Marks USA Custom Lockset Division product is manufactured ... · P *( 1 Lifetime Mechanical Limited...
Transcript of Marks USA Custom Lockset Division product is manufactured ... · P *( 1 Lifetime Mechanical Limited...
-
Page 1
Lifetime Mechanical Limited Warranty
MARKS USA warrants that its products are free from defects in materials and workmanship. This warranty is limited to the lifetime of the door on
which our lock is installed. In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge.
This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and
handling, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-MARKS products or parts. We reserve
the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replace-
ment of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages.
Additionally, the company will not warrant ANSI A156.2 Grade 2 lever product installed in educational facilities and student housing.
Marks USA Custom Lockset Division product is manufactured with the quality engineered
mechanical locksets that carry our Lifetime Mechanical Warranty. These products are
non-stocked due to the large array of both designs and finishes and thus require longer
lead times and minimum order quantities. This catalogue is only a sampling of the designs
that can be supplied. Standard mortise & tubular lock trim are usually stocked and are
available in normal lead times.
MARKS USA CUSTOM LOCKSET DIVISION
Table of Contents:
Stainless Steel Investment Cast Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-14
Stainless Steel Tubular Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-19
Standard Mortise & Tubular Lock Trim & Rose Styles . . . . . . . . . . . . . . . . .20
Custom Forged Brass Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Turnpieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Custom Forged Brass Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Custom Escutcheon Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-26
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA
Common pin tumbler cylinders may be compromised by picking, drilling or key bumping.
For applications where a greater security level is required, we suggest using drill/pick resistant cylinders with multiple pin planes such as those with sidebars.
Marks USA HI-SECURITY™ Cylinders are constructed with sidebars and are drill, pick and bump resistant.
HI-SECURITY
-
5-1/2"
2-3/8"
4-7/16"
2-3/8"
5-9/16"
2-5/8"
5-5/16"
2-3/4"
SF003
SF005 SF006
SF004
5-1/8"
2-9/16"
4-23/32"
2-7/16"
SF001 SF002
5"
3-1/16"
5-5/16"
2-3/16"
SF007 SF008
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
4-11/16"
2-1/2"
SF009
5-1/8"
2-13/16"
SF010
5-15/16"
2-13/16"
SF011
4-5/8"
2-1/2"
SF012
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 2
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 3
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
