 40kg ‐ I will check if we can remove it Marc
From: Martin Carr [mailto:[email protected]] Sent: 19 September 2013 09:46 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 23 August 2013 09:48 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 31 July 2013 09:29 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job LPK11051 Lifting Appliance
55
Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 July 2013 10:52 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 06 June 2013 11:29 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you let me know an estimated date when this job will be complete? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 31 May 2013 15:57 To: 'Martin Carr' Subject: RE: HS Job LPK11051 Lifting Appliance To be completed next week
From: Martin Carr [mailto:[email protected]] Sent: 30 May 2013 09:23 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you let me know on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 May 2013 11:15 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Marc,
56
Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 May 2013 07:56 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Marc, I have not had an update on this job for a while, can you let me have an approx date when it will be sorted? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:24 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:02 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:43 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Can you advise how this is progressing? Martin.
57
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:44 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 17 November 2011 15:33 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job LPK11051 Lifting Appliance A quote has been requested for this job.
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job LPK11051 Lifting Appliance
58
From: Martin Carr [mailto:[email protected]] Sent: 28 April 2011 15:34 To: 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Martin Carr' Subject: HS Job LPK11051 Lifting Appliance Jim, Work is required on this item. Full details of the work can be found by going to http://hs.carrs‐silver.co.uk/liftingu1.pdf Martin.
59
Martin Carr
From: Martin Carr [[email protected]]Sent: 10 October 2013 09:18To: [email protected]; 'Jim Storey'Cc: 'Martin Carr'Subject: RE: Pallett Truck 1035008
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you update me on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 19 September 2013 10:07 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Martin, This job is down as a “Fill in” for Maintenance, Marc
From: Martin Carr [mailto:[email protected]] Sent: 18 September 2013 09:42 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 August 2013 10:39 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 STILL awaiting an update? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 July 2013 09:16 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Marc, Still waiting??
60
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 28 June 2013 09:53 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:22 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:05 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 May 2012 18:15 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: Pallett Truck 1035008 Work is required to this item. http://hs.carrs‐silver.co.uk/liftingu1.pdf
61
Martin Carr
From: Martin Carr [[email protected]]Sent: 09 October 2013 09:32To: 'Marc Horner'; 'Jim Storey'Cc: 'Martin Carr'Subject: RE: Manual Fork Truck FT11044
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 17 September 2013 17:33 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Fork Truck FT11044 Martin, Job is still pending – It’s on the maintenance list Marc
From: Martin Carr [mailto:[email protected]] Sent: 17 September 2013 09:56 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Fork Truck FT11044 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 August 2013 09:35 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Fork Truck FT11044 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 July 2013 12:05 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Fork Truck FT11044
62
Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 June 2013 09:04 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Fork Truck FT11044 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:23 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Fork Truck FT11044 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:04 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Fork Truck FT11044 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 May 2012 18:15 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: Manual Fork Truck FT11044 Work is required to this item. http://hs.carrs‐silver.co.uk/liftingu1.pdf
63
Martin Carr
From: Martin Carr [[email protected]]Sent: 08 October 2013 16:50To: 'Marc Horner'Cc: 'Martin Carr'Subject: Graphite Casting
Follow Up Flag: Follow upFlag Status: Flagged
Marc, The filter bags need changing on this machine. See http://hs.carrs‐silver.co.uk/castinggraphite.pdf
64
Martin Carr
From: Martin Carr [[email protected]]Sent: 08 October 2013 16:41To: 'Marc Horner'Cc: 'Charles Warriner'; 'Martin Carr'Subject: LEV 41
Importance: High
Follow Up Flag: Follow upFlag Status: Flagged
Please be advised that this LEV must not be used until the actions on the report below are done. Martin. http://hs.carrs‐silver.co.uk/lev41.pdf
65
Martin Carr
From: Martin Carr [[email protected]]Sent: 08 October 2013 11:53To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey'Cc: 'Charles Warriner'Subject: RE: PT25 Manual Pallet Truck 0043799
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 23 September 2013 09:14 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: 'Charles Warriner' Subject: RE: PT25 Manual Pallet Truck 0043799 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 28 August 2013 09:14 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: 'Charles Warriner' Subject: RE: PT25 Manual Pallet Truck 0043799 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 05 August 2013 11:25 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: 'Charles Warriner' Subject: RE: PT25 Manual Pallet Truck 0043799 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 03 July 2013 09:39 To: 'Marc Horner'; 'Jim Storey'
66
Cc: 'Charles Warriner'; 'Martin Carr' Subject: RE: PT25 Manual Pallet Truck 0043799 Marc, What did you find? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 14 June 2013 08:23 To: 'Martin Carr'; 'Jim Storey' Cc: 'Charles Warriner' Subject: RE: PT25 Manual Pallet Truck 0043799 I cant find it I will look round this afternoon when the factory is shut and it will be binned Marc
From: Martin Carr [mailto:[email protected]] Sent: 13 June 2013 09:41 To: 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: PT25 Manual Pallet Truck 0043799 Can you confirm if this has been scrapped? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 31 May 2013 16:00 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT25 Manual Pallet Truck 0043799 Beyond economic repair, it will be scrapped!
