8/10/2019 Marketing_Becoflex with Data Questionnaire.pdf

1/2

BEGG, COUSLAND & CO. LTD.BECOFLEX ROTARY BRUSH SCRUBBER

Begg, Cousland have a unique, long experience in the design and manufacture ofmist eliminators and other gas cleaning equipment.

That 60 years experience is an indication of our capability in our specialist field, butthere are other reasons why choosing a Begg Cousland BECOFLEX system makessense. Our proposal offers you these benefits

The Company Technology oriented ethos Experienced Technical support service Practical advice

The Product

It is a self-cleaning wet gas scrubber, where the gas or air impacts on thespinning brush which is sprayed with the low volume liquid. This dynamic actiongives excellent gas/liquid contact and means the unit can be very compact.

It can handle solids removal with less liquid requirement & effluent thanconventional towers or wet cyclones.

It can use water or any chemical solution for gas absorbtion or odour control. It can be fitted with packings or other 2ndstage equipment for more complex gas

absorbtion duty ( the 1st stage brush having removed any solids blockage risk ). It can do any combination of the above. It acts as its own air moving fan as the brush creates more than just the suction to

overcome its own pressure loss, so not only is no separate fan required, it is

usually easy to retrofit it to existing process lines.

We hope you find this of interest and we hope to advise or make a proposal to you.

An enquiry data form can be found attached.

Contact or visit us at :

Begg, Cousland & Co. Ltd.

Studio 3 Doges, 62 Templeton Street , Glasgow G40 1DA, United Kingdom

Tel: #44 (0)141 556 5288 Fax:#44 (0)141 554 7447

E-mail:sales@beggcousland.com Web Site: www.beggcousland.com

8/10/2019 Marketing_Becoflex with Data Questionnaire.pdf

2/2

BEGG, COUSLAND & CO. LTD.BECOFLEX ROTARY BRUSH SCRUBBER

PROCESS DATA SHEET QUESTIONNAIRE

COMPANYADDRESS

TELEPHONE NUMBERFAX NUMBEREMAILCONTACT NAME

PLEASE PROVIDE AS MUCH OF THE FOLLOWING DATA AS POSSIBLE TOENABLE US TO DESIGN YOUR BECOFLEX SCRUBBER SYSTEM.

1) PROCESS DESCRIPTION

2) SCRUBBER DUTY REQUIRED( REMOVAL OF SOLIDS or ODOUR orGAS ABSORBTION or COMBINEDDUTY OF ABOVE )

3) MAXIMUM GAS/AIR FLOW m/Hr 4) OPERATING TEMPERATURE C

5) OPERATING PRESSURE kPa

6) NATURE OF GAS(ES) - COMPOSITION

7) TYPE OF LIQUID

8) TYPE(S) OF SOLIDS

9) SOLIDS LOADING mg/m

10) PARTICLE SIZES 11) ARE THE SOLIDS SOLUBLE? YES / NO

12) IF THE GASES / LIQUIDS / SOLIDS ARECORROSIVE, DO YOU PREFER ANYPARTICULAR MATERIAL OFCONSTRUCTION?

YES / NO

13) IF THE SOLIDS ARE ABRASIVE, DOYOU WISH ANY PARTICULARTHICKNESS OF MATERIAL, BASED ONPREVIOUS EXPERIENCE?

YES / NO

14) EXIT CONCENTRATION REQUIRED mg/m

ppm