4-13/16"
2-5/8"
SF014
4-1/2"
2-5/8"
SF013
4-3/16"
2-3/4"
SF015 SF016
5-1/8"
2-13/16"
SF018
4-15/16"
2-15/16"
SF017
5-11/16"
2-13/16"
SF019 SF020
5-1/2"
2-5/8"
5-5/16"
2-5/8"
5-5/16"
2-15/16"
SF021 SF022
5-5/16"
2-13/16"
SF023
5-5/16"
2-5/8"
SF024
4-13/16"
2-11/16"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 4
5"
2-23/32"
SF026
5"
2-15/16"
SF029
5-1/16"
2-1/2"
SF0314-3/4"
2-23/32"
SF030
5-1/8"
2-23/32"
SF032
5-5/16"
2-15/16"
SF033
5-5/8"
2-13/16"
SF034
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5-5/16"
2-23/32"
SF035A
5-5/16"
2-13/16"
SF025
5-5/16"
2-15/16"
SF027
5-5/16"
2-23/32"
SF035
5-1/8"
2-13/16"
SF036
-
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5-5/16"
2-13/16"
SF037
5-5/16"
2-7/8"
SF038
5-5/16"2-13/16"
SF041
5-11/16"2-13/16"
SF043
5-5/16"
2-13/16"
SF037A
5-3/8"
2-13/16"
SF040
5-5/16"
2-13/16"
SF042
5-1/8"
2-1/4"
SF044
SF045
4-5/8"
2-7/16"
SF046
5-1/8"
2-15/16"
SF047
5-5/16"
2-19/64"
SF048
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 5
4-23/32"
2-23/32"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 6
5-11/16"
2-7/8"
SF057
5-1/8"
2-7/8"
SF058
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5-1/8"
2-3/8"
SF053
5"
2-7/8"
SF056
5-11/16"
2-7/16"
SF054
5"
2-3/32"
SF055
5-1/4"
2-5/16"
SF059
4-1/2"
2-7/16"
SF060
5-5/32"
2-15/16"
SF049
5-1/8"2-5/16"
SF051
4-23/32"
2-13/16"
SF050
5"
2-7/16"
SF061
-
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5-1/16"
2-3/32"
SF062
4-21/64"
2-3/16"
SF071
5-1/8"
3"
SF067
5-3/16"
3-3/16"
SF0654-7/8"
2-5/8"
SF064
5-1/2"
2-9/16"
SF063
4-15/16"2-7/16"
SF068
4-1/2"
2-3/16"
SF070
4-21/64"2-3/16"
SF073
4-21/64"
2-9/16"
SF072
5-1/8"
2-3/4"
SF069
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 7
5-1/8"
2-1/4"
SF074
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 8
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
4-15/16"
2-3/4"
SF082
4-7/8"
2-5/16"
SF0844-7/16"
2-1/8"
SF085
5-1/2"
2-3/4"
SF086
4-21/64"
2-3/16"
SF075
4-5/8"
2-13/16"
SF077
4-3/4"2-15/16"
SF080
4-11/16"
2-3/8"
SF076
5-19/32"2-13/16"
SF078
4-27/32"2-3/4"
SF081
5-7/16"2-3/4"
SF083
5-1/2"
2-13/16"
SF087
-
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
SF095
4-23/32"2-7/16"
SF097
SF088
5-1/2"
2-3/16"
SF089
5-5/16"
2-11/16"
SF093
5-1/8"
2-13/16"
SF091
5-5/16"
2-9/16"
SF090
5"
2-13/16"
SF092
SF094
SF096
SF098
5-1/16"2-1/16"
5-1/8"2-7/16"
4-7/32"
2"
5-9/32"2-3/32"
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 9
5-1/8"
2-1/2"
SF099
6"
2-11/16"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 10
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5-5/16"
2-3/8"
4-11/16"2-1/2"
4-3/8"2-1/2"
5-13/64"2-21/32"
5-3/16"2-3/4"
5-15/16"
2-3/8"
SF101
SF103
SF105
SF107
SF109
SF100
SF102
SF104
4-1/2"2-3/16"
4-1/2"2-3/16"
6-7/64"
2-5/8"
SF106
SF108
SF110
4-5/8"
2-7/16"
4-9/16"
2-5/8"
5-1/2"2-3/16"
SF111
-
5-5/16"
2-13/16"
5-5/16"
2-13/16"
5-1/8"