From: Martin Carr [mailto:[email protected]] Sent: 30 May 2013 09:06 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT25 Manual Pallet Truck 0043799 Marc, Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:22 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT25 Manual Pallet Truck 0043799 Can you let me have an update on this job? Martin.
67
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:05 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: PT25 Manual Pallet Truck 0043799 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 May 2012 18:15 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: PT25 Manual Pallet Truck 0043799 Work is required on this job. http://hs.carrs‐silver.co.uk/liftingu1.pdf
68
Martin Carr
From: Martin Carr [[email protected]]Sent: 08 October 2013 11:53To: 'Marc Horner'; '[email protected]'; 'Jim Storey'Subject: RE: Press 16412
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 16 September 2013 11:16 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Martin, Operators reminded about setting cards Other jobs are pending Marc
From: Martin Carr [mailto:[email protected]] Sent: 16 September 2013 09:32 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Marc, Can you advise how this job is progressing? Martin. t: +44 114 263 3203 m: +44 7973 561 502 Skype: martin.carr.woodlands (note always appears off‐line, just call it) Diary Availability: Google Calandar
From: Martin Carr [mailto:[email protected]] Sent: 20 August 2013 11:15 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Marc, I am still awaiting news on this job, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 July 2013 09:11
69
To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 26 June 2013 09:09 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:23 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:04 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 May 2012 09:59 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: Press 16412 Work is required on this press. Refer http://hs.carrs‐silver.co.uk/press16412.pdf
70
Martin Carr
From: Martin Carr [[email protected]]Sent: 07 October 2013 16:56To: 'Marc Horner'Cc: Steve Fish; 'Martin Carr'Subject: Sptayshop LEV
Follow Up Flag: Follow upFlag Status: Flagged
Marc, On the latest LEV report there is some indication that contaminant is escaping and has been found on the exhaust stack. What is the situation with regard to filters, which should stop this? Martin. http://hs.carrs‐silver.co.uk/sprayholbrooklev.pdf
71
Martin Carr
From: Martin Carr [[email protected]]Sent: 07 October 2013 09:42To: 'Martin Carr'; 'Marc Horner'; 'Security Dept'Subject: RE: Security Issues
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 August 2013 11:02 To: 'Martin Carr'; 'Marc Horner'; 'Security Dept' Subject: RE: Security Issues 12/09/2013 08:07 Job deferred due Marc holiday Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 July 2013 09:43 To: 'Marc Horner'; 'Security Dept' Cc: 'Martin Carr' Subject: RE: Security Issues Marc, Can you advise when the balance will be looked at? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 09 July 2013 14:12 To: 'Martin Carr'; 'Security Dept' Subject: RE: Security Issues Martin, Hinges have been modified, Will look into the cladding as an ongoing project Marc
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 09:25
72
To: 'Martin Carr'; 'Marc Horner'; 'Security Dept' Subject: RE: Security Issues Marc, Can you advise on the timescales of this project? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 05 June 2013 09:33 To: 'Martin Carr'; 'Marc Horner'; 'Security Dept' Subject: RE: Security Issues Marc, I think the cladding would be good, especially as the pain is starting to show it needs re‐doing. There is also the hinges.. Martin.
From: Martin Carr [mailto:[email protected]] Sent: 28 May 2013 15:08 To: 'Marc Horner'; 'Security Dept' Cc: 'Martin Carr' Subject: RE: Security Issues Marc, Yes security will look at the ones indicated below. Let me know when the welding on the top will be done on the gates. Mark, Can you advise on the viper issue? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 24 May 2013 18:56 To: 'Martin Carr' Subject: RE: Security Issues
1. Hinged bolts on the side gate – one should be inverted
I will look at issue 1, 2. Keep items away from the rear fence
Suggest pass this task to Security Dept? 3. Pallets should not be stacked in the back yard
Suggest pass this task to Security Dept? 4. Ladders and other tools should not be left in the back yard, as they could be used to gain access
We have no tools/access equipment outside, Suggest monitoring this task to Security Dept? 5. Exterior lighting – this should come on at dusk and only if there is motion, but all the way around the
building and should be bright.
The old chairman’s personal preference was always for lighting in the evening –without motion sensors, I suggest speaking to the lighting contractors you have in?
6. Metal cladding should be applied to the fire doors – maybe roller shutters, but cost may be an issue here. Cheaper option might be vipers on them?
73
Is cost an issue? If not I will have cladding ordered – else don’t we already have Vipers(if they are the sensors I imagine they are)?
Marc
From: Martin Carr [mailto:[email protected]] Sent: 23 May 2013 09:55 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: 'Security Dept' Subject: RE: Security Issues Marc, I am still awaiting an update on this, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 May 2013 10:12 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: 'Security Dept' Subject: RE: Security Issues Marc, Can you let me have an update on this issue? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 April 2013 10:44 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: 'Security Dept' Subject: RE: Security Issues Marc, Can you let me have an update on these jobs? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:26 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: 'Security Dept' Subject: RE: Security Issues Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 15:58 To: 'Martin Carr'; [email protected]; 'Jim Storey'
74
Cc: 'Security Dept' Subject: RE: Security Issues Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 31 July 2012 14:35 To: [email protected]; 'Jim Storey' Cc: 'Security Dept'; [email protected] Subject: Security Issues We have recently had a security review done by the police, copy attached. Obviously if we were to follow everything was given on this it would probably cost £1/4 million! However, I note there are a few minor issues that we should sort;
1. Hinged bolts on the side gate – one should be inverted 2. Keep items away from the rear fence 3. Pallets should not be stacked in the back yard 4. Ladders and other tools should not be left in the back yard, as they could be used to gain access 5. Exterior lighting – this should come on at dusk and only if there is motion, but all the way around the
building and should be bright. 6. Metal cladding should be applied to the fire doors – maybe roller shutters, but cost may be an issue here.
Cheaper option might be vipers on them? Martin.
75
Martin Carr
From: Martin Carr [[email protected]]Sent: 07 October 2013 09:42To: 'Martin Carr'; 'Marc Horner'Subject: RE: HS Job 457 - Press Shop press 2888
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 August 2013 11:01 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job 457 - Press Shop press 2888 12/09/2013 08:07 Job deferred due Marc holiday Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 July 2013 09:43 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job 457 - Press Shop press 2888 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 24 June 2013 09:08 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 457 - Press Shop press 2888 Marc, I am awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:25 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 457 - Press Shop press 2888
76
Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:01 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 457 - Press Shop press 2888 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 457 - Press Shop press 2888 This job remains outstanding on the latest inspection report, please advise?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 457 - Press Shop press2888.pdf Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:46 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 457 - Press Shop press2888.pdf
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 457 - Press Shop press2888.pdf
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 457 - Press Shop press2888.pdf
77
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 457 - Press Shop press2888.pdf
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 457 - Press Shop press2888.pdf
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 457 - Press Shop press2888.pdf
From: Martin Carr [mailto:[email protected]] Sent: 16 June 2011 15:32 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 457 - Press Shop press2888.pdf Jim, This job remains outstanding on the latest report. Can you advise when this will be completed? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 April 2011 14:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 457 - Press Shop Jim, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2011 15:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 457 - Press Shop
78
Jim, Can you advise on progress on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 January 2011 12:34 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Subject: HS Job 457 - Press Shop Can you please advise on the status of this job?
From: Martin Carr [mailto:[email protected]] Sent: 15 November 2010 16:20 To: 'Martin Carr'; 'Jim Storey' Cc: 'Jack Wood' Subject: HS Job 457 - Press Shop
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2010 15:38 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 457 - Press Shop
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2010 16:12 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 457 - Press Shop Please advise
From: Martin Carr [mailto:[email protected]] Sent: 13 August 2010 12:18 To: 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 457 - Press Shop The following HS job is still outstanding. Can you please let me have an update on progress? Martin.