2-7/8"
5-5/16"
2-7/8"
5-13/16"
2-11/16"
5-5/16"
2-13/16"
4-27/32"
2-7/16"
5-19/32"
2-13/16"
6"
2-13/16"
5-5/16"
2-9/16"
SF113
SF115
SF117
SF119
SF121
SF112
SF114
SF116
SF120
SF122
SF118
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 11
2-5/8"
5-9/32"
2-13/16"
SF123
5-1/2"
2-3/16"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 12
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5"
2-5/8"
5-1/8"2-7/16"
5-3/16"
2-5/8"
5-5/16"
2-13/16"
5-1/2"
3"2-5/8"
5-5/16"
2-13/16"
5-5/16"
2-13/16"
5-1/8"
2-13/16"
5-5/16"
2-13/16"
4-1/8"
SF125
SF127
SF130
SF132
SF134
SF126
SF128
SF131
SF133
SF135
3"
5-5/16"
2-11/16"
5-1/8"
2-5/8"
SF136 SF137
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 13
4-15/16"2-15/16"
5-15/64"
2-7/16"
5-23/64"
2-1/2"
5-25/64"
2-13/16"
8-1/16"
3-1/16"
5-9/32"
2-13/16"
5-5/64"
2-3/4"
4-27/32"
2-15/16"
6-1/2"
2-13/16"
SF138
SF140
SF142
SF145
SF147
SF139
SF141
SF144
SF146
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5"
2-3/4"
SF149 SF150
4-15/16"
2-15/16"
5-1/8"
2-5/8"
SF148
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 14
STAINLESS STEEL INVESTMENT CAST LEVER HANDLE
FOR GRADE 1 MORTISE & TUBULAR LOCKSETS
SF151
SF153
SF155
SF157
SF160
LH23 LH32
SF161
SF152
SF154
SF156
SF158
5-1/8"2-7/16"
5-3/4"
2-23/32"
5-1/2"
2-27/32"
4-21/32"
2-7/16"
5-1/2"2-7/16"
5-11/16"
2-23/32"
5-5/32"
2-9/16"
5-5/16"
3-3/8"
5-5/16"
2-1/2"
5-1/8"
2-9/16"
5-5/16"
2-1/2"
5"
2"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 15
STAINLESS STEEL TUBULAR LEVERS
FOR TUBULAR LOCKSETS
5-1/2"
SD001
5-5/16"
2-13/16"
SD002
5-5/16"
2-13/16"
5-5/16"
2-13/16"
SD002B
SD0045-5/16"
2-15/16"
SD003
5-5/16"
2-13/16"
SD005
4-23/32"
2-7/16"
SD006
2"
5-5/16"
2-13/16"
2-13/16"
SD002A
5-1/2"
2-13/16"
SD007
5-5/16"
2-13/16"
SD008
5-5/16"
2-13/16"
SD009
5-5/16"
2-13/16"
SD010
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 16
STAINLESS STEEL TUBULAR LEVERS
FOR TUBULAR LOCKSETS
2-7/16"
SD011
5-5/16" 5-5/16"
2-13/16"
SD012
5-1/8"
2-13/16"
5-11/16"
2-13/16"
SD013 SD014
5"
2-13/16"
SD015
5"2-13/16"
SD015A
5-5/16"
2-13/16"
SD018
SD020
5-5/16"
2-13/16"
SD019
SD0215-5/16"
2-13/16"
5-5/16"
2-13/16"
5-5/16"
2-13/16"
SD017SD0165-5/16"
2-13/16"
2-7/16"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 17
STAINLESS STEEL TUBULAR LEVERS
FOR TUBULAR LOCKSETS
2-13/16"
SD022
SD024
SD026
SD028
SD030
SD032
5-1/2"
2-13/16"
5-1/2"
2-5/8"5-5/16"
2-13/16"5-5/16"
2-13/16"
5-1/2"
3-1/2"5-1/2"
5-1/2"
2-13/16"
SD023
SD025
SD027
SD029
SD031
SD033
5-5/16"
2-13/16"
5-5/16"2-13/16"
5-29/32"2-13/16" 2-7/16"
3-11/32"2-7/16" 3-29/32"7-23/32"
2-3/4"
2-13/16"
5-25/64"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 18
STAINLESS STEEL TUBULAR LEVERS
FOR TUBULAR LOCKSETS
SD034 SD035
5-5/16"
2-23/32"
5-5/16"
2-7/8"
5-5/16"
2-13/16"
5-5/16"
2-13/16"
5-5/16"
2-13/16"
5-5/16"
2-5/8"
4-15/16"2-5/8"
4-27/32"2-5/8"
5-5/16"
2-13/16"
5-13/16"