457 http://hs.carrs‐silver.co.uk/press2888.pdf 16 June 2010 Work required 13 August 2010 Requested update from Jim Storey 27 Sept 2010 Requested update from Jim Storey on this job 18 Oct 2010 Requested update from Jim Storey 15 Nov 2010 Requested update from Jim Storey
79
Martin Carr
From: Martin Carr [[email protected]]Sent: 07 October 2013 09:42To: 'Martin Carr'; 'Marc Horner'Subject: RE: Press 9
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 August 2013 11:02 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 9 12/09/2013 08:07 Job deferred due Marc holiday Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 July 2013 09:42 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 9 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 24 June 2013 09:08 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 9 Marc, Can you update me on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:29 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Press 9 Can you let me have an update on this job?
80
Martin.
From: Marc Horner [mailto:[email protected]] Sent: 27 July 2012 15:06 To: 'Martin Carr' Subject: RE: Press 9 Previous issue complete, New comments from last inspection, added to maintenance list
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Charles Warriner'; [email protected] Subject: RE: Press 9 Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 30 March 2012 18:58 To: 'Martin Carr'; 'Lee Waters'; 'Charles Warriner'; [email protected] Cc: 'Richard Carr' Subject: RE: Press 9 From: Marc Horner [mailto:[email protected]] Sent: 30 March 2012 15:39 To: 'Martin Carr'; 'Lee Waters'; 'Charles Warriner' Cc: 'Richard Carr' Subject: RE: Press 9 Martin, This is an operator training issue, the missing fixing is a capscrew ‐ 2 of which are removed to access the press and only 1 is replaced.. I will speak to Charles/Tony Smith re this issue
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:42 To: 'Martin Carr'; 'Lee Waters'; 'Charles Warriner'; [email protected] Cc: 'Richard Carr' Subject: RE: Press 9
From: Martin Carr [mailto:[email protected]] Sent: 13 January 2012 07:47 To: 'Martin Carr'; 'Lee Waters'; 'Charles Warriner' Cc: 'Richard Carr' Subject: RE: Press 9 Tony, I am still awaiting an update on this job, please advise?
81
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 December 2011 17:06 To: 'Lee Waters'; 'Charles Warriner' Cc: 'Martin Carr'; 'Richard Carr' Subject: Press 9 Tony, Can you comment on these guarding matters? http://hs.carrs‐silver.co.uk/press9.pdf Martin.
82
Martin Carr
From: Martin Carr [[email protected]]Sent: 07 October 2013 09:42To: 'Martin Carr'; 'Marc Horner'Subject: RE: Press 1b
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 August 2013 09:36 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 1b 11/09/2013 09:17 Deferred due Marc holiday Marc, Can you advise when this job will be done? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 July 2013 11:48 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 1b Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 15:35 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 1b Marc, Work is required to this press; http://hs.carrs‐silver.co.uk/press1b.pdf Martin.
83
Martin Carr
From: Martin Carr [[email protected]]Sent: 04 October 2013 09:24To: 'Martin Carr'; 'Marc Horner'Subject: RE: Press 3b
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 August 2013 09:37 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3b 10/09/2013 09:43 Deferred due Marc holiday Marc, Can you advise when this job will be done? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 July 2013 11:48 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3b Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 15:32 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 3b Marc, Work is required on this press; http://hs.carrs‐silver.co.uk/press3b.pdf Martin.
84
Martin Carr
From: Martin Carr [[email protected]]Sent: 04 October 2013 09:24To: 'Martin Carr'; 'Marc Horner'Subject: RE: Press 2995
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 August 2013 09:35 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 2995 10/09/2013 09:43 Deferred due Marc holiday Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 11 July 2013 08:24 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 2995 Marc, Can you advise when this is scheduled? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 15:24 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 2995 Marc, Work is required on this press as per; http://hs.carrs‐silver.co.uk/press2995.pdf Martin.
85
Martin Carr
From: Marc Horner [[email protected]]Sent: 03 October 2013 11:29To: 'Martin Carr'Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13Attachments: image001.jpg
Follow Up Flag: Follow upFlag Status: Flagged
Martin,
The Builder who was going to put up the room for the moved knife handle area quoted on this, and as this is delayed the wall was also
There are no risks to the wall at the moment
Marc
From: Martin Carr [mailto:[email protected]] Sent: 30 September 2013 10:16 To: 'Martin Carr'; 'Marc Horner' Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
Marc,
Can you advise on this job?
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 August 2013 13:37 To: 'Martin Carr'; 'Marc Horner' Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
05/09/2013 09:31 Deferred due to Marc on holiday
Marc,
What has become of this wall?
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 10 July 2013 11:12 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
Marc,
Has this wall been fixed now?
Martin.
86
From: Marc Horner [mailto:[email protected]] Sent: 20 May 2013 08:51 To: Martin Carr Subject: FW: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
FYI – report from Structural Engineer on wall in despatch.
18/06/2013 09:34 Has wall been fixed
From: Andy Jones [mailto:[email protected]] Sent: 16 May 2013 11:38 To: [email protected] Subject: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
Marc,
We confirm for your records our inspection of cracking in an internal wall in the factory on 10 May 2013. The wall is built using concrete blocks tied to the steel portal column at one end and to an secondary steel stability post at the other end. The wall length is in the order of 7m, broken by a double door at approximately one third from the portal column end. A near vertical crack has developed from the lintel bearing to the top of the wall. This is shown on the attached sketch 35913/SK01.
We believe the crack has developed in response to normal building thermal movements, possibly aggravated by the occasional collision from fork lift truck movements in the factory. We advised you that the crack does not affect the stability of the wall, nevertheless it would be prudent to provide nominal steel bar stitching across the crack before pointing and re-decorating. These ties are to help distribute the movement from the crack back into the wall to stop fretting on the crack line in the future.
We have suggested Helifix Crack Stitching as a recognised proven proprietary crack repair system. Details are shown on the attached PDF copy of the manufacturers literature for your reference.
If there should be any further queries please contact us again.
Regards
Andy Jones (Associate)
Eastwood & Partners (Consulting Engineers) Ltd St Andrew's House, 23 Kingfield Road, Sheffield, S11 9AS Web: www.eastwoodandpartners.com Tel. 0114 2554554 Email: [email protected] Fax. 0114 2554330 Please Read: Information in this message is confidential and may be legally privileged. It is intended solely for the person to whom it is addressed. If you are not the intended recipient, please notify the sender and delete the message from your system immediately. It is your responsibility to check this email for viruses and Eastwood & Partners cannot be held responsible for any resulting loss or damage in the event that this message or any attachments contains a virus.
87
Martin Carr
From: Marc Horner [[email protected]]Sent: 03 October 2013 10:50To: 'Martin Carr'Subject: RE: Rolling Mill Chopper Guarding
Follow Up Flag: Follow upFlag Status: Flagged
Martin, This is on the list for Maint. as a fill in job, guarding has been like this for 20+ years and you would have to deliberately attempt to put fingers through the guards Marc
From: Martin Carr [mailto:[email protected]] Sent: 26 September 2013 11:32 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Rolling Mill Chopper Guarding Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 August 2013 09:13 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Rolling Mill Chopper Guarding 03/09/2013 09:10 Marc on holiday, job deferred Marc, Can you advise on this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 July 2013 11:28 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Rolling Mill Chopper Guarding Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 08:45 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Rolling Mill Chopper Guarding
88
Marc, There needs to be some extra sheeting added over the current mesh guarding on the machine by the fork truck. While there is guarding there at the moment, it is possible to push your finger through it and contact with the belts behind. Martin.
89
Martin Carr
From: Martin Carr [[email protected]]Sent: 03 October 2013 09:32To: 'Martin Carr'; 'Jim Storey'Cc: [email protected]: RE: HS Job PT20
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 August 2013 09:31 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 13/09/2013 15:55 Deferred due Marc holiday Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 July 2013 09:47 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Marc, Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 25 June 2013 10:12 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Marc, I still need an update for this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:24
90
To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:02 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:43 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job PT20 Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:44 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job PT20
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job PT20
91
From: Martin Carr [mailto:[email protected]] Sent: 17 November 2011 15:34 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job PT20 A quote has been requested for this job.
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job PT20
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job PT20
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job PT20
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job PT20
From: Martin Carr [mailto:[email protected]] Sent: 28 April 2011 15:34 To: 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Martin Carr' Subject: HS Job PT20 Jim, Work is required on this item. Full details of the work can be found by going to http://hs.carrs‐silver.co.uk/liftingu1.pdf Martin.