2-13/16"
5-5/16"
2-13/16"
5-29/32"
3-3/16"
SD038
SD040
SD042
SD046 SD047
SD043
SD039
SD041
SD036 SD037
2-13/16"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 19
STAINLESS STEEL TUBULAR LEVERS
FOR TUBULAR LOCKSETS
5-5/16"
2-1/2"
4-15/16"
3"
5-1/2"
3"
5-1/8"
2-5/8"
5-29/32"2-3/32"
5-1/2"
3"
5-5/16"
2-13/16"
5-25/64"2-11/16"
5-5/16"2-23/32"
SD051
SD053
SD056
SD058
SD049SD048
SD050
SD052
SD054
SD057
SD062 SD063
SD064
SD066
4-23/32"
2-9/16"
5-3/16"
2-13/16"
5-5/16"
2-23/32"
5-1/2"2-7/8" 2-9/32"
5-5/16"2-11/16"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 20
STANDARD MORTISE & TUBULAR LOCK TRIM
& ROSE STYLES
ROuND 10
ROSE RR ROSE Rw ROSE RS ROSE Rx
plaza 82
Ball 20/30
MaDiSON 52
Dayton 83MONacO 57
cREScENT 86TOwNE 72
aMERicaN 92
4"
2-1/2"
7/16"
2-9/16"
2-1/2"
2-1/4"
7/16"
2-9/16"
TiTaN 96
4-1/2"7/16"
2-9/16"
2-7/8"
OMNi 78
4-1/4"7/16"
2-9/16"
2-5/8"
MaxwEll 77
4-1/4"7/16"
2-9/16"
2"
7/16"
2-9/16" 2-3/16"
3"
1/2"
7/16"
2-9/16"
3"
4-1/2"
4-1/2"7/16"
2-9/16"
2-3/4"
2-1/2"
7/16"
2-9/16"
2-3/4"
1/2"
4-1/2"7/16"
2-9/16"
3-1/8"
4"
2-1/2"
7/16"
2-1/4"
2"
4-1/2"7/16"
2-9/16"
2-3/4"
7/16"
2-9/16"
2"
3-3/4"
2-9/16"
7/16"
2-9/16"
7/16"
2-9/16"
7/16"7/16"
2-1/4"
ROSE RQ
7/16"
2-1/4"
EclipSE 60
STaNhOpE 5644
NOTE: Roses are available in a wide variety of finishes
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 21
CUSTOM FORGED BRASS LEVERS
5321 5601
4-3/4"
2-7/16"
4-3/8"
2-1/2"
4-3/16"
3-15/16"
5671
3-1/2"
2-13/16"
5681
PL-AL
PL-AR
4-1/2"
2-5/16"
5636
4-1/4"
2-5/16"
5678
5"
2-5/16"4-5/8"
2-7/16"
5-5/8"
2-11/16"
5-5/8"
2-11/16"
5348BA-L
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 22
TURNPIECES
1-3/4"
1-3/16"
2-5/16"
1-7/16"
OPTION CODE T4Base Metal: Brass & Stainless Steel
OPTION CODE T5Base Metal: Stainless Steel
OPTION CODE T6Base Metal: Stainless Steel
OPTION CODE T3Base Metal: Zinc
OPTION CODE T2Base Metal: Stainless Steel
OPTION CODE T1Base Metal: Brass & Stainless Steel
OPTION CODE T7Base Metal: Brass
OPTION CODE T9Base Metal: Stainless Steel
OPTION CODE T8Base Metal: Stainless Steel
OPTION CODE T16Base Metal: Stainless Steel
15/16"
15/16"
27/32"
1-3/8"
1-5/8"
15/16"
1-1/2"
15/16"
1-3/4"
15/16"
1-15/16"
1-11/16"
1-3/4"
15/16"
1-15/16"
1-11/16"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 23
CUSTOM FORGED BRASS TRIM
CUSTOM 1
19"
3"
2-1/4"
7-5/8"
4"
8"
CUSTOM 2
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 24
CUSTOM ESCUTCHEON PLATES
FIGURE 5FIGURE 3
FIGURE 2FIGURE 1
FIGURE 4
17"
3"
17"
3"
19"
2-3/4"
16-7/8"
3"
17"
2"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 25
CUSTOM ESCUTCHEON PLATES
FIGURE 10FIGURE 9FIGURE 8
17"
2-3/4"
17"
2" 2"
17"
12"
2-1/2"
FIGURE 6 FIGURE 7
2-3/4"
17"
-
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 26
CUSTOM ESCUTCHEON PLATES
FIGURE 15
FIGURE 14FIGURE 13
10-1/2"
2-1/2"
9-1/4"
2-1/4"
8"
2-1/2"
8"
2"
8"
2"
8"
2"
FIGURE 11 FIGURE 12
FIGURE 16