92
Martin Carr
From: Martin Carr [[email protected]]Sent: 02 October 2013 10:51To: 'Martin Carr'; 'Marc Horner'Subject: RE: Press 4
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 August 2013 09:36 To: 'Marc Horner'; 'Martin Carr' Subject: RE: Press 4 09/09/2013 09:14 Deferred due Marc holiday Marc, Can you advise when this job will be doen? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 11 July 2013 09:14 To: 'Martin Carr' Subject: RE: Press 4 This press is currently not in operation, We have to incorporate guard master switches into the safety circuit, and will not be allowing the press back into operation until insurance inspection is satisfactory Marc
From: Martin Carr [mailto:[email protected]] Sent: 11 July 2013 08:25 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 4 Marc, Can you advise when this is due to be completed? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 15:30
93
To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 4 Marc, Work is required on this press; http://hs.carrs‐silver.co.uk/press4.pdf Martin.
94
Martin Carr
From: Martin Carr [[email protected]]Sent: 02 October 2013 10:51To: 'Martin Carr'; 'Marc Horner'Subject: RE: Press 3042
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 13 August 2013 09:35 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3042 09/09/2013 09:14 Deferred due Marc holiday Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 July 2013 11:48 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3042 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 15:50 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 3042 Marc, Work is required on this press; http://hs.carrs‐silver.co.uk/pres3042.pdf Martin.
95
Martin Carr
From: Martin Carr [[email protected]]Sent: 30 September 2013 10:16To: 'Martin Carr'; 'Marc Horner'Subject: RE: HS 431. Extractor hoods for spray shop drying process
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 August 2013 13:37 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 431. Extractor hoods for spray shop drying process 05/09/2013 09:31 Deferred due to Marc on holiday Still waiting for an update? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 10 July 2013 11:15 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 431. Extractor hoods for spray shop drying process Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 09:23 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, I am still awaiting an update on this item? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 05 June 2013 09:32 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, Now that summer is here can you advise on the timetable for this project?
96
Martin.
From: Marc Horner [mailto:[email protected]] Sent: 14 March 2013 22:36 To: 'Martin Carr' Subject: RE: HS 431. Extractor hoods for spray shop drying process Hi Martin, At present I need to re‐look at the ducting in the entire area due to some comments from the LEV inspector, I want to split the Plating from the spray shop (with solid doors rather than flaps), open up the filters in the walls to allow more air to circulate, re‐route the 2 into 1 ducting from resin area and Left hand booth and probably remove the resin booth altogether Intending to start this in the summer if that’s OK Marc
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2013 09:48 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, Can you advise what is happening with regard to this job? Most of the fume does seem to be coming from the drying process.. Perhaps we need to get an extraction company in to provide come information and maybe a quote? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 March 2013 10:42 To: 'Martin Carr'; 'Jim Storey' Cc: '[email protected]' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, Can you advise what is happening with regard to this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 February 2013 22:46 To: 'Martin Carr'; 'Jim Storey' Cc: '[email protected]' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, What is the deal with this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:26
97
To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:00 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 June 2012 11:17 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process There has been a discussion about this and a company has come in to quote for a few items. The main points are;
1. The electrical to be changed for explosive atmospheres with regard to the enclosed spray shop 2. Installing a fan so that suitable air can enter the building, equal to what is being extracted. 3. Change the existing 3 spraybooths and resin mixing areas so that only extraction that is required is being
used. 4. Get some quotes for the heating in this area to be improved.
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:41 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process Can you advise how this is progressing? Martin.
98
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:47 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 15 April 2011 14:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 431. Extractor hoods for spray shop drying process Jim, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2011 15:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'
99
Cc: 'Richard Carr' Subject: HS 431. Extractor hoods for spray shop drying process Jim, Can you advise on progress on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 January 2011 12:34 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Subject: HS 431. Extractor hoods for spray shop drying process Can you please advise on the status of this job?
From: Martin Carr [mailto:[email protected]] Sent: 15 November 2010 16:20 To: 'Martin Carr'; 'Jim Storey' Cc: 'Jack Wood' Subject: 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2010 15:38 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2010 16:19 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: 431. Extractor hoods for spray shop drying process Please advise
From: Martin Carr [mailto:[email protected]] Sent: 13 August 2010 11:22 To: 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: 431. Extractor hoods for spray shop drying process The following HS job is still outstanding. Can you please let me have an update on progress? Martin.
431. Extractor hoods for spray shop drying process 24 February 2010 Jim to investigate 04 June 2010 Job outstanding, but the area is being re‐located, so will be done at that time 13 August 2010 Requested update from Jim Storey
100
27 Sept 2010 Requested update from Jim Storey on this job 18 Oct 2010 Requested update from Jim Storey 15 Nov 2010 Requested update from Jim Storey
101
Martin Carr
From: Martin Carr [[email protected]]Sent: 27 September 2013 09:52To: 'Martin Carr'; 'Marc Horner'Subject: RE: Casting Soleniod Valve
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 August 2013 10:55 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Casting Soleniod Valve 03/09/2013 19:10 Deferred due to Marc holiday Marc, I am still awaiting an update on this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 July 2013 09:45 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Casting Soleniod Valve Date? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 June 2013 09:32 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Casting Soleniod Valve Marc, I am still awaiting a date for this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 03 June 2013 10:33 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Casting Soleniod Valve Can you advise of an approx completion date? Martin.
102
From: Marc Horner [mailto:[email protected]] Sent: 24 May 2013 18:57 To: 'Martin Carr' Subject: RE: Casting Soleniod Valve Its on the list
From: Martin Carr [mailto:[email protected]] Sent: 23 May 2013 09:53 To: 'Marc Horner'; 'Security Dept'; 'Martin Carr' Subject: RE: Casting Soleniod Valve Marc, I am still awaiting an update on this, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 May 2013 15:35 To: 'Marc Horner'; 'Security Dept' Cc: 'Martin Carr' Subject: Casting Soleniod Valve Marc, This valve is not working, can you advise when it will be fixed? Martin.
103
Martin Carr
From: Martin Carr [[email protected]]Sent: 27 September 2013 09:52To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey'Cc: [email protected]: RE: HS Job Oakland Lift
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 August 2013 10:55 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift 03/09/2013 19:10 Deferred due to Marc holiday Marc, I am still awaiting an update on this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 July 2013 09:45 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, I am still awaiting this quote? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 June 2013 09:32 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, Can you advise on this quote? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 03 June 2013 10:31 To: 'Marc Horner'; 'Jim Storey'
104
Cc: '[email protected]' Subject: RE: HS Job Oakland Lift Marc, Were you going to get a quote for doing this? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 24 May 2013 18:50 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift I think that as its non‐urgent and we constantly keep it to the bottom of the list I will try and sub‐contract the maintenance of this
From: Martin Carr [mailto:[email protected]] Sent: 23 May 2013 09:55 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, This needs to be sorted soon, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 May 2013 10:13 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, What is happening with regard to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 April 2013 10:47 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, I think this sump pump needs some immediate attention. Martin.
From: Martin Carr [mailto:[email protected]] Sent: 25 April 2013 11:01 To: 'Martin Carr'; 'Jim Storey'
105
Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, Can you advise when this job will be done, approx? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 April 2013 14:06 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, Can you advise when this oil leak will be sorted? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 November 2012 18:33 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, There are just a few minor issue outstanding with regard to this, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:02 To: 'Martin Carr'; 'Jim Storey' Cc: 'Charles Warriner'; [email protected] Subject: RE: HS Job Oakland Lift Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: 'Charles Warriner'; [email protected] Subject: RE: HS Job Oakland Lift Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 18 May 2012 10:27 To: 'Martin Carr'; 'Jim Storey'
106
Cc: 'Richard Carr'; 'Charles Warriner'; [email protected] Subject: RE: HS Job Oakland Lift Can you advise on progress? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:43 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner'; [email protected] Subject: RE: HS Job Oakland Lift Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:45 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner'; [email protected] Subject: RE: HS Job Oakland Lift
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner' Subject: RE: HS Job Oakland Lift
From: Martin Carr [mailto:[email protected]] Sent: 11 November 2011 19:27 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner' Subject: RE: HS Job Oakland Lift Jim, We have just received the latest report and this item is still outstanding, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner' Subject: RE: HS Job Oakland Lift
From: Martin Carr [mailto:[email protected]] Sent: 05 October 2011 17:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'
107
Cc: 'Richard Carr'; 'Charles Warriner' Subject: RE: HS Job Oakland Lift Jim, Is this something you are going to sort or shall I get the lift engineers to fix it? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job Oakland Lift
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job Oakland Lift
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job Oakland Lift
From: Martin Carr [mailto:[email protected]] Sent: 28 April 2011 15:34 To: 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Martin Carr' Subject: HS Job Oakland Lift Jim, Work is required on the Oakland lift. For the full report see http://hs.carrs‐silver.co.uk/oaklandlift.pdf Martin.
108
Martin Carr
From: Martin Carr [[email protected]]Sent: 25 September 2013 10:30To: 'Martin Carr'; 'Marc Horner'Subject: RE: Silverware Good Lift
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 August 2013 09:57 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Silverware Good Lift Marc, Can you let me have an update? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 August 2013 09:12 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Silverware Good Lift Marc, What has become of this contract? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 July 2013 23:44 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Silverware Good Lift Can you advise how you got on with this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 June 2013 12:51 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Silverware Good Lift Marc, How is this going in terms of sub‐contracting it?
109
Martin.
From: Marc Horner [mailto:[email protected]] Sent: 24 May 2013 18:57 To: 'Martin Carr' Subject: RE: Silverware Good Lift I think that as its non‐urgent and we constantly keep it to the bottom of the list I will try and sub‐contract the maintenance of this
From: Martin Carr [mailto:[email protected]] Sent: 22 May 2013 13:39 To: 'Jim Storey'; [email protected] Subject: RE: Silverware Good Lift Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 May 2013 17:55 To: 'Martin Carr'; 'Jim Storey'; [email protected] Subject: RE: Silverware Good Lift This job remains outstanding on the latest report, can you advise on progress? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 May 2013 07:52 To: 'Martin Carr'; 'Jim Storey'; [email protected] Subject: RE: Silverware Good Lift Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 23 April 2013 08:53 To: 'Martin Carr'; 'Jim Storey'; [email protected] Subject: RE: Silverware Good Lift Marc, Can you advise when this job will be complete? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 November 2012 18:33 To: 'Jim Storey'; [email protected] Cc: 'Martin Carr' Subject: RE: Silverware Good Lift
110
This is still showing outstanding work as per the previous report, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:04 To: 'Martin Carr'; 'Jim Storey'; [email protected] Subject: RE: Silverware Good Lift Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 May 2012 10:22 To: 'Jim Storey'; [email protected] Cc: 'Martin Carr' Subject: Silverware Good Lift Work is required on this lift. http://hs.carrs‐silver.co.uk/silvergoodslift.pdf
111
Martin Carr
From: Martin Carr [[email protected]]Sent: 15 August 2013 08:56To: 'Marc Horner'; '[email protected]'; 'Jim Storey'Subject: RE: Press 15865
Follow Up Flag: Follow upFlag Status: Flagged
06/09/2013 09:14 Deferred due to Marc holiday Marc, Still waiting? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 July 2013 09:14 To: 'Martin Carr'; 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 20 June 2013 08:44 To: 'Martin Carr'; 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, Still waiting? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 10 June 2013 11:36 To: 'Martin Carr'; 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, I am still awaiting a reply on this matter? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 28 May 2013 09:50 To: 'Marc Horner'; '[email protected]'; 'Jim Storey' Subject: RE: Press 15865 Can you advise on an approx date when this will be done?
112
Martin.
From: Marc Horner [mailto:[email protected]] Sent: 10 May 2013 14:00 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Martin due to breakdowns on other machinery we have not looked at this yet Marc
From: Martin Carr [mailto:[email protected]] Sent: 10 May 2013 10:06 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, Can you please advise how this job is going? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 April 2013 10:45 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, Can you advise how this job is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:23 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:04 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Can you let me have an update to this job? Martin.
113
From: Martin Carr [mailto:[email protected]] Sent: 22 May 2012 10:01 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: Press 15865 Work is required on this press. Refer http://hs.carrs‐silver.co.uk/press15865.pdf
114
Martin Carr
From: Martin Carr [[email protected]]Sent: 15 August 2013 08:57To: 'Martin Carr'; '[email protected]'; 'Jim Storey'Cc: '[email protected]'Subject: RE: Press 17200
Follow Up Flag: Follow upFlag Status: Flagged
06/09/2013 09:14 Deferred due to Marc holiday Marc, Still waiting? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 July 2013 11:19 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: [email protected] Subject: RE: Press 17200 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 June 2013 09:34 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: [email protected] Subject: RE: Press 17200 Marc, I have not had an update on this job, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 December 2012 19:23 To: [email protected]; 'Jim Storey' Cc: [email protected] Subject: Press 17200 Please note that work is required on this press. See http://hs.carrs‐silver.co.uk/press17200.pdf for details. Martin.